THE RECORDING PROCESS

By Frank Demilt

The recording process is arguably the most important step in accellerating your music career. The listener decides within the first bar if they want to continue listening. A song with great sound quality can make the listener continue listening, even if they’re unfamiliar with the artist, whereas bad sound quality can turn the listener off before the song begins. The following article, excerpted from producer-engineer Frank Demilt’s recent book, The Blueprint: A Bible for Becoming a Successful Performing Artist in the Digital Age, will set you on the right path.

Create Your Session

The first step in recording is to create your recording session. Each DAW has a set of pre-made templates for different recording styles. These pre-made templates are constructed by the makers of each DAW and equipped with the necessary tracks and routing for a seamless recording. Creating your own recording template is also an option, but this can be complicated. The issue is the intricacy that goes into creating your own session. You will need “audio tracks” to record each of your vocal takes, “auxiliary tracks” used for controlling multiple tracks at one time, “efx tracks” for your desired vocal efx, and a “master track” to control the overall volume of your session. Ensuring these tracks are set up properly can be difficult, but creating your own session can be beneficial.

Set Your Input Volume

The second step is to set your input volume on your interface so that your audio is not distorting. If the track is at a good level, the meter will be green; if the track is at a slightly high level the meter will be yellow; and if the track is too high, the meter will be red. While visual cues are good, use your ears, they are your best friends in this process.

Set The Volume of the Beat

Lastly, before recording, set the volume of the beat you’re using. DO NOT TURN YOUR VOCALS UP SO YOU CAN HEAR THEM OVER THE BEAT WHEN THE BEAT IS AT 0 DB! This will cause your vocals to distort immediately and will make it impossible to create the proper blend when mixing. A rule of thumb I learned in one of my first internships is turn the beat down to -10db. Using this level mark will create more headroom in your recording, allowing for a better sound quality during the mixing process.

Check Your Vocal Distance

Now think about the distance of the microphone from your mouth, as this will relate to the perceived character of the recording. Being close to the microphone produces a tight, warm, breathy, detailed recording. However, this positioning will also enunciate all the sounds of the mouth and create greater vocal pops and sibilance. On the other hand, standing about 10 to 16 inches from the microphone when recording will produce a more natural, open, and less “in your face” vocal, and it is less likely to suffer from excessive sibilance and more natural room sounds to your recording, which are not always desired. This distance will allow for the least amount of natural room sound, less emphasis on mouth sounds, and create a more even recording. Most people don’t realize how important this step is. Microphone type, combined with position, is 80% of your vocal sound.

Record Voice with efx or Dry?

The last step of the pre-production process is deciding if you want to record with efx on your voice, or if you want to record “dry.” If you record with efx, you have a myriad of plug-in options that allow for digital audio manipulation. If you use plug-ins on your recording track, you will hear a difference in your voice according to what plug-ins you add.

Once the pre-production process is complete, the first vocal you’re going to record is the lead vocal. You want this vocal to be clear, strong, have feeling and be believable. This is the baseline for the rest of your vocal takes. If you’re mumbling, the audience won’t be able to sing along. If your lead lacks feeling, or believability, you won’t keep your listeners’ attention. Your lead vocal is the most important part of your song. A good lead can propel a song to great heights. A bad lead can make a song crash and burn.

Stacks and backing tracks are used to emphasize certain words and phrases throughout the song. For singers using this technique, these will not be in the same tone but rather a harmony note. Generally, for the hook there will be at least two stacks of the lead vocal panned hard left and right to create a surrounding effect, giving the impression of a wider vocal. Not every song needs this technique; you will have to make this decision depending on the style of the song.

Vocal Harmonies

Whether you are a rapper, a singer, or somewhere in between, harmonies and background vocals are an essential part of the song. These vocals emphasize and support your lead, giving the listener different vocal tones that change their listening experience throughout