NAC
SCANDIJET PRO Battery powered spray gun
ScandiJet Pro is battery powered, portable, super easy to operate and the most versatile spray gun on the market. Guaranteed! Never has it been so easy, convenient and quick to apply chemicals.
NAC
NEVER HAS IT BEEN SO EASY, CONVENIENT AND QUICK TO APPLY CHEMICALS.
SCANDIJET PRO
ALDRIG HAR DET powered VÆRET SÅspray NEMT,gun BEKVEMT OG HURTIGT AT PÅFØRE KEMIKALIER MED EN Portable, battery and softwash system SPRØJTE
A BRAND NEW PRACTICAL AND POPULAR TOOL FOR THE DISASTER RESTORATION INDUSTRY ScandiJet Pro is battery powered, portable, super easy to operate and the most versatile spray gun on the market. Guaranteed! ScandiJet Pro saves you time, energy and money! And make your work fun and easy!
WHAT MAKES SCANDIJET PRO SO UNIQUE? • Graduated knob to adjust the flow rate of the pump, up to 7 bars. • Continuous spray, without interruption, with uniform pressure and amount of liquid, no troublesome inflation as with compression pumps. • You can treat many m2 in a very short period of time. • No power connection or heavy 12 volt car batteries. • Use the included 9 meter hose or a 2 liter bottle to supply the gun with chemistry. • Different nozzles with spray patterns to suit your needs. • Can spray up to 9 meters in height. • ScandiJet Pro can self-priming directly from your container / tank! Can prime from up to 48 meters distance. • Super fast charger, can recharge the battery in 1-2 hours. • New type of chemical resistant seals ensure long durability. • Spare parts are available. • Two batteries are included in the suitcase.
ScandiJet Pro will become one of your favorite tools and help you with a lot of tasks where chemistry is sprayed on different surfaces such as: floor, wall, ceiling, facade, roof, car, boat, etc
NEW TYPE OF CHEMICAL RESISTANT SEALS MAKES SCANDIJET PRO VERY UNIQUE! The new seals consist of a composition (blend) of viton, polypropylene, polyoxymethylene and polyvinyl chloride, which makes the spray gun even stronger, and one of the most versatile spraying concepts on the market. You can now almost spray any chemical product, even products containing solvents, organic peroxides, hydrochloric acid, d-limonene and sodium hypochlorite.
NAC
SCANDIJET PRO
SCANDIJET PRO IN THE DISASTER RESTORATION INDUSTRY Anyone working in the distaster restoration industry knows the trouble with compression pumps (hand held sprayers), which come in varying quality and which do not hold the pressure – thereby losing their good spray pattern resulting in poor coverage. In order to hold the pressure, the pumps must be continuously inflated and this will cost time and energy – and efficiency will decrease. Many cheap pumps are also not resistant to aggressive chemistry – with a short life expectancy as a result of poor quality.
SCANDIJET PRO FOR ALL TASKS ScandiJet Pro changes all of this, and contributes positively to an effortless, flexible and highly efficient method of applying almost all chemicals used in all types of industie: construction, industry, agriculture and food, public service, private service, transportation, social and health.
HERE ARE SOME EXAMPLES OF USE Application of: • Special cleaners for oxidation and stain removal of mould attacks • Disinfectants for disinfection after water and sewage damage, etc. • Cleaners for cleaning after fire damage, etc. • Descaling products for removing limestone in bathrooms, etc. • Odour control liquids for fire, smoke and all other odours • Special products to prevent mould attacks • Special cleaners for carpets, furniture and other movables • Special sealers for concrete and wood • Herbicides, liquid fertilizers, car care products, degreasing products, roof cleaners and many more ...
e
g a m
a
d e fir
mould
w at er da ma
ge
3
APPLICATIONS / INDUSTRIES CLEANING COMPANIES Apply cleaners, descaling agents, odour treatment, disinfectants, carpet cleaners, floor polishes, window wash, etc.
AGRICULTURE / ANIMALS Animals: Apply detergents, disinfectants and fungicides, odor control agents, insecticides, etc. in stalls, stables, cages and kennels, etc. Agricultural machinery: Apply cleaning fluids, corrosion protection, etc. Weeds: Apply herbicides on outdoor areas.
CAR CARE / AUTO REPAIR / TRANSPORT Apply various car care products, rim cleaner, autoshampoo, engine cleaner, degreasers, floor washers, deodorants, insecticides, trailerwash, window cleaner, tar remover, etc.
INDUSTRIAL AND COMMERCIAL KITCHENS Apply cleaners, disinfectants, descaling agents, etc. in kitchens, refrigerators, storage rooms, etc.
FOOD PRODUCTION Apply cleaners, descaling products, disinfectants, etc. on food machines, wall, ceiling, floor etc.
4
NAC
SCANDIJET PRO
APPLICATIONS / INDUSTRIES BUILDING AND FACADE CLEANING Apply floor polish, cleaners, descaling agents, window cleaners, changing rooms, shower rooms and other surfaces. Descaling agents, facade cleaners etc. Numerous application possibilities.
INDUSTRY / MACHINERY Apply cleaners, degreasers, corrosion protection etc. on machines, motors etc.
JANITORS / CARETAKERS / MAINTENANCE CONTROLLER Apply herbicides and all other chemicals in connection with maintenance of properties, etc.
BRICKWORK / CONCRETE Apply cleaners, algae/moss removers and impregnants. Tips. Apply cleaners with ScandiJet Pro - scrub the surface and use ScandiJet Pro to rinse clean with water.
TILES AND STONE Apply tile cleaners, algae / moss removers and impregnating agents.
5
APPLICATIONS / INDUSTRIES WOODEN DECKING Apply your wood treatment products with ScandiJet Pro: Terraces, algaecide and impregnating agents, and even water and oil based wood protection.
ROOF Fiber cement profiles, brick-, concrete- and steel roofs: Apply cleaners, algae / moss removers and impregnating agents.
GREENHOUSES, PLANT BREEDING, GARDENERS Apply liquid fertilizer products, weed removers, etc. or just water.
RENEWABLE ENERGY Apply cleaning fluids and other chemistry to wind turbines and solar systems.
CONSTRUCTION Apply various chemistry in connection with construction projects.
6
NAC
NAC
SCANDIJET PRO
SCANDIJET PRO
Portable, battery powered spray gun and softwash system The first battery operated spray gun with continuous jet in the world. Our spray gun allows pulverization of any liquid product or low pressure cleaning simply by immersing the hose and its suction strainer in any container. Every part of the spray gun in contact with the product is made of brass or plastic used in the industry (no parts made of aluminium). The joints of the ScandiJet Pro are made of Viton and the nozzles are made of PP and POM, which makes the spray gun compatible with every pulverizable liquid. Flowrate is controlled by the trigger, providing a continuous jet and facilitating the application of chemicals.
You can also adapt every soda bottle with a standard neck in order to use small quantities of product or even homemade preparations. With its continuous jet and incomparable mist nozzle, ScandiJet Pro is very economical, using 3 to 4 times less liquid. Last but not least, the concentrated jet nozzle supplied with the spray gun allows you to spray to a height of 9 meters, reaching the top of trees and roofs easily and safely. You can remove the moss on your roof without climbing. The lightness of the device and the continuous power provided by the battery makes every work on heights safe and easy.
In other words – you get a high-quality tool with lots of possibilities!
7
PACKING LIST This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all the contents from the packaging list are included: 1) “SCANDIJET PRO” spray gun
6) Telescopic extension wand 55-135 cm
2) 2 x Lithium Ion Battery 14.4 V – 2.2Ah
7) Quick Connect Nozzle kit (1 concentrated jet nozzle, 1 flood jet nozzle, 1 flat fan nozzle)
3) Charger
8) Hose clip
4) Brass Strainer/Valve
9) Shoulder strap
5) 9 m PVC Hose 6/8mm (for products container)
10) Instructions manual
7 6
9
4
8 3
1
2 5
8
NAC
SCANDIJET PRO
SCANDIJET PRO DETAILS 2.2 Ah Lithium battery
Battery ejection button
Display of the battery charge level
Fixing for the nozzles and accessories
On / Off trigger
Pressure - Flow control
Joystick to maintain the bottle
Nut for bottle
Demountable strainer Sucking hose for products container Anti-slip grip
SCANDIJET PRO ACCESSORIES
Brass “Quick Connect” nozzle kit
Brass “Quick Connect” nozzle kit 55 - 135 cm
9
USER MANUAL - READ BEFORE USE SCANDIJET PRO - POSSIBLE APPLICATIONS The spray gun is used by thousands of contractors to apply cleaning solutions, sealants, stains, water repellents, mildewcides, insecticides and hundreds of other products. Our unique composition of Viton, polypropylene, polyoxymethylene and polyvinyl chloride make it one of the most versatile spraying systems on the market.
WARRANTY INFORMATION NAC Europe warrantees the ScandiJet Pro spray gun for two years, and the batteries for 6 months from the date of purchase against manufacturing defects or faulty components. This warranty does not cover part failure due to non compliance with operating instructions, normal wear, or tool abuse. Deficient parts or units will be replaced or repaired at the discretion of NAC Europe.
Suitable for applying almost any type of cleaning solutions, including products that contain solvents, peroxide, hydrochloric acid, d-limonene, sodium hypochlorite up to 10%, chlorine up to 20%.
IMPORTANT SAFETY INTRODUCTIONS Be cautious of your surroundings while using this device. Use safety gloves, protective masks, and protective glasses while using the spray gun.
IMPORTANT WARRANTY WILL BE VOIDED IF THE FOLLOWING PROCEDURES ARE NOT FOLLOWED • D uring use, always use the provided filter to prevent debris from clogging the pump.
• O nly use the batteries and charger provided with your ScandiJet Pro spraygun.
• Do not put the spray gun down when the bottle is full.
• W hen batteries are not being used, kaeep them away from any metal objects i.e. paper clips, coins,keys, nails, or screws.
• Chlorine is used diluted to 20%. • D o not use thinners, gasoline, paint removers, solvents, acetone, paints, varnishes, hydraulic fluids, alkalis or concentrated acids. • A fter use, rinse out the spray gun and tips by spraying 4 liters of water (approximately 2 minutes) through the pump, and then empty the spray gun completely (no liquid should be left in the pump). • R emove batteries after charging and unplug the battery charger when not in use.
• Do not open the battery - risk of short circuit. • K eep the battery charger, batteries and gun motor dry at all times to avoid damage or electrical shock. • T o limit all hazards, do not expose the battery to heat, frost or moisture. • W hen damaged, liquid can leak from the battery, avoid contact with the substance. In the case of an accidental contact, clean with water. If the fluid gets into your eyes immediately rinse with water and seek medical assistance.
NAC
• N ever leave the batteries in the spray gun or in the charger.
• Never store the batteries fully discharged (minimum 14V voltage on the battery).
10 10
SCANDIJET PRO
NAC
SCANDIJET PRO
HOW TO CHARGE THE BATTERY Only the included charger fits Lithium-ion batteries ref. 2000 2022-2. It has protection against short circuits, which in case of problems automatically stop charging. 1) Charge the battery by following the directions on the battery chargers label. Always fully charge the battery before the first use. Note: The initial charge of the battery can take longer than an hour. 2) When the charger is on, the green light stays on and blinks when the battery is inserted and then becomes solid when the battery is fully charged. If the red LED lights up – the battery temperature is too high; Unplug the power cord and allow the battery to cool before recharging. If the red LED flashes – indicates that your battery or charger is out of order. 3) To remove the battery press and hold the button on the battery and gently pull the battery off. 4) Insert the battery into the top of the spray gun by gently sliding it in until you hear a «click».
LITHIUM-ION BATTERY The battery is fully charged when voltage reaches 16.7V. The voltage’s battery should never fall below 11V in order to avoid irreversible destruction of the battery. The charging indicators (Orange LED) indicate the percentage of the charging of the battery (press the «On» button on the battery): 3 LED lights: Voltage > 15.5V (Charge > 66%) 2 LED lights: Voltage is between 14.5V and 15.5V (Charge between 33 and 66%) 1 LED light: Voltage is between 14V and 14.5V (Charge between 11 and 33%)
!
NOTE: 1 LED flashes Voltage < 14V (Charge<11%)
! WARNING ! Make sure to remove and dry the battery after each use. Oxidation of the battery lugs will result in loss of the warranty. Avoid storing the battery in fully discharged condition.
11
PROVIDED “QUICK CONNECT” NOZZLE KIT #1: Flood Jet nozzle 1.6 mm It diffuses a flat jet of small width for the localized weeding and the specific treatments: houses, facades, palisades, roofs, frames (Antifoam, water repellent, xylophene, water-based glazing) and to spray most of plant protection products. #2: Flat Fan jet nozzle 1.2 mm Its triangular jet of small thickness is ideal for weed control as close as possible to your plantations.
#3: Concentrated Jet nozzle 1.0 mm It produces a jet that propels your products to a distance of 10 meters. Ideal for the treatment of roofs, trees, destruction of insect nests.
SCANDIJET PRO CONFIGURATIONS Option 1: Depending on the job to be performed, there are several configuration options. Unclip the female quick connector (1) and at the same time, snap on the male quick connector equipped with the nozzle (2).
1
Option 2: Unclip the female quick connector and at the same time, clip the male quick connector of the extension (1). Then unclip the female quick connector at the end of the extension and clip the male quick connector fitted with the nozzle (2). Unscrew the nut of the extension and choose the desired lengh (3).
2
From 55 - 135 cm
NOTE: When using an extension, always use two hands to maintain control of the wand.
NAC
!
12
SCANDIJET PRO
On/Off trigger
handle
NAC
Flow adjustment thumbwheel
SCANDIJET PRO Removable brass strainer/ check valve
Nut for mounting bottle
QUICK CONNECT • QUICK-FIT
The quick connect nozzles and the telescopic wand is mounted in the blink of an eye. Nozzles and telescopic extension can be flitted and removed in the blink of an eye
• CLIP-ON NOZZLES 3 different nozzles suitable for all applications: floors, CHEMICAL SUPPLY OPTIONS walls and roofs
• TELESCOPIC ROD 3 sections (maximum length:1.37 M) = range of more than 10 metres, ideal for reaching the most difficult to access areas
OPTION1 Using a plastic bottle: differentyou jetsmust for use a 2 Liter bottle or To use the spray gun with a3 bottle, different smaller, made for carbonated fluids. jobs: Just attach the small hose to the 1. itSolid nozzle bottom of the gun, then insert intostream the bottle as you screw the bottle 2. Fan nozzle in to the bottom of gun. 3. Deflector nozzle Caution: Do not use bottles over 2 Liters and be careful not to over tighten the bottle.
Option 1 is recommended for small areas. Prepare your specific product in a bottle of soda and insert the brass strainer into the bottle, then • REINFORCED 8.5 M HOSE • GRADUATED FLOWRATE THUMBWHEEL screw the bottle to the spray gun. The bottle holder of the spray gun Increased durability: suitable for use in site conditions Enables the speed of the pump to be adjusted to set is equipped with a ball joint which adapts to the different positions the flowrate when using it. OPTION 2 Using the 9 meter supply hose: Insert the end of the hose with the wire coil inside it on to the bottom of the spray gun as indicated on the drawing. Next, insert the filter on the opposite end of the hose and place it into your container.
➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢
position position position position position position position position
1: 2: 3: 4: 5: 6: 7: 8:
0.85 l/mn 0.97 l/mn 1.10 l/mn 1.22 l/mn 1.34 l/mn 1.46 l/mn 1.58 l/mn 1.70 l/mn
Note: When working at heights, make sure you start the spray gun on ground level first to prime the pump. Option 2 is recommended for large areas. Insert the 9 meter hose with the brass suction strainer (filter) into a container (watering can, can, tank…) and connect the other end of the hose on the brass strainer of the spray gun.
!
WARNING: Before starting work and before starting the device, be sure to set the flow rate of the spray gun on position 1 (graduated wheel) and then, increasing it gradually. Do not put the spray gun down when the bottle is full (Option1). Do not submerge the spray gun with liquids.
13
SPECIFIC AFTER USE RULES After each use:
! A fter use, rinse out the spray gun and tips by spraying 4 liters of water through the pump, and then empty the spray gun completely (no liquid should be left in the pump).
! T he battery must be removed after each use and wiped. The oxidation of the battery lugs will result in loss of the warranty.
! Remove batteries after charging and unplug the battery charger when not in use. ! It is recommended to disassemble and clean the nozzles and brass filter after use of thick products. ! The spray gun and accessories must be wiped clean before storing in the box. NOTE: If used for applying sealers, deck stains and other coating products, always rinse the gun using a Sodium Hydroxide based deck stain stripping product, and then rinse with fresh water.
TROUBLESHOOTING & TIPS
MAINTENANCE OF THE FILTER
1. Starting the device: Check the flow rate which must be in position 1 (graduated wheel).
Disassemble and clean the brass filter regularly.
2. Gun does not pull chemicals through the hose: Usually this is caused by debris that have clogged the pump. First try to flush out the spray gun by attaching the hose to your gun, then insert the other end of your hose into a garden hose, or sink faucet, to gently “PUSH” water to the pump, while running the spray gun for a few minutes. Usually this will flush out any debris and the gun will start working normally again.
UP
Mounting direction
3. Lack of power: Check out if the battery is fully charged. Check out if nozzle or filter are not blocked.
Filter
4. Discontinuous jet: Check out if nozzle or filter are not blocked. Check out if the strainer filter is not blocked. 5. Leakage of liquid: Check seals and the tightening of the nozzle.
DOWN
NAC
6. Rigidity of the suction pipe: If the temperature is too cold, aspirate hot water to restore its flexibility.
14
SCANDIJET PRO
NAC
SCANDIJET PRO
FLOWRATE The graduated knob of the ScandiJet Pro spray gun makes it possible to adjust the flow rate of the pump. Average flow rates are indicated below:
USE Position 1 : 0.85 l/min
Position 5 : 1.34 l/min
Position : 0.97assist l/minin your spraying Position 6 : 1.46 l/min ® Jet2 will or cleaning jobs on all types of surfaces: floors, walls, facades, roofs, etc. Guard Position 3 : 1.10 l/min Position 7 : 1.58 l/min • BUILDING: spraying of all protective, water-repellent, defoaming products, etc. Position 4 : 1.22 l/min Position 8 : 1.70 l/min • GREEN SPACES: spraying phytosanitary treatment products, watering, etc.
• •
LEISURE, POOL, CAMPING : cleaning tiling, changing rooms, cars, caravans, mobile homes, etc. ALL TYPES OF USE: cleaning and disinfecting rooms, kitchens, equipment, tarpaulins, tanks, etc.
SPECIFICATIONS •PRODUCT IDEAL FOR APPLYING GUARD INDUSTRIE PRODUCTS: ProtectGuard®, ProtectGuard® HD, Guard ® Wash®, Guard Remover Eco Efflorescences Guard Anti-M® 24,1etc. Model: SCANDIJET PRO spray gun & cement, Charger Time: to 2 hour(s) Pump Material: Self Priming Pump ® JET: ULTRA-VERSATILE SPRAY GUN GUARD
Input Voltage:
90 to 230V – 50/60Hz
Valve:
Viton
Output Voltage:
16.8V – 1.3A
Max Pressure:
7 bar
Liquid Flow:
0.85 to 1.70 L/min
Battery Security Type:
Over Discharge
Number of Nozzles:
3
Battery Type:
Lithium-ion 14.4V-2.2Ah
Packing Size:
260x90x60 cm
Working Hour:
2 to 5 hours
Standard:
CE - ETL
CE-STANDARDS: The “SCANDIJET PRO” spray gun complies with the Low Voltage Directive 2006/95 / EC, Electromagnetic Compatibility Directives 2004/108 / EC - EN55014-1 / A1: 2009 - EN55014-2 / A2: 2008 - EN61000-3-2 / A2 : 2009 - EN61000-3-3: 2008. The product is marked with the CE symbol according to the above guidelines.
15
AGRICULTURE
JANITOR / CARETAKER
COMMERCIAL KITCHENS
ScandiJet Pro is successfully used by many different customers
FACADE CLEANING
DISINFECTION / ODOUR CONTROL
MOULD
ALGAE REMOVAL
ANIMAL CARE
GARDENING
NAC Europe Ellegårdvej 18 DK-6400 Sønderborg Tel. +45 74 42 62 92 Fax +45 74 42 47 86 info@nac-europe.com www.nac-europe.com
CAR CARE
WOOD RESTORATION