Induction Lighting specification sheets
project: fixture type:
DXWPB40 SERIES
location: contact/phone:
BRAVO! WALLPACK INDUCTION LUMINAIRE The BRAVO! Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, hotels and commercial buildings.
Product Specifics Light Source
One 40 Watt Induction Lamp
Lumens
2800 Lumens
Color Temperature
CRI
Input Voltage
5000K >80 (Ra)
120 or 277 VAC, 50/60Hz
Fixture Weight
10 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
7.375"
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 12.25"
Detailed Specifications CONSTRUCTION Features a durable, die-cast aluminum back housing with an architectural bronze powder coated finish, and a color-matched polycarbonate front housing. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by an impact-resistant, prismatic, polycarbonate refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W round induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
5
10.375"
Photometrics 3
2
.1 1
.2
.5 House Side Street Side
2 0 5
1
INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.
1.75 2
1
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Options
PC1 = 120V Photocell
DXWPB40
IND40
120 = 120V
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
PC2 = 277V Photocell
**Order as a separate line item
Ordering Example: DXWPB40-IND40-120-PC1
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXWPA15 SERIES
location: contact/phone:
WALLPACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.
Product Specifics Light Source
One 40 Watt Induction Lamp
Lumens
2800 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
15 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
7 ˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications 12˝
CONSTRUCTION Features a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandalresistant, borosilicate glass prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.
11 ˝
Photometrics 3
2
1 .1 2
0
House Side Street Side
.5 1
1
1.75 2
2.75 3
.2
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Options
PC1 = 120V Photocell
DXWPA15
IND40
120 = 120V
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
PC2 = 277V Photocell
WPA15WG = Wireguard
Ordering Example: DXWPA15-IND40-120-PC1
**Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXWPA25 SERIES
location: contact/phone:
WALLPACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
20 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
10 ˝
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
˝
Detailed Specifications CONSTRUCTION Features a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandalresistant, borosilicate glass prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
˝
Photometrics 3
2
1 .1 1 0
.5
House Side Street Side
5
1
INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.
1.75 2
2
2.75 3 .2 4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Options
PC1 = 120V Photocell
DXWPA25
IND80
120 = 120V
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
PC2 = 277V Photocell
WPA25WG = Wireguard
Ordering Example: DXWPA25-IND80-120-PC1
**Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXWPR40 SERIES
location: contact/phone:
DESIGNER WALL PACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a round design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, parking garages and commercial buildings.
Product Specifics Light Source
One 40 Watt Induction Lamp One 80 Watt Induction Lamp
Lumens
2800 Lumens (1 x 40W) 6400 Lumens (1 X 80W)
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
15 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white powder coated steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, borosilicate glass prismatic refractor.
15˝
Photometrics 3
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
2
LAMPS (Included) Available with either (1) 40W or (1) 80W round induction lamp that provides either 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
0
INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.
.1
.5 1
1
2 5
House Side Street Side
1
1.75 2
2.75 3
.2
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information
Accessories*** Field Installed
Model
Lamp
Volts
Style
Housing Color
Options
PC1 = 120V Photocell
DXWPR40
IND40*
120 = 120V
OF = Open Face
BZ = Bronze
PC1 = 120V Photocell
PC2 = 277V Photocell
IND80**
277 = 277V
GR = Grid Frame
BK = Black
PC2 = 277V Photocell
***Order as a separate line item
HC = Half Cutoff
WH = White
Ordering Example: DXWPR40-IND40-120-HC-BZ-PC1 *HC Unit Only **OF & GR Units Only
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXVN40 SERIES
location: contact/phone:
VANDAL/CANOPY INDUCTION LUMINAIRE The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, parking areas, manufacturing facilities, warehouses and canopy lighting.
Product Specifics Light Source
One 40 Watt Induction Lamp
Lumens
2800 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
19 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
12 ˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 8 ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
12 ˝
Photometrics 3
.1
2 .5 1
1
House Side Street Side
0
INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access. Specifications are subject to change without notice.
1
2
1.75 2 .2 2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
Lamp
Volts
Options
DXVN40
IND40
120 = 120V
PC1 = 120V Photocell
277 = 277V
PC2 = 277V Photocell
Ordering Example: DXVN40-IND40-120-PC1
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXVN42 SERIES
location: contact/phone:
VANDAL/CANOPY INDUCTION LUMINAIRE The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for cold storage areas, walk-in freezers, meat packaging facilities, manufacturing facilities, warehouses, canopy lighting and parking garages.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
15 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
12 ˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO 12 12 ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access. Specifications are subject to change without notice.
12 ˝
Photometrics 3
.1 .2
2
.5 1
1
2 5
House Side Street Side
0
1
1.75 2
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Options
PC1 = 120V Photocell
DXVN42
IND80
120 = 120V
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
PC2 = 277V Photocell
VN42PC4 = Replacement Prismatic Lens
Ordering Example: DXVN42-IND80-120-PC1
VNQM = Hinged Quick Mount Bracket*** **Order as a separate line item ***Mount Over Recessed Electrical Box or Use 3/4˝ NPT Stem for Pendant Mounting
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXVNGL30 SERIES
location: contact/phone:
DELUXE GARAGE LIGHTER INDUCTION LUMINAIRE The DELUXE Garage Lighter Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, manufacturing facilities, warehouses canopy lighting and parking garages.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
17 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components Warranty – Lamp and Ballast
2 Year Limited
11˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is listed for covered ceiling mount and includes corrosion-resistant hardware. Features a two-piece aluminum reflector, the upper can be removed to create an attractive up-light. The lamp(s) are protected by a UV stabilized, vandal-resistant, polycarbonate prismatic refractor. Wet Location Listed. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
16˝
Photometrics 3 .1 2
.2 .5 1
1
2 5 House Side Street Side
10 0
INSTALLATION Ideal for mounting to any horizontal surface and includes a mounting plate for easy, hands-free wiring to any standard 4’’ junction box.
1
1.75 2
Specifications are subject to change without notice.
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information
Accessories* Field Installed
Model
Lamp
Volts
VNGL30PC = Replacement Lens
DXVNGL30
IND80
120 = 120V
VNGL30PM = Pendant Mount**
277 = 277V
*Order as a separate line item
Ordering Example: DXVNGL30-IND80-120
** Includes Junction Box, Slide Plate, Locknut, & Hardware
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXVNGL40 SERIES
location: contact/phone:
VANDAL RESISTANT INDUCTION GARAGE LIGHTER The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
15 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components Warranty – Lamp and Ballast
15˝
2 Year Limited 10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
Photometrics 3
2
LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access.
.1 .2 .5 1
1
2 5
House Side Street Side
0
1
1.75 2
2.75 3
Specifications are subject to change without notice.
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information
Accessories* Field Installed
Model
Lamp
Volts
VNQM = Hinged Quick-Mount Bracket
DXVNGL40
IND80
120 = 120V
CPSPS = Swivel Pendant Mount (Square Box)
277 = 277V
CPSPR = Swivel Pendant Mount (Round Box)
Ordering Example: DXVNGL40-IND80-120
PMJB = Offset Pendant Mount J-Box VNGL40PC = Replacement Lens VNGL30PM = Pendant Mount** *Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXTGL40 SERIES
location: contact/phone:
VANDAL RESISTANT INDUCTION GARAGE LIGHTER The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, cold storage, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.
Product Specifics Light Source
120 Watt Induction Lamp
Lumens
9600 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
15 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
15˝
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast hinged aluminum enclosure with an architectural textured powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
Photometrics 3
.2
.1
.5
LAMPS (Included) Available with (1) 120W round induction lamp that provides 9600 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features Easy-Hang Bracket that Fits Standard 4˝ Electrical Box, Allowing One-Person Installation. Specifications are subject to change without notice.
2
1 2
1
5 House Side Street Side
10 0
1
1.75 2
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
Lamp
Volts
Options
DXTGL40
IND120
120 = 120V
PC1 = 120V Photocell
277 = 277V
PC2 = 277V Photocell
Ordering Example: DXTGL40-IND120-120
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXFL50 SERIES
location: contact/phone:
DELUXE 12” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.
Product Specifics Light Source
One 40 Watt Induction Lamp
Lumens
2800 Lumens
Color Temperature
5000K
CRI
>80 (Ra)
Input Voltage
120 or 277 VAC, 50/60Hz
EPA Calculation
.55
Fixture Weight
19 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
5.3"
12.4"
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 12.4"
Detailed Specifications
15.6"
CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 12” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, anodized aluminum reflector which provides ideal 7H x 7V general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
Photometrics 3
2
.1 .2 .5
1
1 2 House Side Street Side
0 5 1
INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally.
1.75 2
2.75 3
Specifications are subject to change without notice. 4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
DXFL50
Lamp
IND40
Volts
Accessories** Field Installed
Mounting Arms* Square Pole
Mounting Arms* Round Pole
Options
120 = 120V
M6SS = 6”
M6SR = 6”
PC1 = 120V Photocell
277 = 277V
M10SS = 10”
M10SR = 10”
PC2 = 277V Photocell
PC2 = 277V Photocell
M12SS = 12”
M12SR = 12”
SF = Slip Fitter Mount
M18SS = 18”
M18SR = 18”
SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount
Ordering Example: DXFL50-IND40-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm
PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL50WG = Wireguard FL50GS = Glare Shield FL50LG = Clear Vandal Guard **Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXFL70 SERIES
location: contact/phone:
DELUXE 16” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
>80 (Ra)
Input Voltage
120 or 277 VAC, 50/60Hz
EPA Calculation
.86
Fixture Weight
24 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
7.5"
2 Year Limited
Warranty – Lamp and Ballast
16.2"
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 16.2"
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 16” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features three different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
Photometrics 3
2
.1 .2 .5
1
2 5
House Side Street Side
0 10 1
INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.
1.75 2
1
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
DXFL70
Lamp
IND80
Volts
Accessories** Field Installed
Mounting Arms* Square Pole
Mounting Arms* Round Pole
Reflectors
Options
120 = 120V
M6SS = 6”
M6SR = 6”
BLANK = Standard PC1 = 120V Photocell
277 = 277V
M10SS = 10”
M10SR = 10”
T5 = IES Type 5
M12SS = 12”
M12SR = 12”
SF = Slip Fitter Mount
M18SS = 18”
M18SR = 18”
SB = Swivel Bracket
PC2 = 277V Photocell
PC2 = 277V Photocell
HD = Heavy Duty Direct Pole Mount Ordering Example: DXFL70-IND80-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm
PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL70WG = Wireguard FL70GS = Glare Shield FL70LG = Clear Vandal Guard FL70BF = Full Baffle **Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXFL90 SERIES
location: contact/phone:
DELUXE 24” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.
Product Specifics Light Source Lumens Color Temperature
1 x 150 Watt Induction Lamp 2 x 150 Watt Induction Lamp 1 x 200 Watt Induction Lamp
12000 Lumens (1 x 150W) 24000 Lumens (2 x 150W) 18000 Lumens (1 x 200W) 5000K
CRI
>80 (Ra)
Input Voltage
120 or 277 VAC, 50/60Hz
EPA Calculation
1.67
Fixture Weight
40 Lbs.
Rated Life
10.5"
24"
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
24"
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 24” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features Two different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.
Photometrics .1
3 1
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS(Included) Available with either (1) or (2) 150W induction lamps that provide 12000 initial lumens per lamp or (1) 200W induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (RA), and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.
2
5 1
10 House Side Street Side
0 20 1
1.75 2
2 .5 .2
2.75 3
4
5
0
Ordering Information
2 2.25
3 3.75
4
5
6
7
Accessories*** Field Installed
Model
Lamp
Volts
Mounting Arms* Square Pole
Mounting Arms* Round Pole
Reflectors
DXFL90
IND150
120 = 120V
M6SS = 6”
M6SR = 6”
WDE = Wide Angle PC1 = 120V Photocell
IND200
277 = 277V
M10SS = 10”
M10SR = 10”
T5 = IES Type 5
IND300**
1
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Options
PC2 = 277V Photocell
PC2 = 277V Photocell
M12SS = 12”
M12SR = 12”
SF = Slip Fitter Mount
M18SS = 18”
M18SR = 18”
SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount
Ordering Example: DXFL90-IND150-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm **2 x 150 watt Induction Lamp
PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL90WG = Wireguard FL90GS = Glare Shield FL90LG = Clear Vandal Guard FL90BF = Full Baffle ***Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXAD20 SERIES
location: contact/phone:
ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.
Product Specifics Light Source
One 40 Watt Induction Lamp
Lumens
2800 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
19 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
12 ˝
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
16 ˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
˝
Photometrics 3
2 .1
1
.5
.2 1
2
LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Can be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets. Specifications are subject to change without notice.
House Side Street Side
5 0
1
1.75 2
2.75 3
4
5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Reflectors
Options
PC1 = 120V Photocell
DXAD20
IND40
120 = 120V
BLANK = Smooth (Standard)
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
FLD = Flood
PC2 = 277V Photocell
PB1-AD20 = Pole Bracket (1) Fixture, Square Pole
Ordering Example: DXAD20-IND40-120-FLD
PB2-AD20 = Pole Bracket (2) Fixtures at 180°, Square Pole PBC2-AD20 = Pole Bracket Cover For Use With PB2-AD20 PB3-AD20 = Pole Bracket (3) Fixtures at 120°, Square Pole PBC3-AD20 = Pole Bracket Cover For Use With PB3-AD20 PB4-AD20 = Pole Bracket (4) Fixtures at 90°, Square Pole PBC4-AD20 = Pole Bracket Cover For Use With PB4-AD20 PBCAP-AD20 = Pole Bracket Cap For Use With PB Bracket w/o Covers **Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXAD40 SERIES
location: contact/phone:
ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
24 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
16 ˝
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65 20˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components.
˝
Photometrics 3
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Can be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets. Specifications are subject to change without notice.
.1 .2 2
.5 1 2
1 House Side Street Side
10 0
1
5
1.75 2
2.75 3
4
5
012
2.253
3.75
45
67
Distance In Units Of Mounting Heigh t Values Based On 10 Foot Mounting Heigh t 1/2 Maximum Candela Trace Shown As Dashed Curv e (+) = Maximum Candela Poin t
Ordering Information
Accessories** Field Installed
Model
Lamp
Volts
Reflectors
Options
PC1 = 120V Photocell
DXAD40
IND80
120 = 120V
BLANK = Smooth (Standard)
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
FLD = Flood
PC2 = 277V Photocell
PB1-AD40 = Pole Bracket (1) Fixture, Square Pole
Ordering Example: DXAD40-IND80-277-PC2
PB2-AD40 = Pole Bracket (2) Fixtures at 180°, Square Pole PBC2-AD40 = Pole Bracket Cover For Use With PB2-AD40 PB3-AD40 = Pole Bracket (3) Fixtures at 120°, Square Pole PBC3-AD40 = Pole Bracket Cover For Use With PB3-AD40 PB4-AD40 = Pole Bracket (4) Fixtures at 90°, Square Pole PBC4-AD40 = Pole Bracket Cover For Use With PB4-AD40 PBCAP-AD40 = Pole Bracket Cap For Use With PB Bracket w/o covers **Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXKHU20 SERIES
location: contact/phone:
KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE The Medium Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.
Product Specifics Light Source
One 80 Watt Induction Lamp One 120 Watt Induction Lamp
Lumens
6400 Lumens (1 x 80W) 9600 Lumens (1 x 120W)
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra)
4.73"
22.83"
120 or 277 VAC, 50/60Hz
EPA Calculation
.67 15 Lbs.
Fixture Weight Rated Life
13.58"
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W or (1) 120W rectangular induction lamp that provides 6400 or 9600 initial lumens per lamp respectively. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any surface and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access. “Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries. Specifications are subject to change without notice.
Ordering Information
Accessories* Field Installed
Model
Lamp
Volts
Reflectors
Mounting
Options
PC1 = 120V Photocell
DXKHU20
IND80
120 = 120V
ADJ = Adjustable
PM = Pole Mount
PC1 = 120V Photocell
PC2 = 277V Photocell
IND120
277 = 277V
WM = Wall Mount
PC2 = 277V Photocell
KHU20GS = Glare Shield
Ordering Example: DXKHU20-IND120-277-ADJ-PM-PC2
*Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXKHU30 SERIES
location: contact/phone:
KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE The Large Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.
Product Specifics Light Source
200 Watt Induction Lamp
Lumens
18000 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
4.73"
22.83"
.87
EPA Calculation Fixture Weight
19 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
13.58"
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 200W rectangular induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any wall surface or pole and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access. “Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries. Specifications are subject to change without notice.
Accessories* Field Installed
Ordering Information Model
Lamp
Volts
Reflectors
Mounting
Options
PC1 = 120V Photocell
DXKHU30
IND200
120 = 120V
T2 = Type II
PM = Pole Mount
PC1 = 120V Photocell
PC2 = 277V Photocell
277 = 277V
T3 = Type III
WM = Wall Mount
PC2 = 277V Photocell
KHU30GS = Glare Shield
T5 = Type V
*Order as a separate line item
Ordering Example: DXKHU30-IND200-277-T3-PM-PC2
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXCH40 SERIES
location: contact/phone:
COBRAHEAD INDUCTION LUMINAIRE The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.
Product Specifics Light Source
40 Watt Induction Lamp 80 Watt Induction Lamp
Lumens
2800 Lumens (40W) 6400 Lumens (80W)
Color Temperature
7.87"
14"
5000K
CRI
>80 (Ra)
Input Voltage
120 or 277 VAC, 50/60Hz 30.51"
Fixture Weight
19 Lbs.
EPA
1.4
Rated Life
100,000 Hours
Warranty – Housing Components Warranty – Lamp and Ballast
2 Year Limited 10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘toolless’’ access clips.
Photometrics 3
1 2
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W or (1) 80W rectangular induction lamp that provides 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Accepts a 2’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.
.2
.5
2 5
1
10 20
House Side Street Side
0
1
1.75 2
2.75 3
4 .1 5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
Lamp
Options
DXCH50
IND40
NTLR = NEMA Twist-lock Photocell Receptacle
IND80 Ordering Example: DXCH40-IND80-120-NTLR
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXCH50 SERIES
location: contact/phone:
COBRAHEAD INDUCTION LUMINAIRE The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.
Product Specifics Light Source
150 Watt Induction Lamp 200 Watt Induction Lamp
Lumens Color Temperature
11"
16"
12000 Lumens (150W) 18000 Lumens (200W) 5000K
CRI
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
36.75"
Input Voltage
32 Lbs.
EPA
2.6
Rated Life
100,000 Hours
Warranty – Housing Components Warranty – Lamp and Ballast
2 Year Limited 10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘toolless’’ access clips.
Photometrics 3
1 2
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 150W or (1) 200W rectangular induction lamp that provides 12000 or 18000 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Accepts a 2⅜’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.
.2
.5
2 5
1
10 20
House Side Street Side
0
1
1.75 2
2.75 3
4 .1 5
0
1
2 2.25
3 3.75
4
5
6
7
Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point
Ordering Information Model
Lamp
Options
DXCH50
IND150
NTLR = NEMA Twist-lock Photocell Receptacle
IND200 Ordering Example: DXCH50-IND200-120-NTLR
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXHB11 SERIES
location: contact/phone:
HIGH BAY INDUCTION LUMINAIRE The High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.
Product Specifics Light Source
One 80 Watt Induction Lamp
Lumens
6400 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
19 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
101/2˝
UL, CSA, CE, FCC, ISO, IP65 91/2˝
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heatdissipating fins or leaves the ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.
9˝
Photometrics 1293
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
970
646 2 323
LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Features an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available.
1
Specifications are subject to change without notice.
Maximum Candela = 1292.855 Located At Horizontal Angle = 0, Vertical Angle = 42 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (42) (Through Max. Cd.)
Accessories*** Field Installed
Ordering Information Model
Lamp
Volts
Reflector
Options
CPSPS = Swivel Pendant Mount (Square Box)
DXHB11
IND80
120 = 120V
22AL = 22” Aluminum
LC3 = 3’ Cord
CPSPR = Swivel Pendant Mount (Round Box)
277 = 277V
22CR = 22” Acrylic
LC3120 = 3’ Cord w/120V Straight Blade Plug
CPMH3 = Malleable Hook w/ 1” NPT Threads
LC3120L = 3’ Cord w/120V Twist Plug
HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)
LC3277L = 3’ Cord w/277V Twist Plug
HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022)
Ordering Example: DXHB11-IND80-277-22CR
HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022) HBWG22 = 22” Wire Guard (Requires CB50022) HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022) CB50022 = 22” Tool-Less Clamp Band CO50022 = 22” Collar for Acrylic Refractor LC3 = 3’ Cord LC3120 = 3’ Cord w/120V Straight Blade Plug LC3120L = 3’ Cord w/120V Twist Plug LC3277L = 3’ Cord w/277V Twist Plug SFC500 = Safety Cable ***Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
project: fixture type:
DXHB51 SERIES
location: contact/phone:
DELUXE HIGH BAY INDUCTION LUMINAIRE The DELUXE High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.
Product Specifics Light Source
200 Watt Induction Lamp
Lumens
18000 Lumens
Color Temperature
5000K
CRI
Input Voltage
>80 (Ra) 120 or 277 VAC, 50/60Hz
Fixture Weight
25 Lbs.
Rated Life
100,000 Hours
Warranty – Housing Components
2 Year Limited
Warranty – Lamp and Ballast
10 Year Limited
Ratings
UL, CSA, CE, FCC, ISO, IP65
Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heat-dissipating fins or leaves ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.
Photometrics 5053
ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).
3790
2527
LAMPS (Included) Available with (1) 200W round induction lamp that provides 18000 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.
2 1263
INSTALLATION Features an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available. Specifications are subject to change without notice.
1
Maximum Candela = 5053.23 Located At Horizontal Angle = 180, Vertical Angle = 22.5 # 1 - Vertical Plane Through Horizontal Angles (180 - 0) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (22.5) (Through Max. Cd.)
Accessories** Field Installed
Ordering Information Model
Lamp
Volts
Reflectors
Options
CPSPS = Swivel Pendant Mount (Square Box)
DXHB51
IND200
120 = 120V
22AL = 22” Aluminum
LC3 = 3’ Cord
CPSPR = Swivel Pendant Mount (Round Box)
277 = 277V
22CR = 22” Acrylic
LC3120 = 3’ Cord w/120V Straight Blade Plug
CPMH3 = Malleable Hook w/ 1” NPT Threads
LC3120L = 3’ Cord w/120V Twist Plug
HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022)
LC3277L = 3’ Cord w/277V Twist Plug
HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)
Ordering Example: DXHB51-IND200-120-22CR
HBWG22 = 22” Wire Guard (Requires CB50022) HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022) HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022) CB50022 = 22” Tool-Less Clamp Band CO50022 = 22” Collar for Acrylic Refractor LC3 = 3’ Cord LC3120 = 3’ Cord w/120V Straight Blade Plug LC3120L = 3’ Cord w/120V Twist Plug LC3277L = 3’ Cord w/277V Twist Plug SFC500 = Safety Cable **Order as a separate line item
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com