DRIESNIJDER 45°/46°/44° HELIX, LANG CrN + RADIUS

VHM 3-SNIJDER 45°/46°/44°, LANG WELDON CrN

ARTIKELNUMMER Dc Ds Lc

TTWALU3L06045V 6 6 15

TTWALU3L08045V 8 8 21

TTWALU3L10045V TTWALU3L12045V TTWALU3L14045V TTWALU3L16045V TTWALU3L18045V TTWALU3L20045V TTWALU3L25045V 10 12 14 16 18 20 25 10 12 14 16 18 20 25 24 28 30 35 38 42 50 Lt

57 63 72 83 83 92 92 104 120 r

0.2 0.2 0.3 0.4 0.4 0.5 0.5 0.6 0.6 z

3 3 3 3 3 3 3 3 3

Werkstukmateriaal Materiaal Treksterkte Hardheid Snijsnelheid Vc [m/min] Rm [N/mm²] (HB) min. opt. max.

Aluminium (51ST) Aluminium

3.2315 < 280 3.3547 < 345 Magnesium legering 3.5812 270 - 310 Koper, kortspanig 2.0380 360 - 490

Koper, langspanig

2.0332 290 - 370 Messing, kortspanig 2.1170 > 240 Messing, langspanig 2.1247 410 - 540 Polymides (PA6) Harde vezels (HGW) PVC/PO 50

< 90 95 95 300 450 700 250 400 600 200 285 360 175 225 300 175 225 300 155 200 250 115 155 190 150 200 250 150 200 250 240 260 540

Kosmonaut 11 3824 MK AMERSFOORT Tel. +31 33 461 16 68 www.teo.nl - email: teo@teo.nl

VHM 3-SNIJDER 45°/46°/44°, LANG WELDON CrN

Dc Ap Ae1

Ae2 [2D] [0.4D] [0.6D]

6.0 12.0 2.40 8.0 16.0 3.20 10.0 20.0 4.00 12.0 24.0 4.80 14.0 28.0 5.60 16.0 32.0 6.40 18.0 36.0 7.20 20.0 40.0 8.00 25.0 50.0 10.00

3.60 4.80 6.00 7.20 8.40 9.60 10.80 12.00 15.00 fz1 fz2

0.040 0.050 0.060 0.070 0.080 0.090 0.100 0.120 0.140 0.055 0.075 0.080 0.120 0.130 0.140 0.160 0.180 0.200 Dc

Ap [1.5D]

6.0 9.00 8.0 12.00 10.0 15.00 12.0 18.00 14.0 21.00 16.0 24.00 18.0 27.00 20.0 30.00 25.0 37.50 Ae1 [1D] fz

6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 25.0 0.025 0.030 0.035 0.040 0.050 0.055 0.065 0.080 0.100

Kosmonaut 11 3824 MK AMERSFOORT Tel. +31 33 461 16 68 www.teo.nl - email: teo@teo.nl