eaton_aeroquip_CATALOGO by Julian Castiblanco

SPECIALTY & TRUCK HOSE

Hose Index Alphabetical Index A/C and Refrigeration Hose 17 AQP Hose 13-14 Hose 20-57

Hydraulic AQP

34-57 35, 36, 39, 40, 41, 45, 48, 49, 50, 51 AQP/HI-IMPULSE 39, 40, 48, 49 AQP/Hi-Pac 41 BRUISER™ 43, 44, 46, 53, 54, 56 Double wire braid 42-49

DESCRIPTION

PAGES

Four spiral wire 49-53 Four or six spiral wire 54-56 HI-IMPULSE 38-40, 47-49 Hi-Pac 41 MatchMate BLUE 39, 48 MatchMate ICE 45 MatchMate Plus 39, 47, 48, 51 Single wire braid 38-42 Textile braid 21, 22, 32-37 Wire inserted suction 34, 35

DESCRIPTION

PAGES

Special application 20-34 Airbrake 21-23 AQP 23-25, 27, 33 Convoluted PTFE 31, 32 Engine and airbrake 23 EPDM 40, 49 Fuel and oil 23-27 Jack Hose 57 LPG 27, 28

DESCRIPTION

PAGES

Power steering 41 Railroad airbrake 22 Silicone rubber (coolant) 20 Silicone rubber (heater) 20 SOCKETLESS 32-34 PTFE 28-32 Textile braid low pressure 32-34, 35-37 How to order PTFE Hose Thermoplastic Hose

LOW & MEDIUM PRESSURE HOSE

PAGES

12 18-19 15-16

HIGH PRESSURE HOSE

DESCRIPTION

PART #

PG.

32 37 37 25 35 38 45 47 28 30

CR170 FC194 FC195 FC234 FC252 FC254 FC273 FC273B FC300 FC310

28 40 49 25 20 53 54 54 27 41

Eaton’s Aeroquip Hose and Fitting Assembly Product Warning Flexible hose lines offer many advantages over rigid tubing including routing ease, vibration absorption, sound deafening and the ability to accommodate movement of connected components. However, hose lines require caution in use not only to provide long service, but also to guard against potentially dangerous failure. Important The user should carefully observe the precautions listed in this catalog, including the recommendations on the selection of hose and fittings on the relevant pages, and the pages on fluid compatibility. In addition, care should be taken not to exceed the minimum bend radius listed for each hose size and type in the hose section.

PART #

FC321 FC323 FC324 FC325 FC332 FC350 FC352 FC355 FC363 FC364

PG.

PART #

PG.

27 50 50 51 33 23 20 23 31 31

FC465 FC466 FC469 FC498 FC510 FC563 FC579 FC598 FC606 FC606B

29 35 30 36 41 32 57 36 56 56

Maximum operating pressure should not exceed pressures listed in the hose data. Instructions for assembling fittings to different hose should be followed carefully to ensure the performance of the completed assembly. WARNING Eaton fitting tolerances are engineered to match Eaton’s Aeroquip hose tolerances. The use of Eaton fittings on hose supplied by other manufacturers and/or the use of Eaton’s Aeroquip hose with fittings supplied by other manufactures may result in the production of unreliable and unsafe hose assemblies and is neither recommended nor authorized by Eaton Corporation or any of its affiliates or subsidiaries.

PART #

FC611 FC619 FC629 FC636 FC639 FC647 FC650 FC659 FC693 FC699

PG.

PART #

PG.

PART #

PG.

40 34 21 49 42 33 24 52 46 24

FC735 FC736 FC829 FC839B FC849 FC849B FC854 GH120 GH194 GH195

46 53 22 43 43 44 53 45 39 48

GH466 GH493 GH506 GH663 GH681 GH781 GH793 S-TW

55 51 55 39 42 47 48 29

WARNING Application considerations must be observed in selecting appropriate components for the application of these products contained herein. The failure to follow the recommendations set forth in this catalog may result in an unstable application which may result in serious personal injury or property damage. EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTIAL AND CONTINGENT DAMAGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRO-

DUCED FROM GENUINE AEROQUIP HOSE FITTINGS, HOSE AND AEROQUIP APPROVED EQUIPMENT, AND IN CONFORMANCE WITH EATON’S AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY.

ADAPTERS & TUBE FITTINGS

2575 2580 2583 2651 2661 2681 2766 2781 2807 2808

PG.

ACCESSORIES & ASSEMBLY INSTRUCTIONS

26 26 26 22 22 21 21 34 34 21

PART #

Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, serious injury or death.

HOSE ASSEMBLY EQUIPMENT

302A 303 1503 1531 1531A 2550 2554 2556 2565 2570

PG.

Routing If the user follows the recommendations on hose line routing and installation as provide herein, improved safety and longer service life of any hose installation will result.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

PART #

HOSE FITTINGS

Part Number Index

How to Order SPECIALTY & TRUCK HOSE LOW & MEDIUM PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS ADAPTERS & TUBE FITTINGS

Accurate processing and prompt delivery of your order depends on easy identification of your requirements. Please order Aeroquip brand parts using correct part numbers as described in this catalog. Inquiries and orders should be directed to your Aeroquip Distributor or:

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Eaton Corporation 14615 Lone Oak Road Eden Prairie, MN 55344 USA 952/937-9800; Fax: 952/974-7722 www.hydraulics.eaton.com Part numbers and dash sizes

HOSE ASSEMBLY EQUIPMENT

Dash size designates the nominal size in 16ths of an inch. This number immediately follows the part number and is separated from it with a dash. Dimensions

APPENDICIES

Dimensions given in this catalog for Aeroquip products are approximate and should be used for reference only. Exact dimensional information for a given product is subject to change and varying tolerances; contact Eaton directly for full current information.

Cut length hose WARNING Hose assemblies

Cut lengths of hose should be ordered as shown below by specifying lengths in inches.

Eaton manufactures the terminal ends of our hose fittings to the appropriate requirements established by the SAE. Therefore, the performance ratings of these hose fittings meet the SAE requirements. It is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating. When ordering hose assemblies, please keep the connecting end performance rating in mind since this may affect overall hose assembly performance.

For numeric part numbers:

Hose assembly components (hose and fittings) are easily assembled in the field. However, factory assembled reusable and crimped hose assemblies are available.

Quantity (in feet)

For complete information, contact Eaton.

2651- 10- 00484

Hose type Hose size (in 16ths of an inch) Cut length (in inches) last digit is in 1/8ths of an inch 00484 = 481/2 inches For alpha-numeric part numbers:

FC300- 08- 00484

Hose type Hose dash size Cut length (in inches) last digit is in 1/8ths of an inch 00484 = 481/2 inches Bulk hose Bulk hose should be ordered by specifying length in feet as shown below. Complete number

500 ft.- 2651- 10

Hose type Hose size (in 16ths of an inch) Note: Length tolerance for hose, assemblies and sleeves is: Up to and including 12 inches: ±1/8" Above 12 inches to and including 18 inches: ±3/16" Above 18 inches to and including 36 inches: ±1/4" Above 36 inches: ±1% of length

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

AQP Hose

FC300 AQP Hose

The superior high-temperature, abrasion-resistant hose. Features extensive fluid compatibility.

See page 27.

Combines superior hightemperature resistance and extensive fluid compatibility plus operating pressures up to 40% greater than SAE100R1 hose.

Aeroquip brand HI-IMPULSE hose construction is a patented process. Patent number 3,725,167.

Combines superior high temperature resistance and extensive fluid compatibility plus operating pressures up to 40% greater than SAE100R2 hose.

Aeroquip brand HI-IMPULSE hose construction is a patented process. Patent number 3,725,167.

Combines the flexibility and economy of Hi-Pac hose with the temperature and fluid compatibility of AQP hose.

Aeroquip brand Hi-Pac hose construction is patented. Patent number 3,463,197.

Uniform Pressure Spiral Wire Hose 210,0 BAR [3000 psi]

The features of AQP construction and spiral wire reinforcement are combined in this quality hose style.

LOW & MEDIUM PRESSURE HOSE

Refer to AQP Catalog A-HOAQ-MC001-E1 for more information on AQP hose.

FC195 AQP/HI-IMPULSE Hose

Exceeds SAE100R2A, EN853 2ST, ISO1436-1 TYPE 2ST

FC510 AQP/Hi-Pac Hose

See page 40. HOSE FITTINGS

Exceeds SAE100R1A, EN853 1ST, ISO1436-1 TYPE 1ST

See page 49. ADAPTERS & TUBE FITTINGS

FC194 AQP/HI-IMPULSE Hose

HIGH PRESSURE HOSE

Exceeds SAE100R5

See page 41.

FC323 AQP Hose

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Exceeds SAE100R2 Performance Requirements

See page 50. Uniform Pressure Spiral Wire Hose 280,0 BAR [4000 psi]

Features the patented AQP tube compound and 4-spiral wire reinforcement. Uses the same fittings as FC323.

HOSE ASSEMBLY EQUIPMENT

FC324 AQP Hose

See page 50.

Uniform Pressure Spiral Wire Hose 350,0 BAR [5000 psi]

Features the patented AQP tube compound and 4-spiral wire reinforcement. Pressures to 350,0 BAR [5000 psi].

APPENDICIES

FC325 AQP Hose

See page 51.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

FC350 AQP Hose SPECIALTY & TRUCK HOSE

Exceeds FMVSS-106 Type All

FC355 AQP Hose LOW & MEDIUM PRESSURE HOSE

The revolutionary truck hose with superior abrasion resistance. Features an AQP tube for excellent fluid compatibility and temperature requirements.

See page 23.

Ideal for truck maintenance and piping conditions where fluid compatibility and chemical resistance are required.

Has a blue AQP elastomer cover for fluid resistance.

Fire resistant fuel hose meets USCG AI requirements. Offers positive fire resistance in

critical applications without using a firesleeve.

Offers extended fluid compatibility and operating temperature range for low pressure applications.

Used with Aeroquip brand SOCKETLESS fittings for quick and easy assembly.

For low pressure applications.

See page 36.

The dual-purpose hose with extensive fluid compatibility is ideal for either suction or chemical transfer applications.

See page 35.

See page 23.

Exceeds FMVSS-106 Type All

FC234 AQP Hose HIGH PRESSURE HOSE

FC332 AQP SOCKETLESS Hose

HOSE FITTINGS

FC498 AQP Hose

See page 25.

See page 33.

Exceeds SAE100R6 ADAPTERS & TUBE FITTINGS

2661 AQP Hose

Exceeds SAE100R4 ACCESSORIES & ASSEMBLY INSTRUCTIONS

GH194 MatchMate BLUE AQP/HI-IMPULSE Hose A thin cover, 1-wire version

Exceeds SAE 100R1AT

of AQP/HI-IMPULSE hose that allows the use of Aeroquip MatchMate Plus Thru-The-Cover (TTC) fittings.

GH195 MatchMate BLUE AQP/HI-IMPULSE Hose A thin cover, 2-wire version HOSE ASSEMBLY EQUIPMENT

Exceeds SAE 100R2AT

FC650 AQP Hose APPENDICIES

High Temperature Fuel and Oil

of AQP/HI-IMPULSE hose that allows the use of Aeroquip MatchMate Plus Thru-The-Cover (TTC) fittings. The revolutionary truck hose with superior abrasion resistance. Features an AQP tube for excellent fluid compatibility and temperature requirements.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Pressures to 227,0 BAR [3250 psi]. See page 39.

Pressures to 397,0 BAR [5750 psi]. See page 48.

Pressure to 70,0 BAR [1000 psi]. See page 24.

SPECIALTY & TRUCK HOSE

Synflex Thermoplastic Hose

3R30 Low Pressure Hose

• Low volumetric expansion • Rugged design

Operating temperature range of -40°C to +100°C [40°F to 212°F].

• Long continuous lengths • Low elongation • Best value 100R7 hose

Operating temperature range of -40°C to +100°C [-40°F to 212°F].

• SAE J517 non-conductive hose construction • Less than 50 microamperes leakage when subjected to 75,000 volts/ft for 5 minutes

• Flexible in low temperatures • Abrasion/UV resistant cover Operating temperature range of -54°C to +100°C [-65°F to 212°F].

• Single permanent fitting series fits all sizes • SAE 100R7 dimensions • Cut resistant – heavy duty design • Crush resistant

Operating temperature range of -40°C to +107°C [-45°F to 225°F].

• Highly flexible, even in cold temperatures • Small O.D. • Lightweight, yet rugged construction

Operating temperature range of -54°C to +94°C [-65°F to 200°F].

• Long life in impulse cycling and flexing • Designed for permanent or reusable fittings

Operating temperature range of -40°C to +100°C [-40°F to 212°F].

• SAE J517 non-conductive hose construction. Less than 50 microamperes leakage when subjected to 75,000 volts/ft for 5 minutes • Long life for impulse cycling and flexing

• UV resistant cover • Designed for permanent and reusable fittings Operating temperature range of -40°C to +100°C [-40°F to 212°F].

LOW & MEDIUM PRESSURE HOSE

Refer to Synflex Catalog E-HOOV-MC001-E for more information on Thermoplastic hose.

3130 Medium Pressure Hose

HIGH PRESSURE HOSE

SAE100R3 Performance Specifications

3580 Medium Pressure Hose

SAE100R1 & R7 Performance Specifications

30CT Constant Pressure Hose

ADAPTERS & TUBE FITTINGS

SAE100R7 Non-Conductive Requirements, ANSI A92.2 Specs

ACCESSORIES & ASSEMBLY INSTRUCTIONS

37AL Non-Conductive Medium Pressure Hose

HOSE FITTINGS

SAE100R7 Specifications

3R80 High Pressure Hose

HOSE ASSEMBLY EQUIPMENT

SAE 100R18 Specifications

3E80 Non-Conductive High Pressure Hose

SAE100R8 Specifications

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

SAE 100R8 Specifications

SPECIALTY & TRUCK HOSE Refer to Synflex Catalog E-HOOV-MC001-E for more information on Thermoplastic hose.

3V10 Very High Pressure Hose LOW & MEDIUM PRESSURE HOSE

• Compact size

• Lightweight

• Low elongation

Operating temperature range of -40°C to +66°C [40°F to +150°F].

• Designed for permanent high pressure fittings with hose guards • SAE J517 non-conductive hose construction. Less than 50 micro-amperes leakage when subjected to 75,000 volts/ft for 5 minutes • Compact size • Low elongation

• UV resistant cover • Designed for permanent high pressure fittings with hose guards Operating temperature range of -40°C to +66°C [40°F to +150°F].

3630 General Purpose Air and Water Hose

• Standard bold colors: gray, red, blue, yellow or black • Excellent abrasion and impact resistance • Lightweight

• 4:1 Burst to working pressure safety factor • Long life over rubber hose Operating temperature range of -23°C to +66°C [-10°F to 150°F].

3440 Moisture-Lok Hose

• High moisture barrier core tube • No plasticizers in the core tube • UV resistant cover • Custom colors available

Operating temperature range of -23°C to +66°C [-10°F to 150°F].

34CU High Pressure Transfer Hose

• Higher pressures than 3440 Moisture Lok series • High moisture barrier core tube • High chemical compatibility core tube • UV resistant cover • Custom colors available

Operating temperature range of -40°C to +100°C [-40°F to 212°F].

HIGH PRESSURE HOSE

3VE0 Non-Conductive Very High Pressure Hose

HOSE FITTINGS ADAPTERS & TUBE FITTINGS ACCESSORIES & ASSEMBLY INSTRUCTIONS

Kynar® Core Tube

HOSE ASSEMBLY EQUIPMENT APPENDICIES 16

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

A/C and Refrigeration Hose

FC558 R134a A/C and Refrigeration Hose

For more information, refer to catalog A-HOAC-MC001-E1.

Butyl tube and polyester braid, abraision-resistant cover. Designed to work with 100R5 reusable fittings. Temperature range is 40˚C to +121˚C [-40˚F to +250˚F].

For more information, refer to catalog A-HOAC-MC001-E1.

Hose constructed of polymide veneer tube, with synthetic rubber cover. Designed to work with 100R5 reusable fittings. Temperature range is -40˚C to +121˚C [-40˚F to +250˚F].

For more information, refer to catalog A-HOAC-MC001-E1.

Flexible hose is constructed of a corrugated polymide tube for exceptional flexibility in large bus applications. This is a factory crimp product. Please contact Eaton for additional information to qualify for field crimp of the

FC555 hose. Temperature range is -40˚C to +125˚C [-40˚F to +257˚F].

Hose constructed of polymide veneer tube with polyester reinforcement and synthetic rubber cover. The FC505 fitting program is factory crimp only.

Temperature range is -40˚C to +135˚C [-40˚F to +275˚F].

HIGH PRESSURE HOSE

Exceeds SAE-J2064, Type E.

Hose constructed of polymide veneer tube, with polyester reinforcement and chlorobutyl cover. Temperature range is -40˚C to +135˚C [-40˚F to +275˚F]. Fitting selection includes factory crimp and the E-Z Clip line of A/C connections.

HOSE FITTINGS

GH134 Multi-Refrigerant A/C and Refrigeration Hose

LOW & MEDIUM PRESSURE HOSE

Refer to A/C and Refrigeration Catalog A-HOAC-MC001-E1 for more information on A/C and Refrigferation hose.

FC802 Multi-Refrigerant A/C and Refrigeration Hose

ADAPTERS & TUBE FITTINGS

Meets SAE J2064 with 100R5 reusable fittings, sizes 10 to 24.

For more information, refer to catalog A-HOAC-MC001-E1.

HOSE ASSEMBLY EQUIPMENT

FC555 Multi-Refrigerant A/C and Refrigeration Hose

ACCESSORIES & ASSEMBLY INSTRUCTIONS

SAE-J2064, Type E construction.

Meets SAE-J2064.

For more information, refer to catalog A-HOAC-MC001-E1.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

FC505 Low Effusion, Multi-Refrigerant A/C and Refrigeration Hose

PTFE Hose SPECIALTY & TRUCK HOSE

Refer to Everflex Catalog E-HOEV-MC001-E for more information on PTFE hose.

Smooth Bore “S” Series Hose

LOW & MEDIUM PRESSURE HOSE HIGH PRESSURE HOSE

Smooth Bore “B” Series Hose

HOSE FITTINGS

Smooth Bore “STW” Series Hose

ADAPTERS & TUBE FITTINGS

Smooth Bore “S-3” Series Hose

ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT

Smooth Bore “SC” Series Hose

APPENDICIES 18

Everflex S Series tube is reinforced with 304 stainless steel wire. All sizes have a minimum of .040” thick extruded virgin PTFE. That is 33% more PTFE than most other manufacturers offer. The additional

PTFE results in improved bend radius, kink resistance and slows permeation of gases. Temperature range is -54˚C to +230˚C [-65˚F to +450˚F].

Everflex B Series is reinforced with bronze wire. All sizes have a minimum of 0.040” thick extended virgin PTFE. Everflex B Series hose has traditionally been used in high vibration envi-

ronments. Temperature range is -54˚C to +204˚C [-65˚F to +400˚F].

Everflex STW Series tube is reinforced with 304 stainless steel wire. STW hose is available as an alternative where competitors’ thin wall products are specified and S Series hose can not be substituted. Radius in inches to inside bend.

Multiply bend radius by 1.25 for dynamic applications. Temperature range is -54˚C to +230˚C [-65˚F to +450˚F].

S-3 with a PVC cover is a PTFE hose which can be used for DOT 571.106 hydraulic brake line applications. PVC cover is on the exterior in 0.020” thickness. The PVC cover is useful to protect motorcycle paint

jobs or provide durability in an abrasive environment. Temperature range is -40˚C to +93˚C [-40˚F to +200˚F].

SC Series hose is identical to the S series with one exception. SC hose has an internal conductive static dissipating liner that provides a path to the hose end fittings for applications where flow induced electrostatic charges can occur.

Radius in inches to inside bend. Multiply bend radius by 1.25 for dynamic applications. Temperature range is -54˚C to +230˚C [-65˚F to +450˚F].

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

For more information, refer to catalog E-HOEV-MC001-E.

Temperature range is -54˚C to +204˚C [-65˚F to +400˚F].

Convoluted PTFE tube with 304 stainless steel wire braid reinforcement.

water, tire manufacturing, electronics, steel mills, food processing, and tank truck transfer. Temperature range is -54˚C to +204˚C [-65˚F to +400˚F].

LOW & MEDIUM PRESSURE HOSE HOSE FITTINGS

HIGH PRESSURE HOSE

For more information, refer to catalog E-HOEV-MC001-E.

ADAPTERS & TUBE FITTINGS

Industrial applications include: automotive, platten presses, pharmaceutical, truck and bus, reverse osmosis, hydraulics, chemical processing, steam, air,

SPECIALTY & TRUCK HOSE

Hi-PSI Series hose is a heavy wall PTFE hose for very high pressure applications. The reinforcement is braided and not spiraled allowing for better hose flexibility.

For more information, refer to catalog E-HOEV-MC001-E.

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Conductive & Non-Conductive Convoluted Hose Conv-O-Crimp

static charges can occur. Radius in inches to inside bend. Multiply bend radius by 1.25 for dynamic applications. Temperature range is -54˚C to +204˚C [-65˚F to +400˚F].

HOSE ASSEMBLY EQUIPMENT

Smooth Bore “Hi-PSI” Series Hose

SCTW Series hose is identical to the STW Series with one exception. SCTW hose has an internal conductive static dissipating liner that provides a path to the hose end fittings for applications where flow induced electro-

APPENDICIES

Smooth Bore “SCTW” Series Hose

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

FC252 Silicone rubber (heater)

r Part Number

LOW & MEDIUM PRESSURE HOSE

FC252-06 FC252-08 FC252-10 FC252-12 FC252-16

Hose I.D.

9,7 12,7 16,0 19,1 25,4

0.38 0.50 0.63 0.75 1.00

HIGH PRESSURE HOSE

Construction Silicone rubber tube, braided fiber reinforcement and silicone rubber cover. Operating Temperature Range –54°C to +177°C [–65°F to +350°F]

Hose O.D.

Maximum Operating Pressure

bar

psi

bar

0.72 0.81 0.94 1.06 1.34

3,5 3,5 2,8 2,8 2,5

50 50 40 40 35

14,0 14,0 11,0 11,0 10,0

18,3 20,6 23,9 26,9 34,0

Application Heater hose for passenger cars and trucks; connecting lines from hot water heaters to coolant-circulating systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

Minimum Bend Radius

psi

200 200 160 160 140

38,1 50,8 63,5 76,2 101,6

Weight of Hose

Kg/m

lbs/ft

1.50 2.00 2.50 3.00 4.00

0,22 0,27 0,28 0,41 0,53

0.15 0.18 0.19 0.28 0.36

For Complete Agency Listings See pages 346-348.

Fitting Reference Reusable Clamp

Page

Fitting Reference Reusable Clamp

Page

184

HOSE FITTINGS

FC352 Silicone rubber (coolant)

Part Number

Hose I.D.

ADAPTERS & TUBE FITTINGS

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC352-08 FC352-10 FC352-12 FC352-14 FC352-16 FC352-18 FC352-20 FC352-22 FC352-24 FC352-26 FC352-28 FC352-32 FC352-36 FC352-38 FC352-40 FC352-44 FC352-48 FC352-56 FC352-64 FC352-96 FC352-112

HOSE ASSEMBLY EQUIPMENT

12,7 16,0 19,1 22,4 25,4 28,4 31,8 35,1 38,1 41,4 44,5 50,8 57,2 60,1 63,5 69,9 76,2 88,9 101,6 152,4 177,8

0.50 0.63 0.75 0.88 1.00 1.12 1.25 1.38 1.50 1.63 1.75 2.00 2.25 2.38 2.50 2.75 3.00 3.50 4.00 6.00 7.00

APPENDICIES

Construction Silicone rubber tube, four spirals of nylon and silicone rubber cover. Operating Temperature Range –54°C to +177°C [–65°F to +350°F]

Hose O.D.

Maximum Operating Pressure

bar

psi

bar

psi

Kg/m

0.94 1.06 1.19 1.32 1.44 1.56 1.69 1.82 1.94 2.06 2.19 2.44 2.69 2.82 2.94 3.19 3.44 3.94 4.44 6.47 7.47

7,0 7,0 7,0 7,0 6,0 6,0 5,9 5,9 5,9 5,6 5,6 5,2 5,2 4,2 4,2 3,5 3,5 2,8 2,5 2,0 1,0

100 100 100 100 90 90 85 85 85 80 80 75 75 60 60 50 50 40 35 25 19

30,0 30,0 30,0 30,0 26,0 26,0 24,0 24,0 24,0 22,0 22,0 21,0 21,0 17,0 17,0 14,0 14,0 12,0 10,5 7,0 6,0

425 425 425 425 375 375 350 350 350 325 325 300 300 250 250 200 200 175 150 100 75

0,25 0,32 0,40 0,46 0,50 0,61 0,66 0,74 0,81 0,86 0,93 1,06 1,20 1,24 1,31 1,45 1,56 1,85 2,13 3,45 4,03

23,9 26,9 30,2 33,5 36,6 39,6 42,9 46,2 49,3 52,3 55,6 62,0 68,3 71,6 74,7 81,0 87,4 100,1 112,8 164,3 189,7

Application Coolant system service with liquid-cooled engines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

Weight of Hose

lbs/ft

0.17 0.22 0.27 0.31 0.34 0.41 0.45 0.50 0.55 0.58 0.63 0.72 0.81 0.84 0.89 0.98 1.06 1.25 1.44 2.34 2.73

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

184

SPECIALTY & TRUCK HOSE

2550/2554 Airbrake SAE J1402 FMVSS106 r Hose O.D.

Minimum Bend Radius

Weight of Hose

bar

psi

bar

psi

Kg/m

lbs/ft

9,7 9,7

0.38 0.38

19,1 19,1

0.75 0.75

16,0 16,0

225 225

62,0 62,0

900 900

44,5 95,3

1.75 3.75

0,30 0,27

0.20 0.18

Construction Synthetic rubber tube, double textile braids and synthetic rubber cover. Operating Temperature Range 2550: –40°C to +93°C [–40°F to +200°F],

Application Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

2554: –54°C to +100°C [–65°F to +212°F]

2554 Conforms to ordinance spec. MIL-H-3992B, Type 1, Class 1.

For Complete Agency Listings See pages 346-348.

LOW & MEDIUM PRESSURE HOSE

2550-6 2554-6

Hose I.D.

Minimum Burst Pressure

Fitting Reference Page Reusable Fitting 182 Socket Data 65 Factory crimp fittings also available. Contact Eaton for details.

HIGH PRESSURE HOSE

Part Number

Maximum Operating Pressure

2570 HOSE FITTINGS

SAE J1402 FMVSS106

r Minimum Bend Radius

Weight of Hose

Hose I.D.

Hose O.D.

in.

bar

psi

bar

psi

in.

Kg/m lbs/ft

9,7 12,7 15,7

0.38 0.50 0.62

19,1 22,4 26,9

0.75 0.88 1.06

16,0 16,0 16,0

225 225 225

62,0 62,0 62,0

900 900 900

44,5 50,8 57,2

1.75 2.00 2.25

0,27 0,34 0,44

Construction Synthetic rubber tube, double textile braid and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Application Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

For Complete Agency Listings See pages 346-348.

‡ Crimp Fittings only, contact Eaton Aeroquip.

0.18 0.23 0.30

ADAPTERS & TUBE FITTINGS

2570-6 2570-8 2570-10‡

Minimum Burst Pressure

Fitting Reference Page Reusable Fitting 182 Socket Data 65 Factory crimp fittings also available. Contact Eaton for details.

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Part Number

Maximum Operating Pressure

FC629

HOSE ASSEMBLY EQUIPMENT

SAE J1402 FMVSS106

FC629-06 FC629-08

Hose I.D.

Hose O.D.

Minimum Burst Pressure

in.

bar

psi

bar

9,7 12,7

0.38 0.50

19,8 23,1

0.78 0.91

15,0 15,0

225 225

62,0 62,0

Construction Synthetic rubber tube, single polyester braid and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Application Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

Weight of Hose

psi

in.

Kg/m

lbs/ft

900 900

44,5 50,8

1.75 2.00

0,27 0,30

0.18 0.20

For Complete Agency Listings See pages 346-348.

Factory crimp fittings available. Contact Eaton for details.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

Part Number

Maximum Operating Pressure

SPECIALTY & TRUCK HOSE

FC829 Airbrake SAE J1402 FMVSS106

r Part Number

LOW & MEDIUM PRESSURE HOSE

FC829-08

Hose I.D.

Hose O.D.

in.

12,7

0.50

23,1

0.91

Construction EPDM rubber tube, double textile braids and EPDM rubber cover.

HIGH PRESSURE HOSE

Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Maximum Operating Pressure

Minimum Burst Pressure

Minimum Bend Radius

Weight of Hose

bar

psi

bar

psi

in.

Kg/m

lbs/ft

225

900

76,2

3.00

0,27

0.18

Application Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

For Complete Agency Listings See pages 346-348.

Factory crimp fittings available. Contact Eaton for details.

HOSE FITTINGS

1531/1531A Railroad Airbrake Exceeds AAR-M618

r ADAPTERS & TUBE FITTINGS

Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

1531-10‡ 1531-12 1531-16‡ 1531-20 1531A-24‡

Hose I.D.

Hose O.D.

Maximum Operating Pressure

Minimum Burst Pressure

in.

bar

psi

bar

12,7 16,0 22,4 28,7 35,1

0.50 0.63 0.88 1.13 1.38

23,9 28,4 35,1 41,4 47,8

0.94 1.12 1.38 1.63 1.88

21,0 21,0 21,0 21,0 21,0

300 300 300 300 300

84,0 84,0 84,0 84,0 84,0

Construction Synthetic rubber tube, partial textile braid, wire reinforcement (1531-10 and 1531-12 have single wire braid; 1531-16, 1531-20 and 1531A-24 have double wire braid) and synthetic rubber cover.

Application Locomotive airbrake lines. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

psi

1200 1200 1200 1200 1200

139,7 165,1 187,5 241,3 266,7

HOSE ASSEMBLY EQUIPMENT APPENDICIES EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

in.

Kg/m

lbs/ft

5.50 6.50 7.38 9.50 10.50

0,57 0,71 1,07 1,16 1,55

0.38 0.48 0.72 0.78 1.04

For Complete Agency Listings See pages 346-348.

Operating Temperature Range –54°C to +100°C [–65°F to +212°F]

Minimum Bend Radius

Fitting Reference Page Reusable Fitting 185 Socket Data 65 ‡ Crimp fittings also available for these sizes. Contact Eaton for information.

SPECIALTY & TRUCK HOSE

FC355 AQP Engine & Airbrake FMVSS106

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,7 35,1 46,0

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.13 1.38 1.81

Construction AQP elastomer tube, polyester inner braid and a single wire braid reinforcement, blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

13,2 14,7 17,3 19,6 23,9 27,4 31,5 38,6 44,5 56,4

0.52 0.58 0.68 0.77 0.94 1.08 1.24 1.52 1.75 2.22

bar

psi

bar

105,0 105,0 105,0 87,0 87,0 52,0 28,0 21,0 17,0 14,0

1500 1500 1500 1250 1250 750 400 300 250 200

420,0 420,0 420,0 350,0 350,0 210,0 112,0 87,0 70,0 56,0

Application Air, gasoline, fuel, lubricating oils and coolants. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

psi

6000 6000 6000 5000 5000 3000 1600 1250 1000 800

19,1 25,4 31,8 44,5 57,2 69,9 88,9 114,3 139,7 215,9

Vacuum Service

kPa

0.75 1.00 1.25 1.75 2.25 2.75 3.50 4.50 5.50 8.50

94,8 94,8 94,8 94,8 94,8 67,7 50,8 50,8 37,2 37,2

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 20 15 15 11 11

0,22 0,34 0,35 0,43 0,59 0,68 0,74 0,87 1,02 1,37

0.17 0.20 0.24 0.29 0.40 0.46 0.50 0.59 0.69 0.93

Fitting Reference Crimp 100R5 Reusable Fitting Socket Data

HIGH PRESSURE HOSE

FC355-04 FC355-05 FC355-06 FC355-08 FC355-10 FC355-12 FC355-16 FC355-20 FC355-24 FC355-32

Hose I.D.

Minimum Bend Radius

Page 134

HOSE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

136 65

ADAPTERS & TUBE FITTINGS

Air not to exceed 250 psi or +121°C [+250°F].

FC350 AQP Engine & Airbrake FMVSS106

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,4 35,1

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38

Construction AQP elastomer tube, polyester inner braid and a single wire braid reinforcement; black polyester textile braided cover. Operating Temperature Range –49°C to +150°C [–55°F to +302°F]

Hose O.D.

13,2 14,7 17,3 19,6 23,9 27,4 31,2 38,1 44,5

0.52 0.58 0.68 0.77 0.94 1.08 1.23 1.50 1.75

bar

psi

bar

140,0 105,0 105,0 87,0 87,0 52,0 28,0 21,0 17,0

2000 1500 1500 1250 1250 750 400 300 250

560,0 420,0 420,0 350,0 350,0 210,0 112,0 84,0 70,0

Application Air, gasoline, fuel lubricating oils and coolants. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

psi

8000 6000 6000 5000 5000 3000 1600 1200 1000

19,1 25,4 31,8 44,5 57,2 69,9 88,9 114,3 139,7

Vacuum Service

kPa

0.75 1.00 1.25 1.75 2.25 2.75 3.50 4.50 5.50

94,8 94,8 94,8 94,8 94,8 67,7 50,8 50,8 37,2

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 20 15 15 11

0,22 0,34 0,35 0,43 0,59 0,68 0,74 0,87 1,02

0.13 0.16 0.20 0.23 0.33 0.39 0.50 0.56 0.63

Fitting Reference Crimp 100R5 Reusable Fitting Socket Data

HOSE ASSEMBLY EQUIPMENT

FC350-04 FC350-05 FC350-06 FC350-08 FC350-10 FC350-12 FC350-16 FC350-20 FC350-24

Hose I.D.

Minimum Bend Radius

Page 134 APPENDICIES

Part Number

Minimum Burst Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Maximum Operating Pressure

136 65

Air not to exceed +121°C [+250°F].

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

FC650 AQP High temperature fuel & oil

r Part Number

LOW & MEDIUM PRESSURE HOSE

FC650-04 FC650-06 FC650-08 FC650-10 FC650-12

Hose I.D.

4,8 7,9 10,4 12,7 16,0

0.19 0.31 0.41 0.50 0.63

HIGH PRESSURE HOSE

Construction AQP elastomer tube, single wire braid reinforcement, black polyester braided cover. Operating Temperature Range –49°C to +150°C [–55°F to +302°F] Air not to exceed +121°C [+250°F].

Hose O.D.

12,2 16,0 18,8 21,1 25,1

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

0.48 0.63 0.74 0.83 0.99

70,0 70,0 70,0 70,0 70,0

1000 1000 1000 1000 1000

280,0 280,0 280,0 280,0 280,0

Application Diesel fuel, gasoline, lubricating oils, water, coolant and air. Not approved for airbrake applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

Vacuum Service

psi

kPa

4000 4000 4000 4000 4000

19,1 31,8 44,5 57,2 69,9

0.75 1.25 1.75 2.25 2.75

94,8 94,8 94,8 94,8 67,7

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 20

0,15 0,22 0,28 0,34 0,41

0.10 0.15 0.19 0.23 0.28

Factory crimp fittings available. Contact Eaton for details.

HOSE FITTINGS ADAPTERS & TUBE FITTINGS

FC699 AQP High temperature fuel AQP lightweight engine hose

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Part Number

HOSE ASSEMBLY EQUIPMENT

FC699-04 FC699-06 FC699-08 FC699-10 FC699-12 FC699-16

Hose I.D.

6,4 9,7 12,7 16,0 19,1 25,4

0.25 0.38 0.50 0.63 0.75 1.00

Construction AQP elastomer tube, single aramid reinforcement braid and textile braided cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F].

Hose O.D.

12,4 16,0 19,6 23,9 27,4 33,8

Maximum Operating Pressure

bar

0.49 0.63 0.77 0.94 1.08 1.33

28,0 28,0 28,0 24,0 24,0 17,0

psi

400 400 400 350 350 250

Application Diesel fuel, gasoline, crude and lubricating oils. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

112,0 112,0 112,0 98,0 98,0 70,0

psi

1600 1600 1600 1400 1400 1000

31,8 38,1 50,8 63,5 76,2 114,3

APPENDICIES EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Vacuum Service

kPa

1.25 1.50 2.00 2.50 3.00 4.50

94,8 94,8 94,8 61,0 61,0 61,0

For Complete Agency Listings See pages 346-348.

Air not to exceed 250 psi or +121°C [+250°F].

Minimum Bend Radius

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18 18

0,09 0,15 0,19 0,27 0,30 0,41

0.06 0.10 0.13 0.18 0.20 0.28

Fitting Reference Crimp OTC

Page 66

SPECIALTY & TRUCK HOSE

FC234 AQP High temperature fuel and oil Fire resistant USCG/MMT, NMMA/BIA

6,4 7,9 10,4 12,7 16,0 22,4

0.25 0.31 0.41 0.50 0.63 0.88

Construction AQP elastomer tube, brass plated steel wire reinforcement, braided refractory insulation and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

14,7 17,3 19,3 23,9 27,4 31,5

0.58 0.68 0.76 0.94 1.08 1.24

bar

psi

bar

105,0 105,0 87,0 87,0 52,0 28,0

1500 1500 1250 1250 750 400

420,0 420,0 350,0 350,0 210,0 112,0

Application Diesel fuel, gasoline, hot lube oil and water. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Vacuum Service

psi

kPa

6000 6000 5000 5000 3000 1600

25,4 31,8 44,5 57,2 69,9 88,9

1.00 1.25 1.75 2.25 2.75 3.50

94,8 94,8 94,8 94,8 67,7 54,2

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 20 16

0,32 0,37 0,44 0,66 0,71 0,75

0.22 0.25 0.30 0.45 0.48 0.51

Fitting Reference Crimp 100R5 Reusable Fitting Socket Data

HIGH PRESSURE HOSE

FC234-05 FC234-06 FC234-08 FC234-10 FC234-12 FC234-16

Hose I.D.

Minimum Bend Radius

Page 134 136 65

HOSE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

2651 Single wire braid

ADAPTERS & TUBE FITTINGS

SAE 100R5 performance

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,4 35,1 46,0 60,1

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38 1.81 2.38

Construction Synthetic rubber tube, textile inner braid, single wire braid reinforcement, outer textile braid and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

13,2 14,7 17,3 19,1 23,4 27,4 31,2 38,1 44,5 56,4 73,2

0.52 0.58 0.68 0.75 0.92 1.08 1.23 1.50 1.75 2.22 2.88

bar

psi

bar

psi

210,0 210,0 157,0 140,0 122,0 105,0 56,0 43,0 35,0 24,0 24,0

3000 3000 2250 2000 1750 1500 800 625 500 350 350

840,0 840,0 630,0 560,0 490,0 420,0 224,0 175,0 140,0 98,0 98,0

12000 12000 9000 8000 7000 6000 3200 2500 2000 1400 1400

Application Hydraulics, gasoline, fuel and lubricating oils, air and water. Air not to exceed 250 psi or +71°C [+160°F]. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

76,2 3.00 85,9 3.38 101,6 4.00 117,3 4.62 139,7 5.50 165,1 6.50 187,5 7.38 228,6 9.00 266,7 10.50 336,6 13.25 609,6 24.00

For Complete Agency Listings See pages 346-348. †Maximum negative pressures shown for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended.

Vacuum Service

kPa

94,8 94,8 94,8 94,8 94,8 94,8 67,7 67,7 50,8 37,3 37,3

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 28 20† 20† 15† 11† 11†

0,19 0,24 0,34 0,38 0,55 0,68 0,65 0,77 0,99 1,39 2,11

0.13 0.16 0.23 0.26 0.37 0.46 0.44 0.52 0.67 0.94 1.43

Fitting Reference Reusable Fitting Socket Data

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Hose O.D.

Minimum Bend Radius

HOSE ASSEMBLY EQUIPMENT

2651-4 2651-5 2651-6 2651-8 2651-10 2651-12 2651-16 2651-20 2651-24 2651-32 2651-40

Hose I.D.

Minimum Burst Pressure

Page 136 65

APPENDICIES

Part Number

Maximum Operating Pressure

SPECIALTY & TRUCK HOSE

303/302A Single wire braid MIL-DTL-8794

r LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

303-4 303-5 303-6 303-8 303-10 303-12 302A-16 302A-20 302A-24 302A32

Hose I.D.

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,4 35,1 46,0

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38 1.81

Construction Synthetic rubber tube, textile inner braid, single wire braid reinforcement and black textile braid cover.

HOSE FITTINGS

Operating Temperature Range 303 hose: –54°C to +121°C [65°F to +250°F]

Hose O.D.

13,2 14,7 17,3 19,6 23,4 27,4 31,2 38,1 44,5 56,4

0.52 0.58 0.68 0.77 0.92 1.08 1.23 1.50 1.75 2.22

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

210,0 210,0 140,0 140,0 122,0 105,0 56,0 42,0 35,0 24,0

3000 3000 2000 2000 1750 1500 800 600 500 350

840,0 700,0 630,0 560,0 490,0 420,0 224,0 175,0 140,0 98,0

12000 10000 9000 8000 7000 6000 3200 2500 2000 1400

Application Hydraulics, air, gasoline, fuel and lubricating oils. Air not to exceed +71°C [+160°F]. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

76,2 3.00 85,9 3.38 101,6 4.00 117,3 4.62 139,7 5.50 165,1 6.50 187,5 7.38 228,6 9.00 279,4 11.00 336,6 13.25

For Complete Agency Listings See pages 346-348.

Vacuum Service

kPa

94,8 94,8 94,8 94,8 94,8 94,8 94,8 94,8 94,8 94,8

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 28 28 28 28 28

0,22 0,28 0,32 0,38 0,53 0,62 0,55 0,68 0,81 1,15

0.15 0.19 0.22 0.26 0.36 0.46 0.44 0.52 0.67 0.94

Fitting Reference Reusable Fitting Socket Data

Page 136 65

302A hose: –40°C to +121°C [–40°F to +250°F]

ADAPTERS & TUBE FITTINGS

1503 Single wire braid SAE 100R5

r ACCESSORIES & ASSEMBLY INSTRUCTIONS

Part Number

HOSE ASSEMBLY EQUIPMENT

1503-4 1503-5 1503-6 1503-8 1503-10 1503-12 1503-16 1503-20 1503-24 1503-32 1503-40

Hose I.D.

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,4 35,1 46,0 60,1

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38 1.81 2.38

Construction Synthetic rubber tube, textile inner braid, single wire braid reinforcement and black textile braid cover. APPENDICIES

Operating Temperature Range –40°C to +121°C [–40°F to +250°F] Air not to exceed +71°C ([+160°F].

Hose O.D.

13,2 14,7 17,3 19,6 23,4 27,4 31,2 38,1 44,5 56,6 73,2

0.52 0.58 0.68 0.77 0.92 1.08 1.23 1.50 1.75 2.23 2.88

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

210,0 210,0 157,0 140,0 122,0 105,0 56,0 43,0 35,0 24,0 24,0

3000 3000 2250 2000 1750 1500 800 625 500 350 350

840,0 840,0 630,0 560,0 490,0 420,0 224,0 175,0 140,0 98,0 98,0

12000 12000 9000 8000 7000 6000 3200 2500 2000 1400 1400

Application Hydraulics, air, gasoline, fuel and lubricating oils. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

76,2 3.00 85,9 3.38 101,6 4.00 117,3 4.62 139,7 5.50 165,1 6.50 187,5 7.38 228,6 9.00 266,7 10.50 366,6 13.25 609,6 24.00

†Maximum negative pressures shown for -16 and larger are suitable only for those which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Vacuum Service

kPa

94,8 94,8 94,8 94,8 94,8 94,8 67,7 67,7 50,8 37,3 37,3

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 28 20† 20† 15† 11† 11†

0,19 0,24 0,27 0,32 0,49 0,58 0,55 0,68 0,92 1,28 2,11

0.13 0.16 0.23 0.26 0.37 0.46 0.44 0.52 0.67 0.94 1.43

Fitting Reference Crimp 100R5 Reusable Fitting Socket Data

Page 134 136 65

SPECIALTY & TRUCK HOSE

FC300 AQP Single wire braid Exceeds SAE 100R5

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,4 35,1 46,0 60,1

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38 1.81 2.38

Construction AQP elastomer tube, polyester inner braid, single wire braid reinforcement and blue polyester braid cover. Operating Temperature Range –49°C to +150°C [–55°F to +302°F] Air not to exceed +121°C [+250°F].

13,2 14,7 17,3 19,6 23,4 27,4 31,2 38,1 44,5 56,4 73,2

0.52 0.58 0.67 0.76 0.93 1.08 1.27 1.50 1.75 2.22 2.88

bar

psi

bar

psi

210,0 210,0 157,0 140,0 122,0 105,0 56,0 43,0 35,0 21,0 21,0

3000 3000 2250 2000 1750 1500 800 625 500 300 300

840,0 840,0 630,0 560,0 490,0 420,0 224,0 175,0 140,0 84,0 84,0

12000 12000 9000 8000 7000 6000 3200 2500 2000 1200 1200

Application Hydraulics handling petroleum base fluids and air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids and other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Vacuum Service

kPa

76,2 3.00 85,9 3.38 101,6 4.00 117,3 4.62 139,7 5.50 165,1 6.50 187,5 7.38 228,6 9.00 266,7 10.50 336,6 13.25 609,6 24.00

†Maximum negative pressure shown for -16 and larger are suitable for those which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. ‡ Does not meet SAE 100R5 pressure with reusable fittings. -32 size rated to 350 psi with crimp fittings.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 28 20† 20† 15† 11† 8†

0,19 0,24 0,27 0,32 0,49 0,58 0,55 0,68 0,92 1,28 2,11

0.13 0.16 0.23 0.26 0.37 0.46 0.44 0.52 0.67 0.94 1.50

94,8 94,8 94,8 94,8 94,8 94,8 67,7 67,7 50,8 37,3 27,1

Fitting Reference Crimp 100R5 Reusable Fitting Socket Data

LOW & MEDIUM PRESSURE HOSE

Hose O.D.

Minimum Bend Radius

HIGH PRESSURE HOSE

FC300-04 FC300-05 FC300-06 FC300-08 FC300-10 FC300-12 FC300-16 FC300-20 FC300-24 FC300-32‡ FC300-40‡

Hose I.D.

Minimum Burst Pressure

Page 134 HOSE FITTINGS

Part Number

Maximum Operating Pressure

136 65

ADAPTERS & TUBE FITTINGS

For Complete Agency Listings See pages 346-348.

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC321 LPG UL listing MH6044 r

4,8 6,4 7,9 10,4 12,7 16,0 22,4

0.19 0.25 0.31 0.41 0.50 0.63 0.88

Construction Synthetic rubber tube, a textile inner braid, a stainless steel wire braid reinforcement and a synthetic rubber impregnated textile braid cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

13,2 14,7 17,0 19,6 23,4 27,4 31,5

bar

psi

bar

0.52 0.58 0.67 0.77 0.92 1.08 1.24

24,0 24,0 24,0 24,0 24,0 24,0 24,0

350 350 350 350 350 350 350

122,0 122,0 122,0 122,0 122,0 122,0 122,0

Application Designed for butane-propane applications on either mobile or stationary equipment. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

Weight of Hose

psi

Kg/m

lbs/ft

1750 1750 1750 1750 1750 1750 1750

38,1 44,5 50,8 58,7 69,9 82,6 93,7

1.50 1.75 2.00 2.31 2.75 3.25 3.69

0,16 0,19 0,27 0,31 0,43 0,55 0,56

0.11 0.13 0.18 0.21 0.29 0.37 0.38

WARNING: LPG is a very hazardous liquid or gas and should be handled with maximum care to prevent leakage. Since the gas is heavier than air, it may flow along the ground if it escapes and cause an explosion or a fire. No leakage should ever be tolerated.

Fitting Reference Reusable Fitting Socket Data

HOSE ASSEMBLY EQUIPMENT

FC321-04 FC321-05 FC321-06 FC321-08 FC321-10 FC321-12 FC321-16

Hose I.D.

Minimum Burst Pressure

Page 136 65

APPENDICIES

Part Number

Maximum Operating Pressure

For Complete Agency Listings See pages 346-348. EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

CR170 LPG Single stainless steel braid CGA (Canadian Gas Association) Type III

r LOW & MEDIUM PRESSURE HOSE

Part Number

CR170-04 CR170-06 CR170-08 CR170-12

Hose I.D.

4,8 7,9 10,4 15,9

0.19 0.31 0.41 0.63

HIGH PRESSURE HOSE

Construction Nylon tube, single stainless steel braid reinforcement, perforated synthetic rubber cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

13,2 17,0 19,6 28,0

Maximum Operating Pressure

Minimum Burst Pressure

Minimum Bend Radius

bar

psi

bar

psi

0.52 0.67 0.77 1.10

24,0 24,0 24,0 24,0

350 350 350 350

840,0 12000 630,0 9000 560,0 8000 414,0 6000

76,2 101,6 117,3 165,1

Application LPG (propane) vehicle, alternative fuel conversion systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Weight of Hose

Kg/m

lbs/ft

3.00 4.00 4.62 6.50

0,24 0,32 0,38 0,71

0.16 0.22 0.26 0.48

Factory crimp fittings available. Contact Eaton for details.

For Complete Agency Listings See pages 346-348. HOSE FITTINGS

NOTE: Must be CGA certified to crimp assemblies.

2807 PTFE SAE 100R14A

ADAPTERS & TUBE FITTINGS

r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT

2807-3 2807-4 2807-5 2807-6 2807-8 2807-10 2807-12 2807-16 2807-20

Hose I.D.

3,6 4,8 6,6 8,1 10,7 13,0 16,3 22,4 28,4

0.14 0.19 0.26 0.32 0.42 0.51 0.64 0.88 1.12

Construction Extruded PTFE tube with stainless steel single wire braid. Operating Temperature Range –73°C to +260°C [–100°F to +500°F]

Hose O.D.

6,4 7,6 9,4 10,9 13,7 16,0 19,3 26,2 32,8

0.25 0.30 0.37 0.43 0.54 0.63 0.76 1.03 1.29

Maximum Operating Pressure

bar

psi

bar

psi

210,0 210,0 210,0 175,0 140,0 105,0 84,0 70,0 43,0

3000 3000 3000 2500 2000 1500 1200 1000 625

840,0 840,0 840,0 700,0 560,0 420,0 335,0 280,0 175,0

12000 12000 12000 10000 8000 6000 4800 4000 2500

Application Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

APPENDICIES

† Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton.

Minimum Burst Pressure

Minimum Bend Radius

38,1 1.50 50,8 2.00 76,2 3.00 101,6 4.00 133,4 5.25 165,1 6.50 196,9 7.75 228,6 9.00 406,4 16.00

‡Maximum negative pressure for 06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for 06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Vacuum Service

kPa

94,8 94,8 94,8 94,8‡ 94,8‡ 94,8‡ 94,8‡ 40,6‡ 40,6‡

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28‡ 28‡ 28‡ 28‡ 12‡ 12‡

0,06 0,09 0,12 0,15 0,18 0,24 0,27 0,39 0,51

0.04 0.06 0.08 0.10 0.12 0.16 0.18 0.26 0.34

Fitting Reference Crimp Fitting Socket Data Reusable Fitting Socket Data

Page 129 64 186 65

SPECIALTY & TRUCK HOSE

S-TW Series Smooth Bore Meets SAE 100R14A

4,8 6,6 8,1 10,7 13,0 16,3 22,4

0.19 0.26 0.32 0.42 0.51 0.64 0.88

Construction Extruded PTFE tube with stainless steel single wire braid. Operating Temperature Range –54°C to +230°C [–65°F to +450°F]

7,6 9,4 10,9 13,7 16,0 19,3 26,2

0.30 0.37 0.43 0.54 0.63 0.76 1.03

bar

psi

bar

psi

210,0 210,0 175,0 140,0 105,0 84,0 70,0

3000 3000 2500 2000 1500 1200 1000

840,0 840,0 700,0 560,0 420,0 335,0 280,0

12000 12000 10000 8000 6000 4800 4000

50,8 76,2 101,6 127,0 165,1 190,5 228,6

Vacuum Service

kPa

2.00 3.00 4.00 5.00 6.50 7.50 9.00

94,8 94,8 94,8‡ 94,8‡ 94,8‡ 94,8‡ 40,6‡

‡ Maximum negative pressure for -16 and larger are suitable for hose which has sufferend no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28‡ 28‡ 28‡ 28‡ 12‡

0,09 0,12 0,15 0,18 0,24 0,27 0,35

0.06 0.08 0.10 0.12 0.16 0.18 0.26

Fitting Reference Crimp Fitting Socket Data Reusable Fitting Socket Data

LOW & MEDIUM PRESSURE HOSE

Hose O.D.

Minimum Bend Radius

HIGH PRESSURE HOSE

S-4TW S-5TW S-6TW S-8TW S-10TW S-12TW S-16TW

Hose I.D.

Minimum Burst Pressure

Page 129 64 186 65

* See Everflex catalog E-HOEV-MC001-E for additional hose sizes and fitting options.

HOSE FITTINGS

Part Number

Maximum Operating Pressure

ADAPTERS & TUBE FITTINGS

FC465 PTFE Conductive SAE 100R14B FDA Compliant per 21CFR178.3297 r

3,6 4,8 6,6 8,1 10,7 13,0 16,3 22,4 28,4

0.14 0.19 0.26 0.32 0.42 0.51 0.64 0.88 1.12

Construction Conductive extruded black PTFE tube with stainless steel single wire braid. Operating Temperature Range –73°C to +260°C [–100°F to +500°F]

6,4 7,6 9,4 10,9 13,7 16,0 19,3 26,2 32,8

0.25 0.30 0.37 0.43 0.54 0.63 0.76 1.03 1.29

bar

psi

bar

psi

210,0 210,0 210,0 175,0 140,0 105,0 84,0 70,0 43,0

3000 3000 3000 2500 2000 1500 1200 1000 625

840,0 840,0 840,0 700,0 560,0 420,0 335,0 280,0 175,0

12000 12000 12000 10000 8000 6000 4800 4000 2500

Application Steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

†Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton.

38,1 1.50 50,8 2.00 76,2 3.00 101,6 4.00 133,4 5.25 165,1 6.50 196,9 7.75 228,6 9.00 406,4 16.00

‡Maximum negative pressure for 06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.

Vacuum Service

kPa

94,8 94,8 94,8 94,8‡ 94,8‡ 94,8‡ 94,8‡ 40,6‡ 40,6‡

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28‡ 28‡ 28‡ 28‡ 12‡ 12‡

0,06 0,09 0,12 0,15 0,18 0,24 0,27 0,39 0,51

0.04 0.06 0.08 0.10 0.12 0.16 0.18 0.26 0.34

Fitting Reference Crimp Fitting Socket Data Reusable Fitting Socket Data

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Hose O.D.

Minimum Bend Radius

HOSE ASSEMBLY EQUIPMENT

FC465-03 FC465-04 FC465-05 FC465-06 FC465-08 FC465-10 FC465-12 FC465-16 FC465-20

Hose I.D.

Minimum Burst Pressure

Page 129 64 186 65

APPENDICIES

Part Number

Maximum Operating Pressure

For Complete Agency Listings See pages 346-348. EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

2808 PTFE

r Part Number

LOW & MEDIUM PRESSURE HOSE

2808-08 2808-10 2808-12 2808-16 2808-20 2808-24

Hose I.D.

10,7 12,9 16,5 22,3 28,4 35,0

0.42 0.51 0.65 0.88 1.12 1.38

HIGH PRESSURE HOSE

Construction Extruded PTFE tube with double stainless steel braids. Operating Temperature Range –73°C to +260°C [–100°F to +500°F]

Hose O.D.

14,7 17,3 20,6 27,7 34,3 41,1

0.58 0.68 0.81 1.09 1.35 1.62

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

190,0 172,0 121,0 103,0 78,0 55,0

2750 2500 1750 1500 1125 800

758,0 689,0 483,0 414,0 310,0 221,0

11000 10000 7000 6000 4500 3200

HOSE FITTINGS

Application Hot air, steam and most chemical applications. Not recommended for steam-cold water cycling. For more information on specific fluid applications and high temperatre ratings, see pages 400-404. † Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton.

Minimum Bend Radius

117,3 4.62 139,7 5.50 165,1 6.50 187,4 7.38 279,4 11.00 355,6 14.00

‡Maximum negative pressure for 08 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for 08 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -08 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. For Complete Agency Listings See pages 397-398.

Vacuum Service

kPa

94,8‡ 94,8‡ 67,7‡ 50,8‡ 50,8‡ 50,8‡

Weight of Hose

in/Hg

Kg/m

lbs/ft

28‡ 28‡ 20‡ 15‡ 15‡ 15‡

0,30 0,39 0,45 0,65 0,85 1,04

0.20 0.26 0.30 0.44 0.57 0.70

Fitting Reference Reusable Fitting Socket Data

Page 189 65

ADAPTERS & TUBE FITTINGS

FC469 PTFE Conductive r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC469-06 FC469-08 FC469-10

Hose I.D.

Hose O.D.

in.

7,6 9,9 12,4

0.30 0.39 0.49

12,2 15,5 18,3

Construction Conductive extruded PTFE tube with stainless steel single wire braid.

HOSE ASSEMBLY EQUIPMENT

Operating Temperature Range –54°C to +204°C [–65°F to +400°F]

in.

0.48 0.61 0.72

Maximum Operating Pressure

bar

psi

280,0 4000 280,0 4000 245,0 3500

Application High pressure chemical and fluid transfer. For information on specific fluid applications and high temperature ratings, see pages 400-404.

† Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton.

Minimum Burst Pressure

bar

psi

1120,0 16000 1120,0 16000 980,0 14000

63,5 73,2 82,6

in.

2.50 2.88 3.25

‡Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. For Complete Agency Listings See pages 397-398.

APPENDICIES 30

Minimum Bend Radius

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Vacuum Service

Weight of Hose

kPa

in/Hg

Kg/m

94,8‡ 94,8‡ 94,8‡

28‡ 28‡ 28‡

0,25 0,36 0,43

lbs/ft

0.17 0.24 0.29

Contact Eaton for fitting information.

SPECIALTY & TRUCK HOSE

FC363 Convoluted PTFE Nonconductive tube

bar

psi

0.54 0.63 0.81 1.00 1.24 1.52 2.00

18,8 22,4 26,9 32,5 38,9 46,0 58,7

0.74 0.88 1.06 1.28 1.53 1.81 2.31

87,0 69,0 76,0 70,0 70,0 52,0 35,0

1250† 1000† 1100† 1000† 1000† 750† 500†

Construction Convoluted PTFE tube with stainless steel single wire braid cover. Operating Temperature Range –54°C to +204°C [–65°F to +400°F]

Application Chemical, food, water and waste handling, and various transfer applications. Not recommended for steam-cold water cycling or air. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

350,0 248,0 303,0 280,0 280,0 210,0 140,0

psi

5000 3600 4400 4000 4000 3000 2000

73,2 2.88 76,2 3.00 95,3 3.75 127,0 5.00 158,8 6.25 190,5 7.50 254,0 10.00

†Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton. For Complete Agency Listings See pages 346-348.

Minimum Kink Radius

25,4 38,1 50,8 63,5 88,9 114,3 152,4

Vacuum Service

kPa

in/Hg

1.00 1.50 2.00 2.50 3.50 4.50 6.00

94,8 94,8 94,8 81,3 67,7 40,6 16,9

28 28 28 24 20 12 5

Fitting Reference Crimp Fitting Socket Data OTC*

LOW & MEDIUM PRESSURE HOSE

13,7 16,0 20,6 25,4 31,5 38,6 50,8

Minimum Bend Radius

HIGH PRESSURE HOSE

FC363-08 FC363-10 FC363-12 FC363-16 FC363-20 FC363-24 FC363-32

Hose O.D.

Hose I.D.

Minimum Burst Pressure

Page 131 64 66

* Applications under 250 psi (sizes -10 thru -24) not recommended for air applications.

HOSE FITTINGS

Part Number

Maximum Operating Pressure

FC364 Convoluted PTFE

ADAPTERS & TUBE FITTINGS

Conductive tube

13,7 16,0 20,6 25,4 31,5 38,6 50,8

bar

psi

bar

psi

0.54 0.63 0.81 1.00 1.24 1.52 2.00

18,8 22,4 26,9 32,3 38,9 46,0 58,7

0.74 0.88 1.06 1.27 1.53 1.81 2.31

87,0 69,0 76,0 70,0 70,0 52,0 35,0

1250† 1000† 1100† 1000† 1000† 750† 500†

350,0 248,0 303,0 280,0 280,0 210,0 140,0

5000 3600 4400 4000 4000 3000 2000

Construction Convoluted conductive PTFE tube with stainless steel wire braid cover. Operating Temperature Range –54°C to +204°C [–65°F to +400°F]

Application Steam lines and fuel transfer applications where static dissipation is required. Not recommended for steam-cold water cycling or air. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

73,2 2.88 76,2 3.00 95,3 3.75 127,0 5.00 158,8 6.25 190,5 7.50 254,0 10.00

†Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements. Contact Eaton. For Complete Agency Listings See pages 346-348.

Minimum Kink Radius

25,4 38,1 50,8 63,5 88,9 114,3 152,4

Vacuum Service

kPa

in/Hg

1.00 1.50 2.00 2.50 3.50 4.50 6.00

94,8 94,8 94,8 81,3 67,7 40,6 16,9

28 28 28 24 20 12 5

Fitting Reference Crimp Fitting Socket Data OTC*

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC364-08 FC364-10 FC364-12 FC364-16 FC364-20 FC364-24 FC364-32

Hose O.D.

Minimum Bend Radius

Page HOSE ASSEMBLY EQUIPMENT

Hose I.D.

Minimum Burst Pressure

131 64 66

* Applications under 250 psi (sizes -10 thru -24) not recommended for air applications.

APPENDICIES

Part Number

Maximum Operating Pressure

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

FC563 Convoluted PTFE Nonconductive tube

LOW & MEDIUM PRESSURE HOSE

r Part Number

HIGH PRESSURE HOSE

FC563-08 FC563-12 FC563-16 FC563-20 FC563-24 FC563-32

Hose I.D.

Hose O.D.

Maximum Operating Pressure

Minimum Burst Pressure

Minimum Bend Radius

Vacuum Service

bar

psi

bar

psi

kPa

in/Hg

13,7 20,6 25,4 31,5 38,6 50,8

0.54 0.81 1.00 1.24 1.52 2.00

18,8 29,9 32,5 38,9 46,0 58,7

0.74 1.06 1.28 1.53 1.81 2.31

87,0 76,0 70,0 70,0 52,0 35,0

1250 1100 1000 1000 750 500

350,0 303,0 280,0 280,0 210,0 140,0

5000 4400 4000 4000 3000 2000

73,2 95,3 127,0 158,8 190,5 254,0

2.88 3.75 5.00 6.25 7.50 10.00

94,8 94,8 81,2 67,7 33,9 23,7

28 28 24 20 10 7

Construction Convoluted PTFE tube with stainless steel single wire braid reinforcement and integral black polyester overbraid cover.

HOSE FITTINGS

Operating Temperature Range –54°C to +150°C [–65°F to +300°F]

Application Chemical transfer and various chemical processing applications. Not recommended for steam or steam-cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Fitting Reference Crimp Fitting Socket Data

Page 131 64

Factory crimp only.

For Complete Agency Listings See pages 346-348.

ADAPTERS & TUBE FITTINGS

2575 Low pressure SOCKETLESS™ Textile Braid

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Part Number

HOSE ASSEMBLY EQUIPMENT

2575-4 2575-6 2575-8 2575-10 2575-12

Hose I.D.

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

Construction Synthetic rubber tube, textile braid reinforcement, black synthetic rubber cover (only).

Operating Temperature Range –40°C to +100°C [–40°F to +212°F] APPENDICIES

Water not to exceed +66°C [+150°F] and air not to exceed +71°C [+160°F].

Hose O.D.

11,9 15,8 19,1 23,1 26,2

Maximum Operating Pressure

Minimum Burst Pressure

Minimum Bend Radius

bar

psi

bar

psi

0.47 0.62 0.75 0.91 1.03

17,0 17,0 17,0 14,0 14,0

250 250 250 200 200

70,0 1000 70,0 1000 70,0 1000 56,0 800 56,0 800

76,2 101,6 127,0 152,4 177,8

Application For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and not approved for airbrake applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Kg/m

lbs/ft

3.00 4.00 5.00 6.00 7.00

0,13 0,19 0,25 0,30 0,33

0.09 0.13 0.17 0.20 0.22

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Fitting Reference Reusable Fitting

Page 176

SPECIALTY & TRUCK HOSE

FC332 AQP Low pressure SOCKETLESS™ Textile Braid r

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

Construction AQP elastomer tube, textile braid reinforcement, AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

12,4 16,0 19,1 23,1 26,4

bar

0.49 0.63 0.75 0.91 1.04

17,0 17,0 17,0 17,0 17,0

psi

250 250 250 250 250

bar

psi

70,0 70,0 70,0 70,0 70,0

1000 1000 1000 1000 1000

76,2 76,2 127,0 152,4 177,8

Vacuum Service

kPa

3.00 3.00 5.00 6.00 7.00

94,8 94,8 94,8 60,9 60,9

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18

0,12 0,18 0,22 0,30 0,42

0.08 0.12 0.15 0.20 0.28

Fitting Reference Reusable Fitting

Page 176

HOSE FITTINGS

Air not to exceed +121°C [+250°F] and water not to exceed +82°C [+180°F].

Hose O.D.

Minimum Bend Radius

LOW & MEDIUM PRESSURE HOSE

FC332-04 FC332-06 FC332-08 FC332-10 FC332-12

Hose I.D.

Minimum Burst Pressure

HIGH PRESSURE HOSE

Part Number

Maximum Operating Pressure

ADAPTERS & TUBE FITTINGS

FC647 Low pressure SOCKETLESS™ Textile braid

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Fire resistant meets RMA/CGA flame test requirements

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

Construction Synthetic rubber tube, textile braid reinforcement, polyester braided cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F] Water not to exceed +66°C (+150°F), air not to exceed +74°C (+165°F).

Hose O.D.

13,2 16,8 20,1 23,4 26,7

bar

0.52 0.66 0.79 0.92 1.05

25,0 21,0 21,0 17,0 17,0

psi

360 300 300 250 250

bar

psi

99,0 84,0 84,0 70, 0 70,0

1440 1200 1200 1000 1000

Minimum Bend Radius

76,2 76,2 127,0 152,4 177,8

Vacuum Service

kPa

3.00 3.00 5.00 6.00 7.00

94,8 94,8 94,8 60,9 60,9

*NOTE: You must insert the correct color code in the complete part number. Color codes are BLK = black, BLU = blue, BRN = brown, GRN = green, WHT = white. Example: FC647-04GRN is a green cover in dash size 4. Not all sizes are available in all colors.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18

0,09 0,15 0,18 0,24 0,27

0.06 0.09 0.12 0.16 0.18

Fitting Reference Reusable Fitting

HOSE ASSEMBLY EQUIPMENT

FC647-04* FC647-06* FC647-08* FC647-10* FC647-12*

Hose I.D.

Minimum Burst Pressure

Page 176

APPENDICIES

Part Number

Maximum Operating Pressure

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

2556/2565 Low pressure SOCKETLESS™ Textile braid Meets performance requirements SAE 30R2 Type 1 r

LOW & MEDIUM PRESSURE HOSE

Part Number

Hose I.D.

Hose O.D.

Minimum Bend Radius

Weight of Hose

HIGH PRESSURE HOSE

bar

psi

kPa

in/Hg

Kg/m

lbs/ft

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

12,4 15,7 19,1 23,1 26,2

0.49 0.62 0.75 0.91 1.03

25,0 21,0 21,0 17,0 17,0

360 300 300 250 250

99,0 84,0 84,0 70,0 70,0

1440 1200 1200 1000 1000

76,2 76,2 127,0 152,4 177,8

3.00 3.00 5.00 6.00 7.00

94,8 94,8 94,8 61,0 61,0

28 28 28 18 18

0,12 0,18 0,24 0,31 0,37

0.08 0.12 0.16 0.21 0.25

2565-4 2565-6 2565-8 2565-10 2565-12

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

12,7 16,0 19,8 24,6 27,7

0.50 0.63 0.78 0.97 1.09

21,0 17,0 14,0 12,0 8,5

300 250 200 175 125

87,0 70,0 52,0 49,0 35,0

1250 1000 750 700 500

57,2 76,2 95,3 120,7 139,7

2.25 3.00 3.75 4.75 5.50

67,7 67,7 33,9 33,9 33,9

20 20 10 10 10

0,13 0,16 0,25 0,42 0,45

0.09 0.11 0.17 0.28 0.30

HOSE FITTINGS

2556: -40°C to +100°C [-40°F to +212°F]. Water not to exceed +66°C [+150°F], air not to exceed +160°C [+71°F]. 2565: -54°C to +121°C [-65°F to +250°F]. Water not to exceed +66°C [+150°F], air not to exceed +74°C [+165°F].

Vacuum Service

Operating Temperature Range

psi

Minimum Burst Pressure

2556-4 2556-6 2556-8 2556-10 2556-12

Construction Synthetic rubber tube, textile braid reinforcement, synthetic rubber cover.

Maximum Operating Pressure

For Complete Agency Listings See pages 346-348.

Fitting Reference Reusable Fitting

Page 176

2565 is a low-temperature synthetic rubber covered MIL-DTL13444 Type 1, Class A hose.

ADAPTERS & TUBE FITTINGS

FC619 Flexible 1/2 SAE bend Wire inserted suction

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Exceeds SAE 100R4 r Part Number

HOSE ASSEMBLY EQUIPMENT

FC619-12 FC619-16 FC619-20 FC619-24 FC619-32 FC619-40 FC619-48

Hose I.D.

19,1 25,4 31,8 38,1 50,8 63,5 76,2

0.75 1.00 1.25 1.50 2.00 2.50 3.00

APPENDICIES

Construction Synthetic rubber tube, reinforcement consisting of a helical wire between two textile reinforcement layers and synthetic rubber cover. Operating Temperature Range –40°C to +135°C [–40°F to +275°F]

Hose O.D.

30,7 37,6 44,5 51,8 64,8 79,2 95,3

Maximum Operating Pressure

bar

1.21 1.48 1.75 2.04 2.55 3.12 3.75

21,0 17,0 14,0 10,5 7,0 4,0 4,0

psi

300† 250† 200† 150† 100† 62 62

Application Suction and transfer applications for petroleum hydraulic fluids, fuel, lubricating oils, gasoline, water and many other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

psi

84,0 70,0 56,0 42,0 28,0 17,0 16,0

1200 1000 800 600 400 250 225

Minimum Bend Radius

63,5 2.50 76,2 3.00 102,0 4.00 127,0 5.00 152,4 6.00 355,6 14.00 457,2 18.00

† Maximum working pressure for band clamp type fittings is 3,4 bar [50 psi]. NOTE: -40 and -48 sizes require special tooling for crimp fittings. Contact Eaton for information. For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Vacuum Service

kPa

94,8 94,8 94,8 94,8 94,8 94,8 94,8

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 28 28 28 28

0,68 0,83 1,16 1,49 1,83 2,35 3,36

0.46 0.56 0.78 1.00 1.23 1.58 2.26

Fitting Reference Crimp OTC TTC -40, -48 Socket Data Reusable Nipple Clamps

Page 66 66 133 64 66 184

SPECIALTY & TRUCK HOSE

2661 AQP Wire inserted suction Exceeds SAE 100R4

19,1 25,4 31,8 38,1 50,8 63,5 76,2 101,6

0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00

Construction AQP elastomer tube, reinforcement consisting of a helical wire between two textile braids and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

31,8 38,1 45,7 52,3 64,8 78,2 90,9 119,1

bar

1.25 1.50 1.80 2.06 2.55 3.08 3.58 4.69

21,0 17,0 14,0 10,5 7,0 4,0 4,0 3,5

psi

300† 250† 200† 150† 100† 62 62 50

Application Suction and transfer applications for petroleum and fire resistant hydraulic fluids, fuel, lubricating oils, gasoline, water and many other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

psi

84,0 70,0 56,0 42,0 28,0 16,0 16,0 14,0

1200 1000 800 600 400 225 225 200

125,0 150,0 200,0 255,0 300,0 355,0 460,0 610,0

5.00 6.00 8.00 10.00 12.00 14.00 18.00 24.00

† Maximum working pressure for band clamp type fittings is 3,4 bar [50 psi]. ‡Sold as bulk hose only. For Complete Agency Listings See pages 346-348.

Vacuum Service

kPa

94,8 94,8 94,8 94,8 94,8 94,8 94,8 94,8

Weight of Hose

in/Hg

Kg/m

28 28 28 28 28 28 28 28

0,62 0,74 1,34 1,68 1,93 2,56 2,92 4,58

Fitting Reference Crimp OTC TTC -40, -48 Socket Data Reusable Nipple Clamps

LOW & MEDIUM PRESSURE HOSE

2661-12 2661-16 2661-20 2661-24 2661-32 2661-40 2661-48‡ 2661-64‡

Hose O.D.

Minimum Bend Radius

lbs/ft

0,42 0,50 0,90 1,13 1,30 1,72 1,96 3,08

HIGH PRESSURE HOSE

Hose I.D.

Minimum Burst Pressure

Page 66 66 133 64

HOSE FITTINGS

Part Number

Maximum Operating Pressure

66 184

ADAPTERS & TUBE FITTINGS

FC466 Textile braid Exceeds SAE 100R6 performance*

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

Construction Synthetic rubber tube, textile braid reinforcement and polyester braid cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F], Air not to exceed +71°C [+160°F].

Hose O.D.

12,2 15,7 19,1 23,1 26,2

bar

0.48 0.62 0.75 0.91 1.03

28,0 28,0 28,0 24,0 24,0

psi

400 400 400 350 350

Application For gasoline, fuel, lubricating oils, air and water. Not approved for airbrake applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

112,0 112,0 112,0 98,0 98,0

psi

1600 1600 1600 1400 1400

63,5 75,0 100,0 125,0 150,0

Vacuum Service

kPa

2.50 3.00 4.00 5.00 7.00

94,8 94,8 94,8 60,9 60,9

* All sizes except –12 For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18

0,09 0,15 0,19 0,27 0,28

0.06 0.10 0.13 0.18 0.19

Fitting Reference Crimp OTC Skive Nipple** Socket Data

HOSE ASSEMBLY EQUIPMENT

FC466-04 FC466-06 FC466-08 FC466-10 FC466-12

Hose I.D.

Minimum Bend Radius

Page 66 66 64

**No skiving required.

APPENDICIES

Part Number

Minimum Burst Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Maximum Operating Pressure

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

FC498 AQP Textile braid Exceeds SAE 100R6

r LOW & MEDIUM PRESSURE HOSE

Part Number

FC498-04 FC498-06 FC498-08 FC498-10 FC498-12

Hose I.D.

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

HIGH PRESSURE HOSE

Construction AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

12,7 15,7 19,1 23,1 26,2

Maximum Operating Pressure

bar

0.50 0.62 0.75 0.91 1.03

28,0 28,0 28,0 24,0 24,0

psi

400 400 400 350 350

Application Low pressure return lines in hydraulic systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

112,0 112,0 112,0 98,0 98,0

psi

1600 1600 1600 1400 1400

Minimum Bend Radius

63,5 75,0 100,0 125,0 150,0

Vacuum Service

kPa

2.50 3.00 4.00 5.00 6.00

94,8 94,8 94,8 60,9 60,9

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18

0,12 0,19 0,22 0,30 0,42

0.08 0.13 0.15 0.20 0.28

Fitting Reference Crimp OTC Skive Nipple** Socket Data

Page 66 66 64

**No skiving required.

HOSE FITTINGS

FC598 AQP Textile braid ADAPTERS & TUBE FITTINGS

Exceeds SAE 100R6

r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC598-04 FC598-06 FC598-08 FC598-10 FC598-12

Hose I.D.

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

HOSE ASSEMBLY EQUIPMENT

Construction AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

12,2 15,7 19,1 23,1 26,2

Maximum Operating Pressure

bar

0.50 0.62 0.78 0.91 1.03

28,0 28,0 28,0 24,0 24,0

psi

400 400 400 350 350

Application Low pressure return lines in hydraulic systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

112,0 112,0 112,0 98,0 98,0

psi

1600 1600 1600 1400 1400

Minimum Bend Radius

63,5 75,0 100,0 125,0 150,0

Vacuum Service

kPa

2.50 3.00 4.00 5.00 6.00

94,8 94,8 94,8 60,9 60,9

For Complete Agency Listings See pages 346-348.

Weight of Hose

in/Hg

Kg/m

lbs/ft

28 28 28 18 18

0,12 0,19 0,22 0,30 0,42

0.08 0.13 0.15 0.20 0.28

Fitting Reference Crimp OTC Skive Nipple** Socket Data

Page

**No skiving required.

APPENDICIES 36

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

66 66 64

SPECIALTY & TRUCK HOSE

2580 Double textile braid MIL-H-24136/3 r

4,8 6,4 7,9 10,4 12,7 16,0 22,4 28,5 45,7 46,0

0.19 0.25 0.31 0.41 0.50 0.63 0.88 1.12 1.38 1.81

Construction Synthetic rubber tube, double textile braid reinforcement and synthetic rubber cover. For larger dash sizes, see Catalog A-MM-MC-0001-E.

13,2 14,7 17,3 19,6 23,4 27,4 31,5 38,1 44,5 56,4

bar

psi

0.52 0.58 0.68 0.77 0.92 1.08 1.24 1.50 1.75 2.22

70,0 56,0 45,0 43,0 42,0 38,0 35,0 31,0 28,0 24,0

1000 800 650 625 600 550 500 450 400 350

Application For water, gasoline, and fuel oil. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

psi

280,0 224,0 180,0 175,0 168,0 152,0 140,0 124,0 112,0 98,0

4000 3200 2600 2500 2400 2200 2000 1800 1600 1400

76,2 85,9 101,6 117,3 139,7 165,1 187,5 228,6 266,7 336,6

Weight of Hose

Kg/m

lbs/ft

3.00 3.38 4.00 4.62 5.50 6.50 7.38 9.00 10.50 13.25

0,18 0,22 0,25 0,28 0,42 0,51 0,54 0,64 0,76 1,12

0.12 0.15 0.17 0.19 0.28 0.34 0.36 0.43 0.51 0.75

For Complete Agency Listings See pages 346-348.

Fitting Reference Reusable Fitting Socket Data

LOW & MEDIUM PRESSURE HOSE

Hose O.D.

Minimum Bend Radius

HIGH PRESSURE HOSE

2580-4 2580-5 2580-6 2580-8 2580-10 2580-12 2580-16 2580-20 2580-24 2580-32

Hose I.D.

Minimum Burst Pressure

Page 136 65

HOSE FITTINGS

Part Number

Maximum Operating Pressure

Operating Temperature Range –40°C to +100°C [–40°F to +212°F].

ADAPTERS & TUBE FITTINGS

2583 Double textile braid SAE 100R3

6,4 9,7 12,7 19,1 25,4 31,8

0.25 0.38 0.50 0.75 1.00 1.25

Construction Synthetic rubber tube, double textile braid reinforcement and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]. Air not to exceed +71°C [+161°F].

Hose O.D.

14,5 19,1 23,9 31,8 38,1 44,5

bar

psi

bar

psi

0.57 0.75 0.94 1.25 1.50 1.75

87,0 78,0 70,0 52,0 39,0 26,0

1250 1125 1000 750 565 375

350,0 315,0 280,0 210,0 157,0 105,0

5000 4500 4000 3000 2250 1500

Application For hydraulics, fuel, lubricating oils, gasoline, air and water. Not approved for airbrake applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

76,2 101,6 127,0 152,4 203,2 254,0

Weight of Hose

Kg/m

lbs/ft

3.00 4.00 5.00 6.00 8.00 10.00

0,18 0,33 0,39 0,71 0,76 1,09

0.12 0.22 0.26 0.48 0.51 0.73

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp OTC

HOSE ASSEMBLY EQUIPMENT

2583-4 2583-6 2583-8 2583-12 2583-16 2583-20

Hose I.D.

Minimum Bend Radius

Page 66

APPENDICIES

Part Number

Minimum Burst Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Maximum Operating Pressure

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

2681 HI-IMPULSE® Single wire braid Meets or exceeds: SAE 100R1A, EN853 1ST, ISO 1436-1 Type 1ST r

LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

2681-3 2681-4 2681-5 2681-6 2681-8 2681-10 2681-12 2681-16 2681-20 2681-24 2681-32

Hose I.D.

4,8 6,4 7,9 9,7 12,7 16,0 19,1 25,4 31,8 38,1 50,8

0.19 0.25 0.31 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00

HOSE FITTINGS

Construction Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

12,7 15,8 17,5 19,8 23,1 26,2 30,2 38,1 46,0 52,3 65,5

0.50 0.62 0.69 0.78 0.91 1.03 1.19 1.50 1.81 2.06 2.58

Maximum Operating Pressure

bar

psi

280,0 227,0 227,0 210,0 175,0 140,0 124,0 90,0 60,0 49,0 42,0

4000 3250 3250 3000 2500 2000 1800 1300 900 700 600

Application Hydraulic system service with petroleum and water-base fluids, for general industrial service. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

psi

1120,0 897,0 897,0 840,0 700,0 560,0 497,0 359,0 248,0 193,0 168,0

16000 13000 13000 12000 10000 8000 7200 5200 3600 2800 2400

88,9 100,0 115,0 125,0 180,0 200,0 240,0 300,0 420,0 500,0 630,0

ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Kg/m

lbs/ft

3.50 4.00 4.50 5.00 7.00 8.00 9.50 12.00 16.50 20.00 25.00

0,19 0,28 0,40 0,45 0,58 0,68 0,79 1,19 1,46 1,67 2,43

0.13 0.19 0.27 0.30 0.39 0.46 0.53 0.80 0.98 1.12 1.63

For Complete Agency Listings See pages 346-348.

ADAPTERS & TUBE FITTINGS 38

Minimum Bend Radius

Fitting Reference Crimp Skive Nipple Socket Data

Page 66 64

SPECIALTY & TRUCK HOSE

GH663 MATCHMATE Plus HI-IMPULSE Single wire braid

LOW & MEDIUM PRESSURE HOSE

Meets or exceeds: SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN r Hose O.D.

GH663-4

6,4

0.25

13,5

0.53

GH663-6

9,7

0.38

17,5

0.69

GH663-8

12,7

0.50

20,6

0.81

GH663-12

19,1

0.75

27,7

1.09

GH663-16 GH663-20 GH663-24 GH663-32

25,4 31,8 38,1 50,8

1.00 1.25 1.50 2.00

35,8 43,4 50,6 64,0

1.41 1.71 1.99 2.52

Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

psi

bar

psi

3250† 2750 3000† 2250 2500† 2000 1800† 1250 1300† 1000 950 725 580

897,0 770,0 840,0 630,0 700,0 560,0 497,0 350,0 359,0 280,0 260,0 200,0 160,0

13000† 11000 12000† 9000 10000† 8000 7200† 5000 5200† 4000 3770 2900 2320

Weight of Hose

Kg/m

lbs/ft

100,0

4.00

0,24

0.16

125,0

5.00

0,37

0.25

180,0

7.00

0,45

0.30

241,3

9.50

0,67

0.45

304,8 419,1 508,0 635,0

12.00 16.50 20.00 25.00

1,01 1,31 1,56 1,95

0.68 0.88 1.05 1.31

† Improved performance when used with Global Crimp fittings.

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple Socket Data Reusable Fitting Socket Data

Page 66 66 64 148 65

ADAPTERS & TUBE FITTINGS

Construction Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover.

bar

227,0 192,0 210,0 157,0 175,0 140,0 124,0 87,0 90,0 70,0 66,0 50,0 40,0

Minimum Bend Radius

HIGH PRESSURE HOSE

Hose I.D.

Minimum Burst Pressure

HOSE FITTINGS

Part Number

Maximum Operating Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

GH194 AQP MATCHMATE BLUE HI-IMPULSE Single wire braid Meets or exceeds: SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN r

6,4 9,7 12,7 16,0 19,1 25,4 31,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25

Construction AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +300°F].

Hose O.D.

13,5 17,5 20,6 23,9 27,7 35,8 43,9

0.53 0.69 0.81 0.94 1.09 1.41 1.73

bar

psi

227,0 210,0 175,0 140,0 124,0 90,0 62,0

3250 3000 2500 2000 1800 1300 900

Application Petroleum and fire-resistant hydraulic fluids, fuel and lubricating oils, gasoline, water and other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

Minimum Bend Radius

psi

897,0 13000 840,0 12000 700,0 10000 560,0 8000 497,0 7200 359,0 5200 248,0 3600

100,0 125,0 180,0 205,0 240,0 300,0 420,0

Weight of Hose

Kg/m

lbs/ft

4.00 5.00 7.00 8.00 9.50 12.00 16.50

0,25 0,37 0,45 0,54 0,68 0,98 1,26

0.17 0.25 0.30 0.36 0.46 0.66 0.85

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple Socket Data

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

HOSE ASSEMBLY EQUIPMENT

GH194-4 GH194-6 GH194-8 GH194-10 GH194-12 GH194-16 GH194-20

Hose I.D.

Minimum Burst Pressure

Page APPENDICIES

Part Number

Maximum Operating Pressure

66 66 64

SPECIALTY & TRUCK HOSE

FC194 AQP HI-IMPULSE Single wire braid Meets or exceeds: SAE 100R1A, EN853 1ST, ISO 1436-1 Type 1ST r

LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

FC194-04 FC194-06 FC194-08 FC194-10 FC194-12 FC194-16 FC194-20

Hose I.D.

6,4 9,7 12,7 16,0 19,1 25,4 31,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25

Construction AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

16,0 19,8 22,9 26,2 30,2 38,1 46,0

Maximum Operating Pressure

bar

psi

0.63 0.78 0.90 1.03 1.19 1.50 1.81

227,0 210,0 175,0 140,0 124,0 90,0 62,0

3250 3000 2500 2000 1800 1300 900

HOSE FITTINGS

Application Petroleum and fire-resistant hydraulic fluids, fuel, lubricating oils, gasoline, water, and other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

Minimum Bend Radius

psi

897,0 13000 840,0 12000 700,0 10000 560,0 8000 497,0 7200 359,0 5200 248,0 3600

100,0 125,0 180,0 200,0 240,0 300,0 420,0

Weight of Hose

Kg/m

lbs/ft

4.00 5.00 7.00 8.00 9.50 12.00 16.50

0,28 0,45 0,58 0,68 0,79 1,19 1,46

0.19 0.30 0.39 0.46 0.53 0.80 0.98

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Skive Nipple Socket Data

Page 66 64

ADAPTERS & TUBE FITTINGS

FC611 EPDM hose Single wire braid

ACCESSORIES & ASSEMBLY INSTRUCTIONS

r Part Number

HOSE ASSEMBLY EQUIPMENT

FC611-04 FC611-06 FC611-08 FC611-12 FC611-16 FC611-20 FC611-24 FC611-32

Hose I.D.

6,4 9,7 12,7 19,1 25,4 31,8 38,1 50,8

0.25 0.38 0.50 0.75 1.00 1.25 1.50 2.00

Construction Synthetic EPDM tube, single wire braid reinforcement and green EPDM synthetic cover. Operating Temperature Range –40°C to +75°C [–40°F to +175°F]

APPENDICIES 40

Hose O.D.

13,5 17,3 20,3 27,9 35,8 43,4 50,5 64,0

0.53 0.68 0.80 1.10 1.41 1.71 1.99 2.52

Maximum Operating Pressure

bar

psi

210,0 157,0 140,0 87,0 70,0 43,0 35,0 26,0

3000 2250 2000 1250 1000 625 500 375

Application Ground support equipment (GSE), industrial phosphate esterbased fluids, water glycol systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

Minimum Bend Radius

psi

840,0 12000 630,0 9000 560,0 8000 350,0 5000 280,0 4000 175,0 2500 140,0 2000 105,0 1500

101,6 127,0 177,8 241,3 304,8 419,1 508,0 635,0

Kg/m

lbs/ft

4.00 5.00 7.00 9.50 12.00 16.50 20.00 25.00

0,24 0,33 0,42 0,64 0,89 1,19 1,52 1,90

0.16 0.22 0.28 0.43 0.60 0.80 1.02 1.28

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Fitting Reference Crimp TTC

Page 66

SPECIALTY & TRUCK HOSE

FC310 Hi-Pac wire braid SAE 100R16 performance

Hose O.D.

bar

psi

bar

psi

FC310-04

6,4

0.25

14,0

0.55

350,0

5000.00

1400,0

20000

FC310-06

9,7

0.38

17,3

0.68

280,0

4000.00

1120,0

16000

FC310-08

12,7

0.50

20,1

0.79

245,0

3500.00

980,0

14000

FC310-10

16,0

0.63

23,6

0.93

192,0

2750.00

770,0

11000

FC310-12

19,1

0.75

27,4

1.08

157,0

2250.00

630,0

9000

FC310-16

25,4

1.00

34,6

1.36

140,0

2000.00

560,0

8000

FC310-20

31,8

1.25

42,9

1.69

113,0

1625.00

455,0

6500

Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Application Hydraulic system service with petroleum and water-base fluids, for general industrial service. For more specific information on fluid applications, see pages 349-355.

2.00† 3.00 2.50† 3.50 3.50† 5.00 4.00† 6.00 4.75† 7.00 6.00† 9.00 8.25† 11.00

† Improved minimum bend radius when used with global fittings. For Complete Agency Listings See pages 346-348.

Kg/m

lbs/ft

0,31

0.21

0,40

0.27

0,51

0.34

0,65

0.44

0,74

0.50

1,06

0.71

1,58

1.06

Fitting Reference Crimp TTC Skive Nipple Socket Data Reusable Fitting Socket Data

Page 66 66 64 151 65

ADAPTERS & TUBE FITTINGS

Construction Synthetic rubber tube, HI-PAC braided wire reinforcement, synthetic rubber cover.

50,8 76,2 63,5 88,9 88,9 127,0 101,6 152,4 120,7 177,8 152,4 228,6 209,6 279,4

Weight of Hose

HIGH PRESSURE HOSE

Hose I.D.

Minimum Bend Radius

HOSE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC510 AQP Hi-Pac wire braid

6,4 9,7 12,7 16,0 19,1 25,4 31,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25

Construction AQP elastomer tube, Hi-Pac braided wire reinforcement and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

14,5 17,5 20,3 23,6 27,7 34,8 43,2

bar

psi

bar

0.57 0.69 0.80 0.93 1.09 1.37 1.70

350,0 280,0 245,0 192,0 157,0 140,0 113,0

5000 4000 3500 2750 2250 2000 1625

1400,0 1120,0 980,0 770,0 630,0 560,0 455,0

Application Petroleum and fire-resistant hydraulic fluids, fuel, and lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages 346-348.

psi

20000 16000 14000 11000 9000 8000 6500

Minimum Bend Radius

76,2 88,9 127,0 152,4 177,8 228,6 279,4

Weight of Hose

Kg/m

lbs/ft

3.00 3.50 5.00 6.00 7.00 9.00 11.00

0,34 0,43 0,51 0,65 0,77 1,06 1,61

0.23 0.29 0.34 0.44 0.52 0.71 1.08

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple Socket Data Reusable Fitting Socket Data

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

HOSE ASSEMBLY EQUIPMENT

FC510-04 FC510-06 FC510-08 FC510-10 FC510-12 FC510-16 FC510-20

Hose I.D.

Minimum Burst Pressure

Page 66 66 64

APPENDICIES

Part Number

Maximum Operating Pressure

151 65

SPECIALTY & TRUCK HOSE

FC639 Flexible cover 3000 PSI Constant pressure SAE 100R17

LOW & MEDIUM PRESSURE HOSE

r Part Number

HIGH PRESSURE HOSE

FC639-04 FC639-06 FC639-08 FC639-10** FC639-12** FC639-16**

Hose I.D.

6,4 9,7 12,7 16,0 19,1 25,4

0.25 0.38 0.50 0.63 0.75 1.00

Construction Synthetic rubber tube with one or two wire braid reinforcements, ozone flexible neoprene rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

13,2 17,0 20,6 25,4 29,0 36,3

0.52 0.67 0.81 1.00 1.14 1.43

Maximum Operating Pressure

bar

psi

210,0 210,0 210,0 210,0 210,0 210,0

3000 3000 3000 3000 3000 3000

HOSE FITTINGS

Application General industrial and hydraulic system service with petroleum and water-base fluids. Recommended for high-pressure oil lines used on construction equipment and other off-highway applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

psi

840,0 840,0 840,0 840,0 840,0 840,0

12000 12000 12000 12000 12000 12000

Minimum Bend Radius

50,8 63,5 88,9 101,6 120,7 152,4

Weight of Hose

Kg/m

lbs/ft

2.00 2.50 3.50 4.00 4.75 6.00

0,22 0,34 0,48 0,76 0,94 1,24

0.15 0.23 0.32 0.51 0.63 0.83

For Complete Agency Listings See pages 346-348.

**Two braids of high tensile wire.

Fitting Reference Crimp TTC Skive Nipple Socket Data

Page 66 66 64

ADAPTERS & TUBE FITTINGS

GH681 3000 PSI Constant pressure Single wire braid

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Exceeds EN 853 Type 1

r Part Number

HOSE ASSEMBLY EQUIPMENT

GH681-4 GH681-6 GH681-8

Hose I.D.

6,4 9,7 12,7

0.25 0.38 0.50

Construction Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover. Meets or exceeds EN requirements at 1/2 SAE Bend Radius. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

11,9 16,0 19,8

Maximum Operating Pressure

bar

psi

0.47 0.63 0.78

225,0 210,0 210,0

3250 3000 3000

Minimum Burst Pressure

bar

psi

900,0 13050 840,0 12000 840,0 12000

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Kg/m

lbs/ft

50,8 63,5 88,9

2.00 2.50 3.50

0,16 0,28 0,39

0.11 0.18 0.26

For Complete Agency Listings See pages 346-348.

APPENDICIES 42

Minimum Bend Radius

Fitting Reference Crimp TTC (-6 only) Skive Nipple Socket Data

Page 66 66 64

SPECIALTY & TRUCK HOSE

FC839B BRUISER Ultra-abrasion resistant cover 3000 PSI Constant pressure SAE 100R17

6,4 9,7 12,7 16,0 19,1 25,4

0.25 0.38 0.50 0.63 0.75 1.00

Construction Synthetic rubber tube with one or two layers of braided wire reinforcement, synthetic rubber intermediate cover and BRUISER outer cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

13,2 17,0 20,6 25,4 29,0 36,3

bar

psi

0.52 0.67 0.81 1.00 1.14 1.43

210,0 210,0 210,0 210,0 210,0 210,0

3000 3000 3000 3000 3000 3000

Application High abrasion industrial and hydraulic system applications with petroleum and water-based fluids. Recommended for use on critcal applications in construction, forestry, and other off-highway vehicles. BRUISER outer cover offers unmatched abrasion, chemical, and environmental protection. For more information on specific fluid applications and temperature ratings, see pages 349-355.

bar

psi

840,0 840,0 840,0 840,0 840,0 840,0

12000 12000 12000 12000 12000 12000

50,8 63,5 88,9 101,6 120,7 152,4

Weight of Hose

Kg/m

lbs/ft

2.00 2.50 3.50 4.00 4.75 6.00

0,22 0,34 0,48 0,76 0,94 1,24

0.15 0.23 0.32 0.51 0.63 0.83

For Complete Agency Listings See pages 346-348.

**Two braids of high tensile wire.

Fitting Reference Crimp TTC Skive Nipple Socket Data

HIGH PRESSURE HOSE

Hose O.D.

Page 66 66 64

HOSE FITTINGS

FC839B-04 FC839B-06 FC839B-08 FC839B-10** FC839B-12** FC839B-16**

Hose I.D.

Minimum Bend Radius

ADAPTERS & TUBE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC849 4000 PSI Constant pressure

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

Construction Synthetic rubber tube with two layers of wire braid reinforcement and abrasion resistance synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

15,2 19,3 22,6 25,7 30,0

bar

psi

0.60 0.76 0.89 1.01 1.18

280,0 280,0 280,0 280,0 280,0

4000 4000 4000 4000 4000

Application Industrial and hydraulic system applications with petroleum and water-based fluids. Recommended for use on construction, forestry, and other off-highway vehicles. For more information on specific fluid applications and temperature ratings, see pages 349-355.

bar

psi

1120,0 1120,0 1120,0 1120,0 1120,0

16000 16000 16000 16000 16000

Minimum Bend Radius

50,8 63,5 88,9 101,6 120,7

Weight of Hose

Kg/m

lbs/ft

2.00 2.50 3.50 4.00 4.75

0,36 0,54 0,64 0,90 1,07

0.24 0.36 0.43 0.60 0.72

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple * Socket Data

HOSE ASSEMBLY EQUIPMENT

FC849-04 FC849-06 FC849-08 FC849-10 FC849-12

Hose I.D.

Minimum Burst Pressure

Page 66 66 64

*-06 thru -12 only

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

Part Number

Maximum Operating Pressure

SPECIALTY & TRUCK HOSE

FC849B BRUISER Ultra-abrasion resistant cover 4000 PSI Constant Pressure r

LOW & MEDIUM PRESSURE HOSE

Part Number

FC849B-04 FC849B-06 FC849B-08 FC849B-10 FC849B-12

Hose I.D.

6,4 9,7 12,7 16,0 19,1

0.25 0.38 0.50 0.63 0.75

HIGH PRESSURE HOSE

Construction Synthetic rubber tube with two layers of wire braid reinforcement, synthetic rubber intermediate cover and BRUISER outer cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

15,2 19,3 22,6 25,7 30,0

Maximum Operating Pressure

bar

psi

0.60 0.76 0.89 1.01 1.18

280,0 280,0 280,0 280,0 280,0

4000 4000 4000 4000 4000

HOSE FITTINGS

Minimum Burst Pressure

bar

psi

1120,0 1120,0 1120,0 1120,0 1120,0

16000 16000 16000 16000 16000

50,8 63,5 88,9 101,6 120,7

ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Kg/m

lbs/ft

2.00 2.50 3.50 4.00 4.75

0,36 0,54 0,64 0,90 1,07

0.24 0.36 0.43 0.60 0.72

For Complete Agency Listings See pages 346-348.

ADAPTERS & TUBE FITTINGS 44

Minimum Bend Radius

Fitting Reference Crimp TTC Skive Nipple* Socket Data *-06 thru -12 only

Page 66 66 64

SPECIALTY & TRUCK HOSE

GH120 MATCHMATE ICE Cold temperature applications SAE 100R16 performance

6,4 9,7 12,7 16,0 19,1 25,4 31,8 38,1 50,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00

Construction Aeroquip brand exclusive low temperature compound tube and cover, double wire braid reinforcement. Operating Temperature Range –57°C to +100°C [–70°F to +212°F]

14,2 17,3 20,8 24,9 28,4 35,8 43,4 51,6 63,8

Weight of Hose

bar

psi

bar

psi

Kg/m

lbs/ft

0.56 0.68 0.82 0.98 1.12 1.41 1.71 2.03 2.51

350,0 280,0 245,0 192,0 157,0 140,0 113,0 87,0 78,0

5000 4000 3500 2750 2250 2000 1625 1250 1125

1400,0 1120,0 980,0 770,0 630,0 560,0 455,0 350,0 315,0

20000 16000 14000 11000 9000 8000 6500 5000 4500

50,8 63,5 88,9 101,6 120,7 152,4 209,6 254,0 317,5

2.00 2.50 3.50 4.00 4.75 6.00 8.25 10.00 12.50

0,30 0,40 0,58 0,74 0,92 1,22 1,60 2,11 2,80

0.20 0.27 0.39 0.50 0.62 0.82 1.07 1.42 1.88

Application Low temperature flexing and hydraulic system service with petroleum and water-base fluids. For use in frigid environments on construction equipment and other mobile applications. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple * Socket Data

HIGH PRESSURE HOSE

Hose O.D.

Page 66 66 64

HOSE FITTINGS

GH120-4 GH120-6 GH120-8 GH120-10 GH120-12 GH120-16 GH120-20 GH120-24 GH120-32

Hose I.D.

Minimum Bend Radius

*-04 thru -20 only

ADAPTERS & TUBE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

2766 Double wire braid

ACCESSORIES & ASSEMBLY INSTRUCTIONS

MIL-DTL-13531, Type II, Class A

r Hose O.D.

in.

bar

psi

6,4 9,7 12,7 19,1 25,4 31,8 38,1 50,8

0.25 0.38 0.50 0.75 1.00 1.25 1.50 2.00

17,5 21,3 24,6 31,8 39,6 50,8 57,2 69,9

0.69 0.84 0.97 1.25 1.56 2.00 2.25 2.75

350,0 280,0 245,0 157,0 140,0 113,0 87,0 78,0

5000 4000 3500 2250 2000 1625 1250 1000

Construction Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Operating Temperature Range –54°C to +93°C [–65°F to +200°F]

Application High pressure hydraulics, fuel and lubricating oil and gasoline. For more information specific fluid applications and high temperature ratings, see pages 349-355.

bar

psi

1400,0 20000 1120,0 16000 980,0 14000 630,0 9000 560,0 8000 455,0 6500 350,0 5000 315,0 4500

Minimum Bend Radius

101,6 127,0 177,8 241,3 279,4 406,4 508,0 558,8

Weight of Hose

in.

Kg/m

lbs/ft

4.00 5.00 7.00 9.50 11.00 16.00 20.00 22.00

0,47 0,68 0,80 1,11 1,51 2,41 2,42 3,97

0.32 0.46 0.54 0.75 1.02 1.63 1.64 2.69

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Skive Nipple Socket Data Reusable Fitting Socket Data

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

HOSE ASSEMBLY EQUIPMENT

2766-4 2766-6 2766-8 2766-12 2766-16 2766-20 2766-24 2766-32

Hose I.D.

Minimum Burst Pressure

Page 66 64 APPENDICIES

Part Number

Maximum Operating Pressure

156 65

SPECIALTY & TRUCK HOSE

FC693 EPDM hose Double wire braided high pressure

r LOW & MEDIUM PRESSURE HOSE

Part Number

FC693-04 FC693-06 FC693-08

Hose I.D.

6,4 9,7 12,7

0.25 0.38 0.50

HIGH PRESSURE HOSE

Construction Synthetic EPDM tube, double wire braid reinforcement and green EPDM synthetic cover. Operating Temperature Range –40°C to +75°C [–40°F to +175°F]

Maximum Operating Pressure

Hose O.D.

15,2 19,1 22,1

bar

psi

0.60 0.75 0.87

350,0 280,0 245,0

5000 4000 3500

Minimum Burst Pressure

bar

psi

1400,0 1120,0 980,0

20000 16000 14000

Minimum Bend Radius

101,6 127,0 177,8

Weight of Hose

Kg/m

lbs/ft

4.00 5.00 7.00

0,37 0,54 0,60

0.25 0.36 0.40

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC

Page 66

HOSE FITTINGS

FC735 BRUISER Ultra-abrasion resistant cover Hi-Impulse Double wire braid

ADAPTERS & TUBE FITTINGS

Meets or exceeds: SAE 100R16 Type S, EN 857 2SC, ISO 11237-1 Type 2SC r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC735-04* FC735-06 FC735-08 FC735-10 FC735-12 FC735-16 FC735-20

Hose I.D.

6,4 9,7 12,7 16,0 19,1 25,4 31,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25

HOSE ASSEMBLY EQUIPMENT

Construction Synthetic rubber tube, double wire braid reinforcement, synthetic rubber intermediate cover, and BRUISER outer cover. Meets or exceeds EN requirements at 1/2 SAE bend radius. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

13,5 17,5 20,6 23,6 27,9 36,1 43,2

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

0.53 0.69 0.81 0.93 1.10 1.42 1.70

350,0 350,0 297,0 250,0 216,0 175,0 157,0

5000* 5000 4250 3625 3125 2500 2250

1400,0 1400,0 1190,0 1000,0 870,0 700,0 630,0

20000* 20000 17000 14500 12500 10000 9000

Application High abrasion applications. Hydraulic system service with petroleum and water-base fluids, for general industrial service. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

50,8 63,5 88,9 101,6 120,7 152,4 209,6

Kg/m

lbs/ft

0,33 0,43 0,58 0,65 0,79 1,07 1,62

0.22 0.29 0.39 0.44 0.53 0.72 1.09

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

2.00 2.50 3.50 4.00 4.75 6.00 8.25

*Meets SAE100R2 pressures.

APPENDICIES 46

Minimum Bend Radius

Fitting Reference Crimp TTC Skive Nipple Socket Data

Page 66 66 64

SPECIALTY & TRUCK HOSE

2781 HI-IMPULSE Double wire braid Meets or exceeds: SAE 100R2A, EN853 2ST, ISO 1436-1 Type 2ST r

2781-4

6,4

0.25

17,5

0.69

2781-6

9,7

0.38

21,3

0.84

2781-8

12,7

0.50

24,6

0.97

2781-10

16,0

0.63

27,7

1.09

2781-12

19,1

0.75

31,8

1.25

2781-16

25,4

1.00

39,6

1.56

2781-20

31,8

1.25

50,8

2.00

2781-24

38,1

1.50

57,2

2.25

2781-32

50,8

2.00

69,9

2.75

Construction Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

bar

400,0 350,0 350,0 280,0 297,0 245,0 250,0 227,0 216,0 210,0 175,0 140,0 157,0 113,0 124,0 122,0 105,0 87,0

psi

5800† 5000 5000† 4000 4250† 3500 3625† 3250 3125† 3000 2500† 2000 2250† 1625 1800† 1750 1500† 1250

bar

1600,0 1400 1400,0 1120,0 1190,0 980,0 1000,0 770,0 870,0 630,0 700,0 560,0 630,0 455,0 497,0 350,0 420,0 315,0

psi

23200† 20000 20000† 16000 17000† 14000 14500† 11000 12500† 9000 10000† 8000 9000† 6500 7200† 5000 6000† 4500

Kg/m

lbs/ft

101,6

4.00

0,50

0.33

127,0

5.00

0,67

0.45

177,8

7.00

0,83

0.56

203,2

8.00

0,97

0.62

241,3

9.50

1,19

0.80

304,8

12.00

1,58

1.06

419,1

16.50

2,57

1.73

508,0

20.00

3,05

2.05

635,0

25.00

4,02

2.70

For Complete Agency Listings See pages 346-348.

†Improved pressure performance when used with global fittings.

Fitting Reference Crimp Skive Nipple Socket Data Reusable Fitting Socket Data

LOW & MEDIUM PRESSURE HOSE

Weight of Hose

HIGH PRESSURE HOSE

Hose O.D.

Minimum Bend Radius

HOSE FITTINGS

Hose I.D.

Minimum Burst Pressure

Page 66 64 156 65

ADAPTERS & TUBE FITTINGS

Part Number

Maximum Operating Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

GH781 MATCHMATE Plus HI-IMPULSE Double wire braid Meets or exceeds: SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC r

6,4 9,7 12,7 16,0 19,1 25,4 31,8 38,1 50,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00

Construction Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Meets or exceeds EN requirements at 1/2 SAE Bend Radius. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

13,5 17,5 20,6 23,6 27,9 36,1 41,9 51,6 64,3

bar

0.53 0.69 0.81 0.93 1.10 1.42 1.65 2.03 2.53

400,0 350,0 297,0 250,0 216,0 175,0 157,0 124,0 90,0

psi

5800 5000 4250 3625 3125 2500 2250 1800 1300

bar

1600,0 1400,0 1190,0 1000,0 870,0 700,0 630,0 497,0 359,0

psi

23200 20000 17000 14500 12500 10000 9000 7200 5200

Minimum Bend Radius

50,8 63,5 88,9 101,6 120,7 152,4 209,6 254,0 317,5

2.00 2.50 3.50 4.00 4.75 6.00 8.25 10.00 12.50

For Complete Agency Listings See pages 346-348.

Weight of Hose

Kg/m

lbs/ft

0,33 0,43 0,58 0,65 0,79 1,07 1,62 2,08 2,83

0.22 0.29 0.39 0.44 0.53 0.72 1.09 1.40 1.90

Fitting Reference Crimp TTC Skive Nipple * Socket Data

HOSE ASSEMBLY EQUIPMENT

GH781-4 GH781-6 GH781-8 GH781-10 GH781-12 GH781-16 GH781-20 GH781-24 GH781-32

Hose I.D.

Minimum Burst Pressure

APPENDICIES

Part Number

Maximum Operating Pressure

Page 66 66 64

*-04 thru -20 only

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

GH793 MATCHMATE Plus HI-IMPULSE Double wire braid Meets or exceeds: SAE 100R2AT Type S, EN853 2SN, ISO 1436-1 Type 2SN

LOW & MEDIUM PRESSURE HOSE

r Part Number

Hose I.D.

Hose O.D.

HIGH PRESSURE HOSE HOSE FITTINGS

GH793-4

6,4

0.25

15,2

0.60

GH793-6

9,7

0.38

19,1

0.75

GH793-8

12,7

0.50

22,1

0.87

GH793-10

16,0

0.63

24,9

0.98

GH793-12

19,1

0.75

29,5

1.16

GH793-16 GH793-20 GH793-24 GH793-32

25,4 31,8 38,1 50,8

1.00 1.25 1.50 2.00

38,1 48,8 54,6 63,8

1.50 1.92 2.15 2.51

Construction Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Maximum Operating Pressure

bar

psi

400,0 350,0 350,0 280,0 297,0 245,0 250,0 192,0 216,0 157,0 175,0 140,0 157,0 124,0 90,0

5800† 5000 5000† 4000 4250† 3500 3625† 2750 3125† 2250 2500† 2000 2250 1800 1300

Minimum Burst Pressure

bar

1600,0 1400,0 1400,0 1120,0 1190,0 980,0 1000,0 770,0 870,0 630,0 700,0 560,0 630,0 497,0 359,0

psi

23200† 20000 20000† 16000 17000† 14000 14500† 11000 12500† 9000 10000† 8000 9000 7200 5200

Minimum Bend Radius

Weight of Hose

Kg/m

lbs/ft

101,6

4.00

0,39

0.26

127,0

5.00

0,57

0.38

177,8

7.00

0,68

0.46

203,2

8.00

0,80

0.54

241,3

9.50

0,98

0.66

304,8 419,1 508,0 635,0

12.00 16.50 20.00 25.00

1,50 2,29 2,50 3,30

1.01 1.54 1.68 2.22

For Complete Agency Listings See pages 346-348.

†Improved pressure performance when used with global fittings.

ADAPTERS & TUBE FITTINGS

Fitting Reference Crimp TTC Skive Nipple Socket Data Reusable Fitting Socket Data

Page 66 66 64 165 65

ACCESSORIES & ASSEMBLY INSTRUCTIONS

GH195 AQP MATCHMATE BLUE HI-IMPULSE Double wire braid Meets or exceeds: SAE 100R2AT Type S, EN853 2SN ISO 1436-1 Type 2SN r Part Number

HOSE ASSEMBLY EQUIPMENT

GH195-4 GH195-6 GH195-8 GH195-10 GH195-12 GH195-16 GH195-20 GH195-24 GH195-32

Hose I.D.

6,4 9,7 12,7 16,0 19,1 25,4 31,8 38,1 50,8

0.25 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00

APPENDICIES

Construction AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F] 48

Hose O.D.

15,2 19,1 22,1 25,2 29,5 37,9 48,8 54,6 67,8

Maximum Operating Pressure

bar

psi

0.60 0.75 0.87 0.99 1.16 1.49 1.92 2.15 2.67

400,0 350,0 297,0 227,0 210,0 175,0 157,0 122,0 105,0

5800 5000 4250 3250 3000 2500 2250 1750 1500

Application Petroleum and fire resistant hydraulic fluids, fuel and lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

psi

1600,0 1400,0 1190,0 897,0 840,0 700,0 630,0 490,0 420,0

23200 20000 17000 13000 12000 10000 9000 7000 6000

Minimum Bend Radius

101,6 127,0 177,8 203,2 241,3 304,8 419,1 508,0 635,0

Kg/m

lbs/ft

4.00 5.00 7.00 8.00 9.50 12.00 16.50 20.00 25.00

0,40 0,60 0,68 0,80 1,00 1,44 2,39 2,60 3,38

0.27 0.39 0.46 0.54 0.67 0.97 1.60 1.74 2.27

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Fitting Reference Crimp TTC Skive Nipple Socket Data

Page 66 66 64

SPECIALTY & TRUCK HOSE

FC195 AQP HI-IMPULSE Double wire braid

LOW & MEDIUM PRESSURE HOSE

Meets or exceeds: SAE 100R2A, EN853 2ST, ISO 1436-1 Type 2ST

FC195-04

6,4

0.25

17,5

0.69

FC195-06

9,7

0.38

21,3

0.84

FC195-08

12,7

0.50

24,6

0.97

FC195-10

16,0

0.63

27,7

1.09

FC195-12

19,1

0.75

31,8

1.25

FC195-16

25,4

1.00

39,6

1.56

FC195-20

31,8

1.25

50,8

2.00

FC195-24

38,1

1.50

57,2

2.25

FC195-32

50,8

2.00

69,9

2.75

Construction AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

bar

psi

bar

psi

400,0 350,0 350,0 280,0 297,0 245,0 227,0 192,0 216,0 210,0 175,0 140,0 157,0 113,0 124,0 122,0 105,0 87,0

5800† 5000 5000† 4000 4250† 3500 3250† 2750 3125† 3000 2500† 2000 2250† 1625 1800† 1750 1500† 1250

1600,0 1400,0 1400,0 1120,0 1190,0 980,0 1000,0 770,0 870,0 630,0 700,0 560,0 630,0 455,0 497,0 350,0 420,0 315,0

23200† 20000 20000† 16000 17000† 14000 14500† 11000 12500† 9000 10000† 8000 9000† 6500 7200† 5000 6000† 4500

Application Petroleum and fire resistant hydraulic fluids, fuel, and lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Weight of Hose

Kg/m

lbs/ft

101,6

4.00

0,46

0.31

127,0

5.00

0,62

0.42

177,8

7.00

0,76

0.51

203,2

8.00

0,88

0.59

241,3

9.50

1,12

0.75

304,8

12.00

1,55

1.04

419,1

16.50

2,50

1.68

508,0

20.00

2,84

1.91

635,0

25.00

3,56

2.39

For Complete Agency Listings See pages 346-348.

† Improved pressure performance when used with global crimp fittings.

Fitting Reference Crimp Skive Nipple Socket Data Reusable Fitting Socket Data

HIGH PRESSURE HOSE

Hose O.D.

Minimum Bend Radius

HOSE FITTINGS

Hose I.D.

Minimum Burst Pressure

Page 66 64

ADAPTERS & TUBE FITTINGS

Part Number

Maximum Operating Pressure

156 65

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC636 EPDM hose Four spiral wire r

19,1 25,4 31,8 38,1

0.75 1.00 1.25 1.50

Construction Synthetic EPDM tube, 4-spiral wire reinforcement, and green EPDM synthetic cover. Operating Temperature Range –40°C to +75°C (–40°F to +175°F).

Hose O.D.

30,5 37,6 46,5 53,6

bar

psi

bar

psi

1.20 1.48 1.83 2.12

280,0 280,0 210,0 175,0

4000 4000 3000 2500

1120,0 1120,0 840,0 700,0

16000 16000 12000 10000

Application Ground support equipment (GSE), industrial phosphate ester based fluids, water glycol systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

241,3 304,8 419,1 508,0

Weight of Hose

Kg/m

lbs/ft

9.50 12.00 16.50 20.00

1,31 1,74 2,31 2,90

0.88 1.17 1.55 1.96

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC12

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

HOSE ASSEMBLY EQUIPMENT

FC636-12 FC636-16 FC636-20 FC636-24

Hose I.D.

Minimum Burst Pressure

Page 66 APPENDICIES

Part Number

Maximum Operating Pressure

SPECIALTY & TRUCK HOSE

FC323 AQP High temperature Four spiral wire

r LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

FC323-12 FC323-16 FC323-20 FC323-24 FC323-32

Hose I.D.

19,1 25,4 31,8 38,1 50,8

0.75 1.00 1.25 1.50 2.00

Construction AQP elastomer tube, 4-spiral wire reinforcement and a blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

30,5 37,6 47,2 53,6 66,8

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

1.20 1.48 1.86 2.11 2.63

210,0 210,0 210,0 210,0 210,0

3000 3000 3000 3000 3000

840,0 840,0 840,0 840,0 840,0

12000 12000 12000 12000 12000

Application Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Bend Radius

241,3 304,8 419,1 508,0 635,0

Weight of Hose

Kg/m

lbs/ft

9.50 12.00 16.50 20.00 25.00

1,40 1,82 2,53 3,27 4,78

0.94 1.22 1.70 2.20 3.21

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Single Skive* Internal Skive Socket Data * -12 thru -24 only

Page 106 118 64

HOSE FITTINGS ADAPTERS & TUBE FITTINGS

FC324 AQP High temperature Four spiral wire r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC324-08 FC324-12 FC324-16

Hose I.D.

12,7 19,1 25,4

0.50 0.75 1.00

Construction AQP elastomer tube, 4-spiral wire reinforcement and a blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

23,1 30,5 37,6

Maximum Operating Pressure

bar

0.91 1.20 1.48

280,0 280,0 280,0

psi

4000 4000 4000

HOSE ASSEMBLY EQUIPMENT

Minimum Burst Pressure

bar

psi

1120,0 1120,0 1120,0

16000 16000 16000

177,8 241,3 304,8

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

Kg/m

lbs/ft

7.00 9.50 12.00

0,91 1,47 1,92

0.61 0.99 1.29

For Complete Agency Listings See pages 346-348.

APPENDICIES 50

Minimum Bend Radius

Fitting Reference Page Crimp Single Skive (-12, -16) 106 Internal Skive (-12, -16) 118 Socket Data 64 Reusable Fitting (-8 only) 169 Socket Data 65

SPECIALTY & TRUCK HOSE

FC325 AQP Four spiral wire

FC325-12 FC325-16

Hose I.D.

19,1 25,4

0.75 1.00

Construction AQP elastomer tube, 4-spiral wire reinforcement and a blue AQP elastomer cover. Operating Temperature Range –40°C to +150°C [–40°F to +302°F]

Hose O.D.

32,0 38,6

bar

psi

bar

psi

1.26 1.52

350,0 350,0

5000 5000

1400,0 1400,0

20000 20000

Minimum Bend Radius

241,3 304,8

Weight of Hose

Kg/m

lbs/ft

9.50 12.00

1,62 2,11

1.09 1.42

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Internal Skive Socket Data

Page HIGH PRESSURE HOSE

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

123 64

HOSE FITTINGS

GH493 MATCHMATE Plus 1/2 SAE bend radius Four spiral wire

ADAPTERS & TUBE FITTINGS

SAE 100R12, EN 856 Type R12 r

bar

psi

bar

psi

GH493-6

9,7

0.38

20,1

0.79

GH493-8

12,7

0.50

23,4

0.92

GH493-10

16,0

0.63

28,2

1.11

385,0 280,0 350,0 280,0 350,0 280,0

GH493-12

19,1

0.75

30,5

1.20

280,0

4000

1120,0

16000

GH493-16

25,4

1.00

37,6

1.48

280,0

4000

1120,0

16000

GH493-20

31,8

1.25

46,5

1.83

210,0

3000

840,0

12000

GH493-24

38,1

1.50

53,8

2.12

GH493-32

50,8

2.00

67,1

2.64

175,0 175,0 210,0‡

2500 2500 3000‡

700,0 10000 700,0 10000 840,0‡ 12000‡

Construction Synthetic rubber tube, 4-spiral wire reinforcement, black synthetic rubber cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

5500 4000* 5000 4000* 5000 4000*

1517,0 1120,0 1400,0 1120,0 1400,0 1120,0

22000 16000* 20000 16000* 20000 16000*

Application Hydraulic system service with petroleum and water-base fluids, for general industrial use. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

62,5** 2.50** 125,0 5.00 90,0** 3.50** 180,0 7.00 100,0** 4.00** 200,0 8.00 120,0** 4.75** 240,0 9.50 150,0** 6.00** 300,0 12.00 210,0** 8.25** 420,0 16.50 250,0** 10.00** 500,0 20.00 320,0** 12.50** 640,0 25.00

*Pressure rating with TTC12 fittings and reusables **1/2 SAE Bend Radius with TTC12 fittings. ‡ Pressure rating with TTC12 fitting only. For Complete Agency Listings See pages 346-348.

Weight of Hose

Kg/m

lbs/ft

0,70

0.47

0,88

0.59

1,03

0.69

1,37

0.92

1,82

1.22

2,44

1.64

3,12

2.10

4,18

2.81

Fitting Reference Crimp TTC12 Single Skive Internal Skive§ Socket Data Reusable Fitting Socket Data § -16 thru -32 only

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Hose O.D.

Minimum Bend Radius

HOSE ASSEMBLY EQUIPMENT

Hose I.D.

Minimum Burst Pressure

Page 66 106 118 64

APPENDICIES

Part Number

Maximum Operating Pressure

169 65

SPECIALTY & TRUCK HOSE

FC659 Flexible, 1/2 SAE bend radius Four spiral wire Exceeds SAE 100R12, EN856 Type R12

r LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

FC659-06 FC659-08 FC659-10 FC659-12 FC659-16 FC659-20 FC659-24 FC659-32

Hose I.D.

9,7 12,7 16,0 19,1 25,4 31,8 38,1 50,8

0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00

Construction Synthetic rubber tube, 4-spiral wire reinforcement and synthetic rubber cover.

HOSE FITTINGS

Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

20,1 23,4 28,2 30,5 37,6 46,5 55,0 68,3

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

0.79 0.92 1.11 1.20 1.48 1.83 2.17 2.69

280,0 280,0 280,0 280,0 280,0 210,0 175,0 175,0

4000 4000 4000 4000 4000 3000 2500 2500

1120,0 1120,0 1120,0 1120,0 1120,0 840,0 700,0 700,0

Application Hydraulic system service with petroleum and water-base fluids requiring premium performance and flexibility. For more specific information on fluid applications, see pages 349-355.

psi

16000 16000 16000 16000 16000 12000 10000 10000

* 1/2 SAE Bend Radius

ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

62,5* 2.50* 90,0* 3.50* 100,0* 4.00* 120,0* 4.75* 150,0* 6.00* 210,0* 8.25* 250,0* 10.00* 320,0* 12.50*

For Complete Agency Listing See pages 346-348.

ADAPTERS & TUBE FITTINGS 52

Minimum Bend Radius

Weight of Hose

Kg/m

lbs/ft

0,70 0,85 1,04 1,34 1,80 2,43 3,06 4,44

0.47 0.57 0.70 0.90 1.21 2.40 2.06 2.99

Fitting Reference Crimp TTC12

Page 66

SPECIALTY & TRUCK HOSE

FC736 BRUISER Ultra-abrasion resistant cover Four spiral wire Exceeds SAE 100R12, EN 856 Type R12

FC736-06

9,7

.38

20,1

.79

FC736-08

12,7

.50

23,4

.92

FC736-10 FC736-12 FC736-16 FC736-20 FC736-24 FC736-32

16,0 19,1 25,4 31,8 38,1 50,8

.63 .75 1.00 1.25 1.50 2.00

28,2 30,5 37,6 46,5 55,1 68,3

1.11 1.20 1.48 1.83 2.17 2.69

Construction Synthetic rubber tube, 4-heavy spiral wire reinforcement, synthetic rubber intermediate cover, and BRUISER outer cover. Operating Temperature Range –40°C to +121°C (–40°F to +250°F)

bar

psi

bar

psi

385,0 280,0 350,0 280,0 350,0 280,0 280,0 280,0 210,0 175,0 175,0

5500 4000* 5000 4000* 5000 4000* 4000 4000 3000 2500 2500

1517,0 1120,0 1400,0 1120,0 1400,0 1120,0 1120,0 1120,0 840,0 700,0 700,0

22000 16000* 20000 16000* 20000 16000* 16000 16000 12000 10000 10000

Application High abrasion industrial and hydraulic system applications with petroleum and water-based fluids. Recommended for use on crical applications in construction, forestry, and other off-highway vehicles. BRUISER outer cover offers unmatched abrasion, chemical and environmental protection. For more information on specific fluid applications and temperature ratings, see pages 349-355.

Weight of Hose

Kg/m

lbs/ft

127,0

5.00

0,70

0.47

177,8

7.00

0,88

0.59

241,3 241,3 304,8 419,1 508,0 635,0

9.50 9.50 12.00 16.50 20.00 25.00

1,19 1,37 1,82 2,44 2,99 4,37

0.80 0.92 1.22 1.64 2.01 2.94

For Complete Agency Listings See pages 346-348.

*Pressure rating with TTC12 fittings and reusables.

HIGH PRESSURE HOSE

Hose O.D.

Fitting Reference Page Crimp TTC12 66 Single Skive 106 Internal Skive (-16, -20) 118 Socket Data 64 Reusable Fitting 169 Socket Data 65

HOSE FITTINGS

Hose I.D.

Minimum Bend Radius

ADAPTERS & TUBE FITTINGS

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC254 Four heavy spiral wire Exceeds SAE 100R11, EN 856 4SP

12,7 19,1 25,4 31,8 38,1 50,8

0.50 0.75 1.00 1.25 1.50 2.00

Construction Synthetic rubber tube, 4-heavy spiral wire reinforcement and synthetic rubber cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

24,9 32,0 38,6 45,7 54,1 68,1

bar

psi

bar

psi

0.98 1.26 1.52 1.80 2.13 2.68

525,0 435,0 350,0 280,0 210,0 210,0

7500† 6250 5000 4000 3000 3000

2100,0 1750,0 1400,0 1120,0 840,0 840,0

30000 25000 20000 16000 12000 12000

Application Hydraulic system service with petroleum and water-base fluids, for general industrial use. For more specific information on fluid applications, see pages 349-355. For Complete Agency Listings See pages 346-348.

Minimum Bend Radius

203,2 279,4 304,8 419,1 508,0 635,0

Weight of Hose

Kg/m

lbs/ft

8.00 11.00 12.00 16.50 20.00 25.00

0,70 0,88 1,03 1,37 1,82 2,44

0.47 0.59 0.69 0.92 1.22 1.64

† Rated at 10,000 psi for water blast applications using internal skive fittings.

* Available with BRUISER cover as FC854-08.

HOSE ASSEMBLY EQUIPMENT

FC254-08* FC254-12 FC254-16 FC254-20 FC254-24 FC254-32

Hose I.D.

Minimum Burst Pressure

Fitting Reference Page Crimp Spiral TTC 97 Single Skive (-12, -16) 113 Single Skive (-20, -24) 106 Internal Skive 118 Socket Data 64

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

APPENDICIES

Part Number

Maximum Operating Pressure

SPECIALTY & TRUCK HOSE

FC273 Four or six spiral wire SAE 100R13, EN 856 Type R13, ISO 3862 Type R13

r LOW & MEDIUM PRESSURE HOSE

Part Number

HIGH PRESSURE HOSE

FC273-12 FC273-16 FC273-20 FC273-24 FC273-32

Hose I.D.

19,1 25,4 31,8 38,1 50,8

0.75 1.00 1.25 1.50 2.00

Construction Synthetic rubber tube, multiple heavy spiral wire (4 wire for -12, -16; 6 wire for -20, -24 and -32); black synthetic rubber cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Maximum Operating Pressure

Hose O.D.

32,0 38,6 49,8 57,4 71,1

bar

1.26 1.52 1.96 2.26 2.80

350,0 350,0 350,0 350,0 350,0

psi

5000 5000 5000 5000 5000

Minimum Burst Pressure

bar

psi

1400,0 1400,0 1400,0 1400,0 1400,0

20000 20000 20000 20000 20000

Minimum Bend Radius

240,0 300,0 420,0 500,0 640,0

Weight of Hose

Kg/m

lbs/ft

9.50 12.00 16.50 20.00 25.00

1,56 1,96 3,66 4,70 7,11

1.05 1.32 2.46 3.16 4.78

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Spiral TTC Single Skive Internal Skive Socket Data

Page 97 113 123 64

HOSE FITTINGS ADAPTERS & TUBE FITTINGS

FC273B BRUISER Ultra-abrasion resistant cover Four or six spiral wire SAE 100R13, EN 856 Type R13, ISO 3862 Type R13 r Part Number

ACCESSORIES & ASSEMBLY INSTRUCTIONS

FC273B-12 FC273B-16 FC273B-20 FC273B-24 FC273B-32

Hose I.D.

19,1 25,4 31,8 38,1 50,8

0.75 1.00 1.25 1.50 2.00

HOSE ASSEMBLY EQUIPMENT

Construction Synthetic rubber tube, multiple heavy spiral wire (4 wire for -12, -16; 6 wire for -20, -24 and -32); synthetic rubber intermediate cover and BRUISER outer cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

33,3 39,9 51,3 58,9 72,6

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

1.31 1.57 2.02 2.32 2.86

350,0 350,0 350,0 350,0 350,0

5000 5000 5000 5000 5000

1400,0 1400,0 1400,0 1400,0 1400,0

psi

20000 20000 20000 20000 20000

240,0 300,0 420,0 500,0 640,0

Kg/m

lbs/ft

1,55 1,95 3,63 4,78 7,05

1.04 1.31 2.44 3.21 4.74

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

9.50 12.00 16.50 20.00 25.00

ical and environmental protection. For more information on specific fluid applications and temperature ratings, see pages 349-355.

APPENDICIES 54

Minimum Bend Radius

Fitting Reference Crimp Spiral TTC

Page 97

SPECIALTY & TRUCK HOSE

GH506 Four spiral wire EN 856 4SH

GH506-12* GH506-16* GH506-20* GH506-24* GH506-32*

Hose I.D.

19,1 25,4 31,8 38,1 50,8

0.75 1.00 1.25 1.50 2.00

Construction Synthetic rubber tube, 4-spiral wire reinforcement, synthetic rubber cover.

32,3 38,4 45,5 53,6 68,1

bar

psi

bar

psi

1.27 1.51 1.79 2.11 2.68

420,0 380,0 350,0 300,0 250,0

6090 5510 5075 4350 3625

1680,0 1520,0 1400,0 1200,0 1000,0

24360 22040 20300 17400 14500

Application Four wire hose for high pressure hydraulic systems with petroleum and water-base fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

280,0 340,0 460,0 560,0 700,0

Weight of Hose

Kg/m

lbs/ft

11.00 13.38 18.11 22.05 27.56

1,49 2,05 2,54 3,27 4,58

1.00 1.38 1.71 2.20 3.08

For Complete Agency Listings See pages 346-348. * Also available as an M100 length (GH506-12M100). This P/N is a minimum 100 feet in length.

Fitting Reference Crimp Spiral TTC

Page 97

ADAPTERS & TUBE FITTINGS

HOSE FITTINGS

Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

Minimum Bend Radius

HIGH PRESSURE HOSE

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

GH466 Six spiral wire

ACCESSORIES & ASSEMBLY INSTRUCTIONS

* -32 size is also available. See bulletin A-HOSP-MS003-E for more information.

31,8 38,1

1.25 1.50

Construction Synthetic rubber tube, 6-spiral wire reinforcement, synthetic rubber cover. Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

Hose O.D.

49,3 57,4

bar

psi

bar

1.94 2.26

420,0 420,0

6090 6090

1680,0 1680,0

Application Six wire spiral hose for pressure systems with extreme pressure peaks. For use with petroleum and water-base fluids. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

psi

24000 24000

Minimum Bend Radius

420,0 510,0

Weight of Hose

Kg/m

lbs/ft

16.50 20.80

3,48 4,63

2.34 3.11

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Spiral TTC

HOSE ASSEMBLY EQUIPMENT

GH466-20 GH466-24

Hose I.D.

Minimum Burst Pressure

Page 97

APPENDICIES

Part Number

Maximum Operating Pressure

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

SPECIALTY & TRUCK HOSE

FC606 Six spiral wire SAE 100R15

r LOW & MEDIUM PRESSURE HOSE

Part Number

FC606-16 FC606-20 FC606-24

Hose I.D.

25,4 31,8 38,1

1.00 1.25 1.50

HIGH PRESSURE HOSE

Construction Synthetic rubber tube, 6-spiral wire reinforcement, synthetic rubber cover. Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Maximum Operating Pressure

Hose O.D.

41,9 49,5 58,4

bar

psi

1.65 1.95 2.30

420,0 420,0 420,0

6000 6000 6000

Application High-pressure hydraulics, hydrostatic transmissions. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

Minimum Burst Pressure

bar

psi

1680,0 1680,0 1680,0

24000 24000 24000

Minimum Bend Radius

304,8 419,1 508,0

Weight of Hose

Kg/m

lbs/ft

12.00 16.50 20.00

2,66 3,62 4,72

1.79 2.43 3.17

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp Spiral TTC Internal Skive Socket Data

Page 97 128 64

HOSE FITTINGS ADAPTERS & TUBE FITTINGS

FC606B BRUISER Ultra-abrasion resistant cover Six spiral wire SAE 100R15, ISO 3862 Type R15

ACCESSORIES & ASSEMBLY INSTRUCTIONS

Part Number

FC606B-16 FC606B-20 FC606B-24

Hose I.D.

25,4 31,8 38,1

1.00 1.25 1.50

Construction Synthetic rubber tube, 6-spiral wire reinforcement, synthetic rubber intermediate cover and BRUISER outer cover.

HOSE ASSEMBLY EQUIPMENT

Operating Temperature Range –40°C to +121°C [–40°F to +250°F]

Hose O.D.

42,9 51,6 58,9

Maximum Operating Pressure

Minimum Burst Pressure

bar

psi

bar

psi

1.69 2.03 2.32

420,0 420,0 420,0

6000 6000 6000

1680,0 1680,0 1680,0

24000 24000 24000

Application High-abrasion industrial and hydraulic system applications with petroleum and water-based fluids. Recommended for use on critical applications in construction, forestry, and other off-highway vehicles. BRUISER outer

304,8 419,1 508,0

Kg/m

lbs/ft

2,60 3,57 4,57

1.79 2.43 3.07

For Complete Agency Listings See pages 346-348.

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007

Weight of Hose

12.00 16.50 20.00

cover offers unmatched abrasion, chemical, and environmental protection. For more information on specific fluid applications and temperature ratings, see pages 349-355

APPENDICIES 56

Minimum Bend Radius

Fitting Reference Crimp Spiral TTC

Page 97

SPECIALTY & TRUCK HOSE

FC579 10,000 PSI Jack Hose Double wire braid Meets IJ100 requirements

bar

psi

700,0 700,0

10000 10000

Application Hydraulic jacking system service with petroleum and water-base fluids. Meets the performance requirements of the Material Handling Institute Specification IJ100. For more information on specific fluid applications and high temperature ratings, see pages 349-355.

bar

psi

1400,0 20000 1400,0 20000

50,8 63,5

Kg/m

lbs/ft

2.00 2.50

0,33 0,43

0.22 0.29

For Complete Agency Listings See pages 346-348.

Fitting Reference Crimp TTC Skive Nipple Socket Data

Page HIGH PRESSURE HOSE

Operating Temperature Range –40°C to +100°C [–40°F to +212°F]

0.53 0.69

66 66 64

HOSE FITTINGS

Construction Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover.

13,5 17,5

ADAPTERS & TUBE FITTINGS

0.25 0.38

Weight of Hose

ACCESSORIES & ASSEMBLY INSTRUCTIONS

6,4 9,7

Hose O.D.

HOSE ASSEMBLY EQUIPMENT

FC579-04 FC579-06

Hose I.D.

Minimum Bend Radius

APPENDICIES

Part Number

Minimum Burst Pressure

LOW & MEDIUM PRESSURE HOSE

r Maximum Operating Pressure

EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007