Motoristični katalog Leatt GPX 2018 by Motoextreme.si

POW

OR P S R

8 1 0 2

RIDING APPAREL

JERSEYS

PANTS

JACKETS

GLOVES

HELMETS

FUSION

NECK BRACES

KNEE BRACES

FIRST LAYER

HARD BODY PROTECTION

SOFT BODY PROTECTION

LIMB PROTECTION

JUNIOR

100

HYDRATION

118

CASUAL WEAR

126

SIZING

130

MATRIX

134

T THA H C TE ITH D W ED S AN K H C C O STIT E KN . H T ORE L L M A R ES K FO C TAK A B CES N U BO

RIDING APPAREL

LEATT NECK BRACE COMPATIBLE

VENTILATED MESH

ANTIMICROBIAL FABRIC

Leatt’s pursuit of rider safety starts at layer one. Our new gear is tough. Made to take a beating and bounce back. Yet through consistent innovation in fabric construction, better science and smart application of biometric design, Leatt’s new range is lighter and more comfortable than ever. Lightweight, maximum airflow, moisture wicking and quick drying.

Enhanced protection. New levels of ventilation. More durability. Better tactility. Cherry on top? It looks kickass too. Leatt gear is First Line Protection that redefines the aesthetics of the Thrill.

“THE 5.5 GEAR COMES IN A

This fabric contains an antimicrobial agent that inhibits the ability of microorganisms to grow on the surface, thereby reducing odor (uses zinc pyrithion).

WINDPROOF FABRIC

MOISTUREWICKING

ABRASION RESISTANT

Windblock fabric utilizes a windproof layer with maximum breathability and comfort. The fabric protects your body from the chilling effects of nature while still allowing moisture to escape, preventing you from overheating and perspiration build-up.

MoistureCool wicking fabric is a hitech fabric that provides moisture control for your skin. MoistureCool moves perspiration away from your body to the fabric's outer surface where it can evaporate.

Brush Guard is an ultra-thin and fourway flex film that permanently bonds to a material base. It is feather-light and increases scratch and abrasion resistance properties of base material. All Brush Guards are mapped to critical areas of reinforcement.

RANGE OF COOL AND STRIKING COLORWAYS THAT IN MY OPINION LOOK PRETTY SICK. LEATT WERE PUMPED TO UNVEIL THIS NEW KIT AND THAT’S UNDERSTANDABLE. THE 5.5 RANGE IS TOP NOTCH.” – DIRTBIKE RIDER.

GPX 5.5 ULTRAWELD

JERSEY

LEOPARD - Part #5018700(***)

GREY/TEAL - Part #5018700(***)

BLUE/WHITE - Part #5018700(***)

LIME/WHITE - Part #5018700(***)

(110) S | (111) M | (112) L | (113) XL | (114) XXL

(120) S | (121) M | (122) L | (123) XL | (124) XXL

(150) S | (151) M | (152) L | (153) XL | (154) XXL

(140) S | (141) M | (142) L | (143) XL | (144) XXL

5.5

I.K.S PANTS 5018750(500-505)

5.5

I.K.S PANTS 5018750( 510-515)

5.5

I.K.S PANTS 5018750(540-545)

5.5

I.K.S PANTS 5018750(530-535)

Ultra-light, race tight fit, laser-cut MoistureCool stretch mesh with air channels | Perforated Brush Guard protection over elbows | Welded seams at cuff and hem for maximum comfort |Tailored fit for riding with or without body armor |Laser-cut ventilation | Collar design for use with or without a neck brace | Rear silicone pant grip | Size: S-XXL

GPX 4.5 LITE

JERSEY

LIME/TEAL - Part #5018700(***)

BLUE/RED - Part #5018700(***)

BLACK/BRUSHED - Part #5018700(***)

WHITE/BLACK - Part #5018700(***)

(180) S | (181) M | (182) L | (183) XL | (184) XXL

(200) S | (201) M | (202) L | (203) XL | (204) XXL

(160) S | (161) M | (162) L | (163) XL | (164) XXL | (165) 3XL

(190) S | (191) M | (192) L | (193) XL | (194) XXL

NEW 2018

4.5 PANTS 5018750(600-605)

ORANGE/DENIM - Part #5018700(***) (170) S | (171) M | (172) L | (173) XL | (174) XXL

4.5 PANTS 5018750(580-585)

4.5 PANTS 5018750( 570-575)

4.5 PANTS 5018750(550-558)

4.5 PANTS 5018750(590-595)

GPX 4.5 X-FLOW

JERSEY

ORANGE/DENIM - Part #5018700(***)

WHITE/BLACK - Part #5018700(***)

BLUE/WHITE - Part #5018700(***)

RED/WHITE - Part #5018700(***)

(210) S | (211) M | (212) L | (213) XL | (214) XXL

(240) S | (241) M | (242) L | (243) XL | (244) XXL

(230) S | (231) M | (232) L | (233) XL | (234) XXL

(220) S | (221) M | (222) L | (223) XL | (224) XXL

4.5 PANTS 5018750(590-595)

NEW 2018

4.5 PANTS 5018750( 600-605)

4.5 PANTS 5018750(610-615)

GPX 5.5 I.K.S

PANTS

LEOPARD - Part #5018750(***)

GREY/TEAL - Part #5018750(***)

LIME/WHITE - Part #5018750(***)

BLUE/WHITE - Part #5018750(***)

(500) XS/US28/EU46 | (501) S/US30/EU48 | (502) M/US32/EU50

(510) XS/US28/EU46 | (511) S/US30/EU48 | (512) M/US32/EU50

(530) XS/US28/EU46 | (531) S/US30/EU48 | (532) M/US32/EU50

(540) XS/US28/EU46 | (541) S/US30/EU48 | (542) M/US32/EU50

(503) L/US34/EU52 | (504) XL/US36/EU54 | (505) XXL/US38/EU56

(513) L/US34/EU52 | (5014) XL/US36/EU54 | (515) XXL/US38/EU56

(533) L/US34/EU52 | (534) XL/US36/EU54 | (535) XXL/US38/EU56

(543) L/US34/EU52 | (544) XL/US36/EU54 | (545) XXL/US38/EU56

5.5 JERSEY 5018700(110-114)

5.5 JERSEY 5018700( 120-124)

5.5 JERSEY 5018700(140-144)

5.5 JERSEY 5018700(150-154)

GPX 4.5

PANTS

LIME/TEAL - Part #5018750(***)

BLUE/RED - Part #5018750(***)

ORANGE/DENIM - Part #5018750(***)

WHITE/BLACK - Part #5018750(***)

(580) XS/US28/EU46 | (581) S/US30/EU48 | (582) M/US32/EU50

(570) XS/US28/EU46 | (571) S/US30/EU48 | (572) M/US32/EU50

(590) XS/US28/EU46 | (591) S/US30/EU48 | (592) M/US32/EU50

(600) XS/US28/EU46 | (601) S/US30/EU48 | (602) M/US32/EU50

(583) L/US34/EU52 | (584) XL/US36/EU54 | (585) XXL/US38/EU56

(573) L/US34/EU52 | (574) XL/US36/EU54 | (575) XXL/US38/EU56

(593) L/US34/EU52 | (594) XL/US36/EU54 | (595) XXL/US38/EU56

(603) L/US34/EU52 | (604) XL/US36/EU54 | (605) XXL/US38/EU56

NEW 2018

5.5 JERSEY 5018700(180-184)

5.5 JERSEY 5018700( 200-204)

5.5 JERSEY 5018700(170-174)

5.5 JERSEY 5018700(190-194)

GPX 4.5

GPX 5.5 ENDURO

PANTS

GPX 4.5 LITE

JACKET

BLACK/BRUSHED - Part #5018750(***)

BLACK/WHITE - Part #5018750(***)

BLACK/GREY - Part #5018750(***)

BLACK/GREY - Part #5018700(***)

(550) XS/US28/EU46 | (551) S/US30/EU48 | (552) M/US32/EU50 | (553) L/US34/EU52 | (554) XL/US36/EU54

(610) XS/US28/EU46 | (611) S/US30/EU48 | (612) M/US32/EU50

(620) XS/US28/EU46 | (621) S/US30/EU48 | (622) M/US32/EU50

(100) S | (101) M | (102) L | (103) XL | (104) XXL | (105) 3XL

(555) XXL/US38/EU56L | (556) 3XL/US40/EU58 | (557) 4XL/US42/EU60 | (558) 5XL/US44/EU62

(613) L/US34/EU52 | (614) XL/US36/EU54 | (615) XXL/US38/EU56L

(623) L/US34/EU52 | (624) XL/US36/EU54 | (625) XXL/US38/EU56L

NEW 2018

4.5

LITE JERSEY 5018700(160-165)

NEW 2018

4.5 X-FLOW JERSEY RED - 5018700( 220-224) B LU E - 5018700( 230-234)

NEW 2018

GPX 5.5 ENDURO

GPX 4.5 X-FLOW

JACKET

WHITE/BLACK - Part #5017810(***)

KHAKI/BLACK - Part #5017810(***)

ORANGE/BLACK - Part #5017810(***)

BLUE/LIME - Part #5017810(***)

(340) S | (341) M | (342) L | (343) XL | (344) XXL

(350) S | (351) M | (352) L | (353) XL | (354) XXL

(300) S | (301) M | (302) L | (303) XL | (304) XXL

(310) S | (311) M | (312) L | (313) XL | (314) XXL

BLACK/GREY - Part #5017810(***)

BLACK/RED - Part #5017810(***)

LIME/BLUE - Part #5017810(***)

(360) S | (361) M | (362) L | (363) XL | (364) XXL| (365) 3XL

(320) S | (321) M | (322) L | (323) XL | (324) XXL | (325) 3XL

(330) S | (331) M | (332) L | (333) XL | (334) XXL

Water resistant and dirt repellent shell | Pre-curved, zip-off arms with adjustable ventilation | Hydration-ready for 1-3L bladder | Tailored cut for off-road riding with or without body armor | YKK zippers and multi-row safety stitching | Brush Guard fabric protection over elbows | Total of nine pockets, including five water resistant pockets and one touch screen pocket | Front and rear ventilation | Leatt collar works with or without a neck brace | Removable storm collar fits over the neck brace | Rear reflective safety print | Size: S-3XL

ERE’ H T ELY T ‘BAR THA N O I TECT O R P OFF S G U SHR MPS U B THE ES RAP C S AND

3 TYPES OF MATERIAL

GLOVES

WINDBLOCK

LITE

X-FLOW

Windproof Water resistant Four-way stretch

Light material Good airflow Four-way stretch

Mesh material Maximum airflow Four-way stretch

IMPACT PROTECTOR CONFORMS TO CE EN

Our gloves feel like a second skin, yet offer

13594:2015 LEVEL 1

super strength and enhanced comfort.

“THIS MAY BE THE

Engineered with a palm for absolute feel and

BEST GLOVE WE’VE

control of your bike, it’s easy to forget that you’re wearing these ‘barely-there’ gloves.

We use a low profile, energy absorbing solution that stiffens upon impact to provide

It’s the stealth glove gone undercover!

protection. It flexes around the body’s form in

USED IN YEARS.”

4 LEVELS

NANOGRIP/ARAMID Nano fiber technology Fibers 7.500 times thinner than hair Very stretchy and flexible Ultra-thin for maximum bike feel Premium dry and wet grip 2x Aramid reinforced lower palm Touch screen optimized fingers

– DIRTBIKE

its natural state, but stiffens upon impact to offer world-class impact protection.

We also made use of the totally unique NanoGrip palm material, known for its durability, breathability

NANOGRIP REINFORCED Nano fiber technology Fibers 7.500 times thinner than hair Very stretchy and flexible Ultra-thin for maximum bike feel Premium dry and wet grip Reinforced lower palm Touch screen optimized fingers

and superior wet and dry grip properties. It simply cannot be compared to anything else out there. NATURAL STATE

4 LEVELS OF

Each fiber of the NanoGrip is 7,500 times thinner than a human hair, making it super comfy and touch screen compatible. All of this paired with a four-way stretch, breathable upper-hand material, you can

OF PALMS

NANOGRIP Nano fiber technology Fibers 7.500 times thinner than hair Very stretchy and flexible Ultra-thin for maximum bike feel Premium dry and wet grip Touch screen optimized fingers

see why it is a big deal. A new addition to the line is a MicronGrip palm. WHEN IMPACT IS INTRODUCED

MICRONGRIP

PROTECTION

Super slim with superior handlebar feel Excellent dry and wet grip Very durable with touch screen function Ultra-thin for maximum bike feel Silicone grip print

GPX 5.5 WINDBLOCK

GPX 5.5 LITE

GLOVE

GPX 4.5 LITE

GLOVE

BLACK/GREY - Part #6017310(***)

BLACK/WHITE - Part #6017310(***)

LIME/TEAL - Part #6018400(***)

BLUE/RED - Part #6018400(***)

(851) S | (852) M | (853) L | (854) XL | (855) XXL

(841) S | (842) M | (843) L | (844) XL | (845) XXL

(800) S | (801) M | (802) L | (803) XL | (804) XXL

(820) S | (821) M| (822) L | (823) XL | (824) XXL

Features

1-5

Features

Protection

Lightweight

Ventilation

Features

Windblock

Protection

Palm

Lightweight

3D molded impact protection for: knuckles, fingers, thumb and upper hand| NanoGrip palm: ultra-thin for superior bike feel, Nano fiber technology 7.500 times thinner than hair, very stretchy and flexible, premium dry and wet grip | Touch screen function | WindBlock upper-hand material | CE tested and certified as: Personal Protective Equipment 89/686/EEC , Knuckle Impact protection EN 13594:2015 | Pre-curved, snug fit and seamless palm with critical Aramid reinforcement | Seamless, welded Airprene cuff | Multi-ply, nylon thread stitching | Microinjected cuff-restraint | Size: S-XXL

NEW 2018

1-5

3D molded impact protection for: knuckles, fingers, thumb and upper hand | NanoGrip palm: ultra-thin for superior bike feel, Nano fiber technology 7.500 times thinner than hair, very stretchy and flexible, premium dry and wet grip | Touch screen function | Vented, Lite upper-hand material | CE tested and certified as: Personal Protective Equipment 89/686/EEC, Knuckle Impact protection EN 13594:2015 | Pre-curved, snug fit and seamless palm with critical Aramid reinforcement | Seamless, welded Airprene cuff | Multi-ply, nylon thread stitching | Microinjected cuff-restraint | Size: S-XXL

1-5

Ventilation

Windblock

Palm

PALM

3D molded impact protection for knuckles and fingers | NanoGrip palm: ultra-thin for superior bike feel, Nano fiber technology 7.500 times thinner than hair ,very stretchy and flexible, premium dry and wet grip | Vented, Lite upper-hand material | CE tested and certified as: Personal Protective Equipment 89/686/EEC, Knuckle Impact protection EN 13594:2015 | Pre-curved, snug fit and seamless palm reinforced with synthetic suede | Microinjected cuff restraint | Multi-ply, nylon thread stitching | Size: S-XXL

GPX 4.5 LITE

BLACK/WHITE - Part #6018400(***) (760) S | (761) M | (762) L | (763) XL | (764) XXL

Features

1-5

Protection

Lightweight

Ventilation

Windblock

Palm

GPX 3.5 LITE

GLOVE

NEW 2018

ORANGE/DENIM - Part #6018400(***) (780) S | (781) M | (782) L | (783) XL | (784) XXL

NEW 2018

GLOVE

GREY/TEAL- Part #6018400(***) (720) S | (721) M | (722) L | (723) XL | (724) XXL

NEW 2018

BLACK/BRUSHED - Part #6018400(***) (640) S | (641) M | (642) L | (643) XL | (644) XXL

NEW 2018

Features

PALM

1-5

Protection

Lightweight

Ventilation

Windblock

Palm

AirGel knuckle impact protection | NanoGrip palm: ultra-thin for superior bike feel, Nano fiber technology 7.500 times thinner than hair, very stretchy and flexible, premium dry and wet grip | Vented, Lite upper-hand material | CE tested and certified as: Personal Protective Equipment 89/686/EEC, Knuckle Impact protection EN 13594:2015 | Microinjected 3D Brush Guard reinforced pinky and knuckles | Pre-curved, snug fit and seamless palm | Soft touch cuff restraint | Multi-ply, nylon thread stitching | Size: S-XXL

GPX 3.5 LITE

GPX 2.5 X-FLOW

GLOVE

WHITE/BLACK - Part #6018400(***) - (740) S | (741) M | (742) L | (743) XL | (744) XXL

ORANGE/DENIM - Part #6018400(***) - (660) S | (661) M | (662) L | (663) XL | (664) XXL

GLOVE

BLUE/RED - Part #6018400(***) - (540) S | (541) M | (542) L | (543) XL | (544) XXL

LIME/TEAL - Part #6018400(***) - (580) S | (581) M | (582) L | (583) XL | (584) XXL

PALMS

ORANGE/DENIM - Part #6018400(***) - (600) S | (601) M | (602) L | (603) XL | (604) XXL LIME/BLUE - Part #6018400(***) - (700) S | (701) M | (702) L | (703) XL | (704) XXL

PALMS

BLACK/WHITE - Part #6018400(***) - (620) S | (621) M| (622) L | (623) XL | (624) XXL

BLUE/WHITE - Part #6018400(***) - (680) S | (681) M | (682) L | (683) XL | (684) XXL

Features

1-5

Features

Protection

1-5 2

Lightweight

Ventilation

Windblock

Palm

PALMS

Microinjected 3D Brush Guard reinforced pinky and knuckles | MicronGrip Palm: super slim with superior handlebar feel, excellent dry and wet grip, very durable with touch screen function, silicone grip print | Fully vented X-Flow mesh upper-hand material | Pre-curved, snug fit and seamless palm | Multi-ply, nylon thread stitching | Size: S-XXL

GPX 1.5 GRIP R

GLOVE

LEOPARD - Part #6018400(***) - (400) S | (401) M | (402) L | (403) XL | (404) XXL

EQUALIZER - Part #6018400(***) - (420) S | (421) M | (422) L | (423) XL | (424) XXL

NEW 2018

TATTOO - Part #6018400(***) - (460) S | (461) M | (462) L | (463) XL | (464) XXL

NEW 2018

PALMS

NEW 2018

1-5

Protection

Lightweight

Ventilation

Windblock

Palm

NEW 2018

PALMS

BONES - Part #6018400(***) - (500) S | (501) M | (502) L | (503) XL | (504) XXL

SKULL - Part #6018400(***) - (440) S | (441) M | (442) L | (443) XL | (444) XXL

Features

ART - Part #6018400(***) - (480) S | (481) M | (482) L | (483) XL | (484) XXL

NEW 2018

PALMS

COLLEGE - Part #6018400(***) - (520) S | (521) M | (522) L | (523) XL | (524) XXL

NEW 2018

PALMS

PALMS PALMS

MicronGrip Palm: super slim with superior handlebar feel:, excellent dry and wet grip, very durable with touch screen function, silicone grip print | Pre-curved, snug fit and seamless palm | Vented, Lite upper-hand material | Multi-ply, nylon thread stitching | Size: S-XXL

T LME E H THE EST T H S CRA S MIE M U D F M O A E DR

360°

TURBINE TECHNOLOGY TURBINES DEFORM TO ABSORB VERTICAL AND ROTATIONAL IMPACT FORCES So much science goes into Leatt helmets, you’d expect it to come with a degree!

REDUCES ROTATIONAL ACCELERATION AND LINEAR G-FORCES AT LOW SPEED WHICH LOWERS THE RISK OF CONCUSSION SIGNIFICANTLY ROTATIONAL ACCELERATION rad/s^2

7000 6000 5000 4000 3000 2000 1000 0

For starters, there’s Leatt’s category-defining 360° Turbine Technology. Molded from an energy-absorbing material that an energy absorbing material that instantly

LINEAR G-FORCES

hardens on impact – the disc-shaped implants, strategically positioned inside the helmet, dissipate rotational, direct and deflective impact energy, resulting in radically reduced head and brain injury. It’s the wisest safety choice the no-holds-barred Thrill seeker could make.

m/s

TURBINE

m/s

NO TURBINE

MAXIMIZED

REDUCED OUTER SHELL VOLUME

VENTILATION

REL A TI VE BRA I N TO SKU L L MO VEMENT WITH A NORM AL HE LME T DURING IMPAC T

Regardless of the speed, Leatt helmets

facilitate

all-round

ventilation – even at lower speeds - Effective even at very low speeds - Optimized for off-road racing

On impact the brain and helmet are aligned

The helmet reacts to impact first

Followed by the brain

REL A TI VE BRA I N TO SKU L L MO VEMENT WITH A LE ATT ® HE LM E T DURING IMPAC T

On impact the brain and helmet are aligned

The helmet reacts to impact first

Followed by the brain

OUR OUTER SHELL IS 10% SMALLER, TRANSFERRING UP TO 20% LESS ROTATIONAL FORCES TO THE NECK, HEAD AND BRAIN 38

“THIS COULD VERY WELL BE THE MOST VENTILATED HELMET WE’VE EVER WORN.” – TRANSWORLD MX. 39

GPX 6.5 CARBON

HELMET

V16 CARBON/ORANGE (DOT/ECE)) - Part #1017110(***)

V16 CARBON/SILVER (DOT/ECE) - Part #1017110(***)

(010) XS 53-54cm | (011) S 55-56cm | (012) M 57-58cm | (013) L 59-60cm | (014) XL 61-62cm | (015) XXL 63-64cm

(020) XS 53-54cm | (021) S 55-56cm | (022) M 57-58cm | (023) L 59-60cm | (024) XL 61-62cm | (025) XXL 63-64cm

V16 CARBON/WHITE (DOT/ECE) - Part #1017110(***) (030) XS 53-54cm | (031) S 55-56cm | (032) M 57-58cm | (033) L 59-60cm | (034) XL 61-62cm | (035) XXL 63-64cm

Carbon shell in three sizes | 360° Turbine Technology: reduces up to 30% of head impact at concussion level and up to 40% of rotational acceleration to head and brain | Reduced Outer Shell Volume: a 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain | Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner | Optimal Neck Brace Compatibility | Maximized ventilation optimized for off-road racing and effective even at very low speeds| Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: DOT+ECE | Weight: from 1.270g (2.80lbs)

GPX 5.5 COMPOSITE

HELMET

V10 BLUE/WHITE (ECE) - Part #1018100(***)

V10 LIME/WHITE (ECE) - Part #1018100(***)

(110) XS 53-54cm | (111) S 55-56cm | (112) M 57-58cm | (113) L 59-60cm | (114) XL 61-62cm | (115) XXL 63-64cm

(120) XS 53-54cm | (121) S 55-56cm | (122) M 57-58cm | (123) L 59-60cm | (124) XL 61-62cm | (125) XXL 63-64cm

Composite shell in three sizes | 360Â° Turbine Technology: reduces up to 30% of head impact at concussion level and reduces up to 40% of rotational acceleration to head and brain | Reduced Outer Shell Volume: 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain | Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-LexÂŽ moisture wicking, breathable, anti-odor and washable inner liner | Optimal Neck Brace Compatibility | Maximized ventilation optimized for off-road racing and effective even at very low speeds | Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: ECE 2205 or DOT | Weight: ECE from 1050g (2.31 lbs) | ECE/DOT from 1.295g (2.85 lbs)

GPX 5.5 COMPOSITE

HELMET

V11 GREY/TEAL (ECE) - Part #1018100(***)

V15 WHITE/RED (ECE) - Part #1017110(***)

(100) XS 53-54cm | (101) S 55-56cm | (102) M 57-58cm | (103) L 59-60cm | (104) XL 61-62cm | (105) XXL 63-64cm

V15 BLACK/WHITE (ECE) - Part #1017110(***)

GHOST SATIN (ECE) - Part #1017110(***)

(060) XS 53-54cm | (061) S 55-56cm | (062) M 57-58cm | (063) L 59-60cm | (064) XL 61-62cm | (065) XXL 63-64cm

(400) XS 53-54cm | (401) S 55-56cm | (402) M 57-58cm | (403) L 59-60cm | (404) XL 61-62cm | (405) XXL 63-64cm

GPX 5.5 COMPOSITE

HELMET

GPX 4.5

HELMET

SOLID WHITE (ECE) - Part #1017110(***)

V25 BLUE/WHITE(ECE) - Part #1018200(***)

(410) XS 53-54cm | (411) S 55-56cm | (412) M 57-58cm | (413) L 59-60cm | (414) XL 61-62cm | (415) XXL 63-64cm

(130) XS 53-54cm | (131) S 55-56cm | (132) M 57-58cm | (133) L 59-60cm | (134) XL 61-62cm | (135) XXL 63-64cm

NEW 2018

SOLID BLACK (ECE) - Part #1017110(***) (420) XS 53-54cm | (421) S 55-56cm | (422) M 57-58cm | (423) L 59-60cm | (424) XL 61-62cm | (425) XXL 63-64cm

Injected Polymer Compound Shell in three sizes | 360° Turbine Technology: reduces up to 30% of head impact at concussion level and reduces up to 40% of rotational acceleration to head and brain | Reduced Outer Shell Volume: a 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain | Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner | Optimal Neck Brace Compatibility | Maximized Ventilation Optimized for Off-Road racing and effective even at very low speeds | Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: ECE 2205 or DOT | Weight: ECE from 1150g, DOT from 1300g (2.86 lbs)

GPX 4.5

HELMET

V22 LIME/TEAL (ECE) - Part #1018200(***)

NEW 2018

(120) XS 53-54cm | (121) S 55-56cm | (122) M 57-58cm | (123) L 59-60cm | (124) XL 61-62cm | (125) XXL 63-64cm

V22 BLUE/RED (ECE) - Part #1018200(***) (140) XS 53-54cm | (141) S 55-56cm | (142) M 57-58cm | (143) L 59-60cm | (144) XL 61-62cm | (145) XXL 63-64cm

V20 ORANGE/DENIM (ECE) - Part #1018200(***)

NEW 2018

(100) XS 53-54cm | (101) S 55-56cm | (102) M 57-58cm | (103) L 59-60cm | (104) XL 61-62cm | (105) XXL 63-64cm

NEW 2018

V20 WHITE/BLACK (ECE) - Part #1018200(***) (110) XS 53-54cm | (111) S 55-56cm | (112) M 57-58cm | (113) L 59-60cm | (114) XL 61-62cm | (115) XXL 63-64cm

NEW 2018

GPX 4.5

HELMET

V24 BLACK/BRUSHED (ECE) - Part #1018200(***)

SOLID WHITE (ECE) - Part #1017110(***)

(150) XS 53-54cm | (151) S 55-56cm | (152) M 57-58cm | (153) L 59-60cm | (154) XL 61-62cm | (155) XXL 63-64cm

(120) XS 53-54cm | (121) S 55-56cm | (122) M 57-58cm | (123) L 59-60cm | (124) XL 61-62cm | (125) XXL 63-64cm

SATIN BLACK (ECE) - Part #1017110(***) (110) XS 53-54cm | (111) S 55-56cm | (112) M 57-58cm | (113) L 59-60cm | (114) XL 61-62cm | (115) XXL 63-64cm

ACCESSORIES

HELMETS

GPX 6.5/5.5 WINTER KIT

GPX 5.5/6.5 VENT BLOCK KIT

HYDRATION KIT

Part #1015500500

Part #1015500510

Part #1015500550

GPX 4.5 WINTER KIT

GPX 4.5 VENT BLOCK KIT

Part #5017300201

Part #5017300200

BITE VALVE Part #1015500600

FUSION Our first-of-its-kind Fusion protector covers your neck, chest,

back, flank and shoulders in one easy go. A protective unit that

IMPACT TESTED AND CE CERTIFIED

provides uncompromising safety and peace of mind without impeding ability or performance.

ENHANCED COMFORT

NECK

CHEST

CENTRAL PIVOTING DESIGN

FLANK PROTECTION

BACK

SHOULDERS

FUSION 3.0

FUSION SNX 3.0

VEST

BLACK - Part #1015400(***) - (100) S/M 160-172cm | (101) L/XL 172-184cm | (102) XXL 184-196cm

ISR ORANGE - Part #1015400(***) - (200) S/M 160-172cm | (201) L/XL 172-184cm | (202) XXL 184-196cm

WHITE - Part #1015400(***) - (110) S/M 160-172cm | (111) L/XL 172-184cm | (112) XXL 184-196cm

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as Personal Protective Equipment 89/686/EEC | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Shoulder EN1621-1| Flank protection | FFM-French Federation Certified | Easy-to-use, no-tool, sizing adjustments and three-dimensional design for perfect fit and comfort | Weight: 2.500g | Unisex Fit: S/M- XXL (160-196cm)

BLACK - Part #1015400(***) - (210) S/M 160-172cm | (211) L/XL 172-184cm | (212) XXL 184-196cm

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as Personal Protective Equipment 89/686/EEC | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Shoulder EN1621-1 | Flank protection | ISR Certified for Snowmobile racing | Arctic Fusion Compound â&#x20AC;&#x201C; AFC (TM). Special material blend to withstand extremely cold conditions | Easy-to-use, no-tool, sizing adjustments and three-dimensional design for perfect fit and comfort | Weight: 2.500g | Unisex Fit: S/M-XXL (160-196cm)

L NTIA E T R PO U O Y ISK. R X A E M E TH Z I M HAD INI E M C N AND SCIE ? D I SA RING O O H B W E TO B

THE LEATT

new entry-level GPX 3.5 offering premium protection at an affordable price, we have a neck brace for every type of rider. What makes our neck brace so legendary is the function of directing the crash forces from your helmet to your body and bypassing your neck, which is called Alternative Load Path Technology - ALPT®. We also believe that no other neck brace can be adjusted to fit riders as well as a LeattBrace® can.

BETTER.” - TREY CANARD

17% REDUCTION

carbon GPX 6.5 for pro racing, to our brand

AND IT HAS ONLY GOTTEN 20% REDUCTION

tested tech innovations. From the ultra-light

21% REDUCTION

stops redefining neck protection with new lab-

BRACE FOR ELEVEN YEARS NOW

17% REDUCTION

Renowned for our Leatt-Brace®, Leatt never

“I’VE BEEN IN THE LEATT NECK

Results from Leatt®’s in-house laboratory testing 46% REDUCTION

BRACE

% REDU CTI O N I N F O RCE S CO M P A RE D TO NO BRA C E

NECK

BRAC E V S N O B R A C E

The semi-rigid chassis is adjustable enough to fit most riders’ body shape while the structure remains very rigid to help transmit energy during an impact, which is key for reducing neck forces.

COLLAR BONE RELIEF

DESIGNED HYPER EXTENSION

POSTERIOR HYPERTRANSLATION

HYPERFLEXION

LATERAL HYPER FLEXION

COUPLED AXIAL LOADING

Hyperextension: Over-bending of the head in rearward direction. Posterior Hypertranslation: Extreme movement of head and helmet, rearward on the neck. Hyperflexion: Over-bending of the head in forward direction. Lateral Hyperflexion: Over-bending of the head to one side. Coupled Axial Loading: Helps prevent axial loading only when the axial forces act in combination with other mechanisms.

TO BREAK

SO YOU DON’T

“I ALWAYS CHOOSE THE BEST TO PROTECT MYSELF, AND LEATT MAKES GREAT STUFF. THE QUALITY IS TOP-NOTCH, AND THE NECK BRACE IS ALWAYS PART OF MY KIT – I CAN’T RIDE WITHOUT IT.” - XAVIER DE SOULTRAIT

3.5 N E C K

BRACE ON HOOKS

THORACIC COMPLETELY REMOVABLE

CO-MOLDED PIVOT

FOR EASY STORAGE

BRACE Leatt takes vital injury avoidance to a new standard. Light, robust and packed with Leatt Lab® innovation, the new 3.5 Neck Brace is bio-designed to reduce risk of serious neck injury by up to 43%.

LIGHTWEIGHT EPS BASE

A semi-rigid, adjustable chassis absorbs

CONSTRUCTION

impact and reduces shock force significantly. The neck brace also features a collarbone cutout feature designed to protect fragile bones. Constructed from super lightweight

ADJUSTABLE THORACIC

material to maximize rider comfort, the

2 x POSITIONS

3.5 Neck Brace is CE certified – giving you extra edge when you need to take that unexpected leap of faith.

INTEGRATED SPRING

INTERNAL REINFORCED

LOADED OPEN BUTTON

POLYAMIDE CORE STRUCTURE

INJECTED EVA PADDING

INTERGRATED BODY STRAP SLOTS

GPX 3.5

6.5 CARBON N E C K B R A C E

NECK BRACE

BLACK - Part #1018100(***) - (221) S/M | (222) L/XL

WHITE - Part #1018100(***) - (241) S/M | (242) L/XL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | In-molded PC shell with a polyamide reinforced EPS construction for lowest possible neck forces | CoreFlex split rear removable thoracic strut is more comfortable and designed to work with the bodyâ&#x20AC;&#x2122;s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Optimal helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion | Adjustable Thoracic to ensure optimum fit | Sculptured, split front for improved comfort and fit | Ergonomically positioned open/closure system | Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Air flow ribbed body padding for optimum ventilation | Free, optional clear chest strap included | CE tested and certified as Personal Protective Equipment 89/686/EEC | Weight: 575g | Please look at our sizing chart for best fit: S/M-L/XL

CARBON/BLACK - Part #1015100(***) - (100) S/M | (101) L/XL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of Carbon matrix for lowest possible neck forces | CoreFlex split rear folding thoracic strut is more comfortable and designed to work with the bodyâ&#x20AC;&#x2122;s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Optimal helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion | Three-way adjustability and sliding front and rear SureFit adjusters to ensure optimum fit | Three-angle rear thoracic strut adjustments to fit most body shapes | Sculptured, split front for improved comfort and fit | Low profile push-button open/ closure system | Easy-to-use emergency release mechanism for injured riders | Engineered collarbone cutout to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Air flow ribbed body padding for optimum ventilation | Free, optional clear chest strap included | CE tested and certified as Personal Protective Equipment 89/686/EEC | Weight: from 600g | Please look at our sizing chart for best fit: S/M-L/XL

GPX 5.5

NECK BRACE

BLACK - Part #1017010(***) - (110) S/M | (111) L/XL

LIME - Part #1017010(***) - (130) S/M | (131) L/XL

WHITE - Part #1017010(***) - (120) S/M | (121) L/XL

ORANGE - Part #1017010(***) - (140) S/M | (141) L/XL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of reinforced polyamide for lowest possible neck forces | CoreFlex split rear folding thoracic strut is more comfortable and designed to work with the bodyâ&#x20AC;&#x2122;s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Optimal helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion | Three-way adjustability and sliding front and rear SureFit adjusters to ensure optimum fit | Four-angle rear thoracic strut adjustments to fit most body shapes | Sculptured, split front for improved comfort and fit | Low profile push-button open/closure system | Easy-to-use emergency release mechanism for injured riders | Engineered collarbone cutout to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Air flow ribbed body padding for optimum ventilation | Free, optional, clear chest strap included | CE tested and certified as Personal Protective Equipment 89/686/EEC | Weight: from 790g | Please look at our sizing chart for best fit: S/M-L/XL

STX RR

NECK BRACE

CARBON - Part #1000210050 | L/XL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of Carbon matrix for lowest possible neck forces | CE tested and certified as Personal Protective Equipment 89/686/EEC | Over-the-head fitting with emergency releases on each side | Race adopted front construction for tucking behind the windscreen | Hammock-style rubber chin pad for increased comfort and safety | Correct side clearance for race cornering | Adjusts to fit all riding suits and selections of armor | Free, optional, chest strap included | Weight: from 690g | One size fits riders from approximately: 60 – 100kg (140 – 225 lbs)

STX ROAD

NECK BRACE

SNX TROPHY

NECK BRACE

SNX 5.5

NECK BRACE

BLACK/GREY/YELLOW - Part #0100030(***)

BLACK/ORANGE - Part #1014040(***)

BLACK/ORANGE- Part #1017010(***)

(101) S/M | (102) L/XL | (103) XXL

(010) S/M | (011) L/XL | (012) XXL

(190) S/M | (191) L/XL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of reinforced polyamide for lowest possible neck forces | CE tested and certified as Personal Protective Equipment 89/686/EEC | Optimized fit for wearing over riding gear | Unique rear scapula wings designed to accommodate back armor or aerodynamic hump | Folding rear scapula wings allow for easy carrying/storage | Motorcyclist Magazine says: “So comfortable you soon forget you have it on.” | Integrated padding accommodates movement for over-the-shoulder views | Rubber-coated front tip helps prevent motorcycle body scratches | Jacket zipper relief | Comes with optional strap system | Replacement parts available | Adjustable sizing to fit most riders | Weight: from 790g | Please look at our sizing chart for best fit and remember to measure your size outside your garments/protection

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of AFC – Arctic Fusion Compound for lowest possible neck forces | Molded padding solution for extra low profile | Five-hole scapula wing sliders for better adjustment | Scapula wings adopt to the outside of jacket and protectors | Weight: from 790g | Please look at our sizing chart for best fit: S/M-XXL

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of AFC – Arctic Fusion Compound for lowest possible neck forces | Threeway adjustability | Sliding front and rear SureFit adjusters to ensure optimum fit | Four-angle rear thoracic strut adjustments to fit most body shapes | Sculptured, split front for improved comfort and fit | CoreFlex split rear thoracic strut is more comfortable and designed to work with the body’s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Low profile push-button open/closure system | Easy-to-use emergency release mechanism for injured riders | Engineered collarbone cutout to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Free, optional, chest strap included | Weight: from 790g | Please look at our sizing chart for best fit: S/M-L/XL

AND E C CIEN S H E R MES E WHE C N RMA O F PER

X-FRAME

CE TESTED AND

NEXT LEVEL

PAIR - Part #5018010 - (101) S | (102) M | (103) L | (104) XL LEFT - Part #5018010 - (121) S | (122) M | (123) L | (124) XL RIGHT - Part #5018010 - (141) S | (142) M | (143) L | (144) XL

CERTIFIED AS IMPACT The X-Frame Knee Brace is the next step in the evolution of Leatt’s

Because the knee isn’t asymmetric, neither is our X-Frame Knee

legendary brace range. Applied science has resulted in a device

Brace.The inner hinge is more delicate and 40% slimmer, allowing

that reduces impact force further whilst protecting the vulnerable

for better bike feel for the rider. The outer hinge is more robust –

knee joint more than before.

finely machined and ready to meet bone-jarring bumps head-on.

ASYMETRIC HINGE SYSTEM TO GET THOSE KNEES

RUGGED GEARED HINGE DESIGN TO TAKE ALL THE

AS CLOSE TO THE TANK AS POSSIBLE

PRESSURE AND KNOCKS ON THE RIDE

KNEE BRACE

PROTECTION KNEE EN1621-1

HYPER EXTENSION INSIDE

LIMITATIONS 5º, FOR ACL INJURY REDUCTION

The X-Frame is rigged with an easy-strap system. Interchangeable hinge padding sizes

Knee Brace can be trusted to do both – hence its CE rating as both medical device and

and a low-profile shin bone pad designed to fit all boots are further pluses.

top-rated impact protection.

It’s critical that a knee brace performs faultlessly and consistently. The Leatt X-Frame

10º, 15º AND 20º

Injected Carbon Composite Frame | Asymmetrical Hinges | 40% slimmer inner hinge for superior bike feel | Metal geared outer hinge for precise movement and durability | Reduction of forces to limit knee injuries: ACL, Meniscus and MCL | Certified as medical device: EU CA014741 , USA FDA 10048761 | CE tested and certified as impact protection: Knee EN1621-1 | Hyper extension limitations 5º, 10º, 15º and 20º for ACL injury reduction | Fixed hyper flexion stoppers for meniscus injury reduction | Low profile shin bone pad that fits inside all boots | Comfortable and easy fitting strap system | Customized fit with interchangeable hinge padding sizes | Size: S-XL

C-FRAME PRO CARBON

MEDICALLY CERTIFIED

KNEE BRACE

PAIR - Part #5017010(***) - (100) S/M | (101) L/XL | (102) XXL LEFT - Part #5017010(***) - (110) S/M | (111) L/XL | (112) XXL RIGHT - Part #5017010(***) - (120) S/M | (121) L/XL | (122) XXL

KNEE PROTECTION A knee injury is one of the most frustrating injuries and can be a major setback. Although no knee brace can protect you completely from injury, our new C-Frame Pro Knee Braces promise a high level of protection. Anatomically correct in design, it offers premium knee protection and allows for natural knee movement and is certified as medical device: EU CA014741 | USA FDA 10048761.

THREE-POINT FORCE DISTRIBUTION WITH SUPER STIFF FORGED C-ARM MONO HINGE

HYPER EXTENSION LIMITATIONS 10º, 15º, 20º AND 25º FOR ACL INJURY REDUCTION

CONSTRUCTION

CE TESTED AND CERTIFIED AS IMPACT PROTECTION KNEE EN1621-1

“I AM PROUD TO HAVE BEEN PART OF THE LEATT FAMILY SINCE 2009. THEY MAKE OUR SAFETY THEIR PRIORITY.” – JOHNNY AUBERT.

ENGINEERED, LAB TESTED BUILT-IN FRACTURE POINTS FOR THE SHIN AND THIGH BONE

Super stiff, mono-hinge frame with three-point force distribution | Very low-profile inner knee for superior bike feel | Reduction of forces to limit knee injuries: ACL, Meniscus and MCL | Certified as medical device: EU CA014741, USA FDA 10048761 | CE tested and certified as impact protection: Knee EN1621-1 | Hyper extension limitations 10º, 15º, 20º and 25º for ACL injury reduction | Fixed hyper flexion stoppers for meniscus injury reduction | Engineered, lab tested built-in fracture points | The C-Frame chassis breaks before injuring: The shin bone (Tibia) or the thigh bone (Femur) | Comfortable, low-profile shin bone plate with load distribution pad that fits inside all boots | Please look at the product video, fitting video and biomedical white paper | Please look at our sizing chart for best fit: S/M-XXL

FIRST LAYER

KNEE BRACE PANTS

Part #5017010(***) - (140) XS/S (141) M/L | (142) XL/XXL

KNEE BRACE SOCKS PAIR - Part #5017010(***) - (150) S | (151) M | (152) L

KNEE BRACE SLEEVE PAIR - Part #5015100(***) (100) S/M | (101) L/XL | (102) XXL

ROOST TEE

BLACK - Part #5018304(***)

IMPACT SHORTS GPX 5.5 AIRFLEX - Part #5016000(***)

(201) S/M | (202) L/XL | (203) XXL

(201) S | (202) M | (203) L | (204) XL | (205) XXL

Extra-long sleeve that folds over the brace and prevents slipping | New anti-odor, MoistureCool and Wicking fabric | Flatlock stitching for extra comfort

Super slim, 3D molded impact protection | CE tested and certified as impact protection: Hip EN1621-1 Level 1 | Upper hip padding | Thigh padding | Coccyx/tailbone padding (removable) | Extra wide with comfortable waist stretch | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Silicone printed elastic leg cuffs | Pre-shaped 3D design for better fit and function | Sizes: S-XXL SOCKS GPX PAIR - Part #5017010(***)

KIDNEY BELT 3DF 3.5 - Part #5016000(***)

(160) S | (161) M | (162) L

(100) S/M | (101) L/XL | (102) XXL/3XL

3D knitted long socks with reinforced ankle, heel and instep sections | Super soft knitted top Retains knee braces in correct position and helps prevent any knee brace from slipping down | Strategically placed knee brace reinforcement panels | Flatlock stitching for extra comfort | New anti-odor MoistureCool and AirMesh wicking fabrics | Super soft knitted waistband with silicone grip | Knee alignment design | Velcro adjustable brace cover sock | Designed for all knee brace brands.

Full-length knee brace sock with reinforced ankle, heel and instep sections | MoistureCool upper and X-Flow mesh back | Silicone printed, non-slip cuffs | Flatlock stitching for extra comfort

3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Lumbar EN1621-2 Level 1 | Dual action elastic closure for maximum support | Thermo foamed 3D air channels for maximum ventilation | Extra wide and comfortable waist stretch | Unisex sizes

ODY B R YOU H S N PU THA R E D HAR DED N E NT RE I U T NA

BODY

ARMOR Warrior-like cladding for the rider going into battle.

"THE THAT

FIRST IT

THING

FITS

NOTICED

BETTER

THAN

ABOUT A

THE

GLOVE

PROTECTOR .

.HAVING

THE

LEATT NECK BRACE

PROTECTOR ON INSTILLED A GREAT REASSURING FEELING ABOUT THE PROTECTION IT OFFERED." – VITAL MX

Hard shell and soft impact foam combine to create an impenetrable barrier – affording maximum chest, back and shoulder protection. Keep your cool thanks to the multiple strategically

SOFT & SAFE

positioned ventilation slots.

3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder,

Push your body harder than ever before.

energy-absorbing protector upon impact. This protector conforms to many body shapes and is CE certified to the highest levels on chest and

3DF PERFORATED

FORCE INTRODUCTION

FOAM REACTION

back impact protection.

HARD & HARDY

IMPACT FOAM Made of high density poly ethylene (HDPE) for high impact or stone deflection, the hard shell range can handle it. Assisted by articulating hard shell panels,

VENTILATED ARTICULATING

the range gets greater natural movement due to the improved rotational axis and better ventilation through smaller individual panels.

COMPATIBLE

PANEL SYSTEM

5.5

4.5

BODY PROTECTOR

BLACK - Part #5015400(***)

WHITE - Part #5015400(***)

(100) S/M 160-172cm | (101) L/XL 172-184cm | (102) XXL 184-196cm

(110) S/M 160-172cm | (111) L/XL 172-184cm | (112) XXL 184-196cm

5.5 PRO HD

BODY PROTECTOR

BLACK - Part #5016400(***)

BLACK - Part #5014101(***) - (101) ADULT 70 to 90 kg (150 to 198 lbs) | (103) XXL 90 – 130kg (198 to 286 lbs)

(100) S/M 160-172cm | (101) L/XL 172-184cm | (102) XXL 184-196cm

WHITE - Part #5014101(***) - (102) ADULT 70 to 90 kg (150 to 198 lbs)

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 | Back EN1621-2 Level 2 | Elbow and Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Total Leatt® protection score of 25 points | Multi-layer, multi-plate articulating design | Mesh base layer | Kidney belt with height adjustability for best body fit | Adjustable flank panels add side protection | Our 3D design ensures a great fit that is very comfortable | 53 ventilation slots for maximum cooling | New anti-odor MoistureCool and AirMesh wicking fabrics | FlipFit front and rear function and BraceOn™ neck brace fitting system allows over and under the shirt fitting with Leatt® neck braces | Weight: 2.500g – 5.5 lbs

CHEST PROTECTOR

1-5

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Premium Hard Shell Body Protector with 3DF AirFit Impact Foam | Total Leatt® protection score of 19 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 , Elbow and Shoulder EN1621-1 | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | New anti-odor MoistureCool and AirMesh wicking fabrics | Removable front and rear plate function and BraceOn™ neck brace fitting | system for over / under shirt Leatt® neck brace fit | Weight: 2.100g | Unisex Fit: S/M-XXL (160-196cm)

Total Leatt® protection score of 20 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 , Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | Adjustable flank panels add side impact protection | Our 3D design ensures a great fit that is very comfortable | 53 ventilation slots for maximum cooling | FlipFit front and rear function and BraceOn™ neck brace fitting system allows over and under the shirt fitting with Leatt® neck braces | New and adjustable over-the-shoulder straps ensure a great fit | Weight: - 2.000g | Unisex Fit: 70 to 90 kg | Also available in #XXL (90 – 130kg)

5.5 PRO

4.5 PRO

CHEST PROTECTOR

4.5

CHEST PROTECTOR

BLACK - Part #5017120(***) - (100) ADULT 70 to 90 kg (150 to 198 lbs) | (101) XXL 90 – 130kg (198 to 286 lbs)

BLACK - Part #5014101(***) - (111) ADULT 70 to 90 kg (150 to 198 lbs) | (113) XXL 90 – 130kg (198 to 286 lbs) WHITE - Part #5014101(***) - (112) ADULT 70 to 90 kg (150 to 198 lbs)

BLACK- Part #5015300(***) - (100) ADULT 70 to 90 kg (150 to 198 lbs) | (101) XXL 90 – 130kg (198 to 286 lbs)

LADIES CHEST PROTECTOR

JACKI - Part #5016300100 ADULT 55-95kg

WHITE- Part #5015300(***) - (110) ADULT 70 to 90 kg (150 to 198 lbs) | (111) XXL 90 – 130kg (198 to 286 lbs)

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Total Leatt® protection score of 15 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2, Back EN1621-2 Level 2, Shoulder EN1621-1 | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | Our 3D design ensures a great fit that is very comfortable 45 ventilation slots for maximum cooling | FlipFit front and rear function and BraceOn™ neck brace fitting system allows over and under the shirt fitting with Leatt® neck braces | Under and over the jersey fitting | Weight: 1.700g | Unisex Fit: 70 to 90 kg | Also available in #XXL (90 – 130kg)

4.5 JACKI

CHEST PROTECTOR

Total Leatt® protection score of 17 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 , Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | BraceOn™ neck brace fitting system | Removable front and rear plates allow over / under the shirt Leatt® neck brace fit | Weight: 1.450g | Unisex Fit: 70 to 90 kg | Also available in #XXL (90 – 130kg)

1-5

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Total Leatt® protection score of 12 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 | Flank protection | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | Removable front and rear plates and BraceOn™ neck brace fitting system allow over / under the shirt Leatt® neck brace fit | Weight: 1.450g – 3.2 lbs | Unisex Fit: 70 to 90 kg | Also available in #XXL (90 – 130kg)

Total Leatt® protection score of 12 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 | Flank protection | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Mesh base layer | 3D pre-curved fit specifically designed for women | New smaller back for better fit | Ventilation slots for maximum airflow | Removable front and rear plates and BraceOn™ neck brace fitting system allow over / under the shirt Leatt® neck brace fit | Weight: 1.450g| Lady Fit: Adult (55-95kg)

2.5

2.5 ROX

CHEST PROTECTOR

BLACK - Part #5017120110 ADULT 50 to 80 kg (110 to 176 lbs)

CHEST PROTECTOR

BLACK/BRUSHED - Part #5018100300 ADULT 50 to 80 kg (110 to 176 lbs)

WHITE/RED - Part #5018100100 ADULT 50 to 80 kg (110 to 176 lbs)

BLUE/RED- Part #5018100150 ADULT 50 to 80 kg (110 to 176 lbs)

LIME/TEAL - Part #5018100200 ADULT 50 to 80 kg (110 to 176 lbs)

GREY/TEAL - Part #5018100250 ADULT 50 to 80 kg (110 to 176 lbs)

WHITE - Part #5017120111 ADULT 50 to 80 kg (110 to 176 lbs)

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Protection

Chest

SOFT

PROTECTION

“I CHOOSE LEATT BECAUSE IN ENDURO RACING, CRASHING IS

INEVITABLE,

BUT

BEING

PROTECTED

WHAT

ALLOWS

ME TO KEEP GETTING UP AGAIN.”

NECK BRACE

– TEAL STETSON-LEE, ENDURO ATHLETE.

Our top-of-the-line soft body protection range offers a super lightweight, ventilated and secure strapping system. The perforated, multi-layer, 3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder, energyabsorbing protector upon impact. This combination results in a comfortable fit that conforms to many body shapes and is CE certified to the highest levels on chest and back impact

SOFT & SAFE

protection! 3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder, energy-absorbing protector upon impact. This

3DF VENTILATED MOLDED FOAM

protector conforms to many body shapes and is CE certified to the highest levels on chest and FORCE INTRODUCTION

back impact protection.

FOAM REACTION

MULTI LAYERED TECHNOLOGY NEW 3D MESH PANELS PROVIDING EXCELLENT VENTILATION The original 3DF foam uses a solid single layer structure

The multilayer 3DF Airfit foam uses a sandwich type lay

that results in good impact absorption, but limits the

up which allows relative movement between layers and

amount of bending in the garment.

therefore results in easier bending and better comfort

COMPATIBLE

for the rider while maintaining the same level of impact absorption. 86

3DF AIRFIT

3DF AIRFIT LITE

BODY PROTECTOR

Part #5017180(***) - (030) S/M 160-172cm | (031) L/XL 172-184cm | (032) XXL 184-196cm

Part #5018101(***) - (211) S/M 160-172cm | (212) L/XL 172-184cm | (213) XXL 184-196cm

Protection

1-5

3DF AIRFIT LITE

BODY TEE

Part #5017180(***) - (020) S/M 160-172cm | (021) L/XL 172-184cm | (022) XXL 184-196cm

Protection

1-5

SHOULDER TEE

Part #5018300(***) - (100) S/M 160-172cm | (101) L/XL 172-184cm | (102) XXL 184-196cm

Protection

1-5

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Total Leatt® protection score of 21 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2 , Back EN1621-2 Level 2 , Elbow and Shoulder EN1621-1 | FFM-French Federation Certified | New longer back protector | More comfortable and flexible | Extra upper-chest impact protection layer for non-neck brace users | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion)| Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash | Weight: 1.450g | Unisex fit: S/M-XXL (160-196cm)

3DF AIRFIT LITE

BODY PROTECTOR

Total Leatt® protection score of 18 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Elbow and Shoulder EN1621-1 | FFM-French Federation Certified | New longer back protector | More comfortable and flexible | Extra upper-chest impact protection layer for non-neck brace users | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zipup compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash | Weight: 1.250g | Unisex fit: S/M-XXL (160-196cm)

Total Leatt® protection score of 13 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Shoulder EN1621-1 | FFM-French Federation Certified | New longer back protector | More comfortable and flexible | Extra upper-chest impact protection layer for non-neck brace users | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash. | Weight: 1.100g | Unisex fit: S/M-XXL (160-196cm)

Total Leatt® protection score of 5 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Shoulder EN1621-1 | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear compression sock design for maximum evaporation | Easy to clean: hand wash. | Weight: 320-345g | Unisex fit: S/M-XXL (160-196cm)

3DF AIRFIT

3DF AIRFIT LITE

BODY VEST

Part #5018200(***) - (100) S/M 160-172cm | (101) L/XL 172-184cm | (102) XXL 184-196cm

1-5

3DF AIRFIT

BACK PROTECTOR

Part #5018400(***) - (100) S/M 160-172cm | (102) L/XL 172-184cm

Part #5017180(***) - (010) S/M 160-172cm | (011) L/XL 172-184cm | (012) XXL 184-196cm

Protection

1-5

CHEST PROTECTOR

Part #5017120(***) - (112) ADULT 70 to 90 kg (150 to 198 lbs) (113) XXL 90 – 130kg (198 to 286 lbs)

Protection

1-5

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Total Leatt® protection score of 11 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2, Back EN1621-2 Level 2 | FFM-French Federation Certified | New longer back protector | Lighter, more comfortable and flexible | Extra upper-chest impact protection layer for non-neck brace users | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash | Weight: 1.000g | Unisex fit: S/M-XXL (160-196cm)

3DF AIRFIT

BODY VEST

Total Leatt® protection score of 8 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 1 , Back EN1621-2 Level 1, FFM-French Federation Certified | New longer back protector | More comfortable and flexible | Extra upper-chest impact protection layer for non-neck brace users | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash | Weight: 850g | Unisex Fit: S/M-XXL (160-196cm)

Total Leatt® protection score of 6 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Back EN1621-2 Level 2 | FFM French Federation Certified | New longer back protector | Antiodor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Our 3D design ensures a great fit that is very comfortable | Easy-to-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean: hand wash | Weight: 850g | Unisex Fit: S/M - XXL (160-196cm)

Total Leatt protection score of 9 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1 | Flank protection | FFM-French Federation Certified | Multi-layer, multi-plate articulating design | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | BraceOn™ neck brace fitting system | Recess areas in both front and back integrates with Leatt® neck braces perfectly | Weight: 740g | Unisex Fit: 70 to 90 kg | Also available in #XXL (90 – 130kg)

N RIVE D E ANC H M R ATC FO R M E P N TO O I T RIVE TEC D O R R P YOU

DUAL AXIS

KNEE & SHIN GUARD

EXT

KNEE & SHIN GUARD

BLACK/RED - Part #5017010(***) - (180) S/M | (181) L/XL | (182) XXL

BLACK - Part #5014210(***) - (041) S/M | (042) L/XL

WHITE/BLACK - Part #5017010(***) - (175) S/M | (176) L/XL | (177) XXL

WHITE - Part #5014210(***) - (051) S/M | (052) L/XL

3.0 EXT

3DF 6.0

KNEE & SHIN GUARD

BLACK - Part #5016000(***) - (400) S/M | (401) L/XL | (402) XXL

KNEE GUARD

BLACK - Part #5018400(***) - (470) S/M | (471) L/XL | (472) XXL FUEL/BLACK- Part #5018400(***) - (480) S/M | (481) L/XL | (482) XXL

LIME/BLUE - Part #5017010(***) - (190) S/M | (191) L/XL | (192) XXL

WHITE/BLACK - Part #5018400(***) - (490) S/M | (491) L/XL | (492) XXL Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 20 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee and shin EN16211 | Full shin BMX/DH approved extended length – EXT | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Slim shin plate that also fits inside boots | Weight: 600g (pair) | Please look at our sizing chart for best fit: S/M-XXL

ENDURO

KNEE GUARD

BLACK - Part #5014210(***) - (021) S/M | (022) L/XL WHITE - Part #5014210(***) - (031) S/M | (032) L/XL Protection

Protection Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 25 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee and shin EN1621-1 | Anatomically correct, pivoting design | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Slim shin plate that also fits inside boots | Weight: 850g (pair) | Please look at our sizing chart for best fit: S/M-XXL

Total Leatt® protection score of 21 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee and shin EN1621-1 | Full shin BMX/DH/MX approved extended length – EXT | New anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed and adjustable non-slip cuffs | Soft rubber edges give great protection feel and comfort | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Slim shin plate that also fits inside boots | Weight: 650g (pair) | Please look at our sizing chart for best fit: S/M-L/XL

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 20 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee EN1621-1 | Silicone lamination to keep protector in place | New anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed and adjustable non-slip cuffs | Soft rubber edges give great protection feel and comfort | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Weight: 500g (pair) | Please look at our sizing chart for best fit: S/M-L/XL

Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 20 points | Soft knee guard with co-molded hard shell sliders | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee EN1621-1 | New anti-slip calf band and silicone grip lining | Silicone printed and adjustable non-slip leg straps | New anti-odor MoistureCool and AirMesh wicking fabrics | Pre-curved 3D design for optimal fit | Side impact protection | Weight: 530g (pair) | Please look at our sizing chart for best fit: S/M-XXL

3DF HYBRID EXT

KNEE & SHIN GUARD

3DF HYBRID

3DF 5.0

KNEE GUARD

BLACK/BLUE - Part #5015400(***) - (450) S/M | (451) L/XL | (452) XXL

BLACK/BLUE - Part #5015400(***) - (420) S/M | (421) L/XL | (422) XXL

BLACK - Part #5016100(***) - (400) S/M | (401) L/XL | (402) XXL

BLACK/WHITE- Part #5015400(***) - (460) S/M | (461) L/XL | (462) XXL

BLACK/LIME- Part #5015400(***) - (430) S/M | (431) L/XL | (432) XXL

BLUE/ORANGE- Part #5016100(***) - (420) S/M | (421) L/XL | (422) XXL

BLACK/LIME - Part #5015400(***) - (470) S/M | (471) L/XL | (472) XXL

BLACK/WHITE - Part #5015400(***) - (440) S/M | (441) L/XL | (442) XXL

LIME/BLACK - Part #5016100(***) - (430) S/M | (431) L/XL | (432) XXL

AIRFLEX PRO

KNEE GUARD

Part #5016100(***) - (300) S | (301) M | (302) L | (303) XL |(304) XXL

Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 15 points | Super slim, 3D molded impact protection | CE tested and certified as impact protection: Knee EN1621-1 | New side and upper knee impact protection | New silicone printed, cupped knee grip | New single sizing for perfect fit | Anti-odor MoistureCool and AirMesh wicking fabrics | All protection materials perforated for ventilation | Silicone printed, non-slip cuffs | Pre-curved 3D design for better fit and function | Weight: 300g (pair) | Please look at our sizing chart for best fit: S-XXL

AIRFLEX

KNEE GUARD

Part #5015400(***) - (410) S/M | (411) L/XL | (412) XXL

Protection

1-5

Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

3DF AirFit ventilated soft impact foam with hard shell areas | CE tested and certified as impact protection: Knee and shin EN1621-1 | Total Leatt® protection score of 19 points | Full shin BMX/DH approved extended length – EXT | Hybrid combination: hard shell deflecting and sliding full shin and 3DF impact absorbing knee | New 25% slimmer CE impact certified profile | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed and adjustable non-slip cuffs | Our 3D design ensures a great fit that is very comfortable | Slim shin plate that also fits inside boots | Weight: 700g – 1.5 lbs (pair)

Total Leatt® protection score of 17 points | 3DF AirFit ventilated soft impact foam with hard shell areas | CE tested and certified as impact protection: Knee EN1621-1 | Hybrid combination: Hard shell deflecting and sliding upper shin, 3DF impact absorbing knee | New 25% slimmer CE impact certified profile | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed and adjustable non-slip cuffs | Our 3D design ensures a great fit that is very comfortable | Weight: 550g 1.2lbs (pair) | Please look at our sizing chart for best fit: S/M-XXL

Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 13 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee EN1621-1 | New 25% slimmer CE impact certified profile | New increased side protection | Abrasion resistant Aramid outer layer for durability | New wider, silicone printed elastic cuffs | New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs | Anti-odor MoistureCool and AirMesh wicking fabrics | Pre-curved 3D design for better fit and function | All protection materials perforated for ventilation | Weight: 500g (pair) | Please look at our sizing chart for best fit: S/M-XXL

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 8 points | Super slim, 3D molded impact protection | CE tested and certified as impact protection: Knee EN1621-1 | New silicone printed, cupped knee grip | Anti-odor MoistureCool and AirMesh wicking fabrics | All protection materials perforated for ventilation | Silicone printed, non-slip cuffs | Pre-curved 3D design for better fit and function | Weight: 250g (pair) | Please look at our sizing chart for best fit: S/M-XXL

CONTOUR

3DF HYBRID

ELBOW GUARD

BLACK- Part #5015200(***) - (100) S/M | (101) L/XL | (102) XXL WHITE - Part #5015200(***) - (110) S/M | (111) L/XL | (112) XXL

ELBOW GUARD

3DF 5.0

AIRFLEX

ELBOW GUARD

BLACK/BLUE - Part #5015400(***) - (270) S/M | (271) L/XL | (272) XXL

BLACK - Part #5016100(***) - (100) S | (101) M | (102) L | (103) XL | (104) XXL

BLACK/LIME - Part #5015400(***) - (280) S/M | (281) L/XL | (282) XXL

BLUE/ORANGE - Part #5016100(***) - (150) S | (151) M | (152) L | (153) XL | (154) XXL

BLACK/WHITE - Part #5015400(***) - (290) S/M | (291) L/XL | (292) XXL

LIME/BLACK - Part #5016100(***) - (200) S | (201) M | (202) L | (203) XL | (204) XXL

ELBOW GUARD

Part #5016400(***) - (260) S | (261) M | (262) L | (263) XL | (264) XXL

Protection Protection

1-5

Elbow

Forearm

Deflection

5 Total Leatt® protection score of 11 points | Super slim, 3D molded impact protection | CE tested and certified as impact protection: Elbow EN1621-1 | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone lamination, non-slip cuffs to keep protector in place | Silicone printed, cupped elbow grip | Our 3D design ensures a great fit that is very comfortable | Weight: 240g (pair) | Please look at our sizing chart for best fit: S-XXL

Total Leatt® protection score of 14 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Elbow EN1621-1 | Silicone printed elbow grip | New anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed, non-slip cuffs | Soft rubber edges give great protection feel and comfort | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Weight: 300g (pair) | Please look at our sizing chart for best fit: S/M-XXL

3.0

1-5

Elbow

SHOULDER BRACE

ELBOW GUARD

LEFT/RIGHT

LEFT- Part #5015800(***) - (100) S/M | (101) L/XL | (102) XXL

BLACK - Part #5016000(***) - (500) S/M | (501) L/XL | (502) XXL

RIGHT - Part #5015800(***) - (110) S/M | (111) L/XL | (112) XXL

Protection

1-5

Elbow

Forearm

Deflection

5 Protection

Total Leatt® protection score of 14 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Elbow EN1621-1 | Easy fitting with X-straps | Co-molded soft rubber edges for extra comfort | 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Weight: 300g (pair) | Please look at our sizing chart for best fit: S/M-XXL

1-5

Protection

1-5

Elbow

Forearm

Deflection

Total Leatt® protection score of 13 points | 3DF AirFit ventilated soft impact foam with hard shell areas | CE tested and certified as impact protection: Elbow EN1621-1 | Hybrid combination: hard shell deflecting and sliding arm and 3DF impact absorbing elbow | New 25% slimmer CE impact certified profile | Silicone printed elbow grip | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed, non-slip cuffs | Our 3D design ensures a great fit that is very comfortable | Weight: 300g (pair) | Please look at our sizing chart for best fit: S/M-XXL

Inwards pulling of the shoulder into the shoulder cup | Rearwards pulling of shoulder makes the shoulder stay in the cup during motion | CE tested and certified as impact protection: Shoulder EN1621-1 | Snug, under the jersey fit | Adjustable compression | Great four-way adjustments for perfect pull and cupping | Sizes S/M-XXL

Total Leatt® protection score of 11 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Elbow EN1621-1 | New 25% slimmer CE impact certified profile | Abrasion resistant Aramid outer layer for durability | New wider silicone printed and elastic non-slip cuffs | New single sizing for a perfect fit | Anti-odor MoistureCool and AirMesh wicking fabrics | Pre-curved design for better fit and function | Silicone printed elbow grip | All protection materials perforated for ventilation | Weight: 350g (pair) | Please look at our sizing chart for best fit: S-XXL

GEN

100

T NEX E H T FOR ES ERO H TION ERA

101

GPX 6.5 CARBON

4.5 POLYMER COMPOUND

JUNIOR HELMET

V02 ORANGE/BLACK/GREY (ECE) - Part #1015500(***)

V02 YELLOW/BLACK/GREY (ECE) - Part #1015500(***)

(010) M 51-52cm | (011) L 53-54cm

(020) M 51-52cm | (021) L 53-54cm

JUNIOR HELMET

SATIN/BLACK (ECE) - Part #1017110(***) - (200) M 51-52cm | (201) L 53-54cm

SOLID WHITE (ECE) - Part #1017110(***) - (210) M 51-52cm | (211) L 53-54cm

Carbon shell | 360° Turbine Technology: reduces up to 30% of head impact at concussion level and up to 40% of rotational acceleration to head and brain | Reduced outer shell volume: a 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain | Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-Lex® moisture wicking, breathable, antiodor and washable inner liner | Optimal Neck Brace Compatibility | Maximized ventilation optimized for off-road racing and effective even at very low speeds | Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: ECE 2205 or DOT | Weight: ECE: 950-1270g. DOT: 1195-1270g | Sizing: #M Junior (51-52cm – 20 – 20 ½”) | #L Junior (53-54cm – 20 ¾ - 21 ¼”)

GPX 5.5 COMPOSITE

JUNIOR HELMET

SOLID WHITE (ECE) - Part #1015500(***)

V06 ORANGE/YELLOW (ECE)

V06 WHITE/BLACK (ECE)

(050) M 51-52cm | (051) L 53-54cm

Part #1015500(***) - (060) M 51-52cm | (061) L 53-54cm

Part #1015500(***) - (070) M 51-52cm | (071) L 53-54cm

Carbon shell | 360° Turbine Technology: reduces up to 30% of head impact at concussion level and up to 40% of rotational acceleration to head and brain | Reduced outer shell volume: a 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain | Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner | Optimal Neck Brace Compatibility | Maximized ventilation optimized for off-road racing and effective even at very low speeds | Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: ECE 2205 or DOT | Weight: ECE: 950-1270g. DOT: 1195-1270g | Sizing: #M Junior (51-52cm – 20 – 20 ½”) | #L Junior (53-54cm – 20 ¾ - 21 ¼”)

102

V10 BLU/WHITE (ECE) - Part #1018200(***)

V22 ORANGE/DENIM (ECE) - Part #1018200(***)

V22 LIME/TEAL (ECE) - Part #1018200(***)

(160) M 51-52cm | (161) L 53-54cm

(270) M 51-52cm | (271) L 53-54cm

(170) M 51-52cm | (171) L 53-54cm

Injected Polymer Compound Shell | 360° Turbine Technology: reduces up to 30% of head impact at concussion level and up to 40% of rotational acceleration to head and brain | Reduced outer shell volume: a 10% smaller shell, transfers up to 20% less rotational forces to the neck, head and brain| Multi-density, V-shaped impact foam molded directly to the outer shell significantly reduces G-forces transferred to the head and brain | New Dri-Lex® moisture wicking, breathable, anti-odor and washable inner liner | Optimal Neck Brace Compatibility | Maximized ventilation optimized for off-road racing and effective even at very low speeds | Visor with breakaway function for rotational reduction in a crash | Emergency cheek pad removal | Hydration ready (with optional hands-free kit) | Certified and tested: ECE 2205 or DOT | Weight estimate: ECE from 1150g. DOT 1300g | Sizing: #M Junior (51-52cm – 20 – 20 ½”) | #L Junior (53-54cm – 20 ¾ - 21 ¼”)

103

GPX 3.5

GPX 5.5

JUNIOR NECK BRACE

JNR BLACK - Part #1018100220

JNR WHITE - Part #1018100240

JUNIOR NECK BRACE

BLACK/GREY - Part #1014010020

BLACK/GREEN - Part #1014010021

ORANGE/BLACK- Part #1014010022

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | In-molded PC shell with a polyamide reinforced EPS construction for lowest possible neck forces | CoreFlex split rear removable thoracic strut is more comfortable and designed to work with the bodyâ&#x20AC;&#x2122;s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Optimal helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion | Adjustable Thoracic to ensure optimum fit | Sculptured, split front for improved comfort and fit | Ergonomically positioned open/closure system | Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Air flow ribbed body padding for optimum ventilation | Free, optional clear chest strap included | CE tested and certified as Personal Protective Equipment 89/686/EEC | Weight: Estimated 499g | Please look at our sizing chart for best fit

104

Independently tested and proven to reduce neck forces | Up to 43% reduction of risk for a serious neck injury | Rigid, non-flexible platform made of reinforced polyamide for lowest possible neck forces | CoreFlex split rear folding thoracic strut is more comfortable and designed to work with the bodyâ&#x20AC;&#x2122;s natural movements | Thoracic rear strut is engineered to snap off before applying excessive pressure to the back | Optimal helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion | Three-way adjustability and sliding front and rear SureFit adjusters to ensure optimum fit | Four-angle rear thoracic strut adjustments to fit most body shapes | Sculptured, split front for improved comfort and fit | Low profile pushbutton open/closure system | Easy-to-use emergency release mechanism for injured riders | Engineered collarbone cutout to help keep your helmet and brace away from your most fragile bones | Injected, durable and easy-to-clean foam padding | Air flow ribbed body padding for optimum ventilation | Free, optional, clear chest strap included | CE tested and certified as Personal Protective Equipment 89/686/EEC | Weight: from 700g | Please look at our sizing chart for best fit: Junior

105

GPX 3.5

JUNIOR JERSEY

JUNIOR PANTS

BLUE/WHITE - Part #5018700(***)

LIME/WHITE - Part #5018700(***)

BLUE/WHITE - Part #5018750(***)

LIME/WHITE - Part #5018750(***)

(250) S | (251) M | (252) L | (253) XL

(260) S | (261) M | (262) L | (263) XL

(640) S/US22/EU120/130cm | (641) M/US24/EU130/140cm

(650) S/US22/EU120/130cm | (651) M/US24/EU130/140cm

(642) L/US26/EU140/150cm | (643) XL/US28/EU150/160cm

(652) L/US26/EU140/150cm | (653) XL/US28/EU150/160cm

MoistureCool 3D stretch mesh with air channels | X-Flow mesh side panels for improved breathability | New soft stretch cuff | Overlock stitched seams for comfort | Collar design for use with or without a neck brace | Tailored fit for riding with or without body armor | Size: Junior S-XL (120-160cm / 3ft 11” – 5ft 3”)

106

107

GPX 2.5

JUNIOR JERSEY

JUNIOR PANTS

LIME/TEAL - Part #5018700(***)

ORANGE/DENIM - Part #5018700(***)

LIME/TEAL - Part #5018750(***)

ORANGE/DENIM - Part #5018750(***)

(270) XXS | (271) XS | (272) S | (273) M | (274) L

(280) XXS | (281) XS | (282) S | (283) M | (284) L

(660) XXS/US18/EU100/110cm | (661) XS/US20/EU110/120cm

(670) XXS/US18/EU100/110cm | (671) XS/US20/EU110/120cm

(662) S/US22/EU120/130cm | (663) M/US24/EU130/140cm

(672) S/US22/EU120/130cm | (673) M/US24/EU130/140cm

(664) L/US26/EU140/150cm

(674) L/US26/EU140/150cm

WHITE/BLACK - Part #5018700(***) WHITE/BLACK - Part #5018750(***)

(290) XXS | (291) XS | (292) S | (293) M | (294) L

(680) XXS/US18/EU100/110cm | (681) XS/US20/EU110/120cm (682) S/US22/EU120/130cm | (683) M/US24/EU130/140cm (684) L/US26/EU140/150cm

MoistureCool wicking fabric | Overlock stitched seams for comfort | Stretch fit for riding with or without body armor | Size: Junior/Kids XXS-L (100-150cm / 3ft 3” – 4ft 11”)

108

109

GPX 3.5

GPX 1.5

JUNIOR GLOVE

BLUE/WHITE - Part #6018400(***) - (830) S | (831) M | (832) L

LIME/TEAL - Part #6018400(***) - (850) XXS | (851) XS | (852) S | (853) M

LIME/WHITE - Part #6018400(***) - (840) S | (841) M | (842) L

Features

1-5

Protection

Lightweight

Ventilation

Windblock

Palm

AirGel impact protection knuckles | MicronGrip Palm: super slim with superior handlebar feel, excellent dry and wet grip, very durable with touch screen function | Vented, Lite upper-hand material | CE tested and certified as: Personal Protective Equipment 89/686/EEC, Knuckle Impact protection EN13594:2015 | Pre-curved, snug fit and seamless palm | Stretch fit cuff | Multi-ply, nylon thread stitching | Size: Junior S-L

110

FUSION 2.0

JUNIOR GLOVE

ORANGE/DENIM - Part #6018400(***)

BLACK/WHITE - Part #6018400(***)

(860) XXS | (861) XS | (862) S | (863) M

(870) XXS | (871) XS | (872) S | (873) M

Features

JUNIOR VEST

BLACK - Part #1018010(***) - (001) S/M | (002) L/XL | (003) XXL

ORANGE - Part #1018010(***)

NUMBER PLATE FUSION VEST 2.0 JR - Part #4018010001

(021) S/M | (022) L/XL | (023) XXL

1-5

Protection

Lightweight

Ventilation

Windblock

Palm

MicronGrip Palm: super slim with superior handlebar feel, excellent dry and wet grip, very durable with touch screen function | Pre-curved, snug fit and seamless palm | Vented, Lite upper-hand material | Multi-ply, nylon thread stitching | Size: Junior XXS-M

New lightweight and flexible product design for better fit and comfort | 3DF AirFit ventilated soft impact foam | Number plate clip-in function | CE tested and certified as Personal Protective Equipment 89/686/EEC | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Shoulder EN1621-1, Flank protection | Engineered fracture point on rear thoracic strut designed to snap off in an emergency | Collarbone cut-out helps to protect your most fragile bones| Neck brace structure made of fiberglass reinforced polyamide resin | Easy-to-use, no-tool, sizing adjustments and three-dimensional design for perfect fit | Weight: S/M: 1.35, L/XL: 1.48, L: 1.57 | Kids and Junior Fit: S/M-XXL (105-165cm)

111

5.5 JUNIOR

3DF AIRFIT LITE

BODY PROTECTOR

BLACK - Part #5015400(***) - (650) S/M 134-146cm | (651) L/XL 147-159cm

BODY PROTECTOR

Part #5016100(***) - (720) S/M 134-146cm | (721) L/XL 147-159cm

Protection

1-5

Protection

Chest

Back

Flank

Elbow

Shoulder

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN16213 Level 2, Back EN1621-2 Level 1, Elbow and Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Total Leatt® protection score of 23 points | Multi-layer, multi-plate articulating design | Mesh base layer | Adjustable flank panels add side impact protection | Our 3D design ensures a great fit that is very comfortable | 36 ventilation slots for maximum cooling | New anti-odor MoistureCool and AirMesh wicking fabrics | Recess areas in both front and back with BraceOn™ neck brace fitting system integrates with Leatt® neck braces perfectly | Under and over the jersey fit | Weight: 1.350g – 3 lbs

4.5 JUNIOR

3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 1, Back EN1621-2 Level 1, Elbow and Shoulder EN1621-1 | FFM-French Federation Certified | Total Leatt® protection score of 18 points | Anti-odor MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion) | Extra upper-chest impact protection layer for non-neck brace users | Elastic chest strap to give more secure protector positioning | Our 3D design ensures a great fit that is very comfortable | Easyto-wear, zip-up compression sock design for maximum evaporation | BraceOn™ neck brace fitting system | Easy to clean : Hand wash | Weight: 900g

BODY PROTECTOR

5.5 HD PRO JUNIOR

RED/BLACK - Part #5016100(***) - (700) S/M 134-146cm | (701) L/XL 147-159cm

5.5 PRO JUNIOR

CHEST PROTECTOR

BLACK/WHITE- Part #5014210131

Protection

CHEST PROTECTOR

WHITE/BLACK- Part #5014210132

1-5

Chest

Back

Flank

Elbow

Shoulder

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN16213 Level 2, Back EN1621-2 Level 1, Elbow and Shoulder EN1621-1 | FFM-French Federation Certified | Total Leatt® protection score of 18 points | Multi-layer, multiplate articulating design | Mesh base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | New anti-odor MoistureCool and AirMesh wicking fabrics | Recess areas in both front and back and BraceOn™ neck brace fitting system integrates with Leatt® neck braces perfectly | Under and over the jersey fit| Weight: 1.300g – 2.9 lbs

112

1-5

Chest

Protection Protection

1-5

Chest

Back

3 -

Back

Flank

Elbow

Shoulder

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN16213 Level 2, Back EN1621-2 Level 1, Shoulder EN1621-1| Flank protection | FFM-French Federation Certified | Total Leatt® protection score of 18 points | Multi-layer, multi-plate articulating design | Padded base layer | Adjustable flank panels add side impact protection | Our 3D design ensures a great fit that is very comfortable | 36 ventilation slots for maximum cooling | Recess areas in both front and back and BraceOn™ neck brace fitting system integrates with Leatt® neck braces perfectly | Under and over the jersey fit | Weight: 950g – 2.1 lbs

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN1621-3 Level 2, Back EN1621-2 Level 1, Shoulder EN1621-1 | FFM-French Federation Certified | Total Leatt® protection score of 13 points | Multi-layer, multi-plate articulating design | Padded base layer | Our 3D design ensures a great fit that is very comfortable | 36 ventilation slots for maximum cooling | Recess areas in both front and back and BraceOn™ neck brace fitting system integrates with Leatt® neck braces perfectly | Under and over the jersey fit | Weight: 900g – 2 lbs

113

4.5 PRO JUNIOR

4.5 JUNIOR

CHEST PROTECTOR

BLACK/RED- Part #5017120(***) - (130) S/M 134-146cm (131) L/XL 147-159cm

FIRST LAYER

CHEST PROTECTOR

JUNIOR ROOST TEE

BLACK - Part #5018304200

ORANGE/WHITE- Part #5017120(***) - (114)S/M 134-146cm (120) L/XL 147-159cm

KNEE BRACE C - F R A M E J U N I O R Part #5017010130

BLACK RED- Part #5017120(***) - (115) S/M 134-146cm (121) L/XL 147-159cm

Protection

Chest

Back

Flank

Elbow

Shoulder

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN16213 Level 2, Back EN1621-2 Level 2, Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Total Leatt® protection score of 12 points | Multi-layer, multi-plate articulating design | Padded base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | Recess areas in both front and back and BraceOn neck brace fitting system integrates with Leatt neck braces perfectly | Under and over the jersey fitting | Weight: 850g – 1.9 lbs

2.5 KIDS

CHEST PROTECTOR

ORANGE/BLACK- Part #5017120(***) - (140) S/M 134-146cm (141) L/XL 147-159cm

ORANGE/BLACK- Part #5016100600 - JR 110-134cm

LIME/BLUE- Part #5017120(***) - (142) S/M 134-146cm (143) L/XL 147-159cm

BLACK/RED- Part #5016100601 - JR 110-134cm

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Total Leatt® protection score of 3 points | Hard shell protector | CE tested and certified as roost protection: Chest EN14021 | Our 3D design ensures a great fit that is very comfortable | Padded base layer | Close fitting allows for over or under the jersey use | Liberal venting helps keep rider cool | Recess areas in both front and back and BraceOn™ neck brace fitting system integrates with Leatt® neck braces perfectly | Adjustable waist straps for great fit | Weight: 550g | Junior fits two sizes 134 – 146cm, 147 – 159cm

114

1-5

Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Chest prEN16213 Level 2, Back EN1621-2 Level 2, Shoulder EN1621-1 | Flank protection | FFM-French Federation Certified | Total Leatt® protection score of 17 points | Multi-layer, multi-plate articulating design | Padded base layer | Our 3D design ensures a great fit that is very comfortable | Ventilation slots for maximum airflow | Recess areas in both front and back and BraceOn neck brace fitting system integrates with Leatt neck braces perfectly | Under and over the jersey fitting | Weight: 850g – 1.9 lbs

2.5 JUNIOR

Protection

1-5

Chest

Protection

1-5

Chest

Back

Flank

Elbow

Shoulder

Hard shell protector | CE tested and certified as roost protection: Chest EN14021 | Total Leatt® protection score of 3 points | Our 3D design ensures a great fit that is very comfortable | Padded base layer | Close fitting allows for over or under the jersey use | Liberal venting helps keep rider cool | Recess areas in both front and back integrates with Leatt® neck braces perfectly | Adjustable waist straps for great fit | Ergonomically designed buckles for kids | Weight: 450g – 1 lbs

Stiff, mono-hinge frame with three-point force distribution | Very low-profile inner knee for superior bike feel | Reduction of forces to limit knee injuries: ACL, Meniscus and MCL | Certified as medical device: EU CA014741, USA FDA 10048761 | Hyper extension limitations 10, 15, 20 and 25º for ACL injury reduction | Hyper flexion limitation: fixed hyper flexion stopper for meniscus injury reduction | Engineered lab tested built-in fracture points | The C-Frame chassis breaks before the threshold for injuring: The shin bone (Tibia) and the thigh bone (Femur) | Comfortable, lowprofile shin bone plate with load distribution pad that fits inside all boots | Please look at the product video, fitting video and biomedical white paper | Please look at our sizing chart for best fit

115

EXT JUNIOR

3DF HYBRID JUNIOR

KNEE & SHIN GUARD

BLACK- Part #5014210061 1-5

Protection

Knee cup

Shin

Sides

Handlebar

Deflection

BLACK/WHITE - Part #5015400605

Protection

Total Leatt® protection score of 19 points | 3DF AirFit ventilated soft impact foam with hard shell areas | CE tested and certified as impact protection: Knee and shin EN1621-1 | Full shin BMX/DH approved extended length – EXT | Hybrid combination: Hard shell deflecting and sliding full shin , 3DF impact absorbing knee| New 25% slimmer CE impact certified profile | Anti-odor MoistureCool and AirMesh wicking fabrics| Silicone printed and adjustable non-slip cuffs | Our 3D design ensures a great fit that is very comfortable | Slim shin plate that also fits inside boots | Weight: 650g (pair) | Please look at our sizing chart for best fit

3DF 5.0 KIDS

KNEE GUARD

Part #5016100(***) - (900) BLACK | (901) BLUE/ORANGE | (902) LIME/BLACK

1-5

Protection

Elbow

Forearm

Deflection

Total Leatt® protection score of 14 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Elbow EN1621-1 | Silicone printed elbow grip | New anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed, non-slip cuffs | Soft rubber edges give great protection, feel and comfort| 3D design for optimal fit with specific left and right sides | Vented plates for maximum airflow | Weight: 300g (pair) | Please look at our sizing chart for best fit

Total Leatt® protection score of 13 points | 3DF AirFit ventilated soft impact foam with hard shell areas | CE tested and certified as impact protection: Elbow EN1621-1 | Hybrid combination: hard shell deflecting and sliding arm with 3DF impact absorbing elbow | New 25% slimmer CE impact certified profile | Silicone printed elbow grip | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed, non-slip cuffs | Our 3D design ensures a great fit that is very comfortable | Weight: 300g (pair) | Please look at our sizing chart for best fit

3DF 5.0 JUNIOR

3DF 5.0 KIDS

ELBOW GUARD

Part #5016100(***) - (800) BLACK | (801) BLUE/ORANGE | (802) LIME/BLACK

Protection

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 13 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee EN1621-1 | New 25% slimmer CE impact certified profile | New increased side protection | Abrasion resistant Aramid outer layer for durability | New wider, silicone printed elastic cuffs | New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs | Anti-odor MoistureCool and AirMesh wicking fabrics | Pre-curved 3D design for better fit and function | All protection materials perforated for ventilation | Weight: 450g (pair) | Please look at our sizing chart for best fit

116

1-5

Elbow

KNEE GUARD

BLACK - Part #5017120145

Protection

ELBOW GUARD

1-5

Knee cup

Total Leatt® protection score of 21 points | Hard shell and 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee and shin EN1621-1 | Full shin BMX/DH/MX approved extended length – EXT | New anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed and adjustable non-slip cuffs | Soft rubber edges give great protection feel and comfort | 3D design for optimal fit with specific left and right sides Vented plates for maximum airflow | Slim shin plate that also fits inside boots | Weight: 650g (pair) | Please look at our sizing chart for best fit

3DF HYBRID JUNIOR

ELBOW GUARD

BLACK- Part #5015400600

BLACK/WHITE - Part #5015400660 Protection

3DF 5.0 JUNIOR

CONTOUR JUNIOR

KNEE & SHIN GUARD

ELBOW GUARD

BLACK/WHITE - Part #5017120144

1-5

Knee cup

Shin

Sides

Handlebar

Deflection

Total Leatt® protection score of 11 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Knee EN16211 | Abrasion resistant Aramid outer layer for durability | Silicone printed and elastic non-slip cuffs | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed elbow grip | All protection materials perforated for ventilation | Weight: 400g (pair) | Please look at our sizing chart for best fit: Kids (smaller than Junior)

Protection

1-5

Elbow

Forearm

Deflection

1-5

Elbow

Forearm

Deflection

Total Leatt® protection score of 11 points | 3DF AirFit ventilated soft impact foam | CE tested and certified as impact protection: Elbow EN1621-1 | Abrasion resistant Aramid outer layer for durability | Silicone printed and elastic non-slip cuffs | Anti-odor MoistureCool and AirMesh wicking fabrics | Silicone printed elbow grip | All protection materials perforated for ventilation | Weight: Elbow 300g (pair) | Please look at our sizing chart for best fit: Kids (smaller than Junior)

117

FOR P U D LOA RE NTU E V AD

118

119

PROTECT, VENTILATE

HYDRATE

LEATT

CLEANTECH BLADDERS

1 AIRLINE

NECK BRACE

REMOVABLE BACK PROTECTOR

FORCE INTRODUCTION

TURN IT INSIDE OUT

FOAM REACTION

3DF AirFit impact foam offers a soft and flexible fit, yet instantly transforms into a harder, energy-absorbing protector upon impact. This protector conforms to many body shapes and is CE certified to the highest levels on chest and back impact protection.

THE

HEAT

HYDRATION VENTILATION The multilayer 3DF Airﬁt foam uses a sandwich type layup which allows relative movement between layers and therefore results in easier bending and better

COMPATIBLE

BATTLE,

PACKS’

HYDRATION

DESIGN

AND

IMPORTANT.

INNOVATION

SPEAK

OUR FOR

THEMSELVES. SPECIFICALLY DESIGNED WITH MOTOR SPORTS IN MIND, THEY FEATURE OUR OWN UNIQUE FLAT CLEANTECH BLADDERS, AS WELL AS A NUMBER OF SAFETY FEATURES.

comfort for the rider while maintaining the same level of impact absorption.

120

121

GPX XL 2.0

HYDRATION

DARK/BRUSHED - Part #7018100100

CHEST PROTECTOR

GPX 4.5 HYDRA

GPX CARGO 3.0

HYDRATION

BLACK/WHITE - Part #5018100151

BLACK/WHITE- Part #7017100131

BLUE/WHITE - Part #7018100101

122

123

RACE HF 2.0

HYDRATION

ORANGE/BLACK - Part #7016100100

TRAIL WP 2.0

HYDRATION

BLACK/WHITE - Part #7016100140

HYDRATION

TOOL BELT CORE 2.0

BLACK/WHITE - Part #7018100110

ACCESSORIES

HYDRATION

CLEANTECH BLADDERS:

RED/BLACK - Part #7016100120

3L (100oz) - Part #7014210120 2L (70oz) HORIZONTAL - Part #7018210120 2L (70oz) - Part #7016100200 0.75L (25oz) - Part #7016100220

HYDRATION GPX

ULTRA 750 HF

BLACK/WHITE - Part #7016100160

2.0L Hydration and 1.0L Cargo | Hands-free hydration system included | Unique chest harness for a rock solid fit | Ultra-lightweight and durable outer shell | Dual hydration tube exit for two-way routing – over the shoulder or under the arm | Mesh storage pocket inside the bag as well as removable tool sheet | Optimal AirLine back ventilation | Heat reflective inner back panel to keep liquid cool or hot | Height adjustable harness for optimal load positioning on the back and can be positioned on left or right harness strap | Safety whistle included | Reflective safety piping | New hose clip (can be positioned on left and right) and action camera loops | Size: XS-XXL

124

2.0L Hydration and 5L Cargo | Fully-welded, waterproof light outer shell | Unique chest harness for a rock solid fit | Storage pockets including a mobile phone pouch with touch screen functionality | Dual hydration tube exit for twoway routing – over the shoulder or under arm | Removable tool roll | Heat reflective inner back panel to keep liquid cool or hot | Stretch mesh hydration pocket | Safety whistle included | Optimal AirLine back ventilation | Cargo and compression straps | Height adjustable harness for optimal load positioning on the back and can be positioned on left or right harness strap | Reflective safety details | New hose clip (can be positioned on left and right) and action camera loops | Size: XS-XXL

HANDS-FREE KIT Part #0700034040

BITE VALVE

BITE VALVE STRAIGHT

Part #0700034056

Part #0700034050

750ml Hydration | Hands-free drinking system included | Lightweight, durable outer shell | Heat reflective inner back panel to keep liquid cool or hot | Tunnels for left and right routing of the hydration tube | Race inspired graphics with custom area for personalization | Military strength gate lock | Fits all Leatt® neck braces from 2005 onwards (excluding twin thoracic STX and SNX) | Size: One size

125

CAS UAL

T-SHIRT

Part #5017700(***) LOGO RED - (150) S | (151) M | (152) L | (153) XL | (154) XXL LOGO BLACK - (140) S | (141) M | (142) L | (143) XL | (144) XXL

126

Part #5017700(***)

TAB WHITE - (120) S | (121) M | (122) L | (123) XL | (124) XXL

MOUNTAIN BLACK - (160) S | (161) M | (162) L | (163) XL | (164) XXL

AFRICA WHITE - (190) S | (191) M | (192) L | (193) XL | (194) XXL

TAB CHARCOAL - (130) S | (131) M | (132) L | (133) XL | (134) XXL

MOUNTAIN BLUE - (170) S | (171) M | (172) L | (173) XL | (174) XXL

AFRICA CHARCOAL - (180) S | (181) M | (182) L | (183) XL | (184) XXL

127

CAS UAL

HOODY

Part #5017900(***) LOGO BLACK - (800) S | (801) M | (802) L | (803) XL | (804) XXL

CASUAL

CAPS

Part #5017700(***) TRUCKER BLACK - (100) SNAPBACK PETROL - (101) CAMPER BLACK/GREY - (102)

CASUAL

BEANIES

BAGS

ROLLER GEAR BAG

ROLLER GEAR BAG LEATT 8840 145L - 7018210130

Part #5017700(***) BEANIE CAMO BLACK/GREY - (110) BEANIE LOGO BLACK - (111)

BAGS

HELMET BAG

HELMET BAG - Part #7015300001

BAGS

DUFFEL BAG

DUFFEL BAG LEATT 7400 120L - 7018210140

Padded base | Extended spine runners for extra strength when loaded | Dedicated helmet and boot compartments | Name plate holder | Detachable shoulder strap

128

129

SIZING CHARTS A DUL T

G L OVE S

S I Z E TOPS SIZE

XXL

3XL

UNIT

INCH

ARM

74 - 76

30 - 30.5

76 - 78

30.5 - 31

78 - 80

31 - 31.5

80 - 82

31.5 - 32

82 - 84

32 - 33

84 - 86

33 - 34

86 - 88

34 - 35

CHEST

91 - 96

36 - 38

96 - 102

38 - 40

102 - 106

40 - 42

106 - 112

42 - 44

112 - 116

44 - 46

116 - 122

46 - 48

122 - 127

48 - 50

DBX / GP X GLOVE

S I Z E B OTTOMS SIZE

XS / EU46 / US28

S / EU 48 / US30

L / EU 52 / US34

XL / EU 54 / US 36

XXL / EU 56 / US 38

3XL / EU 58 / US 40

4XL / EU 60 / US 42

UNIT

INCH

WAIST

68 - 73

27 - 29

73 - 78

29 - 31

78 - 83

31 - 33

83 - 88

33 - 35

88 - 93

35 - 37

93 - 99

37 - 39

99 - 104

39 - 41

104 - 109

41 - 43

109 - 115

43 - 45

INSEAM

JUNIOR / KIDS

XXL

eu10/US11

eu11/US12

18-19 cm 7” - 7.5”

19-20 cm 7.5” - 8”

20-21.5 cm 8.5” - 9”

21.5-23 cm 9.5” - 10”

23-24 cm 10.5” - 11”

24+ cm 11.5” - 12”

eu1/US2

eu2/US3

13.5-14.5 cm

14.5-15.5 cm

4.5“-5.0“

5.0“-5.5“

Palm circumference

eu3/US4

eu4/US5

15.0-16 cm 5.5“-6“

16-17 cm 6“-6.5“

17-18 cm 6.5“-7“

Head circumference

Jr M

Jr L

51 - 52 cm

53 - 54 cm 203/4”-211/4”

53 - 54 cm

55 - 56 cm 215/8” - 22”

203/4”-211/4”

57 - 58 cm 59 - 60 cm 221/2” - 223/4” 231/4” - 235/8”

XXL

61 - 62cm 24” - 241/2”

63 - 64 cm 243/4” - 251/5”

Chest circumference

XXS / US18 / EU100 / 110cm

XS / US20 / EU110 / 120cm

S / US22 / EU120 / 130cm

M / US24 / EU130 / 140cm

L / US26 / EU140 / 150cm

XL / US28 / EU150 / 160cm

INCH

ARM

CHEST

66 - 69

26-27

69 - 74

27-29

74 - 78

29-30

78 - 81

30-32

81 - 89

32-34

89 - 92

34-36

Waist circumference

F U S I ON

FUSION 2. 0

S I Z E B OTTOMS

Inseam length

XXS / US18 / EU100 / 110cm

XS / US20 / EU110 / 120cm

S / US22 / EU120 / 130cm

M / US24 / EU130 / 140cm

L / US26 / EU140 / 150cm

S/M

L/XL

XXL

54 - 66 cm

66 - 74 cm 25.5” - 29.5”

74 - 86 cm 29.5” - 34”

21” - 25.5”

S/M FUSION 3. 0

86 - 98 cm 34” - 38.5”

L/XL

XXL

98 - 118 cm 118 - 126 cm 38.5” - 46.5” 46.5” - 49.5”

Chest circumference

XL / US28 / EU150 / 160cm

UNIT

INCH

WAIST

68 - 73

27 - 29

73 - 78

29 - 31

78 - 83

31 - 33

83 - 88

33 - 35

88 - 93

35 - 37

93 - 99

37 - 39

INSEAM

130

eu9/US10

20”-201/2”

UNIT

SIZE

eu8/US9

HELMET

Arm length

S I Z E TOPS SIZE

5XL / EU 62 / US 44

eu7/US8

XXS

DBX / GP X JNR GLOV E M / EU 50 / US 32

eu6/US7

131

SIZING CHARTS

KNEE GUARDS

N E C K B R ACES

3.5 NECK BRACE

S/M

L/XL

74 - 82 cm 29.5” - 32.5”

82 - 94 cm 32.5” - 37”

94 - 110 cm 37” - 43”

Dual Axis / Enduro / Knee & Shin / Junior / Airlfex /3DF Hybrid / 5.0 / 3DF / 3. 0 /6.0 KNEE GUAR D

KIDS

Chest circumference

S/M

L/XL

XXL

28 - 34 cm 11” - 13.4”

33 - 41 cm 13” - 16”

41 - 53cm 16” - 21”

53 - 58cm 21” - 23”

18 - 22 cm 7” - 8.6”

20 - 26 cm 7.8” - 10”

25 - 33 cm 9” - 13”

33 - 44cm 13” - 17”

44 - 51cm 17” - 20”

XXL

Airlfex Pr o KNEE GUAR D

26 - 32 cm 10.2” - 12.5”

33 - 37 cm 13” - 14.6” 25 - 29cm 9.8” - 11.4”

37 - 41 cm 14.6” - 16” 29 - 33cm 11.4” - 13”

41 - 47cm 16” - 18.5” 33 - 38cm 13” - 15”

5”/13cm

Upper and lower leg circumference

0 5”/13cm

47 - 53cm 53 - 59cm 18.5” - 20.8” 20.8” - 23.2” 38 - 44cm 44 - 51cm 15” - 17” 17” - 20”

ELBOW GUARDS KN E E B R A CE S JNR C FRAME

X - FRAME

41 - 47cm 16” - 18.5”

S/M

L/XL

XXL

45 - 50cm

50 - 58cm 19.5” - 23”

58 - 64cm 23” - 25”

17.5” - 19.5”

10.2 - 10.8

10.8 - 11.4

11.4 - 12

12 - 13.1

4” - 4.25”

4.25” - 4.5 ”

4.5” - 4.75”

4.75” - 5”

Upper leg circumference

Contour / 3.0 / 3DF Hybrid / 3DF ELBOW GUARD

KIDS

S/M

L/XL

XXL

18 - 20 cm 7” - 8”

19 - 23 cm 7.4” - 9”

22 - 28 cm 8.5” - 11”

28 - 35 cm 11” - 13.7”

35 - 41 cm 13.7” - 16”

Upper arm circumference

XXL

19 - 21 cm

20 - 24 cm 7.8” - 8.9”

24 - 28 cm 8.9” - 11”

28 - 32 cm 11” - 12.5”

32 - 36 cm 12.5” - 14”

36 - 40 cm 14” - 15.7”

7” - 8.6”

KNEE WIDTH cm inches

S H OU L D E R B R A CE Knee width

SHOULDER BRACE

KNEE CIRCUMFERENCE cm inches

32 - 34

34 - 36

36 - 38

38 - 41.5

12.5” - 13”

13” - 14”

14” - 15”

15” - 16”

S/M 76-101cm 30”-40”

L/XL

XXL

101-115 cm 115 - 132 cm 45” - 52” 40” - 45”

Chest circumference

Knee circumference

FOR ANY OTHER SIZING INFORMATION PLEASE CHECK LEATT.COM OR MAIL US AT INFO@LEATT.COM

132

133

PAGE 8

Part #5018700(210-214) PAGE 12

PAGE 8

PAGE 13

PAGE 9

PAGE 13

PAGE 9

PAGE 14

PAGE 10

PAGE 14

Part #5018750(530-535) PAGE 15

PAGE 11

PANTS GPX 5.5 I.K.S

PANTS GPX 4.5

PAGE 16

Part #5018750(590-595) PAGE 17

PAGE 15

PAGE 16

PAGE 12

Part#1018100(130-135) Part#1018100(100-105) PAGE 44

Part#1017110(450-455) Part#1017110(060-061) PAGE 44

Part#1017110(490-495) Part#1017110(100-105) PAGE 45

Part#1015500(260-265) Part#1017110(400-405) PAGE 45

Part #1018200(190-195) #1018200(110-115) PAGE 49

Part #1018200(230-235) #1018200(150-155) PAGE 50

Part #1017110(550-555) #1017110(110-115) PAGE 50

Part #1017110(560-565) #1017110(120-125) PAGE 51 50

Part#1015500(090-095) Part#1017110(420-425) PAGE 46

PAGE 54

Part#1015500(080-085) Part#1017110(410-415) PAGE 46

Part#1018200(210-215) Part#1018200(130-135) PAGE 47

PAGE 54

PAGE 55

Part #1018200(200-205) #1018200(120-125) PAGE 48

PAGE 55

Part #1018200(220-225) #1018200(140-145) PAGE 48

PAGE 62

Part #1018200(180-185) #1018200(100-105) PAGE 49

PAGE 62

Part #1017010(190-191)

PANTS GPX 4.5

PAGE 17

PAGE 18

Part #5018750(610-615) PAGE 18

PAGE 19

PAGE 20

PAGE 21

PAGE 26

PAGE 27

Part #6018400(780-784) PAGE 28

PAGE 30

Part #6018400(660-664) PAGE 30

PAGE 30

Part #6018400(700-704) PAGE 30

PAGE 31

GLOVE GPX 1.5 GRIPR

PAGE 33

GLOVE GPX 1.5 GRIPR

PAGE 32

PAGE 33

134

GLOVE GPX 1.5 GRIPR PAGE 33

Part #5017810(360-365) PAGE 20

PAGE 65

PAGE 66

NECK BRACE SNX TROPHY BLACK/ORANGE Part #1014040(010-012) PAGE 67

PAGE 74

PAGE 75

PAGE 80

PAGE 81

PAGE 82

PAGE 83

PAGE 84

PAGE 85

PAGE 88

PAGE 89

NECK BRACE GPX 6.5 CARBON BLACK

PANTS GPX 5.5 ENDURO

NECK BRACE

PAGE 21

PAGE 63

PAGE 64

PAGE 29

PAGE 73

GLOVE GPX 1.5 GRIPR

GLOVE GPX 1.5 GRIPR PAGE 32

NECK BRACE

NECK BRACE SNX 5.5 BLACK/ORANGE Part #1017010(190-191) PAGE 67

PAGE 71

PANTS PAGE 28

PAGE 31

PAGE 32

PAGE 40

PAGE 41 40

Part#1018100(140-145) Part#1018100(110-115) PAGE 42

Part#1018100(150-155) Part#1018100(120-125) PAGE 43

135

BODY VEST 3DF AIRFIT LITE

CHEST PROTECTOR 3DF AIRFIT BLACK/RED PAGE 94

PAGE 94

PAGE 95

Part #5018750(670-674) PAGE 109

Part #5018750(680-684) PAGE 109

PAGE 110

Part #6018400(870-873) PAGE 110

PAGE 111

PAGE 112

PAGE 96

PAGE 112

PAGE 113

PAGE 114

PAGE 97

PAGE 98

PAGE 114

PAGE 115

PAGE 116

JUNIOR BLACK Part #5016100900 PAGE 116

PAGE 116

PAGE 117

PAGE 99

V02 YELLOW/BLK/GREY Part #1015500(020-021) PAGE 102

V02 ORANGE/BLK/GREY Part #1015500(010-011) PAGE 102

Part #1015500(520-521) PAGE 102

PAGE 117

PAGE 122

PAGE 123

PAGE 124

Part # 1018200(240-241) PAGE 103

Part # 1018200(260-261) PAGE 103

Part # 1018200(250-251) PAGE 103

PAGE 104

PAGE 105

PAGE 124

PAGE 125

PAGE 126

PAGE 127

PAGE 107

Part #5018750(650-653) PAGE 107

PAGE 108

Part #5018700(290-294) PAGE 108

Part #5018750(660-664) PAGE 109

PAGE 127

PAGE 128

PAGE 129

PAGE 90

PAGE 91

PAGE 94

PAGE 95

PAGE 96

PAGE 97

PAGE 98

PAGE 99

V06 ORANGE/YELLOW Part #1017110(530-531) PAGE 102

V06 WHITE/BLACK Part #1017110(540-541) PAGE 102

Part # 1017110(640-641) PAGE 103

PAGE 105

PAGE 106

EXT

136

Part # 1017110(650-651) PAGE 103

Part #5018700(260-263) PAGE 106

PAGE 94

EXT

Part #5018700(280-284) PAGE 108

137

Head Office No 12, Kiepersol Crescent, Atlas Gardens, Contermanskloof, Durbanville, 7550, Cape Town, South Africa Tel: +27 21 557 7257 Fax: +27 21 557 7381 Email: info@leatt.com USA 26475 Summit Circle, Santa Clarita, California, 91350 Tel: 661 287 9258 Fax: 661 287 9688 Questions: info@leatt.com Sponsorships: ridersupport@leatt.com Warranty: info@leatt.com Dealer Enquiries (US): info@leatt.com Europe Email: leatt-eu-contact@leatt.com

LEATT.COM

LEATT POWERSPORTS CATALOGUE 2018

Toll Free: 1.800.691.3314