Joico katalog by Nenad Krstic

VOL

LeCUT Lyndsay

Section hair as shown. The sectioning pattern will determine the amount of contrast between the shorter area underneath and the longer top area. The sectioning pattern is not symmetrical: the asymmetrical pattern shifts and off-sets the overall shape.

Take a diagonal parting that reflects the front hairline pattern.

Continue to take diagonal partings and slightly overdirect. For example, the second parting is slightly overdirected to the first, the third parting is overdirected to the second, and so forth.

The diagonal parting extends into the nape area, behind the ear. Continue the process of slightly overdirecting and slightly elevating to create a smooth band of graduation.

12-13

Refine the hairline: comb the hair forward using the comb as a stabilizer, then point and chip into the temple area.

Further refine using scissorover-comb and pointing. Both methods are used for refining the outline. Do not cut into the internal lengths; only focus on the perimeter.

Repeat the process of refining the nape hairline. Always work with the natural growth pattern. Pointing and chipping into the hairline adds further softness to a strong, structured shape. The hairline should naturally fade into the nape.

Continue as before, taking diagonal partings. Note the partings in the nape will extend to the opposite side, just working past the center back of head. Note the weight area is high and close to the head.

Repeat the process on the opposite side.

05-06

09-10

Continue to work around the back of the head. Avoid excess overdirection or unnecessary build up of weight.

Cross-check horizontally and diagonally. Further refine. Blow-dry hair smooth with a Denman brush using the wrapping technique.

Internal lengths: note this area will not connect to the area underneath; however, it will visually blend depending on how the hair is styled. Take a diagonal parting that extends from the temple area to the crown and cut to desired length.

Using the same parting pattern, overdirect all partings at the side to the first guide.

Return to the original guide at the top area. Work on back area by taking diagonal partings and overdirecting the hair to the first guide. Note: The entire parting pivots off the crown area. Crowns vary, so adjust technique accordingly.

View of haircut at this stage.

20-21

Using the guide from the crown area, take a parting that extends from the crown to the front hairline. Connect the crown and front area.

Continue to pivot the partings, overdirecting all partings to the first guide.

View of haircut at this stage.

28-29

View of haircut at this stage.

Continue line as before: note the line is diagonal and asymmetrical in length.

View of haircut at this stage.

23-24

25-26

Return to opposite side back area and repeat. Overdirect all partings to the first guide. Cross-check.

Establish length that falls over the shorter area underneath. Create a heavy line. Cut though fingers and then refine through the comb.

31-32

Finally, cross-check internally and remove any unwanted corners or weight. The hair is now ready for the color technique. To ensure haircut and haircolor complement one another, refine haircut after color process is complete.

Refine fringe area. Do not section this area: allow the hair to fall in its natural position and cut a heavy, curved off balance line.

LeCOLOR Lyndsay

PHASE 1

Lightening

PRE-LIGHTEN FORMULA:

=LYV3PNO[ +\Z[ -YLL Lightening Powder with 10 Volume (3%) Veroxide

COLOR FORMULA: Formula 1: =LYV 2 7(2 Chrome G8 with Vero 2 7(2 *OYVTL (J[P]H[VY (gold foil) Formula 2: =LYV 2 7(2 Color 9RG with 10 Volume (3%) Veroxide (copper foil) Formula 3: =LYV 2 7(2 Color ยน/3 6RR + ยน/3 4VR + ยน/3 ;)) JT PUJO YPIIVU 4FV with 10 Volume (3%) Veroxide (purple foil)

BEFORE

Lindsay has a colored, Level 5, golden brown hair.

Starting with a slight off center parting at the crown (working toward the fringe and ear area), take a zigzag ^LH]L WHY[PUN VM \U MVPSLK hair and clip it away. Take H KPHNVUHS OVYPaVU[HS ZSPJL parting apply Lightening Formula ยผ cm (ยน/8 PUJO MYVT the scalp area through the midshaft to the ends.

+PYLJ[S` \UKLYULH[O [HRL ZP_ HKKP[PVUHS OVYPaVU[HS diagonal slice partings and apply Lightening Formula.

Base Color: =LYV 2 7(2 Color ยน/3 4RV + ยน/3 6RR + ยน/3 TPB with 10 Volume (3%) Veroxide

PHASE 2

ColorTechnique 07

Starting on the right with a slight off center parting at the crown (working toward the fringe and ear area), take a zigzag weave WHY[PUN VM \U MVPSLK OHPY and clip it away. Take two KPHNVUHS OVYPaVU[HS ZSPJL partings and apply Formula +PYLJ[S` \UKLYULH[O [HRL H OVYPaVU[HS KPHNVUHS slice parting and apply Formula 2.

Take two additional slice partings with Formula 2 and three additional OVYPaVU[HS KPHNVUHS ZSPJL partings with Formula 3. Change the position of the foil (stagger it back toward the back, above the ear), take a weave parting, and apply Formula 1.

Take a horizontal slice parting and apply Formula 2. Take four additional slice partings and apply Formula 3.

Proceed to the top section on the opposite side. Take out a deep weave parting VM \U MVPSLK OHPY HUK JSPW P[ H^H` ;HRL [OYLL IHJR [V IHJR OVYPaVU[HS KPHNVUHS weave partingsâ&#x20AC;&#x201D;picking up the points of the deep zigzagâ&#x20AC;&#x201D;and apply Lightening Formula. Take MV\Y OVYPaVU[HS KPHNVUHS slice partings (with the last two foils approximately JT PUJOLZ PU ^PK[O toward the fringe area) and apply Lightening Formula. Stagger the slice partings back toward the back of the head and above the ear.

Take two additional horizontal slice partings and apply Lightening Formula.

Completed foiling procedure for Phase 1. Lift to a Level 9 light blonde. Then rinse. Apply Color Endure Shampoo, YPUZL (WWS` 2 7(2 Professional Cuticle Sealer for 5 minutes, rinse. Apply 2 7(2 +LLW 7LUL[YH[PUN Reconstructor for 5 minutes, rinse. Then dry the hair. Proceed to phase 2.

Proceed to the top section on the opposite side. Take out a deep weave parting VM \U MVPSLK OHPY HUK JSPW P[ away. Take two partings, picking up the points of the zigzag parting, and apply Formula 3.

Take a weave parting and apply Formula 2. Take two weave partings and apply Formula 1. Take a weave parting and apply Formula ;HRL [OYLL IHJR [V IHJR OVYPaVU[HS KPHNVUHS slice partings and apply Formula 3.

Completed foiling procedure. Apply Base Color to all \U MVPSLK OHPY WYVJLZZ JVSVY accordingly, then rinse. Apply Color Endure Shampoo, YPUZL (WWS` 2 7(2 Professional Cuticle Sealer for 5 minutes, rinse. Apply 2 7(2 0U[LUZL /`KYH[VY MVY 5 minutes, rinse. Then dry the hair and style with the HWWYVWYPH[L 1VPJV VY +LZPNU Collection styling products.

05 cont.

11 cont.

LeCUT Rosie

02-04

View of sectioning pattern.

Take a vertical parting that extends from the crown to the nape area. Note: The ÄYZ[ WHY[PUN N\PKLSPUL PZ VMM center. Be aware of growth pattern at the crown area. Cut to a length to create H [PNO[ Ä[[LK OLHK ZOHWL Note the crown is slightly longer in length and the nape is slightly shorter. Always adjust angles based on overall desired shape.

10-11 Last remaining partings. Slightly elevate each parting, overdirecting each to maintain length.

05 Slightly pivot using the ÄYZ[ N\PKLSPUL 6]LYKPYLJ[ the second parting to the ÄYZ[ [OL [OPYK WHY[PUN [V the second, and repeat the process. Overdirection creates length and weight. Adjust the overdirection as desired.

Return to original guideline and repeat the process.

On last remaining parting, overdirect and elevate.

Proceed to the side area. This area is the shortest length throughout the haircut and will not connect to any other areas within the haircut. Take a slightly diagonal parting at the temple/ hairline area and cut close to the head as desired.

06-07

08-09

Continue to pivot partings as before; Overdirect as desired. Note: Overdirection will create more length and weight behind the ear area.

Continue as before. Note: The elevation and the hair PZ J\[ V]LY [OL Ă&#x201E;UNLYZ 5V[L that in the nape area the hair is cut in the palm of the hands to allow for easier access to the nape area.

Continue taking slightly diagonal partings, slowly working toward vertical partings. Slightly overdirect partings to build subtle weight in the side area.

The last remaining partings are vertical. Note that the shorter area extends slightly behind the ear.

*YVZZ JOLJR OVYPaVU[HSS`" 9LĂ&#x201E;UL HZ ULJLZZHY`

Proceed to the opposite side. Take a horizontal parting, elevate approximately 90 degrees, and cut to the desired length. The objective to is create a heavy line of graduation. Optional: Connect to the back area.

19-20

Continue to slightly elevate each parting to create a low band of graduation. View of weight. Note: The graduation is low and heavy.

20-22

Continue to take horizontal partings working up toward the parting area. Use the guideline from the side area to establish and extend to the fringe/front lengths. Overdirect fringe area to maintain an angular, graphic SPUL 9LÄUL [OL SPUL I` combing the hair against the skin for greater control. )SV^ KY` [OL OHPY ZTVV[O \ZPUN H +LUTHU IY\ZO

9LÄUL [OL ZOVY[LZ[ HYLH VM the haircut, particularly the temple area and hairline, using a combination of WVPU[J\[[PUN HUK ZJPZZVY V]LY JVTI

30-31

31-34

Comb the hair to opposite ZPKL HUK YLÄUL [OL MYVU[ area using a combination of chipping and pointing. Note the haircut’s versatility when combed in opposite directions.

Use a combination of ZJPZZVY V]LY JVTI chipping, and pointing to enhance the nape area. Note the perimeter is slightly asymmetrical. Always work with the natural hairline growth pattern.

To maintain length and weight in front area, connect the internal lengths by overdirecting hair back toward the crown area. Round any corners present in through the top area. *YVZZ JOLJR PU[LYUHSS` \ZPUN horizontal and diagonal partings.

27-28

Taper the hairline (the shortest length) using ZJPZZVY V]LY JVTI ;OL outline is cut close and fades into the natural hairline growth pattern.

Repeat the process on VWWVZP[L ZPKL 6US` YLÄULK the outline around the ear area.

Use the hands or cutting comb to overdirect and YLÄUL [OYV\NO [OL [LTWSL hairline area. Slight pointing, chipping, and elevation JYLH[LZ H [HWLYLK ]LS]L[ SPRL ÄUPZO [V [OL OHPY

9LÄUL [OL MYPUNL HYLH <ZL the cutting comb to stabilize the line. To make the line LHZPLY [V ÄUPZO [PS[ [OL head slightly downward so the hair falls slightly away from the face. Elevate as necessary to add further graduation.

Optional 32

The hair is now ready for the color technique. To ensure haircut and haircolor complement one another, YLÄUL OHPYJ\[ HM[LY JVSVY process is complete.

32-34 To maintain length and weight in front area, connect the internal lengths by overdirecting hair back toward the crown area. Round any corners present in through the top area. *YVZZ JOLJR PU[LYUHSS` \ZPUN horizontal and diagonal partings.

35 Remove any excess length behind ear by pointing the hairline.

LeCOLOR Rosie

PHASE 1 LIGHTEN FORMULA:

Lightening

=LYV 2 7(2 *YuTL Lightener with 20 Volume (6%) Veroxide for the YL NYV^[O

COLOR FORMULA: Formula 1: =LYV 2 7(2 Chrome G9 with Vero 2 7(2 *OYVTL (J[P]H[VY (gold foil) Formula 2: =LYV 2 7(2 Chrome Â˝ RC8 + Â˝ Really 6YHUNL ^P[O =LYV 2 7(2 Chrome Activator (copper foil) Formula 3: =LYV 2 7(2 Color Â˝ TPB + Â˝ INV with 10 Volume (3%) Veroxide (purple foil) Formula 4: =LYV 2 7(2 Chrome Âź V4 + Âž Clear ^P[O =LYV 2 7(2 *OYVTL Activator (blue foil)

BEFORE

Rosie has natural, Level 4, dark brown hair with 1 Â˝ cm ĂŞ PUJO YL NYV^[O ;OL midshaft and ends are a lightened (bleached), Level 9 yellow.

Starting at the fringe, section out an overhang of what will later be base color. Working off a side parting in the fringe area and around the hairline, take a vertical slice parting and apply Formula 4.

Take a vertical slice parting and apply Formula 3.

Base Color: =LYV 2 7(2 Chrome RC6 with Vero 2 7(2 *OYVTL (J[P]H[VY

PHASE 2

ColorTechnique

;HRL H Ă&#x201E;M[O ]LY[PJHS diagonal slice parting and apply Formula 2.

;HRL H ZP_[O ]LY[PJHS diagonal slice parting and apply Formula 3.

*VU[PU\L [HRPUN ]LY[PJHS KPHNVUHS IHJR [V IHJR slice partings: one foil Formula 4; one foil Formula 2; one foil Formula 1; one foil Formula 2; one foil Formula 3; one foil Formula 2; one foil Formula 1; and one foil Formula 2.

;HRL H [OPYK ]LY[PJHS diagonal slice parting and apply Formula 2.

;HRL H MV\Y[O ]LY[PJHS diagonal slice parting and apply Formula 1.

Proceed to the opposite side area. Working behind the ear area, take a vertical slice parting apply Formula *VU[PU\L [HRPUN IHJR [V IHJR ]LY[PJHS ZSPJL partings: one foil Formula 2; one foil Formula 1; and one foil Formula 4.