BIG PUTTERS SALE MONARK GOLF SUPPLY
Pinhawk On Lock Putter Head RH ■ The Pinhawk On Lock putter is specifically designed for the armlock putting method. ■ The armlock putting method has been proven to help you maintain better stability in your putting stroke. By anchoring the shaft and grip to your arm, you are eliminating any deviations in shaft angle from setup to impact where most putting errors occur. ■ The Pinhawk On Lock putter is perfectly designed for this USGA approved method of putting. It helps keep your wrist from breaking, and it also helps you keep conscious of a proper rotation of the shoulders. All of this results in giving you the stable stroke you need for solid, consistent putting, and it can help with the dreaded 'yips' too. ■ 7° Loft based on 2° actual loft and 5° forward press ■ Quality CNC Milled face to ensure a perfectly flat striking surface and reduces skidding for truer roll. ■ Non-glaring matte black finish.
T-7 Twin Engine Red Mallet Putter Head - Right Hand ■ The enlarged mallet profile promotes a high MOI (Moment of Inertia) for tremendous stability and forgiveness even on off-center hits. ■ The red head contrasts with the turf to make aiming dramatically easier as the white finish eliminates glare and "hot spots." ■ The white, easy-to-see "basketball court" alignment lines make it easy to aim. ■ Milled Insert Face reduces skidding and promotes truer roll. ■ Assemble with triple-bend putter shaft #SS-91 for 35" standard length putter. ■ Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
T-7 Twin Engine Black Mallet Putter Head - Right Hand ■ The enlarged mallet profile promotes a high MOI (Moment of Inertia) for tremendous stability and forgiveness even on off-center hits. ■ The white head contrasts with the turf to make aiming dramatically easier as the white finish eliminates glare and "hot spots." ■ The black, easy-to-see "basketball court" alignment lines make it easy to aim. ■ Milled Insert Face reduces skidding and promotes truer roll. ■ Assemble with triple-bend putter shaft #SS-91 for 35" standard length putter. ■ Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Armada-2 Mallet Putter Head ■ The Dual Fangs position the clubhead's weight to the perimeter to increase MOI. The results: more stability, more accuracy and better control. The enlarged mallet head with weighted wings moves the Center of Gravity drastically behind the face and towards the perimeter of the head. ■ The extended perimeter weight distribution promotes a high Moment of Inertia to reduce twists upon impact. ■ The popular 2-Ball design with higher contrast makes face-ball-target alignment easier to help stroke more putts into the hole. ■ CNC milled face with aluminum insert face reduces skidding and gets the ball into a pure roll faster. Head is precision cast from durable 431 stainless steel. ■ Assemble with triple-bend putter shaft to make an offset or single-bent shaft for no offset. ■ Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Contacts Us ■ Phone – (877) 551 – 4653 ■ Business Email ID : info@monarkgolf.com ■ Address – P.O.Box 1263,Walnut,CA 91788-1263,U.S.A. ■ Website - https://www.monarkgolf.com/