Tyre Equipment Suppliers in Malaysia by Mr SEO

PRODUCT CATALOGUE VOL. 2

Our brand

ï»¿

INDEX Product catalogue Vol. 2

Contents INTRO ii

1.0 AUTOMOTIVE GARAGE EQUIPMENT 1.1 WHEEL SERVICING

1.2 LIFTING EQUIPMENT

1.3 LUBRICATION TECHNOLOGY

1.4 DIAGNOSTIC & ANALYSIS

109

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

129

2.0 AUTOMOTIVE TOOLS & ACCESSORIES 2.1 BATTERY & ELECTRICAL

141

2.2 ENGINE & TRANSMISSION

145

2.3 UNDERCAR & SUSPENSION

159

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

167

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

183

2.6 PNEUMATIC TOOLS & ACCESSORIES

193

2.7 SOCKETS & WRENCHES

203

2.8 GENERAL TOOLS

223

DISCLAIMER 245 NOTES 246 GRAPHICAL INDEX 249

ï»¿

INTRO Product catalogue Vol. 2

, which stand for Leading Solutions, comprise a team of specialist in supplying quality professional workshop tools and equipment which has evolved since 2001, to now a trusted distributor in Malaysia. We owe our success to the continuous effort in servicing our clients thus, making us a priority choice. With these tremendous supports, we are determined to work even harder for you!

As our name implies, our philosophy is to provide our customers with quality and innovative products to meet their growing workshop needs. We understand that the automotive industry at present has grown to a stage where conventional tools are no longer capable of handling the growing demand of todayâ&#x20AC;&#x2122;s vehicles. In order to achieve that, we are constantly searching for new and innovative, yet user-friendly and practical equipment to meet your demand.

ďťż

To know you better, we put your customers in our mind. We understand that eventually, our products need to benefit end users who visit your workshop. By putting them in mind to start with when we serve you, we can save your time and hassle of thinking how our products can benefit you and in turn bring higher revenue. We focus on delivering a quality service from purchasing all the way to after sales service. Our commitment to you is backed by research, innovation and a team of service professionals who understand your needs and are able to give you the best suitable advice for your workshop. With our past experience and understanding of the automotive industry, we are confident that we will be able to help serve you beyond your requirements. Our stronghold is our service spirit. We strive to make you feel satisfied.

INTRO Product catalogue Vol. 2

CERTIFICATE OF APPOINTED DISTRIBUTOR

ï»¿

iii

INTRO Product catalogue Vol. 2

CERTIFICATE OF APPOINTED DISTRIBUTOR

TO WHOM IT MAY CONCERN Correggio, Italy, July 22nd, 2013

Correggio, July , 22 , 2013

DISTRIBUTION AGREEMENT DECLARATION

We, GIULIANO INDUSTRIAL S.p.A, Automotive Equipment Manufacturing Company since 1976, based in Correggio (Italy), Via Guerrieri, 6 – 42015, hereby duly represented by Mr. Gianluca Maselli, in his capacity as President Declare That the Messrs.

LS AUTOMOTIVE SDN BHD No. 34, Jalan TPP 1/19 Taman Perindustrian Puchong Batu 12, 47100 Puchong, Selangor, Malaysia Tel: +603 8060 6961 Fax: +603 8060 6923 E-mail: lees@tm.net.my; lsauto@streamyx.com www.ls.com.my Tax Number: 623664-A

Dear Sirs , hereby we M&B engineering S.r.l , declare that the company

LS AUTOMOTIVE SDN BHD BATU 12 , 47100 PUCHONG , SELANGOR MALAYSIA Is appointed as

’’EXCLUSIVE AGENT’’

Company having its registered office in MALAYSIA,

Is our official authorized Importer/Distributor for Sales and After Sales of the GIULIANO INDUSTRIAL branded Tire Changers, in the whole country of Malaysia.

MALAYSIA Territory.

The above is stated and released for any and all uses admitted by law. In Witness thereof p. GIULIANO S.p.A. Gianluca Maselli President

According to this agreement we also attest that LS AUTOMOTIVE can ensure Sales ,Technical Assistance , Installation and After Sales Services as far as M&B’s products are concerned This authorization can be renew only by another official written letter Your sincerely

Giuliano Industrial S.p.A. a socio unico V i a G uerri eri, 6 – 42015 C O R RE G G IO (R eggi o E. ) – T el ef ono 0522 73. 11. 11. – T el ef ax 0522 63. 31. 09 - P .O . B O X 58 Capitale Sociale € 1.000.000 - Iscrizione Registro Imprese: 02455340352 - Codice Fiscale e Partita IVA 02455340352 - R.E.A. n: 283009 http://www.giuliano-automotive.com – e-mail:info@giuliano-automotive.com Società soggetta a direzione e coordinamento da parte di GIULIANO GROUP S.p.A.

________________ Massimo Magnani M&B Sales Director

_______________ Ling Lay Ung LS automotive

INTRO Product catalogue Vol. 2

CERTIFICATE OF APPOINTED DISTRIBUTOR

ï»¿

INTRO Product catalogue Vol. 2

AFTER SALES SERVICE & SUPPORT NATIONWIDE Area

Contact

Address

Kuala Lumpur, Selangor, Seremban & Melaka

Tel : 03-8060 6961 / 016-262 8223 Fax : 03-8060 6923 Website : www.ls.com.my E-mail : lses@tm.net.my

No. 34, Jalan TPP 1/19, Taman Perindustrian Puchong, Bt 12, 47100 Puchong, Selangor D.E.

Perak, Penang, Perlis & Kedah

Tel : 012-411 3395

No. 11A, Jalan Cengal 1, Taman Industri Cengal, 13400 Butterworth, Penang.

Ipoh

Tel : 016 - 511 5960

No. 86, Laluan Bercham Utara 20, Taman Utama, 31400 Ipoh, Perak.

SOUTHERN REGION

Melaka & Johor

Tel : 012 - 727 7524

No. 26, Jalan Kempas 4, Taman Megah Ria, 81750 Masai, Johor.

EAST COAST

Pahang, Terengganu & Kelantan

Tel : 019 - 987 9717

No. A5492, Ground Floor, Jalan Berserah, 25300 Kuantan, Pahang.

Sabah

Tel : 016 - 820 0999

Lot 5, WK Commercial Centre, Jalan Bundusan, Penampang, 88300 Kota Kinabalu, Sabah.

Sarawak

Tel : 016 - 889 5101

290, Ground Floor, Jalan Datuk Wee Kheng Chiang, 93100 Kuching, Sarawak.

KLANG VALLEY

NORTHERN REGION

EAST MALAYSIA

ï»¿

INTRO Product catalogue Vol. 2

OPERATION, TRAINING & EXHIBITION

ï»¿

vii

INTRO Product catalogue Vol. 2

PORTFOLIO

viii

ï»¿

AUTOMOTIVE GARAGE EQUIPMENT

WHEEL SERVICING

1.1 4

Wheel Aligner with Infrared CCD Sensors

1.1 WHEEL SERVICING

Features : • • • • • •

• C 200

•

Ref. Power supply Overall power draw Noise level when running Main unit weight Measuring head weight (all) Radio measuring head batteries

C 200 230 V - 1 Ph 400 W < 70 dB (A) 65 kg 12.8 kg 4.8 Vcc - 3000 mA

Measuring range:

Front and rear toe

± 20°

Camber

± 10°

Caster

± 30°

King-pin angle

± 30°

Set back

± 10°

Thrust angle

± 10°

Steering angle

± 10°

AUTOMOTIVE GARAGE EQUIPMENT

PC-Based wheel aligner with 8x4 wireless sensors. Multilanguage Windows O/S. Light and easy-to-handle measuring heads, with 2 high resolution cameras, electronic inclinometer and level. 01 Manufactured with materials and technical solutions to reach the highest reliability. Monolithic head body in cast aluminium for extreme precision. Designed and produced in Italy according to the most innovative technologies, C 200 offers stable measurements both in difficult working places and in unfavorable lighting conditions. Power supply by means of commercial and rechargeable batteries (AA type) of high efficiency. Longer durability and low cost of replacement when the battery life cycle is over,. Battery recharge system integrated in the cabinet, indication LED in the control panel of the measuring head. Emergency cables available on request. 02

•

• • •

•

Angle adjustment displayed in comprehensive coloured fields. Toe curve adjustment. Animations and IR remote control on request. 03 Push-mode ROC with wheels lifted or for one wheel. 04 Quick working procedures and accuracy guaranteed by professional operational programs. Data bank with over 20,000 vehicles with dedicated list according to different international markets. Comfortable update of new vehicles on-line via internet. Cal One-Touch, calibration device for the steering wheel sensor; integrated in the software of the wheel aligner. Time and cost-saving tool to align the steering wheel sensor with the thrust angle according to the Car Makers prescriptions for the vehicle equipped with safety devices like ESP (Electronic Stability Program). 05

1.1 WHEEL SERVICING

Standard Accessories for C 200

Turntables for cars.

4-point clamps from 10” to 26”.

Cal One-Touch

Optional Accessories for Trucks

4-point clamps from 17.5” to 25”.

Turntables for trucks.

AUTOMOTIVE GARAGE EQUIPMENT

Wheel Aligner with Infrared CCD Sensors

1.1 WHEEL SERVICING

Features : • • • •

• • • • C 400 C 400T

•

Ref.

± 48º

Thrust angle

± 24º

Rear steering angle

± 24º

Front steering angle

± 60º

Front and rear king pin angle

± 10º

Front king pin angle and caster

± 30º

Front included angle

± 40º

Front axle deflection Power supply Weight

C 400 / C 400T

Front and rear toe

AUTOMOTIVE GARAGE EQUIPMENT

± 24º 230V 1ph 125 Kg

Data Transmission Method: Radio & cable. Protected Compartment for PC and printer. Wireless measuring heads equipped with a 2.4 GHz FHSS multichannel radio system. Built-in chargers in the measuring heads, with battery in “chargeposition” while hanged on the cabinet and during the cables are in use. 01 Computerised wheel aligner with 8x4 infrared CCD sensors. Electronic levelling device displayed both on the control panel and on the screen during adjustment. 02 Quick control keyboard on the panel of measuring head. 03 LEDs to show the angle tolerances (“traffic lights”) positioned at the end of each sensor arm, so visible once adjustment are performed from the pit or under the lifts. 04 User friendly software: Intuitive and innovative, meeting the increasingly professional needs including customized requirements of car manufacturers. 04 Program for trucks and trailer available - C 400T.

•

Adjustments: Full data information displayed in friendly coloured fields.

•

Animations (optional): Step-bystep adjustment procedures with animated video. 07 Spoiler Program for sport cars without using adapters. Toe curve adjustment (optional): Special dedicated procedures for VW, Mercedes, trucks and heavy duty vehicle. Databank: About 20,000 vehicles to cover every market-area worldwide. 08 Run-Out-Compensation available in 3 versions: push-mode, 3-point and single wheel ROC assisted by encoder.

• •

•

09 10

Smart-Card technology for software and data bank updating.

for C 400 & C 400T 02

1.1 WHEEL SERVICING

Standard Accessories for C 400

Turntables for cars.

4-point clamps from 10” to 26”.

Cal One-Touch

Standard Accessories for C 400T

4-point clamps from 17.5” to 25”.

Turntables for trucks.

AUTOMOTIVE GARAGE EQUIPMENT

WHEEL ALIGNER with Imaging Technology

1.1 WHEEL SERVICING

Features •

•

• • • • • • • •

C 800

• 01

Quality camera 3D system with two cameras reading system, reliable and capable of self adjustment to light conditions. 01 PC with Windows OS. User friendly & professional wheel alignment software features quick and precise alignment measures. 0.01° data display. Easy access to all adjustment values. Maximum steering without expensive electronic turntables. Graphic values display for easier adjustment. Chassis measurement data. Factory pre-calibrated cameras for shorter calibration on installation. Two targets working procedure available. Multi-brand International vehicle data base on HD with more than 15,000 vehicles. User databank for new vehicle data. Job operation customer data bank, 02

Ref.

C 800

Power supply

230 V - 1 Ph

Noise level when running

< 70 dB (A)

Measuring range:

Front and rear toe

± 20°

Camber

± 10°

Caster

± 30°

King-pin angle

± 30°

Set back

± 22°

Thrust angle

± 22°

Steering angle

± 35°

AUTOMOTIVE GARAGE EQUIPMENT

• • • • • •

•

to save and recall all customer data. Wall mounting kit for clamp and target storage. Set of four 11” to 23” 4-point clamps with passive targets made of resistant materials. 02 Main unit complete with compact PC housing and comfortable worktop for keyboard and printer. 03 Smart trolley for faster operation and more comfortable positioning (optional). 04 Lift drive-on assistant by remote camera for easy vehicle positioning (optional). 05 Intuitive and user friendly software with two key selection and guided procedure. Skip and Push-mode ROC available. 06 Pair of mechanical turntables and adaptors for push-mode ROC procedure supplied as standard. 07

WHEEL ALIGNER Features • •

•

8 High resolution digital cameras for maximum measurement accuracy and stability. Automatic rotation of cameras: according to the sequence step, cameras automatically rotate up to the specific working position set in advance. It is possible to record customised set of lift height levels, coupling them up to five different operators. 01 Targets manufactured with very highresistance materials. Additional sunfilter. Suitable for difficult working conditions. No need of maintenance and calibration. 02 Console for PC, keyboard, printer and LCD monitor. After operations, targets can be easily hanged on both sides of the column. 03

•

• •

1.1 WHEEL SERVICING

with Imaging Technology

Professional wheel alignment programme. Customisable procedure, adjustment help animations, ROMESS compatible. 04 05 06 Push-mode off-centre compensation: makes it possible to work without lifting the vehicle and keeping the suspensions in their normal operating position. Maximum accuracy and speed. 07 Multibrand database with more than 20,000 cars and vans. Always updated and full vehicle specs. Smart card technology for software and databank updating. 08 Animated help for vehicle adjustment. 09

Pre-set for CAL One-Touch (steering sensor calibration), Aligner OnLine and ROMESS CM 09606.

C 1000 iNEXT

Ref. Power supply

C 1000 iNEXT 230 V - 1 Ph

Total toe

± 20°

Camber

± 10°

Caster

± 30°

King-pin angle

± 30°

Thrust angle

± 10°

AUTOMOTIVE GARAGE EQUIPMENT

WHEEL ALIGNER with Imaging Technology

Features 1.1 WHEEL SERVICING

• • • •

•

SSENCE 400

•

SSENCE 600 Height of the cameras adjustable, motor powered. Measuring at floor level, adjustment at working height. 32" Widescreen Monitor. Adjustable height for the best view. Deluxe cabinet. Keyboard and mouse dust protected in a drawer. SSENCE 400 Height of the cameras adjustable into a fixed position. For the best position between floor level and adjustment height. Standard cabinet with 19” widescreen monitor. SSENCE 400 & 600 SSENCE SOFTWARE: We have created software with features that you really

Standard Accessories • •

Original AUTODATA database with more than 15,000 cars. PC with Windows 7 Ultimate, keyboard, mouse, and colour printer.

Main Options • • •

SSENCE 600

Software for 2-wheel alignment (in preparation). Remote control (WLAN). Update of the database every 6 months.

Optional Accessories

Remote Control

AUTOMOTIVE GARAGE EQUIPMENT

•

• • •

need. We don’t provide procedures that you will not need. This helps you and your staff to concentrate on essential things only. EASY INSTALLATION 1. No need to fine adjust the lift. The aligner is measuring just the car body itself. 2. No need to do calibrations. The aligner comes with the cameras pre calibrated. LESS MAINTENANCE 1. The reflecting target plates work without any electronics and batteries. 2. No problems with unreliable measuring data because no wireless transmission.

4-point universal clamps 11” - 23” with target discs. Steering wheel - and brake pedal holder. Turning plates.

1.1 WHEEL SERVICING AUTOMOTIVE GARAGE EQUIPMENT

Wheel Clamp

1.1 WHEEL SERVICING

for Wheel Aligner

Sensor Pin.

Hub.

AA 13-30

Features • • •

Universal self-compensating wheel clamp. A state-of-the-art laser system tests all wheel clamps, one by one, before delivery. Particularly, all surfaces and the orthogonal precision of the sensor fixing room are granted as 100% precise on all our models.

Spacers for convex rims included.

Wheel Balancer for Motorcycle Wheels

Features • •

2002601

AUTOMOTIVE GARAGE EQUIPMENT

Standard static balancer for motorcycle wheels. Complete with indexing spirit level.

wheel balancer with Digital Display

• • • •

1.1 WHEEL SERVICING

Features :

Version with manual input of wheel diameter and distance. Double spinning button. Low rotation speed and double spinning button, allowing the machine to be used without wheel guard in EEC area. Double display control panel with multifunction and interactive keys.

B 215 Note: Wheel guard is available as optional.

Features : • • • • • •

A computerized digital wheel balancer with a single, fully automatic cycle. Easily access to the different programs using the various function keys. Simultaneous weight and position readings on the double display. Self-diagnosis and calibration ensure exceptional accuracy and easy maintenance. 01 Wheel protection guard that allows balancing of 1,120 mm (44”) diameter wheels. Automatic width gauge. 02 Operation: Motorized spin. Easy Maintenance: Self-diagnosis and calibration ensure exceptional accuracy. Brake Pedal: For accurate positioning of counterweights. 03

• • •

Aludata program that resolves all the problems of balancing aluminium rims. Hidden spoke program that hides adhesive weights behind the rim spokes, optimizing the quality/ aesthetic ratio. Adhesive Weight Holder: The arm in the central part of the weight holder panel indicates the exact position for application of adhesive weights. 04 05 06

WB 277 N 01

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer with Digital Display

1.1 WHEEL SERVICING

Features : •

• • •

• B 235

•

Weight tray with appealing design and shapes designed to allow maximum access to inside the wheel. The anvil can be used to prepare or regenerate clip weights without damaging the weight tray. 01 The side accessory compartment has been designed to store universal flanges, cones and bushes. 02 The new wheel guard allows use with wheel sizes up to 44”. 03 Spin And Measuring Unit: Sized to work with high offset wheels without the need for additional spacers. Automatic brake at the end of the spin. Reduced cycle time and high performance. 04 The “zero” maintenance motor and highly innovative design solutions guarantee reliability, sturdiness and high work loads. “TwinLight” Technology: The LASER pointer helps to place the counterweights more quickly and more precisely. The inside wheel LED light makes it easier to take measurements, apply counterweights and clean and check possible rim damages. 05

AUTOMOTIVE GARAGE EQUIPMENT

• • • • • •

•

Quickly and intuitive sensitivity calibration by simply applied the sample weight directly to the spin unit. 06 Electronic input of wheel diameter and distance with positioning of adhesive weights at 3-6-12 o’clock. (TP25: optional ALU weight holder clip). 07 TE40 Automatic external gauge for wheel width measuring (optional). 08 SL 80 pneumatic lift (optional), handy and functional for effortless lifting and positioning of wheels up to 80 kg. 09 High performance digital wheel balancer with latest generation software solutions. A double display control panel enables a quick and intuitive selection of the balancing mode and immediate access to the most common operating functions. 10 Pedal wheel holder shaft locking brake, makes easier both the wheel clamping and unclamping options as well as the application of weights. 11

wheel balancer Features : • • • • • • B 245 Note: Wheel guard is available as optional.

•

High performance wheel balancer with LCD display, latest generation microprocessor unit and attractive and original design. 01 Control unit including backlit display with highdefinition graphics and touch-sensitive keypad with tactile dome keys. 02 Weight tray ergonomic and functional, it features many large trays to house all different types of counterweights and the various tools. 03 Space-saving wheel guard designed to allow the positioning along the wall, it also permits to hold wheels up to 44” max. diameter. 04 Inclined front side for higher ergonomics and easier access of the operator to the inner part of the rim. New digital gauge for acquisition of diameter and distance. Max. precision and smoothness with integrated AUTOSEL function which automatically activates the balancing programmes, avoiding keypad selection. 05 Three modes to position the adhesive counterweights, with the weight holder clip, with the 6 o’clock laser indicator, or manually at 12 o’clock. 05

• •

•

• •

SMD Automatic Sensor for measurement of wheel width (optional). 06 Automatic calculation of the width (AWC function) even if the SMD external sensor is not present. The wheel balancer calculates the width by reducing the operational time. New “ELECTROLOCK” automatic electromechanical wheel clamping system for shorter operative times and higher centering accuracy (B 245 C), or manual wheel clamping with quick ring (B 245). 07 The wheel is braked and put in balancing position at the end of the spin. Integrated LED Spotlight to light-up the work area and make it easier to clean the rim, check the wheel and apply weights. 08 The adhesive counterweights can be positioned extremely rapidly using the laser pointer at 6 o’clock. 09 SL-Ø WHEEL LIFTING DEVICE. “Weightless effect” wheel lifter which eliminates operator effort speeds up routine operations and ensures perfect centring thanks to the self-balancing function. 10

1.1 WHEEL SERVICING

with Digital Display

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer

with Digital Display

1.1 WHEEL SERVICING

Features : • • • • •

Highly luminous display with intuitive controls. Easy to use in any condition. Large size ergonomic weight storage deck. 01 Automatic balancing with electronic brake at the end of the cycle. 02 Adhesive weights, can be applied in an ergonomic position at the operator’s choice. Data acquisition with manual sensor. 03 Sturdy structure with built-in three-point foot. 04 Large size guard casing suitable for wheels up to 1110mm diameter. 05

B 40 Note: Wheel guard is available as optional.

Features : • •

• • •

• Megaspin 400

• • •

AUTOMOTIVE GARAGE EQUIPMENT

Easy Auto Select. Automatically detects the 3 most important balancing programs by moving the gauge to the positions, where the weights to be attached. 01 Unlimited choices for optimum weight positions, for alloy, RUN FLAT and PAX rims. The flexible link in the MEGASTICK follows the contour of the rim for measuring and weight attachment at exactly the 12 O-clock position. All done in one spin cycle! 02 Auto sense the rim width by simply closing the wheel guard. 03 Laserpointer. The positions for adhesive weights are shown in the view of the operator, and also check whether these spots are clean. 04 WeightLESS. Balance weights and positions are optimised within thresholds for static and dynamic unbalances. In ideal case only one single weight must be applied. Thus significant amounts of weights and working time can be saved. MINISTAT. Minimises the residual static unbalance. Residual static unbalance is the cause of many vibration problems. Less energy consumption, less wear and tear & less noise. 05 With the new, upgraded AUTO SPLIT function, it is even easier and faster to split weights. 06 Space saving wheel guard can be placed right against a wall.

wheel balancer Features : • •

•

B 325 A

•

Note: Automatic gauge for wheel width available as optional.

LCD monitor ideal for displaying high resolution graphics and dedicated software. 01 Upon request, the Control Weight programme suite is available, which includes Minimal Weight. This software allows a significant reduction of balancing weights, through the analysis of different threshold values, according to the vehicle type: fast or slow (unique on the market). The spin unit derives from the superior models of the B-Series and provides functional features typical of the upper models: reduced cycle time, measuring wheels weighing up to 75 kg and wheel balancing with inside offset of up to 275 mm without using spacers. The innovative drive and zero maintenance ensure maximum reliability. 02 Low rotation speed and double spinning button allow the machine to be used without wheel guard in EEC area (B 325 model). Also available with automatic spin by pushing down wheel guard (B 325 A model). 03

• •

• • • •

Electronic input of wheel diameter and distance with positioning of adhesive weights at 3-6-12 o’clock, settable by the user. 04 Automatic brake to stop the wheel at the end of the spin, Automatic Position Search (RPA), automatic wheel positioning in the point where the balancing weight has to be applied and electrical positioning brake. Wide space between body and flange, the inner part of the wheel is easily accessible for cleaning and weight positioning (optional ALU weight holder clip). Front support base for balancing wheels up to 50 kg. without fastening the machine to the ground (optional). 05 Automatic external gauge for wheel width measuring (optional). SL 80 pneumatic lift (optional), handy and functional for effortless lifting and positioning of wheels up to 80 kg. in weight. Ideal for car and van wheels. 06

1.1 WHEEL SERVICING

with Colour Monitor Display

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer with Colour Monitor Display

1.1 WHEEL SERVICING

Features : •

• • •

• B 335

•

Note: Wheel guard is available as optional.

•

AUTOMOTIVE GARAGE EQUIPMENT

• • • • •

• •

Electronic input of wheel diameter and distance with positioning of adhesive weights at 3-6-12 o’clock. (TP25: optional ALU weight holder clip). 07 TE40 Automatic external gauge for wheel width measuring (optional). 08 SL 80 pneumatic lift (optional), handy and functional for effortless lifting and positioning of wheels up to 80 kg. 09 LCD monitor ideal for displaying high resolution graphics and dedicated software. 10 Upon request, the Control Weight programme suite is available, which includes Minimal Weight. This software allows a significant reduction of balancing weights. Keypad with reduced number of keys for simple and rapid machine use. 11 Automatic Position Search (RPA). Automatic wheel positioning in the point where the balancing weight has to be applied. Electronic wheel holder shaft locking brake, makes easier both the wheel clamping and unclamping options as well as the application of weights. 12

wheel balancer Features : •

• • • • • • B 345 C Note: Wheel guard is available as optional.

• •

Wide-screen monitor with high-resolution graphics and user interface. 01 Touch-Sensitive keypad with reduced number of keys for simple and rapid machine use. Auxiliary HELP texts. 01 Weight tray ergonomic and functional, it features many large trays to house all different types of counterweights and the various tools. 02 USB Ports for connection to peripheral devices and easy software upgrading. 03 Space-saving wheel guard designed to allow the positioning along the wall, it also permits to hold wheels up to 44” max. diameter. 04 Inclined front side for higher ergonomics and easier access of the operator to the inner part of the rim. New digital gauge for acquisition of diameter and distance. Max. precision and smoothness with integrated AUTOSEL function which automatically activates the balancing programmes, avoiding keypad selection. 05 Three modes to position the adhesive counterweights, with the weight holder clip, with the 6 o’clock laser indicator, or manually at 12 o’clock. 05 SMD Automatic Sensor for measurement of wheel width (optional). 06

•

• •

•

Automatic calculation of the width (AWC function) even if the SMD external sensor is not present. The wheel balancer calculates the width by reducing the operational time. New “ELECTROLOCK” automatic electromechanical wheel clamping system for shorter operative times and higher centering accuracy (B 345 C), or manual wheel clamping with quick ring (B 345). 07 The wheel is braked and put in balancing position at the end of the spin. Integrated LED Spotlight to light-up the work area and make it easier to clean the rim, check the wheel and apply weights. 08 The adhesive counterweights can be positioned extremely rapidly using the laser pointer at 6 o’clock. 09 Control Weight (Optional): Special suite of programs, including the MINIMAL WEIGHT which saves time and minimizes the use of counterweights, for increased economic benefits and environment protection. SL-Ø WHEEL LIFTING DEVICE. “Weightless effect” wheel lifter which eliminates operator effort speeds up routine operations and ensures perfect centring thanks to the self-balancing function. 11

1.1 WHEEL SERVICING

with Colour Monitor Display

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer with Colour Monitor Display

1.1 WHEEL SERVICING

Features : • • • • • WB 680 WB 680 P

•

Computerized electronic wheel balancing machine with LCD monitor and 3D graphics to facilitate all the operator’s working procedures. All car wheels up to 30”, and all light truck and motorcycle wheels up to a maximum wheel diameters of 1120 mm (44”). Automatic faultfinding and automatic self-calibration ensure an extremely simple maintenance. The functional and practical action center gives access to all the machine programs speeding up working (or set up) operations. 01 New weights holder lends the machine a more dynamic and racy look. 02 Motor Inverter Start Up System: makes it possible to start up and stop wheels in very short times (about 7 sec. with a wheel of 15” x 6) and with extremely low noise output from the mechanical group. “Stop On Top” Position Stop Button: simplifies the application of weights on rims by moving the wheel into position and holding it stationary (particularly recommended with the Aludata programmes). 03

AUTOMOTIVE GARAGE EQUIPMENT

•

• •

•

Operate on wheels of maximum weight up to 80 kg and with an internal offset up to 345 mm (distance between the wheel mounting surface and chassis) without the use of any spacers. 04 New pneumatic system with a 60 mm stroke which allows a rapid, reliable and repetitive locking of all wheels. 05 The Eccentricy Program is available as an OPTIONAL on video models. A laser device, combined with a function explanatory graph, give tyre and rim imbalance readings and identify any possible ways of improving wheel spin. 06 Aludata program that resolves all the problems of balancing aluminium rims. The arm in the central part of the weight holder panel indicates the exact position for application of adhesive weights. The newly developed software enables the balancing machine to recognize and automatically select Alu programmes (two internal adhesive weights) with a simple movement of the internal feeler probe. 07 08 09

Laserpointer. The positions for adhesive weights are shown in the view of the operator, and also check whether these spots are clean.

with Colour Monitor Display

Features : • •

• • • Megaspin 1000

Easy Auto Select. Automatically detects the 3 most important balancing programs by moving the gauge to the positions, where the weights to be attached. 01 Unlimited choices for optimum weight positions, for alloy, RUN FLAT and PAX rims. The flexible link in the MEGASTICK follows the contour of the rim for measuring and weight attachment at exactly the 12 O-clock position. All done in one spin cycle! Picture with roller for AVS (option). 02 Auto sense the rim width by simply closing the wheel guard. 03 TPS Tyre Positioning System. The ultimate ride comfort. Automatically and additionally to balancing. TPS is part of AVS (option). 04 WeightLESS. Balance weights and positions are optimised within thresholds for static and dynamic unbalances. In ideal case only one single weight must be applied. Thus significant amounts of weights and working time can be saved. 05

• •

• • • •

MINISTAT. minimises the residual static unbalance. Residual static unbalance is the cause of many vibration problems. CEC Centring Error Check. Sometimes the clamping of the wheel might not be correct. CEC will indicate this problem on the monitor. CEC is part of AVS (option). 06 Ergonomic design with Touch Screen Display. Less energy consumption, less wear and tear & less noise. 07 With the new, upgraded AUTO SPLIT function, it is even easier and faster to split weights. Space saving wheel guard can be placed right against a wall.

1.1 WHEEL SERVICING

wheel balancer

AVS Anti Vibration System The problem: Even after balanced to Zero, some wheels might not run perfectly round on the road. These runout problems will cause vibrations to the suspension and the chassis of the car. The ride of the car will not be smooth and the car has to suffer significant wear and tear.

The solution: With AVS the operator can detect the geometric irregularities of tyre and rim, and compensate and match them with each other in the best possible way. AVS is a powerfull hard- and software, based on the vast experience with our industrial Tyre Matching Machines. 04

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer with Colour Monitor Display

1.1 WHEEL SERVICING

Features : •

• • • • • •

B 540 C

•

AUTOMOTIVE GARAGE EQUIPMENT

Touchscreen Interface. The use-friendly graphics interface, together with the latest touchscreen technology on 16/9 VDU simplify and speed-up all operations and program selection. 01 Multifunction Button. Further speed-up of different routines and programs selection. Weight tray. Ergonomic and functional, it features many large trays to house all different types of counterweights and the various tools. Space-Saving Wheel Guard. Designed to allow the positioning along the wall, it also permits to hold wheels up to 44” maximum diameter. 02 Inclined front side. For higher ergonomics and easier access of the operator to the inner part of the rim. Rear splash guard. With slots for additional accessories. 03 “Electrolock” Wheel Clamping. New automatic electromechanical system for shorter operative times and higher centering accuracy. 04 Touchless System for dimensions measurement. High precision laser sensors automatically measure all dimensions of the wheel in a few seconds during the measurement cycle. 05

•

• •

•

Auto-Positioning. The wheel is braked and put in balancing position at the end of the spin. Integrated LED spotlight to light-up the work area and make it easier to clean the rim, check the wheel and apply weights. 06 Weights application. The internal LASER pointer indicates the exact position of adhesive weights, with maximum precision. Laser run-out. High-precision measurement of radial and lateral run-out of the wheel (1st harmonic and peak-to-peak) and calculation of the better matching between the parts, solving the typical road vibration problems. Control weight. Special suite of programs, including the MINIMAL WEIGHT which saves time and minimizes the use of counterweights, for increased economic benefits and environment protection.

wheel balancer with Colour Monitor Display

• • • •

1.1 WHEEL SERVICING

Features :

Touchless wheel data input by laser. 01 02 Clear laser indication of adhesive weight placements. 03 Free choosable print out parameters. 04 Ergonomic design with Touch Screen Display.

Megaspin 2000

Zero Weight Lift Balancing

Tread Depth and Wheel Conicity

Tyre, Rim, and Wheel Eccentricity

Best Tyre Positioning

Statistics

Zero gravity effect. Effortless wheel loading and removal without pre‑adjustment.

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer

for Heavy Duty Vehicles with Digital Display

1.1 WHEEL SERVICING

Features : • • • • • • • •

B 650

B 600

Features : • • • • • • •

FC 1200L Note: Wheel guard is available as optional.

AUTOMOTIVE GARAGE EQUIPMENT

Applicable for cars, trucks and buses. Display: Digital LCD display and LED indicators. 01 Operation: Hand-spin – B600, Motorized spin – B650 Data Input: Manual. Pneumatic lift for effortless lifting and positioning of weights up to 150 kg in weight. 02 Pneumatic brake operated manually for braking the wheel at the end of the cycle and clamping the balancer shaft. 03 Unbalance Unit: Displayed in grams or ounces, rounding setting available for unbalance amount. Ergonomic Design: Weight holder tray and laterally-positioned flange support.

Applicable for cars, trucks and buses. Display: Digital LCD display and LED indicators. Operation: Motorized spin Data Input: Manual. Pneumatic lift for effortless lifting and positioning of weights up to 150 kg in weight. Brake pedal for braking the wheel at the end of the cycle. Ergonomic Design: Weight holder tray and laterallypositioned flange support.

wheel balancer

Features : •

•

• • •

Megaspin 250

The balancer with its lift is fitted on a single chassis. 2 big wheels to weightless move the complete machine. Forget moving heavy tyres; move the balancer to the tyre. The machine works without motor. For the computer and display it is sufficient to use 24 V DC of the truck battery, 12 V DC of other vehicles, or 115/230 V AC. Tyre Lifting At Your Finger Tip. Even the heaviest tyre can be easily lifted by a hand driven, mechanical reduced gear. Also for SUVs and cars. Alloy Programs. The megaspin 250 offers unlimited choices for optimum weight positions for all modern alloy rims. 01

• • • •

AUTO SPLIT. With the new, upgraded function it is even more easy and faster to split weights. 02 MINISTAT. Minimises the residual static unbalance. Residual static unbalance is the cause of many vibration problems. USER 2. Storing the wheel data for alternate operation of two operators on the machine. OPTIMISATION. To compensate the unbalance of tyre and rim.

1.1 WHEEL SERVICING

for Heavy Duty Vehicles with Digital Display

AUTOMOTIVE GARAGE EQUIPMENT

wheel balancer

for Heavy Duty Vehicles with Colour Monitor Display

Features :

1.1 WHEEL SERVICING

• • • • •

• •

B 700 Note: Wheel guard is available as optional.

Applicable for cars, trucks and buses. Display: Colour monitor. 01 Operation: Motorized spin. Data Input: Automatic gauge for wheel distance and diameter measuring. Manual input for wheel width measuring. Pneumatic lift for effortless lifting and positioning of weights up to 200kg in weight. The lift is equipped with safety handle which prevents tipping over of the wheel and simplifies handling operations. 02 Automatic wheel braking at the end of spin. Alu 1P, 2P Programs: These programs are used for max. precision balancing on light aluminium rims that require the application of both weights on the inner side. 03

• • • • •

AUTOMOTIVE GARAGE EQUIPMENT

• • •

Features :

WB 690

•

Computerized electronic wheel balancer for trucks,bus,cars and motorcycle. 17” LCD x VGA monitor and three-dimensional graphics to facilitate imbalance reading and the control of operations. Operator program that allows up to 3 people using the machine at the same time. Personalized preference options for language and machine functions. Self-diagnosis and calibration ensure exceptional accuracy and easy maintenance. Wheel protection guard that allows balancing of 1120 mm (44”)diameter wheel.

Unbalance Unit: Displayed in grams or ounces, rounding setting available for unbalance amount. Multilingual: 13 languages of the machine messages that appear on the monitor can be selected. 04 Customization: Electronic keyboard which allows customization of monitor. 05 Ergonomic Design: Weight holder tray and laterally-positioned flange support.

Finishing Balancer Features : • • • • •

• PRESTIGE

•

Applicable for cars, trucks and buses. Infrared Ray System: Unbalance position detection by means of an infrared ray. Hydraulic coupling for gradually wheel acceleration without damaging the drive motor. Removable control board so that balancing operations can be done from inside the vehicle. Electromagnetic brake to reduce operator braking effort to the maximum. Button operated electromagnetic brake. Brake force is controlled to optimize time and to reduce damage to the tyre wall. 2 speed motor rated at 4.7 kW ideal for gradual wheel acceleration for low r.p.m. wheel balancing. LCD display for perfect visibility even in bright sunlight.

Ref.

Prestige

Power supply

400V 3ph

Motor power

4.7 kW-300rpm

Max. Balancing speed Weight

• • • •

Position Reading: Unbalance position displayed on an easy to read, fully field tested clock system. Sensitivity can be changed manually. Specially contoured drive wheel to improve contact with all types of tyres. Easy Maintenance: The balancer calibrates itself to both wheels individually. Piezoelectric pick-up for cars.

Piezoelectric pick-up for trucks and buses.

Transducer for cars.

Transducer for trucks and buses.

1.1 WHEEL SERVICING

for Cars And Trucks

150 km/h 115kg

Features : • •

Megaspin 388

•

2 Speed system to spin any kind of vehicle at the most suitable speed. High speed for cars and low speed for trucks and busses Automatic sequence for all operations: mark the wheel with reflecting tape, spin the wheel, add the calibration weight on the reference position, spin the wheel again, read the unbalance value, remove the calibration weights, and apply the weights shown on the panel Microprocessor based program with infrared photocell, adjustable in the height: Perfect balancing of even the most critical wheels in 2 spins only.

AUTOMOTIVE GARAGE EQUIPMENT

Accessories

1.1 WHEEL SERVICING

for Wheel Balancers

ARF

GRA/T

DX/CBF

FUC40

GAC47

FUC4/VT

Accessory for centre hole 4WD wheels. From ø 101 to 119 mm. Suitable for models with shaft D. 40 mm.

Complete cone for vans with centre hole wheels. From ø 118 to 173 mm. Suitable for models with shaft D. 40 mm.

Base car accessory for centre hole wheel from ø 47 to 115 mm.

Set of balancing accessories for tucks and buses with central hole from ø 160 to 280 mm.

Universal flange for all wheels with or without central holes. Supplied with wrenches and caliper (Wheels gauge from ø 90 to 210 mm.).

Universal flange for all passenger car and commercial vehicle wheels having 3-4-5-6 holes but no central hole. Supplied complete with wrenches and caliper (wheels gauge from ø 90 to 210 mm).

GAF110

Accessory for centre hole 4WD and light commercial vehicle wheels from ø 110 to 165 mm.

KCT

Set of cones for trucks wheels with centre hole from ø 159 to 281 mm.

AUTOMOTIVE GARAGE EQUIPMENT

MLC

Hand spin handle for FUC 4/VT universal flange.

Accessories

GFR

QuickPlate Kit

Ring nut.

Perfect clamping from the outside for center bores from 95-182mm

GRD46

Duo Expert Kit

Quick ring nut.

1.1 WHEEL SERVICING

for Wheel Balancers

Perfect and tolerance free centering for all rims with a middle hole between 54-78mm

PRC3/V2

Wheel guard complete with support and microswitch.

GBRM

Motorcycle wheel adaptor.

TEQ01

External gauge to acquire the rim width automatically.

ProBike II

Self-centering flange for motorcycle wheels.

AUTOMOTIVE GARAGE EQUIPMENT

Technical data

1.1 WHEEL SERVICING

Wheel Balancer with Digital Display B 215

WB 277 N

B 235

B 245

B 40

Megaspin 400

Power supply

Ref.

230V 1ph

Shaft diameter

40 mm

1 gr.

10” - 28”

8” - 30”

11” - 28”

10” - 28”

10” - 26”

10” - 30”

Readout accuracy Rim diameter Rim width

1.5” - 20”

2” - 20”

1.5” - 20”

Max. wheel diameter

1117 mm

1120 mm

1117 mm

1110 mm

1067 mm 530 mm

Max. wheel width

600 mm

508 mm

600 mm

580 mm

Max. wheel weight

75 kg

70 kg

75 Kg

70 Kg

75 Kg

Weight

75 kg

90 kg

193 kg

145 kg

96 kg

133 kg

Wheel Balancer with Colour Monitor Display Ref.

B 325 A

B 335

B 345 C

WB 680 / 680 P

Megaspin 1000

B 540 C

Megaspin 2000

Power supply

230V 1ph

Shaft diameter

40 mm

1 gr.

Rim diameter

10” - 28”

11” - 28”

10” - 28”

8” - 30”

10” - 30”

11” - 32”

10” - 30”

Rim width

1.5” - 20”

2” - 20”

1.5” - 20”

Max. wheel diameter

1117 mm

1120 mm

1067 mm

1117 mm

1067 mm

Max. wheel width

600 mm

508 mm

530 mm

600 mm

530 mm

Max. wheel weight

75 Kg

80 Kg

75 Kg

198 kg

145 kg

148 / 158 kg

212 kg

245 kg

Readout accuracy

Weight

Wheel Balancer for Heavy Duty Vehicles Ref.

B 600

B 650

FC-1200L

Megaspin 250

B 700

WB 690

Power supply

230V 1ph

230V 1ph, 12/24VDC

230V 1ph

Shaft diameter

46 mm

Readout accuracy

10 gr.

Rim diameter

8” - 28”

13” - 24”

10” - 30”

7” - 30”

12” - 30”

1.5” - 20”

1.5” - 22”

4” - 20”

200 kg

150 kg

250 kg

200 kg

8 - 15 bar

6 - 15 bar

Pneumatic lift capacity

150 kg

200 kg

Weight

133 Kg

146 Kg

248 kg

190 kg

255 kg

200 kg

Rim width Max. wheel weight Pneumatic air supply pressure

AUTOMOTIVE GARAGE EQUIPMENT

SEMI-AUTOMATIC TYRE-CHANGER

1.1 WHEEL SERVICING

with Sidewards Moving Arm

S 109 Bike

S 116

SL 11

Features :

• • •

• • • • •

•

• • •

Suitable for car & motorcycle wheels having rim size from 6” to 24”. Fixed vertical arm. Sidewards moving horizontal arm. Operating arm locking system by handwheel. Equipped with special turntable with 4 motorcycle adapted clamps. Air operated bead breaker. 12mm strong tabletop.

•

• • • •

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Fixed vertical arm. Sidewards moving horizontal arm. Fitting head designed for both standard and low profiled tyre applications. Operating arm locking system by handwheel. Bead-breaker with double effect pneumatic cylinder. 12mm strong tabletop. Tyre inflation by pedal.

•

• •

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Reinforced chassis. Fixed vertical arm. Sidewards moving horizontal arm. Operating arm locking by handwheel. Bead-breaker with double effect pneumatic cylinder. Made in aluminium. 12mm strong tabletop.

Special d e s i gn e d mounting / demounting head provides versatility and performance for even low profiled tyres. Tools is protected in both back and front part to avoid contact with rim.

AUTOMOTIVE GARAGE EQUIPMENT

Automatic Tyre Changer

1.1 WHEEL SERVICING

for Car And Motorcycle Wheels

TAG 1022

SL 22

Features :

Features (SL22& SL22 Pro) :

• • •

• • • • •

•

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Tilting vertical arm with pedal control. Pneumatic locking for operating arm. Bead-breaker with double effect pneumatic cylinder.

•

• •

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Reinforced chassis. Fixed vertical arm. Sidewards moving horizontal arm. Operating arm locking by handwheel. Air operated double effect bead breaker. Made in aluminium. 12mm strong tabletop.

SL22 & SL22 Pro: Special designed mounting / demounting head provides versatility and performance for even low profiled tyres. Tools is protected in both back and front part to avoid contact with rim.

AUTOMOTIVE GARAGE EQUIPMENT

SL 22 Pro SL22 & SL22 Pro: Tyre inflation system by pedal provides easy, reliable and trouble-safe way to inflate tyre on your machine.

SL22 Pro only: HP2 Dual Assist Arm helps working in easy a professional way upon low profiled, Ultra High Performance and Sport tyres and wheel. Fast and intuitive to use, this represents ideal additional support in professional tyre shop’s performance business.

AUTOMATIC TYRE CHANGER Features : • • • • •

TC 525 PG

Suitable for car and motorcycle wheels having rim size from 10” to 23”. 2 speed bidirectional rotation system with hand switch control. Tilting vertical arm with pedal control. Pneumatic locking for operating arm. Bead-breaker with double effect pneumatic cylinder.

1.1 WHEEL SERVICING

for Car And Motorcycle Wheels

TC 522 PG: Inflation device fitted with a fixed control instrument with graduated gauge and pedal control.

TC 525 PG + Technohelp

Features (S 226 & S 226 Pro) : • • • • • • •

S 226

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Reinforced chassis. Fitting head designed for both standard and low profiled tyre applications. Tyre inflation by pedal. Air operated double effect bead breaker. 12mm strong tabletop. Suitable for tubeless tyre bead seating system (Optional).

S 226 Pro

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMATIC TYRE CHANGER

1.1 WHEEL SERVICING

for Car And Motorcycle Wheels

Innovative touchless mounting & demounting device.

TAG 1030

QX, THE LEVERLESS MOUNTING/DEMOUNTING SYSTEM

Features : • • • • • •

•

Suitable for car & motorcycle wheels having rim size from 10” to 24”. Reinforced vertical arm & arm support. Double rotation speed by pedal. Robot Control. Automatic mounting head positioning device. LEVERLESS tyre mounting/demounting system without bead lifting lever. Air operated double effect bead breaker with bead loosening system. During bead loosening operation, when the shovel gets stuck between tyre bead and rim inside face, the system pulls the shovel outside automatically. Tray tool box, build-in inflation gauge equipped with pressure release valve.

Powerful and easy to use, it’s made by a lever, operated by an air cylinder. It’s simple and clear how much is the saving of energy and effort for the operator!!

Pneumatic Bead Pressing Device Pneumatic bead pressing device grants a stress-free wheel handling during tyres demounting/mounting steps. An extremely steady frame and the multi-shapes adjustable pads let the rotating arms press even the most stiff sidewall tyres correctly. Particularly, the mid-position roller helps the loosening of the second bead and the lifting of the lower side of the tyre during demounting process.

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMATIC TYRE CHANGER

1.1 WHEEL SERVICING

for Car And Motorcycle Wheels

S 228

S 228 Pro

Features (S 228 / S 228 Pro / S 228 Pro Duo) : • • • •

• • • • •

S 228 Pro Duo

Tyre inflation by pedal. Adjustable BL shovel angle. Air operated double effect bead breaker. 14mm strong tabletop with adjustable jaws. Suitable for tubeless tyre bead seating system (Optional).

AUTOMOTIVE GARAGE EQUIPMENT

Automatic Tyre Changer for Racing Tyres

1.1 WHEEL SERVICING

Features (S 234 & SX 234) : • • • • • • • • •

S 234

Suitable for car & motorcycle wheels having rim size from 10” to 28”. Reinforced chassis & tower. Double rotation speed by pedal. Fitting head designed for both standard and low profiled tyre applications. Tyre inflation by pedal. SBS system for BL shovel with adjustable angle. Air operated double effect bead breaker. 14mm strong tabletop with adjustable jaws. Suitable for tubeless tyre bead seating system (Optional).

SX 234

ADJUSTABLE JAWS

By sliding the jaws outside, it adds a further 2” extra clamping width. Double guided slides guarantee much longer life to one of the most sensitive parts in the tyre changer.

INFLATION SYSTEM BY PEDAL

Provides a much faster tyre inflation cycle, through the air quick-pumping valve, to save operational time (Optional).

QUADRALOCK DEVICE

Provides additional power to eliminate consequences of mechanical stress on both horizontal arm and operating arm of the tyre changer.

QX, THE LEVERLESS MOUNTING/DEMOUNTING SYSTEM

Powerful and easy to use, it’s made by a lever, operated by an air cylinder. It’s simple and clear how much is the saving of energy and effort for the operator!!

AUTOMOTIVE GARAGE EQUIPMENT

SMART BLADE SYSTEM (SBS)

Eliminates the time consuming and labor intensive combined foot-hand action for the operator, as the SBS system enables you to pre-set the movement and stroke of your bead breaker blade and arm.

SUPERAUTOMATIC TYRE CHANGER

• • •

1.1 WHEEL SERVICING

Features :

Suitable for car and motorcycle wheels having rim size from 10” to 34”. 2 speed bidirectional pedal electric rotation system. Leverless mounting/demounting system.

Crossage Evo

The wheel positioning device, lifts and places the tyre assembly exactly in the right centering position over the clamping chuck, without any effort for the operator. Ergonomic and user-friendly, it is controlled through a pedal installed on the main chassis (Optional).

QX, THE LEVERLESS MOUNTING/DEMOUNTING SYSTEM

Powerful and easy to use, it’s made by a lever, operated by an air cylinder. It’s simple and clear how much is the saving of energy and effort for the operator!!

The pedal box is placed at the side of the main chassis, in order to optimize working space and guarantee the best working position to the operator. All controls, both by hand and by pedal, are extremely easy to reach and work on, from the same working position.

Mounting / dismounting procedures for conventional, low profiled and Run Flat UHP tyres remain exactly the same as those normally performed by the tyre shop. The advantage is to avoid using the traditional tyre bar.

The bead breaker arm with disk helps loosening the bead in a more sensitive, regular and effective way than the traditional bead breaker shovel. Combined use of both disks allows “MATCHING” operation, required in balancing to save weights, without removing the tyre from the rim.

Rim clamping is made through a cone and a quick ring nut.

AUTOMOTIVE GARAGE EQUIPMENT

1.1 WHEEL SERVICING

SUPERAUTOMATIC TYRE CHANGER Features : • • • • TC 555 SL

• • •

Suitable for car wheels having rim size from 10” to 30”. Centre post turntable with adjustable height. Leverless mounting/demounting system. Wheel bead breaking group with double movement penetration. Conventional blade type bead breaker included. Ease of control with ergonomic design. Specially designed to work on all latest generation UHP and run-flat tyres.

Inflating of the tyre clamped and secured on the turntable centre post.

Powerful, accurate and fast. It allows the bead breaking of all UHP and Run Flat tyres

AUTOMOTIVE GARAGE EQUIPMENT

Wheel clamping with centre post turntable system.

Leverless mounting/demounting technology. System with double support to the rim to reduce flexions and tensions on the bead and on the rim edge. It strongly reduces the physical effort by the operator.

Bead breaking group control panel.

SUPERAUTOMATIC TYRE CHANGER

• • • • • •

1.1 WHEEL SERVICING

Features :

Suitable for car wheels having rim size from 10” to 30”. Moveable chuck with 2 height positions, which is essential when working on large sized reversed-well rims. Equipped with lift for heavy wheels. Electro-hydraulic operated bead breaker rollers. Ease of control with ergonomic design. Specially designed tool for mounting/demounting tyre without accidentally damage the surface of aluminium rims.

TC 5000

The movable chuck is a completely new idea and very practical in use. It has two height positions, which is essential when working on large sized reversed-well rims.

The lift is in front of the movable chuck. When it tilts and positions the wheel horizontally, the rim hole is always aligned with the chuck ring. It quickly and effectively solves the problems of heavy wheels.

The location of the pedals and manual controls is convenient, practical, and comfortable for the operator, who does not have to leave the work station.

Bead breaking combines the 2 hydraulic roller arms and the movement of the chuck. The two rollers are useful and required for mounting and demounting tyres.

The tool in precision cast steel is completely coated with a special plastic material in order to avoid any damage in the case of contact with aluminium rims.

AUTOMOTIVE GARAGE EQUIPMENT

UNIVERSAL TYRE CHANGER

1.1 WHEEL SERVICING

for Any Truck & Heavy Duty Wheel

S 551

S 554

Features :

• • • •

• •

•

Suitable for truck and heavy duty wheel with 14” to 56” rim size. 2 speed hydraulic chuck. 5 different rim locking points. Movable control unit. Hand movable tool holder.

•

• • •

FC 26L

S 557

Features :

• • •

• • • • •

•

Suitable for truck and heavy duty wheel with 14” to 26” rim size. Single speed chuck. Equipped with wheel centering hand system by flange and cones. Traditional double tool for mounting/removing tubeless and/or tube tyres. Control cabinet on swinging arm. Hand movable tool holder.

Suitable for truck and heavy duty wheel with 14” to 26” rim size. Single speed chuck. Locking jaws with different gripping possibilities. Universal tool carrier arm with pendulous bead breaking disc and hook. Movable control unit.

AUTOMOTIVE GARAGE EQUIPMENT

•

Suitable for truck and heavy duty wheel with 13” to 27” rim size. 2 speed hydraulic chuck. 5 different rim locking positions. Mobile cable control unit. Mobile control unit. Hand movable tool holder.

UNIVERSAL TYRE CHANGER

1.1 WHEEL SERVICING

for Any Truck & Heavy Duty Wheel

DIDO 30

Features : • •

•

Suitable for truck and heavy duty wheel with 14” to 30” rim size. Self-centering chuck with 4 jaws works in both directions of rotation and it has hydraulic opening and closing with adjustable pressure, assuring a perfect locking. The operating chuck has a fast system making the bead removing and extraction operations remarkably easy.

The hydraulic distribution is equipped with a valve, which regulates the operating pressure of the chuck. The regulation of the pressure allows to also handle all types of aluminum, alloy and any kind of weak or thin rim.

AUTOMOTIVE GARAGE EQUIPMENT

ACCESSORIES

1.1 WHEEL SERVICING

for Tyre-Changers

HELP

Additional pneumatic device for mounting/removing low-profiled tyres.

PRESS ARM

Pneumatic device with 3 point-articulated arm for low-profile tyre.

196/97

Bead pressing lever.

HP2

Dual assist arm.

TECNOHELP

A professional tool that is indispensable for dealing with wide and low profile tyres as well as particularly hard or large sized tyres.

AUTOMOTIVE GARAGE EQUIPMENT

Tubeless Inflation System

Quick inflating device for tubeless tyres with 16 liter tank and inflating nose.

ACCESSORIES

1.1 WHEEL SERVICING

for Tyre-Changers

REVERSE

Locking kit for â&#x20AC;&#x153;reverseâ&#x20AC;? rims; allows locking those rims that, owing to their inner groove position, must be locked on the chuck in reverse position.

Leverless mounting/demounting system. Suitable for conventional, low profiles and run-flat tyres.

229/01

201027

Flange for reversed well rim without central hole.

231/01

Mounting tools quick change device; it gives the possibility of changing the mounting tool in a few seconds.

This kit includes plastic protectors for bead breaker shovel, bead breaking support pad and even for the rim surface itself for a higher operational safety against contact between rim and metal parts which might damage it.

233/01

This kit of plastic protections easily covers the metal surface of the most common parts in contact with the wheel surface, that is clamping jaws, fitting head and tyre lever.

AUTOMOTIVE GARAGE EQUIPMENT

ACCESSORIES

1.1 WHEEL SERVICING

for Tyre-Changers

270/04 195/97

Set of adaptors for motorcycle tyres; it allows an easy locking of motorcycle wheel rims from 6" to 23".

This set of passenger's car wheel clamping adaptors reduces the clamping range of 2". Fixed over tabletops with min. clamping size 12", they enable clamping small 10" car wheels.

267/04 - 269/04 272/04

This set of motorcycle clamping adaptors has an extra height of 25mm. This makes them the best for clamping motorcycle wheels with brake drum assembled, or ATV wheels.

AUTOMOTIVE GARAGE EQUIPMENT

This set passenger's car wheel clamping adaptors increases the clamping range of 4". Easy to fix over original clamping jaws, these adaptors give the chance, on biggest clamping range tabletops, to reach a maximum external clamping up to 28".

Technical Data

Ref.

S 109 Bike

S 116

SL 11

6” - 24”

10” - 24”

Max. wheel diameter

39"

39”

Max. wheel width

9.5"

13”

2500 kg

3140 kg

Rim clamping

Bead-loosener cylinder force at 10 bar Operating Pressure

10 bar

Motor power

0.55 kW

Power supply

230V 1ph 400V 3ph

158 kg

190 kg

185 kg

Net weight

1.1 WHEEL SERVICING

Semi-Automatic Tyre-Changer with Sidewards Moving Arm

Automatic Tyre Changer Ref. Rim clamping

TAG 1022

SL 22 / Pro

TC 525 PG

S 226 / Pro

TAG 1030

S 228 / Pro / Duo

S 234

SX 234

10” - 24”

10” - 25”

10” - 24”

10” - 28”

10” - 26”

Max. wheel diameter

43”

39”

44”

43”

44”

Max. wheel width

14”

15”

16”

15”

13”

15”

16”

3140 kg

2500 kg

3140 kg

10 bar

8 - 12 bar

10 bar

Bead-loosener cylinder force at 10 bar Operating Pressure Motor power

0.55 kW

0.9 - 1.2 kW

0.55 kW

0.8 - 1.1 kW

Power supply

230V 1ph 400V 3ph

220 kg

200 / 280 kg

238 kg

210 / 280 kg

305 kg

272 / 352 / 392 kg

415 kg

386 kg

Net weight

AUTOMOTIVE GARAGE EQUIPMENT

Technical Data

1.1 WHEEL SERVICING

Superautomatic Tyre Changer Ref.

Crossage Evo

TC 555 SL

TC 5000

10” - 34”

10” - 30”

Max. wheel diameter

47”

46”

57”

Max. wheel width

16”

22”

Bead Breaker Force

1227 kg

2500 kg

1400 kg

Rim clamping

Operating pressure (Pneumatic)

8 - 10 bar

8 - 12 bar

Motor power

0.8 - 1.1 kW

0.75 / 0.9 - 1.2 kW

1.0 - 1.4 kW

Power supply

230V 1ph 400V 3ph

425 kg

380 kg

556 kg

Net weight

Universal Tyre Changer for Any Truck & Heavy Duty Wheel Ref.

S 551

S 554

S 557

FC 26L

DIDO 30

14” - 56”

14” - 26”

13” - 27”

14” - 26”

14” - 30”

Max. wheel diameter

90”

47”

63”

64”

Max. wheel width

42”

30 ½”

33"

Max. wheel weight

1500 kg

500kg

1200 kg

Bead Breaker Force

2690 kg

1865 kg

1500 kg

Operating pressure (hydraulic)

0 - 130 bar

Chuck motor

1.3 - 1.8 kW 400V 3ph

1.1 kW 400V 3ph

1.3 - 1.8 kW 400V 3ph

1.5 kW 400V 3ph

1.1 kW 400V 3ph

0.75 kW 400V 3ph

1.1 kW 400V 3ph

1.5 kW 400V 3ph

770 kg

400 kg

560 kg

518 kg

605 kg

Locking range

Hydraulic pump motor Net weight

AUTOMOTIVE GARAGE EQUIPMENT

TECHNICAL REVIEW Is nitrogen inflation new?

What’s the harm in that?

It’s been used on giant off-highway tyres, on aircraft tyres, and on racing tyres for many years.

Water vapor in compressed air acts as a catalyst, accelerating rust and corrosion. Water vapor also absorbs and holds heat. And, when it changes from liquid to vapor, water expands tremendously in volume. So, tyres inflated with wet air tend to run hotter and fluctuate in pressure more. That’s why racing tyres, where fractions of a psi can radically change handling, are inflated with dry nitrogen.

Why did they switch? Air is about one-fifth oxygen, and oxygen, especially at high temperatures and pressures, is a very reactive element. When oxygen reacts with things, the process is called oxidation. When oxidation is extremely rapid, the process is called “burning.”

Where would we get nitrogen?

That’s one reason nitrogen is used in off-highway and aircraft tyres. These tyres run so hot they can actually catch on fire. Nitrogen doesn’t support combustion, so nitrogen-filled tyres don’t add fuel to the flames. And, nitrogen helps prevent slower forms of oxidation too.

Some people use high pressure cylinders or big containers of liquid nitrogen as their source, but several companies now offer machines that separate nitrogen from air. These machines can produce nitrogen that’s 95 percent or more pure, taking it from the inexhaustible supply in the air around us.

What are those?

What do we do when we’re out on the road?

Oxygen corrodes aluminum and steel wheels. And, oxygen reacts with rubber, in a sense, “corroding” it too. Rust and dust from wheels can clog valve stems, causing them to leak. And, rough surfaces on wheel flanges and tyre beads may not seal properly, causing additional leaks. Oxygen also ages the innerliner, that thin layer of rubber inside the tyre whose function is keeping air away from the carcass. As the innerliner ages, more and more air molecules can pass through it, causing more pressure losses.

With nitrogen inflation, you won’t need to “top off” your tyres nearly as often – or as much. And, if you do need to add pressure, the little bit of air that you might put in will have very little effect. If you have nitrogen inflation capability at “home”, when trucks come in, you can let the air out of their tyres and re-inflate them with nearpure nitrogen. That will bring the concentration of nitrogen inside your tyres back to optimum levels.

How does that happen? Air migrates through rubber. Truck tyres can lose 2 psi per month as a result of air passing through their sidewalls – like a balloon that shrivels up, but much slower. That’s why regular inflation pressure checks are a must. Even if there’s nothing “wrong,” you can still be losing pressure. And, when oxygen passes through rubber, it can come into contact with steel cords, causing them to rust too.

Because air can migrate through sidewalls, truck tyres can lose up to 2 psi per month.

1.1 WHEEL SERVICING

WHY SHOULD WE INFLATE TYRES WITH NITROGEN?

Is nitrogen inflation cost-effective? That’s going to depend on your situation. If your trailers go out and don’t come back for 6 months or more, being able to keep consistent inflation pressures may greatly lengthen tread life. Some tests have shown increases of up to 26 percent. Less rubber aging and tyre cord rust could also yield a higher proportion of retreadable casings – and casings that can survive more retread cycles. That cuts cost per mile too. There’s nothing you can do that is better for your tyres than maintaining the right inflation pressure – all the time. Nitrogen could help you do that.

How does nitrogen help? While both nitrogen and oxygen can permeate rubber, nitrogen does it much more slowly. It might take 6 months to lose 2 psi with nitrogen, compared to just a month with air. And, nitrogen is far less reactive. It doesn’t cause rust and corrosion on steel or aluminum, and it doesn’t degrade rubber. Wheel surfaces stay smooth and clean, rubber remains supple and resilient. Inflation losses are minimized.

Small bits of corrosion from wheels can prevent valves from seating properly, leading to loss of air pressure.

Are there other benefits to nitrogen inflation? The air around us is full of water vapor. It’s called “humidity.” Compressing air concentrates the water in it. Draining water from your air lines every day helps, but unless you have a really efficient air dryer, chances are there’s lots of water in your compressed air.

When you compress air, it takes up much less volume, but the percentage of water by volume is greatly increased.

AUTOMOTIVE GARAGE EQUIPMENT

1.1 WHEEL SERVICING

Nitrogen gas inflator

Features : • • •

High Purity Nitrogen 95 - 99.5% Nitrogen with Intelligent Tyre Inflator for Automobiles Reading Accuracy ±1 psi.

Optional

NR 1000AF

N2 / N6

NEX2I / NEX6I / NEXMI

Benefits of Nitrogen Inflation ▪▪ Less inflation pressure loss. ▪▪ Less inflation pressure fluctuation with heat. ▪▪ Reduced wheel corrosion. ▪▪ Longer tread life.

Ref.

NR 1000AF

Kind of application

Nitrogen gas tank

NEXMI

NEX2I

NEX6I

Car, Light Truck

Input compress pressure

12 bar

10 bar

12 bar

Nitrogen gas purity

±95%

Purity adjust mode

Output flow adjust purity method

Power voltage (for AutoFill) Output nitrogen pressure Nitrogen gas generates Weight

Bus, Truck

220V 1ph 10 bar

10 bar

5.5 bar

6.2 bar

10 bar

346 l/min

580 l/min

380 l/min

60 l/min

70 l/min

200 l/min

110 kg

130 kg

211 kg

136 kg

155 kg

248 kg

AUTOMOTIVE GARAGE EQUIPMENT

technical review SOLVING THE PROBLEMS OF YOUR BRAKE SYSTEM

1.1 WHEEL SERVICING

Examples of disc problems

What leads to Brake Juddering? Rotor run-out is often caused by debris being caught between the new rotor and the old wheel hub, or by improperly torqued the wheels, which can bend the hub, rotor and wheel. There is always a chance that excessive heat built up from heavy braking without sufficient time for the system components to cool down. Rotor run-out can be measured by using a dial indicator, typically it should not exceed 0.01cm. Rotor thickness variation is a condition that the two sides of the rotor not being parallel to each other. This can be caused by uneven wear, crushing of rotors by the brake, or simply developed over time from a combination of forces. This problem is normally felt in the brake pedal by its pushing back with a rhythm consistent with the current wheel speed.

Run - out

Thickness Variation

Roughness

Car A : Replaced brake pads but without brake disc lathed.

Brake Disc

Mounting Plate Knuckle

Brake Lathe Calliper

Car B : Replaced brake pads and done brake disc lathed.

Brake Pad

20M Normal load of car Pedal force : 150N Speed : 120km/h -> 0km/h

AUTOMOTIVE GARAGE EQUIPMENT

1.1 WHEEL SERVICING

Brake lathe Features :

Features :

• •

• • • •

•

DBL 3000

AUTOMOTIVE GARAGE EQUIPMENT

Accumulated technical skill on lathe allows fast & precise work. Automatic / manual dial. Simple & easy control box. Inverter installed (0-120 rpm) Infinite drive transfer handle.

DBL 4500

Features :

• •

• • •

•

DBL 4000

•

Accumulated technical skill on lathe allows fast & precise work. Adjustable height. Simple & easy control box.

•

Accumulated technical skill on lathe allows fast & precise work. Limit switch. Automatic / manual dial.

DBL STAR(B)

Accumulated technical skill on lathe allows fast & precise work. High precision machine. Limit switch & V bed. Safety Cover.

Brake lathe Features: •

•

Solid precision tool for the refacing of brake discs on cars. M o u nte d dire c tl y o nto th e c ar, where the brake caliper is removed. With this very direct mounting, it is possible to reface the discs of nearly all passenger cars and light commercial vehicles. Stable design and direct mounting on the fastening points of brake caliper, it is even possible to correct brake discs of new cars.

1.1 WHEEL SERVICING

•

9092

AUTOMOTIVE GARAGE EQUIPMENT

Rim Press Machine

1.1 WHEEL SERVICING

Features : • •

Designed for straightening rim having sizes from 10” to 24”. Applicable for alloy and steel rims.

BASIC

Optional DORUK

Features :

• • •

Designed for straightening rim having sizes from 10” to 28”. Applicable for alloy and steel rims. Lathe apparatus lathes damaged edges of the rims after straightening process. (Optional) Standard lathe support

AUTOMOTIVE GARAGE EQUIPMENT

Turn table lathe support

Motorcycle flange kit

AUTOMOTIVE GARAGE EQUIPMENT

LIFTING EQUIPMENT

1.2 54

Motorcycle lift Features :

1.2 LIFTING EQUIPMENT

• • •

• •

Designed to improve work conditions on motorbikes and mopeds. Commanded with a button/lever control or pedal. Manual front wheel clamp, consist of two jaws, with a hand wheel adjustment, that slides along runners on the raising platform. It can be positioned along the raising platform, is a great advantage to blocking the front wheel in the optimal position. Side extension, operate on vehicles having 3/4 wheels as city cars, quads and gardening machines. (Optional) Pneumo-hydraulic scissors type lift for lifting motorcycles and scooter up to a maximum height of 1000 mm.

Ref.

Superlift 600 Bike M

Power supply

400V 3ph

Motor power

0.75 kW

Max. capacity

Superlift 600 Bike M

600 kg

Working pressure

8 - 10 bar

Weight

256 kg

Optional Accessories

Side Support For Stand

AUTOMOTIVE GARAGE EQUIPMENT

Additional Lift - 300 kg capacity

Oil Tray

Motorcycle lift Features :

Lifting system with pneumatic or manual system. Complete with uniquely design ramp. Manual front wheel clamp. Equipped with mechanical safety devices.

Ref.

EE-MCL1000

Lifting capacity

EE-MCL1000

453 kg

Min. height

185 mm

Max. height

825 mm

Weight

235 kg

1.2 LIFTING EQUIPMENT

• • • •

AUTOMOTIVE LIFT Single Post Type

Features : • • • • • • •

2,500 kg lifting capacity. Space saving single post structure. The concept of mobile column makes lift flexible, you may move the lift to wherever you want. (EE-612E only) One button to operate. 24V control system against unexpected hurt or injury caused by electricity leakage. Aluminium motor prevents overheating. Anti-surge valve that equipped in hydraulic joint ensures no danger in case of oil hose broken.

• • •

Each of the four lifting arms can be easily extended and rotated, convenient to find picking up point of different vehicle. Round screw-up lifting pad adapts to chassis with various height. Particularly designed protection cloth brings the lift as a whole in appearance.

EE-612E EE-612FE

Ref.

EE-612E

EE-612FE

Capacity

2500 kg

Min. Height

110 mm

95 mm

Motor power

2.2 kW

230V 1ph 415V 3ph

Lifting speed

35 sec.

Weight

810 kg

780 kg

Voltage

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT 2 Post Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • •

2 post clear floor type lift (4 ton). Ratchet arm for quick 6 different height adjustment. 4WD/Light Truck adaptor kit. (Optional) Twin dual packing hydraulic pistons for ultimate reliability. Automatic arm locking device. Cable Remote control. (Optional) Direct lowering button. Padded roof protection bar with cut off switch.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Cable Remote Control.

SL 2900FR

Features : • • • • • • • •

SL 2900F

AUTOMOTIVE GARAGE EQUIPMENT

2 post clear floor type lift (4 ton). Telescope double stage pick up pads. 4WD/Light Truck adaptor kit. (Optional) Twin dual packing hydraulic pistons for ultimate reliability. Automatic arm locking device. Cable Remote control. (Optional) Direct lowering button. Padded roof protection bar with cut off switch.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Cable Remote Control.

AUTOMOTIVE LIFT 2 post Type

• • • • • • •

2 post clear floor type lift (4 ton). One point release and descending using sensor of both side post. Telescope double stage pick up pads. 4WD/Light Truck adaptor kit. (Optional) Twin dual packing hydraulic piston for ultimate reliability. Automatic arm locking device. Padded roof protection bar with cut off switch.

Optional Accessories

4WD/Light Truck Adaptor Kit.

1.2 LIFTING EQUIPMENT

Features :

SL 2900M

Features : • • • • •

2 post clear floor type lift (4 ton & 3.8 ton). Manual release and descending on both side. Twin dual packing hydraulic piston for ultimate reliability. Automatic arm locking device. Padded roof protection bar with cut off switch.

EE-6214 EE-38L

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT 2 post Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • • •

2 post clear floor type lift (5 ton). Telescope double stage pick up pads. 4WD/Light Truck adaptor kit. (Optional) Twin dual packing hydraulic piston for ultimate reliability. Automatic arm locking device. Cable Remote control. (Optional) Direct lowering button. Padded roof protection bar with cut off switch. High vehicle possibility.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Cable Remote Control.

SL 25TF

Features : • • • • • •

P2C 232 HCT

AUTOMOTIVE GARAGE EQUIPMENT

2 post electro-hydraulic lift (3.2 ton). 3-section low-profile lifting arms. Steel rope mode synchronisation system of carriages. Two independent cylinders. Low ground cover. Also available with adjustable overhead pipes.

AUTOMOTIVE LIFT 2 Post Type

• • • • • • • • • •

2 post base type lift (4 ton). Telescope double stage pick up pads. 4WD/Light Truck adaptor kit. (Optional) Twin dual packing hydraulic piston for ultimate reliability. Automatic arm locking device. Cable Remote control. (Optional) Direct lowering button. Fitness in the low ceiling. Low base cover. General arm application.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Cable Remote Control.

1.2 LIFTING EQUIPMENT

Features :

SL 2500BP

Features : • • • • • • •

2 post base type lift (3.2 ton & 3.8 ton). Triple telescope bent arm. Twin dual packing hydraulic piston for ultimate reliability. Automatic arm locking device. Fitness in the low ceiling. Low base cover. General arm application.

EE-6253 EE-38D

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT 4 Post Type

Features : • • 1.2 LIFTING EQUIPMENT

• • •

4 post type lift (4 ton). 2 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. Perfectly free auto electrical safety locking. 6 buttons cable remote control. (Optional) Adopted twin wire ropes.

Bridging Jack

SL 3500W

Features : • • • • • • • EE-6435S.48L

•

Optional Accessories

AUTOMOTIVE GARAGE EQUIPMENT

Electrical release system. 180 mm minimum height low profile runway design. Adjustable distance between platforms, well applicable to vehicles of different width. 24V ABS control box and limit switch consider your safety operation. Aluminium motor prevents overheating caused by long time working. The mechanical lock engaged automatically in lifting process. Valid protection system for broken steel cable or oil hose and low height alarming buzzer brings your attention to safety operation. Reserved hand pump joint on hydraulic block for emergency lowering.

AUTOMOTIVE LIFT 4 Post Type

• • • • • • • •

4 post type lift (4 ton). Auto level locking position for wheel alignment. Wider recess for adoption of universal turn-tables. Lockable rear side slip plates. 2 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. Flush level rear slip plates. Cut-off for front turn-tables. 6 buttons cable remote control. (Optional)

Optional Accessories

Bridging Jack

1.2 LIFTING EQUIPMENT

Features :

SL 3600A

Features : • • • • • • • • P4C 440B Runways have been designed in order to check and adjust the wheel alignment of vehicles, with front turntable housing and rear oscillating platform. Front wheel stops and hang ramps, supplied as standard.

4 post type lift (4 ton). Auto level locking position for wheel alignment. Wider recess for adoption of universal turn-tables. Lockable rear side slip plates. 2 tons capacity pneumo-hydraulic bridging jack. (Optional) Buzzer. Included for safety alert. Mechanical safety racks for platforms stationing. Protection sheets for lifting cables pulleys.

Optional Accessories

Bridging Jack

Emergency descent in the presence of electric/pneumatic energy, by means of a button (yellow) internal to the electric control unit. Emergency descent in the absence of electric power supply, by means of a hand pump (as standard). Min. & max. height limit switch.

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT 4 Post Type

Features : •

1.2 LIFTING EQUIPMENT

• • •

6 ton 4-post lift for commercial vehicle. 3 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. Perfectly free auto electrical safety locking. 6 buttons cable remote control included. (Optional)

Optional Accessories

Bridging Jack

SL 6000

Features : • • • • • • SL 8000 SL 12000

AUTOMOTIVE GARAGE EQUIPMENT

• •

8 ton and 12 ton 4-post lift for commercial vehicle. Auto level locking position for wheel alignment. Double safety devices make perfect working condition. Engineering plastic carriage guide. Perfect free auto electrical safety locking. 3 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. 6 buttons cable remote control included. (Optional) Adopted twin wire ropes.

Optional Accessories

Bridging Jack

AUTOMOTIVE LIFT 4 Post Type

Features : • • •

12 ton 4-post lift for commercial vehicle. This innovative lift has a hydraulic cylinder in every post. Electrically synchronized through the use of potentiometers linked to a micro-processor that precisely monitors parallel lifting of the two runways. Available runway lengths in 15’, 20’, and 26’. Space between the runways is adjustable with minimum of 31” up to a maximum of 65”.

1.2 LIFTING EQUIPMENT

• •

ST 4120

Features : • • • • • •

12 ton and 16 ton 4-post lift. Large lifting capacity to load big trucks. 24V low voltage control. Electrical pneumatic release. With antiknock valve and safety valve. Imported hydraulic and electrical component.

12.0F 16.0F

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT 4 Post Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • •

25 ton 4-post lift for commercial vehicle. Auto level locking position for wheel alignment. Double safety devices make perfect working condition. Engineering plastic carriage guide. Automatic electrical locking system. 12 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. 6 buttons cable remote control included. (Optional) Adopted quadruple wire ropes.

SL 25000

Features : • • • • • • •

ST 4250

AUTOMOTIVE GARAGE EQUIPMENT

24.5 ton 4-post lift. Free of crossbeams. Wide runways with extremely low drive-on height. Well-positioned control panel make controlling the lift easy and safe. Entirely electronically controlled. The LCD screen can also be used to display system information. Independent mechanical locking mechanism system is always active.

AUTOMOTIVE LIFT Column Type

Features : • • •

6 ton column capacity. Extra long pick-up fork length of 14” for super-single tyres. 2 control options are available: Conventional: allows operation of up to four columns from one single control panel. Paired, individual and group operation is controlled from one location. Reduction sleeves allows lifting of tyres from R12 to 22.5

1.2 LIFTING EQUIPMENT

• •

ST 1060

Model

ST 1060

Lifting capacity

6,000 kg

Lifting. height

1,752 mm

Lifting time

70 sec.

Weight

435 kg

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT Column Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • • • • ML 4030

7,500 kg lifting capacity per column. Each column is equipped with it’s own control system, applies to four,or six, or eight columns per set. A switch on the master control box for single, double, four or all columns operation. The hydraulic electric system provides safe and accurate real time control. With up-to-date technology, SCM control system ensures the lifts’ synchronization. Double safety system: mechanical lock and hydraulic check valve. Fixed wheel supports or optional adjustable ones at your choice. Mobile and flexible, the system can be used indoor or outdoor. Waterproof design for use in commercial washbays. Requires only a flat, stable floor and a power source, no installation cost. With optional axle stands, you can save money & repair more than one vehicle at a time.

Adjustable wheel supports accommodate wheel sizes from 11” to 23” (280~580mm).

AUTOMOTIVE GARAGE EQUIPMENT

Your choice of fixed wheel supports.

LCD screen on master control box (optional)

AUTOMOTIVE LIFT Scissor Type

• • • • • • • • • •

3 ton maximum lifting capacity. Low profile (100mm) scissor lift. Double scissor action. 4 cylinder synchronization. Wider scissor span when fully extended. 1,850mm maximum lift height. Greater balance under load. Cable Remote control. (Optional) Drive-through both side. Safety locking - Gear Type

1.2 LIFTING EQUIPMENT

Features :

SL 10LX

Optional Accessories

Cable Remote Control.

4WD/Light Truck Adaptor Kit.

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT Scissor Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • •

3.3 ton maximum lifting capacity. Double scissor action. 4 cylinder synchronization. Wider scissor span when fully extended. Greater balance under load. 2.1m maximum lifting height. Higher performance. Cable Remote control. (Optional)

Optional Accessories

Cable Remote Control.

SL 34DX

Features : • • • • • •

EE-6503

AUTOMOTIVE GARAGE EQUIPMENT

3 ton maximum lifting capacity. Double scissor action. Mechanical safety locking with automatic engagement and pneumatic release. Extensible platform extension design. 24V control system and lowering alarm all the way against unexpected hurt or injury. Double oil cylinder structure allows much easier leveling operation.

4WD/Light Truck Adaptor Kit.

AUTOMOTIVE LIFT Scissor Type

• • • •

3 ton maximum lifting capacity. Low-profile (180mm) scissor lift. Multi stage electric safety. Cable Remote control. (Optional)

Optional Accessories

Cable Remote Control.

4WD/Light Truck Adaptor Kit.

1.2 LIFTING EQUIPMENT

Features :

SL 3400L

Features : • • • • •

3 ton maximum lifting capacity. Runway Alignment Device: the double torsion bar included in the frame grants the alignment of the two runways never exceeding 50 mm. Hydraulic Safety Device: a counterbalancing valve placed at the outlet of the lifting cylinder. Mechanical Safety Device: a steady hook and a rack, stop the descent of the lift (within a range of 100 mm.) in the event of breaking or bursting the hydraulic hoses. Anti-Crushing Device: In on-floor versions, a protection prevents the foot from being too close. In the flush version, a buzzer sounds to warn of the crushing hazard.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Superlift 30-1B

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT Scissor Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • • • • EE-6501

• •

3.2 ton maximum lifting capacity. Low profile design. No cross beam or torsion bars between two platforms. Connection rod on one each side makes lift no swaying. Pneumatic mechanical lock automatically engaged when finger leaves up/down button. Extendable drive on ramps can be use as additional platforms for accommodating long base vehicles. All pivot joints made with self-lubrication bushing for long time use. Anti-surge valve prevents sudden lowering in case hydraulic hose broken. Alarm buzzes all the way down to ground for safety concern. Aluminium shell motor with fan prevent overheated. Low voltage controls.

Features : • • • • • •

EE-MR30

AUTOMOTIVE GARAGE EQUIPMENT

3 ton maximum lifting capacity. Ideal choice for quick tyre replacement and simple service alongside of vehicle. Surface mounted or mobile use with optional mobile kit. Extensible platform extension design. Anti-skid platform effectively prevents drop-down of vehicle. 24V control system and lowering alarm all the way against unexpected hurt or injury.

AUTOMOTIVE LIFT Scissor Type

• •

•

3 ton maximum lifting capacity. Extremely versatile, sturdy and reliable piece of equipment, it is perfect for demounting and mounting tyres and shock absorbers, for replacing brake pads and engine oil, for body repairs, etc. Low profile (115 mm).

Optional Accessories

4WD/Light Truck Adaptor Kit.

1.2 LIFTING EQUIPMENT

Features :

Superlift 30-2BX

Features : • •

•

3.5 ton maximum lifting capacity. Extremely versatile, sturdy and reliable piece of equipment, it is perfect for demounting and mounting tyres and shock absorbers, for replacing brake pads and engine oil, for body repairs, etc. It is the typical flush installation version. Avoids limitations and obstacles to the operator.

Optional Accessories

4WD/Light Truck Adaptor Kit.

Superlift 35-2S

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT Scissor Type

Features :

1.2 LIFTING EQUIPMENT

• • • • • • •

4 ton maximum lifting capacity. Accommodates wide range of vehicles. Width adjustable turn table recess. Lockable rear side slip plates. 2 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. 6 buttons cable remote control. (Optional) 4 cylinder hydraulic synchronization for maximum power & stability.

Optional Accessories

Bridging Jack

SL 4400X On Ground

Features : • • • • • • •

SL 4400X In Ground

AUTOMOTIVE GARAGE EQUIPMENT

Optional Accessories

Bridging Jack

AUTOMOTIVE LIFT Scissor Type

Features : • • • •

4.2 ton maximum lifting capacity. Fit for 4-wheel alignment (B series), body service and chassis checking. Adjustable turntable position adapts to more types of vehicle. Mechanical safety locking with automatic engagement and pneumatic release. 24V control system and lowering alarm all the way against unexpected hurt or injury. Its central jack, with a max. of 450mm lifting height, is extensible for longer vehicles.

1.2 LIFTING EQUIPMENT

• •

EE-6603

Features : • • • • • • • •

4 ton maximum lifting capacity. Low profile 180 mm min. height. Ideal for 4-wheel alignment, body service and other repair work. Its central jack for type B, with a max. of 450 mm lifting height, is extensible for longer vehicles. Single platform leveling system makes leveling operation easier. With high quality anti-surge valve and Italian ball valve. Mechanical safety locking with automatic engagement and pneumatic release. 24V control system and lowering alarm all the way against unexpected hurt or injury.

EE-6604

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE LIFT Scissor Type

1.2 LIFTING EQUIPMENT

Features : • • • • • • • • • •

4.5 ton maximum lifting capacity. Accommodates wide range of vehicles. Width adjustable turn table recess. 4 cylinder synchronization for maximum power & stability. Lockable rear side slip plates. 2 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. 6 buttons cable remote control. (Optional) Safety locking - Gear type. Easy adjusting synchronization. Using manual valve.

Bridging Jack

SL 5500X

Features : • • • • • • • • • • SL 6600X

Optional Accessories

AUTOMOTIVE GARAGE EQUIPMENT

6 ton maximum lifting capacity. Accommodates wide range of vehicles. Width adjustable turn table recess. 4 cylinder synchronization for maximum power & stability. Lockable rear side slip plates. 3 tons capacity bridging jack. (Optional) Individual control switch on each bridging jack. 6 buttons cable remote control. (Optional) Safety locking - Gear type. Easy adjusting synchronization. Using manual valve.

Optional Accessories

Bridging Jack

AUTOMOTIVE LIFT Platform Type

• • • • • •

2.5 ton lifting capacity. Possibility of installing 4 additional arms with reversible load positioning. Automatic lock of the additional arms. Man-operated control. Overload valve. Safety device in lowering phase. Self-engaging mechanical racks for fall preventing with pneumatic release.

Model

S 252

Lifting capacity

2,500 kg

Min. height

110 mm

Max. height

500 mm

Operating pressure Weight

1.2 LIFTING EQUIPMENT

Features :

7 bar 435 kg

AUTOMOTIVE GARAGE EQUIPMENT

Technical data 2 Post Type Ref. Capacity

1.2 LIFTING EQUIPMENT

Max. height

SL 2900F

SL 2900M

EE-6214

EE-38L

4,000 kg

3,800 kg

1,850 - 1,940 mm

1,900 - 1,990 mm

Drive thru clearance

2,855 mm

2,568 mm

2,556 mm

Overall width

3,395 mm

3,420 mm

Overall height

3,750 mm

3,882 mm

Lifting speed

40 - 50 sec.

50 - 55 sec.

Lowering speed

35 - 45 sec.

Voltage

230V 1ph 400V 3ph

230V 1ph 415V 3ph

Weight

685 kg

Ref.

SL 25TF

P2C 232 HCT

SL 2500BP

EE-6253

EE-38D

Capacity

5,000 kg

3,200 kg

3,000 kg

3,200 kg

3,800 kg

1,880 - 1,940 mm

1,984 - 2,030 mm

1,850 -1,930 mm

1,900 -1,990 mm

Drive thru clearance

2,910 mm

2,600 mm

2,870 mm

2,568 mm

Overall width

3,510 mm

2,940 mm

3,270 mm

3,420 mm

Overall height

4,450 mm

2,575 mm

2,795 mm

2,910 mm

2,827 mm

Lifting speed

40 - 50 sec.

25 - 35 sec.

40 - 50 sec.

50 - 55 sec.

Lowering speed

30 - 40 sec.

Voltage

230V 1ph 400V 3ph

230V 1ph 415V 3ph

Weight

875 kg

825 kg

Max. height

SL 2900FR

AUTOMOTIVE GARAGE EQUIPMENT

Technical data

Ref. Capacity Max. height

Main

SL 3500W

EE-6435S.48L

SL 3600A

P4C 440B

SL 6000

SL 8000

4,000 kg

6,000 kg

8,000 kg

Jack

2,000 kg

3,000 kg

Main

1,750 mm

1,830 mm

1,750 mm

1,850 mm

1,750 mm

1,820 mm

455 mm

380 mm

455 mm

Drive thru clearance

2,735 mm

2,850 mm

2,735 mm

2,740 mm

2,985 mm

3,160 mm

Overall width

3,370 mm

3,310 mm

3,370 mm

3,080 mm

3,618 mm

3,796 mm

Overall length

5,350 mm

5,948 mm

6,116 mm

6,120 mm

6,955 mm

7,630 mm

Overall height

2,215 mm

2,338 mm

2,215 mm

2,472 mm

2,215 mm

2,160 mm

Main

35 - 50 sec.

60 sec.

45 - 55 sec.

Jack

10 - 20 sec.

10 - 15 sec.

Main

35 - 45 sec.

50 sec.

35 - 45 sec.

Jack

5 - 15 sec.

230V 1ph 400V 3ph

230V 1ph 415V 3ph

230V 1ph 400V 3ph

Lifting speed Lowering speed

Jack

Voltage Weight

1,270 kg

1,650 kg

1,700 kg

1,800 kg

Ref.

SL 12000

ST 4120

12.0F

16.0F

SL 25000

ST 4250

Main

12,000 kg

16,000 kg

25,000 kg

24,494 kg

Jack

6,000 kg

12,000 kg

Main

1,820 mm

1,880 mm

1,830 mm

1,820 mm

1,905 mm

Capacity Max. height

455 mm

426 mm

Drive thru clearance

3,450 mm

3,099 mm

3,592 mm

3,414 mm

3,226 mm

Overall width

4,086 mm

3,486 mm

4,092 mm

4,264 mm

3,949 mm

Overall length

9,653 mm

9,455 mm

7,850 mm

9,500 mm

9,300 mm

9,773 mm

Overall height

2,160 mm

2,645 mm

2,215 mm

3,620 mm

Main

45 - 55 sec.

80 - 90 sec.

72 - 82 sec.

Jack

10 - 15 sec.

15 - 25 sec.

Main

35 - 45 sec.

Jack

5 - 15 sec.

Voltage

230V 1ph 400V 3ph

400V 3ph

230V 1ph 400V 3ph

400V 3ph

Weight

Lifting speed Lowering speed

Jack

AUTOMOTIVE GARAGE EQUIPMENT

1.2 LIFTING EQUIPMENT

4 Post Type

Technical data Scissor Type Ref.

1.2 LIFTING EQUIPMENT

Capacity Max. height Min. adapt height

SL 10LX

SL 34DX

EE-6503

SL 3400L

Superlift 30-1B

EE-6501

EE-MR30

Superlift 30-2BX

Main

3,000 kg

3,300 kg

3,000 kg

3,200 kg

3,000 kg

Jack

Main

1,850 mm

1,800 mm

1,000 mm

1,900 mm

1,000 mm

1,900 mm

Jack

Main

100 mm

0 mm

180 mm

105 mm

100 mm

105 mm

Jack

Overall width Overall length

1,975 mm

1,950 mm

2,000 mm

2,164 mm

2,150 mm

1,955 mm

1,970 mm

2,000 mm

1,550 - 1,950 mm

3,920 mm

1,950 mm

2,028 mm

1,950 mm

Main

35 - 45 sec.

45 - 55 sec.

40 - 50 sec.

18 sec.

45 - 55 sec.

25 - 35 sec.

35 sec.

Jack

Main

30 - 40 sec.

Jack

Voltage

230V 1ph 400V 3ph

230V 1ph 415V 3ph

230V 1ph 400V 3ph

400V 3ph

230V 1ph 415V 3ph

400V 3ph

Weight

923 kg

985 kg

798 kg

1,000 kg

440 kg

900 kg

500 kg

730 kg

Superlift 35-2S

SL 4400X (On ground)

SL 4400X (In ground)

EE-6603

EE-6604

SL 5500X

SL 6600X

Main

3,500 kg

4,000 kg

4,200 kg

4,000 kg

4,500 kg

6,000 kg

Jack

2,000 kg

3,000 kg

Main

2,065 mm

1,912 mm

1,620 mm

1,680 mm

1,800 mm

1,950 mm

2,000 mm

Jack

455 mm

450 mm

400 mm

455 mm

Main

268 mm

302 mm

0 mm

180 mm

290 mm

300 mm

Jack

235 mm

-67 mm

0 mm

235 mm

1,900 mm

1,990 mm

2,070 mm

2,220 mm

2,060 mm

2,250 mm

Lifting speed Lowering speed

Ref. Capacity Max. height Min. adapt height Overall width Overall length

2,000 mm

5,702 mm

4,535 mm

4,442 mm

5,305 mm

5,950 mm

6,700 mm

Main

35 sec.

55 - 60 sec.

45 - 55 sec.

Jack

5 - 15 sec.

Main

35 - 45 sec.

Jack

10 - 30 sec.

Voltage

400V 3ph

230V 1ph 400V 3ph

230V 1ph 415V 3ph

230V 1ph 400V 3ph

400V 3ph

Weight

850 kg

2,113 kg

2,003 kg

3,000 kg

3,169 kg

Lifting speed Lowering speed

2,030 mm

AUTOMOTIVE GARAGE EQUIPMENT

LUBRICATION TECHNOLOGY

1.3 80

100

107

101

107

102

106

Pneumatic brake oil extractor Features (10207/10805) : • •

1.3 LUBRICATION TECHNOLOGY

•

10207

10805

4 1 2

1 2

The brake-bleeding device is equipped with an elastic inner membrane (3) which hermetically separates the oil contained in the oil tank (1), from the air contained in the air “expansion” tank (2), thus avoiding the risk of emulsion (working pressure 1 - 2 bar controllable on the upper pressure gauge). The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase.

The brake-bleeding device is equipped with an elastic inner membrane (2) which hermetically separates the oil contained in the oil tank (1), from the air contained in the air “expansion” tank (5), thus avoiding the risk of emulsion. It is also equipped with a third air reserve tank (high pressure air 8-10 bar) (6) which, delivered by means of a pressure regulator (3), enables several bleeding operations to be carried out at a constant pressure without having to recharge the device. The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase. Ref. Capacity

AUTOMOTIVE GARAGE EQUIPMENT

Suitable for bleeding the hydraulic brakes and clutches of all motors vehicles. Brake-bleeding device is equipped with an elastic inner membrane which hermetically separate the oil from the air, thus avoiding the risk of emulsion. Suitable for systems with braking control and ABS (max. at 1 bar).

10207

10805

Max. working pressure

2 bar

Reserve tank max. pressure

2 bar

10 bar

Length of delivery hose

Pneumatic brake oil extractor Features : •

1.3 LUBRICATION TECHNOLOGY

• • • •

Innovative design enables manual & pneumatic oil extracting, automatically alternated. Open & close the red valve to control the extraction. Easy to operate & carry. Portable. Excellent quality.

HA-168

Features : • • • • •

Suitable for all motors vehicles. Easy to carry & operation. Bleeding can be carried out in a few minutes by just one person. Fixing valve & safety cup for automatic cut-off extractor. 1m silicon hose with universal rubber adaptor.

QS-2116 Ref.

QS-2116

Capacity

2000 cc

Max. working pressure

170 psi

Length of delivery hose

AUTOMOTIVE GARAGE EQUIPMENT

1.3 LUBRICATION TECHNOLOGY

Waste Oil drainer

HD-80 Ref.

HD-80

Capacity

80 L

Features : • •

1270

1780

•

Waste oil drainers with wheel-mounted tank. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit. 16 litres bowl with height-adjustable central support is mounted on a swivel joint that facilitates positioning.

Removable tool tray. Ref.

42085

80 L

Max. draining capacity

62 L

Max. discharge pressure

AUTOMOTIVE GARAGE EQUIPMENT

42085

Tank Capacity Bowl capacity

Safety valve.

16 L 0.5 bar

Waste Oil drainer

• • •

1400

•

Air-operated drainers with transparent prechamber. Ideal for quick engine oil change of any motor vehicle. The prechamber can be used for quick and independent draining. Its transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system.

Removable tool tray. 640

Safety valve.

2m suction hose with probe connection.

1.3 LUBRICATION TECHNOLOGY

Features :

43085

Tips

Vacuum gauge for checking suction power. Ref. Prechamber/tank connection and oil draining cock.

80 L

Max. draining capacity

62 L

Prechamber capacity Transparent prechamber with level indicator.

43085

Tank Capacity

Depressurisation pressure Max. discharge pressure

8L 7 bar 0.5 bar

Suction hose

Draining hose

AUTOMOTIVE GARAGE EQUIPMENT

Waste Oil drainer Features : • • •

1380

1880

1.3 LUBRICATION TECHNOLOGY

•

Air-operated combination suction-drainers. Ideal for quick engine oil change of any motor vehicle. The old oil is drained by gravity, through the bowl mounted on the side support and height adjustable, and by suction with the probes supplied. After depressurization the drainer works independently without requiring continuous connection to the compressed air system.

Removable tool tray.

Safety valve.

44084

Tips

Ref.

Practical for sucking more than 8 litres from trucks, tractors and heavy vehicles.

AUTOMOTIVE GARAGE EQUIPMENT

44084

Tank Capacity

80 L

Max. draining capacity

62 L

Bowl capacity

16 L

Depressurisation pressure

7 bar

Max. discharge pressure

0.5 bar

Suction hose

Draining hose

Waste Oil drainer

• • • •

1880

1660

•

Air-operated combination suction-drainer with transparent prechamber. Ideal for quick engine oil change of any motor vehicle. The old oil is drained by gravity, through the bowl, and by suction with the probes supplied. The prechamber can be used for rapid and independent suction. It transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurizations the drainer works without requiring continuous connection to the compressed air system.

Removable tool tray.

Safety valve.

2m suction hose with probe connection.

1.3 LUBRICATION TECHNOLOGY

Features :

44085

Tips

Vacuum gauge for checking suction power.

Prechamber/tank connection and oil draining cock.

Ref.

80 L

Max. draining capacity

62 L

Bowl capacity

16 L

Prechamber capacity Transparent prechamber with level indicator.

44085

Tank Capacity

Depressurisation pressure Max. discharge pressure

8L 7 bar 0.5 bar

Suction hose

Draining hose

AUTOMOTIVE GARAGE EQUIPMENT

1.3 LUBRICATION TECHNOLOGY

86 1065

AUTOMOTIVE GARAGE EQUIPMENT ø 5 x 700 mm malleabile/metal

ø 5 x 700 mm flessibile/flexible

Adjustable bowl to increase operating range

ø 8 x 700 mm flessibile/flexible

Antisplash screen

45506 45518 45505 45504

ø 7 x 1000 mm flessibile/flexible

1064 ø 6 x 700 mm flessibile/flexible

Removable oversize funnel

ø 6 x 700 mm malleabile/metal

Waste Oil drainer

45516

H053

45500

H059

45501

H202

45502

45517

45561

KG179

Waste Oil drainer

KR4302

H063

KR4305

KR4308

H036 H062 H054

S104 N513

KR4224 H066

H034 H090

H061

H177

H206 H047

H360

KR4306 H052 H061

ø 5 x 700 mm flessibile/flexible

ø 5 x 700 mm malleabile/metal

ø 8 x 700 mm flessibile/flexible

ø 6 x 700 mm flessibile/flexible

H209

KG179

H034

KR4222

1.3 LUBRICATION TECHNOLOGY

KG180

S215

KR4307

H059

KR4225 S211 H207 H057

KC114

H034 S402

I108

45506

45518

ø 6 x 700 mm malleabile/metal

ø 7 x 1000 mm flessibile/flexible

H059

45505

H057

45504

H053

A424 B690

KG079 S216

H059

KR4204 45500

KR4318

45501

H202

KR4218

H064

KG079

45502

45516

45517

KC458

KR4317

KC528/VERDE

KR8012

AUTOMOTIVE GARAGE EQUIPMENT

788

628

760

304

Waste Oil drainer

840

1.3 LUBRICATION TECHNOLOGY

42061

1250

235

660

42069

Tips

630

510

780

Features (42061/42069) : • • •

Pit & Wheel-mounted waste oil drainers. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on a pit. Equipped with antisplash screen which can be used as a support for draining oil filters.

The drained oil can be transferred from the collection bowl to the storage tank by suction with the incorporated probe or by an emptying pump connected to the fixed system.

Ref.

42061

42069

Capacity

110 L

50 L

AUTOMOTIVE GARAGE EQUIPMENT

Antisplash screen

Waste Oil drainer

• • • •

Air-operated combination suction-drainer with pantograph collection bowl and wheel-mounted tank. The old oil is drained by gravity with floor tray or raised for vehicles placed on an auto lift or pit. The suction-drainer also drains the old oil by suction with the probes supplied. After depressurization the drainer works independently without requiring continuous connection to the compressed air system.

Removable tool tray.

Safety valve.

Antisplash screen

46065

1.3 LUBRICATION TECHNOLOGY

Features :

1009

360

550

140

1410

480

570 2007

Tips

Ref.

65 L

Max. draining capacity

52 L

Bowl capacity

14 L

Depressurization pressure

7 bar

Depressurization time

2 min

Suction speed with oil at 70 - 80ºC, probes 6 mm. The air pressure for correct depressurisation is between 6,5 and 7 bar

46065

Tank Capacity

Suction hose Draining hose Max. discharge pressure

1.5 - 2 l/min 2m 2m 0.5 bar

AUTOMOTIVE GARAGE EQUIPMENT

Waste Oil drainer Features : • •

1.3 LUBRICATION TECHNOLOGY

•

Air-operated combination suction-drainer with pantograph collection bowl, transparent prechamber and wheel-mounted tank. The old oil is drained by gravity with floor tray or raised for vehicles placed on an auto lift or pit, or by suction with the probes supplied. The prechamber can be used for rapid and independent suction. Its transparency allows the quantity and quality of the sicked oil to be checked immediately. After depressurization the drainer works independently without requiring continuous connection to the compressed air system.

46116 Removable tool tray.

Safety valve.

Antisplash screen

1500

360

550

140

1770

650 590

2400

Tips

Vacuum gauge for checking suction power.

Prechamber/tank connection and oil draining cock.

Ref.

46116

Tank Capacity

115 L

Max. draining capacity

97 L

Bowl capacity

14 L

Prechamber capacity Transparent prechamber with level indicator.

AUTOMOTIVE GARAGE EQUIPMENT

Depressurization pressure Max. discharge pressure

8L 7 bar 0.5 bar

Suction hose

Draining hose

Waste Oil drainer Features : • •

Air-operated combination suction-drainer with large pantograph collection bowl and wheel-mounted tank. The old oil is drained by gravity with floor tray or raised for trucks placed on auto lifts or pit, or by suction with the probes supplied. After depressurization the drainer works without requiring continuous connection to the compressed air system.

Removable tool tray.

Safety valve.

Tank with 4 castors for easy positioning.

46215

Protection screen/filter splash guard and support base for filter.

Antisplash screen

1.3 LUBRICATION TECHNOLOGY

•

Tips

To empty the tank with device already depressurized, open the bowl/tank connection cock and in a few seconds the oil will be sucked in the tank.

The air pressure for correct depressurisation is between 6,5 and 7 bar

1560

510

660

230

1900

Ref.

46215

Tank Capacity

115 L

Max. draining capacity

97 L

Bowl capacity

50 L

Depressurization pressure

7 bar

Max. discharge pressure 700

600 2550

0.5 bar

Suction hose

Draining hose

AUTOMOTIVE GARAGE EQUIPMENT

Waste Oil drainer

Features : • •

Tips For optimal draining, the pump must function SLOWLY.

45180

The air feed must be ‘metered’ through the flow regulator, making sure that the vacuum gauge is always in the optimal position.

Ref.

830

1.3 LUBRICATION TECHNOLOGY

•

Wheel-mounted drainer-dispensers with pneumatic pump. They enable draining by means of the probes supplied, and delivery of the previously sucked liquid, for any vehicle or machine. The air pump, equipped with special VITON seals, is particularly suitable for sucking and delivering fluids such as: various oils, old oil, antifreeze liquid, diesel oil and allied products.

770

700

45180

Compression ratio

1:1

Relative flow rate

23 L/min

Air working pressure

6 bar

Suction hose

Draining hose

Waste Oil drainer

for Fuel

Features : • • • •

Wheel-mounted air-operated suction systems, for the management of fuels. The air pump, equipped with special VITON seals, is suitable for sucking petrol or diesel oil from any vehicle or motorcycle by means of the probes or connections supplied. The wheel-mounted drainer with and ideal for workshops and bodyshops. The system is equipped with an earth connection for discharging electrostatic current.

Tips

For optimal draining, the pump must function SLOWLY.

45250

AUTOMOTIVE GARAGE EQUIPMENT

The air feed must be ‘metered’ through the flow regulator, making sure that the vacuum gauge is always in the optimal position.

DIAPHRAGM Pumps Features : • • •

1.3 LUBRICATION TECHNOLOGY

•

High flow rate, short distance. Ideal for transferring fluids even in the presence of suspended solids. Die-cast aluminium, with high-quality components, ensure lasting and reliable operation even in extreme conditions. Compatible with water, diesel oil, mineral-vegetable oil and other similar products.

The slide valve of the air motor sends air (blue) to the left chamber which, pushing the membrane outwards, compressing the previously filled liquid (green). Through the effect of the pressure created valve 1 closes and valve 2 opens allowing the liquid to dispense (green). The right membrane then carries out the same movement by the shaft joining it to the left membrane, creating a vacuum. Through the effect of the vacuum, the valve 3 opens and the valve 4 closes, enabling suction of the liquid (orange).

The slide valve of the air motor sends air (blue) to the right chamber which, pushing the membrane outwards, compressing the previously filled liquid (green). Through the effect of the pressure created valve 3 closes and valve 4 opens allowing the liquid to dispense (green). The left membrane then carries out the same movement by the shaft joining it to the right membrane, creating a vacuum. Through the effect of the vacuum, the valve 1 opens and the valve 2 closes, enabling suction of the liquid (orange).

AUTOMOTIVE GARAGE EQUIPMENT

DIAPHRAGM Pumps PUMP INSTALLED ABOVE 200 l DRUM

SELF PRIMING PUMP INSTALLED ABOVE HEAD (NEGATIVE SUCTION)

PUMP INSTALLED BELOW HEAD (POSITIVE SUCTION)

(pump may initially work with dry column without problem)

(when it is necessary to empty completely the container)

SUBMERGED PUMP

PUMP INSTALLED ON HOPPER FOR HIGH VISCOSITY LIQUID

1.3 LUBRICATION TECHNOLOGY

(with special bung adaptor)

PUMP INSTALLED ON A MOBILE UNIT

Ref. Max. pressure Max. cycles per min

(hopper’s height and liquid density influence inlet pressure on the pump which must be not greater than 0.7 bar)

120-AB

1000-AB

8 bar

2000-AB 8 bar

400 cpm

300 cpm

147 cpm

Litres per cycle

0.18 l

0.59 l

3.95 l

Max. suction lift

4.5 m - dry column 7.5 m - wet column

5 m - dry column 7.5 m - wet column

Max. size pumpable solids

1.5 mm

3 mm

6.5 mm

Max. working temperature

100°C

Noise level

75 dB

82 dB

Max. air consumption

0.6 m³/min

1.6 m³/min

4 m³/min

Air working pressure

2 - 6 bar

Air inlet connection

F 3/8" G

F 3/4" G

Air outlet connection (muffler)

F 1/2" G

F 1" G

Fluid inlet connection

F 3/4" G

F 1 1/4" G

ANSI 150 - DIN PN 10 - JIS 10K 2" (50 mm)

F 1/2" G

F 1" G

ANSI 150 - DIN PN 10 - JIS 10K 2" (50 mm)

201 x 160 x 256 mm

260.5 x 201 x 345 mm

409 x 432 x 709 mm

Fluid outlet connection Dimension

(it is necessary to check the chemical compatibility between pump material and liquid)

(with a trolley or cart when pump must be often moved)

AUTOMOTIVE GARAGE EQUIPMENT

Waste Oil drainer

• • •

45300

45310

Air pump operated fixed drainers with diaphragm pump. They enable draining by means of the probes supplied and delivery of the waste liquid, for any vehicle or motorcycle. The diaphragm pump, equipped with special NBR seals, is particularly suitable for sucking and delivering fluids such as: various oils, old oil, antifreeze liquid, diesel oil and allied products.

45311

1.3 LUBRICATION TECHNOLOGY

Features (45300/45310/45311) :

Tips

For optimal draining, the pump must function SLOWLY. The fixed pump drainers are used to drain and deliver the liquid previously drained.

Ref.

The air feed must be ‘metered’ through the flow regulator, making sure that the vacuum gauge is always in the optimal position.

Best use of the article is obtained by connecting to a fixed system enabling the liquid sucked to be discharged directly into the disposal tank.

45300

45310

Max. Air pressure at pump

6 bar

Noise level

81 dB

Length of suction hose

1/2” x 4 m

1/2” x 10 m

Length of draining hose

1/2” x 4 m

1.5 - 2 l/min

Suction speed with oil at 70 - 80ºC, probes 6 mm.

45311

AUTOMOTIVE GARAGE EQUIPMENT

Waste Oil drainer

1.3 LUBRICATION TECHNOLOGY

TR2006YH

Features: • •

Portable and handy waste oil drainer. Suitable for motorcycles and cars.

AM47

Features: • • •

10 litres. Portable and handy waste oil drainer. Suitable for motorcycles and cars.

Oil dispensers

Features (HO-70/HO-70m) : Mechanical litre‑counter.

• • •

HO - 70

Ref.

HO - 70M

HO-70

HO-70M

Tank capacity

20 L

Length of delivery tube

SAE 240

Max. density of oil deliverable

Portable manual oil dispenser with or without mechanical litre-counter. It is suitable for high viscosity oils. These devices are normally used filling or topping up motor, gear and differential oil.

AUTOMOTIVE GARAGE EQUIPMENT

32024

32068

33024

Features (32024/32068/33024) : • •

Wheel-mounted oil dispensers suitable for high-viscosity oil. Ideal for filling or topping-up tanks for engine, gearbox, differential hydraulic power pack, reduction unit oil, etc.

1.3 LUBRICATION TECHNOLOGY

Oil dispensers

860

1160

880

1620

Removable drip bowl for easy emptying and cleaning.

280

Ref. Tank capacity Air working pressure Length of delivery tube Max. density of oil deliverable

280

32024

32068

24 L

65 L

33024 24 L

6 - 8 bar

SAE 240

SAE 130

AUTOMOTIVE GARAGE EQUIPMENT

1.3 LUBRICATION TECHNOLOGY

Oil dispensers

35200

35210

35275 37675

Features (35200/35210/35275/37675) : Oil dispensing systems with air operated pump. The ideal combination for dispensing oil .

Mobile oil dispenser platform: It is a practical and complete composition for dispensing oil of any density in any workplace.

Wall-mounted oil dispenser: complete modular solution for single use in fixed position or coupled with centralized systems for dispensing oil stored in drums or in tanks.

900

950

1410

Mobile oil dispenser platform (with 10m hose reel): The most practical and complete combination for dispensing oil of any density and in any workplace.

2200

• •

850

Ref.

35200

35210

35275

Compression ratio

3:1

5:1

Relative flow rate

14 L/min

18 L/min

Air working pressure Length of delivery hose Max. Viscosity of oil delivered Suitable for drum

920

850

920

AUTOMOTIVE GARAGE EQUIPMENT

37675

6 - 8 bar

1/2” x 10 m

1/2” x 4 m

1/2” x 10 m

130 SAE

240 SAE

180 - 220 kg

35330

36650

Note: Tank is not included.

Features :

•

System for oil dispensing from tank with pump applied on wall. A modular solution for oil delivery with connection to a centralised system or hose reel or directly to the delivery hose. Ideal for distribution from storage zones. Complete with accessories for connection to the compressed air system and dispensing system.

Ref.

1.3 LUBRICATION TECHNOLOGY

Oil dispensers

• •

35330

System for dispensing from tank with pump applied to the drain. A complete solution for dispensing oil and allied products. The dispensing pump and hose reel are fixed directly to the tank by means of sturdy brackets. The pump connection is fixed to the tank drain.

36650

Compression ratio

3:1

Relative flow rate

14 L/min

Air working pressure

6 - 8 bar

Length of delivery hose

1/2” x 1 m

1/2” x 10 m

Max. deliverable oil viscosity

130 SAE

AUTOMOTIVE GARAGE EQUIPMENT

Oil dispensers Features : • • •

1.3 LUBRICATION TECHNOLOGY

•

Oil bar ideal for dispensing oil and antifreeze liquid. Fed by air pump or with connection to a centralised system. It offers the availability of up to 3 different types of oil and antifreeze liquid. Quick and easy drawing of oil with possibility of controlling the quantity by means of the digital litre-counter.

37686

165

460

670

Tips

STOP

555

Equipped with an easy to clean, removable dripcatcher tray and sturdy support grid.

Type of installation:

100

AUTOMOTIVE GARAGE EQUIPMENT

Tap with double valve and antisplash filter to guarantee delivery while preventing sprays caused by possible air bubbles in the system. Closing is automatic when the lever is released.

Grease dispensers

710

840

1.3 LUBRICATION TECHNOLOGY

350

340

300

68012

68213

Features :

•

• •

Portable manual grease pumps. Practical and functional, they can be used in all workplaces and enable quick, high-pressure greasing on any motor vehicle or mechanism. They are equipped with a grease follower plate that protects the lubricant and ensures positive priming.

The follower plate, indispensable when using particularly hard greases, is drawn towards the bottom of the drum by the vacuum created by the pump in grease suction stage.

Wheel-mounted grease pump with air pump. Practical, functional and compact, they can be used in all workplaces and enable quick, high-pressure greasing on any motor vehicle or mechanism. Equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Ref.

68012

68213

Tank capacity

13 kg

140/150 bar

50:1

60 g

Relative flow rate

1000 g/min

Air working pressure

6 - 8 bar

1/4” x 2.5 m

1/4” x 4 m

Pressure of grease in delivery Compression ratio Capacity of every 10 cycles of lever

Length of delivery tube

AUTOMOTIVE GARAGE EQUIPMENT

101

1.3 LUBRICATION TECHNOLOGY

Grease dispensers

64020

64033

64064

64150

Note: Follower plate is not included.

Features :

460

AUTOMOTIVE GARAGE EQUIPMENT

500 680

2200 510

640

900

1000

840 280

102

1010

Air operated grease dispenser. Practical, functional and compact, they can be used in all workplaces and enable quick, high-pressure greasing on any motor vehicle or mechanism.

810

• •

Air-operated portable grease pumps for dispensing grease in 20-30 kg drums. Practical and easy to handle, their feature reduced volume.

Ref.

The grease pump : A practical, complete and handy combination for dispensing grease in small and medium size containers in any workplace.

Wall-mounted grease dispensing kit: Complete modular solution for separate use, in fixed position or combined with centralized systems for dispensing grease stored in drums.

64020

64033

64064

Compression ratio

50:1

Relative flow rate

1500 g/min

Air working pressure Length of delivery tube Suitable for drum Drum cover diameter Follower plate diameter

1.3 LUBRICATION TECHNOLOGY

Grease dispensers

64150

6 - 8 bar

1/4” x 4 m

1/4” x 12 m

20 - 30 kg

50 - 60 kg

ø 240 - 280 mm

ø 260 - 300 mm

ø 370 - 420 mm

ø 255 - 300 mm

ø 360 - 400 mm

AUTOMOTIVE GARAGE EQUIPMENT

103

1.3 LUBRICATION TECHNOLOGY

INDICATIONS FOR SYSTEM

Medium and large-size system for dispensing oils and allied products. This system includes storage and dispensing systems for several fluids such as various types of oil, grease, antifreeze and old oil. Each fluid has one or more delivery points located at different distances from the storage point.

•

For the purpose of correct and effective planning it is essential to consider each distribution line as a separate system.

With this fundamental data it is possible to correctly determine the most suitable products and accessories for the type of application required. Example: • Type of pump (with tank, drum or wall-mounted) • Delivery system (from hose reel, oil bar, etc.) • Type of delivery guns (with or without litre-counters) • Accessories and unions for completing the system

To correctly design a distribution line or system, and for efficient operation, it is essential to know the following data: • Type of fluid to be delivered, its density and temperature. (A temperature decrease determines an increase in density.) • Distance between the pump and delivery point. • The number of delivery points and quantity/minute of fluid to be delivered for each pump. • Horizontal distance between the pump and the delivery points connected to it. • Vertical distance between the pump and the delivery points connected to it.

104

AUTOMOTIVE GARAGE EQUIPMENT

Vertical and horizontal distance of the pump from the fluid suction point. (a precise physical law applies.)

1.3 LUBRICATION TECHNOLOGY

MONITORING

COMPUTERIZED FLUID MANAGEMENT SYSTEM

The computerized management system can be used by small garages and large service centres, as well as in industry in general, when different types of oil and antifreeze, stored in centralised tanks in a single place, must be delivered by several dispensers located in various places in the workshop.

AUTOMOTIVE GARAGE EQUIPMENT

105

POWER STEERING FLUID FLUSH MACHINE Features :

1.3 LUBRICATION TECHNOLOGY

• • • • •

It improves the defects of traditional fluid exchange system. Eliminate leaking, over pressurised or other poor conditions. Adopt integrated transparent plastic steel. Unique rubber joint for oil extraction (no leaking). With master cylinder cover lit.

Ref. Capacity

PC 500

Dimension Weight

PC 500 5L 410 x 310 x 900 mm 10 kg

AUTOMATIC TRANSMISSION FLUID FLUSH MACHINE Features : • • • •

It’s never easy to replace waste fluid completely by traditional method. The new fluid is easy to mix with old one during the exchange. The result induces, slow acceleration, shaking while shifting gears, over heating and excessive fuel consumption. ATF exchanger can solve the problems and restore the performance of gear box.

Ref. Feature Function

Dual Motors, Two Directions

Capacity

Used Fluid & New Fluid 20 L Separate

Oil-output Voltage

WH-202A

Pump Dimension Weight

106

AUTOMOTIVE GARAGE EQUIPMENT

WH-202A Circulate, Filtering Oil Extraction

3-4 L 230V 1ph Gear Pump 610 x 565 x 900 mm 55 kg

BRAKE FLUID TESTER Features : • •

High-tech brake fluid sensor, easy to operate. The tester exam the quality and hydrated degree of the brake fluid. There is an electronic circuit design for the tester to maintain its accuracy in the event of power shortage. The tester has an easy-to-read display.

WH-509

Ergonomically designed handle to fit the hand perfectly.

Battery Condition: Green Light: Battery OK Red Light: Battery LOW

The probe is attached to a flexible coil that can be extends up to 1.5 m.

Easy-to-read display: shows the fluid condition as OK, marginal or STOP

The tester measures the boiling point of the fluid by inserting a probe into the brake fluid in the master cylinder.

1.3 LUBRICATION TECHNOLOGY

• •

PART WASHER Features :

20 Gallon capacity part washer. Recirculation pump 50 gallon per hour. ON/OFF switch with indicator light. Small parts bin. Removable shelf.

• • • • •

Ref.

TR4001-20

550

320

C Capacity

790 20 gallon

AUTOMOTIVE GARAGE EQUIPMENT

107

PART WASHER Features : • • • • 1.3 LUBRICATION TECHNOLOGY

• • • •

Low-pressure pneumatic system enables: Continuous liquid detergent flow with brush for thorough washing. Washing by dipped in the parts dipped in the liquid detergent in the tank. The possibility of collecting liquid in the tank guarantees the following advantages: Easy moving of tank without risk of liquid spilling out. No evaporation of liquid during idle periods. Easy recovery of old liquid. Decanting of the product inside the tank for always having a clean liquid.

70365 For correct use, add 48 - 52 litres of detergent liquid.

Washing with brush, with continuous liquid flow.

Dip washing, with parts placed in the tank.

Brush or dip wash management unit.

Decanting filter/screen.

a. Draining cock. b. Total emptying plug (under the tank).

510

1060

200

660

The pneumatic systems works at low pressure 0.5 bar, consuming very little air.

Ref.

65 L

Washing tank capacity

50 L

Required quantity of liquid 600

108

AUTOMOTIVE GARAGE EQUIPMENT

70365

Tank capacity

50 L

Max. working pressure

0.5 bar

Max. blowing gun pressure

12 bar

AUTOMOTIVE GARAGE EQUIPMENT

DIAGNOSTIC & ANALYSIS

1.4 110

122

114

123

116

126

120

127

121

128

AUTOMOTIVE SCANNER

1.4 DIAGNOSTIC & ANALYSIS

Features : •

Powerful – – Super fast communication speed. – – Full size 320 x 240 backlit screen. – – Big 128mb flash memory. – – Real-time PC interface through USB. – – LED communication check light. – – Gas Analyzer interface. – – CAN protocol onboard enabled. – – Generic OBD2 and EOBD.

•

Extensive Multiscan provides the extensive coverage for most Asian and European vehicles as well as various smaller local manufactures.

MULTISCAN

Plus

– – Asian Cars: Toyota, Lexus, Honda, Acura, Mitsubishi, Nissan, Infiniti, Mazda, Subaru, Suzuki, Isuzu, Daihatsu, Hyundai, GM-Daewoo, KIA, Samsung, Ssangyong.

– – American Cars: GM, Ford, Chrysler.

– – European Cars: Mercedes Benz, BMW, Volkswagen, Audi, SEAT, Skoda, Opel, Vauxhall, Ford, Renault, Peugeot, Saab, Citroen, Fiat, Alfa Romeo, Lancia, Volvo.

– – Latin American Cars: GM-OPEL

– – Australian Cars: Holden, Ford.

– – Malaysian Cars: Proton, Perodua.

•

Reliable 128MB large capacity memory includes all software applications on board. No additional cost spending for optional software package - only a 16 pin OBD2 adapter will enable you to test all carts with OBD2 data link connector up to manufacturer specific level regardless of brand name

•

Flexible Multiscan provides real-time PC interface and windows based click-and-go software update through USB. Multiscan is also designed to support CAN-BUS communication, which is going to be a simple but serious criteria whether the equipment can be used in the next decade or not.

Multiscan provides complete coverage for various control systems not to mention the ECM or PCM also supports extended functions activation, reset basic settings, adaptation, repair guides, etc.

110

AUTOMOTIVE GARAGE EQUIPMENT

AUTOMOTIVE SCANNER

Optional

Vehicle Battery Cable

USB Interface Toyota Semi Circular

HOST PRO

Cigrarette Lighter Cable RS232C Interface

Honda

Nissan / Samsung

Real Time Interface

Gas Analyzer Real Time Interface

Optional

Mitsubishi Hyundai Proton GM / Daewoo

Mitsubishi Hyundai Proton

Kia 20pin

Kia / Mazda

PC Upgrade Cable Volkswagen / Audi

Mazda

Main Data Link Cable

Mercedes Benz 38-pin Multiplexer

BMW

MB 4-pin adapter

1.4 DIAGNOSTIC & ANALYSIS

Toyota Rectangular

Optional

Subaru

OBD II Standard

Ssangyong 20pin

Ssangyong 14pin Ultraplexer

GM / Opel 10pin

Optional

Holden 6pin

Ford 20pin

Ford EEC IV

Multifunctional scan tool cabling schematics.

AUTOMOTIVE GARAGE EQUIPMENT

111

AUTOMOTIVE SCANNER Features :

1.4 DIAGNOSTIC & ANALYSIS

•

• • • • • • • • • • • •

PC-VCi

Wireless Technology. You can now be completely untethered from the vehicle (even when it’s up on the lift.), and have immediate Internet access to real time web-enabled diagnostic assets, on-line diagnostic information and tech data. Extensive vehicle coverage. Large touch screen. Systems search where supported by the vehicle. Software that is easy to use. Read and erase DTC’s. Graph and record multiple lines of live data. Actuation tests & adaption component installation. OBD11 by vehicle manufacturer. Idle relearns, diesel injector coding, diesel pump initialization, DPF regeneration function. Manufacturer specific functions. Steering angle sensor calibration. Record and save displayed live data for review and comparison.

SOFTWARE UPDATES

Web Parts and Data

Web Based Communications Process

112

AUTOMOTIVE GARAGE EQUIPMENT

Package Contents: • • • • • • • • • •

PC-VCi Main Unit VCi Unit Case OBD II/ CAN 16-Pin Connector DC adaptor USB Cable COM Cable Battery Cable Main Cable

• • • • •

• •

Jumper Cigarette Cable Bluetooth Adapter Mercedes-Benz - 4 Pin - 14 Pin (Sprinter) - 38 Pin BMW - 20 Pin Cherry/Fiat - 3

• • • • • • • • •

Chrysler CCD 16 GM - 12 Pin Honda - 3 Pin Hyundai/Mitsubishi 12&16 Pin Kia - 20 Pin Mazda - 17 Pin Nissan - 14 Pin Toyota - 17 & 22 Pin VW/Audi - 2+2 Pin

1.4 DIAGNOSTIC & ANALYSIS

AUTOMOTIVE SCANNER

Optional accessories:

Stargas Gas Analyser

OTC Techscope 2-Chanel Labscope

OTC Diesel Smoke Meter

Ensemble trolley

AUTOMOTIVE GARAGE EQUIPMENT

113

DYNAMOMETER

1.4 DIAGNOSTIC & ANALYSIS

P 440

4WD Power Absorber Dynamometer - P 440 Dynamometer with eddy-current brake. In addition to power measures of inertial dynamometer, the brake allows ECU mapping, engine break-in and several real road driving simulations as variable load test, air drag & rolling friction simulation, and steady load test, slope & trailer towing simulation.

Large diameter knurled rollers which allow high-speed tests up to 300 km/h. Pneumatic lifter for easy roller entrance/exit of vehicles.

114

P 220 / 420

AUTOMOTIVE GARAGE EQUIPMENT

2WD Inertial Dynamometer - P 220 Inertial dynamometer. Inertia acceleration test to evaluate vehicle’s wheel-power, drive-train frictional losses and engine power. Built-in weather station, to correct power diagrams according to international standards. Upgrade kit to 2WD power absorber model. (Optional) 2WD Power Absorber Dynamometer - P 420 Dynamometer with eddy-current brake. Upgrade kit to 4WD power absorber model. (Optional)

Dynamometer with eddy-current brake. - P 440 & P 420 only

Electrically adjustable wheelbase system for 4WD vehicle, directly from the control panel. - P 440 only

Vehicle tachometer test with preset speed.

IR remote control as standard, for tests directly from the vehicle.

Centrifugal cooling fan, 16000 m³/h at 90 km/h, with manual and automatic start both from the control panel and the remote control. Essential for vehicle safety. (Optional)

DYNAMOMETER

1.4 DIAGNOSTIC & ANALYSIS

Windows-based Software Data acquisition for engine temperature, turbo-charger pressure, Lambda probe. Normalized power diagram, torque and speed. Customized graphics for all measured data. Tests with variable-step of load and speed for a complete “after repair” engine diagnosis.

Optional Accessories:

Tie-down kit for vehicle’s safety.

Ref.

Drive-on ramps for on-floor installations.

P 440

P 420

Power supply voltage Max. engine power Vehicles Minimum wheel diameter

P 220

400V 3ph + 230V 1ph 1000 HP

Functioning Max. speed

Upgrade kit for investment extension.

500 HP Eddy-current brake

500 HP Inertial

4WD

2WD

300 km/h

10"

Testing axle max. load capacity

2,500 kg

IR remote control

Standard

Cooling fan (Optional) Track Wheelbase range Dimensions

Centrifugal - 16,000 m3/h - 90 km/h - 4 kW 1,000 - 2,000 mm

1,000 - 2,000 mm

1,000 mm

1,000 - 2,000 mm 1,000 mm

5300 x 3150 x 400 mm

890 x 3150 x 380 mm

AUTOMOTIVE GARAGE EQUIPMENT

115

BRAKE TESTER for Cars

Features : • • • • • • •

1.4 DIAGNOSTIC & ANALYSIS

• • • •

VIDEOSYSTEM

COMPACT PRO W

Windows-based Software Totally new, the accuracy of the graphics permits a perfect legibility even far away from the vehicle cabin.

116

AUTOMOTIVE GARAGE EQUIPMENT

Management of the pressometric pedal in order to find out the effort applied on the braking pedal. Built-in weighting device to measure static and dynamic weight. Roller blocking device to help vehicle exit. Measured parameters: Maximum braking force. Braking dissymmetry Static and dynamic weight of the axle or of a single wheel of an axle. Braking efficiency and sliding. Effort to pedal and to the action lever to the braking systems. Irregularity of the braking force. Rolling resistance.

Roller Unit For Cars And Vans Single roller bed set; rollers lifted to better contain the vehicle during the test. High precision extensimetric measurement cells, long lasting, reliable and highly resisting to overload. Also available with self-braking motors version and in “ICE” versions, with electrically welded coating rollers for spyked tyres.

BRAKE TESTER

1.4 DIAGNOSTIC & ANALYSIS

for Cars

Example of multi-line, multi-station system. Car Testing Centre.

Optional Accessories:

Ref.

Radio remote control, for the selection and operation of the numerous programs. Effort measurement to pedal included in standard composition.

6111.20.01

6111.21.01

Series

VIDEOSYSTEM

Compact Pro

Roller system

Single bed set

Max. load capacity

3000 daN

Max. braking effect

600 daN

Motors (kW)

2x4

2 x 4A

Rollers (D x L)

200 x 700

Speed

Covering

Plastic cement

Precision

± 0.5 %

AUTOMOTIVE GARAGE EQUIPMENT

117

BRAKE TESTER

1.4 DIAGNOSTIC & ANALYSIS

for Trucks

The alphanumeric keyboard is mounted on a flap which gives an ergonomic position during utilization and protects from dust and shocks when closed.

VIDEO SYSTEM

TIR SYSTEM

Features : • • • • • • • • Roller Unit For Cars And Trucks Twin roller bed set is available with different power ratings (11-15 kW, 400V / 3 ph /50 Hz). High precision extensimetric measurement cells - reliability and high resistance to overloads.

118

AUTOMOTIVE GARAGE EQUIPMENT

• • • •

Pre-set for integrated air pressure tests on air circuits. Management of the pressometric pedal in order to find out the braking efforts. Built-in weighting device to measure static and dynamic weight. Roller blocking device to help vehicle exit. Measured parameters: Maximum breaking force. Braking dissymmetry Static and dynamic weight of the axle or of a single wheel of an axle. Braking efficiency and Sliding. Effort to pedal and to the action lever to the braking systems. Irregularity of the braking force. Rolling resistance.

BRAKE TESTER for Trucks

1.4 DIAGNOSTIC & ANALYSIS

Windows-based Software Totally new, the accuracy of the graphics permits a perfect legibility even far away from the vehicle cabin.

Example of multi-line, multi-station system. Truck Testing Centre.

Optional Accessories:

0-612003

0-612004

0-612005

0-612007

Series

Ref.

V.SYS P150-2V

V.SYS P150

V.SYS P110

TIR SYS. 110

Roller system

Twin bed set

Max. load capacity

20,000 daN

4000 daN

5000 daN

4000 daN

Max. braking effect

Radio remote control, for the selection and operation of the numerous programs. Effort measurement to pedal included in standard composition.

Motors (kW)

2 x 5.5/15

2 x 15

2 x 11

Rollers (D X L)

250 x 1070 mm

Speed (km/h)

2.5/5

Covering

Plastic cement

Precision

± 0.5%

AUTOMOTIVE GARAGE EQUIPMENT

119

SUSPENSION TESTER Features : •

•

1.4 DIAGNOSTIC & ANALYSIS

•

• •

The new ST-NX suspension test bench tests the efficiency of suspensions on cars and light vehicles, measuring the adherence value according to the EUSAMA measuring method. EUSAMA (EUropean Shock Absorber Manufacturers Association) is the European standard mostly applied in the world. The suspension tester is available in 2 versions: – – “Complete inspection line” version, when values showed on the screen of the brake tester cabinet. – – “Stand alone” version, complete with cabinet and monitor (COMPACT PRO W ST-NX). For complete inspection lines it is compatible with previous HPA test benches in both dimensions and electric connections. Measured values: – – Axle weight and weight of each wheel. – – Adherence percentage of each wheel. – – Adherence percentage difference between the wheels of each axle. – – Minimum dynamic loading (minimum power to the ground).

COMPACT PRO W ST-NX

Ref. Power supply

2x3 kW

Max. vehicle axle load (transit)

3000 kg

Max. static load for axle weighing

2500 kg

Minimum track of vehicle

800 mm

Maximum track of vehicle

2200 mm

Frequency of forced oscillation Weighing accuracy Noise level in operation

AUTOMOTIVE GARAGE EQUIPMENT

400V 3ph + 230V 1ph

Motors

Amplitude of forced oscillation

120

COMPACT PRO W ST-NX

6 mm 25 Hz ±1% (full-scale) < 70 dB (A)

SIDESLIP TESTER Features :

•

• •

The equipment which measures the SIDESLIP of the wheels dynamically in transit consists of a sideways sliding plate and a hanging measurement cabinet with both digital and luminous indication. Instrument cabinet which available in 2 models: Wallmounted (standard), or column-supported (optional). The cabinet will also accept a printing unit (optional) which will document the measurement and tolerance excess. Sliding plate - available in 2 models for cars and lorries. Its limited thickness permits its fixing directly on the floor (with ramps on and off as optional) or it may be sunk to floor level. The sliding plate has a low tension power supply. Printout language change by means of 8 dip-switch combinations. Series connection to a terminal for in-line tests.

1.4 DIAGNOSTIC & ANALYSIS

•

1021 1022 (Truck)

Ref. Power supply Measurement scale Resolution

1021

1022

230V 1ph

-12 – 12 m/km

0.2 m/km

Digital indicator

3 cifre

Max. sliding plate load

2 Ton.

8 Ton.

400 x 1006 x 45 mm.

800 x 1006 x 47 mm.

Plate dimensions

AUTOMOTIVE GARAGE EQUIPMENT

121

PLAY DETECTOR Features : • • • •

1.4 DIAGNOSTIC & ANALYSIS

•

The play detector is used to identify defects in the steering and suspensions of motor vehicles. The plate-type play detector allows a maximum load of 13 ton per axle and generates a thrust force on each runway of 49800 N. The play detector is installed, “in-floor” or “on-floor”, on the sides of an inspection pit. The plates are remote-controlled by means of a torch with several push-buttons. The inspection can be performed by just one person, without lifting the vehicle. Pressing the push buttons moves the hydraulic cylinders sideways or lengthways. From inside the pit, the operator can visually inspect the vehicle’s axle for play (joints, pins, suspensions, steering box, gears, axle structures, etc.).

PD 689533

Ref. Power supply Three-phase electric motor Control solenoid valve outputs Halogen lamp Max. vehicle axle load Max. load on each plate Operating pressure

3 kW 24V 12V - 24 W 13 ton 6.5 ton 215 bar ±5 bar 49800 N

Plate working dimensions

980 x 790 mm

Sideways travel of each plate

AUTOMOTIVE GARAGE EQUIPMENT

400V 3ph

Thrust force on each plate Lengthways travel of each plate

122

PD 689533

65 mm 65 mm

Noise level when running

< 70 dB (A)

Hydraulic system oil (q.ty 14 L.)

3°E a 50°C

REFRIGERANT RECOVERY & RECYCLING MACHINE

A/C Diagnostic Module Permits running diagnostic tests on all A/C systems and prints graphs and information for problem solving.

• • • •

• •

NITROGEN BOTTLE CONNECTION For external bottle (not supplied). The machine automatically charges the A/C system with nitrogen and checks for leaks by monitoring pressure, emitting an alarm if leaks are found.

ECK 3000

• • • •

for ECK 3000

for ECK 3000 Refrigerant Identifier Module The gas identifier feature permits immediate identification (before recovery) of the type of refrigerant gas and allows the technician to establish whether or not the gas is recyclable, thus avoiding contamination damage of the internal bottle of the recharger.

Advance Data Base Featuring vehicle model selection for fast, easy consultation of air conditioning system refrigerant quantity data.

Automatic Functions (ECK 3000) : • • • • • • • • •

Recovery - recycling Used oil discharge Programmable vacuum New oil injection Tracer injection Refrigerant charging Automatic self-diagnosis on each solenoid valve. Standard leak check (in vacuum phase). Nitrogen leak test (under pressure),

LCD Display - alphanumeric, back-lit for maximum display of all data. Distributor Group - internal, patented, optimized for maximum performance and reliability. Refrigerant Management: with this function, the user can create an archive of the operations performed by the station. Nitrogen Bottle Connection for external bottle (not supplied). The machine automatically charges the A/C system with nitrogen and checks for leaks by monitoring pressure, emitting an alarm if leaks are found. Advanced Data Base. The info CLIMA CD-ROM supplied as standard equipment contains information on vehicle A/C systems and positioning of the high and low-pressure couplings, plus wiring diagrams. A/C system flushing software. A/C Diagnostic Module. Software Updates via internet through RS232 serial port. Thermal Printer with a customization option for username and graphs of the pressures obtained during checking of the A/C system.

1.4 DIAGNOSTIC & ANALYSIS

Features :

• • • • •

Automatic discharge of non-condensable vapors from the bottle. Bottle filling: on-bard, automatic. Bottle heater: automatic. Service alarm acoustic and visual, for filter maintenance and replacement request Sensor for bottle temperature.

AUTOMOTIVE GARAGE EQUIPMENT

123

REFRIGERANT RECOVERY & RECYCLING MACHINE Features : • •

1.4 DIAGNOSTIC & ANALYSIS

•

A complete and accurate diagnosis station equipped with a full set of functions. Extremely precise pressure sensor, in combination with a modern diagnosis strategy, can detect even the smallest leaks in the hydraulic system. Within the wide range of available accessories, the SAE J2670 compliant sealant system for microleaks makes it possible to seal leaks in the A/C system with a single operation, also with the system pressurised.

ARTIK 500

Features : • • •

RV 150

124

AUTOMOTIVE GARAGE EQUIPMENT

LCD display. Refrigerant Management: for creating a customized archive of all refrigerant transactions. Database advanced.

1.4 DIAGNOSTIC & ANALYSIS

REFRIGERANT RECOVERY & RECYCLING MACHINE

Ref. Refrigerant type Service procedure Voltage

ECK 3000

ARTIK 500

R134a

RV 150 R134a

Automatic or manual

Automatic or manual 230V 1ph

230V 1ph

Operating temp. range

± 10 gr

Operating temperature range

11/49°C

5°C - 50°C

11/49°C

2 filters for humidity and acidity

90 L/min

72 L/min rated capacity, 0.1 mbar vacuum level

Filter system Vacuum pump Compressor Recovery speed Refrigerant bottle Hoses Dimensions Weight

112 L/min rated capacity, 0.1 mbar vacuum level Sealed, 12 cc

Sealed, 12 cc

Max. 300 g/min in liquid phase

10 kg, refillable

12 litres, refillable

3 meters

55 x 60 x 105 cm

45 x 60 x 90 cm

50 x 60 x 105 cm

90 kg

60 kg

90 kg

AUTOMOTIVE GARAGE EQUIPMENT

125

HEAD LIGHT TESTER Features : • • • • LOOK LS

LOOK OPT

• • • •

1.4 DIAGNOSTIC & ANALYSIS

• •

Features : • • • • LOGIC 100

DIGIT 200

• • •

Ref. External power supply Internal power supply

2 versions: on wheels or on rail (DIGIT 200R - LOGIC 100R). Turning column with pedal to help the alignment of the optical camera with the vehicle axis. Digital illuminometer with graduated scale in KLux (DIGIT 200) or analogic with 3 graduated scale (No need of power supply) (LOGIC 100). Mirror panel to align the optical camera with the vehicle axis. Lens made of optical glass, 200 mm diameter. Adjustable screen by means of a graduated wheels placed on the back of the optical camera. Locking handle to facilitate the vertical sliding of the optical camera.

LOGIC 100

DIGIT 200

LOOK OPT

LOOK LS

Not required

7,5 ÷ 16 Vdc

7,5 ÷ 16 Vdc 9V battery (transistor)

Not required

9V battery (transistor)

Power consumption

No consumption

30 mA at 9 Vdc

Alignment system

Optical collimator

Laser collimator

Proper alignment with car light

Mirror panel

Laser laying unit

Horizontal alignment of the chamber

Water level collimator

Base frame

One-way mobile base

Max. working height

141 cm

145 cm

Min. working height

24 cm

26 cm

65 x 61 x 177 cm

68 x 59 x 180 cm

35 kg

34 kg

Dimensions Weight

126

Available in 2 Versions: With laser alignment (LS) or optical alignment (OPT). Turning column with pedal to help the alignment of the optical camera with the vehicle axis. Digital illuminometer with graduated scale either in Klux and "candles". Pre-set for remote connection by means of RS 232. Lens made of optical glass. Automatic switch off. Available in 12 languages. Electronic recognition of the light beam. Automatic Help to adjustment and check up of the projector. Extra light adjustment of the optical camera. Laser alignment of the projector.

AUTOMOTIVE GARAGE EQUIPMENT

GAS ANALYZER Features : • • • • •

The gas analyzer boasts its highest quality, accuracy and reliability - Andros® 6241 inspection level gas bench. Affordable basic 4-gas analyzer that is upgradable to a 5-gas analyzer with an optional NOx kit. Advanced LCD display: User friendly menu selections and onscreen instructions. Simple Lambda <-> AFR conversion. Windows based PC interface program provides more comprehensive and professional diagnosis Internal thermal print. (Optional)

Advance features : • ULTRA 4/5

• •

Ultrascan or Multiscan works as a remote control module for the gas analyzer. Gas readings are presented as a part of scan tool diagnostic live data simultaneously. Combined scan and gas data can easily be downloaded to a PC by using Ultrascan/Multiscan’s featuring USB realtime PC interface function.

Ref.

1.4 DIAGNOSTIC & ANALYSIS

•

ULTRA 4/5

Measurable ranges

Hydrocarbon (HC): 0 - 10,000 ppm Carbon Monoxide (CO): 0 - 10% Carbon Dioxide (CO₂): 0 - 20% Oxygen (O₂): 0 - 23% Lambda: 0.5 - 2.5, AFR: 0 - 99.9 Nitric Oxide (NOx): 0 - 5,000 ppm (Optional)

Available fuel type

Gasoline, LPG, methyl alcohol, ethyl alcohol, hydrogen

Display

320 x 240 LCD with backlight

Measuring device

CO, CO₂, HC: Non-dispersive infrared O₂, NOx: Electro chemical"

Power

230V 1ph

Probe and hose

Hose: 8m, Probe 0.65m

Dimensions

220 x 270 x 550 mm

Weight

9.2 kg

Purge

Automatic / manual

AUTOMOTIVE GARAGE EQUIPMENT

127

SMOKE METER Features : • •

•

1.4 DIAGNOSTIC & ANALYSIS

• • • • 820 Stand-alone unit with integrated LCD display, printer and keyboard.

840 “Client” unit to be integrated with display unit (PC, VIS, etc.) or in multifunction inspection lines.

128

AUTOMOTIVE GARAGE EQUIPMENT

Smoke meter for Diesel engines of cars and industrial vehicles. The new smoke meter chamber retains the reliability and measurement accuracy in heavyduty applications (such as trucks and agricultural machinery) packaged in a compact design and topped with energy-saving features. Serial interface for installation on multifunction testing lines. RPM and engine oil temperature measurement (with additional probes only). Integrated connectors: 1 RS232 serial port, 1 PS2 port. Temperature probe: 5 - 40°C. Wireless source with dedicated battery kit (optional).

AUTOMOTIVE GARAGE EQUIPMENT

AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

1.5 130

136

131

137

132

138

133

135

AIR COMPRESSOR Features : • • • •

Feather valves are used in inlet and outlet valve sets to assure high volumetric efficiency. The basic cast iron structure with specially designed aluminum alloy cylinder head makes compressors rigid, durable, and operate in good cooling condition. High air volume strainer-silencer units can effectively reduce noise level. Compact design means little installation and operation space.

Ref. Motor output power

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

Working pressure

180 psi

Rotating speed

1050 rpm

Free air delivery

320 L/min

Air reservoir Weight

85 L 235 kg

Features : • • • • • •

Diesel operated portable air compressor. Designed to meet the needs of field or road service applications. Feather valves are used in inlet and outlet valve sets to assure high volumetric efficiency. The basic cast iron structure with specially designed aluminum alloy cylinder head makes compressors rigid, durable, and operate in good cooling condition. High air volume strainer-silencer units can effectively reduce noise level. Compact design means little installation and operation space.

Ref.

HTA-65H

5.5 HP

Working pressure

180 psi

Rotating speed

1050 rpm

Free air delivery

303 L/min

Weight

AUTOMOTIVE GARAGE EQUIPMENT

HTA-65H

Motor output power

Air reservoir

130

D4 3 HP

85 L 135 kg

AIR COMPRESSOR Features : •

•

V33

Ref. Motor output power

V55 V75 V100

High Performance : Free air delivery increased through high efficiency. Compact and Light in Weight : Mounting space is 25% smaller than horizontal type. Each compressor has been designed so as to ensure a logical arrangement of the motor and control device, and to locate the gravity center as low as possible for the purpose of stabilization. Approved Tank: Complies with ASME code section VIII division one. Certification of machinery department provided.

3.7P-12.5V5/6A 5.5P-12.5V5/6A 7.5P-12.5V5/6A

3.7P-12.5V5/6A

5.5P-12.5V5/6A

7.5P-12.5V5/6A

V55

V75

V100

5 HP

7.5 HP

10 HP

5.5 HP

7.5 HP

10 HP

Working pressure

180 psi

Rotating speed

900 rpm

970 rpm

900 rpm

880 rpm

1250 rpm

900 rpm

Free air delivery

907 L/min

400 L/min

550 L/min

760 L/min

397 L/min

567 L/min

Air reservoir

300 L

230 L

270 L

Weight

260 kg

317 kg

363 kg

295 kg

330 kg

400 kg

AUTOMOTIVE GARAGE EQUIPMENT

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

•

131

AIR COMPRESSOR Fixed Speed Rotary Screw

Ref.

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

Capacity

Motor Power

bar

psig

l/s

m3/min

cfm

102

1.2

L7.5-8

116

1.1

L7.5-10

145

1.0

L7.5-12.5

182

0.8

L11-7

102

1.75

L11-8

116

1.6

L11-10

145

1.5

L7.5-7

132

Max. Working Pressure

L11-12.5

12.5

182

1.3

L15-7

102

2.5

L15-8

116

2.4

L15-10

145

2.1

L15-12.5

182

1.8

L22-7

102

3.7

131

L22-8

116

3.5

124

L22-10

145

2.1

12.5

182

2.7

102

103

6.2

219

L22-12.5 L37-7 L37-8

116

100

6.0

212

L37-10

145

5.5

194

L37-12.5

182

4.6

162

L55D-7

7.5

102

162

9.7

343

L55D-8

8.5

116

160

9.6

339

L75D-7

102

203

12.2

431

L75D-8

116

202

12.1

427

L90D-7

102

285

17.1

604

L90D-8

116

283

17.0

600

L110D-7

102

327

19.6

692

L110D-8

116

19.5

689

AUTOMOTIVE GARAGE EQUIPMENT

Discharge Connection

Weight

Dimension (L x W x H) mm

inch

kgs

7.5

1”

290

Belt Driven 810 x 710 x 1095

1”

360

Belt Driven 950 x 800 x 1140

1”

390

Belt Driven 950 x 850 x 1060

1”

620

Belt Driven 1150 x 885 x 1200

1 1/2”

870

Belt Driven 1260 x 1070 x 1370

2”

1450

Direct Driven 1800 x 1280 x 1350

100

2”

1850

Direct Driven 2000 x 1450 x 1420

120

DN50

2020

Direct Driven 2150 x 1450 x 1650

150

110

DN65

2800

Direct Driven 2150 x 1450 x 1650

HJ-05G

HJ-10G HJ-15G

Ref.

HJ-05G

HJ-10G

Capacity

5 HP

10 HP

HJ-15G 15 HP

Flow rate

0.8 nm3/min

1.5 nm3/min

1.9 nm3/min 80°C

Inlet temperature

80°C

Ambient temperature

40°C

Outlet air dew point

-17 - 23 °C

Operating pressure

7 kg/cm2

Freon type

R134a

Freon compressor capacity

1/4 HP

1/2 HP

Power source Dimension Weight

230V 1ph

340x630x640 mm

340x670x700 mm

370x765x750 mm

45 kg

55 kg

74 kg

AUTOMOTIVE GARAGE EQUIPMENT

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

Compressed Air Dryer

133

Compressed Air Dryer WHY COMPRESSED AIR NEED TO DRY TREATMENT?

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

Atmosphere contain vapor, dust, impurity and etc., include lubricate oil gas more after compressing. If we don’t remove moisture content, dust, these oil gas and mud and form mixture first, and send it directly into compressor may caused the following conditions gradually:

134

The atmosphere is compressed the partial pressure that will produce the vapor, this high-pressure vapor is slightly cooled in the pipeline, form saturated condition, and easy to congeal liquid water, cause part corrosion destroy lubricate and accelerate the parts to wear down.

Air compressor need to lubricate with oil, seal and cool, naturally partial lubricate oil gas and air compressed sneak into the pipeline, oil gas in the pipeline run into moisture content, dust and corrosion impurity etc., will form dirty liquid of stickiness influence air quality.

Dust turn moisture content and combination of oil gas into a harmful granular thing gradually, can cause and damage to air system and machines slowly also.

PROCEDURE OF COMPRESSED AIR RUN INTO THE REFRIGERATION COMPRESSED AIR DRYER 1.

High-pressure humid air enter from A leading cooler to B, lower the temperature by C low-temperature cold air in D rapidly.

Via air energy-saving device two drop in the temperature, flow into with refrigerant making heat exchange make temperature drop to design temperature 1.6°C. (Mix the coagulation water in the air, impurity and oil gas etc., channel with air into separator isolate moisture content and impurity, and then via draining off water device discharge automatically.)

Separated dry ice-cold air through C to D, rapidly lower the temperature of the hot air from A to B, on the other hand by environment temperature contact the temperature rise to environment temperature of the pipeline to avoid dew, dripping and corrosion, and come after the consequence. • Guarantee steady and good air quality. • Improve the service life of the machines equipment. • To use inlet heat and outlet low temperature, cold heat exchange energy saving back normal temperature. • Reach the economy of economizing the energy to require.

AUTOMOTIVE GARAGE EQUIPMENT

Our spray booth gives stable working performance. It can provide the car paint spraying process with desirable workspace. Our product is considered as the most ideal model for the auto repair shops. It is usually applicable for both car repair factories and common car 4S shops in those countries or regions where the environmental protection is demanded.

Low noise and large air volume insulated fan. To guarantee the quality of painting, positive pressure in the cabin can effectively prevent dust getting into the workplace.

EPS panels. It keeps a good warm preservation, low heating guide, light weight and vivid color. 20 years life-span.

One-time setup to complete the entire procedure and auto-spray with the average temperature in different situation.

The AUTO-Damper is oil-saving and electricity-saving.

High security pressure lock. Once the air overpressure occurs in the room, the emergency exit will automatically opened.

Unique large square air filter system. It can make air inside the spray booth symmetrically filtrated and purified. It also keep the wind speed pressure the best state when operating.

The heat exchanger is heated through the circulation heating of the fresh air. The heating temperature form 20Â°C to 60Â°C only needs 4-6 minutes.

Lighting system. Professionally designed electronic ballast specialized for spray booth are used to keep zero shadow when paint.

AUTOMOTIVE GARAGE EQUIPMENT

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

Spray booth

135

WELDING MACHINE Migweld 210S and 210SEF are designed after careful consideration to meet the requirements for the automotive body repairs and light production industry. Problems caused by “Burn Through” Common in the light gauge metal welding by the MIG process have been eradicated with the Migweld 210S and 210SEF. This is done through better circuitry in the PCB, good quality rectification components and effective wire feeder. Finally, careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings enable us to achieve a high output with maximum efficiency for this class of power sources.

Features : •

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

MIGWELD 210S

Ref. Primary supply Max. input current Output rating Duty cycle

MIGWELD 210S

MIGWELD 210SEF

230V 1ph

33 A

210A / 24

30%

Duty cycle rating at 60%

145A / 21V

Duty cycle at 100%

110A / 20V

Output control

Tapping

Voltage adjustment

2 steps

10 steps

Open circuit voltage

18 - 45 V

30 - 210 A

Filler wire size range

0.6 - 1.0 mm

Wire feeding speed

1 - 17 m/min

Time (Spot/Stitch)

0 - 5 sec.

IPS21

H 180° C

72 kg

82 kg

820 x 450 x 720 mm

Welding range at 50~210A

Degree of protection Insulation class Weight (without input cable & plug) Dimension

136

• • • • • • •

The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. Internal or external wire feeder. 2-steps voltage selection. Welding characteristics are excellent: both in CO² and mixed gases. Better welding parameters 0.6mm - 1.6mm (Min. 30 amps Max. 500 amps). Heavy duty chassis construction. Double thermal protection for transformer and rectifier. Ergonomic and value added features. (Tool container, torch holder and lower gas tray holder).

AUTOMOTIVE GARAGE EQUIPMENT

MIGWELD 210SEF

Features : • • • • • • • •

The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. 10-steps: It had continuous, spot and stitch welding to facilitate different kind of welding environment. Welding characteristics are excellent: both in CO² and mixed gases. Digital Amp and Volt display meter. Better welding parameters 0.6mm - 1.6mm (Min. 30 amps Max. 500 amps). Heavy duty chassis construction. Double thermal protection for transformer and rectifier. Ergonomic and value added features. (Tool container, torch holder and lower gas tray holder).

VACUUM CLEANER Features : • •

Blower Function. Dirt and leaves can be easily blowswept from difficult-to-reach areas. The special cartridge filter makes wet and dry vacuuming possible without changing the filter. Ideal for most cleaning tasks in the DIY workshop.

Ref

WD 3200

Air flow rate

68 l/s

Vacuum

21 kPa

Container capacity

17 L

Max. power rating

1400 W

Power cable Weight Dimensions

4m 5.4 kg 390 x 340 x 505 mm

AUTOMOTIVE GARAGE EQUIPMENT

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

•

137

PRESSURE CLEANER Features : • • •

1.5 AIR COMPRESSOR, WELDING MACHINE, SPRAY BOOTH & CLEANER

•

138

Cold-water pressure washer for daily commercial use. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to the compact class.

HD5/12C

Adjustable push handle. In standard position safe fixing of standard accessories and easy transport possible. Low position for easy transport in different types of transport cars. Suitable for use in many fields.

Ref.

HD 5/12 C

Power supply

230V 1ph

Water flow rate

500 L/h

Pressure

120 bar

Max. water feed temperature Connected load Weight Dimensions

AUTOMOTIVE GARAGE EQUIPMENT

up to 60 °C 2.2 kW 23 kg 375 x 360 x 935 mm

AUTOMOTIVE TOOLS & ACCESSORIES

BATTERY & ELECTRICAL

2.1 142

144

142

144

142

144

143

144

Automotive lead acid battery charger

STM 1210

STM 4810

Ref.

STM 1210

STM 4810

Input voltage

230V 1ph

No. of battery

1 x 12Vdc

4 x 12Vdc

8 x 12Vdc

2.1 BATTERY & ELECTRICAL

STM 9610

Charging current

Max. 10A (Low & High Select)

Max. 10A (Selectable)

Safety protection

Input Fuse 2A, Output Fuse 15A

Input Fuse 5A, Output MCB 15A

Input Fuse 7A , Output MCB 15A

160 x 220 x 120 mm

340 x 330 x 300 mm

4.5 kg

16.5 kg

25.0 kg

Dimensions Weight

Battery charger / engine starter

Portable power station / engine starter

SMART 450

Features : • • • • • • •

Features : • • •

Used as slow & fast charger and booster. Selectable battery voltage range (12V & 24V). Input breaker protection. Selectable charging current control. Fitted with rubber-tyre wheels and handle for instant mobility. Robust in design and maintenance free. Easy to operate, reliable and economical.

Ref. Input voltage

• •

230V 1ph 450A

Charging voltage

12 - 24Vdc

Charging current

1 - 60A (Selectable)

Weight

AUTOMOTIVE TOOLS & ACCESSORIES

PS-208-1 PS-208-4

SMART 450

Cranking power

Output

142

STM 9610

12V Start - 5.4 kW 24V Start – 10.8 kW 37.0 kg

Ref. Output voltage Dimension

• •

With 10A spade type fuse. With AC adaptor & DC cigarette plug. Dual cigarette socket for DC 12V accessories. PS-208-1 Output: DC 12V Built-in sealed lead-acid rechargeable 12V 17A battery. PS-208-4 Output: DC 12V / 24V switchable output from clamp. Built-in sealed lead-acid rechargeable 12V 17A battery x 2 pcs.

PS-208-1

PS-208-4

12 V

DC 12 / 24 V

345 x 90 x 375 mm

345 x 165 x 375 mm

Cable length

65 cm

136 cm

Weight

18 kg

16 Kg

Emergency power supply Features : • • •

Help car emergency start and start the car immediately even in the cold weather. Power supply for mobile, digital camera MP3, MP4 and so on. Comes with torch, lighting, flashing functions, it also can transmit a SOS sign.

EPS Ref.

EPS

Output voltage

12V/2A, 5V/2A, 19V/3.5A

Battery capacity

12,000 mAh

Operation temperature

-20°C - 60°C

Input

12V/1A

Starting current

200A

Peak current

400A 160 x 75 x 28 mm

Weight

450 g

Battery load tester Features :

Features : • • • • • 50113

•

100A load capacity. Tests 6 and 12 volts batteries up to 1000 CCA. Testing: battery state of charge, battery cranking ability, charging system output, starter test. Rubber insulation carrying handle for both comfort & safety. Heavy duty, color coded, insulated clamps. Durable, ventilated, blue enamel steel case.

• • • • • • • • BT 501

Tester for 6V and 12V batteries combine with 12V & 24V Charging System. Multiple rating systems can be selected. Tests discharged batteries down to 1.5 volt. Operating range: 40 - 2000 CCA. Rating system: SAE, DIN, ENC1, ENC2 & IEC. Unique patented technology. Bright, 2 lines, 16 characters LCD display. Readout display: Battery capacity, state of pass, recharge, recharge & retest, bad & replace, bad cell & replace at the end of the test.

AUTOMOTIVE TOOLS & ACCESSORIES

2.1 BATTERY & ELECTRICAL

Dimension

143

Booster cable

Battery filler

HM-1043 300AMP

Features : • •

Connect the power to the weak battery vehicle and start the vehicle. Special rubber cable material to prevent oil and extend working life.

Ref.

Large suction designed to suck easily and quickly. For battery fuller or any other liquid.

Battery hydrometer

2.1 BATTERY & ELECTRICAL

• •

Length

300AMP

Electric circuit tester

F 425 HM-1612

Feature : • • •

High precision densimeter. Used to control the battery’s liquid level. Aerometer with a scale of 0 (battery discharged), 50 (half-charged) and 100 (fully charged).

Ref.

Length

Weight

F 425

245 mm

30 g

Metal case battery brush

Features : • •

144

Features :

HM-1261

Designed for cleaning the battery terminals. You can use on both sides.

AUTOMOTIVE TOOLS & ACCESSORIES

Features : • • •

Sharp prove tip covered with brass protection cap. Check function of car lights faster and easier. Check range: 6 - 12, 24v

Top post battery terminal

Features : • •

S005

Enhance battery conduction Suitable for connecting cables under the heads of the saddlebolts.

AUTOMOTIVE TOOLS & ACCESSORIES

ENGINE & TRANSMISSION

2.2 146

147

152

154

157

146

148

153

155

158

146

150

153

156

146

152

153

156

147

152

153

157

Fluid hose clamp

Spark plug wire pliers

HM-1342

HM-1633

Features :

•

Completely or partially closes flexible brake, fuel, and vacuum fluid line. All steel construction with adjustable locking collar.

2.2 ENGINE & TRANSMISSION

Mechanic stethoscope

•

Specially designed for removing hard to reach high voltage lead wire. Good insulated handle and the grooves avoid any sliding down in operation.

Timing light

HM-1007

HM-1626

Features : • • •

Fast and easy way to locate noises in engines, bearings and other parts. Aluminum alloy probe / needle for finding the exact location of specific noises. Ideal for pinpointing unusual vibration or suspected leaks. (Valves, piston ring, gaskets etc…)

Features : • • •

Works on all 12V gasoline engines. High impact ABS housing. Detachable heavy duty inductive pick-up clamps and leads for easy operation and replacement.

Digital advance timing light with Tack, Dwell & Volt Tester

Features : • • • • • • DA-5100

146

AUTOMOTIVE TOOLS & ACCESSORIES

Professional quality tool works with conventional and Distributorless Ignition Systems (DIS). Large LED makes readings easy. Tactile keypad for function selection. Works on all 12V gasoline engines. Detachable heavy duty inductive pick-up clamps and leads for easy operation and replacement. Bright xenon flash tube provides concentrated light for easy visibility of timing mark.

HM-1734

HM-1735

HM-1736

Piston ring compressor set

Features : •

Self locking ratchet pawl prevents premature release and allows positive locking action.

Ref.

15-K210

HM-1737

Height

Capacity

HM-1734

3”

21/8” - 5”

HM-1735

3”

31/2” - 7”

HM-1736

4”

31/2” - 7”

HM-1737

6”

31/2” - 7”

Piston ring tools

Features : • • • •

Include pliers and 6 bands. Use the pliers with any band to install pistons from 27/8” to 43/8” in diameter. Self-locking ratchet allows you to compress rings by minute graduation. Pliers can be used vertically or horizontally.

2.2 ENGINE & TRANSMISSION

Piston ring compressor

Flexible metal funnel

Features : • • • Ref.

Special steel. Nickel-plated. For removing and mounting rings. Size

Ref.

Tube length

A1202-1

40 - 100mm

HM-7007

370 mm

A1202-2

80 - 120 mm

HM-7008

630mm

A1202-3

110 -160 mm

AUTOMOTIVE TOOLS & ACCESSORIES

147

Oil filter wrench

Features : • •

Removes stubborn filters. Slip joint design makes adjustment fast & easy.

Ref.

Range

A2063

Range

KW100

A2064

60 - 90 mm

KW200

75 - 95 mm

A2065

85 - 115mm

KW300

95 - 115 mm

2.2 ENGINE & TRANSMISSION

2 way Oil filter wrench

55 - 75 mm

reversible filter wrench

HM-1942 A2087

Features : •

Features :

Use with 1/2” square drive tool.

Ref. HM-1942

148

Ref.

60 - 115 mm

AUTOMOTIVE TOOLS & ACCESSORIES

Range 21/2” to 4”

• • • • •

Special design to remove & tighten most of the oil filters. Quick & easy to change the direction. Steel jaw grip filter without slipping. The large range enable this to fit most standard size filters form 23/8" to 4". Use with 3/8" drive.

Oil filter wrench cap

filter chain wrench

A2071

Features : Ref.

Use with 1/2" square drive or 21mm wrench. Size

Shape

HM-901

SW65 mm

P-14

HM-902

SW67 mm

P-14

HM-903

SW74 mm

P-14

HM-903-1

SW75 mm

P-15

HM-903-2

SW74 mm

P-8

HM-903-3

SW74 mm

P-15

HM-903-4

SW73 mm

P-14

HM-903-5

SW73 mm

P-30

HM-904

SW79 mm

P-15

HM-905

SW73 mm

P-15

HM-906

SW84 mm

P-18

HM-907

SW89 mm

P-15

HM-908

SW91 mm

P-15

HM-909

SW92 mm

P-15

HM-910

SW95 mm

P-15

HM-910-1

SW91 mm

P-12

HM-911

SW76 mm

P-12

HM-911-1

SW79 mm

P-15

HM-912

SW86 mm

P-14

HM-913

SW91 mm

P-15

HM-914

SW101 mm

P-15

Ref. A2071

Range

Length

45 - 140 mm

150 mm

3/8” drain plug wrench

Features: •

Set of sockets for removal or replacement of oil drain plugs.

2.2 ENGINE & TRANSMISSION

•

TA-26

Ref. TA-26

Contents 7 sockets: 3/8”, 8, 9, 10, 12, 14, 17 - Hex. 4 sockets: 3/8”, 8, 11, 13 - Square”. 1 sliding T-handle: 3/8”.

AUTOMOTIVE TOOLS & ACCESSORIES

149

Valve spring compressor

HM-1711

Features :

•

• •

Reversible jaw adaptor for multi-valve engines. Capacity 45 - 145mm, throated clearance 250mm big window jaw adaptor for easy replacement of valve collects. Dual size in 25mm and 30mm diameter.

Valve spring compressor kit 2.2 ENGINE & TRANSMISSION

A2061

One man operation

•

These tools are designed to compress and release valve spring after removing the collets. Pantograph-type levers ensure a consistent coaxial contact with the valve. Driving adaptor: 16mm, 19mm, 23mm, 25mm, 30mm.

Valve spring compressor Universal Overhead Cam

HM-1238

A2050

Features : • • • •

150

Easy for single use, operate by a thread bar to fix on right place. Large window on the valve pusher to supply more space to replace the valve collets. Use with on 12V, 16V, 20V, and 24V engine. Without having to remove the cylinder with this tool, it has saved a lot of manpower.

AUTOMOTIVE TOOLS & ACCESSORIES

Features : • •

For use on most foreign & Domestic engines. Driving adaptor: 23mm, 25mm, 30mm

Valve spring compressor Universal Overhead Cam

professional cylinder head service set

A2057

•

Completes service tool kit for OHV & OHC petrol or diesel engines on Audi, Nissan, Toyota, Chrysler, Honda, Mazda, Mitsubishi, Porsche, Volve, VW.

valve stem seal pliers

Features : • •

Complete upper engine service kit enables in situ removal and replacement of worn valve springs and guides/bushings. Suitable for 8, 16 and 24 valve engines. Supplied in carry case.

valve seal removal & installer kit 2.2 ENGINE & TRANSMISSION

Features :

A2055

A3326 HM-1717

Features : •

For removal of valve stem seal and lower valve spring guide.

Features : • •

Works on both valves still seated or removed. Precision machined seal driving adapters guide the seal for proper setting.

AUTOMOTIVE TOOLS & ACCESSORIES

151

seal puller

5pc hook & pick set

HM-1730 HM-1608

Features : • •

Removes oil & grease seals. Two tips fit most application.

Pull O-ring, seals, cotter pins and brushes quickly and easily. Stainless steel points.

2.2 ENGINE & TRANSMISSION

fan clutch tools

A8652

A8653

A8660

Features : • •

Removes lock nuts on thermo-Viscous fans found on Ford, Mercedes & etc. Made from tempered pressed steel.

Ref.

152

Size

A8652

65 mm

A8653

36 mm

A8660

32 mm

AUTOMOTIVE TOOLS & ACCESSORIES

tamperoof mix adjuster

Universal Crankshaft Pulley & Camshaft Pulley Pulling Aid

HM-6228P A1115

Features :

Design for adjusting CO for Proton, Nissan.

professional vacuum & fuel tester

unique compression tester

A2063

2.2 ENGINE & TRANSMISSION

•

HM-1622

Features : • • •

Large 31/2” diameter gauge with color-coded reading scales. Extra long heavy-duty rubber hose and 14mm/18mm manifold adapter. Checks for worn or defective parts in fuel pumps, vacuum system.

Features : • • • • •

Air gauge with quick coupling & release valve. High-tension connecting pipe with safety lock coupling. Crank shaft type test pipe with rubber. Transverse axis test pipe with rubber plug. Adapter: M10 x 1.0, M12 x 1.25, M14 x 1.25, M18 x 1.5

AUTOMOTIVE TOOLS & ACCESSORIES

153

fuel injection test kit

fuel injection test kit for Asian Vehicles Only

15-K225A

Features : • • •

The fuel injection test kit tests fuel injection systems on vehicles on most makes and models. Pinpoints problems in filters, lines and regulators. Comes complete with assorted hoses, hose barb fittings and hose clamps to adapt to earlier vehicle models, as well as current.

15-K225C

Features : • • • •

2.2 ENGINE & TRANSMISSION

diesel compression tester set for Mack Truck Engines

Checks fuel pressure and volume on most Asian system. Quickly diagnoses fuel related problems like hesitation, stumble, stall and lack of power caused by low fuel pressure, defective fuel pressure regulators, low fuel volume to the injectors & etc. All fittings have quick connect Schrader valves for safety and ease of hookup to the gauge assembly. Fitting seals are compatible with most popular cleaning solvents.

diesel engine compression tester for Cummins Engines

15-K103

Features : • • •

154

Set contains one gauge and a complete adapter system for testing cylinder compression through the injector port on most Mack truck engines. Gauge includes release valve and 368mm (14.5”) of hose, dial reads from 0 - 1000 psi and 0 - 70 bar. Unique swivel end quick coupler allows the operator to connect the adapter quickly and easily.

AUTOMOTIVE TOOLS & ACCESSORIES

15-K287

Features : • • •

Supplied with one gauge and all necessary adapters. Gauge includes release valve and 368mm (14.5”) of hose, dial reads from 0 - 1000 psi and 0 - 70 bar. Unique swivel end quick coupler allows the operator to connect the adapters quickly and easily.

Gasoline Engine Injecting Pressure Tester Set

A2054

2.2 ENGINE & TRANSMISSION

Blind Hole Bearing Puller

A1015

Features : • • • •

One slide hammer assemble & 4 clamp. Open clamps by turning handle clock wise to snug against the bearing. Pulling out evenly without damage the parts. Attachments for 3/8” to 1/2” (10 - 14 mm), 9/16” to 11/16” (15 - 19mm), 5/8” to 1” (18 - 25mm), 1” to 11/4” (25 - 32mm), I.D. Bearing Pulling.

AUTOMOTIVE TOOLS & ACCESSORIES

155

clutch spring compressor

HM-1721

HM-1841

Features : • • •

Adjustable legs fit most cars & trucks for replacement of transmission rear clutch piston snap ring. Special design to assemble & reassemble the clutch snap ring easier by straight way when you operate. Clutch diameter from 64mm to 175mm.

• •

For removing and installing the transmission rear clutch piston snap ring. Adjustable for most models of American cars and light trucks.

universal clutch aligner set

2.2 ENGINE & TRANSMISSION

clutch aligner set

Features :

A2009

Features :

•

• •

156

HM-2110

Align single disc clutches on most vehicles, light truck & tractors. Properly aligns clutch plate by tapered cone fitting into pilot bushing or bearing. 8 collects ranging from 0.465" (11mm) to 0.980" (24.9mm).

AUTOMOTIVE TOOLS & ACCESSORIES

• •

This tool makes the alignment and assembly of clutch. Specially designed for those vehicles equipped with late-model front wheel drives without pilot bearing in flywheel. Ideal for vehicles up to 5 tons with single plate clutch.

transmission clutch spring compressor

transmission pressure gauge set

13-K192

• • •

For removing and installing the transmission rear clutch piston snap ring. Suit for most cars. Apply pressure to the retaining washer in the clutch to compress clutch piston return spring.

automatic transmission & engine oil pressure tester

Features : • • • • •

For all major manufacturer domestic and import vehicles. Set contains: 2 gauge assemblies for high and low pressure ranges. 9 adaptors to test a wide variety of domestic and import automatic transmissions. 4 special fittings are also included for connection to hard-to-reach test ports in areas requiring a 45° or 90° angle.

power steering tester 2.2 ENGINE & TRANSMISSION

Features :

13-K243

A1233 13-K228

Features : • • •

Checks oil pressure in both automatic transmissions and engines. The 21/2" gauge reads from 0 - 300 psi in both American and metric readings. Includes 6ft of hose with both US and metric fittings.

Features : • • •

Accurate, reliable power steering analysis. Determines if trouble is in front suspension or steering linkage. Saves valuable time when rebuilding or replacing parts not actually defective.

AUTOMOTIVE TOOLS & ACCESSORIES

157

universal radiator pressure tester kit

HM-1018

Features :

Test cooling system for leaks. Suitable for: Nissan, Mitsubishi, Mazda, Subaru, Toyota, Honda, Ford GM, Chrysler, VW, Audi, Volvo, Saab, Mercedes Benz, BMW, Renault, Fiat, Alfa Romeo, Infiniti, Geo, Suzuki, Isuzu, Lexus, Opel, Peugeot, Jeep, Rover, Citroen, Truck.

2.2 ENGINE & TRANSMISSION

• •

158

AUTOMOTIVE TOOLS & ACCESSORIES

UNDERCAR & SUSPENSION

2.3 160

162

164

166

160

162

165

166

160

163

166

161

163

166

161

163

166

alignment tools

A1007

A1052

Features : • • •

2.3 UNDERCAR & SUSPENSION

angle locator

• •

With 2 spacers to adjust the angle. Applicable: Mercedes, Mitsubishi, Honda.

multi-purpose inner tie rod tool

HM-1839

A2057

Features : • •

160

Features :

With 4pcs alignment plates. Hydraulic function. Suitable for most car.

Use the nuts under the tool to change the angle. With the magnet used to put on the tools when you are working.

AUTOMOTIVE TOOLS & ACCESSORIES

Features : • •

The master tie rod tools easily replaces inner tie rod ends without removing the rack & pinion. Capacity: 33 - 42mm

drop forged coil spring compressor

coil spring compressor Features : • • • • •

F270

F370

Suitable for lower wishbone diameter size is smaller than 30mm. Provided a 100Nm torque driver. Available for using air impact. Able to work on-car. Wide vehicle applications: Chrysler, Chevrolet, Citroen, Ford, Honda, Hyundai, Kia, Mazda, Mitsubishi, Peugeot, Renault, Skoda, Suzuki, Toyota, Volvo, VW, BMW 3 Series (1996-2013), Mercedes Benz W202 / W204 (1997-2013)

Features : • •

The tool is designed for use in limited space under wheel arch. Jaw design is fitting to warp coil claws for safely.

Ref.

Max. Opening

F270

270 mm

F370

370 mm

SD1001F

LS001

TRK1500-2

JL-9511

Features :

• •

•

Manual operated absorber spring dismantle tool. Designed for 95% vehicle in the market. Easy to operate and more reliable.

•

Hydraulic operated absorber spring dismantle tool. Designed for 95% vehicle in the market. Easy to operate and more reliable.

•

2.3 UNDERCAR & SUSPENSION

absorber spring dismantle tool

Hydraulic operated absorber spring dismantle tool. Designed for 95% vehicle in the market. Easy to operate and more reliable.

AUTOMOTIVE TOOLS & ACCESSORIES

161

spring compressor

interchangeable fork spring compressor

for Mercedes

HM-1801

HM-1941

Features : • •

C.V. JOINT BANDING TOOL

2.3 UNDERCAR & SUSPENSION

with Cutter

162

Features : • •

Applicable for types 116 / 123 / 124 / 126 / 129 / 140 / 201 / 202 and 4-matic include. Advantage: Newly developed automatic 3-point safety interlock and automatic freewheel at end of stroke.

Approved by BGS German Workers Safety Insurance. Developed for modern macpherson suspensions, using a range of 3 sets of interchangeable monobloc forks.

hub slide hammer puller

B2149 HM-1628

Features : • •

Tools is easily removed, by sliding sideways after winding has been completed. Instruction: 1. Place band around boot and through nose of tools and through slot in winding body. 2. Using a 1/2” socket wrench or by hand wind the band until sufficient tension is applied. 3. Rotate handle over the boot to lock the band. 4. Slide tool free-end down with a hammer.

AUTOMOTIVE TOOLS & ACCESSORIES

Features : • • •

Use as a regular wheel or hub puller as well as a flange type puller. The bolt circle range is from 41/2” to 51/2” which covers all major cars and small trucks with flange type axles. The 4 slots in the adapter allow to be used on either 4, 5, or 6 bolt or stud designs.

ball joint separator

HM-F0416

HM-1945

Features : • • •

Features : • •

Tempered drop forged steel one piece construction for long & rough usage. Replace worn out ball joint easily with a hammer striking. Applicable also for removing CV drive shafts on FWD vehicles.

Fork Opening

Length

Ref.

HM-F0412

Ref.

24 mm

300 mm

HM-1945

HM-F0416

18 mm

410 mm

Universal Caliper Wind Back Kit

Special design for using on ball joint with limited space. The mini operation space: 6 - 7mm.

Jaw Opening 19 mm

bearing race & seal driver set

13-K120B

A2017

Features : • •

Winds back brake piston for replacing brake pads. Suitable for most cars.

2.3 UNDERCAR & SUSPENSION

HM-F0412

ball joint separator

Features : • • •

Makes it easier to insert bearing race. Collars fit most standard wheel bearing sizes. Helps reduce damage to both race and axle housing.

AUTOMOTIVE TOOLS & ACCESSORIES

163

bearing separator

hydraulic separator puller set

TRK203B4

Features : •

415 hardened 42˚ - 45˚

Features : Ref.

Capacity

•

HM-9000

11/4” - 21/4”

HM-9005

21/4” - 31/2”

•

HM-9015

3” - 41/2”

HM-9025

4” - 6”

HM-9035

6” - 8”

2.3 UNDERCAR & SUSPENSION

hydraulic puller set

Separator set with 7.5 - 10 ton capacity hydraulic ram. Equipped with 4 bearing separator.

internal & external puller

TRK203D

TRK201B

Features : • •

164

Separator set with 7.5 - 10 ton capacity hydraulic ram with Tommy bar. Suitable for agricultural machines, garage and industrial use.

AUTOMOTIVE TOOLS & ACCESSORIES

Ref.

Internal diameter

External diameter

Weight

TRK201B

15-30, 30-80 mm

15-80 mm

4.5 kg

armature bearing puller

pilot bearing puller 3 Jaws

M1974

Features : • Ref.

Range

HM-AB1

19 - 35 mm

HM-AB2

24 - 55 mm

HM-AB3

35 - 80 mm

mechanical puller

Ref.

Capacity

M1974

1/2” - 11/2”

mechanical puller 2 Legs

Ref.

Size

Range

9112

Size 4”

Range 50 - 102 mm

9107

4”

50 - 102 mm

9113

6”

60 - 152 mm

9108

6”

60 - 152 mm

9114

8”

80 - 203 mm

9109

8”

80 - 203 mm

9115

10”

100 - 254 mm

9110

10”

100 - 254 mm

9116

12”

120 - 305 mm

9111

12”

120 - 305 mm

AUTOMOTIVE TOOLS & ACCESSORIES

2.3 UNDERCAR & SUSPENSION

3 Legs

Ref.

Ideal for automotive flywheel, pump bearing, generator bearing, machine bearing & etc.

165

disc brake piston separator

headlight adjusting & brake spring hook

HM-1944

AB10

Features : •

Fits in brake caliper to push back pistons for new brake pads installation.

brake spring plier

Feature : •

This tool made from heat treated alloy steel is specially designed for removing and installing hard-to –reach headlight adjusting springs. OAL 6".

universal drum brake tool kit

13-K264 13-K265

2.3 UNDERCAR & SUSPENSION

Features : •

brake spoon

Features •

Contains 6 most popular tools for brake servicing.

abs brake pressure test kit Features : • HM-1239

•

Features • •

166

To easily disassemble the return spring from the drum brake shoe.

Designed to adjust brakes on most cars and light trucks. Universal angle design for most cars.

Ref.

Length

HM-1239

155 mm

AUTOMOTIVE TOOLS & ACCESSORIES

•

13-K237

Tests the hydraulic pressure available to each wheel assembly. Kit allows for balanced testing to ensure pressure is being applied equally to front and rear wheels. 22pc adapters set and reference table included.

AUTOMOTIVE TOOLS & ACCESSORIES

WHEEL REPAIR TOOLS & ACCESSORIES

2.4 168

172

176

178

181

169

172

176

179

181

170

172

176

180

182

171

172

176

181

182

171

173

177

181

182

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

tyre repair insert

168

Features : • •

Ref.

Description

A-3 A-3-R

Most popular unit for crown repair of passenger/light truck tires. Available in a wide range of sizes and establish new standards in one-piece repair technology.

Use for tread damage up to

Qty / Box

Qty / Case

3 mm

100

3 mm

Inch

MINICOMBI A-3

1⁄8”

MINICOMBI A-3-R

1⁄8”

•

A-4.5

MINICOMBI A-4.5

3⁄16”

4.5 mm

•

A-6

MINICOMBI A-6

1⁄4”

6 mm

•

A-6-R

MINICOMBI A-6-R, kit Includes: 8 A-6 repair inserts 1 tube BL-5F

1⁄4”

6 mm

•

B-8MC

MINICOMBI B-8MC

5⁄16”

8 mm

•

B-8-R

MINICOMBI B-8-R, kit Includes: 8 B-8MC repair inserts 1 tube BL-5F

5⁄16”

8 mm

•

B-10

MINICOMBI, B-10

3⁄8”

10 mm

B-10-R

MINICOMBI, B-10-R

3⁄8”

10 mm

190

Awl for REMASTEM & MINICOMBI repairs

199

Rasp for REMASTEM & MINICOMBI repairs

AUTOMOTIVE TOOLS & ACCESSORIES

•

radial tyre repairs Features :

Variety of radial-ply repair units to meet the diverse demands of today’s passenger, truck, and OTR tyre applications. Suitable for use with all current vulcanizing systems.

Ref.

Description

Size

Qty / Box

RAD-0

Radial repair unit

Ø 19⁄16“

RAD-1

Radial repair unit

23⁄4” x 15⁄8”

Qty / Case • 328

•

RAD-110

Radial repair unit

2” x 23⁄4”

154

•

RAD-112

Radial repair unit

23⁄8” x 41⁄8”

154

•

RAD-114

Radial repair unit

3” x 43⁄4”

108

•

RAD-115

Radial repair unit

31⁄2” x 2 x 3⁄4”

•

RAD-120

Radial repair unit

47⁄8” x 3”

•

RAD-122

Radial repair unit

67⁄8” x 3”

•

RAD-124

Radial repair unit

81⁄2” x 3”

•

RAD-125

Radial repair unit

41⁄2” x 47⁄8”

•

RAD-126

Radial repair unit

27⁄8” x 101⁄2”

•

RAD-128

Radial repair unit

27⁄8” x 131⁄8”

•

RAD-135

Radial repair unit

51⁄4” x 71⁄4”

RAD-140

Radial repair unit

77⁄8” x 315⁄16”

•

• •

•

RAD-142

Radial repair unit

101⁄4” x 5”

RAD-144

Radial repair unit

13” x 5”

•

RAD-145

Radial repair unit

73⁄4” x 91⁄8”

•

RAD-146

Radial repair unit

71⁄4” x 171⁄4”

•

RAD-150

Radial repair unit

23” x 71⁄8”

RAD-152

Radial repair unit

23” x 91⁄2”

RAD-155

Radial repair unit

101⁄4” x 131⁄8”

RAD-156

Radial repair unit

29” x 101⁄2”

•

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

•

• • 12

• •

RAD-160

Radial repair unit

40” x 101⁄4”

•

RAD-162

Radial repair unit

13” x 411⁄4”

•

RAD-165

Radial repair unit

131⁄8” x 163⁄4”

RAD-168

Radial repair unit

14” x 303⁄8”

•

RAD-175

Radial repair unit

18” x 213⁄4”

RAD-180

Radial repair unit

73⁄4” x 6”

•

RAD-182

Radial repair unit

10” x 71⁄2”

•

RAD-184

Radial repair unit

111⁄2” x 81⁄2”

RAD-185

Radial repair unit

283⁄4” x 207⁄8”

RAD-185+

Radial repair unit 8

283⁄4” x 207⁄8”

RAD-186

Radial repair unit 2

131⁄2” x 93⁄4”

RAD-188

Radial repair unit 2

18” x 111⁄4”

•

RAD-190

Radial repair unit 2

22” x 153⁄8”

•

• •

• • •

•

AUTOMOTIVE TOOLS & ACCESSORIES

169

bias-ply tyre repairs Features : • •

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Part No

170

Description

Injuries Sidewall

Wide selection of bias-ply (cross ply) repair units for applications on passenger, truck, OTR, agricultural and industrial bias-ply tires. Suitable for use with all current vulcanizing systems.

Tread, Shoulder

Size

Plies

Qty / Box

Qty / Case/

PN-o0

BIAS repair unit PN-o0

•

19⁄16”

200

•

PN-o1

BIAS repair unit PN-o1

•

21⁄2”

120

•

PN-o2

BIAS repair unit PN-o2

•

31⁄4”

•

PN-o3

BIAS repair unit PN-o3

•

4”

•

PN-o4

BIAS repair unit PN-o4

•

53⁄4”

PN-o5

BIAS repair unit PN-o5

•

61⁄2”

•

91⁄4”

•

91⁄4”

•

113⁄4”

•

113⁄4”

•

131⁄2”

•

131⁄2”

•

151⁄2”

•

151⁄2”

•

173⁄4”

•

173⁄4”

•

PN-o5S

BIAS repair unit PN-o5S

PN-o6

BIAS repair unit PN-o6

PN-o6S

BIAS repair unit PN-o6S

PN-o7

BIAS repair unit PN-o7

• • •

• •

PN-o7S

BIAS repair unit PN-o7S

PN-o8

BIAS repair unit PN-o8

PN-o8S

BIAS repair unit PN-o8S

PN-o9

BIAS repair unit PN-o9

PN-o9S

BIAS repair unit PN-o9S

PN-o10

BIAS repair unit PN-o10

PN-o10S

BIAS repair unit PN-o10S

PN-o20

BIAS repair unit PN-o20

•

10”

PN-o21

BIAS repair unit PN-o21

•

141⁄2”

•

PN-o22

BIAS repair unit PN-o22

•

20”

•

• • • • •

PN-o23

BIAS repair unit PN-o23

•

10”

PN-o24

BIAS repair unit PN-o24

•

141⁄2”

•

PN-o25

BIAS repair unit PN-o25

•

20”

•

PN-o40

BIAS repair unit PN-o40

•

7”

•

PN-o41

BIAS repair unit PN-o41

•

83⁄4”

•

PN-o42

BIAS repair unit PN-o42

•

101⁄4”

•

AUTOMOTIVE TOOLS & ACCESSORIES

•

tube patches 100mm

75mm

Features: • •

These patches are high quality, used for all kinds of tubes. On inflation the patch stretches in all directions equally.

50mm 42mm

32mm

Ref.

Diameter

Qty / Box

HM-0032

32 mm

108

HM-0042

42 mm

HM-0050

50 mm

HM-0060

60 mm

HM-0075

75 mm

HM-0100

100 mm

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

60mm

vulcanizing cements

BL-8

BL-32

38188

35188 AUTOMOTIVE TOOLS & ACCESSORIES

171

metal “t” handle split eye tool

seal string

HM-3922 200 1103

Features : • •

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Features • • •

Temporary repairs to tread punctures Suitable for passenger car or truck tyres.

Ref. 200 1103

Length

Qty / Box

8”

Durable metal T handle design. Chrome-Molybdenum steel tip. Changeable tip design.

Ref.

Tip length

HM-3922

48 mm

HM-3922L

73 mm

split eye tip

“t” handle split eye tool

Features

T-384

•

Chrome-Molybdenum steel tip.

Ref.

Length

Ref.

Length

T-384

73 mm

HM-39221

73 mm

HM-3922L1

98 mm

“t” handle rasp eye tool

roller stitcher

P-4109

HM-3460

Features •

172

HM-3922L

Features • •

Chrome-Molybdenum steel tip.

Wood handle for light and portable. Bearing inside for using easier.

Ref.

Length

Ref.

Width

P-4109

72 mm

HM-3460

2 mm

AUTOMOTIVE TOOLS & ACCESSORIES

snap-in tubeless valves for Passenger Car

TR 413

TR 414

Ref.

TR 415

TR 418

TR-413

30.2

TR-414

37.2

TR-415

30.2

43.7

TR-418 Dimension in millimeters

tubeless tyre valves for Truck and Bus

α°

Ref.

α°

1425

1426

1427

1428

1429

1430

1432

1433

1434

1417

1424

1423

103

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Dimension in millimeters

AUTOMOTIVE TOOLS & ACCESSORIES

173

tubeless tyre valves for Truck and Bus

α°

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Ref.

α°

1075A

23.8

1076A

23.8

1077A

23.8

1078A

23.8

1175A

23.8

1177A

23.8

1179A

23.8

Dimension in millimeters

air-water tyre valves

for Tractors

for Tractors, Tubeless Type

B A

α°

D1 A

586

Features: •

Valves with rubber base prepared for cold or hot application to the tube

Ref.

2210

586

12.2

2211

110

587

12.2

115

588

116

12.2

589

12.2

115

Dimension in millimeters

174

587

AUTOMOTIVE TOOLS & ACCESSORIES

α°

large bore tyre valves Tubeless Type, Swivel American Type

α°

1520

1521 B

Ref.

1520

12.6

α° -

1521

12.6

100

1522

119

12.6

1523

140

12.6

1524

12.6

106

1525

102

12.6

100

1529

12.6

100

Dimension in millimeters

rigid valve extension

flexible valve extension for Large Bore Tyre Valve

310

1585

Ref.

Length

Ref.

Length

310

100 mm

1585

140 mm

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Valve caps Large Bore

132

Features: •

Large bore hexagonal cap.

131

Features: •

Large bore cap with screwdriver top.

1550

Features: •

The adapter converts large bore valve end to standard bore valve end.

AUTOMOTIVE TOOLS & ACCESSORIES

175

valve threads repair tool

valve threads repair tool Large Bore

H-205

H-206

Features: 2.4 WHEEL REPAIR TOOLS & ACCESSORIES

•

Features: •

Repairs and reconditions inside and outside valve threads, inserts and removes cores.

valve core remover / installer tool

tyre tread depth gauge

H-241

Features: •

For installation and removal of standard valve cores.

valve installation tool

H-1450

Features: • • •

176

Repairs and reconditions inside and outside valve threads, inserts and removes cores.

Mounting rubber snap in valves on passenger cars. Ruggedly constructed steel tool is designed to provide sure-grip and leverage necessary for positioning seating or removal of snap in type valves. Deep thread head assures ease of valve stem attachment.

AUTOMOTIVE TOOLS & ACCESSORIES

TDG16C01

Features: •

Easy to read, it provides accurate measurement of tread 1-26mm and has a handy pocket clip.

tyre regroover Features: • • •

Cuts in automatically when pressing down blade for cutting operations and switches off upon release of pressure. Interchangeable double-ground blades ensure neat cuts and ready chip flow. The Rillfit Power-Transformer is adjustable to the blades resistance values in 4 different control steps. Thus the blade is fed to exact amount of energy it’s size requires order to heat through. The negligible weight of the acting set plus the advantage that each blade is heated according to it’s size make possible easy effortless cuts even where deep cuts are necessary or the widest type blades are being used.

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

•

Rillfit®4

regroover blade

R Series

W Series

Ref.

Description

Cutting width

Max. cutting depth

Qty / Box

R-1

R Fix 1

3 - 4 mm

7 mm

R-2

R Fix 2

5 - 6 mm

8 mm

R-3

R Fix 3

6 - 8 mm

10 mm

R-4

R Fix 4

9 - 10 mm

14 mm

R-5

R Fix 5

10 - 14 mm

16 mm

W-1

W Fix 1

3 - 4 mm

7 mm

W-2

W Fix 2

5 - 6 mm

8 mm

W-3

W Fix 3

6 - 8 mm

10 mm

W-4

W Fix 4

9 - 10 mm

14 mm

W-5

W Fix 5

10 - 14 mm

16 mm

W-6

W Fix 6

17 - 20 mm

16 mm

AUTOMOTIVE TOOLS & ACCESSORIES

177

tyre lever

tyre lever for Trucks

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

TLW600

Ref.

TL-24

Length

TLW600

24”

Ref.

Length

TL-24

24”

tyre separation tool

kent tool

Features: •

Suitable for disassemble tubeless tyre and rim.

T-45A T315-A

Ref. T-45A

178

AUTOMOTIVE TOOLS & ACCESSORIES

Length 45”

Ref.

Weight

T315-A

6.3 kg

tyre separation tool

tyre impact tool Features: •

Suitable for release the gap of tyre edge and rim.

T315-B

Features:

Suitable for disassemble or assemble tubeless tyre and rim.

Ref.

Weight

Ref.

Description

Weight

11 kg

TO-A

Long

11.5 kg

TO-B

Short

11 kg

T315-B

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

•

special tyre rim remover device

SD-25A

Ref. SD-25A

Capacity

Air Pressure

Weight

10 ton

9 - 15 bar

24 kg

AUTOMOTIVE TOOLS & ACCESSORIES

179

balancing weight

for Passenger Cars, Steel Rims

for Passenger Cars, Alloy Rims

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

Size in Gr.

Qty / Box

5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60

Size in Gr.

100

balancing weight

Qty / Box

5, 10, 15, 20, 25, 30, 35, 40, 45, 50

100

balancing weight

for Trucks, Steel Rims

for Light Trucks, Steel Rims

Size in Gr.

Qty / Box

50, 100, 150, 200, 250, 300

Size in Gr.

adhesive weight

Qty / Box

50, 55, 60, 65, 70, 75, 80

wheel balancing plier

for Passenger Car

W01

Features: •

Size in Gr. 60

180

AUTOMOTIVE TOOLS & ACCESSORIES

Adhesive weights with 12 x 5gr. segments. Qty / Box 100

Features: •

Easily removes and replaces wheel weights, as well as cutting and crimping.

camber nuts & washer

CN-01

CN-02

CN-03

CN-04

wheel spacer

WS-05

WS-07

centre cone

WS-44

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

CW-01

1.25/1.5 LUSSO

master key

CH-03

CH-04

MK-01

AUTOMOTIVE TOOLS & ACCESSORIES

181

wheel lock nut

2.4 WHEEL REPAIR TOOLS & ACCESSORIES

WL-01

WL-02

WL-03

WL-04

wheel lug nut

WN-01

WN-04

WN-03

WN-02

WN-05

WN-06

WN-07

WN-08

wheel cap

WC-01

182

WL-05

AUTOMOTIVE TOOLS & ACCESSORIES

WC-02

WC-03

WC-04

AUTOMOTIVE TOOLS & ACCESSORIES

HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

2.5 184

187

191

184

188

191

185

189

191

186

190

192

186

191

192

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

hydraulic bottle jacks

T90504

T91204

Ref.

Capacity

Min. height

Max. height

Adjusting height

Weight

T90504

5 ton

216 mm

413 mm

70 mm

4.8 kg

T91204

12 ton

230 mm

465 mm

80 mm

8 kg

T93007

30 ton

240 mm

370 mm

21 kg

hydraulic bottle jacks

hydraulic pneumatic bottle jacks

Low Profile

TRA3312

TRA3320

STH-20B

Capacity

Min. height

Max. height

Adjusting height

Weight

TRA3312

12 ton

171 mm

340 mm

76 mm

6.4 kg

TRA3320

20 ton

181 mm

305 mm

38 mm

10 kg

Ref.

184

T93007

AUTOMOTIVE TOOLS & ACCESSORIES

Ref.

ST-30B

Capacity

Min. height

Max. height

Weight

STH-20B

20 ton

210 mm

476 mm

13.5 kg

ST-30B

30 ton

210 mm

515 mm

22 kg

TQ20002

Ref.

TQ30002

Capacity

Min. height

Max. height

Adjusting height

TQ20002

20 ton

265 mm

510 mm

80 mm

Weight 19 kg

TQ30002

30 ton

280 mm

470 mm

26 kg

center piece air jack

SEJ130

Ref. SEJ130 JAC105P

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

hydraulic pneumatic bottle jacks

JAC105P

Capacity 2.5 ton 2 ton

AUTOMOTIVE TOOLS & ACCESSORIES

185

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

jack stand

2 ton hydraulic jacks

T43001 T46001

Ref.

SJ-20S-3

Capacity

Min. height

Max. height

Weight

T43001

3 ton

285 mm

425 mm

4.9 kg/pair

T46001

6 ton

395 mm

605 mm

12.8 kg/pair

2 ton mini trolley jack

Ref.

Capacity

Min. height

Max. height

Weight

2 ton

121 mm

481 mm

33 kg

SJ-20S-3

2 ton aluminium racing jacks Low Profile, Quicklift

T820009L

T825010C

Ref. T825010C

186

Capacity

Min. height

Max. height

Weight

Ref.

2 ton

130 mm

245 mm

9.8 kg

T820009L

AUTOMOTIVE TOOLS & ACCESSORIES

Capacity

Min. height

Max. height

Weight

2 ton

90 mm

440 mm

19 kg

GT-3SP Ref.

hydraulic long floor jack

GT-3DP Capacity

Min. height

Max. height

Weight

Capacity

Min. height

Max. height

GT-3SP

3 ton

125 mm

480 mm

39 kg

TR50001

5 ton

150 mm

560 mm

95 kg

GT-3DP

3 ton

125 mm

455 mm

31 kg

TR100001

10 ton

160 mm

560 mm

145 kg

hydraulic long floor jack

Ref.

Weight

hydraulic long floor jack Low Profile

GT-2T GT-5T

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

3 ton hydraulic jacks

TRA8056AQ GT-10T TRA8106AQ

Ref.

Capacity

Min. height

Max. height

Weight

Capacity

Min. height

Max. height

Weight

GT-2T

2 ton

75 mm

465 mm

35 kg

TRA8056AQ

5 ton

150 mm

560 mm

100 kg

GT-5T

5 ton

150 mm

583 mm

90 kg

TRA8106AQ

10 ton

160 mm

560 mm

148 kg

GT-10T

10 ton

170 mm

576 mm

145 kg

Ref.

AUTOMOTIVE TOOLS & ACCESSORIES

187

air operated hydraulic jacks

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

STC-30L

Ref.

STC-50L

Capacity

Min. height

Max. height

Weight

Capacity

Min. height

Max. height

Weight

STC-30L

30 ton

230 mm

400 mm

46 kg

Ref. TQ22001

22 ton

230 mm

430 mm

47 kg

STC-50L

50 ton

245 mm

485 mm

59 kg

TQ35001

35 ton

257 mm

535 mm

48 kg

Features : • •

3 stages low profile jack. Efficient vacuum system for quick lowering the stages, even without any load.

S 36

188

Features : •

Efficient vacuum system for quick lowering the stages, even without any load.

S 44

Ref.

Capacity

Min. height

Max. height

Weight

S 36

60 ton

175 mm

560 mm

86 kg

S44

40 ton

235 mm

605 mm

61 kg

AUTOMOTIVE TOOLS & ACCESSORIES

air operated hydraulic jacks Low Profile

Ref.

AJ-50T3L

Capacity

Min. height

Max. height

Weight

AJ-35T2FL

35 ton

180 mm

568 mm

43 kg

AJ-50T3L

50 ton

150 mm

525 mm

59 kg

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

AJ-35T2FL

dual wheel dolly

Features: • •

Heavy duty chain for securing the wheels. Tabular lifting arm allows easy adjusted to fit the middle and large size tyres.

TRF9050 TX12001 Ref. TRF9050

Capacity

Working range

Weight

Ref.

0.5 ton

90 - 273 mm

58.5 kg

TX12001

Capacity

Extension length

Weight

1.2 ton

760 mm

160 kg

AUTOMOTIVE TOOLS & ACCESSORIES

189

transmission jack

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

HM-8050A

Ref. HM-8050A

TEL05001

Capacity

Min. height

Max. height

Weight

0.5 ton

870 mm

1800 mm

32 kg

Ref. TEL05001

Capacity

Min. height

Max. height

Weight

0.5 ton

1260 mm

1745 mm

34 kg

TE10001 TJ800

Ref. TJ800

190

Capacity

Min. height

Max. height

Weight

Ref.

0.8 ton

855 mm

1845 mm

76.5 kg

TE10001

AUTOMOTIVE TOOLS & ACCESSORIES

Capacity

Min. height

Max. height

Weight

1 ton

210 mm

780 mm

72.5 kg

engine crane

universal engine support

Features : • T32002X

• •

Features : • •

Fast folding for easy storage and transportation. Heavy duty castors.

Ref. T32002X

•

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panel. Also used as an aid for the removal of gearbox and transmissions. Beams supported on rubber feet and fine-lift control obtained by using a screw mechanism. Supplied with a short length of chain.

Capacity

Lifting range

Weight

Ref.

2 ton

25 - 2000 mm

27.5 kg

C3611

engine stand

Capacity

Min. height

Max. height

Weight

3 ton

89 mm

457 mm

36.6 kg

frame straightener

Features: • •

Accepts a wide variety of engines and transmission. Fully adjustable mounting arms.

T25671

Ref. T25671

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

C3611

TW10001

Capacity

Weight

Ref.

0.5 ton

27.5 kg

TW10001

Capacity 10 ton

AUTOMOTIVE TOOLS & ACCESSORIES

191

hydraulic press

Features: • •

2.5 HYDRAULIC TOOLS & GENERAL LIFTING EQUIPMENT

•

LS40

LS20

air operated hydraulic pump

A3036

Ref. A3036

192

Capacity

Weight

1600 cc

8.5 kg

AUTOMOTIVE TOOLS & ACCESSORIES

Designed for repair small motors, removing & installing heavy parts such as gears, bearing and other press fit parts. Heavy duty returns spring for fast ram retraction. Reinforced head plate with arbor plates.

Ref.

Capacity

LS20

20 ton

LS40

40 ton

AUTOMOTIVE TOOLS & ACCESSORIES

PNEUMATIC TOOLS & ACCESSORIES

2.6 194

197

199

201

196

198

199

201

196

198

200

201

196

198

200

201

197

198

200

201

202

ENCLOSED AIR HOSE REEL Features: • •

Features: •

Enclosed hose reel equipped with swivelling wall support. Suitable for air & water. SUPER

•

Air hose reel equipped with pressure gauge ø 60 mm with scale 0 - 10 bar. Constant connection to the compressed air system makes the inflation system always ready for use. Equipped with quick hooking system to the wall support to facilitate possible moving.

89109

The trip enables automatic stopping at the desired length.

Rewinding spring Fluid conveyor joint

320

110

165 132

242 206

390

285

2.6 PNEUMATIC TOOLS & ACCESSORIES

52010

Adjustable hose-stop

Self-lubricating tube guide rollers

The easy to install adjustable bracket with bayonet coupling allows the hose-reel to be removed very easily.

Ref.

AUTOMOTIVE TOOLS & ACCESSORIES

52010

11 m

Max. working pressure

20 bar

10 bar

Type app. 0-10 bar

Pressure gauge ø60 mm

194

89109

Hose length

ENCLOSED AIR HOSE REEL Features: • • •

Ref.

92608.101

92608.102

93108.102

93108.103

12 m

10 m

12 m

15 m

Inlet

M 3/8”G

Outlet

M 1/4”G

M 3/8”G

M 1/4”G

Hose length Connection

93108.102 93108.103

2.6 PNEUMATIC TOOLS & ACCESSORIES

92608.101 92608.102

Painted steel. Enclosed hose reel equipped with swivelling wall support. Suitable for air & water.

Air & Electric Hose Reel

HB-2

Ref. Measurement

HB-3

HB-4

HB-2

HB-3

HB-4

358 x 337 x 473 mm

537 x 337 x 473 mm

716 x 337 x 473 mm

AUTOMOTIVE TOOLS & ACCESSORIES

195

PORTABLE TYRE INFLATOR Tips

The tyre inflation and deflating operations are done with single 3-position lever

52013

In order to have the tyre inflator always ready for use, just place it on the automatic charger as shown in the illustration

Ref.

52013

Tank capacity 770

Features: •

2.6 PNEUMATIC TOOLS & ACCESSORIES

•

13 L

Max. tank pressure

10 bar

Calibrated safety valve

Tyre inflator for checking and restoring the pressure of tyre. Automatic charging device for always being ready for use (indispensable and handy at service stations).

10 bar

Manometer ø50 tank pressure

0-10 bar

Max. working pressure 310

Coiled Hose

7 bar

Manometer ø80 working pressure

Type-approved to 0-10 bar

Double head inflating hose

1.2 m

air hose

Polyurethane

HA5210

Ref.

196

HA5210

Ref.

Nominal inch

Coil length

Length

2.5 m

RMD 1006

1/4”

100 m

Fittings

R 1/4

RMD 1008

5/16”

100 m

RMD 1010

3/8”

100 m

RMD 1013

1/2”

100 m

AUTOMOTIVE TOOLS & ACCESSORIES

indoor tyre inflator

aerator auxiliary tank

TA-2

QUBE

Features:

Pressure boost for tubeless tyre.

Ref.

TA-2

Ref.

Capacity

20 L

Accuracy

6 bar

Reading accuracy

13.6 kg

Max. Inlet Pressure

Max. working pressure Weight

Inflation flow

fORECOURT tyre inflator

Accuracy

15 bar 2,500 l/min @ 10 bar supply

for Tyreshop

A10

D10

A10

± 0.5% of full scale reading

D12

Ref. Accuracy

Reading accuracy

0.1 bar

Reading accuracy

Max. Inlet Pressure

16 bar

Max. Inlet Pressure

Inflation flow

0.1 bar

High Flow tyre inflator

D10

Ref.

QUBE ± 0.5% of full scale reading

400 l/min @ 10 bar supply

2.6 PNEUMATIC TOOLS & ACCESSORIES

•

Inflation flow

D12 ± 0.5% of full scale reading 0.1 bar 15 bar 2,500 l/min @ 10 bar supply

AUTOMOTIVE TOOLS & ACCESSORIES

197

Handheld tyre inflator

tyre inflator safety cage Features: • •

ACCURA Ref.

Accura

2.6 PNEUMATIC TOOLS & ACCESSORIES

Accuracy

AirForce

Exceeds EC Directive 86/217

Reading accuracy

0.1 bar

Max. Inlet Pressure

15 bar

Inflation flow

Truckbox 54 Ref.

Truckbox 54

Max. wheel diameter

1250 mm

Max. wheel width

650 mm

910 l/min @ 10 bar supply

tyre air chuck

6568-L

198

AirForce

Truck and bus steel safety cage for inflating tyre. Complete with pressure limiting device.

clip-on air chuck

CO8H72 HP-6

C02J03

CO1B03

Ref.

Length

Ref.

HP-6

230 mm

CO8H72

1/4”

6568-L

355 mm

CO2J03

1/4”

CO1B03

233 mm

AUTOMOTIVE TOOLS & ACCESSORIES

Inlet Size

tube deflator

tyre pressure gauge set Features: • • 1850

Low Pressure for Passenger Cars. 4 sided nylon bar, calibrated 10‑50 psi in 1psi units.

905

1038

Features: • • •

Dual Foot Service Gauge Calibrated 10-150psi in 2psi units. 2 sided metal bar.

1048

Features: • • • •

Dual Straight Chuck Service Gauge. Has straight chuck for inside wheels and 30° reverse angle for outside wheels. Calibrated 10-150 psi in 2 psi units. 2 sided metal bar

TPG57

Features: • •

Suitable for all cars and commercial vehicles. Fitted with an extra large filter to protect the quality mechanism.

TPG4

Features: •

•

Incorporates a self-adjusting friction device which enables the pressure to be read when the gauge is removed from the valve. Twin headed gauge is suitable for commercial vehicles

2.6 PNEUMATIC TOOLS & ACCESSORIES

tyre pressure gauge

Features: •

• TPG3H01

• •

Incorporates a self-adjusting friction device which enables the pressure to be read when the tyre pressure gauge is removed from the tyre valve. A positive sealing washer ensures reliability. Integral pocket clip and removable protective cap. Angled head is designed to fit onto the valve at 90°.

AUTOMOTIVE TOOLS & ACCESSORIES

199

1/2” air impact wrench

3/4” air impact wrench

AV231 AV9136

SK231

Working pressure

Max. torque

Speed

Weight

Ref.

SK231

6 bar

550 nm

7000 rpm

2.65 kg

AV9136

AV231

6 bar

600 nm

8000 rpm

2.45 kg

AV9061

6 bar

400 nm

12500 rpm

1.50 kg

Ref.

2.6 PNEUMATIC TOOLS & ACCESSORIES

AV9061

1” air impact wrench

Working pressure

Max. torque

Speed

Weight

6 bar

1500 nm

7500 rpm

2.7 kg

1/2” air ratchet

AV1077

AV1033

HT-550GL

Ref. HT-550GL

200

Working pressure

Max. torque

Speed

Weight

Ref.

6 bar

2700 nm

2900 rpm

15.5 kg

AUTOMOTIVE TOOLS & ACCESSORIES

Working pressure

Max. torque

Speed

Weight

AV1077

6 bar

108 nm

160 rpm

1.2 kg

AV1033

6 bar

34 NM

200 rpm

0.5 kg

die grinder

brushes

TSE-10 TC201 Working pressure

Speed

Weight

Ref.

6 bar

22000 rpm

0.6 kg

TCO-35

75 mm

TSE-10

25 mm

contour wheel

Diameter

air blow gun

TA04-1

007

Ref.

Diameter

007

50 mm

Ref.

Tip length

TA04-1

4”

Nitrogen Analyser

2.6 PNEUMATIC TOOLS & ACCESSORIES

Ref. TC201

TCO-35

Features: • • • • • • •

Accurate and easy to use. Compact and ergonomic design. Simple to operate - one button operation. Battery charge indicator. Auto-power off function. Replaceable battery and sensor. Auto diagnostic with Error Code to simplify troubleshooting

N2A001

AUTOMOTIVE TOOLS & ACCESSORIES

201

universal purpose couplings for Air Line

Features: • • •

Excellent durability. An excellent general purpose coupling for connecting factory air supply to pneumatic tools. Critical structural parts of steel models are heat-treated for increased strength giving greater durability and resistance to wear.

2.6 PNEUMATIC TOOLS & ACCESSORIES

SH Type

SF Type

Ref.

Application (Hose)

Ref.

Application

20SH

1/4”

20SF

R 1/4

30SH

3/8”

30SF

R 3/8

40SH

1/2”

40SF

R 1/2

SM Type

Ref.

PH Type

Application (Hose)

Ref.

Application (Hose)

10SM

Rc 1/8

20PH

1/4”

20SM

Rc 1/4

30PH

3/8”

30SM

Rc 3/8

40PH

1/2”

40SM

Rc 1/2

PM Type Ref.

202

PF Type Application

Ref.

Application

10PM

Rc 1/8

20PF

R 1/4

20PM

Rc 1/4

30PF

R 3/8

30PM

Rc 3/8

40PF

R 1/2

40PM

Rc 1/2

AUTOMOTIVE TOOLS & ACCESSORIES

SOCKETS & WRENCHES

2.7 204

206

210

214

204

208

210

216

205

209

211

217

205

209

212

217

205

210

213

open end wrench

offset ring wrench

S2 S1

S2 L

Dimension in millimeters

Ref.

S1 x S2

Ref.

S1 x S2

05T-2030

6x7

123

08T-204M

6x8

168

8x9

140

08T-206M

8x9

183

8 x 10

140

08T-207M

8 x 10

183

05T-2080

10 x 11

156

08T-208M

10 x 11

198

05T-2090

10 x 12

156

08T-209M

10 x 12

198

05T-2120

12 x 13

172

08T-212M

12 x 13

217

05T-2130

12 x 14

180

08T-213M

12 x 14

217

05T-2180

14 x 15

190

08T-218M

14 x 15

239

05T-2190

14 x 17

190

08T-220M

14 x 17

260

05T-2230

17 x 19

221

08T-221M

16 x 17

260

05T-2240

18 x 19

221

08T-223M

17 x 19

292

05T-2340

22 x 24

247

08T-224M

18 x 19

292

05T-2380

24 x 27

259

08T-227M

19 x 21

318

05T-2480

30 x 32

298

08T-230M

20 x 22

318

08T-231M

21 x 23

326

08T-232M

22 x 24

326

08T-238M

24 x 27

329

08T-248M

30 x 32

362

2.7 SOCKETS & WRENCHES

05T-2060 05T-2070

204

AUTOMOTIVE TOOLS & ACCESSORIES

combination wrench

swivel socket wrench

Dimension in millimeters

Ref.

2060

102

KTDFS-0809

S1x S2

8x9

180

2070

112

2080

122

KTDFS-0810

8 x 10

184

KTDFS-1011

10 x 11

2090

200

132

KTDFS-1012

10 x 12

2100

205

140

KTDFS-1213

12 x 13

220

2110

150

KTDFS-1214

12 x 14

225

2120

160

KTDFS-1415

14 x 15

242

2130

170

KTDFS-1617

16 x 17

254

2140

180

KTDFS-1719

17 x 19

260

2150

190

KTDFS-1819

18 x 19

275

2160

200

210

220

2190

230

2200

245

2210

250 260

2220

2230

270

2240

280

2250

290

2260

300

2270

310

2280

320

2290

330

2300

340

2320

360

double end flare nut wrench 2.7 SOCKETS & WRENCHES

2170 2180

Ref.

S2170 Dimension in millimeters Ref. S2170

Contents 8-9, 10-11,10-12, 11-13, 12-14, 14-17

AUTOMOTIVE TOOLS & ACCESSORIES

205

1/2” sockets

Standard Length, Hex

Deep Length, Hex

C B

2.7 SOCKETS & WRENCHES

Dimension in millimeters

206

C B

Dimension in millimeters

Ref.

62208K

12.1

21.8

62508K

12.1

62209K

13.4

21.8

62509K

13.4

62210K

15.4

21.8

62510K

15.4

62211K

16.6

21.8

62511K

16.6

62212K

17.9

21.8

62512K

17.9

62213K

19.1

21.8

62513K

19.1

62214K

20.4

21.8

62514K

20.4

62215K

62515K

62216K

22.3

62516K

22.3

62217K

62517K

62218K

62518K

62219K

62519K

62220K

62520K

62221K

62521K

62222K

62522K

62223K

31.8

62523K

31.8

62224K

62524K

62225K

62525K

62226K

62526K

62227K

62527K

62228K

62528K

62229K

62529K

62230K

62530K

62231K

62531K

62232K

62532K

AUTOMOTIVE TOOLS & ACCESSORIES

spark plug sockets

1/2” torx® sockets

Hex

B A

Dimension in millimeters

C B

Dimension in millimeters

Ref.

62321K

63325010

E10

62327K

63325011

E11

63325012

E12

63325014

E14

63325016

E16

63325018

E18

63325020

E20

63325022

E22

63325024

E24

2.7 SOCKETS & WRENCHES

Ref.

AUTOMOTIVE TOOLS & ACCESSORIES

207

1/2” sockets set

TORX® SOCKETS SET

3601301 HM-4243-5 Ref. 3601301

Contents 6 sockets: E4, E5, E6, E7, E8, E10 - 1/4”. 5 sockets: E11, E12, E4, E6, E8 - 3/8”. 2 adaptors: 1/2” x 1/4” & 3/8” x 1/4”.

2.7 SOCKETS & WRENCHES

1/4” & 1/2” COMBINATION SET

4761

208

AUTOMOTIVE TOOLS & ACCESSORIES

Ref.

Contents

4761

Content: 1/4" DR. 13 Socket 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm 1 Ratchet Handle 2 Extension - 2”, 4” 1 Sliding T Handle 1 Universal Joint 1 Spinner - 6” Content: 1/2” DR. 18 Socket 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm 1 Ratchet Handle 2 Spark Plug Socket - 16, 20.6 mm 2 Extension - 5”, 10” 1 Universal Joint 1 Adaptor - 3/8”F x 1/2”M 9 Combination Wrench 8, 10, 11, 12, 13, 14, 17, 19, 22 mm 3 Hex Key - 1.5, 2, 2.5 mm 10 Hex Short Key 1.27, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 10 Hex Ball Point Extra Long Key 1.27, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm

cross wrench

tyre spanner

220025

Ref.

Size

220025

17 x 19 x 21 x 23 mm

foldable cross wrench

Ref.

Size

700 2427

24 x 27 mm

700 2730

27 x 30 mm

700 2732

27 x 32 mm

700 3032

30 x 32 mm

WHEEL MASTER WRENCH

Ref. TRX31201

2.7 SOCKETS & WRENCHES

TRX31201 SK9122N

Size 17 x 19 x 21 x 23 mm

1/2” reversible ratchet

1/2” flexible ratchet

52174K

HM-3014

Ref.

Length

Ref.

Length

52174K

250 mm

HM-3014

280 mm

AUTOMOTIVE TOOLS & ACCESSORIES

209

1/2” sliding “t” handle

1/2” swivel handle

S84623

S84622-15

Ref.

S84623

Ref.

300 mm

S84622-15

1/2” universal joint

L 15”

1/2” extension bar

S82624

Ref. S82624

2.7 SOCKETS & WRENCHES

L 68 mm

1/2” extension bar

Ref.

Length

52151K

75 mm

52153K

125 mm

52157K

250 mm

1/2” universal extension bar

Extra Long

HM-3908

Ref. HM-3908

210

AUTOMOTIVE TOOLS & ACCESSORIES

Length 24”

Ref.

Length

HM-3653

320 mm

HM-3654

600 mm

“t” handle socket wrench

“t” handle swivel socket wrench

Dimension in millimeters

Ref.

HM-3655

300

Ref.

HM-3637

450

HM-3656

300

HM-3638

450

HM-3657

300

HM-3663

450

HM-3658

300

HM-3640

450

HM-3659

300

HM-3641

450

HM-3664

450

HM-3660

300

HM-3661

300

HM-3662

300

1/2” “t” handle swivel socket wrench

2.7 SOCKETS & WRENCHES

spark plug wrench

Dimension in millimeters Ref.

Ref.

Length

HM-3649

450

HM-3651

320 mm

HM-3650

450

HM-3652

600 mm

AUTOMOTIVE TOOLS & ACCESSORIES

211

ballpoint hex key wrench set

torx® key wrench set Tamper Resistant

S2576

S2577

Dimension in millimeters

Ref.

Content

2.7 SOCKETS & WRENCHES

hex key wrench set

S2576

Content

S2577

torx® key wrench set

Tamper Resistant

S2552

Ref.

212

Ref.

1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

S2576

T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H

torx® key wrench set

S2558

Content 2.5, 3, 4, 5, 6, 7, 8, 10

AUTOMOTIVE TOOLS & ACCESSORIES

Ref. S2558

S2554

Content T9H, 10H, 15H, 20H, 25H, 27H, 30H, T40H

Ref. S2554

Content T9, T10, T15, T20, T25, T27, T30, T40

power bit set

power bit & socket set

SK-4401

SL-176

Ref.

Contents

4731

13 Star Key T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70 4 Star Wrench - E6xE8, E10xE12, E14xE18, E20xE24 7 1/2” DR. Star Socket E12, E14, E16, E18, E20, E22, E24 7 1/4” DR. Star Socket - E4, E5, E6, E7, E8, E10, E11 6 1/2” DR. Star Socket T30, T40, T45, T50, T55, T60 (55mmL) 6 1/4” DR. Star Socket T8, T10, T15, T20, T25, T27 (32mmL) 10 Star Tamperproof Bit (10mm) T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H, T55H (30mmL) 10 Star Bit (10mm) T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (75mmL) 1 Bit Holder - 1/2” DR. x 10mm 9 Tamperproof Screwdriver T6H, T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H

4731

AUTOMOTIVE TOOLS & ACCESSORIES

2.7 SOCKETS & WRENCHES

Star socket & bit set

213

1/2” impact sockets

Standard Length, Hex

Standard Length, Bihex

A A B

2.7 SOCKETS & WRENCHES

Dimension in millimeters

214

C L

C B

Dimension in millimeters

Ref.

60720008

63825008

60720009

63825009

60720010

63825010

60720011

17.5

63825011

60720012

63825012

60720013

63825013

60720014

63825014

60720015

63825015

60720016

63825016

60720017

63825017

60720018

63825018

60720019

63825019

60520020

63825020

60520021

63825021

60520022

63825022

60520023

63825023

60520024

63825024

60520025

63825025

60520026

63825026

60520027

38.7

63825027

60520028

63825028

60520029

63825029

60520030

63825030

60520031

63825032

60520032

63825033

60520033

63825036

60520035

60520036

AUTOMOTIVE TOOLS & ACCESSORIES

1/2” impact sockets

Deep Length, Hex

Deep Length, Extra Thin, Hex

C B

Dimension in millimeters

C B

Dimension in millimeters

Ref.

60522008

61122017

60522009

61122019

60522010

17.5

61122021

60522011

18.7

60522012

60522013

60522014

22.5

60522015

23.7

60522016

60522017

60522018

27.5

60522019

28.7

60522020

60522021

60522022

60522023

60522024

60522025

60522026

Ref.

60522027

38.7

63325010

60522028

63325011

E11

60522029

63325012

E12

60522030

63325014

E14

60522031

63325016

E16

18.5

60522032

63325018

E18

20.5

60522033

63325020

E20

22.5

60522035

63325022

E22

24.5

60522036

63325024

E24

26.5

1/2” impact sockets Standard Length, Thin, TORX®

C L

Dimension in millimeters S

E10

AUTOMOTIVE TOOLS & ACCESSORIES

2.7 SOCKETS & WRENCHES

215

1/2” impact sockets

with Hex Bit

with TORX® Bit

S L1

A L

2.7 SOCKETS & WRENCHES

Dimension in millimeters

216

Dimension in millimeters

Ref.

64826004

64721020

T20

64826005

64722020

T20

64826006

64721025

T25

64826007

64722025

T25

64826008

64721027

T27

64826009

64722027

T27

64826010

64721030

T30

64826011

64722030

T30

64826012

64721040

T40

64826013

64722040

T40

64826014

64721045

T45

64826015

64722045

T45

64826016

64721047

T47

64826017

64722047

T47

64826018

64721050

T50

64826019

64722050

T50

64721055

T55

64722055

T55

64721060

T60

64722060

T60

64721070

T70

64722070

T70

AUTOMOTIVE TOOLS & ACCESSORIES

1/2” impact EXTENSION BAR

1/2” TO 3/4” INCREASING ADAPTOR

A A L

Dimension in millimeters

Dimension in millimeters A

Ref.

64521075

64021024

64521100

100

64521125

125

64521150

150

64521175

175

64521200

200

64521250

250

64521300

300

64521460

460

64521610

610

64521915

915

2.7 SOCKETS & WRENCHES

Ref.

AUTOMOTIVE TOOLS & ACCESSORIES

217

3/4” impact sockets Standard Length, Hex

C B

2.7 SOCKETS & WRENCHES

Dimension in millimeters

218

Ref .

60140013

60140040

60140014

25.5

60140041

60140015

60140042

60140016

27.5

60540043

60140017

28.5

60540044

60140018

29.5

60540045

60140019

60540046

60140020

60540047

60140021

60540048

60140022

60540049

60140023

60540050

60140024

60540052

60140025

60540054

60140026

60540055

60140027

60540056

60140028

60540060

60140029

60540063

60140030

60540065

60140031

60540067

60140032

60140033

60140034

60140035

60140036

60140037

60140038

60140039

AUTOMOTIVE TOOLS & ACCESSORIES

3/4” impact sockets Standard Length, Bihex

C B

Dimension in millimeters Ref.

Ref.

63845013

63845041

63845014

63845042

63845015

63845043

63845016

63845046

63845017

63845050

63845018

63845055

63845019

63845056

63845020

63845060

63845021

63845063

63845065

63845067

63845024

63845025

63845026

63845027

63845028

63845029

63845030

63845031

63845032

63845033

63845034

63845035

63845036

63845037

63845038

63845039

2.7 SOCKETS & WRENCHES

63845022 63845023

AUTOMOTIVE TOOLS & ACCESSORIES

219

3/4” impact sockets Deep Length, Hex

C B

2.7 SOCKETS & WRENCHES

Dimension in millimeters

220

Ref.

60542013

60542041

60542014

60542042

60542015

60542043

60542016

60542044

60542017

60542046

60542018

60542047

60542019

60542048

60542020

60542049

60542021

60542050

60542022

60542052

60542023

60542055

100

60542024

60542060

105

60542025

60542065

105

60542026

60542027

60542028

60542029

60542030

60542031

60542032

60542033

60542034

60542035

60542036

60542037

60542038

60542039

60542040

AUTOMOTIVE TOOLS & ACCESSORIES

3/4” impact extension bar

3/4” impact sockets with Hex Bit

B A

A L

Dimension in millimeters Ref.

64846010

100

64846012

100

64846014

100

64846017

100

64541150

64846019

100

64541175

175

64846022

100

64541200

200

64846024

100

64541250

250

64846027

100

64541300

300

64541330

330

64541400

400

6454175

64541100

100

64541125

125

150

3/4” to 1/2” reducing adaptor 2.7 SOCKETS & WRENCHES

3/4” to 1” increasing adaptor

Ref.

Note: Due to the special working conditions of this adaptor, it is not guaranteed against male failure. A

Ref.

64041100

64041016

AUTOMOTIVE TOOLS & ACCESSORIES

221

1” impact sockets Standard Length, Hex

C B

2.7 SOCKETS & WRENCHES

Dimension in millimeters

222

Ref.

60150017

60150046

60150018

60150047

60150019

60150048

60150020

60150050

60150021

60150051

60150022

60150052

60150023

60150053

60150024

60150054

60150025

60150055

60150026

42.5

60150056

60150027

60150057

60150028

60150058

60150029

60150060

60150030

60150063

60150031

60150065

60150032

60150067

60150033

60150070

60150034

60150071

100

60150035

60550075

104

60150036

60550080

109

100

60150037

60550085

115

100

60150038

60550090

125

105

60150039

60550095

130

105

60150040

60550100

100

137

105

60150041

61.5

60550105

105

143

105

60150042

60550110

110

147

105

60150043

60550115

115

152

105

60150044

60150045

AUTOMOTIVE TOOLS & ACCESSORIES

1” impact sockets Deep Length, Hex

C B

Ref.

60552017

100

Ref.

60552046

100

60552018

34.5

100

60552047

100

60552019

35.5

100

60552048

100

60552020

36.5

100

60552050

100

60552021

37.5

100

60552051

100

60552022

100

60552052

100

60552023

100

60552053

100

60552024

100

60552054

100

60552025

100

60552055

100

60552026

44.5

100

60552056

105

60552027

100

60552057

105

60552028

100

60552058

105

60552029

100

60552060

120

60552030

100

60552062

120

60552031

100

60552063

120

60552032

100

60552065

125

60552033

100

60552067

125

60552034

100

60552070

125

60552035

100

60552075

104

135

60552036

100

60552080

109

135

60552037

100

60552085

115

140

60552038

100

60552090

125

140

60552039

100

60552095

130

140

60552040

100

60552100

100

137

140

60552041

100

60552105

105

143

100

155

60552042

100

60552110

110

147

100

155

60552115

115

152

100

155

60552043

100

60552044

100

60552045

100

AUTOMOTIVE TOOLS & ACCESSORIES

2.7 SOCKETS & WRENCHES

Dimension in millimeters

223

1” impact sockets

1” impact sockets Semi Deep Length, Hex

Extra Long Length, Hex

C B

Dimension in millimeters

C B

Dimension in millimeters Ref. S

Ref.

60751027

60559024

270

60751030

60559026

270

60751032

60559027

270

60751033

60559030

270

60751035

60559032

60751036

60559033

60751038

60751041

1” impact extension bar

1” impact sockets with Hex Bit

A S

2.7 SOCKETS & WRENCHES

224

A L

Dimension in millimeters

Dimension in millimeters Ref.

Ref.

64551075

64551200

200

64551100

100

64551250

250

64551125

125

64551300

300

64551150

150

64551330

330

64551175

175

64551400

400

Ref.

64856010

100

64856012

100

64856014

100

64856017

100

64856019

100

64856022

100

64857022

140

64856024

100

Ref.

64856027

100

64041016

AUTOMOTIVE TOOLS & ACCESSORIES

1” to 3/4” reducing adaptor Note: Due to the special working conditions of this adaptor, it is not guaranteed against male failure.

A L

Dimension in millimeters

AUTOMOTIVE TOOLS & ACCESSORIES

GENERAL TOOLS

2.8 226

241

242

244

245

227

241

242

244

246

228

242

243

244

246

230

242

243

245

240

242

243

245

portable drawer tool box

tool chest

TBD133-X

TBT3003-X

Features • •

3 drawers with ball bearing slides 448x189x54 mm. Central locking.

Ref. TBD133-X

•

4 drawers with ball bearing slides. 3 drawers 589x279x48 mm. 1 drawer 589x279x100.5 mm. Central locking.

•

3 drawers with ball bearing slides. 1 drawer 589x279x48 mm. 2 drawers 589x279x100.5 mm. Central locking.

Weight

Ref.

Dimension

Weight

9.4 kg

TBT3003-X

668 x 316 x 386 mm

23.5 kg

TBT3004-X

668 x 316 x 386 mm

25.5 kg

2.8 GENERAL TOOLS

226

Feature:

•

Dimension

TBC123B

Features

520 x 218 x 300 mm

5 tray tool box

Ref.

TBT3004-X

Dimension

Weight

525 x 200 x 195 mm

4 kg

AUTOMOTIVE TOOLS & ACCESSORIES

tool carts

TC302

TC301-2-X

Ref.

Dimension

Weight

TC302

730 x 376 x 663 mm

13 kg

TC301-2-X

737 x 383 x 668 mm

20 kg

tool carts

with Sliding Compartment

Features:

2 sliding compartment with rubber worktop. 2 drawers 578x325x60 mm. Central locking.

Only 1 drawer can be pulled out at one time.

TC310 Note: Tools are not included.

Ref. TC310

Dimension

Weight

705 x 370 x 710 mm

27.5 kg

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

• • •

227

tool cabinets

• • •

•

3 drawers with ball bearing slides. 2 drawers 570x410x74.5 mm. 1 drawer 570x410x153.5 mm. 1 panel area 680x458x395 mm. Central locking.

•

TBR4003-X

Ref. TBR4003-X

TBR4005-X

Dimension

Weight

680 x 458 x 860 mm

55 kg

•

2.8 GENERAL TOOLS

•

Ref.

228

7 drawers with ball bearing slides. 4 drawers 589x409x48 mm. 2 drawers 589x409x100.5 mm 1 drawer 589x409x205.5 mm. Central locking.

TBR3007-X

5 drawers with ball bearing slides. 3 drawers 570x410x74.5 mm. 2 drawers 570x410x153.5 mm. Central locking.

Dimension

Weight

688 x 458 x 735 mm

68.5 kg

AUTOMOTIVE TOOLS & ACCESSORIES

Ref. TBR4005-X

Dimension

Weight

680 x 458 x 700 mm

41.7 kg

Tool Cabinets

• • • • • • •

7 drawer. 5 drawers 580x375x60 mm. 2 drawers 580x375x120 mm. Central locking. Dual-material trolley handle. Adjustable height for side tray with full screw track. Strong caster with brake. Plastic corner for protection. Plastic-under drawer handle provides coldness isolation for hand.

T5045

T5055

10217B T4248

T4122

T40612

T2641

T5053

T5056

T5074

T5096

T5122

4th Drawer

T5331

T2142

T5106B 2.8 GENERAL TOOLS

T5085

T5038

3rd Drawer

1st Drawer

T5161

T5043A

2nd Drawer

5th Drawer

AUTOMOTIVE TOOLS & ACCESSORIES

229

14pc screwdriver sET

8pc Screwdriver Set

2142 Ref.

2142

Contents 6 Slotted Screwdriver 3mm (75mmL) 3.5, 4 mm (100mmL) 5.5mm (125mmL) 6.5mm (150mmL) 8mm (175mmL) 2 Slotted Stubby Screwdriver 5.5, 6.5 mm (25mmL) 4 Phillips Screwdriver PH.0 (60mmL) PH.1 (80mmL) PH.2 (100mmL) PH.3 (150mmL) 2 Phillips Stubby Screwdriver PH.1, PH.2 (25mmL)

T2084B Ref.

T2084B

Contents 6 Anti-slip Slotted Screwdriver 3mm (75mmL) 3.5mm (100mmL) 4mm (100mmL) 5.5mm (125mmL) 6.5mm (150mmL) 8mm (175mmL) 2 Anti-slip Phillips Screwdriver PH.1 (80mmL) PH.2 (100mmL)

8pc Screwdriver Set

10pc Hex Ball Point Grip Key Set

2.8 GENERAL TOOLS

T2085YC

Ref.

5106B T2085YC Ref. 5106B

230

Contents 10 Hex Ball Point Grip Key 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12 mm

AUTOMOTIVE TOOLS & ACCESSORIES

Contents 2 Anti-slip Slotted Screwdriver 5.5, 6.5 mm (38mmL) 2 Anti-slip Phillips Screwdriver PH.0 (60mmL) PH.1 (38mmL) 4 Anti-slip Pozidriv Screwdriver PZ.0 (60mmL) PZ.1 (38mmL) PZ.1 (80mmL) PZ.2 (100mmL)

24Pc socket sET

T2641 Ref.

T2641

T3251-72-5 Ref.

Contents Content: 1/4" DR. 14 Flank Socket 3.2, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm 9 Flank Deep Socket 5, 6, 7, 8, 9, 10, 11, 12, 13 mm 24 Socket Bit (32mmL) Hex - 3, 4, 5, 6, 7, 8, 10 mm Phillips - PH.1, PH.2, PH.3 Pozidriv - PZ.1, PZ.2, PZ.3 Slotted - 4, 5.5, 6.5 mm Star - T8, T10, T15, T20, T25, T27, T30, T40 1 Ratchet Handle - 72-teeth 3 Extension - 2", 4", 6" 1 Sliding T Handle 1 Universal Joint 1 Spinner - 6" 1 Magnetic Socket Pick-up 10 Hex Ball Point Key (Long Pattern) 1.27, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm

T3251-72-5

Ref.

52Pc Star Set

T3521

Contents Content: 3/8" DR. 17 Flank Socket 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm 1 Ratchet Handle - 72-teeth 2 Extension - 3", 6" 1 Universal Joint 1 Sliding T Handle 2 Spark Plug Socket - 16, 20.6 mm

Contents Content: 1/4" DR. & 3/8" DR. 13 5/16" Star Bit T20, T25, T30, T40, T45, T50, T55 (30mmL) T20, T25, T30, T40, T45, T50 (75mmL) 5 1/4" DR. Star Socket E4, E5, E6, E7, E8 7 3/8" DR. Star Socket E10, E11, E12, E14, E16, E18, E20 13 Star L Key T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70 9 1/4" Star Tamperproof Bit T-8H, T-10H, T-15H, T-20H, T-25H, T-27H, T-30H, T-35H, T-40H (25mmL) 3 Star Socket Bit T55 (140mmL), T60 (55mmL), T70 (100mmL) 2 Bit Holder - 1/4" DR. x 1/4", 3/8" DR. x 5/16"

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

65pc Socket Combination Set

231

5pc Accessory Set

12pc socket bit set

T4057-24 Ref.

T4057-24

Contents Content: 1/2" DR. 1 Quick-release Ratchet Handle - 72 teeth 2 Extension - 5", 10" 1 Sliding T Handle 1 Universal Joint

6pc Accessory Set

T4122 Ref.

T4122

14pc Flank Deep Socket sET

T40612 2.8 GENERAL TOOLS

Ref.

232

T40612

Contents Content: 1/2" DR. 1 Ratchet Handle - 36-teeth 2 Extension - 5", 10" 1 Sliding T Handle. 1 Universal Joint. 1 Swivel Handle - 15"

AUTOMOTIVE TOOLS & ACCESSORIES

Contents Content: 1/2" DR. 4 Hex Socket Bits 5mm (180mmL) 6, 7, 8 mm (100mmL) 4 Star Socket Bits T40, T45 (120mmL) T55, T70 (140mmL) 4 Spline Socket Bits M6, M8, M10, M12 (100mmL)

T4143 Ref. T5043A

Contents Content: 1/2" DR. 14 Flank Deep Socket 10, 12, 13, 14, 15, 17, 19, 21, 22, 23, 24, 27, 30, 32 mm (77mmL)

20pc Flank Socket Set

24pc Flank Socket Set

T4203

Contents Content: 1/2" DR. 10 Flank Socket 20, 21, 22, 23, 24, 26, 27, 28, 30, 32 mm 10 Flank Deep Socket 20, 21, 22, 23, 24, 26, 27, 28, 30, 32 mm

21pc Flank Socket Set

Ref.

T4248

27pc Socket Bit Set

T4212 Ref. T4212

Contents Content: 1/2" DR. Flank Socket 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm Flank Deep Socket 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

Contents

T4281 Ref.

Content: 1/2" DR. 21 Flank Socket 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32 mm T4281

Contents Content: 3/8" DR. & 1/2" DR. 11 1/2" DR. Hex Socket Bit 4, 5, 6, 7, 8, 10, 12 mm (55mmL) 14 mm (60mmL) 17 mm (70mmL) 8 mm (80mmL) 10 mm (140mmL) 10 1/2" DR. Spline Socket Bit M5, M6, M8, M10, M12, M14, M16 (55mmL) M10, M12 (110mmL) M8 (120mmL) 6 3/8" DR. Hex Socket 4, 5, 6, 7, 8, 10 mm (50mmL)

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

Ref.

T4248

233

41pc Star Set

4pc snap ring pliers sET

T4411 Ref.

T4411

Contents Content: 1/4" DR. & 3/8" DR. & 1/2" DR. 13 Star L Key T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70 4 1/4" Star Bit T9, T10, T15, T20 (30mmL) 6 10mm Star Bit T25, T27, T30, T40, T45, T50 (30mmL) 1 10mm Star Bit - T55 (115mmL) 2 14mm Star Bit - T60, T70 (75mmL) 5 1/4" DR. Star Socket E4, E5, E6, E7, E8 7 3/8" DR. Star Socket E10, E11, E12, E14, E16, E18, E20 3 Bit Holder 1/4" DR. x 1/4", 3/8" DR. x 10mm, 1/2" DR. x 14mm

T5043A Ref.

T5043A

Contents 4 Snap Ring Pliers External Straight Tip 1.8mm (Open) Internal Straight Tip 1.8mm (Close) External 90° Bend Tip 1.8mm (Open) Internal 90° Bend Tip 1.8mm (Close)

4pc Pliers set

3pc Pliers Set

2.8 GENERAL TOOLS

T5045 Ref.

T5038

Ref. T5038

234

Contents 1 Adjustable Wrench - 10" 1 Waterpump Pliers - 10" 1 Locking Pliers - 10"

AUTOMOTIVE TOOLS & ACCESSORIES

T5045

Contents 1 Long Nose Pliers - 8" 1 Combination Pliers - 7" 1 Diagonal Pliers - 7" 1 Slip Joint Pliers - 8"

5pc Hammer Chisel Set

5pc Cutting tools set

T5053

Contents 1 Enginneer Hammer - 300g 1 Rubber Hammer - 400g 3 Chisel 15mm (180mmL) 19mm (200mmL) 25mm (220mmL)

Ref. T5055

5pc Hammer Chisel Set

Contents 1 Straight Shears. 1 Mini Hacksaw Frame - 6" 2 Saw Blade. 1 Utility Knife.

5pc File Set

T5053AF Ref.

T5053AF

Contents 1 Riveting Hammer - 32mm 1 Soft Face Hammer - 400g 3 Chisel 15mm (180mmL) 19mm (200mmL) 25mm (220mmL)

T5056 Ref.

T5056

Contents 1 Flat File - 8" 1 Half Round File - 8" 1 Round File - 8" 1 Square File - 8" 1 Triangular File - 8"

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

Ref.

T5055

235

6pc Hinged Socket Wrench set (sae)

6pc Hammer, Chisel & Punch Set

T56033AF

T50616S Ref. T50616S

Contents 6 Hinged Socket Wrench 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 7/8", 13/16" x 7/8", 15/16" x 1"

6pc 15° Offset Star Ratchet Ring Wrench Set

Ref.

T56033AF

7pc Hinged Socket Wrench Set

2.8 GENERAL TOOLS

T50617

236

Ref. T50617

Contents 6 15° Offset Star Ratchet Ring Wrench E6xE7, E8xE10, E11xE12, E14xE16, E18xE20, E22xE24

AUTOMOTIVE TOOLS & ACCESSORIES

Contents 1 Riveting Hammer - 32mm 1 Soft Face Hammer - 400g 1 Ribbed Chisel - 26mm (200mmL) 2 Pin Punch - 4mm (190mmL), 6mm (210mmL) 1 Center Punch - 4mm (185mmL)

T5074 Ref. T5074

Contents 7 Hinged Socket Wrench 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 mm

8pc 75째 Offset Ring Wrench Set

8pc 45째 Offset Ring Wrench Set

T5081

Contents 8 75째 Offset Ring Wrench 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 21x23 mm

8pc Mini Pliers Set

Ref. T5085

8pc Combination Wrench Set

T50814 Ref.

T50814

Contents 8 45째 Offset Ring Wrench 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 21x23, 22x24 mm

Contents 1 Round Nose Plier - 5" 1 Flat Nose Plier - 5" 1 Combination Plier - 5" 1 Long Nose Plier - 5" 1 Needle Nose Plier - 6" 1 Bend Nose Plier - 6" 1 Cutter Plier - 6" 1 Diagonal Plier - 6"

T5089 Ref. T5089

Contents 8 Combination Wrench 24, 25, 26, 27, 28, 29, 30, 32 mm

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

Ref.

T5085

237

9pc Measuring Tools Set

12pc Reversible Gear Wrench Set

T5096 Ref.

T5096

Contents 1 Stainless Steel Vernier Caliper. 1 Auto Center Punch. 1 Stainless Steel Straight Ruler - 30cm 1 Stainless Steel Protractor. 1 Screw Pitch Gauges - 0.25-6 (Metric) 1 Screw Pitch Gauges - 4-62 (SAE) 1 26 Sizes Feeler Gauges (SAE & Metric) 1 Steel Scriber. 1 Measuring Tape - 5m

11pc Double Open End Wrench sET

T51211 Ref. T51211

Contents 12 Reversible Gear Wrench 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

12pc Auto Kit Set

T5122

2.8 GENERAL TOOLS

T5111

238

Ref. T5111

Contents

Ref.

11 Double Open End Wrench 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 27x27, 30x32 mm

T5122

AUTOMOTIVE TOOLS & ACCESSORIES

Contents 6 Fill/Drain Plug Key 5/16" Hex - 3/8" Hex 8mm Sq. - 3/8" Sq. 11mm Sq. - 12mm Hex 13mm Sq. - 14mm Hex 17mm Hex - 1/2" Hex 8mm Hex - 10mm Hex 2 1/2" DR. Magnetic Spark Plug Socket - 16, 20.6 mm 1 Plug Key Holder - 1/2"(F) x 21mm (F) 1 Telescope Mirror Stick/Magnetic Pick-up. 1 20pcs Feeler Gauges - 0.05mm to 1mm 1 Oil Filter Strap Wrench.

16pc Combination Wrench Set

33pc screw repair tools sET

T5161 Ref. T

Contents

T5331 Ref.

16 Combination Wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 mm

T5331

tap & die Set

Contents 1 Impact Driver 14 5/16" Short Bit Phillips - PH.2, PH.3 (36mmL) Pozidriv - PZ.2, PZ.3 (36mmL) Slotted - 9, 11 mm (36mmL) Hex - 6, 8, 10 mm (36mmL) Star - T25, T30, T40, T45, T50 (35mmL) 4 5/16" Long Bit Phillips - PH.2, PH.3 (80mmL) Slotted - 9, 11 mm (80mmL) 1 Bit Adaptor 3/8" DR. x 5/16" Hex 1 Bit Holder 1/2" DR. x 5/16" 4 Stud Extractor - 6, 8, 10, 12 mm 3 Nut Splitter - 5/16"-1/2", 1/2"-5/8", 5/8"-7/8" 5pcs Screw Extractor Set - 7/64", 9/64", 5/32", 1/4", 19/64"

Ref.

TD40BM-T

2.8 GENERAL TOOLS

TD40BM-T Contents 34 Tap & Die m3x0.5, m3x0.6, m4x0.7, m4x0.75, m5x0.8, m5x0.9, m6x0.75, m6x1, m7x0.75, m7x1, m8x1, m8x1.25, m10x1.25, m10x1.5, m12x1.5, m12x1.75, 1/8" NPT 27 1 Tap Wrench - m3-m12 1 "T" Type Tap Wrench - 1/4" 1 Die Stock - 25mm 1 Screw Driver 1 Screw Pitch Gauge

AUTOMOTIVE TOOLS & ACCESSORIES

239

line color screwdrivers

go-through screwdrivers •

• •

Fully hardened with magnetic tips. Acetate plastic unbreakable.

• Ref.

Range

HM-3802

Ref.

Range

3 x 2” -

HM-3707

HM-3803

3 x 2” -

HM-3708

6 x 4” -

HM-3804

3 x 3” -

HM-3709

6 x 4” -

HM-3805

3 x 3” -

HM-3710

8 x 6" -

HM-3806

5 x 10” -

HM-3711

8 x 6" -

HM-3807

5 x 10” -

HM-3712

8 x 8" -

HM-3808

5 x 12” -

HM-3713

8 x 8" -

HM-3809

5 x 12” -

HM-3019

6 x 11/2” -

HM-3020

6 x 11/2” -

HM-3021

6 x 4” -

HM-3022

6 x 4” -

HM-3810

6 x 12” -

HM-3811

6 x 12” -

S3503 Ref. S3503

11/2" - 2 way -

impact driver set

2.8 GENERAL TOOLS

angle driver set

240

Impact resistant plastic handle with rooted cap allows handle to be struck without causing damage Made of chrome-moly steel.

Contents 1 angle driver 2 phillip - 2 x 25 mm

AUTOMOTIVE TOOLS & ACCESSORIES

HM-3207 Ref. HM-3207

Contents 4 bits x 36 mm: 2 x , 2 x 2 bits x 80 mm: 2 x

90° internal snap ring pliers

internal snap ring pliers

S6136

S6137

Ref.

Length

Ref.

Length

S6136

300mm

S6137

300mm

90° external snap ring pliers

external snap ring pliers

S6139

S6138

Ref.

Length

Ref.

Length

S6138

300mm

S6139

300mm

needle nose pliers

HM-3813 Ref. HM-3813

2.8 GENERAL TOOLS

45° extra long needle nose pliers

HM-3820 Length 6”

Ref. HM-3820

Length 11”

AUTOMOTIVE TOOLS & ACCESSORIES

241

diagonal cutting pliers

locking pliers

HM-3814

S612-5WR/7WR/10WR

Ref.

Length

HM-3814

6”

bench vise

Ref.

Size

Length

Weight

S612-5WR

40 - 100mm

170 g

S612-7WR

80 - 120mm

340 g

S611-10WR

110 - 160mm

10"

515 g

Range

HM-006

6”

HM-008

8”

thickness gauge

2.8 GENERAL TOOLS

fluorescent working light

E3510

HM-3103

242

Ref.

Length

Ref.

HM-3103

250 mm

E3510

AUTOMOTIVE TOOLS & ACCESSORIES

Contents 25 blades: 0.01 - 1.00 mm

automatic center punch

8pc pin punch set

HM-3927

S9059

Ref.

Length

Ref.

HM-3927

135 mm

S9059

bonded windscreen removal tool

Contents 1.6, 2.3, 3.2, 4.0, 4.8, 5.5, 6.4, 8.0

4pc pry bar set

E5241

• • •

Specially shaped blade is suitable for cutting through bonding resin used to fix modern windscreens. The blade can be resharpened or replaced with a new one. 2 handle operation permits tool to be accurately guided whilst cutting through bond.

•

Ref. E2321

Set consists of four hard wearing pry bars applicable for a number of different jobs.

Contents 8”, 12”, 18”, 24”

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

E2321

243

magnetic trays

flexible magnetic bar

E2622

Ref.

HM-3639

Dimension

E2622

240 x 140 mm

rubber pad

for Passenger Car Lift

Q0301004 2.8 GENERAL TOOLS

Q0301005

Q0301003

Ref.

244

Dimension

Q0301003

165 x 100 x 35 mm

Q0301004

165 x 100 x 60 mm

Q0301005

ø120 X 25 mm

AUTOMOTIVE TOOLS & ACCESSORIES

Ref. HM-3639

Length 20”

plastic creepers

steel car seat

E2761

TR6301 TR6451

Ref.

Dimension

E2761

1000 x 510 x 90 mm

TR6451

930 x 440 x 105 mm

3 in 1 protectors cover

Ref.

Dimension

TR6301

440 x 360 x 365 mm

fender covers

Seat covers Steering wheel covers. Handle covers. Larger size for all cars and trucks.

HM-AM99

HM-AM12

•

With 3 special magnet in the covers.

AUTOMOTIVE TOOLS & ACCESSORIES

2.8 GENERAL TOOLS

• • • •

245

225pc o-ring assortment

hose clamps set

• •

2.8 GENERAL TOOLS

E1301

246

E0153

Contents

Quantity

1/4” x 3/8”

5/16” x 7/16”

3/8” x 1/2”

1/2” x 5/8”

3/8” x 9/16”

7/16” x 5/8”

1/2” x 11/16”

9/16” x 3/4”

5/8” x 13/16”

11/16” x 7/8”

3/4” x 7/8”

7/32” x 11/32”

3/4” x 1”

3/16” x 5/16”

5/32” x 9/32”

1/8” x 1/4”

13/16” x 17/16”

5/8” x 3/4”

AUTOMOTIVE TOOLS & ACCESSORIES

Ref. E0153

•

Supplied with a hose clamp screw driver and a display board. Flexible shaft nut spinner 7mm x 1pc. 10pcs for each range. Contents

8-12, 10-16, 12-22, 16-25, 20-32, 25-40, 30-45, 32‑50, 40-60, 50-70, 60-80, 70-90

DISCLAIMER 1.

All information is given to the best of our knowledge. All specifications are to be considered non-binding information. Any claim for damages of any kind is excluded. We reserve the right to change technical specifications without prior notice, provided that they ensure product improvement.

The information presented is based on technical experience but does not guarantee a productâ&#x20AC;&#x2122;s suitability for specific applications, and does not relieve the users of the responsibility to undertake their own testing, including where any third-party trademark rights are concerned.

Pictures in the catalogue may contain optional accessories which are not included in the standard shipment, and need to be ordered additionally.

ďťż

247

Notes

ï»¿

Notes

ï»¿

Graphical index Page 3 - 52

Page 53 - 78

Page 79 - 108

Page 109 - 128

ï»¿

Graphical index Page 129 - 138

Page 141 - 144

Page 145 - 158

Page 159 - 166

ï»¿

Graphical index Page 167 - 182

Page 183 - 192

Page 193 - 202

ï»¿

Graphical index Page 203 - 224

Page 225 - 246

ï»¿

No.34, Jalan TPP 1/19, Taman Perindustrian Puchong, Batu 12, 47100 Puchong, Selangor, Malaysia. Tel : +603 8060 6961 Fax : +603 8060 6923 E-mail : lses@tm.net.my / lsauto@streamyx.com Website : www.ls.com.my

254

ďťż