How To Reset The Check Engine Light In Your Volkswagen Tiguan by Decatur Mechanic?-
Volkswagen Tiguan has numerous systems to run them efficiently and smoothly on the road.
To determine the problems in the car earlier, it has a wellfunctional check engine light.
Thus, the check engine light can alert the driver about the budding problems under the hood.
If the problem activating the check engine light is not resolved on time, it will lead to severe damage.
Through the following ways you can reset the check engine light in Volkswagen Tiguan.
Turn the ignition on and off
To reset the check engine light of the car, the on-off method is the most effective one.
In this method, you have to turn on/off the key in the ignition for 1-2 seconds repeatedly to resolve the issues.
Use an OBD2 scanner
OBD2 scanner is the most useful one to address and reset the check engine light of the car.
In this case, you have to plug the scanner into the OBD port and turn it to identify the error code to resolve the problem.
Battery reset technique
Another way to reset the check engine light of the car is by removing the battery terminal for 30 to 60 seconds.
In this phase, you have to remove the negative battery terminal and leave your car for 10 to 15 min to reset it.
Let it go off itself
Most common way to reset the check engine light of a car is to wait and let it go off by itself.
At this point, you have to drive the car continuously for 3 days to run the computer in a cycle to refresh them.
Putting off the fuse
Moreover, resetting the check engine light is by pulling off the engine control unit fuse and then putting them back again.
Go through the owner's manual for identifying the fuse of the engine control unit.
What happens when the check engine light returns?
Through the above methods, you can reset the check engine light of the Volkswagen Tiguan.
If the check engine light is still glowing again, consult a mechanic for diagnosis and repair.
Munich West https://www.munichwest.com/