brochure-completa by Massimo Quattrociocchi

Bottle cooler & freezer counter top

Compact top loader for bottles For fitting in or on the bar counter top For chilling or freezing Ideal for serving out the contents quickly Professional image

Gamko bottle coolers & freezers inset & surface-mounted counter top

Gamko manufactures and supplies convenient coolers and freezers for inset or fitting on the bar counter top. These compact top loaders for bottles, also referred to as counter top coolers/freezers, are plug-ready and ideal for serving chilled wine, liqueur or vodka by glass, at a constant temperature. The cooler provides a good overview on the bottles from above. As a result you can conveniently and quickly see what you are looking for to ensure smooth service behind the bar. In addition, a bottle cooler built into the counter top is a real eyecatcher. And when you combine it with the correct glasses, you give the bar a professional image. Gamko manufactures the bottle cooler & freezer counter top in four variants: for a maximum of ten or twelve 1-litre bottles as a freezer or cooler. The VK/10 model is suitable for inset- and surface-mounting and has a capacity of up to a maximum of ten 1-litre bottles. The VK/12 model has been specially designed for inset and has a capacity of up to a maximum of twelve 1-litre bottles. The interior of both types is made of highgrade stainless steel (AISI 304).

Professional refrigeration for hospitality trade

General characteristics

Bottle cooler & freezer counter top

Plug ready (no separate condensing unit required) For chilling or freezing Cooling capacity 156W * Power consumption 175W* Interior made of high-grade stainless steel Ideal for inset for a professional imago Thermostat Cooling +10° C / +0° C, Freezing +0° C / -15° C

VK/12

Bottle cooler counter top suitable for inset VK/12F

Bottle freezer counter top suitable for inset

VK/10

Bottle cooler counter top suitable for inset and surface-mounting (fitted with rubber feet) VK/10F

Bottle freezer counter top suitable for inset and surface-mounting (fitted with rubber feet)

MODEL FITTING THERMOSTAT EXTERIOR INTERIOR CAPACITY DIMENSION W x D x H DIMENSION W x D x H DIMENSION FOR EXTERNAL INTERNAL INSET W x D

VK/10 VK/10F VK/12 VK/12

Inset** & surface-mounted Inset** & surface-mounted Inset** Inset**

Cooling +10˚C /0˚C Freezing 0˚C /-15˚C Cooling +10˚C /0˚C Freezing 0˚C /-15˚C

* Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C

Chromium steel (AISI 430) Chromium steel (AISI 430) Stainless steel (AISI 304) & Aluzink Stainless steel (AISI 304) & Aluzink

Stainless steel (AISI 304) Stainless steel (AISI 304) Stainless steel (AISI 304) Stainless steel (AISI 304)

10 x 1 litre 10 x 1 litre 12 x 1 litre 12 x 1 litre

510 x 423 x 253mm 510 x 423 x 253mm 501 x 373 x 490mm 501 x 373 x 490mm

- - 350 x 265 x 230mm 350 x 265 x 230mm

499 x 412mm 499 x 412mm 478 x 350mm 478 x 350mm

** Provided adequate ventilation for heat extraction

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GVK-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

Noverta Premium GM-Line

The classic solution in the catering trade Trusted and proven quality New design and green performance Immediately save money on electricity up to 230 euro per year Comes with a natural refrigerant Environmentally friendly Also available with a handy bottle rack Excellent choice in combination with Gamko keg coolers

Gamko GM-Line

Noverta Premium & GM-Line bottle coolers split design

The GM-Line bottle coolers by Gamko have been classic solutions in the catering industry for decades now. Widely praised for their user friendliness thanks to their use amongst other things of the ergonomic handle, their durability, the timeless look and, of course, their excellent cooling performance. But that is not all. Gamko has continues developed and improved this classic solution. Now the GM-Line is also efficient in terms of electricity and environmentally friendly. Gamko titles this new generation of coolers under the name Noverta Premium GM-Line. Gamko manufactures and supplies four variants of the GM-Line. A 1-door cooler, a 2-door cooler and a cooling buffet with 2 doors plus a handy bottle rack in the middle for 8 large bottles. This last variant can also be supplied for a split design complete with a chilled drawer below the bottle rack.

Professional refrigeration for hospitality trade

General characteristics

Noverta Premium GM-Line bottle cooler (plug ready)

Noverta Premium GM-Line

The new generation of Noverta Premium GM-Line bottle coolers will guarantee lower power consumption up to 55% per annum*. The improved design and the use of an environmentally friendly refrigerant mean significantly reduced power consumption**. You immediately reduce the operating costs and at the same time are making an environmentally friendly investment. In the table you can see what you can save in electricity annually with the new Noverta Premium GM-Line.

Plug ready (no separate condensing unit required) Low power consumption Superb cooling performance Natural refrigerant Environmentally friendly Manufacturer's warranty Electronic thermostat with digital display Automatic defrost LED lighting in GM2/2 and GM2/22 Exterior: anthracite coated steel panels Interior: silver-grey coated steel panels Externally identical to Gamko keg coolers Height-adjustable legs Also available with a handy bottle rack Height-adjustable shelves Option: locks on doors (lock feature available for GM2/2 and GM2/22) Thermostat +2° C / +18° C

Annual saving with Noverta Premium GM-Line* Type

Savings In KWh

GM2/2 GM2/22 GM2/212MU

Savings in %

Savings in euro

Savings after 10 years in euro

600 55 120 900 55 180 900 35 180

1200 1800 1800

* Note; All the above calculations have been based on a KWh price of euro 0,20 and tests with Noverta Premium GM-Line coolers and GM-Line coolers ready to plug in under practical conditions (fitted and frequent opening of doors and replenishing with unchilled bottles). ** excl. GM/212VS

GM2/2

Exterior made of anthracite steel panels and fitted with 1 door, as standard left-hinged (right-hinged optional) GM2/212MU

Exterior made of anthracite steel panels and fitted with 2 doors and a bottle rack in the middle

GM2/22

Exterior made of anthracite steel panels and fitted with 2 doors

Additional GM-Line accessories Lock Wire mesh shelf for GM2/2 Wire mesh shelf for GM2/22 Shelf for GM2/212MU & GM/212VS Shelf support clips (4-6 no. per shelf required)

MODEL

GM2/2

GM2/22 GM2/212MU

GM/212VS

Exterior made of anthracite steel panels and fitted with 2 doors and a bottle rack in the middle with a chilled drawer below it. Works in combination with a separate condensing unit (to be ordered separately)

013050219 004010403 004010404 000050300 013010001

LAYOUT

STORAGE CAPACITY

COOLING CAPACITY CONSUMPTION

1x door left-hinged or optional right-hinged

155 x 33 cl (ø60mm)

240W 1 130W 1 +2˚ C / +18˚ C 602 x 565 x 840/870mm

2x single mesh shelves

2x door hinged 2x door hinged & bottle rack

323 x 33 cl (ø60mm) 332 x 33 cl (ø60mm) of 116 x 1/1.5 litres & bottle rack 8x 1/1.5 litres

240W 1 137W 1 +2˚ C / +18˚ C 1110 x 565 x 840/870mm 515W 1 380W 1 +2˚ C / +18˚ C 1670 x 570 x 860/880mm

2x double mesh shelves 4x single shelves

2x door hinged & bottle rack & drawer

380 x 33 cl (ø60mm) of 132 x 1/1.5 litres & bottle rack 8x 1/1.5 litres

GM/212VS

Item number

Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C

450W 1 (optimal)

POWER THERMOSTAT

DIMENSION W x D x H*

# MESH/SHELVES

GREEN

68W 2 +2˚ C / +18˚ C 1670 x 570 x 840/860/880mm 4x single shelves

Power consumption of the cooler excluding the separately installed condensing unit

* When inset: add a minimum of 40mm to the depth and 10mm to the overall width.

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GST-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

ST-Line coolers

Top loader with robust sliding cover Ideal for taking out the contents quickly Available in three sizes and two exteriors Powerful machine unit Large storage capacity Can be offered with your company logo/branding as an option Optionally with wheels and/or printing for a mobile counter

Gamko ST-Line coolers top loaders

In addition to coolers with doors and drawers, Gamko also manufactures and supplies coolers with a handy sliding cover. These spacious top loaders, also referred to as slide top coolers, are plug ready and fit to addition to any bar layout. The slide top cooler provides a good overview onto the stock of bottles and canned drinks from above. As a result you can conveniently and quickly see what you are looking for to ensure smooth service behind the bar, while you maintain eye contact with the customer. Gamko supplies the ST-Line coolers in three sizes: 130 litre, 210 litre and 375 litre capacities. The exterior is made of anthracite-coated steel panels or of chromium steel. The robust sliding cover is made of chromium steel (AISI 430) and is fitted with a lock as standard. The ST-Line coolers are supplied as standard with bottle divider(s), a bottle opener and a collection bin for bottle tops. Castors can also be ordered as an option. The top loader cooler also lends itself perfectly to being fitted with your advertising display. In this way, you can create a handy mobile counter out of the Gamko ST-Line cooler including publicity.

Professional refrigeration for hospitality trade

General characteristics

ST/375

ST-Line

Exterior made of anthracite steel panels with 2 sliding covers made of chromium steel ST/375CS

Exterior made of chromium steel with 2 sliding covers of chromium steel

ST/210

Exterior made of anthracite steel panels with 1 sliding cover made of chromium steel ST/210CS

Exterior made of chromium steel with 1 sliding cover of chromium steel

Plug ready top loader (no separate condensing unit required) Powerful machine unit for short chilling time Automatic defrost Electronic thermostat with digital display Fitted with robust chromium steel sliding cover with lock Fitted with separate drainage outlet for fast and simple cleaning Height-adjustable legs Interior: silver-grey coated steel panels Incl. epoxy-coated bottle dividers Integrated bottle opener and collection bin for bottle caps Option with castors for a mobile counter Possible to put your advertising display around it Thermostat +2° C / +18° C

ST/130

Exterior made of anthracite steel panels with 1 sliding cover made of chromium steel ST/130CS

Exterior made of chromium steel with 1 sliding cover of chromium steel

(Extra) accessories for ST-Line

Item number 019000045 019000046 000030121 264610A31 004010141

Castor without brake* Castor with brake* Extra bottle opener Extra collection bin for bottle caps Extra epoxy-coated bottle divider

* 2 castor wheels with brake and 2 without brake required for ST/130 and ST/210 and 2 castor wheels with brake and 4 without brake for ST/375.

MODEL

# SLIDING COVERS

COLOUR EXTERIOR

STORAGE CAPACITY

1 x chromium steel 1 x chromium steel 1 x chromium steel 1 x chromium steel 2 x chromium steel 2 x chromium steel

anthracite chromium steel anthracite chromium steel anthracite chromium steel

200 x 33cl (ф60mm) 200 x 33cl (ф60mm) 315 x 33cl (ф60mm) 315 x 33cl (ф60mm) 560 x 33cl (ф60mm) 560 x 33cl (ф60mm

ST/130 ST/130CS ST/210 ST/210CS ST/375 ST/375CS

Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C

COOLING POWER CAPACITY CONSUMPTION (1)

271W 1 271W 1 271W 1 271W 1 451W 1 451W 1

THERMOSTAT

DIMENSION W x D x H OUTSIDE on legs

DIMENSIONS W x D x H INSIDE

# bottle DIVIDERS

+2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C

602 x 622 x 920/930mm 602 x 622 x 920/930mm 902 x 622 x 920/930mm 902 x 622 x 920/930mm 1502 x 622 x 920/930mm 1502 x 622 x 920/930mm

518 x 480 x 540mm 518 x 480 x 540mm 818 x 480 x 540mm 818 x 480 x 540mm 1418 x 480 x 540mm 1418 x 480 x 540mm

12 12 22 22 42 42

220W 1 220W 1 242W 1 242W 1 361W 1 361W 1

Extra bottle dividers can also be added: see accessories

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GST-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

Freezers for bottles and glasses

Efficient and powerful cooling system Frozen glasses within a few minutes For ice-cold bottles of liqueur and spirits Outstanding taste experience With heated glass door to prevent condensation Professional display

Gamko glass frosters for bottles and glasses

Gamko manufactures and supplies freezers for inset or fitting on the back bar counter top. These plug ready freezers have been specially developed for rapid freezing of drinks glasses and for giving out ice-cold bottles of liqueur and spirits such as vodka or gin. Thanks to the ultra-efficient cooling system and fan (MF models), within a few minutes you will have access to frozen glasses. By selecting the (heated) glass door, you can also provide an attractive display of bottles of spirits and liqueur. Combined with the correct bottles and/or glasses, you will provide the bar with a professional image. Gamko supplies three variants of freezers for glasses and bottles. Two professional freezers with a capacity of 110 litres, in which the one is fitted with a heated glass door and the other one with a solid, rigid chromium steel door. The third variant is a mini-freezer manufactured out of silver-coloured plastic complete with a special rack for hanging glasses by their base.

Professional refrigeration for hospitality trade

General characteristics

MF/110RCS

glass frosters for bottles and glasses

Exterior made of chromium steel and fitted with solid door, right-hinged

MF/110LCS

Exterior made of chromium steel and fitted with solid door, left-hinged

MF/110RGCS

Exterior made of chromium steel and fitted with heated glass door, right-hinged

Plug ready (no separate condensing unit required) Efficient cooling system Electronic thermostat with digital display Automatic defrost Fitted with 1 door, right-hinged or left-hinged For the model with a glass door: heated glass to prevent the build-up of condensation For the model with a glass door: internal lighting 2 adjustable feet on the front Exchangeable door seals For inset or surface-mounting Thermostat -10° C / -21° C

MF/110LGCS

Exterior made of chromium steel and fitted with heated glass door, left-hinged

Helsinki-S

Exterior made of silver-coloured plastic and fitted with solid door, right-hinged (interchangeable)

Accessories for MF/110CS and MF/110GCS

Item number 004010393 013010001

Extra wire mesh shelf (330 x 486mm) Shelf support clip (4 no. per shelf required)

MODEL DOOR TYPE

INTERNAL VOLUME

STORAGE CAPACITY

MF/110RCS MF/110LCS MF/110RGCS MF/110LGCS HELSINKI-S

80 glasses (ф 6cm) 235W 1 420W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 235W 420W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 350W 650W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 350W 650W 1 -10˚C / -21˚C 10 bottles and 86W 100W -6˚C / -20˚C 40 shot glasses on their base

1 x solid, chromium steel, right-hinged 110 litres 1 x solid, chromium steel left-hinged 110 litres 1 x glass & chromium steel, right-hinged 110 litres 1 x glass & chromium steel, left-hinged 110 litres 1 x solid plastic, right-hinged. 2 80 litres

COOLING POWER THERMOSTAT EXTERIOR INTERIOR CAPACITY CONSUMPTION

chromium steel chromium steel chromium steel chromium steel silver-coloured plastic

DIMENSIONS WxDxH*

silver-grey-coated steel panels silver-grey-coated steel panels silver-grey-coated steel panels silver-grey-coated steel panels white plastic

602 x 514 x 905mm 602 x 514 x 905mm 602 x 514 x 905mm 602 x 514 x 905mm 553 x 611 x 631mm

2 Door supplied as standard right-hinged but is interchangeable (left-hinged)

Conditions: Te = - 25˚C | Tc = + 45˚C | ambient temperature = + 25˚C

* When flush-mounted: add a minimum of 40mm to the depth and 10mm to the overall width.

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GV-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

Flexbar Flexible and multi-purpose modular bar system Configure your ideal bar

With an extensive number of possibilities Create an unique atmosphere with coloured EQUAL-LED lighting Without any obligation and free of charge a custom made project drawing Easy installation

Gamko FLEXBAR modular bar system

Professional refrigeration for hospitality trade

Gamko: the inventors of the modular bar system Back in 1979 Gamko introduced an

With more than 50 years of refrigeration

innovative approach to bar construction:

expertise, right up until now Gamko has

the modular bar installation. For the first

and continues to make reliable and high-

time it was possible to create the most

quality, premium, professional coolers

flexible possible bar using detachable

for the catering industry. And of course

sections, fronts and accessories whilst

the same also applies in respect of our

retaining all the cooling technology

modular bar system. Solid, high-grade,

features. Since this time, Gamko has

thoroughly tested, flexible, ergonomic

continued to develop this unique

and especially attractive in terms of

variant into what it is today: The Gamko

appearance. Find out about Gamko's

FLEXBAR with its unrivalled features.

FLEXBAR.

Because as the name suggests: flexibility is what counts!

General characteristics FLEXBAR configuration

Specify your desired refrigerated and unrefrigerated storage. Create a plug ready modular bar configuration or make it suitable for a split design with an evaporator. Continue to expand with sections in two width measurements: 41 cm and 54 cm. Available in 3 designs: with fronts in anthracite, in stainless steel (AISI 304) and in glass with white LED lighting with even light distribution (patented EQUAL LED). All FLEXBAR fronts have a patented organic external design, are seamless and can easily be cleaned, are robust, solid, sustainable and fit into any interior. Create for instance, a right-angled bar, a curved bar, a bar with doors on both sides or a cocktail bar with professional stainless steel accessories or a combination of these. Make it stand out with coloured LED lighting combined with glass storage segments (patented EQUAL LED). Prevent theft with the Central Electronic Locking System (patented CELS). Create variety with handy extras such as drawers, bottle racks, bottle coolers in the front of the counter top, unrefrigerated sections with rinsing racks and waste bins, coffee-waste drawers and stainless steel (cocktail) accessories. Quick to assemble on site thanks to the Cam Lock system and, where necessary, complete with specific installation instructions. Standard factory warranty with a renewal option including a maintenance agreement for years of worry-free refrigeration. Arrange for your idea, wish list or rough sektch to be professionally drawn up by our project team without obligation and free of charge.

Safety FLEXBAR complies with the most stringent safety requirements All electrical components in the refrigerated sections work at low voltage (24 Volts). In addition, all glazed fronts are fitted with safety glass.

Easy installation The FLEXBAR is fitted as standard with heigh-adjustable feet, which can also be adjusted from the outside. With the Cam Lock system, the detachable sections can be interconnected in situ in no time at all. FLEXBAR installations have been assembled by local fitters right throughout the world.

Ergonomic handle The sturdy, metal handle consists of two components. The aluminium exterior is responsible for the solid build, while the soft touch rubber interior is responsible for excellent grip, even with wet hands.

White and coloured lighting (EQUAL-LED) As standard all glass sections are supplied with white EQUAL-LED lighting. The FLEXBAR can also be supplied with coloured EQUAL-LED lighting. This patented lighting provides an even distribution of light. Using the supplied remote control, you can set the entire bar layout to one colour, allow the colour to automatically follow a routine, dim the light intensity and allow the colour to change. You can get your FLEXBAR lighting to fit in with the lighting plan of the overall room. Lighting is easy to adapt based on the plug & play principle.

Central Electronic Locking System The FLEXBAR can be supplied with a patented and fully integrated with Central Electronic Locking System (CELS). Using the machine unit or evaporator fitted with a lock control, the bar can be fully locked down with one simple action. Straightforward, fast, safe and no section can be overlooked. In addition to the required control on the machine unit or evaporator, each section can be upgraded with its own lock. Locks are easy to adapt based on the plug & play principle.

Handy, robust drawers The solid FLEXBAR drawers are fitted with telescopic steel guides, which ensure that the drawer closes the last few centimetres by itself. Two drawer dividers prevent bottles from falling over when closing or opening. The maximum weight-bearing capacity per drawer is 75 kg. With glass drawers including LED lighting in each drawer front, you can provide a very attractive display for bottled drinks. By leaving the first row of bottles in place when serving, the display always remains beautiful and perfectly intact.

Removable and flexible bottle rack For the refrigerated sections, the bottle rack is included inside a drawer. This makes it easy to clean and can also be interchanged with a normal drawer after being installed. In this way, the depth can be adjusted depending on the bottle size.

A Gamko FLEXBAR in 4 steps Putting together the ideal FLEXBAR may, perhaps, appear to be somewhat complex. Using the 4-step plan below, we will lead you through the many options. Specify your preferences and requirements and Gamko will then help you in devising your plans. We can imagine that you may first have some questions. We will be pleased to answer any questions! You can find our telephone number on the back of this brochure. Don't hesitate in asking for the FLEXBAR check list. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.

A Gamko FLEXBAR in 4 steps Select a machine unit or evaporator unit with the correct control system: • you can build a plug ready configuration with a condensing unit (page 5); • you can build a split design with an evaporator unit (page 5); • make sure you have the correct control system if you are choosing lighting, locks or a combination of the two.

4 3 2 1 STAP

STAP

Connect refrigerated sections to the machine unit or to the evaporator unit and finish it with a set of end panels: • specify your desired refrigerated and unrefrigerated storage capacity • refrigerated sections with door and drawer fronts, - made of anthracite steel panels (page 6) - made of glass with white or coloured EQUAL-LED lighting (page 7) - made of stainless steel (page 8);

• refrigerated sections fitted with bottle rack, bottle bin and Central Electronic Locking

STAP

4 3 2 1

System (CELS);

• refrigerated pass-through sections (page 9); • end panels and in between panels (page 10).

Remember that: • wherever possible, the machine unit or the evaporator unit is installed centrally between the chilled sections; • We recommended a maximum of four refrigerated segments measuring 54cm wide and a maximum of five measuring 41cm per machine unit or evaporator unit; • an evaporator unit can never be left in a right outside position for maintenance reasons; • if you prefer a FLEXBAR with white or coloured EQUAL-LED Lighting LED lighting, then choose segments with a glass front.

Make the FLEXBAR even more complete and attractive with: • separate stand alone cooler and freezer for creating a separate temperature zone (page 11); extra standard accessories (page 11); corner pieces for a curved bar configuration (page 10); unrefrigerated sections with or without a front (page 12); unrefrigerated drawer sections for rinse racks, coffee or waste bin(s); accessories for a cocktail bar (page 13); stainless steel counter tops (page 14).

STAP

4 3 2 1

STAP

• • • • • •

Send your sketch and/or wish list to Gamko:

Based on this, Gamko will draw up a project drawing to provide you with a realistic impression. At the same time, Gamko will provide an appropriate and non-binding quotation. We can imagine that you may have some questions. You can find our telephone number on the back of this brochure. Don't hesitate to ask for the special FLEXBAR form. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.

FLEXBAR machine units X/MU or X/PTMU

Machine units and evaporator units

4 3 2 1

Machine units and evaporator units are the heart of a FLEXBAR installation. The refrigerated sections are connected to this. To be able to ensure that lighting and/or locks operate centrally, you select a type of machine unit or evaporator unit with the Central Electronic Locking System needed for this. Pass-through sections (see also: page 9) work with a special machine unit or evaporator unit fitted with a FLEXBAR front to the front and the rear.

STAP

MACHINE unit (& electr. connection)

STAP

where applicable with Central Electronic Locking System.

Anthracite front(s). Dimensions (W x D x H): 410 x 560 x 860/880mm* or 410 x 600 x 860/880mm* for pass-through sections.

standard machine unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light

ITEM NO.

ITEM NO. IF PASS-THROUGH SEGMENTS

X/MU X/PTMU X/MU-G X/PTMU-G X/MU-GC X/PTMU-G X/MU-K X/PTMU-K X/MU-G-K X/PTMU-G-K X/MU-GC-K X/PTMU-G-K

X/MUS

Front made of stainless steel Dimensions (W x D x H): 410 x 560 x 860/880mm*

MACHINE UNIT (& electr. connection)

ITEM NO.

standard machine unit + lock system

X/MUS X/MUS-K

X/1M

Machine unit fitted with coffee fold out drawer. Anthracite front. Dimensions (W x D x H): 540 x 560 x 860/880mm*

machine unit (& electr. connection)

ITEM NO.

X/1M X/1M-G X/1M-GC X/1M-K X/1M-G-K X/1M-GC-K

standard machine unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light

General characteristics FLEXBAR machine unit & evaporator units

Electronic thermostat with display (+2Ë&#x161;C / +18Ë&#x161;C) Machine unit cooling capacity 656W (optimal) Machine unit power consumption max. 500W / evaporator units max. 80W Machine unit with automatic defrost / evaporation of leak water Also available with a handy bottle rack (anthracite) Manufacturer's warranty Easy to maintain (service-friendly) Example on python tubing Height-adjustable legs Option: drive system for locks and/or lighting Option: fronts to front and rear (for pass-through sections)

FLEXBAR evaporator units (split design) X/VS20 or X/PTVS20

Anthracite front(s). Dimensions (W x D x H): 200 x 560 x 860/880mm* or 200 x 600 x 860/880mm* for pass-through sections. EVAPORATOR UNIT (& electr. connection)

ITEM NO.

X/VS20 X/PTVS20 X/VS20-G X/PTVS20-G X/VS20-GC X/PTVS20-GC X/VS20-K X/PTVS20-K X/VS20-G-K X/PTVS20-G-K X/VS20-GC-KX/PTVS20-GC-K

standard evaporator unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light

ITEM NO. IF PASS-THROUGH SECTIONS

X/VSS20

Front made of stainless steel Dimensions: (W x D x H): 200 x 560 x 860/880mm* EVAPORATOR UNIT (& electr. connection) ITEM NO.

standard evaporator unit + lock system

X/VSS20 X/VSS20-K

* Each bar configuration: add 40mm to the depth and 10mm to the overall width.

General characteristics Refrigerated segments with anthracite front

Refrigerates in combination with machine unit / evaporator unit (page 5) Available with door, drawers and bottle rack with drawer As standard two adjustable shelves with segments supplied with door Height-adjustable feet from inside Available in width dimensions: 41cm and 54cm Depth and height standard for each section: 560 x 860/880mm** Option: Central Electronic Locking System

STAP

4 3 2 1

Refrigerated segments with an anthracite front are available in the variants set out below and in two width dimensions: 41 cm and 54 cm wide.

Illustrated segments 54cm wide. Also available in 41 cm wide.

X/2LA X/3DA X/3DH X/5DA X/6DA X/ 6DHA X/7DA

Item numbers and specific features of refrigerated segments with anthracite front LAYOUT SEGMENTS

WIDTH

ITEM NO.

54cm

X/2LA54 X/2LA54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

door left-hinged

KEG STORAGE CAPACITY

door left-hinged

41cm

X/2LA41 X/2LA41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

door right-hinged

54cm

X/2RA54 X/2RA54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

door right-hinged

41cm

X/2RA41 X/2RA41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

2 x ½ drawers

54cm

X/3DA54 X/3DA54K

98 x 33cl / 40 x 1-1.5 L *

2 x ½ drawers

41cm

X/3DA41 X/3DA41K

68 x 33cl / 30 x 1-1.5 L*

bottle rack & ½ drawer

54cm

X/3DHBA54 X/3DHBA54K

49 x 33cl & 8 x 1-1.5 L* / 28 x 1-1,5 L*

bottle rack & ½ drawer

41cm

X/3DHBA41 X/3DHBA41K

34 x 33cl & 6 x 1-1.5 L* / 21 x 1-1.5 L*

5/12 drawer & 7/12 drawer

54cm

X/5DA54 X/5DA54K

98 x 33cl / 40 x 1-1.5 L*

5/12 drawer & 7/12 drawer

41cm

X/5DA41 X/5DA41K

68 x 33cl / 30 x 1-1.5 L*

3 x 1/3 drawer

54cm

X/6DA54 X/6DA54K

147 x 33cl*

3 x 1/3 drawer

41cm

X/6DA41 X/6DA41K

102 x 33cl*

bottle rack & 2 x 1/3 drawer

54cm

X/6DHBA54 X/6DHBA54K

98 x 33cl & 4 x 1-1.5 L*

bottle rack & 2 x 1/3 drawer

41cm

X/6DHBA41 X/6DHBA41K

68 x 33cl & 3 x 1-1.5 L*

1/3 drawer & 2/3 drawer

54cm

X/7DA54 X/7DA54K

98 x 33cl / 49 x 33cl & 20 x 1-1.5 L*

1 x 30 L

1/3 drawer & 2/3 drawer

41cm

X/7DA41 X/7DA41K

68 x 33cl / 34 x 33cl & 15 x 1-1.5 L*

* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.

ITEM NO. WITH LOCK BOTTLE STORAGE CAPACITY

** Each bar configuration: add 40mm to the depth and 10mm to the overall width.

General characteristics Refrigerates in combination with machine unit / evaporator unit (page 5) As standard designed with energy-saving, white EQUAL-LED lighting: 1 for each drawer and 2 per door (excludes control system) Anthracite-coloured bezel around fronts Safety glass Available with door and with drawers As standard two adjustable shelves with section supplied with door Height-adjustable feet from inside Available in width dimensions: 41cm and 54cm Depth and height standard for each section: 560 x 860/880mm** Option: coloured EQUAL-LED lighting Option: Central Electronic Locking System

Refrigerated segments with glazed front

are available in the variants set out below and in two width dimensions: 41 cm and 54 cm wide.

STAP

4 3 2 1

Refrigerated segments with a glazed front

Illustrated segments 54cm wide. Also available in 41 cm wide.

X/2LG X/3DG X/5DG X/6DG X/7DG

Item numbers and specific features of refrigerated segments with glazed front LAYOUT SEGMENTS WIDTH ITEM NO. WHITE ITEM NO. COLOURED ITEM NO. WHITE ITEM NO. COLOURED LIGHTING LIGHTING LIGHTING & LOCK LIGHTING & LOCK

X/2LG54

door left-hinged

54cm

door left-hinged

41cm

door right-hinged

54 cm

door right-hinged

41cm

X/2RG41

2 x ½ drawers

54cm

X/3DG54

2 x ½ drawers

41cm

X/3DG41

5/12 drawer & 7/12 drawer 54cm

X/5DG54

5/12 drawer & 7/12 drawer 41cm

X/5DG41

3 x 1/3 drawer

54cm

X/6DG54

3 x 1/3 drawer

41cm

X/6DG41

1/3 drawer & 2/3 drawer

54cm

X/7DG54

1/3 drawer & 2/3 drawer

41cm

X/2LG41

X/2RG54

X/7DG41

X/2LGC54 X/2LGC41

X/2RGC54 X/2RGC41 X/3DGC54 X/3DGC41 X/5DGC54 X/5DGC41 X/6DGC54 X/6DGC41 X/7DGC54 X/7DGC41

* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.

STORAGE CAPACITY BOTTLES

STORAGE CAPACITY KEGS

X/2LGC54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

X/2LGC41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

X/2RGC54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

X/2RG41K

X/2RGC41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

X/3DG54K

X/3DGC54K

98 x 33cl / 40 x 1-1.5 L*

X/3DG41K

X/3DGC41K

68 x 33cl / 30 x 1-1.5 L*

X/5DG54K

X/2LG54K X/2LG41K

X/2RG54K

X/5DGC54K

98 x 33cl / 40 x 1-1.5 L*

X/5DG41K

X/5DGC41K

68 x 33cl / 30 x 1-1.5 L*

X/6DG54K

X/6DGC54K

147 x 33cl*

X/6DG41K

X/6DGC41K

102 x 33cl*

X/7DG54K

X/7DGC54K

98 x 33cl / 49 x 33cl & 20 x 1-1.5 L* 1 x 30 L

X/7DGC41K

68 x 33cl / 34 x 33cl & 15 x 1-1.5 L* -

X/7DG41K

** Each bar configuration: add 40mm to the depth and 10mm to the overall width.

General characteristics Refrigerated segments with stainless steel front

Refrigerates in combination with machine unit / evaporator unit (page 5) Available with door and with drawers Fronts made completely of stainless steel and without seams (hygiene) Available in width dimensions: 41cm and 54cm As standard two adjustable shelves supplied with door Height-adjustable feet from inside Depth and height standard for each section: 560 x 860/880mm** Option: Central Electronic Locking System

steel front are available in the variants set

STAP

4 3 2 1

Refrigerated segments with a stainless

out below and in two width dimensions: 41 cm and 54 cm wide.

Illustrated segments 54cm wide. Also available in 41 cm wide.

X/2RS X/3DS X/5DS X/6DS X/7DS

Item numbers and specific features of door and drawer sections with stainless steel front LAYOUT SEGMENTS

WIDTH

ITEM NO.

door left-hinged

54cm

door left-hinged

door right-hinged

BOTTLE STORAGE CAPACITY

KEG STORAGE CAPACITY

X/2LS54 X/2LS54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

41cm

X/2LS41 X/2LS41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

54cm

X/2RS54 X/2RS54K

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

door right-hinged

41cm

X/2RS41 X/2RS41K

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

2 x ½ drawer

54cm

X/3DS54 X/3DS54K

98 x 33cl / 40 x 1-1.5 L *

2 x ½ drawer

41cm

X/3DS41 X/3DS41K

68 x 33cl / 30 x 1-1.5 L*

5/12 drawer & 7/12 drawer

54cm

X/5DS54 X/5DS54K

98 x 33cl / 40 x 1-1.5 L*

5/12 drawer & 7/12 drawer

41cm

X/5DS41 X/5DS41K

68 x 33cl / 30 x 1-1.5 L*

3 x 1/3 drawer

54cm

X/6DS54 X/6DS54K

147 x 33cl*

3 x 1/3 drawer

41cm

X/6DS41 X/6DS41K

102 x 33cl*

1/3 drawer & 2/3 drawer

54cm

X/7DS54 X/7DS54K

98 x 33cl / 49 x 33cl & 20 x 1-1.5 L*

1 x 30 L

1/3 drawer & 2/3 drawer

41cm

X/7DS41 X/7DS41K

68 x 33cl / 34 x 33cl & 15 x 1-1.5 L*

* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.

ITEM NO. WITH LOCK

** Each bar configuration: add 40mm to the depth and 10mm to the overall width.

General features of pass-through segments Refrigerated pass-through segments

Refrigerates in combination with machine unit / evaporator unit (page 5) Works combined with special machine unit / evaporator unit fitted with double front Glazed front designed as standard with white EQUAL-LED lighting (excl. control system) Available in width dimensions: 41cm and 54cm As standard two adjustable shelves supplied per segment Height-adjustable feet from inside Depth and height standard for each section: 600 x 860/880mm (deeper than standard sections)* Option: coloured EQUAL-LED lighting Option: Central Electronic Locking System

Refrigerated pass-through segments are

available in five door combinations and in

STAP

4 3 2 1

STAP

(door on both sides)

two width dimensions: 41 cm and 54 cm wide

The Gamko FLEXBAR can also be assembled using pass-through segments. There is a door on the refrigerated segments both at the front and at the rear. The associated machine unit / evaporator unit is also fitted with 2 fronts (see page 5). The advantage of pass-through segments is that the bar can be served from 2 sides. This means that the bar is used more creatively and functionally. Take for example: • an additional bar installation between the front bar and back bar. Products can be viewed and taken out from 2 sides; • a front bar, which displays drinks at the front that can easily be taken out by staff walking round serving customers. Drinks can be replenished from behind the bar based on the first in-first out principle; • a back bar, which can be opened at the back into an adjoining coldroom at the rear. Chilled drinks can be replenished directly via the coldroom; • a bar installation with glass doors to the front and solid doors to the rear.

Item numbers and specific features of refrigerated pass-through segments

FRONT WIDTH PASS- LED ITEM NO. PASS- COMBINATION THROUGH SECTION LIGHTING TROUGH SECTION **

ITEM NO. DOOR 1

ITEM NO. DOOR 2

anthracite-anthracite 54cm

X/PTS54S

X/FRONTRA54 X/FRONTLA54

anthracite-anthracite 41cm

X/PTS41S

X/FRONTRA41 X/FRONTLA41

54 cm

white

X/PTS54G

X/FRONTRA54 X/FRONTLG54

anthracite-glass

41cm

white X/PTS41G

X/FRONTRA41 X/FRONTLG41

anthracite-glass

54cm

coloured X/PTS54GC

X/FRONTRA54 X/FRONTLG54

anthracite-glass

41cm

coloured X/PTS41GC

X/FRONTRA41 X/FRONTLG41

glass-glass

54cm

white X/PTG54G

X/FRONTRG54 X/FRONTLG54

glass-glass

41cm

white X/PTG41G

X/FRONTRG41 X/FRONTLG41

glass-glass

54cm

coloured X/PTGC54GC

X/FRONTRG54 X/FRONTLG54

glass-glass

41cm

coloured X/PTGC41GC

X/FRONTRG41 X/FRONTLG41

anthracite-glass

** Option with Central Electronic Locking System on request. 9

End panels and in between panels STAP

STAP

4 3 2 1

End panels End panels are always needed for insulation and / or finish the total bar configuration. Using them, a refrigerated installation starts and ends as standard with a 4cm thick, insulated end panel. If there should be insufficient room, then exceptionally a 2cm thick, insulated end panel will also suffice. An non-refrigerated installation starts and ends with a non-insulated end panel. End panels can be supplied in 2 designs: anthracite and stainless steel.

In between panels In between panels are used between linked segments. An insulated in between panel is used to create separate temperature zones. A non-insulated panel is used to separate refrigerated zones from one another, for example: when using multiple machine units in one bar, for waste bins (to prevent odours).

Panel type

End panel refrigerated sections, 4cm thick insulation (2) End panel refrigerated sections, 4cm thick insulation (2) End panel refrigerated sections, 2cm thick insulation (2) End panel refrigerated sections, 2cm thick insulation (2) End panel for unrefrigerated sections (2) End panel for unrefrigerated sections (2) In between panel insulated In between panel non-insulated

Corner pieces for a curved bar

4 3 2 1 STAP

STAP

Gamko also manufactures and supplies special corner pieces used when building a round or curved FLEXBAR installation. These insulated corner pieces allow the cold air through and are precisely custom-made to the desired radius (item number: X/ CURVE). Given the accuracy required for such an installation, this is exclusively a custom application. Contact Gamko for their personal recommendation and quotation.

Colour

Item No.

anthracite stainless steel anthracite stainless steel anthracite stainless steel silver-grey stainless steel

X/EPA04 (set) X/EPC04 (set) X/EPA02 (set) X/EPC02 (set) X/EPA00 (set) X/EPC00 (set) X/TP02 X/TPC00

General characteristics Separate cooler and freezer (stand-alone) STAP

within the bar installation.

Plug ready (no separate condensing unit required) Chilling or freezing with left- or right-hinged door Available with glazed front and with anthracite front Supplied as standard with lock and white EQUAL-LED lighting Electronic thermostat with display 464W cooling capacity and power consumption of 425W Defrost / leak water: automatic / electric evaporation Volume 74 litres and storage capacity of 35 x 33cl or 20 x 1 litres or 1.,5 litres Option: coloured EQUAL-LED lighting (control system needed)

A FLEXBAR installation can be expanded with a separate cooler or freezer. These standalone sections have their own machine unit and are therefore plug ready. With this separate cooler or freezer you can easily create a separate temperature zone within the bar installation. The cooler and freezer can be supplied with glazed front fitted with an anthracite-coloured bezel and with a sealed anthracite front. DESIGN

ITEM NO. GLAZED FRONT

cooler door left-hinged

X/SCLG X/SCLGC

X/SCLA

cooler door right-hinged

X/SCRG X/SCRGC

X/SCRA

DESIGN

ITEM NO. GLAZED FRONT

ITEM NO. ANTHRACITE FRONT

freezer door left-hinged

X/SFLG X/SFLGC

X/SFLA

freezer door right-hinged

X/SFRG X/SFRGC

X/SFRA

ITEM NO. GLAZED FRONT & COLOURED LIGHTING

ITEM NO. ANTHRACITE FRONT

Extra standard accessories

4 3 2 1 STAP

STAP

Door sections are fitted as standard with 2 shelves. Drawer sections are fitted as STAP

STAP

4 3 2 1

Easily create a separate temperature zone

standard with 2 drawer dividers per drawer and divide the drawer widthways. Additional shelves with or without upstand, drawer dividers, wire wine racks, wire meshes and a reinforced floor for if you are loading kegs, can all be ordered separately.

Accessories

Item No.

X/ACSH54 X/ACSH41 X/ACCK54 X/ACCK41 004010405 X/ACWCK54 X/ACWCK41 013010001 X/ACSB X/ACDD54 X/ACDD41 X/ACKR54 X/ACKR41

Shelf 54-section Shelf 41-section Wire mesh shelf 54-section Wire mesh shelf 41-section Extra mesh separate cooler/freezer Wire wine rack 54-section Wire wine rack 41-section Shelf brackets/mesh brackets (4 No. per shelf/wire mesh needed) Shelf upstand (at sides) Drawer divider 54-section (divide the drawer widthways) Drawer divider 41-section (divide the drawer widthways) Reinforced keg floor 54-section Reinforced keg floor 41-section

General characteristics Non-refrigerated segments STAP

STAP

4 3 2 1

Make the FLEXBAR complete with

Segments for non-refrigerated storage Can be supplied with rinser racks, waste bins, speed rails and other cocktail accessories Can be supplied with and without front and with drawers In two designs: anthracite or stainless steel Available in width dimensions: 41cm and 54cm (depending on the design) Height-adjustable feet from inside Depth and height standard for each section: 560 x 860/880mm**

non-refrigerated segments. Ideal for

storing waste bins and rinser racks, for instance, out of view.

X/OS

X/OSD

X/2DA

X/2DS

X/6DMA

X/7DMS

Item numbers and specific features of unrefrigerated sections LAYOUT SECGMENTS WIDTH COLOUR ITEM NO.

STORAGE CAPACITY BOTTLE

STORAGE CAPACITY KEG

ITEM NO. FOR SEGMENTS WITH DOOR / ITEM NO. WASTE BINS

open front with 2 shelves

54cm

anthracite

X/OS54

189 x 33cl / 58 x 1-1.5 L*

3 x 20 L / 1x 30-50 L

door anthracite: X/PLS54 door stainless steel: X/PLS54S

open front with 2 shelves

41cm

anthracite

X/OS41

147 x 33cl / 40 x 1-1.5 L*

2 x 20 L

door anthracite: X/PLS41 door stainless steel: X/PLS41S

open front with 3 drawers for rinser racks 500 x 500mm

54cm

anthracite

X/ODISH50 -

1/1 drawer

54cm

anthracite

X/2DA54 -

Waste bin: X/ACWB54M or X/ACWB54L or X/ACWB54XL

1/1 drawer

41cm

anthracite

X/2DA41 -

Waste bin: X/ACWB41M or X/ACWB41L or X/ACWB41XL

1/1 drawer

54cm

stainless steel X/2DS54 -

1/1 drawer

41cm

stainless steel X/2DS41 -

3 x 1/3 drawer

41cm

anthracite

X/6DMA

68 x 33cl

3 x 1/3 drawer

41cm

stainless steel X/6DMS

68 x 33cl

1 x 1/3 drawer and 1 x 2/3drawer

41cm

anthracite

X/7DMA

68 x 33cl or 15 x 100cl

Waste bin: X/ACWB41M

1 x 1/3 drawer and 1 x 2/3drawer

41cm

stainless steel X/7DMS

68 x 33cl or 15 x 100cl

Waste bin: X/ACWB41M

* Add bar configuration: add 40mm to the depth and 10mm to the overall width.

I D

Accessories for a cocktail bar STAP

STAP

4 3 2 1

In addition to the refrigerated segments

B E

and non-refrigerated segments , Gamko also supplies a range of professional

stainless steel accessories to make a bar a professional cocktail bar.

Accessories for a cocktail bar COCKTAIL ACCESSORIES ITEM NO.

DIMENSIONS EXTERNAL W x D X H

DIMENSIONS INTERNAL W x D x H

DIMENSIONS FLUSH-MOUNTED W X D

insulated stainless steel bin, flush-mounted with drain, 54 section

X/ACIICE54

434 x 434 x 296mm

344 x 344 x 244mm

415 x 415mm

insulated stainless steel bin, flush-mounted with drain, 41 section

X/ACIICE41

304 x 434 x 296mm

214 x 344 x 244mm

285 x 415mm

speed rail single 54 section

X/ACSP54

540 x 134 x 250/90mm

speed rail single 41-section

X/ACSP41

410 x 134 x 250/90mm

speed rail double 54-section

X/ACSP108

1080 x 134 x 250/90mm

speed rail double 41-section

X/ACSP82

820 x 134 x 250/90mm

XL speed rail 54-section

X/ACSPXL54

540 x 253 x 250/25mm

XL speed rail 41-section

X/ACSPXL41

410 x 253 x 250/25mm

bin divider

X/ACBD

sliding cover for bin 54-section

X/ACST54

sliding cover for bin 41-section

X/ACST41

bottle rack 54-section

X/ACBB54

bottle rack 41-section

X/ACBB41

rack for gastro 1/6 bins

X/ACTRAY

bottle opener

000030121

storage bin for caps

264610A31

stainless steel waste bins for non-refrigerated segments 1 bin measuring 400 x 410 x420mm/69 litres 1 bin measuring 400 x 410 x690mm/113 litres 1 bin measuring 270 x 410 x 420mm/46 litres 1 bin measuring 270 x 410 x 690mm/76 litres

STAP

4 3 2 1

WASTE BIN CONTAINER OPTIONS (W x D x H)

Item No. X/ACWB54M X/ACWB54XL X/ACWB41M X/ACWB41XL

Total Bar Solutions Each customer is unique and each bar is unique. Therefore Gamko is specialized at custom made Total Bar Solutions. Today Gamko helps you to impress your customer by making unique bar design proposals.

Stainless steel bar tops

By using tools like 3D impressions and an extended questionnaire, Gamko is trying to involve the end customer in the design process. In this way the customer can participate in the process to realize their wishes.

STAP

to suit the design of the bar.

STAP

4 3 2 1

Gamko supplies stainless steel bar tops The bar tops are made with stainless

steel (AISI 304). The stainless steel bar tops can be fitted with a drip tray and with upstand.

Back bar On many bar locations the customer has got a view of the back bar. By using the white and coloured EQUAL LEDlighting in combination with the glass storage segments you will create a prefect and special atmosphere.

General features Seamless Curves achieved for circular bars Bottom reinforced with wood

Project Badpaviljoen I Domburg

Front Bar The service side of the bar is ideal to equip with a professional cocktailstation which can be assembled with a large range of cocktail acessories to achieve a professional workplace for the employees. Project Teerkamer I Bergen op Zoom

When you contact us in the very initial phase of a project we are able to assist you in this process. Just follow our four steps... For more information you can check the website www.gamko.com or contact Gamko by email or phone.

Send your sketch and/or wish list to Gamko

STAP

4 3 2 1

Contact Gamko and arrange for your idea, wish list or rough sketch to be professionally drawn up by our project team without obligation and free of charge. In this you can be sure that you aren't forgetting anything and all of your ideas can be implemented down to the last detail. We can imagine that you may first have some questions. Call Gamko for help from one of our advisers. Don't hesitate to ask for the FLEXBAR check list. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.

Gamko Export T +31 (0)76 - 508 7500 14

E sales@gamko.nl

Storage Capacity Flexbar

FLEXBAR 41-SECTIONS Drawer section - per drawer 45 x 20 cl.

(bottle Ø 50 mm)

36 x 25 cl.

(bottle Ø 58 mm)

40 x 20 cl.

24 x 33 cl.

(bottle Ø 53 mm)

(bottle Ø 66 mm)

34 x 33 cl.

(bottle Ø 60 mm)

23 x 50 cl.

15 x 100/150 cl.

30 x 50 cl.

20 x 100/150 cl.

(bottle Ø 70 mm)

(bottle Ø 88 mm)

11 x 200 cl.

(bottle Ø 105 mm)

Door section - per shelf 64 x 20 cl.

(bottle Ø 50 mm)

49 x 25 cl.

(bottle Ø 58 mm)

59 x 20 cl.

36 x 33 cl.

(bottle Ø 53 mm)

(bottle Ø 66 mm)

49 x 33 cl.

(bottle Ø 60 mm)

(bottle Ø 70 mm)

(bottle Ø 88 mm)

12 x 200 cl.

(bottle Ø 105 mm)

FLEXBAR 54-SECTIONS Drawer section - per drawer 72 x 20 cl.

(bottle Ø 50 mm)

49 x 25 cl. (bottle Ø 58 mm) or 49 x 33 cl. (bottle Ø 60 mm)

63 x 20 cl.

(bottle Ø 53 mm)

36 x 33 cl.

(bottle Ø 66 mm)

35 x 50 cl.

20 x 100/150 cl.

42 x 50 cl.

29 x 100/150 cl.

(bottle Ø 70 mm)

(bottle Ø 88 mm)

16 x 200 cl.

(bottle Ø 105 mm)

Drawer section - per shelf 80 x 20 cl.

(bottle Ø 50 mm)

63 x 25 cl. (bottle Ø 58 mm) or 63 x 33 cl. (bottle Ø 60 mm)

80 x 20 cl.

(bottle Ø 53 mm)

48 x 33 cl.

(bottle Ø 66 mm)

(bottle Ø 70 mm)

(bottle Ø 88 mm)

20 x 200 cl.

(bottle Ø 105 mm)

Gamko manufactures and supplies professional coolers for the bar and leisure industry Gamko is a leading manufacturer and supplier of professional coolers for the bar and leisure industry. Since its establishment in 1958, Gamko has grown into an international company, which focuses mainly on manufacturing, selling and maintaining a complete range of professional drinks coolers.

Quality from Europe With its own production and a research department in Etten-Leur, The Netherlands, Gamko develops, manufactures and supplies products that are tailored to the needs and quality requirements of todayâ&#x20AC;&#x2122;s catering industry. Aspects such as design, functionality, customer satisfaction and the environment play a major role in this. Gamko is ISO9001- and ISO14001certified, guaranteeing the quality of our products and processes and ensuring continuous improvement. Modern production of equipment guarantees an excellent price-quality ratio and because production takes place in the Netherlands, Gamko also has highly flexible delivery times. If you choose Gamko, then you will be choosing quality, flexibility and sustainability.

Gamko: an international player with world-class products Gamko has its own export department with a worldwide network of agents and its own sales organisations in the Benelux, the United Kingdom and France. Our sales organisation delivers a complete range of cooling equipment, in particular for the bar and leisure industry right throughout the world. If after reading this brochure and/or documentation you would like more information about the products listed below, please feel free to contact Gamko.

Gamko manufactures and supplies (see also www.gamko.com)

FLEXBAR: modular (cocktail) bar system with unlimited options ECO-Line: bottle coolers with glass doors, solid doors and drawers Maxiglass: bottle coolers with glass and solid doors Coolers for kegs and /or crates of bottles Counter top coolers and freezers Bottles and/or glass freezers Stainless steel countertops Remote condensing units Refrigerated display cabinets Waste disposal coolers Slide top coolers

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GX-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

Noverta Premium Keg Coolers

Green keg cooling systems Immediately save money on power consumption up to 57% per year Environmentally friendly Comes with a natural refrigerant Quickly achieve the correct beer temperature for the best taste experience All stored kegs guaranteed to be the same temperature Excellent choice combined with the Gamko GM-Line

Gamko keg coolers

Noverta Premium keg coolers & panel construction keg coolers

Professional refrigeration for hospitality trade

Keg coolers

FK20/2

from Gamko

½-door keg cooler with machine unit to right

Gamko manufactures and supplies premium quality coolers for kegs and/

FK2-25/4R

or crates. Gamko supplies 2 ranges of

1-door keg cooler with machine unit to right

keg coolers: keg coolers for under the bar and panel construction keg coolers.

FK2-25/4L

The keg coolers for fitting under the bar

1-door keg cooler with machine unit to left

are green, energy-saving keg coolers and are marketed under the name of Noverta Premium. The panel construction keg coolers are specially developed for concealed installation and/or in difficultto-access places.

Noverta Premium Keg Coolers The Noverta Premium keg coolers are green coolers, which means they are energy efficient and environmentally friendly**. The keg coolers have their own condensing unit, fit under the bar, are easy to maintain and are also fitted with automatic defrost, LED lighting, lock feature, electronic thermostat and an extra robust baseplate. Gamko supplies 4 variants, in which the machine unit can be positioned to the right or left.** www.gamko.com

Noverta Premium Keg Cooler The new generation of Noverta Premium keg coolers will guarantee lower power consumption up to 57% per annum*. The improved design and the use of a new natural refrigerant result in a significantly reduced power consumption **. You immediately reduce the operating costs and at the same time are making an environmentally friendly investment. Of course, you can count on outstanding performance in terms of the perfect beer temperature and trusted quality, which you can expect from Gamko. In the table below you can see what you can save in electricity annually with the new Noverta Premium keg coolers. Annual savings with Noverta Premium keg coolers* Type

Savings In KWh

FK2-25/4 FK2-25/6 FK2-25/8

Savings in %

Savings in euro

Savings after 10 years in euro

850 56 170 900 57 180 700 43 140

1700 1800 1400

* Calculations are based on a KWh price of euro 0,20 (average European energy price) and tests conducted on recently produced Gamko coolers under practical circumstances (built-in and frequent opening of doors and replenishment with non-refrigerated bottles). ** excl. FK20/2

General features

Noverta Premium keg coolers

Plug ready (no separate condensing unit required) Revolutionary low power consumption Very short cooling time Environmentally friendly Natural refrigerant Manufacturer's warranty Low-energy LED lighting Electronic thermostat with digital display Automatic defrost Interior: silver-grey coated steel panels Exterior: anthracite coated steel panels Handy wide silver-coloured handle Reinforced baseplate Lock feature (lock has to be ordered separately) Consistent temperature of the kegs in relation to one another Obstacle-free, thanks to the omission of any mullion Insertion of python line possible on both sides Maintenance/replacement of machine unit possible without dismantling lines Fitting possible under sink, both to the left and right Externally height-adjustable legs Exchangeable door seals Thermostat Cooling +2° C / +18° C

FK2-25/6L

1½-door keg cooler with machine unit to left FK2-25/6R

1½-door keg cooler with machine unit to right

FK2-25/8R

2-door keg cooler with machine unit to right FK2-25/8L

2-door keg cooler with machine unit to left

Panel construction keg coolers & matching condensing units

General characteristics panel construction keg coolers with machine unit

Gamko panel construction keg coolers

The coolers can be supplied in five

are supplied as ready-to-assemble

variants in terms of storage capacity.

panels. In this way, they can also

The keg coolers are always combined

be installed in difficult-to-access

with the plug ready FK/MU of FK/MUP

places, such as a cellar. A installer

machine unit. The FK/MUP as well as

assembles the keg cooler for your in

cooling kegs, also guarantees chilling

situ and fits the condensing unit. Panel

the water in the python line system

construction keg cabinets are also

to the tap. A Gamko machine unit is

ideally suited for pre-chilling kegs and/

always fitted on the top of the cooler

or crates or bottle drinks.

for optimal distribution of cold air.

Works in combination with a machine unit FK/MU or FK/MUP (plug ready) Supplied in properly packaged panels and installed together with machine unit by installer Ideal for difficult-to-access places Manufacturer's warranty Electronic thermostat Automatic defrost Exchangeable door seals Interior: silver-grey coated steel panels Exterior: anthracite coated steel panels Reinforced stainless steel baseplate with upstand on three sides for easy cleaning Easy to maintain (service-friendly)

Type of keg cooler panel construction Storage capacity of kegs (DIN) FK/2 FK/4 FK/6 FK/8 FK/10

2 x 50 litres or 4 x 30 litres or 8 x 20 litres 4 x 50 litres or 8 x 30 litres or 13 x 20 litres 6 x 50 litres or 12 x 30 litres or 19 x 20 litres 8 x 50 litres or 16 x 30 litres or 26 x 20 litres 10 x 50 litres or 20 x 30 litres or 30 x 20 litres

Type of condensing unit

Feature

FK/MU FK/MUP

for kegs/crates for kegs/crates/python lines

Specific features keg coolers

MODEL

# DOORS

machine unit

STORAGE CAPACITY (DIN-KEG) THERMOSTAT COOLING CAPACITY

POWER CONSUMPTION

FK20/2 FK2-25/4R FK2-25/4L FK2-25/6R FK2-25/6L FK2-25/8R FK2-25/8L

½ door 1 door 1 door 1 ½ door 1 ½ door 2 doors 2 doors

right right left right left right left

2 x 20 L 1 x 50 L of 4 x 20 L 1 x 50 L of 4 x 20 L 1 x 50 L & 2 x 20 L or 6 x 20 L 1 x 50 L & 2 x 20 L or 6 x 20 L 1 x 50 L & 4 x 20 L or 8 x 20 L 1 x 50 L & 4 x 20 L or 8 x 20 L

+2° C / +18° C +2° C / +18° C +2° C / +18° C +2° C / +18° C +2° C / +18° C +2° C / +18° C +2° C / +18° C

245W 262W 1 262W 1 262W 1 262W 1 262W 1 262W

1 1 1 1 1

555 x 590 x 848/860* 880 x 590 x 860/880mm* 880 x 590 x 860/880mm* 1110 x 590 x 860/880mm* 1110 x 590 x 860/880mm* 1350 x 590 x 860/880mm* 1350 x 590 x 860/880mm*

FK/2 FK/4 FK/6 FK/8 FK/10

2 doors 2 doors 2 doors 2 doors 2 doors

- - - - -

2 x 50 L or 4 x 30 L or 8 x 20 L 4 x 50 L or 8 x 30 L or 8 x 20 L 6 x 50 L or 12 x 30 L or 8 x 20 L 8 x 50 L or 16 x 30 L or 8 x 20 L 10 x 50 L or 20 x 30 L or 8 x 20 L

- - - - -

1060 x 713 x 1080/1100mm 1060 x 980 x 1080/1100mm 1465 x 980 x 1080/1100mm 1870 x 980 x 1080/1100mm 2200 x 980 x 1080/1100mm

- -

- incl. python pump

- -

FK/MU - FK/MUP -

Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C

* When installed: Add on 10mm to the overall depth and width.

271W 541W 541W 541W 541W 541W 541W

463W 1 385W 1 587W 1 510W 2

Thermostat: - 3˚C tot + 8˚C (python line) | Thermostat +2˚C / +18˚C (keg cooler)

DIMENSIONS W x D x H

612 x 523 x 310mm 870 x 523 x 370mm incl. pump

GREEN

Gamko manufactures and supplies (see also www.gamko.com)

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.com

GFK-V1-01/13

No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013

Maxiglass Noverta

Green professional coolers Reduced power consumption Environmentally friendly New design Maximum presentation Available with anthracite or stainless steel door frame and kick plate

Gamko Maxiglass Noverta bottle coolers

Professional refrigeration for hospitality trade

Maxiglass Noverta bottle cooler

MG1/140RGCS

by Gamko

840/850mm

Fitted with a hinged glass door with a stainless steel door frame (clockwise) and kick plate. Exterior made of anthracite steel panels

Maxiglass coolers with glass doors are specially designed to present bottled drinks in an aesthetically pleasing manner, reach the perfect temperature, and maintain it. Thanks to the Maxiglass cooler, the beverage inside the bottle is always served at the correct temperature, and the taste and quality is

840/850mm

guaranteed. Maxiglass bottle coolers are available as an under counter model with green properties (a maximum capacity of 315 litres and 3 doors) and as a tall upright model (a maximum capacity of

MG1/140LGCS

500 litres and 2 doors).

MG1/150RGCS

Fitted with a hinged glass door with a stainless steel door frame (anticlockwise) and kick plate. Exterior made of anthracite steel panels

www.gamko.com

Fitted with a hinged glass door with a stainless steel door frame (clockwise) and kick plate. Exterior made of anthracite steel panels

MG1/150LGCS

Fitted with a hinged glass door with a stainless steel door frame (anticlockwise) and kick plate. Exterior made of anthracite steel panels

Maximum presentation and minimum power consumption with the Maxiglass Noverta. The under counter models of the Maxiglass bottle cooler have been fully modernised and improved inside and out. A modern and sleek design combined with improved technologies and components means that the Maxiglass isn’t just a fantastic product because of the way in which it presents its contents, but also because it cools beverages in bottles and/or cans in an energy-efficient manner. We present this green series under the name ‘Maxiglass Noverta’ and guarantee that its lower power consumption will allow you to save up to 185 euro* per year. And you aren’t just saving money; you’re also investing in environmental responsibility. The table on page 3 shows how much electricity and money you can save each year thanks to the new Maxiglass Noverta bottle cooler.

Fitted with 2 glass sliding doors with an anthracite door frame and exterior made of anthracite steel panels

Fitted with a hinged glass door with an anthracite door frame (anticlockwise) and exterior made of anthracite steel panels

840/850mm

MG1/140RG

Fitted with a hinged glass door with an anthracite door frame (clockwise) and exterior made of anthracite steel panels

840/850mm

MG1/140LG

MG1/150SD

MG1/150RDDCS

Fitted with a hinged solid stainless steel door (clockwise) and kick plate. Exterior made of anthracite steel panels MG1/150LDDCS

Fitted with a hinged solid stainless steel door (anticlockwise) and kick plate. Exterior made of anthracite steel panels

MG1/150RDD

Fitted with a hinged solid anthracite door (clockwise) and exterior made of anthracite steel panels MG1/150LDD

Fitted with an energy-efficient LED light

Fitted with a hinged solid anthracite door (anticlockwise) and exterior made of anthracite steel panels

with even, clear light distribution in order to display the contents of the cooler as effectively as possible. Thanks to a separate switch, it is possible to turn off the light without affecting the main function of the cooler. You can save even more energy by turning the light off at closing time.

Annual savings with the Maxiglass Noverta* Type

Savings in KWh

MG1/140 series MG1/150 series MG1/250 series MG1/275 series MG1/315 series

Savings in %

500 500 800 950 850

Savings in euro

Savings after 10 years in euro

32 100 32 100 36 160 38 190 30 170

1.000 1.000 1.600 1.900 1.700

Energy Technology List Maxiglass Noverta models are currently being approved for the Energy Technology List (ETL) in the United Kingdom. Models that are already on the list are the MG1/150, 250, 275, 315G, MG1/150, 250, 275 and 315GCS.

General characteristics

Maxiglass Noverta (under counter models) (specific characteristics in the table on page 7)

MG1/150RG

Fitted with a hinged glass door with an anthracite door frame (clockwise) and exterior made of anthracite steel panels MG1/150LG

Fitted with a hinged glass door with an anthracite door frame (anticlockwise) and exterior made of anthracite steel panels

Plug ready (no separate condenser required) Energy-efficient Environmentally friendly New design Maximum presentation Manufacturer’s warranty, 12 months on parts Electronic thermostat External temperature display and control Fitted with door locks as standard Adjustable wire mesh shelves LED lighting Automatic defrost Replaceable door seals Interior: silver-grey coated steel panels Temperature range: +2° C / +18° C 3

Green The new green Maxiglass Noverta is energy-efficient. You will save money and contribute to saving the environment

MG1/315G

thanks to its lower energy costs. The new

Fitted with 3 hinged glass doors with an anthracite door frame and exterior made of anthracite steel panels

design makes the Maxiglass the leading choice for presenting beverages in bottles and cans.

MG1/250G

Fitted with 2 hinged glass doors with an anthracite door frame and exterior made of anthracite steel panels MG1/275G

Fitted with 2 hinged glass doors with an anthracite door frame and exterior made of anthracite steel panels

Shelves Provided with wire mesh shelves as standard. Shelves can be changed (at an additional cost) with new, flat surface shelves. Bottles and cans are even more stable.

Display Variable temperature calibration visible on display. Adjust the temperature to your requirements. Save even more energy by slightly increasing the temperature at closing time.

MG1/275GCS

Fitted with 2 hinged glass doors with a stainless steel door frame and kick plate. Exterior made of anthracite steel panels

MG1/250GCS

Fitted with 2 hinged glass doors with a stainless steel door frame and kick plate. Exterior made of anthracite steel panels

MG1/315GCS

Fitted with 3 hinged glass doors with a stainless steel door frame and kick plate. Exterior made of anthracite steel panels

MG1/250DD

Fitted with 2 hinged solid anthracite doors and exterior made of anthracite steel panels

MG1/250DDCS

Fitted with 2 hinged solid stainless steel doors and kick plate. Exterior made of anthracite steel panels

MG1/275SD MG1/250SD

Fitted with 2 glass sliding doors with an anthracite door frame and exterior made of anthracite steel panels

MG1/315SD

Fitted with 3 glass sliding doors with an anthracite door frame and exterior made of anthracite steel panels

Handles The anthracite-coloured models with a hinged door are fitted with a stylish and robust integral handle which is installed across the entire length of the cooler (from top to bottom). Therefore, even if the Maxiglass cooler is not located on the floor, it is still easy to open.

Fans Efficient and energy saving fans to ensure that cold air is effectively and quickly distributed throughout the cooler. 5

General characteristics

Maxiglass (tall upright models) (specific characteristics in the table)

MG/300RG

Plug ready (no separate condenser required) Maximum presentation Manufacturer’s warranty, 12 months on parts Electronic thermostat External temperature display and control Fitted with door locks as standard Fitted with 5 wire mesh shelves Fluorescent lighting Automatic defrost Exchangeable door seals Interior: silver-grey coated steel panels Temperature range: +2° C / +18° C

MG/300LG

Fitted with a hinged glass door with an anthracite door frame (clockwise) and exterior made of anthracite steel panels

MG/300RGCS

Fitted with a hinged glass door with a stainless steel door frame (clockwise) and kick plate. Exterior made of anthracite steel panels

Fitted with a hinged glass door with an anthracite door frame (anticlockwise) and exterior made of anthracite steel panels

MG/300LGCS

Fitted with a hinged glass door with a stainless steel door frame (anticlockwise) and kick plate. Exterior made of anthracite steel panels

MG/500G

Fitted with 2 hinged glass doors with an anthracite door frame and exterior made of anthracite steel panels

MG/500GCS

Fitted with 2 hinged glass doors with a stainless steel door frame and kick plate. Exterior made of anthracite steel panels

Accessories

Accessories for Maxiglass (Noverta)

Extra wire mesh shelves, special wine shelves or new flat shelf surfaces can be ordered separately. Additional shelf clips also need to be ordered separately.

MG/500SD

Fitted with 2 glass sliding doors with an anthracite door frame and exterior made of anthracite steel panels

Item Number

Wine shelf for MG1/140 and MG1/150 (max. 4) 004010370 Wine shelf for MG1/250 (max. 4) 004010389 Wine shelf for MG1/275 (max. 4) 004010407 Wine shelf for MG1/315 (max. 4) 004010339 Wine shelf for MG/300 (max. 8) 004010370 Wine shelf for MG/500 (max. 8) 004010391 Wire mesh shelf for MG1/140 and MG1/150 004010368 Wire mesh shelf for MG1/250 004010413 Wire mesh shelf for MG1/275 004010157 Wire mesh shelf for MG1/315 004010338 Wire mesh shelf for MG/300 004010368 Wire mesh shelf for MG/500 004010366 Flat shelf shelf surface for MG1/140 and MG1/150 000050855 Flat shelf shelf surface for MG1/250 000050856 Flat shelf shelf surface for MG1/275 000050857 Flat shelf shelf surface for MG1/315 000050858 Mesh shelf brackets (4-7 items per shelf necessary) 013010001

Specific characteristics Maxiglass (Noverta)

MODEL

# DOORS

DOOR COLOUR INTERNAL VOLUME STORAGE CAPACITY

MG1/140RG

1x clockwise

anthracite

140 litre 135 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 840/850mm 2x single

MG1/140LG

1x anticlockwise anthracite

140 litre 135 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 840/850mm 2x single

MG1/140RGCS

1x clockwise

stainless steel

140 litre 135 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 840/850mm 2x single

MG1/140LGCS

1x anticlockwise stainless steel

140 litre 135 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 840/850mm 2x single

MG1/150RG

1x clockwise

anthracite

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150LG

1x anticlockwise anthracite

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150RGCS

1x clockwise

stainless steel

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150LGCS

1x anticlockwise stainless steel

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150SD

2x sliding door

anthracite

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 526 x 900/910mm 2x single

MG1/150RDD

1x clockwise

anthracite

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150LDD

1x anticlockwise anthracite

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150RDDCS

1x clockwise

stainless steel

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/150LDDCS

1x anticlockwise stainless steel

150 litre 144 x 33 cl (ø60mm)

240W

173W 1 +2˚ C / +18˚ C 602 x 506 x 900/910mm 2x single

MG1/250DD

2x hinged

anthracite

250 litre 215 x 33 cl (ø60mm)

240W

181W 1 +2˚ C / +18˚ C 900 x 506 x 900/910mm 2x double

MG1/250DDCS

2x hinged

stainless steel

250 litre 215 x 33 cl (ø60mm)

240W

181W 1 +2˚ C / +18˚ C 900 x 506 x 900/910mm 2x double

MG1/250G

2x hinged

anthracite

250 litre 215 x 33 cl (ø60mm)

240W

181W 1 +2˚ C / +18˚ C 900 x 506 x 900/910mm 2x double

MG1/250GCS

2x hinged

stainless steel

250 litre 215 x 33 cl (ø60mm)

240W

181W 1 +2˚ C / +18˚ C 900 x 506 x 900/910mm 2x double

MG1/250SD

2x sliding door

anthracite

250 litre 215 x 33 cl (ø60mm)

240W

181W 1 +2˚ C / +18˚ C 900 x 526 x 900/910mm 2x double

MG1/275G

2x hinged

anthracite

275 litre 295 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1200 x 506 x 900/910mm 2x double

MG1/275GCS

2x hinged

stainless steel

275 litre 295 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1200 x 506 x 900/910mm 2x double

MG1/275SD

2x sliding door

anthracite

275 litre 295 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1200 x 526 x 900/910mm 2x double

MG1/315G

3x hinged

anthracite

315 litre 333 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1350 x 506 x 900/910mm 6x single

MG1/315GCS

3x hinged

stainless steel

315 litre 333 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1350 x 506 x 900/910mm 6x single

MG1/315SD

3x sliding door

anthracite

315 litre 333 x 33 cl (ø60mm)

488W

316W 1 +2˚ C / +18˚ C 1350 x 526 x 900/910mm 6x single

MG/300RG

1x clockwise

anthracite

300 litre 310 x 33 cl (ø60mm)

463W

365W 1 +2˚ C / +18˚ C 602 x 540 x 1800mm

MG/300LG MG/300RGCS

1x anticlockwise anthracite 1x clockwise

stainless steel

300 litre 310 x 33 cl (ø60mm) 300 litre 310 x 33 cl (ø60mm)

COOLING CAPACITY POWER CONSUMPTION TEMP. RANGE

463W 463W

DIMENSIONS W x D x H *

#MESHES GREEN

5x single

365W +2˚ C / +18˚ C 602 x 540 x 1800mm 365W +2˚ C / +18˚ C 602 x 540 x 1800mm

MG/300LGCS

1x anticlockwise stainless steel

300 litre 310 x 33 cl (ø60mm)

463W

365W +2˚ C / +18˚ C 602 x 540 x 1800mm

5x single

MG/500G

2x hinged

500 litre 490 x 33 cl (ø60mm)

463W

400W 1 +2˚ C / +18˚ C 920 x 540 x 1800mm

5x double

MG/500GCS MG/500SD

2x hinged 2x sliding door

anthracite stainless steel anthracite

500 litre 490 x 33 cl (ø60mm) 500 litre 490 x 33 cl (ø60mm)

463W 463W

5x double

400W +2˚ C / +18˚ C 920 x 540 x 1800mm 400W +2˚ C / +18˚ C 920 x 567 x 1800mm

Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C

* During installation: add 40mm to the overall depth (in conjunction with the appliance’s plug) and add 10 mm to the total width.

Gamko manufactures and supplies (see also www.gamko.com)

Professional refrigeration for hospitality trade

GAMKO B.V. ETTEN-LEUR

Gamko BV P.O. Box 274 4870 AG Etten-Leur

T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl

Mon Plaisir 75 4879 AL Etten-Leur The Netherlands

www.gamko.nl

GM-V1-01/12

No rights can be derived from the information as shown in this brochure. Changes in content, technology and prices reserved. 06/2012