Find The Symptoms Of Overfilled Oil In Your MercedesBenz by Bridgewater Mechanic Apart from filling the fuel tank of the car, you have to change the engine oil to keep the engine running smoothly. In the preventive service and maintenance of Mercedes-Benz, you have to perform an oil change at a regular interval. So, pour clean and good quality oil into the engine for enhancing its longevity. All we know is that oil is the lifeblood of the engine, but pouring too much oil into the engine can cause costly damages. Due to these reasons, make sure that your engine has the right amount of engine oil to keep it functioning efficiently. Accidentally, if the engine contains a large amount of oil then remove it as soon as possible.
Causes behind excess oil in the engine The main causes behind excess oil in the engine are overfilling the oil crankcase by a mechanic while topping off or an oil change. On the other hand, draining the old engine inadequately during an oil change or adding too much oil in the oil filter also causes excess oil in the engine of Mercedes-Benz. Apart from the above causes, the combination of fluids in the engine will define excess oil in the engine. As a result, condensation is buildup inside the engine and allows the coolant to leak from the faulty seal or head gasket. Leaving it for longer will dilute extra oil in the engine and cause major engine damage.
Symptoms of overfilled oil in the engine In general, the oil can lubricate several moving parts of the engine. Like too little oil, too much oil will also cause problems in the engine. The following symptoms you will notice due to too much or overfilled oil in the engine of Mercedes-Benz.
Failed catalytic converter The main purpose of the catalytic converter is to filter all the contaminants from the exhaust to protect the environment from pollution. When the converter is clogged, it will burn excess oil in this process and illuminate the check engine light on the dashboard. As a result, the cars run poorly and lead to costly repairs.
Frothy oil When you pour oil into the engine, it travels down the fill tube and into the reservoir called the oil pan. If you are pouring too much oil into the engine, then the oil pan is overflowed and allows the oil to reach several engine-moving components. When the oil contacts the crankshaft, it can shakeup. As a result, the oil loses its lubricity.
Worn spark plugs Thus, the spark plug of the car is worn out due to excess fuel or oil in the engine or the oil unable to get burned by the combustion of the engine. As a result, the worn spark plugs will cause oil to leak over a long period of time. So, try to fix it as soon as possible for preventing other damages like reduced fuel mileage, engine misfiring, and the car don’t start.
Too much pressure Commonly, the engine and its moving parts are sealed so that the water does not get interfere with engine balancing. As a result, the pressure of the engine is increased in the car. Moreover, the increased oil level also increases the overall pressure of the engine. If not addressed, then it will cause major engine damage.
Oil leaking When the pressure of the engine is increased, it will cause oil leaks. Thus, the engine is made up of several components which are sealed with bolts and gaskets. Due to the increased engine pressure, the gaskets reach beyond their limit and leak oil slowly. As a result, you will find oil leaks or large puddles of oil on your garage floor. So, try to fill the engine with the right amount of oil.
What do you have to do when the car is overfilled? When the engine of your Mercedes-Benz is overfilled, you have to drain the excess amount of oil in the reservoir before driving it again. By using the right tools, you can drain out the oil from the car. For preventing the overfilling of oil in the engine, you have to check the dipstick before leaving the car to a mechanic in the oil change. If the oil level on the dipstick is above the recommended fill level, then ensure that the engine is overfilled. Driving the car in this condition could cause major engine breakdowns.
Way to remove excess oil from the engine You have to follow a safer and more precise method for removing excess oil from the dipstick or crankcase cap. In this way, you have to drain the oil from the engine completely by removing the oil drain plug at the bottom of the oil pan and replacing the oil filter. Once the oil is drained, refill the engine with the right amount of oil by following the recommendation of the owner's manual. After completion of the process, you have to dispose of the oil by collecting it in a drain container. If you don't want to take any risks, then towed it to a reputed auto repair shop for removing the excess oil.
Conclusion If your engine is overfilled, then fix the issues by draining the excess oil from the drain plug. People living in Bridgewater can bring their Mercedes-Benz to the nearest professional mechanic for proper diagnosis and drain the overfilled oil efficiently.