World_06_Lighting by pete roberts

m o t r a x . c o. u k

6 LIGHTING LED ‘D’ Lights

1 2

Removing the original indicators from a bike often leaves large awkwardly shaped holes in the fairing. These LED D lights have been designed to fit neatly into this opening giving you flush mounted LED indicators with a professional fitment and finish. Simple to fit, with excellent results. Dimensions: Honda: 50mm L, 29mm W, 20mm H Kawasaki: 50mm L, 35mm W, 20mm H Suzuki: 48mm L, 32mm W, 19mm H Yamaha: 40mm L, 25mm W, 20mm H W T E C H

CODE LFH1 LFK1 LFY1 LFS1

DESCRIPTION LED ‘D’ Lights - Honda LED ‘D’ Lights - Kawasaki LED ‘D’ Lights - Yamaha LED ‘D’ Lights - Suzuki

FLASHING TOO FAST? See page 50

Typical headset configuration H

L FLASHING TOO FAST?

LEDFire indicators Using ultra-bright LED technology, these Universal LEDFire indicators offer style, improved indicator performance and all direction flash. Wrapped in a quality aluminium and Perspex housing, available with a clear, black or chrome anodised housing for improved protection from the elements. Each indicator comes complete with universal wiring. Dimensions: 60mm L, 20mm W, 40mm H, 23mm Stalk, 8mm bolt fixing

4 CODE LF1 LF2 LF3

5 6 46

DESCRIPTION LEDFire - Clear (Pair) LEDFire - Black (Pair) LEDFire - Chrome (Pair)

See page 50

Stem

W T E C H

LEDTip indicators These universal indicators offer improved styling and performance over original fitted equipment. Packed with high intensity LED’s the LEDTips flash in 2 directions so that you can now be seen from the front/ behind and also from the side. Available in black or carbon fibre effect. Improve your safety and style in one go! Dimensions: 50mm L, 30mm W, 27mm H, 40mm/20mm Stalk, 10mm bolt fixing

CODE LAT1 LAT2 LAT3 LAT4

ING FLASH ST? A F O TO e 50 See pag

Stem W

DESCRIPTION LEDTip - Short stem, Black LEDTip - Long stem, Black LEDTip - Short stem, Carbon LEDTip - Long stem, Carbon

T E C H

7 8

LEDArrow indicators T E C H

Ditch the bog-standards and make your bike a sharp statement of the ultimate in sophistication with LED Arrows. Don’t be a target, point out your space on the road – no-one is going to miss you fly past with these! Available in black, chrome and carbon fibre effect. Stem Dimensions: 50mm L, 30mm W, 35mm H, 40mm/20mm Stalk, 10mm bolt fixing

CODE LA1 LA2 LA3 LA4 LA5

FLASH TOO F ING AST? See pag e 50

DESCRIPTION LEDArrow - Short stem, Black LEDArrow - Long stem, Black LEDArrow - Short stem, Carbon LEDArrow - Long stem, Carbon LEDArrow - Short stem, Chrome

m o t r a x . c o. u k

LIGHTING 6

ING FLASH ST? A F O O T e 50 See pag

T E C H

LEDAllyCators indicators LEDAllyCators give you the perfect form of miniature aluminium indicators, with the latest LED technology for unrivalled, ultra-bright performance. Fully ‘E’ marked they give you uncompromising style and function. Dimensions: 50mm L, 22mm W, 21mm H, 17mm Stalk, 8mm bolt fixing Note: Available in chrome only.

Stem

Stem H H L L

CODE AWL1 AWL2 AWL5 BU21 BU10

CODE DESCRIPTION AWL6 LEDAllyCators - Chrome

AllyCators indicators

DESCRIPTION AllyCators - Clear/amber lens (pair) AllyCators - Black/amber lens (pair) AllyCators - Chrome/amber lens (pair) Bulbs - 12v 23w - pair Bulbs - 12v 10w - pair

Conventional bulb-version of the popular Allycators, dimensions are as LED version, simple to fit. Featuring robust aluminium body - available in clear or black with amber lenses.

Stem

TinyCators indicators Tiny, yet perfectly formed from aluminium, TinyCators are just like indicators, only smaller. As bright as your standard units, but considerably more stylish; remember, gorgeous things come in small packages! Universal fitment, complete with bulbs and wiring. Available in clear, black and chrome. Dimensions: 46mm L, 20mm W, 20mm H, 23mm Stalk, 8mm bolt fixing

CODE TC1 TC2

DESCRIPTION Tinycators (pair) - Clear Tinycators (pair)- Black

H L

CODE DESCRIPTION TC5 Tinycators (pair) - Chrome TCBULB Bulb - 12v x 6w - each

T E C H

ING FLASH ST? A TOO F e 50 See pag

Stem T E C H

FLASH TOO F ING AST? See pag e 50

LEDTinyCators indicators

CODE DESCRIPTION TC3 LEDTinycators - Clear TC4 LEDTinycators - Black

Taking our Tinycators to another level, these LEDTinycators give you the perfect form of miniature aluminium indicators, with the latest LED technology for unrivalled, ultra-bright performance. Fully ‘E’ marked they give you uncompromising style and function. Available in clear, black and chrome. Dimensions: 50mm L, 22mm W, 21mm H, 17mm Stalk, 8mm bolt fixing

LED Micro fairing indicators Uinversal LED Micro Fairing Mount indicators are an ideal way to replace the large indicators which are standard on the majority of today’s bikes. Using the latest high intensity LEDs they offer modern styling, superior performance and a longer life. They complete with 3M adhesive pads on the rear for easy installation. Dimensions: 64mm L, 32mm W, 20mm H

CODE DESCRIPTION FM6 LED Micro fairing

m o t r a x . c o. u k

06 LIGHTING Stem

MicroArrow indicators

Universal Micro Arrow indicators are an ideal way to replace the large indicators which are standard on the majority of today’s bikes. Available in Black, or Carbon Look with either a clear or amber lens, the Micro Arrow indicators will compliment any bike. Universal fitment complete with bulbs and wiring. Dimensions: 55mm L, 31mm W, 46mm H, 8mm Stalk, 9mm bolt fixing

CODE AIN1 AIN2 AIN3 AIN4 AIN9

DESCRIPTION MicroArrow - Black/Amber lens - short stem MicroArrow - Black/Amber lens - long stem MicroArrow - Black/Clear lens - short stem MicroArrow - Black/Clear lens - long stem MicroArrow - Black/Iridium lens - short stem

CODE AIN10 AIN5 AIN6 AIN7 AIN8

DESCRIPTION MicroArrow - Black/Iridium lens - short stem MicroArrow - Carbon/Amber lens - short stem MicroArrow - Carbon/Amber lens - long stem MicroArrow - Carbon/Clear lens - short stem MicroArrow - Carbon/Clear lens - long stem

CODE AIN11 AIN12 BU21 BU10

DESCRIPTION MicroArrow - Carbon/Iridium lens - short stem MicroArrow - Carbon/Iridium lens - long stem Bulbs - 12v x 23w - pair Bulbs - 12v x 10w - pair

Stem

T E C H

ALSO AVAILABLE Stem

W H

MicroOval indicators

4 5

DinkyWinkaz indicators Universal Dinkywinkaz indicators are the dinkiest winkers yet..! Ideal replacement for standard equipment on the majority of bikes. Available in Black or Carbon Look with a choice of Amber, Clear or Iridium lenses. Universal fitment complete with bulbs and wiring. Dimensions: 55mm L, 23mm W, 41mm H, 22mm Stem, 9mm bolt fixing

CODE DW1 DW2 DW3 DW5 BU21 BU10

DESCRIPTION DinkyWinkaz - Black/Amber lens DinkyWinkaz - Black/Clear lens DinkyWinkaz - Black/Iridium lens DinkyWinkaz - Carbon/Clear lens Bulbs - 12v x 23w - pair Bulbs - 12v x 10w - pair

Universal Micro Oval indicators are an ideal way to replace standard large indicators. Available in Black, or Carbon Look with either a clear or amber lens, Micro Oval indicators look great on any bike. Universal fitment, complete with bulbs and wiring. ALSO AVAILABLE - LED VERSION Dimensions: 55mm L, 23mm W, 41mm H, 22mm Stem, 9mm bolt fixing

H L

CODE OI1 OI2 OI4 OI5 OI6 OI7 BU21 BU10

DESCRIPTION MicroOval - Black/Amber lens MicroOval - Black/Clear lens MicroOval - Carbon/Clear lens MicroOval - Black/Iridium lens MicroOval - Carbon/Iridium lens MicroOval - LED Black/Clear lens Bulbs - 12v x 23w - pair Bulbs - 12v x 10w - pair

Stem H

6 48

7 8

MicroFairing indicators

MicroDiamond indicators

L Are you bored with your big, ungainly, easily damaged standard indicators? Have you just bought a really trick High Level Exhaust pipe, only to get home and find out that the indicators are in the way? T E C H Problem solved with our Micro Diamond Indicators! ALSO AVAILABLE These tiny indicators will fit almost any bike; they are just as bright as your original ones, but are less than half the size. They are available in a choice of Carbon Look or Black finish, and you CODE DESCRIPTION can even choose between amber or clear lenses. MIO1 DinkyWinkaz - Black/Amber lens MIO2 DinkyWinkaz - Black/Clear lens ALSO AVAILABLE - LED VERSION MIO4 DinkyWinkaz - Carbon/Clear lens Dimensions: MI10 DinkyWinkaz - LED Black/Clear lens 55mm L, 31mm W, 46mm H, 8mm BU21 Bulbs - 12v x 23w - pair Stalk, 9mm bolt fixing

BU10

Bulbs - 12v x 10w - pair

Universal Micro Fairing Mount indicators provide a streamlined alternative to the standard fitment ‘stalked’ indicators. Available with 4 lens types Amber, Clear, Smoke and Iridium complete with 3M adhesive pads on the rear for easy installation. Dimensions: 64mm L, 32mm W, 20mm H, Adhesive pad fixing

CODE FM1 FM2 FM3 FM4 BU21 BU10

DESCRIPTION MicroFairing - Amber lens MicroFairing - Clear lens MicroFairing - Smoke lens MicroFairing - Iridium lens Bulbs - 12v x 23w - pair Bulbs - 12v x 10w - pair H

Mini fairing indicators

These unique slimline indicators can be easily fitted to fairings and bodywork, giving a neat flush finish. Complete with bulbs and wiring and available in both Matt Black and Carbon Look finishes. We recommend that these indicators should be used in conjunction with standard manufacturer's lighting or other CE approved replacement indicators. CODE DESCRIPTION Dimensions: 92mm L, 56mm W, 32mm H.

WL07 Mini Fairing - Black

m o t r a x . c o. u k

LIGHTING 06 Stem

W Stem L

Mini indicators These mini indicators are manufactured with a choice of Carbon Look or Matt Black styling, adding that finishing touch. Complete with bulbs and wiring. We recommend that these indicators should be used in conjunction with standard manufacturers lighting or other CE approved replacement indicators. Dimensions: 51mm L, 40mm W, 38mm H, 18/40mm Stalk, 8mm bolt fixing

CODE WL01 WL02 WL10 WL11 WL14 WL15 WL04 WL12 WL13 WL16 WL17 MI05

DESCRIPTION Mini - Black/Amber - short stem Mini - Black/Amber - long stem Mini - Black/Clear - short stem Mini - Black/Clear - long stem Mini - Black/Iridium - short stem Mini - Black/Iridium - long stem Mini - Carbon/Amber - long stem Mini - Carbon/Clear - short stem Mini - Carbon/Clear - long stem Mini - Carbon/Iridium - short stem Mini - Carbon/Iridium - long stem Bulbs - 12v x 23w - pair

WibblyWobbly 1 Enduro indicators W Ideal for bikes used off and on road, WibblyWobbly 1s have a strong, silicon stem, so instead of snapping off under impact, they CODE DESCRIPTION will merely bend, then spring back into place IW1 WibblyWobbly1 undamaged. Complete with bulbs and wiring. (For off road use only) We recommend that these indicators should be used in conjunction with standard manufacturer's lighting or other CE approved replacement indicators Dimensions: 50mm L, 35mm W, 35mm H, 26mm Stalk.

2 3

SORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCES IndyLeads Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings…Not any more! Simply connect the IndyLeads to between the original connector and the universal indicator… SIMPLES!!

FLASHIN G TOO FAST ?

Flash’it relay

L.E.D. indicator problems? Fix it in one easy step with this replacement flasher relay. Simply unplug the old and plug in the new, job done! No cutting of wires required when fitting the bike specific CODE DESCRIPTION relays. Wires may need to be cut when using the FRH1 Flash’it - Honda universal relay. FRH2 Flash’it - Honda (4 pin) NOTE: In some instances indicator switch will remain active after ignition is turned off.

FRK1 Flash’it - Kawasaki FRY1 Flash’it - Yamaha FRU1 Flash’it - Universal

IndySpacers Fitting a set of after market indicators is now a straight forward task. The Motrax Indicator mounting kit neatly fills the holes in the fairing left by the standard indicators. Any set of Motrax universal indicators can now be fitted without leaving unsightly gaps or holes at the mounting point. Rid your bike of the unsightly, oversized indicators and bolt on some style!!!

MAKE/MODEL Honda, CBR600 / RR Honda, CBR900RR Honda, CBR1000RR Honda, HORNET 600/900 Honda, HORNET 600/900 Honda, SP1 / SP2 / Blackbird Kawasaki, ZX6R / RR Kawasaki, ZX7R Kawasaki, ZX9R Kawasaki, ZX12R Kawasaki, ZRX1200S Kawasaki, ZR7S

YEAR 99>03 92> 04> 2001 02> ALL 98-04 ALL 98-03 ALL ALL 03>

FRONT ISH1 N/A ISH1 ISO1 ISH1 N/A ISK1 ISK1 ISK1 N/A ISK1 ISK1

REAR ISH1 ISH1 ISH1 ISO1 ISH1 ISH1 ISK1 ISK1 ISK1 ISK1 ISK1 ISK1

CODE ILH1 ILH2 ILS1 ILY1

DESCRIPTION Honda/Kawasaki (2 Pack) Honda 04/05 (2 Pack) Suzuki (2 Pack) Yamaha (2 Pack)

MAKE/MODEL Suzuki, SV650 Suzuki, SV650/S Suzuki, GSXR 600 / 750 Suzuki, GSXR 600 / 750 / 1000 Suzuki, BANDIT 600/1200/1200S Suzuki, GSXR1300 HAYABUSA Suzuki, TL1000R / S Suzuki, SV1000 Yamaha, THUNDERCAT Yamaha, FAZER600 Yamaha, FZ6 / FZ1 FAZER Yamaha, YZF-R6 Yamaha, YZF-R6 Yamaha, YZF-R6 Yamaha, YZF-R1 Yamaha, YZF-R1 Yamaha, FAZER 1000 Yamaha, THUNDERACE Yamaha, FJR1300 Multi Fit Round

CODE ILH4 ILH5 ILS4 ILY4

YEAR 99-02 03> 96-00 01-05 01> ALL ALL 03> ALL 98-03 03> 99-02 03-05 06> 98-01 02> 98> ALL 98>

DESCRIPTION Honda/Kawasaki (4 Pack) Honda 04/05 (4 Pack) Suzuki (4 Pack) Yamaha (4 Pack)

FRONT ISS1 ISS2 ISS1 ISS2 ISS2 N/A ISS1 ISS1 N/A ISY1 ISY3 ISY1 ISY2 ISY3 ISY1 ISY3 ISY1 N/A ISY1 ISO1

REAR ISS1 ISS2 ISS1 ISS2 ISS2 ISO1 ISO1 ISS1 ISY1 ISY1 ISY2 ISY1 ISY2 ISY2 ISY1 ISY2 ISY1 ISY1 N/A ISO1

5 6 49

7 8

SORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCES

m o t r a x . c o. u k

06 LIGHTING

1 2 3

LED Chrome Bolts These LED Bolts are an ideal way to stylise your bike. High quality aluminium bolts have been carefully machined to allow for an internal LED which shines out through the side of the bolt. The chrome finish allows the bolts to stand up to the elements and road salt all year round. Can replace existing bolts to illuminate parts of the engine, number plate, swing arm etc

CODE DESCRIPTION LEDCB Chromed LED bolts

LED Number Plate Light

T E C H

• Compact replacement for bulky OE fitments. • 12V low-power consumption with 3 superbright LEDs. W • Single bolt fixing. • 300mm of cable included Dimensions: 55mm (W) 15mm (D) 40mm (L)

T E C H

CODE DESCRIPTION MNPL LED Number Plate Light

T E C H

4 5 6

Black Stainless Steel LED No. Plate Light One of the first changes made to bikes by riders is to remove the large ugly number plate hanger. This can often leave the bike without a number plate light. This stainless steel unit solves this issue and due to its high quality will last for years to come. Made from black stainless steel with 3 bright white CODE DESCRIPTION LED’s, the internals are sealed to keep water out Stainless Steel LED ensuring you remain legal no matter what weather SNPL No. Plate Light or conditions you ride in.

LED Number plate light Many after market tail lights/ undertrays do not come complete with a numberplate light. This is a legal requirement and if not adequate can lead to unwanted attention when riding at night. The Motrax LED Number Plate Light contains 4 high intensity LED’s and can be positioned on either the bodywork or numberplate to achieve the best effect. Available in Black or Clear Aluminium.

CODE LPL1 LPL2

DESCRIPTION LED Number plate light - Clear LED Number plate light - Black

T E C H

L.E.D.-Eyes rear light unit Give your motorcycle a new and unique look with these stunning round LED rear lights. Easy to fit, replacing bulky OE fitments, L.E.D.-Eyes incorporates running light, brake light and numberplate light behind a clear lens in a lean, light unit, really flaunting your bike’s rear Dimensions (approx.) 170mm (L) x 100mm (W) x 50mm (D)

CODE DESCRIPTION LEDE2 L.E.D.-Eyes - Chrome LEDE3 L.E.D.-Eyes - Matt Ally

8 T E C H

m o t r a x . c o. u k

LIGHTING 06 LED Shark rear light unit

Give your motorcycle a new and unique look with these sharp looking LED rear lights. Easy to fit, replacing bulky OE fitments. LED Shark uses the latest ultrabright LEDs which incorporates running light, brake light behind a clear lens in a lean, light unit, really flaunting your bike’s rear. Dimensions (approx.) 130mm (W) 35mm (H) 75mm (D).

2 3

T E C H

LEDCyclops rear light unit Using the latest ultra-bright LED technology Cyclops LED tail lights offer uncompromised performance. Easy to fit, with tail, brake and number plate light all incorporated into a quality unit with built in numberplate bracket. Available in Black, Chrome and Matt Aluminium. CODE DESCRIPTION Dimensions (approx.) 170mm LEDC1 LEDCyclops - Black (W) 50mm (D) 70mm (H). LEDC2 LEDCyclops - Chrome

T E C H

CODE DESCRIPTION LEDS1 LED Shark rear light unit

LEDC3 LEDCyclops - Matt Aluminium

LEDLitedistrik rear light unit Advertise your presence on the road with these funky LED rear lights. Available in two sizes and easy to fit, replacing bulky OE fitments, LEDLiteDistrik use the latest ultra-bright LED technology. Incorporates running light, brake light and number-plate light behind a clear lens in a lean, light unit, really flaunting your bike’s rear. Dimensions (approx.) LEDL1: 110mm (L) x 28mm (W) x 32mm (D) LEDL2: 120mm [L) x 33mm (W) x 38mm (D)

5 6 51

T E C H

LEDFoxTail rear light unit Brighten up your bike with these eye-catching LED lights. By using the latest extrabright LED technology, the LED FoxTail units are far brighter than standard bulbs. The units incorporate a running light, brake light and number-plate light. LED Foxtail gives improved visibility in a stylish, easy to fit unit with a choice of chrome or black finishes. Dimensions (approx.) 160mm (L) x 45mm (W) x 50mm (D)

CODE LFT1 LFT2

DESCRIPTION LEDFoxTail - Black LEDFoxTail - Chrome

CODE DESCRIPTION LEDL1 LEDLitedistrik - small LEDL2 LEDLitedistrik - Large

T E C H

m o t r a x . c o. u k

06 LIGHTING

UPGRADE and REPLACEMENT LIGHT BULBS Motrax Replacement Bulbs Stand out from the crowd

Our range of headlamp bulbs are specifically designed to meet the needs of the modern motorcyclist. With improved brightness, longer beam throw and increased lifespan, these bulbs are the ideal replacement and upgrade to original fitment on all motorcycles.

3 H4 MotoVision Bulbs

H4/H7 Bulb Travel Kits Everything you need for your journey in a tough plastic case. Carrying spare bulbs is now a legal requirement throughout most of the EU community. Avoid being stranded in darkness on an unfamiliar road, or the unwanted attention of the long arm of The Law - pack a kit in your luggage today.

CODE DESCRIPTION PBKH4 H4 Power Bulb Kit PBKH7 H7 Power Bulb Kit

H7 BlueVision Bulbs

6 52

Designed especially to make motorcycles more visible, MotoVision bulbs give the rider a clear white light, but the oncoming driver or pedestrian will see an orange tint. This will set the bike apart from the sea of white and blue lights from cars and trucks. Featuring 40% more white light than any other bulb with a 10-20 metre longer beam.

CODE DESCRIPTION PBVH7 H7 BlueVision bulb (single)

Designed especially to make motorcycles more visable, MotoVision bulbs give the rider a clear white light, but the oncoming driver or pedestrian will see an orange tint. This will set the bike apart from the sea of white and blue lights from cars and trucks. Featuring 40% more white light than any other bulb with a 10-20 metres longer beam.

CODE DESCRIPTION PBMH4 H4 MotoVision bulb (single)

H4/H7 Xtreme Bulbs The ultimate in direct bulb upgrades. X-treme Power bulbs enhance your headlights with up to 80% more light than standard halogen bulbs, yet they're fully road legal and are made to the highest possible standards meaning they will last just as long too. Extreme performance for bikers who demand the very best headlights.

CODE DESCRIPTION PBXH4T H4 Xtreme bulbs (pair) PBXH7T H7 Xtreme bulbs (pair)

H7 Vision Plus Bulbs Vision Plus xenon headlight bulbs provide up to 50% more light on the road. Vision Plus bulbs are E marked and road legal.

CODE PPH7

DESCRIPTION H7 Vision Plus bulb (single)

SCOOTER UPGRADE Scooter Vision

Halogen 35W Replacement bulb Had enough of that pathetic candle-light output from your standard scooter headlamp? Be safe and be seen - and see what's ahead with this Halogen upgrade. UV blocker - safe for use with plastic headlamp lenses these 12v 35/35W main and dip headlamp bulbs cast a brighter, whiter light for the road ahead.

CODE PSS2

DESCRIPTION ScooterVision 12v 35/35W Bulb

Base of bulb contacts