FLIR SC7600 P/N: 66101-0101 Copyright © 2014, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.: 66101-0101 Release: Commit: 22369 Language: en-US Modified: 2014-12-19 Formatted: 2014-12-20 Corporate Headquarters FLIR Systems, Inc. 27700 SW Parkway Ave. Wilsonville, OR 97070 USA Telephone: +1-503-498-3547
Detector/image Detector type
Focal plane array (FPA)
Website
Sensor material
InSb
IR resolution
640 × 512
http://www.flir.com Customer support
Detector pitch
15 µm
Disclaimer
f-number
f/3
Specifications subject to change without further notice. Camera models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.
Optical interface
M80 thread
Lens identification
N/A
Windowing
320 × 256/160 × 128
http://support.flir.com
Arbitrary size windowing (down to)
48 × 4
Arbitrary size windowing (steps)
Horizontal: ≥48, steps of 16 pixels Vertical: ≥4, steps of 4 pixels
Maximum image frequency (full frame)
100 Hz
Maximum image frequency
3425 Hz
Maximum frame rate
100 Hz @ 640 × 512 @ 20 µs /IWR 328 @ 320 × 256 @ 20 µs/IWR 870 Hz @ 160 × 128 @ 10 µs/ IWR 3425 Hz @ 48 × 4 @ 10 µs/IWR
Integration time range
0.1–20 000 µs
Integration time step
200 ns
Integration time mode
IWR/ITR
Digital output
GigE/Camlink base
Cooler type
Closed-cycle (rotary) Stirling cooler
Cooling temperature
77 K
Operability
>99.5%
Physical data
1 (5)
Size (L × W × H)
253 mm × 130 mm × 168 mm (9.96″ × 5.12″ × 6.61″) (without lens)
Weight without lens
4.950 kg (10.910 lb.) (without lens)
Tripod mounting
UNC ¼″-20
www.flir.com
FLIR SC7600
P/N: 66101-0101
Power system
© 2014, FLIR Systems, Inc.
Power supply
12 V DC (10–15 V DC)
Power consumption (cooldown/stab)
30 W/25 W
#66101-0101; r. /22369; en-US
Environmental data Operating temperature range
–20°C/+50°C (–4°F/131°F)
Bump
Operational 25G, IEC 68-2-29
Vibration
Operational 2G, IEC 68-2-26
Encapsulation
IP 54 (IEC 60529)
Radiometry/measurement Spectral range
1.5–5.5 µm
Thermal sensitivity/NETD
<25 mK (20 mK typical)
CNUCTM/HypercalTM
Yes
CLUT/extended linear response
No
Temperature measurement accuracy
±1°C (1.8°F) or ±1%
Maximum temperature without filter
300°C (572°F)
Well capacity (e-)
7 Me-
Filter wheel
4 slots for 1″ filter 1 mm thick
Filter holding
Screw-in holder
Timings and signals SYNC IN
LVTTL
SYNC IN jitter SYNC IN active edge
Falling or rising edge
Delay between SYNC IN and integration
2.2–2.4 µs ITR
Delay between SYNC IN and top frame
1.8–2 µs ITR and IWR
Analog signals
1 × (–5 to 5 V) + 2 × (0–10 V)
TRIGGER IN
LVTTL
Video output
PAL or NTSC/composite or S-Video
Waveform generator
N/A
Ethernet GigE Vision
Yes
Camera link Connector type
1 × MDR26
Tap number
1 (A/B)
Bit depth
16 bpp
Radio Wi-Fi
N/A
Antenna
N/A
Shipping information Packaging, type Packaging, weight Packaging, size EAN-13
2 (5)
www.flir.com
7332558007990
FLIR SC7600
P/N: 66101-0101
Shipping information
Š 2014, FLIR Systems, Inc.
UPC-12
845188008352
Country of origin
Sweden
#66101-0101; r. /22369; en-US
Lenses Available optic 1
L0315 12 mm f/2
Available optic 2
L0116 25 mm f/2
Available optic 3
L0106 50 mm f/2
Available optic 4
L0118 100 mm f/2
Available optic 5
L0804 200 mm f/2
Available optic 6
L0120 Close up x1 f/2
Available optic 7
L0120E Close up x3 f/2
Available optic 8
L0905 Close up x1 wd 30cm
Available optic 9
L0709T 27 mm BB f/3
Available optic 10
L0608T 50 mm BB f/3
Available optic 11
L0604T 100 mm BB f/3
Available optic 12
L0701 200 mm BB f/3
Available optic 13
3 (5)
www.flir.com
F
E
D
C
B
48,50
34,50
3,80
96
160,50
238
1
48,50
4 x M5 PROF. = 7,5 mm 4 x M5 DEPTH = 7,5 mm
150,50
=80=
- 0,1 15 - 0,3
2
133,25
50
118
118 50
50
25
256,55
246
191
82,50
0
2 x 2 M5 PROF. = 7,5 mm 2 x 2 M5 DEPTH = 7,5 mm
4 x M5 PROF. = 6,8 mm 4 x M5 DEPTH = 6,8 mm
0
A
15
1/4" 20 UNC PROF. = 10 mm 1/4" 20 UNC DEPTH = 10 mm
7 : POWER ON/OFF
3
4 x M4 PROF. = 8,5 mm 4 x M4 DEPTH = 8,5 mm
4
1
6 : S. VIDEO LEMO ECP.1S.306.CLN
5 : TRIGGER LEMO ECP.0S.304.CLN
4 : POWER IN LEMO ECP.1S.302.CLN
3 : (OPTIONAL) LOCKIN LEMO ECP.1S.305.CLN
2 : USB 2 TYPE B
2
1 : (OPTIONAL) CAMERA LINK 3M. MDR 26
2 x 2 M4 PROF. = 8,5 mm 2 x 2 M4 DEPTH = 8,5 mm
167,50
69,80
3 5
130
4
66
65
6
7
AXE OPTIQUE OPTICAL AXIS
146 83 55 46 100 246 220 100 70
68 58 59 67 120 142 67 104 114
1 3
4
5 6
7
90 114 78 126 126 125 148 125
ØY
Z 122 122 30 104 108 109 117 295
Tel : +33 1 60 37 01 00 Fax : +33 1 64 11 37 55
3
3 ±0,1
2
5
8
6
98 51
L0608 - 50mm 3.0 SWB
Doc. Ref. :
C0602.M101
53
51
B
B 24/02/09 MàJ Faces arrières + optiques PPa A 12/03/07 Creation PPa Rev. Date Check Author MODIFICATION Scale: Mechanical Interface Drawing SHEET 1/1 1:3 REV.
L0709 - 25mm 3.0 SWB
L0701 - 200mm 3.0 SWB 122 283,5
72
D
C
B
A
50 94 92 95 186 E
Z
7
BB L0604 - 100mm 3.0 SWB 113
Optique ØY Lens LWIR HD L0519 - 50mm 2.0 70 L0602 - 50mm 2.0 M 126 L0517 - 100mm 2.0 120 L0601 - 100mm 2.0 M 153 L0520 - 250mm 2.0 156
52,245 ±0,4
24,20 ±0,1
Z
FILTRE FILTER
4
89 H7
Information contained in this document is the property of FLIR ATS and is communicated confidentially for a specific matter. The receiver is in charge of this document and ensures that it will not be either copied or reproduced in all or part, and that the content will not be disclosed in any way to anybody except for its proper use The receiver is in charge of destroying any previous revision of this document in his possession.
19, Bd Georges Bidault FRANCE - 77183 CROISSY-BEAUBOURG
Date : 12/03/07
All dimensions are in mm
A2
92 107 91 68 197 193
Z
1
Legend M : Motorized Lxxxx : Discontinued
Optique ØY Lens LWIR L0306 - 12mm 2.0 62 L0324 - 25mm 2.0 69 L0302 - 50mm 2.0 83 L0201 - 100mm 2.0 120 L0113 - 200mm 2.0 125 L0215 - G1 2.0 70
PLAN FOCALE OPTICAL FOCAL PLANE
Gen. Tol. : ±1 Surface Finishing : n/a Treatment : n/a Material : n/a Designer : PPa
Optique Lens MWIR HD L0501 - 25mm 2.0 L0303 - 25mm 2.0 M L0203 - 50mm 2.0 L0211 - 50mm 2.0 M L0514 - 50mm 2.9 M L0008 - 100mm 2.0 L0121 - 100mm 2.0 M L0110 - 250mm 2.9
7 : POWER ON/OFF
6 : POWER IN / TRIGGER Amphenol TVPS00FCI1519P
5 : Analog video 2
4 : Analo video 1
3 : LOCKIN
2 : CAMERA LINK Amphenol TVPS00FCI1726P
1 : Giga Ethernet Vision (RJ45) Amphenol RJSTV-22-G-03-100BTX
7
PLAN DE POSE OBJECTIF OPTICAL SURFACE MOUNTING
PLAN DE POSE MÉCANIQUE MECHANICAL REFERENCE PLANE
POIDS/WEIGHT : 5200g ±5%
5
6
AXE OPTIQUE OPTICAL AXIS
2
CENTRE DE GRAVITÉ ±5mm CENTER OF GRAVITY ±5mm
Z
ØY
7 : POWER ON/OFF
6 : S. VIDEO LEMO ECP.1S.306.CLN
5 : TRIGGER LEMO ECP.0S.304.CLN
4 : POWER IN LEMO ECP.1S.302.CLN
3 : (OPTIONAL) LOCKIN LEMO ECP.1S.305.CLN
2 : CAMERA LINK 3M. MDR 26
1 : Giga Ethernet RJ45
Optique Lens MWIR L0315 - 12mm 2.0 L0206 - 18mm 2.0 L0116 - 18mm 2.0 L0106 - 50mm 2.0 L0118 - 100mm 2.0 L0114 - 200mm 2.0 L0120 - G1 2.0 L0202 - 18mm 2.0 M L0323 - 50mm 2.0 M
96
5
100,50
4
100,50
3
25,40 (filter)
4,60 PROF. = 5,5 mm 4,60 DEPTH = 5,5 mm
2
M80x1
1
82,50 23,75
Y
F
E
D
C
B
1
2
1
PLAN DE POSE OBJECTIF OPTICAL SURFACE MOUNTING
7 : POWER ON/OFF
6 : S.VIDEO LEMO ECP.1S.306.CLN
5 : TRIGGER LEMO ECP.0S.304.CLN
3
4
25,25 ±0,38
1 ±0,1
25
5
2
6
3
1
2
AXE OPTIQUE OPTICAL AXIS
PLAN DE POSE MÉCANIQUE MECHANICAL REFERENCE PLANE
7 : POWER ON/OFF
PLAN FOCALE OPTICAL FOCAL PLANE
7
6 : S. VIDEO LEMO ECP.1S.306.CLN
5 : TRIGGER LEMO ECP.0S.304.CLN
4 : LOCKIN LEMO ECP.1S.305.CLN
100,5
4 : (OPTIONNAL) LOCKIN LEMO ECP.1S.305.CLN
5
6
0,50 ±0,1
7
8 x M3
4
130
111 ±0,3 122,5
80 ±0,3
66
97,75 ±0,3
7 : POWER ON/OFF 1
2
3 F7 PROF. 5 Ø3F7 DEPTH 5
AXE OPTIQUE OPTICAL AXIS
6,5 ±0,2
9 ±0,2
49 ±0,02
65 ±0,5
6 : POWER IN / TRIGGER Amphenol TVPS00FCI1519P
5 : Analog video 2
4 : Analog video 1
3 : LOCKIN
2 : CAMERA LINK Amphenol TVPS00FCI1726P
1 : Giga Ethernet Vision (RJ45) Amphenol RJSTV-22-G-03-100BTX
CENTRE DE GRAVITÉ ±5mm CENTER OF GRAVITY ±5mm
4
49 ±0,3
POIDS/WEIGHT : 4300g ±5%
3
60 ±0,3
3 : POWER IN LEMO ECP.1S.302.CLN
3 F7 PROF. 5 3F7 DEPTH 5
3 : POWER IN LEMO ECP.1S.302.CLN
30 ±0,2
2 : USB 2 TYPE B
16,5 ±0,2
2 : CAMERA LINK 3M. MDR 26
5
7,5
98
1 : Giga Ethernet Vision (RJ45)
18,5
1 : (OPTIONNAL) CAMERA LINK 3M. MDR 26
100,5
3
4
6
7
E
D
C
B
A
B
REV.
SHEET 1/1
Information contained in this document is the property of CEDIP INFRARED SYSTEMS and is communicated confidentially for a specific matter. The receiver is in charge of this document and ensures that it will not be either copied or reproduced in all or part, and that the content will not be disclosed in any way to anybody except for its proper use The receiver is in charge of destroying any previous revision of this document in his possession.
C0602.M102 Doc. Ref.:
1:2
--PPa --PPa Check Author Scale: Mechanical Interface Drawing without FF
B 07/12/07 + 4xM3 en face avant 12/03/07 Creation A MODIFICATION Rev. Date
19,5
Tel: +33 1 60 37 01 00 Fax: +33 1 64 11 37 55
A1
4,6 PROF. = 5,5 mm 4,6 DEPTH = 5,5 mm
8
4 x M5 PROF. = 7,5 mm 4 x M5 DEPTH = 7,5 mm
5,5
19,5
- 0,1 15 - 0,3
All dimensions are in mm
50 104,3
106
50
89
40,8
25 50
19, Bd Georges Bidault FRANCE - 77183 CROISSY-BEAUBOURG www.cedip-infrared.com
Date:12/03/07
Gen. Tol.: ±1 Surface Finishing: n/a Treatment: n/a Material: n/a Designer: PPa
82,5
191 217 221,8
2 x 2 M5 PROF. = 7,5 mm 2 x 2 M5 DEPTH = 7,5 mm
4 x M5 PROF. UTILE = 6,8 mm 4 x M5 DEPTH = 6,8 mm
4 x M4 PROF. = 8,5 mm 4 x M4 DEPTH = 8,5 mm
6
7
1/4" 20 UNC PROF. UTILE = 10 mm 1/4" 20 UNC DEPTH = 10 mm
2 x 2 M4 PROF.= 8,5 mm 2 x 2 M4 DEPTH = 8,5 mm
5
6
167,5
5
150,5
4
150,5
3
113,5
=80= 98
A
2
238
1
15 104 13
82,5 24
160,5