THE
NANZ C O M PA N Y
C ATA L O G U E
N 5 O
T H E
N A N Z
C O M P A N Y
T A B L E
O F
C O N T E N T S
REFERENCE MATERIAL ...........................................................................................................1 CLASSIC HARDWARE .............................................................................................................5 Knobs Custom Monograms Levers Tilt & Turn Levers Lift & Slide Levers NANZCRAFT .............................................................................................................................21 Knobs & Levers STUDIO LINE .............................................................................................................................25 Knobs & Levers POWDER COAT..........................................................................................................................35 HINGES .......................................................................................................................................37 Door Hinges Finials Cabinetry Hinges LOCKSETS ..................................................................................................................................43 Mortise Locks Cremone Bolts Bolts & Edge Pulls HOOKS & CASEMENT STAYS.................................................................................................51 RECESSED & RING PULLS ......................................................................................................53 THE FACTORY ..........................................................................................................................59 THUMBLATCHES & DOOR PULLS .......................................................................................61 THUMBTURNS ..........................................................................................................................65 KEYHOLE PLATES .....................................................................................................................68 CYLINDER TRIM........................................................................................................................71 ROSETTES & BACKPLATES....................................................................................................73 ESCUTCHEONS & PUSHPLATES ..........................................................................................75 HANDLE & ESCUTCHEONS...................................................................................................81 DOORSTOPS ..............................................................................................................................85 FRONT DOOR HARDWARE ...................................................................................................87 ELECTRICAL PLATES...............................................................................................................89 CABINET HARDWARE ............................................................................................................91 FINISHES ....................................................................................................................................101
© The Nanz Company 2012. The photographs, drawings and copy were created in our SoHo studio and the catalogue was designed and published in-house by the company’s design department. All hardware designs, images, and other copyrightable works, including text and graphic images are owned by The Nanz Company. All rights reserved 1989-2012. NANZ is a registered trademark of The Nanz Company.
i
CHASING TEXTURES & PATTERNS ....................................................................................103 BATH HARDWARE ...................................................................................................................105 DESIGN CREDIT.........................................................................................................................119
ii
T H E
N A N Z
C O M P A N Y
T H E
N A N Z
C O M P A N Y
THE COMPANY The Nanz Company designs and manufactures premium-quality door and cabinet hardware. Based in New York with a 50,000 square-foot factory on Long Island, the Company sells products through architects, designers, and contractors and maintains showrooms in New York, Los Angeles, Chicago, Greenwich, and London. Manufacturing products on a project-by-project basis, the company combines modern manufacturing with old-world finishing techniques. Our products are of the highest quality available and our ability to manufacture custom parts is unsurpassed. Combining a talented design team and a vast archive of samples and reference material, the company is particularly adept at new product development and prototyping. The company maintains an elaborate workshop equipped with lathes and mills in the Manhattan headquarters. Nanz is efficient in preparing architects and designers for client presentations. Accordingly, our sample collection contains thousands of examples of products in a vast array of finishes.
THE CATALOGUE Our fifth catalogue is designed to assist in preliminary selection and to serve as a tool to review hardware specified on existing orders. It is an extensive but not comprehensive selection of our available products. Visit our on-line catalogue at nanz.com to see a more up-to-date listing of product offerings and all dimensional information. The photographs, drawings, and copy were created in our SoHo studio and the catalogue was designed and published inhouse by our graphic design department. All hardware designs, images, and other copyrighted works, including text and graphic images displayed in this catalogue are owned by The Nanz Company.
THE PROCESS Engaged in project-by-project manufacturing, The Nanz Company assists clients with the selection, specification, scheduling, and coordination of hardware on high-end projects. Most often, the company specifies and manufactures hardware for a project in its entirety. Given sufficient quantity however, some products can be ordered separately. The ability to fill such orders will be reviewed on a case-by-case basis. The sales staff quotes lead times based on the specifics of an order and our current production schedule. When tight schedules require expedited delivery, Nanz can propose alternate designs and finishes to accommodate time constraints. Locks and hinges can often be shipped prior to shipment of the full order. Templates can be shipped within 48 hours from receipt of deposit.
CUSTOM WORK Nanz has the capability to provide virtually any custom hardware required for a project. Our design and engineering team can design geometric, organic and classical products through the use of traditional pencil and paper techniques combined with both 2-D and 3-D software packages. Our Manhattan-based design studio employs in-house rapid prototyping capabilities to create models for client presentation and approval. Typically we will provide a budgetary estimate prior to providing a quotation. Design and engineering work starts upon the receipt of a deposit. Tooling, fixturing, patterns, and molds must be approved prior to production. While much of our custom work is proprietary, we invite you to review selected examples in our collection of archival and custom designs.
WARRANTY Nanz Hardware is manufactured with the utmost care and attention to detail. Accordingly, every product we sell is guaranteed to be free from defects in materials and workmanship. Any defective hardware will be repaired or replaced free of charge. This warranty is limited to the end-user for whose project the hardware was purchased. Nanz finishes are “living finishes” and are designed to improve and change through use and the passage of time. Finishes are therefore not covered by this warranty.
1
SHOWROOMS The Nanz Company headquarters is located in an 8,000 square-foot loft in New York’s SoHo district. Within this space is a by-appointment showroom. Uptown, across the street from the famed D&D Building, Nanz maintains a to-the-trade showroom. Chicago’s Merchandise Mart houses our Midwest showroom on the ground floor. In Connecticut, our showroom is located at the top of Greenwich Avenue and our Los Angeles showroom is located among the antique shops that line La Cienega near Melrose. Our London space is located within the Design Centre at Chelsea Harbour. Florida-based representatives oversee our southeastern projects from the Nanz Miami office. NEW YORK - SOHO 20 Vandam Street, 5th Floor New York NY 10013 Tel 212 367 7000 M-F 9:00-5:00 by appointment
NEW YORK - UPTOWN 213 East 59th Street New York NY 10022 Tel 212 367 7000 M-F 9:00-6:00
GREENWICH 44 West Putnam Avenue Greenwich, CT 06830 Tel 203 629 1000 M-F 9:00-6:00
LOS ANGELES 808 North La Cienega Blvd. Los Angeles CA 90069 Tel 310 358 9100 M-F 9:00-5:00
CHICAGO Merchandise Mart, Suite 103 Chicago IL 60654 Tel 312 527 1300 M-F 9:00-5:00 Sat 10:00-3:00
LONDON 420 Design Centre East Chelsea Harbour London SW10 0XF Tel 020 7349 0643 M-F 9:30-5:00
MIAMI M-F 9:00-5:00 by appointment Tel 305 531 2224
2
T H E
N A N Z
C O M P A N Y
T H E
N A N Z
C O M P A N Y
PRICING
MEASUREMENTS
The Nanz Company will provide a detailed estimate for a project upon receipt of floor plans with numbered doors and a corresponding door schedule. Pricing is based on product and finish selection, as well as the size and complexity of the project. Once the estimate has been approved, Nanz will provide a door-by-door schedule with exact pricing. For more information, see the Order Management section.
Measurements for all products are available on-line at nanz.com. Paper templates are available online and threedimensional templates may be provided upon receipt of an order. All item measurements are in inches. Fixed pulls that are mounted through a surface are measured from the centers of the posts, and surface-mounted pulls such as bin pulls are measured fully from one end to the other. Levers are measured from the center of the shank to the handle’s end. Backset is the horizontal distance from the edge of the door to the center of the handle in mortise locksets and rim locks. Recessed pull projections are from the surface of the door into the room.
Nanz will provide a preliminary estimate upon receipt of a written request. Please email the following information to pricing@nanz.com and include the project name in the subject. We will confirm receipt promptly. 1. Project Name 2. Approximate Number of Doors
3. Handle and Hinge Selection 4. Finish Selection
HANDING Door Conditions - Hand of Door is Always Determined from the Outside
SAMPLES If you are unable to visit our showrooms, samples will be made available via Fed Ex or UPS for client presentations. We ask that a memo account be set up and that the borrowing firm pay for both the next-day delivery and return of these samples. Please make the request a week prior to the required date. Samples are not for sale.
LEFT HAND
Outside
RIGHT HAND
LEFT HAND REVERSE
Outside
RIGHT HAND REVERSE
To request samples, please email the following to samples@nanz.com and include the project name in the subject. We will confirm receipt promptly.: 1. 2. 3.
4. 5. 6.
Project Name Approximate Number of Doors Credit Card No. and Expiration Date
Sample List by Product Number Finishes under Consideration Date of Presentation
ORDER MANAGEMENT A project manager is assigned to each order. Using proprietary relational database software, all hardware is specified and scheduled on a door-by-door basis. This schedule is issued to the architect or contractor for review. Upon receipt of client approval, Nanz will begin production of the order. The project manager coordinates the project and provides specification information, finish samples, templates, and coordination with the various trades as required. Ultimately, the product is delivered packaged and labeled by door. This service is critical to ensuring an efficient installation. Nanz makes a point of being available during the installation process to answer questions, make recommendations or assist with punch-list items as needed.
THE FACTORY The Nanz factory, located on Long Island, is a 50,000 square foot, state-of-the-art plant employing computer technology as well as traditional techniques. Nanz controls all aspects of manufacturing, from engineering, pattern making, casting, machining, chasing, plating, and finishing, to door-by-door packing and shipping. The factory is capable of producing an almost limitless variety of decorative and functional hardware. The production of each order is managed through a paperless network of control, which directly links Project Managers in Manhattan with the factory. Orders with even the most complex specifications are executed accurately. A collection of photos chronicling our manufacturing processes appears on pages 59-60.
3
NANZ CONTRACT, INC. With years of experience as a manufacturer of high-end residential hardware, The Nanz Company is well acquainted with the requirements of discerning clientele. Our contract division has been developed to bring the same level of design, quality, and detail to speculative residential developments worldwide. Addressing these needs through modified designs and manufacturing methods, Nanz Contract will assist in developing the best possible hardware package to suit your aesthetic, functional, and budgetary requirements. While we are uniquely equipped to provide entirely custom product, most clients begin by choosing from our current collection. Pricing is based on product selection, finish, and the size and complexity of the project. For further information, or to request an estimate for Nanz Contract products and services, please contact your salesperson or email pricing@nanz.com.
BRUSSO, INC. The Nanz Company owns Brusso Incorporated, the premier manufacturer of precision box, cabinetry, and furniture hardware. With dozens of hinge products, handles, latches and other accessories made in both brass and stainless steel, Brusso hardware is specified for high-end residential cabinetry and for use in many yacht projects. Brusso products are in stock and ready to ship. To see the full product line go to brusso.com.
4
T H E
N A N Z
C O M P A N Y
The Nanz Company manufactures the finest door and cabinet knobs. Usually available in nine sizes and designed to accompany a vast array of roses and escutcheon plates, knobs are sold individually. Door knobs include a rosette and mounting hardware. Handles may be used with tubular latches and locks, traditional full mortise sets or cremones and can also be used as fixed pulls. Knobs are typically part of a suite of aesthetically related products. As with other Nanz products, all handles are available in all standard and custom plated and patinated finishes. The following images will assist in the design selection process. For all additional information regarding dimensions, available sizes and applications visit our online catalogue at nanz.com
5
D O O R
K N O B S
No 1003
No 1004
No 1005
No 1006
No 1007
No 1007H
No 1008
No 1010
No 1013
No 1014
No 1017
No 1018
No 1019
No 1019F
SS
6
No 1011
SS
T H E
N A N Z
C O M P A N Y
D O O R
K N O B S
No 1020
No 1024
No 1025
No 1070
No 1071
No 1075
No 1028
No 1030
No 1030F
No 1083R
No 1084
No 1085R
No 1032B
No 1034
No 1036
No 1086
No 1087
No 1088
No 1045
No 1051
No 1053
No 1092D
No 1104
No 1107
No 1054
No 1060
No 1065
No 1114
No 1116
No 1118
7
8
AWA
T H E
N A N Z
C O M P A N Y
D O O R
K N O B S
No 1119
No 1124
No 1128
No 1230
No 1236
No 1237
No 1145
No 1160
No 1175
No 1238
No 1240
No 1246
No 1187
No 1201
No 1204R
No 1260
No 1265
No 1271H
No 1205
No 1206
No 1209
No 1283
No 1305P
No 1305B
No 1215
No 1224
No 1228
No 1307
No 1310
No 1315
9
AA
10
T H E
N A N Z
C O M P A N Y
No 1316
No 1317
No 1324
No 1421WT
No 1423WT
No 1425WT
No 1430
No 1432
No 1438
No 1538
No 1228M
No 1745
No 1879
No 1992
No 1903
11
E M B L E M A T I C
SS
K N O B S
Emblematic hardware dates to the time of the French monarchy when kings would appoint a royal hardware maker to be in charge of manufacturing hardware for the royal residences. Knobs, locks and escutcheon plates would be personalized with the family’s initials, crest, or other symbolism. Nanz provides monogrammed hardware based on existing patterns customized to a clients initials and preferences. Whether using three dimensional casting methods or engraving techniques, art work is provided prior to manufacturing for client approval. Above are some examples from our archives from which clients may choose.
12
T H E
N A N Z
C O M P A N Y
The Nanz Company manufactures levers in a wide range of shapes to suit an array of design requirements. While typically used to operate traditional locks and latches, when fitted with our range of European-style escutcheons for tilt & turn, multi-point, and lift & slide hardware, our levers can be used for all applications throughout a project. Mechanisms for tilt & turn, multi-point, and lift & slide hardware are fabricated entirely of stainless steel and are exclusive to The Nanz Company. Levers are priced individually and include a rose and mounting hardware. Many designs are manufactured in multiple sizes to accommodate various applications such as entry or over-sized doors, small closet doors, windows, or cremones. Levers are typically part of a suite of aesthetically related products. As with other Nanz products, all levers are available in all standard and custom plated and patinated finishes and modifiable for specific conditions. For all additional information regarding dimensions, available sizes and applications visit our online catalogue at nanz.com.
13
L E V E R
H A N D L E S
No 2003
No 2004
No 2005
No 2006
No 2007
No 2008
No 2009
No 2011
No 2012
No 2013P
No 2013B
No 2013S
No 2014P
No 2014B
No 2015
No 2016
No 2017
No 2018
14
T H E
N A N Z
C O M P A N Y
L E V E R
H A N D L E S
No 2019
No 2020
No 2021
No 2080
No 2082
No 2083
No 2025
No 2030
No 2033
No 2085
No 2086
No 2091
No 2034
No 2035
No 2045
No 2094
No 2095
No 2096
No 2055B
No 2058
No 2060
No 2100
No 2106
No 2107
No 2064
No 2065
No 2066
No 2110
No 2111
No 2075
No 2077
No 2079
No 2114
No 2115
SS
15
SS
No 2112
No 2116
16
T H E
N A N Z
C O M P A N Y
L E V E R
H A N D L E S
No 2118
No 2120
No 2121
No 2214B
No 2224
No 2228
No 2124
No 2125
No 2128
No 2230
No 2235
No 2240
No 2130
No 2135
No 2136
No 2250
No 2311
No 2330
No 2142
No 21461
No 2150
No 2335
No 2402
No 2435
No 2162
No 2175
No 2180
No 2510
No 2532
No 2533
No 2195
No 2205
No 2214
No 2535
No 2905
17
RH
18
No 2911