INSTRUCTIONS
MTHB zero wobble bolt
DO NOT PUT A WASHER ON THE HEAD END OF BOLT or the carrier will wobble (not pretty). Attach the MotoTote carrier to the vehicle hitch receiver with the Zero-Wobble hitch bolt, washer and nut as shown. Tighten until the connection to the hitch is solid with no play. Do not over-tighten. If installed correctly, the bolt head will be recessed into the hitch pin hole as shown with no movement at the hitch.
FOR MORE INFO GO TO
MotoTote.com/hitch
If you need assistance please contact us at support@mototote.com or call 888-333-4621 Copyright 2018 MotoTote LLC. All rights reserved MotoTote is a registered trademark of MotoTote LLC REV 08-08-18