Empowering without limitations
Higher performing. More configurations. Lower cost.
Eaton’s Synflex Optimum thermoplastic hydraulic hoses and fittings empower OEMs to reimagine design. Our system engineered portfolio offers streamlined product configurations that make it easy to find the perfect combination for every application. And our commitment to innovation includes the design and technical support needed to develop more efficient, safe and productive systems.
To learn more about the Synflex
thermoplastic hydraulic hose and fittings portfolio. Page 1
www.eaton.com/synflexoptimum
Optimum
UV / Ozone protection
The thermoplastic polyurethane and polyester outer-cover resists ozone, ultraviolet light and aging.
Easier routing and installation
Reformulated nonstick cover requires 50% less routing force, improved kink resistance and compact fittings for improved routing.
Temperature resistance
Improved hose functionality over a wide temperature range – from 40°C (-40°F) to +100°C (212°F).
Custom thermoforming
Ability to mold into configurations that match system design.
Higher abrasion resistance
The new TPU and polyester cover increases abrasion resistant by 10%.
Powerful performance
Lift and handle heavy loads with hose power ranges extending from 1,015 psi to 5,000 psi.
Chemical resistance
Thermoplastic composition paired with nylon lining prevents absorption of most oils and hydraulic fluids.
Flexible design
Lightweight hose design drives performance efficiencies, reducing vehicle power requirements.
Lighter weight
Synthetic reinforced thermoplastic hoses are about 2x lighter then equivalent wire braided rubber hose.
Bonding capabilities
Synflex thermoplastic hoses can be permanently joined without the use of any mechanical devices.
System Cleanliness
Thermoplastic hose will not degrade or create contaminants in filters and valves to help you maintain a clean system.
Noise reduction
Special reinforcements on the thermoplastic hoses help reduce machine noise.
4TA series
Optimized one-piece fitting crimps directly to Synflex 100R7, 100R8 and 100R18 hoses for the most robust economic connection.
TTC / Z series (with sleeve)
Leverage Eaton’s bestselling or existing high volume fitting on 100R7 and 100R8 hoses by adding a sleeve.
Fittings being rationalized from the portfolio include 903, 90H, 90N and U series
902 series
Field attachable reusable fitting that can be assembled with hand tools made specifically for R7 hose.
ThermoRubber
100R7 100R8 100R18 100R7 100R7 100R8
100R7 3TR7 / 3TR7N Non-conductive 100R8 3TR8 / 3TR8N Non-conductive 100R18 3TR18CT
Fittings
3
Page 2
EATON Synflex Optimum thermoplastic hydraulic hose and fittings
3TR7
3TR7N Non-conductive
Operating temperature
For oil-based fluids: -40°C to +100°C (-40°F to +212°F)
For water-based fluids: -40°C to +66°C (-40°F to +150°F)
How to order/ part #
BC: continuous length in box
BX: 2 lengths per box, no length less than 20 ft.
RL: random length reel, 2 lengths per reel, no length less than 20 ft.
R: continuous length on reel
Part #Hose I.D. Hose O.D. (nominal) Working Pressure Min. Burst Pressure Min. Bend Radius Weight mminmmin SAE ANSI barpsimminkg/mlbs/ft bar psibarpsi 3TR7-04 3TR7N-04 6,40.2512,50.49192 192 2800 28002073000 7591100031,81.250,090.06 3TR7-05 3TR7N-05 7,90.3114,60.57175 175 2550 25502073000 6901000038,11.500,130.08 3TR7-06 3TR7N-06 9,50.3816,50.65157 157 2300 23002073000 621900050,82.000,150.10 3TR7-08 3TR7N-08 12,70.5020,80.82140 140 2050 20502073000 621900069,92.750,210.14 3TR7-10 3TR7N-10 16,00.6323,60.93105 105 1525 15251402050 4216100101,64.000,240.16 3TR7-12 3TR7N-12 19,00.7526,41.0487 87 1250 1250 3485000108,04.250,260.17 3TR7-16 3TR7N-16 25,41.0033,71.3370 70 1000 1000 2804000190,57.500,400.27 Inner tube Nylon Reinforcement: 1-textile braid Cover Nonstick polyurethane Typical platforms • Agriculture • Horticulture • Chemical transfer • Foam systems • Food processing • Forestry delimber • General construction • General hydraulic systems • Lubrication systems
Marine steering
Utility vehicles and pickers
Rescue apparatus & tools
Water jetter drain/sewer
•
•
•
•
Approved fittings 4TA series
902 series
TTC/Z series with sleeve (FF91064)
SAE 100R7
3TR7 supersedes 3130, 3160 3TR7N supersedes 3740, 37AL
Thermoplastic hose
Base series Size Hose Length Packaging 3TR7 - 08 - 250BX
structure
4 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 3
92.2 ANSI (-4 thru -10)
3TR8
3TR8N Non-conductive
Operating temperature
For oil-based fluids: -40°C to +100°C (-40°F to +212°F)
For water-based fluids: -40°C to +66°C (-40°F to +150°F)
Approved fittings
Inner tube
Nylon
Reinforcement:
2-textile braid
Cover
Nonstick polyurethane
Typical platforms
• Air tools
• Cooling/misting/dust suppression
• Forestry delimber
• General construction
• General hydraulic
• High pressure chemical transfer
• Marine steering
• Mobile machinery
• Utility vehicles
• Recreational vehicles
• Rescue tools & equipment
How to order/ part # structure
BC:
SAE 100R8 Thermoplastic
3TR8 supersedes 3R80 3TR8N supersedes 3E80 4TA series TTC/Z series with sleeve (FF91064) Part #Hose I.D. Hose O.D. (nominal) Working Pressure Min. Burst Pressure Min. Bend Radius Weight mminmminbarpsibarpsimminkg/mlbs/ft 3TR8-04 3TR8N-04 6,40.2515,00.59350510014002040038,11.500,160.11 3TR8-06 3TR8N-06 9,50.3819,00.75280450011201620057,22.250,230.15 3TR8-08 3TR8N-08 12,70.5022,80.9024535509801420076,23.000,290.20 3TR8-12 3TR8N-12 19,00.7528,81.1315723006289200114,34.500,380.25 3TR8-16 3TR8N-16 25,41.0036,21.4314020505608200196,97.750,570.38
hose
Base series Size Hose Length Packaging 3TR8 - 08 - 250BX
continuous length in box BX: 2 lengths per box, no length less than 20 ft. RL: random length reel, 2 lengths per reel, no length less than 20 ft. R: continuous
on
5 EATON
Optimum thermoplastic hydraulic
and
Page 4
length
reel
Synflex
hose
fittings
3TR18CT
3TR18CT-046,40.2512,20.4821030508401220031,81.250,090.06
3TR18CT-057,90.3114,80.5821030508401220038,11.500,150.10
3TR18CT-069,50.3816,80.6621030508401220050,82.000,160.11
3TR18CT-0812,70.5021,60.8521030508401220069,92.750,250.17
3TR18CT-1016,00.6326,81.06210305084012200101,64.000,410.28
Operating temperature
For oil-based fluids: -54°C to +100°C (-65°F to +212°F)
For water-based fluids: -54°C to +66°C (-65°F to +150°F)
Approved fittings
4TA series 3TR18CT
Inner tube
Polyester
Reinforcement
2-textile braid
Cover
Nonstick polyester
Typical platforms
• Agriculture
• Horticulture
• Chemical & gas transfer
• Forestry delimber
• Forklifts
• Freezer applications
• General construction
• General hydraulics
• Lubrication systems
• Machine tools & robotics
• Portable hydraulic tools
How to order/ part # structure
3TR18CT - 08 - 250BX
BC: continuous length in box
BX: 2 lengths per box, no length less than 20 ft.
RL: random length reel, 2 lengths per reel, no length less than 20 ft.
R: continuous length on reel
Part #Hose I.D. Hose O.D. (nominal) Working Pressure Min. Burst Pressure Min. Bend Radius Weight mminmminbarpsibarpsimminkg/mlbs/ft
SAE 100R18
Thermoplastic hose
30CT
supersedes
Base series Size Hose Length Packaging 6 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 5
Designed for tough jobs.
As the pioneers of thermoforming technology, Eaton Synflex has taken the lead in overcoming hose routing and installation obstacles. Our application engineers work with customers developing designs and configurations that solve problems and improve manufacturing throughput.
Advantages
Flexibility
Our application engineers work with customer CAD models and develop routing best practices into customer’s systems.
Speed
Quick turnaround of design proposals and quotations.
Hands-on support
Our field engineers can be on site for prototype installation and initial production runs.
Cutting e dge technology
State of the art 3D printing for molds and fixtures providing quick design and prototype turnaround time.
Benefits
Smooth installations and quality control
Product manufacturing and design done in house, by Eaton, combined with custom labeled and marked assemblies makes for easy installation.
Reduced cost and complexity
Elimination of fittings, connections and other attachments reduces leak points and provides an overall cost savings.
Variety of capabilities
Thermoforming can be done with almost all of Eaton’s thermoplastic hose and tube products creating endless combinations and opportunities.
Best routing practices
Ideal for tight fitting spaces and routing away from heat sources and abrasion points.
Thermoforming
9 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 8
Designed for efficiency.
Over 500+ combinations of terminal ends.
Best-in-class features come standard. Designed for ease of use.
Seamless compatibility
Synflex Optimum fittings are optimized to work together with Synflex Optimum thermoplastic hydraulic hoses.
Single piece design
Synflex Optimum 4TA fittings follow a simple one-piece design that reduces matching errors during assembly, eliminates brazing failure risks and lowers assembly time.
Captive nut
A captive nut eliminates the weak spots found in other fittings. And it evenly distributes the force applied during assembly, helping prevent cracks and leaks that halt workflows and lead to unplanned downtime.
Easy assembly
Easier insertion, less force needed during assembly to push fitting onto hose
More configurations
Over 500+combinations of terminal ends
Smaller profile
They have a compact design and smaller profile making it easier for routing and assembly installation, especially in tight spaces.
Easy identification
Part numbers printed on fittings for easy identification.
Designed to last.
Corrosion resistance
Dura-Kote™ plating comes standard in our Synflex Optimum fittings. Dura-Kote plating delivers up 3x the corrosion protection on carbon steel fittings as compared to competitive hose fittings. And provides up to 1,000 hours of corrosion resistance. This is a huge step forward in metal fitting corrosion protection.
Synflex Optimum 4TA fittings
Newcompactdesign &smallerprofile Dura-KoteCompetitor A Competitor B Corrosioncomparisonafter650hoursofexposuretosaltspraytesting. 10 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 9
Complete nipple part number:
Product Group
one piece non-skive braided fitting =
Material stock code
inch hex stock or metric equivalent
Terminal end connection size*
Terminal end connection code
BSP 60° (swivel) with O-ring (BS5200)
CB=SAE 37° Male flare bulkhead (with jam nut)
FJ= SAE JIC 37° Female swivel
NPTF Female pipe FP=
FR=ORS Female swivel
MB =Male O-ring boss (ORB)
MC =Male STC
MJ = SAE JIC 37° male rigid
MP =Male pipe rigid
NR = ORS Female with non-slide back nut
PF =Female pipe swivel
PS =Male pipe swivel
SP = NPSM female pipe swivel
Female pipe swivel
Male pipe swivel
Terminal end connecting configuration
If nipple has a straight configuration, then this position collapses
A
Hose size*
= = = = =
90°, standard or short drop D E G
45° 90° long drop
Material designation
67 1/2° F= 30°
= = =
= = = 110° H = 22 1/2° 60°
Cstainless steel, if fitting is zinc plated carbon steel (standard), this position collapses.
*Whenorderingsizes3,4,5,6and8thepartnumberrequiresonlysingledigits
11 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 10
4TA fittings numbering system 4T A 12 FJ A 16 4T A BG PF PS
B C
4TA core fittings
JIC 37° male flare bulkhead (with jam nut)
Part numberHose sizeThread
4TA6CB6-069/16-18
DKO female swivel (light duty)
Part numberHose sizeThread
4T5DL4-0412mm
4T8DL6-0616mm
JIC/37° female swivel
Part numberHose sizeThread
JIC/37° female swivel, 90° elbow
Part numberHose sizeThread
4TA4FJB4-047/16-20
4TA5FJB4-041/2-20
4TA6FJB4-049/16-18
4T6FJB5-059/16-18
4TA6FJB6-069/16-18
JIC/37° female swivel, 90° long drop tube elbow
Part numberHose sizeThread
4TA4FJC4-047/8-14
4TA6FJC6-069/16-18
4TA8FJC6-063/4-16
NPTF female pipe
Part numberHose sizeThread
4TA4FP4-041/4-18
Female ORS swivel
Part numberHose sizeThread
4TA4FR4-049/16-18
4TA6FR4-0411/16-16
4TA6FR6-0611/16-16
4TA8FR6-0613/16-16
JIC/37° female swivel, 45° tube elbow
Part numberHose sizeThread
4TA4FJA4 -047/16-20
4T6FJA5 -059/16-18
4TA6FJA6 -069/16-18
4TA8FJA6 -067/8-14
4TA8FJA8 -083/4-16
4TA10FJA8 -087/8-14
Female ORS swivel, 45° tube elbow
Part numberHose sizeThread
4TA4FRA4-049/16-18
FRA
FJA FJB
FR
CB
FJ
DL
FJC
FP
4TA4FJ4-047/16-20 4TA4FJ6-067/16-20
4TA6FJ6-069/16-18
numberHose sizeThread 4TA8FJB6-063/4-16 4TA8FJB8-083/4-16 4TA10FJB8-08 1 7/8-12 4TA12FJB12 -12 1 1/16-12 Part numberHose sizeThread 4TA8FJ6-063/4-16 4TA8FJ8-083/4-16 4TA10FJ8-087/8-14 4TA12FJ8-08 1 1/16-12 4TA12FJ10 -10 1 1/16-12 4TA12FJ12 -12 1 1/16-12 4TA16FJ16 -16 1 5/16-12 Part numberHose sizeThread 4TA8FJC8-083/4-16 4TA10FJC8-087/8-14
numberHose sizeThread 4TA8FR8-0813/16-16 4TA10FR8-08 1-14 4TA10FR10 -101-14 4TA12FR12 -12 1 3/16-12
numberHose sizeThread 4TA6FRA6-0611/16-12 Part numberHose sizeThread 4TA8FP8-081/2-14 12 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 11
4TA5FJ4-041/2-20 4TA5FJ5-051/2-20 4TA5FJ6-061/2-20 4TA6FJ4-049/16-18 4TA6FJ5-059/16-18
Part
Part
Part
Female ORS swivel, 90° tube elbow short drop
Part numberHose sizeThread
4TA4FRB4-049/16-18
4TA6FRB4-0411/16-16
Male cone, 60° Block
Part numberHose sizeThread
4TA6BGB6-063/8-19
Part numberHose sizeThread
4TA6FRB6-0611/16-16
4TA8FRB8-0813/16-12
Male straight thread o-ring rigid
Part numberHose sizeThread
4TA4MB4-047/16-20
4TA5MB4-041/2-20
4TA6MB4-049/16-18
Male STC
Part numberHose sizeThread
4TA6MB5-051/2-20
4TA6MB6-069/16-18
4TA8MB6-063/4-16
N.P.T.F. male pipe rigid
Part numberHose sizeThread
4TA2MP4-041/8-27
4TA4MP4-041/4-18
4T4MP5-051/4-18
4TA4MP6-061/4-18
4TA6MP4-043/8-18
4T6MP5-053/8-18
ORS Male
Part numberHose sizeThread
4TA4MR4-049/16-18
4TA6MR6-0611/16-16
ORS female with non-slide back nut
JIC/37° male rigid
Part numberHose sizeThread
4TA4MJ4-047/16-20
4TA5MJ4-041/2-20
4TA5MJ5-051/2-20
4TA6MJ4-049/16-18
4TA6MJ5-059/16-18
Part numberHose sizeThread
Female pipe swivel
N.P.T.F. male pipe swivel
Part numberHose sizeThread
4TA4PS4-041/4-18
4TA4PS5-051/4-18
4TA6PS6-063/8-18
NPSM female pipe swivel
Part numberHose sizeThread
4TA4SP4-041/4-18
4TA6SP6-063/8-18
FRB GB PS PF MB SP MJ MC NR MP MR
4TA6NR6-06 1
Part numberHose sizeThread 4TA10NR10 -101-14
Part numberHose sizeThread
11/16-16
4TA4PF4-041/4-18 Part numberHose sizeThread 4TA6PF6-063/8-18
Part numberHose sizeThread
4TA6MJ6-069/16-18 4TA8MJ6-063/4-16 4TA8MJ8-083/4-16 4TA10MJ8-087/8-14 Part
sizeThread 4TA6MP6-063/8-18 4TA6MP8-083/8-18 4TA8MP6-061/2-14 4TA8MP8-081/2-14 4TA12MP12 -12 3/4-14 4TA16MP16 -16 1-11 1/2 Part numberHose sizeThread 4TA8PS8-081/2-14 4TA12PS12 -12 3/4-14 Part numberHose size Terminal end 4TA10MCA8 -08 -10 4TA10MCB8 -08 -10 4TA10MC8 -08 -10 4TA8MCB8 -08-08 4TA8MC8 -08-08 4TA6MCA6 -06-06 4TA6MCB6 -06-06 Part numberHose size Terminal end 4TA6MC6 -06-06 4TA6MC4 -04-06 4TA6MCA4 -04-06 4TA6MCB4 -04-06 4TA12MCB12 -12-12 4TA12MC12 -12-12 4TA10MC10 -10-10 Part numberHose sizeThread 4TA8MR6-0613/16-16 4TA8MR8-0813/16-16 Part numberHose sizeThread 4TA8SP8-081/2-14 4TA16SP16 -16 1-11 1/2 13 EATON
Page 12
numberHose
Synflex Optimum thermoplastic hydraulic hose and fittings
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
MachineBowlT-400-8XXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
SpacerRingT-400-37X
SpacerRingET313SR-045AXX
SpacerRingET1000SR-M190DXX
MachineBowlT-400-8XXX
ColletT-400-121CXXX
SpacerRingT-400-46XX -05
SpacerRingET1000SR-M190DX
SpacerRingT-400-47RXX
MachineBowlT-400-8XXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
SpacerRingET1000SR-M100AX
SpacerRingET313SR-045AXX
SpacerRingET313SR-060DXX
SpacerRingT-400-37XX
SpacerRingT-400-10XX
MachineBowlT-400-8XXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
SpacerRingET1000SR-M265DX
SpacerRingET1000SR-M190DXX
SpacerRingET1000SR-M395DXX
SpacerRingT-400-62XX
SpacerRingT-400-10XX
Tooling reference Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N Dash size Part type Part number
-04
-06
-08
100R7 100R8 100R18
T-400
14 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 13
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
MachineBowlIntergratedXXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
SpacerRingT-400-37X
SpacerRingET313SR-045AXX
SpacerRingET1000SR-M190DXX
MachineBowlIntergratedXXX
ColletT-400-121CXXX
SpacerRingT-400-46XX -05
SpacerRingET1000SR-M190DX
SpacerRingT-400-47RXX
MachineBowlIntergratedXXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
SpacerRingET1000SR-M100AX
SpacerRingET313SR-045AXX
SpacerRingET313SR-060DXX
SpacerRingT-400-37XX
SpacerRingT-400-10XX
MachineBowlIntergratedXXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
SpacerRingET1000SR-M265DX
SpacerRingET1000SR-M190DXX
SpacerRingET1000SR-M395DXX
SpacerRingT-400-62XX
SpacerRingT-400-10XX
Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7
Dash size Part type Part number -04
3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N
-06
-08
100R7 100R8 100R18
T-465 T-460 T-462
15 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 14
100R7 100R8 100R18
Dash size Part type Part number
MachineBowlT-420-26XXXXXXX
AdapterBowlT-420-25XXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
-04
SpacerRingT-400-37X
SpacerRingET313SR-045AXX
SpacerRingET1000SR-M190DXX
SpacerRingT-400-46XX
MachineBowlT-420-26XXX
AdapterBowlT-420-25XXX
-05
ColletT-400-121CXXX
SpacerRingET1000SR-M190DX
SpacerRingT-400-47RXX
MachineBowlT-420-26XXXXXXXXX
AdapterBowlT-420-25XXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
-06
SpacerRingET1000SR-M100AX
SpacerRingET313SR-045AXX
SpacerRingET313SR-060DXX
SpacerRingT-400-37XX
SpacerRingT-400-10XX
MachineBowlT-420-26XXXXXXXXX
AdapterBowlT-420-25XXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
-08
SpacerRingET1000SR-M190DXX
SpacerRingET1000SR-M395DXX
SpacerRingT-400-62XX
SpacerRingT-400-10XX
MachineBowlT-420-26XXX
ColletET1000DC-M250SXXX
-10
SpacerRingT-400-46RX
SpacerRingET420SR-M495AXX
MachineBowlT-420-26XXXXXXXX
ColletT-420-30CXXXX
ColletET1000DC-M295SXX
ColletT-420-86CXX
-12
SpacerRingT-420-29XX
SpacerRingT-400-10XX
SpacerRingET1000SR-M115DXX
SpacerRingET420SR-M215AXX
MachineBowlT-420-26XXXXXXXX
ColletT-421-10CXXXX
ColletET1001DC-M390SXXXX
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
-16
SpacerRingET420SR-M660AXX
SpacerRingET425SR-240AXX
SpacerRingET420SR-M215AXXXX
Tooling reference Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N
T-420
16 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 15
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
-05
MachineBowlT-420-26XXXXXXX
AdapterBowlT-420-25XXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
SpacerRingT-400-37XXX
SpacerRingET1000SR-M190DXX
SpacerRingT-400-46XX
MachineBowlT-420-26XXX
AdapterBowlT-420-25XXX
ColletT-400-121CXXX
SpacerRingET1000SR-M190DXXX -06
MachineBowlT-420-26XXXXXXXXX
AdapterBowlT-420-25XXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
SpacerRingET1000SR-M100AXXX
SpacerRingET313SR-060DXX
SpacerRingT-400-37XX
SpacerRingT-400-10XX
MachineBowlT-420-26XXXXXXXXX
AdapterBowlT-420-25XXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
-08
SpacerRingET1000SR-M265DX
SpacerRingET1000SR-M190DXX
SpacerRingET1000SR-M395DXX
SpacerRingT-400-62XX
SpacerRingT-400-10XX
MachineBowlT-420-26XXX
ColletET1000DC-M250SXXX
-10
SpacerRingT-400-46RXXX
SpacerRingET420SR-M495A
MachineBowlT-420-26XXXXXXXX
ColletT-420-30CXXXX
ColletET1000DC-M295SXX
ColletT-420-86CXX
-12
SpacerRingT-420-29XX
SpacerRingT-400-10XX
SpacerRingET1000SR-M115DXX
SpacerRingET420SR-M215AXX
MachineBowlT-420-26XXXXXXXX
ColletT-421-10CXXXX
ColletET1001DC-M390SXXXX
-16
SpacerRingET420SR-M660AXX
SpacerRingET425SR-240AXX
SpacerRingET420SR-M215AXXXX
Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N Dash size Part type Part number
-04
100R7 100R8 100R18
T-480
17 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 16
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
Tooling reference ET4001 Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7
Dash size Part type Part number -04 MachineBowlET4000AR-001XXXXXXX AdapterBowl T-410-25 XXXXXXX Collet T-400-109C XXXXX Collet T-400-121C XX SpacerRing T-410-39 X SpacerRing ET4000SR-M100A XX SpacerRing ET4000SR-M190D XX SpacerRing T-410-78R XX -05 MachineBowl ET4000AR-001 XXX AdapterBowl T-410-25 XXX Collet T-400-121C XXX SpacerRing ET4000SR-M190D X SpacerRing T-440-79R XX -06 MachineBowl ET4000AR-001 XXXXXXXXX AdapterBowl T-410-25 XXXXXXXX Collet T-400-110C XXXXX Collet ET401DC-M195S XXXX SpacerRing ET4000SR-M100A XXX SpacerRing T-440-79R XX SpacerRing T-410-39 XX SpacerRing T-400-10 XX -08 MachineBowl ET4000AR-001 XXXXXXXXX AdapterBowl T-410-25 XXXXXXXXX Collet T-400-41C XXXXX Collet ET401DC-M230S XXXX SpacerRing T-410-10 X SpacerRing ET4000SR-M190D XX SpacerRing T-410-11 XX SpacerRing T-410-41 XX SpacerRing T-400-10 XX -10 MachineBowl ET4000AR-001 X ColletT-440-85CX SpacerRingET4000SR-M405AX -12 MachineBowlET4000AR-001XXXXXXXX ColletT-440-85CXXXXX ColletET4000DC-M320SXX ColletT-440-86CX
-16 MachineBowlET4000AR-001XXXXXXXX ColletT-470-16CXXXX ColletET4001DC-M380SXXXX SpacerRingET4000SR-M560AXX SpacerRingET525SR-195AXX SpacerRingT-440-82RXXXX 100R7 100R8 100R18
3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N
SpacerRingET4000SR-M405AXX SpacerRingET4000SR-M180AXXXX SpacerRingET4000SR-M560AXX
ET4000
18 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 17
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
MachineBowlT-410-26XXXXXXX
AdapterBowlT-410-25XXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
SpacerRingT-410-39X
SpacerRingET4000SR-M100AXX
SpacerRingET4000SR-M190DXX
SpacerRingT-410-78RXX
MachineBowlT-410-26XXX
AdapterBowlT-410-25XXX
ColletT-400-121CXXX
SpacerRingET4000SR-M190DX
SpacerRingT-440-79RXX
MachineBowlT-410-26XXXXXXXXX
AdapterBowlT-410-25XXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
SpacerRingET4000SR-M100AXXX
SpacerRingT-440-79RXX
SpacerRingT-410-39XX
SpacerRingT-400-10XX
MachineBowlT-410-26XXXXXXXXX
AdapterBowlT-410-25XXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
SpacerRingT-410-10XXX
SpacerRingET4000SR-M190DXX
SpacerRingT-410-11XX
SpacerRingT-410-41XX
MachineBowlT-410-26X
-10
ColletT-440-85CX
SpacerRingET4000SR-M405AX
MachineBowlT-410-26XXXXXXXX
ColletT-440-85CXXXX
ColletET4000DC-M320SXX
ColletT-440-86CXX
SpacerRingET4000SR-M405AXX
SpacerRingET4000SR-M180AXXXX
SpacerRingET4000SR-M560AXX -16
MachineBowlT-410-26XXXXXXXX
ColletT-470-16CXXXX
ColletET4001DC-M380SXXXX
SpacerRingET4000SR-M560AXX
SpacerRingET525SR-195AXX
SpacerRingT-440-82RXXXX
Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N Dash size Part type Part number -04
-05
-06
-08
-12
100R7 100R8 100R18
T410 & T440
19 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 18
For additional crimp machine configurations and all crimp specs, please visit: eatonpowersource.com
AdapterBowlET1000AR-001XXXXXXX
ColletT-400-109CXXXXX
ColletT-400-121CXX
ColletET401DC-M195S
SpacerRingT-400-37XXX
SpacerRingET1000SR-M190DXX
SpacerRingT-400-46XX
AdapterBowlET1000AR-001XXX
-05
ColletT-400-121CXXX
AdapterBowlET1000AR-001XXXXXXXXX
ColletT-400-110CXXXXX
ColletET401DC-M195SXXXX
SpacerRingET1000SR-M100AXXX
SpacerRingET1000SR-M190DXXX -06
SpacerRingET313SR-060DXX
SpacerRingT-400-37XX
SpacerRingET1000C-0012XX
AdapterBowlET1000AR-001XXXXXXXXX
ColletT-400-41CXXXXX
ColletET401DC-M230SXXXX
SpacerRingET1000SR-M265DX
-08
SpacerRingET1000SR-M190DXX
SpacerRingET1000SR-M395DXX
SpacerRingT-400-62XX
SpacerRingT-400-10XX
ColletET1000DC-M250SXXX
-10
SpacerRingT-400-46RXXX
ColletT-420-30CXXXX
ColletET1000DC-M295SXX
ColletT-420-86CXX
-12
SpacerRingT-420-29XX
SpacerRingET1000C-0012XX
SpacerRingET1000SR-M115DXX
SpacerRingET420SR-M215AXX
ColletT-421-10CXXXX
ColletET1001DC-M390SXXXX
-16
SpacerRingET420SR-M660AXX
SpacerRingET425SR-240AXX
SpacerRingET420SR-M215AXXXX
Tooling reference Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N Dash size Part type Part number -04
100R7 100R8 100R18
ET1000
20 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 19
FT1380
Target setting in matrix
Fitting 4TA TTC/Z w/ sleeve (FF91064) Hose 3TR7 3TR7N3TR83TR8N3TR18CT3TR73TR7N3TR83TR8N Dash size Machine Die cage part number -04 FT1380 ET1187 FT1380-200-M1504040408080 FT1380-200-M1654545 FT1380-275-M1504040408080 FT1390FT1307-200-M150328328271271323246246 -05 FT1380FT1380-200-M150100100108 ET1187FT1380-275-M150100100108 FT1390FT1307-200-M150262262270 -06 FT1380 ET1187 FT1380-200-M1805555353560105105 FT1380-275-M1805555353560105105 FT1380-200-M20035 FT1380-275-M2003535 FT1380-200-M210 3535 FT1380-275-M210 3535 FT1390 FT1307-200-M180221221279279225271271 FT1307-200-M210 193193 -08 FT1380 ET1187 FT1380-200-M210808011511590 FT1380-275-M210808011511590 FT1380-200-M2405050 100100 FT1380-275-M2405050 100100 FT1390 FT1307-200-M210243243288288260 FT1307-200-M240223223 237237 -10 FT1380 ET1187 FT1380-200-M28015 FT1380-275-M28015 FT1381-200-M28015 FT1380-200-M2409494 FT1380-275-M2409494 FT1390FT1307-200-M240263263 -12 FT1380 ET1187 FT1380-200-M28015155050 FT1380-275-M28015155050 FT1381-200-M28015155050 FT1380-200-M3203535 5050 FT1380-275-M3203535 5050 FT1381-200-M3203535 5050 FT1381-275-M320 5050 FT1390 FT1307-200-M280160160224224363363 FT1307-200-M320205205 241241 -16 FT1380 ET1187 FT1380-200-M37030304545155155 4545 FT1380-275-M37030304545155155 4545 FT1381-200-M37030304545155155 4545 FT1381-275-M37030304545155155 4545 FT1382-200-M37030304545155155 4545 FT1382-275-M37030304545155155 4545 FT1390FT1307-200-M370211211223223329329 334334
ET1187
For additional variable crimp specs for other machines, please visit: eatonpowersource.com 100R7 100R8 100R18
21
Page 20
FT1390
EATON
Synflex Optimum thermoplastic hydraulic hose and fittings
This chart is intended to serve as a guide and does not guarantee suitability of hose material with the chemicals listed. Final selection of materials is dependent on many factors including variations in temperature, pressure and duration of exposure.
Hose Material Key N = Nylon H = Polyester Resistance Rating Key G = Good P = Poor L = Limited NT = Not Tested N H N H N H Acetaldehyde G G Carbon Bisulfide G L †Ethylene Glycol G G Acetic Acid L L Carbon Disulfide G L Ethylene Oxide G L Acetic Anhydride L L Carbon Monoxide G G Fatty Acid G G Acetone G L Carbon Tetrachloride G P Ferric Chloride L NT Acetyl Bromide P P Carbonic Acid G L Ferric Sulphate G G Acetyl Chloride P P Castor Oil G L Fluoboric Acid NT P Acetylene G G Caustic Potash (>20%) L L Fluorine P P Air G G Caustic Potash (<20%) G L Fluorosilicic NT NT *Alcohols G L Caustic Soda (>20%) L L Formaldehyde G L Aluminum Chloride P NT Caustic Soda (<20%) G L Formic Acid P P Aluminum Sulphate G NT Cellusolves Union Carbide G P Freon G L Alums P NT Cellulubes Celanese (Hydraulic *Fruit Juices G G Ammonia Gas P P Fluid, Phosphate Ester Base) G P Fuel Oil (Aromatic Gas) Ammonium Chloride G G Chloracetic Acid P P 100 Octane G G Ammonium Hydroxide P P Chloroform G P Fuel Oil G G Ammonium Nitrate G L Chlordane G G Furfuryl Alcohol G G Ammonium Phosphate G L Chlorinated Solvents G P Galic Acid (<20%) G L Ammonium Sulphate G L Chlorine (Dry) P P ** Gas (Natural) G G Amyl Acetate G L Chlorine (Water) (<20%) L P Gas Oil G GL Amyl Alcohol G G Chromic Acid P P Gasoline G G Anethole G NT Chromium Salts G G Gasoline (Aromatic) G G Aniline L P *Cider G G Gasoline (Non-Aromatic) G G Animal Oils G G Citric Acid G L Gelatin G G Antimony Salts G G Coal Gas G G Glucose G G Apoclor Monsanto (Chlorinated Copper Chloride L G Glue (Depends on type) G G Hydrocarbon Hydraulic Fluid) G L Copper Sulphate G G †Glycerine G G Aromatic Hydrocarbons G L *Corn Oil G G †Glycol G G Arsenic Salts G G Cottonseed Oil G G Greases G G Asphalt G G Creosote P P Heavy Water (D2O) G G Auto Transmission Fluid G G Cresols P P Heptane G G Barium Chloride G G Cresylic Acid P P Hexane G G Barium Salts G G Crude Petroleum Oil G L †Houghto Safe Houghton 600 Basic Copper Arsenate G G Cupric Sulphate L L Series (Hyd. Fluid Water Benzaldehyde G G Cyclohexane G G Glycol Base) G L Benzene G L Cyclohexanone G G †Houghto Safe Houghton 1000 Benzoic Acid G P Decalin G NT Series (Phosphate Ester Benzol (Benzene) G L Diacetone Alcohol G L Base) G L Benzyl Alcohol L L Diammonium Phosphate G L Hydraulic Fluid Petroleum Base G G Borax G G Dibutyl Phthalate G L †Hydraulic Fluid Water Glycol Bordeaux Mixture G G Diesel Fuel G G Base G G Boric Acids G G Diethanolamine (20% conc.) G L †Hydraulic Fluid Boric Copper Sulphate G G Diethyl Ether G L Phosphate Ester G L Bromine P P Dioctyl Phosphate G L Hydraulic Oil G G Butanol G G Dioctylphthalate G L Hydrochloric Acid (10%) G P * Butter G G Enamels G G Hydrocyanic Acid P NT Butyl Acetate G L Essential Oils G G Hydrofluoric Acid P P Calcium Arsenate G G * Ethanol G L Hydrogen Gas G G Calcium Bisulphide G G Ether G L Hydrogen Peroxide (dil.) G G Calcium Chloride G G Ethyl Acetate G L Hydrogen Peroxide (conc.) P P Calcium Hydroxide (<20%) G L * Ethyl Alcohol G L Hydrogen Sulphide L L Calcium Hypochlorite G L Ethyl Chloride G P †Hydrolube Union Carbide— Calcium Salts G G Ethylene Chlorhydrin P P (Hydraulic Fluid Water Glycol Carbolic Acid P P Ethylene Dichloride G P Base) G L
Chemical resistance data
22 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 21
N H N H N H †Irus Shell 902 Hydraulic Fluid Oleic Acid G G Sodium Sulphate G G (Water-Oil Emulsion) G G OS 45 Monsanto Hydraulic Fluid Sodium Sulphide G G Isocyanates G G (Silicate Ester Base) G L Sodium Thiosulphate G G Isopropyl Acetate G L Oxalic Acid (-30%) G L Solutions/Emulsions 2-4D Kerosene G G Oxygen Refer to Factory DDT Preparation Hydroxy Ketones G L Ozone G G Quinoline G NT Lacquer Solvents G L Paint (Oil Base) G G Stannous Chloride L G Lactic Acid G NT Paint Solvents (Oil Base) G L Steam P P Lard G G Palmitic Acid G G Stearic Acid G G Lead Arsenate G G Pentane G G Stearin G G Lead Sulphate G G Perchloric Acid P P Stoddard Solvent G P Lead Tetramethyl G G Perchlorethylene G P Styrene G L Lime G G Petroleum Oils (Sour) G L Sulphur G G Linseed Cake G G Petroleum Oils (Refined) G G Sulphur Dioxide P P Linseed Oil G G Phenolates L L Sulphur Trioxide L P Lubricating Oils, Petroleum Phenols P P Sulphuric Acid (dil.) L LP Base G G Phosphoric Acid G P Sulphuric Acid (conc.) P P †Lubricating Oils, Diester Base G L Picric Acid L P Sulphurous Acid P LP Magnesium Chloride G G Potash (Potassium Hydroxide) L P Tannic Acid G L Magnesium Hydroxide G L Potassium Chloride G G Tar Oil G G (<20%) Magnesium Sulphate G G Potassium Hydroxide Tartaric Acid G G Maleic Acid G L (50% conc.) L P Toluene G L Mercuric Chloride G G Potassium Nitrate G G Toluol G L Mercury G G Potassium Permanganate Tributyl Phosphate G L **Methane G G (5% conc.) P P Tricesylphosphate G L Methanol G L Potassium Sulphate G G Trichloracetic Acid P P Methyl Acetate G L Propane G G Trichloroethylene G P Methyl Bromide L P †Pydraul (Stauffer) F-9, 150, 600, †Trisodium Phosphate Solution G L Methyl Chloride G P 625 G L Turpentine G G Methyl Sulphate G G Pyrethrum G G †Ucon Union Carbide (Hydraulic Methylethylketone (MEK) G L Pyridine L L Fluid Water Glycol Base) G L Methylisobutylketone (MIBK) G L †Sea Water G G Urea G L *Milk G G †Skydrol Monsanto 500, 7000 G P Uric Acid G P Mineral Oil G G †Soap Solution (conc.) G G Varnish G G Molasses G G * † Soda Water G G Vinegar G L Mustard G G Sodium Bicarbonate G G † Water (150°F) G G Naphtha G L Sodium Bisulfite G G White & Bagley No. 2190 Cutting Naphthalene G L Sodium Borate G G Oil G NT Nickel Chloride P P Sodium Carbonate G G *Wine G G Nicotine G G Sodium Chloride G G Wool Oil G G Nitric Acid (<20%) L L Sodium Cyanide G G Xylol G L Nitric Acid (>20%) L P Sodium Hydroxide (<20%) G L Xylene G L Nitrobenzene G P Sodium Hypochlorite L L Zinc Chloride G G * Nitrous Oxide G G Sodium Nitrate G G Zinc Hydrate P L Oil G G †Sodium Phosphate Solution G G Zinc Sulphate P L * Oil of Turpentine G G Sodium Silicate G G Series Core 3TR7 Nylon 3TR7N Nylon 3TR8 Nylon 3TR8N Nylon 3TR18CT Polyester Hose Material Reference Chart
† Recommended operating temperature not to
+150°F (+66°C) ** Does
AGA
UL compliance ‰ Recommended operating temperature not to exceed +100°F (+37.8°C) 23 EATON Synflex Optimum thermoplastic hydraulic hose and fittings Page 22
* Does not imply NSF or FDA compliance
exceed
not imply
or
Eaton is a registered trademark. All other trademarks are property of their respective owners. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2020 Eaton All Rights Reserved Printed in USA Publication No. E-HOTH-BB007-E3 November 2020 Page 23
Eaton Synflex Optimum Thermoplastic hydraulic hose and fittings North America
