windows doors okna in and vrata
NAGODE www.nagode.si Top quality manufacturing from Slovenia
okna in vrata
NAGODE www.nagode.si okna in vrata
NAGODE www.nagode.si
CATALOGUE OF
WOODEN WINDOWS AND DOORS www.nagode.si 1
Windows and doors Nagode
WINDOWS • new buildings • adaptations • renovations of heritage-listed construction works
DOORS • entrance doors • garage doors – double and lifting doors
Slovenian product competitiveness energy savings reliability quality
Windows and doors for your home 2
WOODEN WINDOWS
3
NAGODE classic
68
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
The thickness of the window frame is 68mm, the profiles are glued from three layers of unjointed wood, which provides optimum strength and stability of the product.
[W/m2K]
4/16/4 Ug = 1,1
4/16/4 Ug = 1,0
VIEW FROM THE INSIDE HARDWARE The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
GLASS It is possible to install double or triple panes of glass with thermal insulation Ug from 2.9 to 0.80 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
GLAZING BARS
Uw
[W/mK]
[W/m2K]
ALU
1,31
TGI
1,24
Super Spacer
1,21
ALU
1,25
TGI
1,18
Super Spacer
1,15
ALU
1,18
TGI
1,11
Super Spacer
1,08
ROUNDED EDGES Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
WOOD The window profile is 68 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
We perform installations of concealed glazing bars.
It protects the most exposed parts of the window from the weather. Designed with a thermal element.
SEAL
PROTECTION OF THE V-JOINTS
Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.
4
4/12/4 Kr Ug = 0,9
Spacer
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture. VIEW FROM THE OUTSIDE
68 NAGODE rustic 68 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
[W/m2K]
4/16/4 Ug = 1,1
4/16/4 Ug = 1,0
4/12/4 Kr Ug = 0,9
Spacer
Uw
[W/mK]
[W/m2K]
ALU
1,31
TGI
1,24
Super Spacer
1,21
ALU
1,25
TGI
1,18
Super Spacer
1,15
ALU
1,18
TGI
1,11
Super Spacer
1,08
The wooden window with its rounded edges in a special style is a product which can be adapted to the internal and external architecture due to its unique design. Rustic is a window which has an emphasized baroque style profile instead of the rounded edges. It is suitable for protected buildings. VIEW FROM THE INSIDE
ROUNDED EDGES
HARDWARE
The stylish rounded edges of the frame and sash provide a rustic look.
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the microventilation element.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install double panes of glass with thermal insulation Ug from 2.9 to 0,90 W/m2K.
GLASS SPACERS SYou can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD The window profile is 68mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE The window is installed as standard without a sash drip profile. It can be installed upon request.
WOODEN DRIP EDGE
GLAZING BARS
The wooden drip bar emphasizes the rustic look of the window. It is attached to the aluminium drip profile with a thermal element.
We also provide installations of stylish concealed glazing bars.
PROTECTION OF THE V-JOINTS
SEAL
Before applying a thick layer end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.
VIEW FROM THE OUTSIDE
5
NAGODE superior
78
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
Spacer
[W/m2K]
The window is manufactured from a 78mm thick profile, made from four layers of longitudinally unjointed wood and glued together. It is distinguished by its good thermal insulation and structural stability.
4/12/4/12/4 Ug = 0,70
4/16/4/16/4 Ug = 0,60
4/18/4/18/4 Ug = 0,50
VIEW FROM THE INSIDE HARDWARE
[W/m2K]
ALU
1,00
TGI
0,93
Super Spacer
0,90
ALU
0,93
TGI
0,86
Super Spacer
0,83
ALU
0,86
TGI
0,80
Super Spacer
0,76
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD The window profile is 78 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
GLAZING BARS
It protects the most exposed parts of the window from the weather.
We perform installations of concealed glazing bars.
6
Uw
[W/mK]
SEAL
PROTECTION OF THE V-JOINTS
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
VIEW FROM THE OUTSIDE
90 NAGODE energy saving 90 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
[W/m2K]
4/12/4/12/4 Ug = 0,70
4/16/4/16/4 Ug = 0,60
4/18/4/18/4 Ug = 0,50
Spacer
Uw
[W/mK]
[W/m2K]
ALU
0,97
TGI
0,90
Super Spacer
0,87
ALU
0,90
TGI
0,83
Super Spacer
0,80
ALU
0,83
TGI
0,76
Super Spacer
0,73
The window has exceptional properties – it is energy saving and its 90mm thick window frame enables excellent structural stability and high thermal insulation.
VIEW FROM THE INSIDE HARDWARE
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD The window profile is 90 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
GLAZING BARS
It protects the most exposed parts of the window from the weather.
We perform installations of concealed glazing bars.
PROTECTION OF THE V-JOINTS
SEAL
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
VIEW FROM THE OUTSIDE
7
NAGODE energy saving
102
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
Spacer
[W/m2K]
Energy-saving window – the 102mm thick window frame provides excellent structural stability and high thermal insulation.
4/12/4/12/4 Ug = 0,70
4/16/4/16/4 Ug = 0,60
4/18/4/18/4 Ug = 0,50
VIEW FROM THE INSIDE HARDWARE
[W/m2K]
ALU
0,94
TGI
0,87
Super Spacer
0,84
ALU
0,88
TGI
0,81
Super Spacer
0,78
ALU
0,81
TGI
0,74
Super Spacer
0,71
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD The window profile is 102 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
GLAZING BARS
It protects the most exposed parts of the window from the weather.
We perform installations of concealed glazing bars.
8
Uw
[W/mK]
SEAL
PROTECTION OF THE V-JOINTS
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
VIEW FROM THE OUTSIDE
110 NAGODE energy saving 110 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass
[W/m2K]
4/12/4/12/4 Ug = 0,70
4/16/4/16/4 Ug = 0,60
4/18/4/18/4 Ug = 0,50
Spacer
Uw
[W/mK]
[W/m2K]
ALU
0,93
TGI
0,86
Super Spacer
0,83
ALU
0,87
TGI
0,80
Super Spacer
0,77
ALU
0,80
TGI
0,73
Super Spacer
0,70
The window with the 110mm thick window frame is suitable for installation into low-energy facilities, since it boasts structural stability and insulation.
VIEW FROM THE INSIDE HARDWARE
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD The window profile is 110 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
GLAZING BARS
It protects the most exposed parts of the window from the weather.
We perform installations of concealed glazing bars.
PROTECTION OF THE V-JOINTS
SEAL
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
VIEW FROM THE OUTSIDE
9
thermally modified wood NAGODE pro The window is made from termally modified wood. The procedure is unique and high tech and provides precise control of the reactions that take place in the wood during the modification process. The technology enables time effective modification of most types of coniferous and deciduous wood according to predefined programmes. Due to innovative solutions the smell of modified wood (the smell of charcoal) is significantly less pronounced, and all the resin is removed from the wood. Besides solid wood, we can also modify the veneer. Changes in the structure of the wood macromolecules in the process of termal modification are a result of spontaneous thermochemical reactions which take place during the heating of the wood at temperatures between 170 °C in 230 °C C without the addition of other substances or chemical reagents. This way the “operation” (expansion and contraction) of the wood is reduced by 50% and the durability is enhanced. The resistance of low-resistance coniferous wood improves to class 2 (standard SIST EN 350-2), where naturally resistant oak and similar wood can be found. Termally modified wood can be used outdoors without additional protection.
CHARACTERISTICS OF HEAT-TREATED WOOD:
(compared to natural, untreated wood)
• improved dimensional stability of the wood (up to 50% reduced expansion and contraction of the wood) • improved natural resistance to pests • reduced balanced moisture content of the wood • uniform colour throughout the entire cross section • 100 % people and environment friendly
TESTED AT THE BIOTECHNICAL FACULTY, UNIVERSITY OF LJUBLJANA
• exotic looking wood • longer lifespan even when using outdoors
10
SPRUCE
LARCH
OAK
WOODEN WINDOW 68 NAGODE pro 68 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Uw
Glass
Spacer [W/mK]
[W/m2K]
Profil 68 4/16/4 Ug = 1,0
ALU
1,19
TGI
1,12
Profil 78 4/12/4/12/4 Ug = 0,70
ALU
0,95
TGI
0,88
Profil 90 4/12/4/12/4 Ug = 0,70
ALU
0,92
TGI
0,85
Profil 102 4/16/4/16/4 Ug = 0,60
ALU
0,82
TGI
0,75
Profil 110 4/18/4/18/4 Ug = 0,50
ALU
0,74
TGI
0,67
[W/m2K]
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
NAGODE pro is made of thermally
modified wood. It is completely natural window that does not require any additional protection.
VIEW FROM THE INSIDE
IMPLEMENTATION IN ALL THICKNESSES:
ROUNDED EDGES
68
78
90
102
110
HARDWARE
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings.
GLASS It is possible to install double or triple panes of glass with thermal insulation Ug from 2.9 to 0.80 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD
The window profile is 68 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILE
GLAZING BARS
It protects the most exposed parts of the window from the weather. Designed with a thermal element.
We perform installations of concealed glazing bars.
PROTECTION OF THE V-JOINTS
SEAL
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.
VIEW FROM THE OUTSIDE
11
WOODEN PASSIVE WINDOW
NAGODE pasivtherm NAGODE pasivtherm 90 is made of glued window profiles with integrated thermal insulation. We offer a modern energy-saving wooden window. The PASIVTHERM system window frame boasts a thermal transmittance factor, which is enhanced by 40% compared to solid glued window frames. Proper allocation of solid wood areas and areas with insulation in the window profile of the PASIVTHERM window provides high strength, stability and torsional stiffness of the window.
90
ADVANTAGES OF PASIVTHERM WINDOWS: • The thinnest passive wooden window on the market • It is also possible to implement the aluminium/wood coating: the PROTECT 4 or PROTECT 5 programme • The thermal transmittance of the frame is enhanced by 40% • Solid angular joint • Ecological insulating fillers are not visible • Hard polyurethane foam does not contain CFCs and HCFCs • The insulation contains a polyol component, which is produced from rapeseed oil. • Environmentally-friendly and energy-saving • Contributes to a healthier living environment
HARDWARE The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Uf=0,78 W/m2K
ROUNDED EDGES Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
GLASS It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
WOOD
GLAZING
The window profile is 90mm thick, made from four layers of wood glued together and filled with rigid polyurethane foam, which increases the thermal conductivity of the frame by 40%. Manufactured exclusively from longitudinally unjointed wood.
The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
GLAZING BARS We perform installations of concealed glazing bars.
FRAMEWORK DRIP PROFILE
SEAL
It protects the most exposed parts of the window from the weather.
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
PROTECTION OF THE V-JOINTS
POLYURETHANE FOAM 12
Precision manufacturing provides excellent thermal insulation of the profile.
VIEW FROM THE OUTSIDE
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
WOODEN PASSIVE WINDOW
NAGODE hibridtherm
110
Nagode hibridterm 110 has a standard three-layer glazing with a thermal transmittance of Ug=0,70 W/m2K and a Super Spacer between the sheets of glass (j=0,027 W/mK), which further enhances the thermal characteristics of the glass. We can optionally use glazing with lower heat transmittance, which enhances the thermal characteristics. An innovative AEROGEL SPACELOFT®, nanotechnological insulating material is integrated between the layers, which improves the thermal transmittance.
Uf=0,76 W/m2K
CERTIFICATE FOR PASSIVE WINDOWS The criteria for the thermal transmittance of doors and windows for the installation in passive houses were defined by the Passive House Institute in Darmstadt; Germany. The institute is the leading force for defining standards and promoting passive construction. We are proud to have acquired this certificate, which proves the quality of our furniture. To mark a window as passive, the frame and the glass must meet certain conditions, namely the frame must have Uf ≤ 0,80 W/m2K and the glass Ug = 0,70 W/m2K. If both conditions are met, the total value of the window must be Uw ≤ 0,80 W/m2K. Taking all this into account, it is also important that the integrated window meets the criterion of the installation Uw ≤ 0,85 W/m2K. Calculations always consider the standardized sample dimension of the window, 123×148cm, and the thermal transmittance of the glass Ug = 0,70W/m2K.
MAIN CHARACTERISTICS OF THE AEROGEL SPACELOFT®: • The thermal conductivity is only 0.013 W/m2K, which is an up to eight times better insulation value for the same thickness compared to standard materials. • Excellent fire resistance and resistance against the spread of flames and smoke emissions. • Permanently hydrophobic material at high temperatures. • Excellent sound insulation at low frequencies. • Resistant to compression, shockabsorbing. The contraction of the material is less than 1% after 20 years. • No health hazards; does not contain carcinogens and allergenic substances. • Environmentally friendly material, which does not chemically compromise the environment. Restricts infrared radiation. It can be disposed of at landfills and is not radioactive.
13
alu-clad/WOOD WINDOW
NAGODE protect 4
90 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represents a merger of the finest properties. Wood brings warmth to the interior rooms, while the outside is protected against the weather.
68 VIEW FROM THE OUTSIDE
IMPLEMENTATION IN ALL THICKNESSES:
68
78
90
102
110
HARDWARE
[W/mK]
[W/m2K]
Profil 68 4/16/4 Ug = 1,0
ALU
1,25
TGI
1,18
Profil 78 4/12/4/12/4 Ug = 0,70
ALU
1,00
TGI
0,93
Profil 90 4/12/4/12/4 Ug = 0,70
ALU
0,97
TGI
0,90
Profil 102 4/16/4/16/4 Ug = 0,60
ALU
0,88
TGI
0,81
Profil 110 4/18/4/18/4 Ug = 0,50
ALU
0,80
TGI
0,73
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
GLASS It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
PROTECT 4 ALU MASK Completely protects the window from the weather. Wide variety of colour shades and wood decors.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
CORNER JOINTS The corner joints are welded or riveted. Due to the technical properties of aluminium, riveted corner joints are required for larger elements.
PROTECTION OF THE V-JOINTS
GLAZING BARS
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
We perform installations of concealed glazing bars.
SEAL
14
Spacer
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
Uw
Glass
[W/m2K]
VIEW FROM THE OUTSIDE
alu-clad/WOOD WINDOW 78 NAGODE protect 5 78 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Uw
Glass
Spacer [W/mK]
[W/m2K]
Profil 68 4/16/4 Ug = 1,0
ALU
1,25
TGI
1,18
Profil 78 4/12/4/12/4 Ug = 0,70
ALU
1,00
TGI
0,93
Profil 90 4/12/4/12/4 Ug = 0,70
ALU
0,97
TGI
0,90
Profil 102 4/16/4/16/4 Ug = 0,60
ALU
0,88
TGI
0,81
[W/m2K]
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represents a merger of the finest properties. Wood brings warmth to the interior rooms, while the outside is protected against the weather. Innovative solution without the internal glazing bar – for an elegant look. VIEW FROM THE INSIDE
IMPLEMENTATION IN THICKNESSES:
68
78
90
102
110
HARDWARE
ROUNDED EDGES
The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLAZING The level of integrated glass is aligned with the wooden part of the sash. The exterior aluminium mask and the seal rest against the glass. The outside is additionally sealed with silicone.
PROTECT 5 ALU MASK Completely protects the window from the weather. Wide variety of colour shades and wood decors.
GLASS SPACERS
CORNER JOINTS
You can choose between aluminium or PVC implementation.
The corner joints are welded or riveted. Due to the technical properties of aluminium, riveted corner joints are required for larger elements.
GLAZING BARS An innovative system without the internal glazing bar.
PROTECTION OF THE V-JOINTS
SEAL
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
Three permanent elastic seals are installed in the windows as standard. It is possible to add a fourth seal.
VIEW FROM THE OUTSIDE
15
alu-clad/WOOD WINDOW 78 NAGODE elegance protect 6 78 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represent a union of the best characteristics. Wood brings warmth to indoor spaces, while the outside is protected from the weather. An elegant solution with a concealed framework and straight lines. VIEW FROM THE INSIDE
IMPLEMENTATION IN THICKNESSES:
VIEW FROM THE OUTSIDE
78 ROUNDED EDGES
HARDWARE
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
The quality German GU hardware enables all possible ways of opening. Concealed hardware serially. Standard installation of the microventilation element.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose twocoloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug 0.50 W/m2K.
PROTECT 6 ALU MASK
GLAZING
Completely protects the window from the weather. Wide variety of colour shades and wood decors. The line of the frame and the casement form a straight line on the outside.
The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.
CORNER JOINTS The corner joints are welded or riveted. Due to the technical properties of aluminium, riveted corner joints are required for larger elements.
GLAZING BARS We perform installations of concealed glazing bars.
SEAL PROTECTION OF THE V-JOINTS
The window is equipped as standard with two permanent elastic Q-Lon seals. It is possible to add a third seal.
Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
additional frameWORK
16
There is a straight line on the inside. Not only elegance, the thermal insulation of the frame is also increased.
VIEW FROM THE OUTSIDE
WOOD WINDOW 78 NAGODE elegance 78 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES
Uw
Glass
Spacer [W/mK]
[W/m2K]
Profil 68 4/16/4 Ug = 1,0
ALU
1,25
TGI
1,18
Profil 78 4/12/4/12/4 Ug = 0,70
ALU
1,00
TGI
0,93
Profil 90 4/12/4/12/4 Ug = 0,70
ALU
0,97
TGI
0,90
Profil 102 4/16/4/16/4 Ug = 0,60
ALU
0,88
TGI
0,81
Profil 110 4/18/4/18/4 Ug = 0,50
ALU
0,80
VIEW FROM THE INSIDE
TGI
0,73
IMPLEMENTATION IN THICKNESSES:
[W/m2K]
The elegant window with straight lines and concealed framework complements the modern appearance of the rooms. Cleaning is easy due to the straight lines, while there is also a larger space between the window and the jamb. A window, where modernity and elegance meet.
ROUNDED EDGES
68
78
90
102
110
HARDWARE
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
The quality German GU hardware enables all possible ways of opening. Concealed hardware serially. Standard installation of the microventilation element.
SURFACE TREATMENT
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
It is possible to install triple panes of glass with the thermal insulation Ug from 1,1 to 0,50 W/m2K.
GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application
WOOD The window profile up to 110 mm thickness. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.
GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
FRAMEWORK DRIP PROFILE It protects the most exposed parts of the window from the weather.
SEAL The window is equipped as standard with two permanent elastic Q-Lon seals. It is possible to add a third seal.
PROTECTION OF THE V-JOINTS Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
additional frameWORK
VIEW FROM THE OUTSIDE
There is a straight line on the inside. Not only elegance, the thermal insulation of the frame is also increased.
17
GLASS/WOOD WINDOW
DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES A Modern window, which only has visible glass on the outside of the casement and no wood, which simplifies maintenance. An innovative solution without the internal glazing bar – for an elegant look. The NAGODE trend system can be upgraded with aluminium clad on the NAGODE protect 5 frames. IMPLEMENTATION IN THICKNESSES:
68
78
90
102
110
ROUNDED EDGES
HARDWARE The quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
GLASS
Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.
SURFACE TREATMENT
It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
GLASS SPACERS
WOOD
Are optionally available in ALU or PVC material.
The window profile is 78mm thick and made from four layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
GLAZING The silicone is only visible on the inner side of the window.
ENAMELLED GLASS EDGE
GLAZING BARS
The special version of the external 6mm thick tempered and enamelled glass provides a modern window. The standard enamelling colours are black, anthracite and white.
An innovative system without the internal glazing bar.
SEAL The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
PROTECTION OF THE V-JOINTS Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
GLUED GLASS
18
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
78 NAGODE trend 78
The built-in glass is glued to the framework, which increases the structural strength of the sash.
FRAMEWORK DRIP PROFILE VIEW FROM THE OUTSIDE
It protects the most exposed parts of the window from the weather.
PANORAMIC WINDOWS
19
LIFT-SLIDE WINDOWS DESCRIPTION OF BENEFITS
termo
The lift and slide windows enables unlimited architectural solutions considering the width and height of the implementation. It is distinguished by a unique solution with a low threshold and opens easily. TECHNICAL SPECIFICATIONS
timbe
GU HS 934 • sash weight up to 300 kg • sash width 700-3300 mm • sash height 1851-3250 mm
Possible implementation with aluminium clad NAGODE protect 4 or NAGODE protect 5.
rstep
68
68
step
78
90
110
OPENING IMPLEMENTATIONS
78
A C D E F G1
symmetrical
G1
a symmetrical
H K L 20
OPENING IMPLEMENTATIONS
DESCRIPTION OF BENEFITS The fold and slide windows has a classic high wooden threshold or a low sunken aluminium threshold. Due to the way of the opening it enables the maximum width of the gateway.
TECHNICAL SPECIFICATIONS ROTO patio 6080 • sash weight up to 80 kg • sash width 450-900 mm • sash height 800-2400 mm low aluminium threshold – passage 18 mm
high wooden threshold – passage 97 mm
FOLD-SLIDE WINDOWS
21
Parallel-slide and tilt windows Description of benefits Parallel-slide and tilt windows can feature a high wooden or low aluminium threshold as well as provides ventilation in the hung version of the sash. In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.
Technical specifications traditional opening
Technical specifications automatic opening
GU PSK 966/150oZ
GU PSK 966/150mZ
• sash weight up to 130 kg • sash width 640-1600 mm • sash height 700-2350 mm
GU PSK 966/100oZ bb - Alu-threshold • sash weight up to 100 kg • sash width 640-1600 mm • sash height 700-2350 mm
GU PSK 966/200mZ • sash weight up to 200 kg • sash width 720-2000 mm • sash height 820-2370 mm
• sash weight up to 150 kg • sash width 720-2000 mm • sash height 820-2370 mm
OPENING IMPLEMENTATIONS
A A Parallel-slide and turn hardware GU-966/100 oZ bb. A practical solution for a living comfort without any obstructions on the floor and a simple use: the floor threshold height is only 20mm.
C C G G K
22
Parallel-slide windows Description of benefits The parallel-slide windows features a high wooden threshold. It allows for a simple opening since no turn feature is installed. In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.
Technical specifications traditional opening GU PS 966/200oZ - no turn feature • sash weight up to 200 kg • sash width 640-2000 mm • sash height 730-2350 mm
OPENING IMPLEMENTATIONS
A A C C D G G K 23
SURFACE PROTECTION WE PROTECT THE SURFACE OF THE DOORS AND WINDOWS IN 4 STEPS: Application 4 – FINAL THICK LAYER OF COATING, optionally DURAFLEX The water-based transparent coating, which has a 250 microns dry application, has exceptional elastic and resistance features for protection against weather conditions and mechanical stresses. Application 3 – INTERMEDIATE This effectively closes the pores in the wood, forms a bonding layer and regulates the moisture in the wood. After treatment the surface is closed and uniformly even. Application 2 – PRIMER Effectively works against blue stain fungus in the wood. It is distinguished by the high capacity of equalizing the colour shade of the wood surfaces (equalisation) at a simultaneous high purity (transparency) of the colour tone. Application 1 – IMPREGNATION A colourless impregnation, which works against wood-decay fungi. It is distinguished by the ability of deep penetration into the structure of the wood and the strengthening of the structure. It protects wood against moisture.
DURAFLEX TECHNOLOGY: EXCELLENT JOINING OF WOOD AND COATING The Duraflex system can help us achieve optimum durability. Due to the permanent elastic layer the product – especially in case of temperature Î changes – it optimally adjusts to the surface. The innovative agent for protection against light enables high and long-lasting protection of the coating against UV radiation. Excellent permeable properties of the layer provide exceptionally good retention of moisture in the wood. Due to its properties, the Duraflex coating system provides a high resistance against the weather.
24
Outer shades – SHUTTERS KEEP YOUR HOUSE BEAUTIFUL Shutters give a specific character to the house. The implementation is possible with different opening methods – the shutters can have one, two, three or four wings and can be switched. moving louvres 5-level opening of the shutters with moving louvres
We use two versions of hardware – the simple Jadro 200 hardware in black or grey and the elegant Fentro hardware in black or white.
fixed louvres
full on two fillers
full on one filler
Okoumé-laminated panel
25
ENTRANCE DOORS
26
DOOR MODELS
MV 010
MV 011
MV 012
MV 013
MV 014
MV 020
MV 021
MV 022
MV 030
MV 040
MV 050
MV 055
MV 090
MV 100
MV 110
MV 120
MV 150
MV 160
MV 180
MV 211
27
DOOR MODELS
28
MV 210
MV 200
MV 300
MV 350
MV 380
FV 411
FV 412
FV 413
FV 414
FV 420
FV 421
FV 450
FV 455
FV 500
FV 501
FV 502
FV 503
FV 504
FV 505
FV 540
DOOR MODELS
FV 541
FV 542
FV 545
FV 560
FV 580
FV 590
FV 600
FV 610
FV 620
FV 625
FV 630
FV 631
FV 640
FV 680
FV 690
MV 100sn
MV100s
FV 650s
FV 500n
29
REFERENCES
30
REFERENCES
31
REFERENCES
32
REFERENCES
33
REFERENCES
34
REFERENCES
35
NAGODE www.nagode.si Tržaška cesta 64 1370 Logatec Slovenia
okna in vrata
NAGODE www.nagode.si
Production: agencija@citrus.si
windows doors okna inand vrata
NAGODE www.nagode.si
Advice and orders:
+ 386 1 75 09 676
Preparation of pro forma invoices: + 386 1 32 00 676 Technology: 36
+ 386 1 75 09 677
11/15EN
You are kindly invited our vrata showroom. oknato in
info@nagode.si