Freezers for bottles and glasses
Efficient and powerful cooling system Frozen glasses within a few minutes For ice-cold bottles of liqueur and spirits Outstanding taste experience With heated glass door to prevent condensation Professional display
Gamko glass frosters for bottles and glasses
Gamko manufactures and supplies freezers for inset or fitting on the back bar counter top. These plug ready freezers have been specially developed for rapid freezing of drinks glasses and for giving out ice-cold bottles of liqueur and spirits such as vodka or gin. Thanks to the ultra-efficient cooling system and fan (MF models), within a few minutes you will have access to frozen glasses. By selecting the (heated) glass door, you can also provide an attractive display of bottles of spirits and liqueur. Combined with the correct bottles and/or glasses, you will provide the bar with a professional image. Gamko supplies three variants of freezers for glasses and bottles. Two professional freezers with a capacity of 110 litres, in which the one is fitted with a heated glass door and the other one with a solid, rigid chromium steel door. The third variant is a mini-freezer manufactured out of silver-coloured plastic complete with a special rack for hanging glasses by their base.
Professional refrigeration for hospitality trade
General characteristics
MF/110RCS
glass frosters for bottles and glasses
Exterior made of chromium steel and fitted with solid door, right-hinged
MF/110LCS
Exterior made of chromium steel and fitted with solid door, left-hinged
MF/110RGCS
Exterior made of chromium steel and fitted with heated glass door, right-hinged
Plug ready (no separate condensing unit required) Efficient cooling system Electronic thermostat with digital display Automatic defrost Fitted with 1 door, right-hinged or left-hinged For the model with a glass door: heated glass to prevent the build-up of condensation For the model with a glass door: internal lighting 2 adjustable feet on the front Exchangeable door seals For inset or surface-mounting Thermostat -10° C / -21° C
MF/110LGCS
Exterior made of chromium steel and fitted with heated glass door, left-hinged
Helsinki-S
Exterior made of silver-coloured plastic and fitted with solid door, right-hinged (interchangeable)
Accessories for MF/110CS and MF/110GCS
Item number 004010393 013010001
Extra wire mesh shelf (330 x 486mm) Shelf support clip (4 no. per shelf required)
MODEL DOOR TYPE
INTERNAL VOLUME
STORAGE CAPACITY
MF/110RCS MF/110LCS MF/110RGCS MF/110LGCS HELSINKI-S
80 glasses (ф 6cm) 235W 1 420W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 235W 420W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 350W 650W 1 -10˚C / -21˚C 1 80 glasses (ф 6cm) 350W 650W 1 -10˚C / -21˚C 10 bottles and 86W 100W -6˚C / -20˚C 40 shot glasses on their base
1 x solid, chromium steel, right-hinged 110 litres 1 x solid, chromium steel left-hinged 110 litres 1 x glass & chromium steel, right-hinged 110 litres 1 x glass & chromium steel, left-hinged 110 litres 1 x solid plastic, right-hinged. 2 80 litres
1
COOLING POWER THERMOSTAT EXTERIOR INTERIOR CAPACITY CONSUMPTION
chromium steel chromium steel chromium steel chromium steel silver-coloured plastic
DIMENSIONS WxDxH*
silver-grey-coated steel panels silver-grey-coated steel panels silver-grey-coated steel panels silver-grey-coated steel panels white plastic
602 x 514 x 905mm 602 x 514 x 905mm 602 x 514 x 905mm 602 x 514 x 905mm 553 x 611 x 631mm
2 Door supplied as standard right-hinged but is interchangeable (left-hinged)
Conditions: Te = - 25˚C | Tc = + 45˚C | ambient temperature = + 25˚C
* When flush-mounted: add a minimum of 40mm to the depth and 10mm to the overall width.
Professional refrigeration for hospitality trade
GAMKO B.V. ETTEN-LEUR
Gamko BV P.O. Box 274 4870 AG Etten-Leur
T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl
Mon Plaisir 75 4879 AL Etten-Leur The Netherlands
www.gamko.com
GV-V1-01/13
No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013
Flexbar Flexible and multi-purpose modular bar system Configure your ideal bar
With an extensive number of possibilities Create an unique atmosphere with coloured EQUAL-LED lighting Without any obligation and free of charge a custom made project drawing Easy installation
Gamko FLEXBAR modular bar system
Professional refrigeration for hospitality trade
Gamko: the inventors of the modular bar system Back in 1979 Gamko introduced an
With more than 50 years of refrigeration
innovative approach to bar construction:
expertise, right up until now Gamko has
the modular bar installation. For the first
and continues to make reliable and high-
time it was possible to create the most
quality, premium, professional coolers
flexible possible bar using detachable
for the catering industry. And of course
sections, fronts and accessories whilst
the same also applies in respect of our
retaining all the cooling technology
modular bar system. Solid, high-grade,
features. Since this time, Gamko has
thoroughly tested, flexible, ergonomic
continued to develop this unique
and especially attractive in terms of
variant into what it is today: The Gamko
appearance. Find out about Gamko's
FLEXBAR with its unrivalled features.
FLEXBAR.
Because as the name suggests: flexibility is what counts!
General characteristics FLEXBAR configuration
Specify your desired refrigerated and unrefrigerated storage. Create a plug ready modular bar configuration or make it suitable for a split design with an evaporator. Continue to expand with sections in two width measurements: 41 cm and 54 cm. Available in 3 designs: with fronts in anthracite, in stainless steel (AISI 304) and in glass with white LED lighting with even light distribution (patented EQUAL LED). All FLEXBAR fronts have a patented organic external design, are seamless and can easily be cleaned, are robust, solid, sustainable and fit into any interior. Create for instance, a right-angled bar, a curved bar, a bar with doors on both sides or a cocktail bar with professional stainless steel accessories or a combination of these. Make it stand out with coloured LED lighting combined with glass storage segments (patented EQUAL LED). Prevent theft with the Central Electronic Locking System (patented CELS). Create variety with handy extras such as drawers, bottle racks, bottle coolers in the front of the counter top, unrefrigerated sections with rinsing racks and waste bins, coffee-waste drawers and stainless steel (cocktail) accessories. Quick to assemble on site thanks to the Cam Lock system and, where necessary, complete with specific installation instructions. Standard factory warranty with a renewal option including a maintenance agreement for years of worry-free refrigeration. Arrange for your idea, wish list or rough sektch to be professionally drawn up by our project team without obligation and free of charge.
2
Safety FLEXBAR complies with the most stringent safety requirements All electrical components in the refrigerated sections work at low voltage (24 Volts). In addition, all glazed fronts are fitted with safety glass.
Easy installation The FLEXBAR is fitted as standard with heigh-adjustable feet, which can also be adjusted from the outside. With the Cam Lock system, the detachable sections can be interconnected in situ in no time at all. FLEXBAR installations have been assembled by local fitters right throughout the world.
Ergonomic handle The sturdy, metal handle consists of two components. The aluminium exterior is responsible for the solid build, while the soft touch rubber interior is responsible for excellent grip, even with wet hands.
White and coloured lighting (EQUAL-LED) As standard all glass sections are supplied with white EQUAL-LED lighting. The FLEXBAR can also be supplied with coloured EQUAL-LED lighting. This patented lighting provides an even distribution of light. Using the supplied remote control, you can set the entire bar layout to one colour, allow the colour to automatically follow a routine, dim the light intensity and allow the colour to change. You can get your FLEXBAR lighting to fit in with the lighting plan of the overall room. Lighting is easy to adapt based on the plug & play principle.
Central Electronic Locking System The FLEXBAR can be supplied with a patented and fully integrated with Central Electronic Locking System (CELS). Using the machine unit or evaporator fitted with a lock control, the bar can be fully locked down with one simple action. Straightforward, fast, safe and no section can be overlooked. In addition to the required control on the machine unit or evaporator, each section can be upgraded with its own lock. Locks are easy to adapt based on the plug & play principle.
Handy, robust drawers The solid FLEXBAR drawers are fitted with telescopic steel guides, which ensure that the drawer closes the last few centimetres by itself. Two drawer dividers prevent bottles from falling over when closing or opening. The maximum weight-bearing capacity per drawer is 75 kg. With glass drawers including LED lighting in each drawer front, you can provide a very attractive display for bottled drinks. By leaving the first row of bottles in place when serving, the display always remains beautiful and perfectly intact.
Removable and flexible bottle rack For the refrigerated sections, the bottle rack is included inside a drawer. This makes it easy to clean and can also be interchanged with a normal drawer after being installed. In this way, the depth can be adjusted depending on the bottle size.
3
A Gamko FLEXBAR in 4 steps Putting together the ideal FLEXBAR may, perhaps, appear to be somewhat complex. Using the 4-step plan below, we will lead you through the many options. Specify your preferences and requirements and Gamko will then help you in devising your plans. We can imagine that you may first have some questions. We will be pleased to answer any questions! You can find our telephone number on the back of this brochure. Don't hesitate in asking for the FLEXBAR check list. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.
A Gamko FLEXBAR in 4 steps Select a machine unit or evaporator unit with the correct control system: • you can build a plug ready configuration with a condensing unit (page 5); • you can build a split design with an evaporator unit (page 5); • make sure you have the correct control system if you are choosing lighting, locks or a combination of the two.
4 3 2 1 STAP
STAP
STAP
STAP
Connect refrigerated sections to the machine unit or to the evaporator unit and finish it with a set of end panels: • specify your desired refrigerated and unrefrigerated storage capacity • refrigerated sections with door and drawer fronts, - made of anthracite steel panels (page 6) - made of glass with white or coloured EQUAL-LED lighting (page 7) - made of stainless steel (page 8);
• refrigerated sections fitted with bottle rack, bottle bin and Central Electronic Locking
STAP
STAP
STAP
STAP
4 3 2 1
System (CELS);
• refrigerated pass-through sections (page 9); • end panels and in between panels (page 10).
Remember that: • wherever possible, the machine unit or the evaporator unit is installed centrally between the chilled sections; • We recommended a maximum of four refrigerated segments measuring 54cm wide and a maximum of five measuring 41cm per machine unit or evaporator unit; • an evaporator unit can never be left in a right outside position for maintenance reasons; • if you prefer a FLEXBAR with white or coloured EQUAL-LED Lighting LED lighting, then choose segments with a glass front.
Make the FLEXBAR even more complete and attractive with: • separate stand alone cooler and freezer for creating a separate temperature zone (page 11); extra standard accessories (page 11); corner pieces for a curved bar configuration (page 10); unrefrigerated sections with or without a front (page 12); unrefrigerated drawer sections for rinse racks, coffee or waste bin(s); accessories for a cocktail bar (page 13); stainless steel counter tops (page 14).
STAP
STAP
STAP
4 3 2 1
STAP
• • • • • •
Send your sketch and/or wish list to Gamko:
4
Based on this, Gamko will draw up a project drawing to provide you with a realistic impression. At the same time, Gamko will provide an appropriate and non-binding quotation. We can imagine that you may have some questions. You can find our telephone number on the back of this brochure. Don't hesitate to ask for the special FLEXBAR form. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.
FLEXBAR machine units X/MU or X/PTMU
Machine units and evaporator units
4 3 2 1
Machine units and evaporator units are the heart of a FLEXBAR installation. The refrigerated sections are connected to this. To be able to ensure that lighting and/or locks operate centrally, you select a type of machine unit or evaporator unit with the Central Electronic Locking System needed for this. Pass-through sections (see also: page 9) work with a special machine unit or evaporator unit fitted with a FLEXBAR front to the front and the rear.
STAP
STAP
STAP
MACHINE unit (& electr. connection)
STAP
where applicable with Central Electronic Locking System.
Anthracite front(s). Dimensions (W x D x H): 410 x 560 x 860/880mm* or 410 x 600 x 860/880mm* for pass-through sections.
standard machine unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light
ITEM NO.
ITEM NO. IF PASS-THROUGH SEGMENTS
X/MU X/PTMU X/MU-G X/PTMU-G X/MU-GC X/PTMU-G X/MU-K X/PTMU-K X/MU-G-K X/PTMU-G-K X/MU-GC-K X/PTMU-G-K
X/MUS
Front made of stainless steel Dimensions (W x D x H): 410 x 560 x 860/880mm*
MACHINE UNIT (& electr. connection)
ITEM NO.
standard machine unit + lock system
X/MUS X/MUS-K
X/1M
Machine unit fitted with coffee fold out drawer. Anthracite front. Dimensions (W x D x H): 540 x 560 x 860/880mm*
machine unit (& electr. connection)
ITEM NO.
X/1M X/1M-G X/1M-GC X/1M-K X/1M-G-K X/1M-GC-K
standard machine unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light
General characteristics FLEXBAR machine unit & evaporator units
Electronic thermostat with display (+2ËšC / +18ËšC) Machine unit cooling capacity 656W (optimal) Machine unit power consumption max. 500W / evaporator units max. 80W Machine unit with automatic defrost / evaporation of leak water Also available with a handy bottle rack (anthracite) Manufacturer's warranty Easy to maintain (service-friendly) Example on python tubing Height-adjustable legs Option: drive system for locks and/or lighting Option: fronts to front and rear (for pass-through sections)
FLEXBAR evaporator units (split design) X/VS20 or X/PTVS20
Anthracite front(s). Dimensions (W x D x H): 200 x 560 x 860/880mm* or 200 x 600 x 860/880mm* for pass-through sections. EVAPORATOR UNIT (& electr. connection)
ITEM NO.
X/VS20 X/PTVS20 X/VS20-G X/PTVS20-G X/VS20-GC X/PTVS20-GC X/VS20-K X/PTVS20-K X/VS20-G-K X/PTVS20-G-K X/VS20-GC-KX/PTVS20-GC-K
standard evaporator unit + white light + coloured light + lock system + lock system & white light + lock system & coloured light
ITEM NO. IF PASS-THROUGH SECTIONS
X/VSS20
Front made of stainless steel Dimensions: (W x D x H): 200 x 560 x 860/880mm* EVAPORATOR UNIT (& electr. connection) ITEM NO.
standard evaporator unit + lock system
X/VSS20 X/VSS20-K
* Each bar configuration: add 40mm to the depth and 10mm to the overall width.
5
General characteristics Refrigerated segments with anthracite front
Refrigerates in combination with machine unit / evaporator unit (page 5) Available with door, drawers and bottle rack with drawer As standard two adjustable shelves with segments supplied with door Height-adjustable feet from inside Available in width dimensions: 41cm and 54cm Depth and height standard for each section: 560 x 860/880mm** Option: Central Electronic Locking System
STAP
STAP
STAP
STAP
4 3 2 1
Refrigerated segments with an anthracite front are available in the variants set out below and in two width dimensions: 41 cm and 54 cm wide.
Illustrated segments 54cm wide. Also available in 41 cm wide.
X/2LA X/3DA X/3DH X/5DA X/6DA X/ 6DHA X/7DA
Item numbers and specific features of refrigerated segments with anthracite front LAYOUT SEGMENTS
WIDTH
ITEM NO.
54cm
X/2LA54 X/2LA54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
door left-hinged
KEG STORAGE CAPACITY
door left-hinged
41cm
X/2LA41 X/2LA41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
door right-hinged
54cm
X/2RA54 X/2RA54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
door right-hinged
41cm
X/2RA41 X/2RA41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
2 x ½ drawers
54cm
X/3DA54 X/3DA54K
98 x 33cl / 40 x 1-1.5 L *
-
2 x ½ drawers
41cm
X/3DA41 X/3DA41K
68 x 33cl / 30 x 1-1.5 L*
-
bottle rack & ½ drawer
54cm
X/3DHBA54 X/3DHBA54K
49 x 33cl & 8 x 1-1.5 L* / 28 x 1-1,5 L*
-
bottle rack & ½ drawer
41cm
X/3DHBA41 X/3DHBA41K
34 x 33cl & 6 x 1-1.5 L* / 21 x 1-1.5 L*
-
5/12 drawer & 7/12 drawer
54cm
X/5DA54 X/5DA54K
98 x 33cl / 40 x 1-1.5 L*
-
5/12 drawer & 7/12 drawer
41cm
X/5DA41 X/5DA41K
68 x 33cl / 30 x 1-1.5 L*
-
3 x 1/3 drawer
54cm
X/6DA54 X/6DA54K
147 x 33cl*
-
3 x 1/3 drawer
41cm
X/6DA41 X/6DA41K
102 x 33cl*
-
bottle rack & 2 x 1/3 drawer
54cm
X/6DHBA54 X/6DHBA54K
98 x 33cl & 4 x 1-1.5 L*
-
bottle rack & 2 x 1/3 drawer
41cm
X/6DHBA41 X/6DHBA41K
68 x 33cl & 3 x 1-1.5 L*
-
1/3 drawer & 2/3 drawer
54cm
X/7DA54 X/7DA54K
98 x 33cl / 49 x 33cl & 20 x 1-1.5 L*
1 x 30 L
1/3 drawer & 2/3 drawer
41cm
X/7DA41 X/7DA41K
68 x 33cl / 34 x 33cl & 15 x 1-1.5 L*
-
* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.
6
ITEM NO. WITH LOCK BOTTLE STORAGE CAPACITY
** Each bar configuration: add 40mm to the depth and 10mm to the overall width.
General characteristics Refrigerates in combination with machine unit / evaporator unit (page 5) As standard designed with energy-saving, white EQUAL-LED lighting: 1 for each drawer and 2 per door (excludes control system) Anthracite-coloured bezel around fronts Safety glass Available with door and with drawers As standard two adjustable shelves with section supplied with door Height-adjustable feet from inside Available in width dimensions: 41cm and 54cm Depth and height standard for each section: 560 x 860/880mm** Option: coloured EQUAL-LED lighting Option: Central Electronic Locking System
Refrigerated segments with glazed front
are available in the variants set out below and in two width dimensions: 41 cm and 54 cm wide.
STAP
STAP
STAP
STAP
4 3 2 1
Refrigerated segments with a glazed front
Illustrated segments 54cm wide. Also available in 41 cm wide.
X/2LG X/3DG X/5DG X/6DG X/7DG
Item numbers and specific features of refrigerated segments with glazed front LAYOUT SEGMENTS WIDTH ITEM NO. WHITE ITEM NO. COLOURED ITEM NO. WHITE ITEM NO. COLOURED LIGHTING LIGHTING LIGHTING & LOCK LIGHTING & LOCK
X/2LG54
door left-hinged
54cm
door left-hinged
41cm
door right-hinged
54 cm
door right-hinged
41cm
X/2RG41
2 x ½ drawers
54cm
X/3DG54
2 x ½ drawers
41cm
X/3DG41
5/12 drawer & 7/12 drawer 54cm
X/5DG54
5/12 drawer & 7/12 drawer 41cm
X/5DG41
3 x 1/3 drawer
54cm
X/6DG54
3 x 1/3 drawer
41cm
X/6DG41
1/3 drawer & 2/3 drawer
54cm
X/7DG54
1/3 drawer & 2/3 drawer
41cm
X/2LG41
X/2RG54
X/7DG41
X/2LGC54 X/2LGC41
X/2RGC54 X/2RGC41 X/3DGC54 X/3DGC41 X/5DGC54 X/5DGC41 X/6DGC54 X/6DGC41 X/7DGC54 X/7DGC41
* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.
STORAGE CAPACITY BOTTLES
STORAGE CAPACITY KEGS
X/2LGC54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
X/2LGC41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
X/2RGC54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
X/2RG41K
X/2RGC41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
X/3DG54K
X/3DGC54K
98 x 33cl / 40 x 1-1.5 L*
-
X/3DG41K
X/3DGC41K
68 x 33cl / 30 x 1-1.5 L*
-
X/5DG54K
X/2LG54K X/2LG41K
X/2RG54K
X/5DGC54K
98 x 33cl / 40 x 1-1.5 L*
-
X/5DG41K
X/5DGC41K
68 x 33cl / 30 x 1-1.5 L*
-
X/6DG54K
X/6DGC54K
147 x 33cl*
-
X/6DG41K
X/6DGC41K
102 x 33cl*
-
X/7DG54K
X/7DGC54K
98 x 33cl / 49 x 33cl & 20 x 1-1.5 L* 1 x 30 L
X/7DGC41K
68 x 33cl / 34 x 33cl & 15 x 1-1.5 L* -
X/7DG41K
** Each bar configuration: add 40mm to the depth and 10mm to the overall width.
7
General characteristics Refrigerated segments with stainless steel front
Refrigerates in combination with machine unit / evaporator unit (page 5) Available with door and with drawers Fronts made completely of stainless steel and without seams (hygiene) Available in width dimensions: 41cm and 54cm As standard two adjustable shelves supplied with door Height-adjustable feet from inside Depth and height standard for each section: 560 x 860/880mm** Option: Central Electronic Locking System
steel front are available in the variants set
STAP
STAP
STAP
STAP
4 3 2 1
Refrigerated segments with a stainless
out below and in two width dimensions: 41 cm and 54 cm wide.
Illustrated segments 54cm wide. Also available in 41 cm wide.
X/2RS X/3DS X/5DS X/6DS X/7DS
Item numbers and specific features of door and drawer sections with stainless steel front LAYOUT SEGMENTS
WIDTH
ITEM NO.
door left-hinged
54cm
door left-hinged
door right-hinged
BOTTLE STORAGE CAPACITY
KEG STORAGE CAPACITY
X/2LS54 X/2LS54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
41cm
X/2LS41 X/2LS41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
54cm
X/2RS54 X/2RS54K
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
door right-hinged
41cm
X/2RS41 X/2RS41K
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
2 x ½ drawer
54cm
X/3DS54 X/3DS54K
98 x 33cl / 40 x 1-1.5 L *
-
2 x ½ drawer
41cm
X/3DS41 X/3DS41K
68 x 33cl / 30 x 1-1.5 L*
-
5/12 drawer & 7/12 drawer
54cm
X/5DS54 X/5DS54K
98 x 33cl / 40 x 1-1.5 L*
-
5/12 drawer & 7/12 drawer
41cm
X/5DS41 X/5DS41K
68 x 33cl / 30 x 1-1.5 L*
-
3 x 1/3 drawer
54cm
X/6DS54 X/6DS54K
147 x 33cl*
-
3 x 1/3 drawer
41cm
X/6DS41 X/6DS41K
102 x 33cl*
-
1/3 drawer & 2/3 drawer
54cm
X/7DS54 X/7DS54K
98 x 33cl / 49 x 33cl & 20 x 1-1.5 L*
1 x 30 L
1/3 drawer & 2/3 drawer
41cm
X/7DS41 X/7DS41K
68 x 33cl / 34 x 33cl & 15 x 1-1.5 L*
-
* 33cl bottle is Ø 60mm, 1-1.5 l bottle is Ø 88mm. Capacity also depends on the bottle height.
8
ITEM NO. WITH LOCK
** Each bar configuration: add 40mm to the depth and 10mm to the overall width.
General features of pass-through segments Refrigerated pass-through segments
Refrigerates in combination with machine unit / evaporator unit (page 5) Works combined with special machine unit / evaporator unit fitted with double front Glazed front designed as standard with white EQUAL-LED lighting (excl. control system) Available in width dimensions: 41cm and 54cm As standard two adjustable shelves supplied per segment Height-adjustable feet from inside Depth and height standard for each section: 600 x 860/880mm (deeper than standard sections)* Option: coloured EQUAL-LED lighting Option: Central Electronic Locking System
Refrigerated pass-through segments are
available in five door combinations and in
STAP
STAP
STAP
4 3 2 1
STAP
(door on both sides)
two width dimensions: 41 cm and 54 cm wide
The Gamko FLEXBAR can also be assembled using pass-through segments. There is a door on the refrigerated segments both at the front and at the rear. The associated machine unit / evaporator unit is also fitted with 2 fronts (see page 5). The advantage of pass-through segments is that the bar can be served from 2 sides. This means that the bar is used more creatively and functionally. Take for example: • an additional bar installation between the front bar and back bar. Products can be viewed and taken out from 2 sides; • a front bar, which displays drinks at the front that can easily be taken out by staff walking round serving customers. Drinks can be replenished from behind the bar based on the first in-first out principle; • a back bar, which can be opened at the back into an adjoining coldroom at the rear. Chilled drinks can be replenished directly via the coldroom; • a bar installation with glass doors to the front and solid doors to the rear.
Item numbers and specific features of refrigerated pass-through segments
FRONT WIDTH PASS- LED ITEM NO. PASS- COMBINATION THROUGH SECTION LIGHTING TROUGH SECTION **
ITEM NO. DOOR 1
ITEM NO. DOOR 2
anthracite-anthracite 54cm
-
X/PTS54S
X/FRONTRA54 X/FRONTLA54
anthracite-anthracite 41cm
-
X/PTS41S
X/FRONTRA41 X/FRONTLA41
54 cm
white
X/PTS54G
X/FRONTRA54 X/FRONTLG54
anthracite-glass
41cm
white X/PTS41G
X/FRONTRA41 X/FRONTLG41
anthracite-glass
54cm
coloured X/PTS54GC
X/FRONTRA54 X/FRONTLG54
anthracite-glass
41cm
coloured X/PTS41GC
X/FRONTRA41 X/FRONTLG41
glass-glass
54cm
white X/PTG54G
X/FRONTRG54 X/FRONTLG54
glass-glass
41cm
white X/PTG41G
X/FRONTRG41 X/FRONTLG41
glass-glass
54cm
coloured X/PTGC54GC
X/FRONTRG54 X/FRONTLG54
glass-glass
41cm
coloured X/PTGC41GC
X/FRONTRG41 X/FRONTLG41
anthracite-glass
** Option with Central Electronic Locking System on request. 9
End panels and in between panels STAP
STAP
STAP
STAP
4 3 2 1
End panels End panels are always needed for insulation and / or finish the total bar configuration. Using them, a refrigerated installation starts and ends as standard with a 4cm thick, insulated end panel. If there should be insufficient room, then exceptionally a 2cm thick, insulated end panel will also suffice. An non-refrigerated installation starts and ends with a non-insulated end panel. End panels can be supplied in 2 designs: anthracite and stainless steel.
In between panels In between panels are used between linked segments. An insulated in between panel is used to create separate temperature zones. A non-insulated panel is used to separate refrigerated zones from one another, for example: when using multiple machine units in one bar, for waste bins (to prevent odours).
Panel type
End panel refrigerated sections, 4cm thick insulation (2) End panel refrigerated sections, 4cm thick insulation (2) End panel refrigerated sections, 2cm thick insulation (2) End panel refrigerated sections, 2cm thick insulation (2) End panel for unrefrigerated sections (2) End panel for unrefrigerated sections (2) In between panel insulated In between panel non-insulated
Corner pieces for a curved bar
4 3 2 1 STAP
STAP
STAP
STAP
Gamko also manufactures and supplies special corner pieces used when building a round or curved FLEXBAR installation. These insulated corner pieces allow the cold air through and are precisely custom-made to the desired radius (item number: X/ CURVE). Given the accuracy required for such an installation, this is exclusively a custom application. Contact Gamko for their personal recommendation and quotation.
10
Colour
Item No.
anthracite stainless steel anthracite stainless steel anthracite stainless steel silver-grey stainless steel
X/EPA04 (set) X/EPC04 (set) X/EPA02 (set) X/EPC02 (set) X/EPA00 (set) X/EPC00 (set) X/TP02 X/TPC00
General characteristics Separate cooler and freezer (stand-alone) STAP
within the bar installation.
Plug ready (no separate condensing unit required) Chilling or freezing with left- or right-hinged door Available with glazed front and with anthracite front Supplied as standard with lock and white EQUAL-LED lighting Electronic thermostat with display 464W cooling capacity and power consumption of 425W Defrost / leak water: automatic / electric evaporation Volume 74 litres and storage capacity of 35 x 33cl or 20 x 1 litres or 1.,5 litres Option: coloured EQUAL-LED lighting (control system needed)
A FLEXBAR installation can be expanded with a separate cooler or freezer. These standalone sections have their own machine unit and are therefore plug ready. With this separate cooler or freezer you can easily create a separate temperature zone within the bar installation. The cooler and freezer can be supplied with glazed front fitted with an anthracite-coloured bezel and with a sealed anthracite front. DESIGN
ITEM NO. GLAZED FRONT
cooler door left-hinged
X/SCLG X/SCLGC
X/SCLA
cooler door right-hinged
X/SCRG X/SCRGC
X/SCRA
DESIGN
ITEM NO. GLAZED FRONT
ITEM NO. ANTHRACITE FRONT
freezer door left-hinged
X/SFLG X/SFLGC
X/SFLA
freezer door right-hinged
X/SFRG X/SFRGC
X/SFRA
ITEM NO. GLAZED FRONT & COLOURED LIGHTING
ITEM NO. GLAZED FRONT & COLOURED LIGHTING
ITEM NO. ANTHRACITE FRONT
Extra standard accessories
4 3 2 1 STAP
STAP
STAP
Door sections are fitted as standard with 2 shelves. Drawer sections are fitted as STAP
STAP
STAP
STAP
4 3 2 1
Easily create a separate temperature zone
standard with 2 drawer dividers per drawer and divide the drawer widthways. Additional shelves with or without upstand, drawer dividers, wire wine racks, wire meshes and a reinforced floor for if you are loading kegs, can all be ordered separately.
Accessories
Item No.
X/ACSH54 X/ACSH41 X/ACCK54 X/ACCK41 004010405 X/ACWCK54 X/ACWCK41 013010001 X/ACSB X/ACDD54 X/ACDD41 X/ACKR54 X/ACKR41
Shelf 54-section Shelf 41-section Wire mesh shelf 54-section Wire mesh shelf 41-section Extra mesh separate cooler/freezer Wire wine rack 54-section Wire wine rack 41-section Shelf brackets/mesh brackets (4 No. per shelf/wire mesh needed) Shelf upstand (at sides) Drawer divider 54-section (divide the drawer widthways) Drawer divider 41-section (divide the drawer widthways) Reinforced keg floor 54-section Reinforced keg floor 41-section
11
General characteristics Non-refrigerated segments STAP
STAP
STAP
STAP
4 3 2 1
Make the FLEXBAR complete with
Segments for non-refrigerated storage Can be supplied with rinser racks, waste bins, speed rails and other cocktail accessories Can be supplied with and without front and with drawers In two designs: anthracite or stainless steel Available in width dimensions: 41cm and 54cm (depending on the design) Height-adjustable feet from inside Depth and height standard for each section: 560 x 860/880mm**
non-refrigerated segments. Ideal for
storing waste bins and rinser racks, for instance, out of view.
X/OS
X/OSD
X/2DA
X/2DS
X/6DMA
X/7DMS
Item numbers and specific features of unrefrigerated sections LAYOUT SECGMENTS WIDTH COLOUR ITEM NO.
STORAGE CAPACITY BOTTLE
STORAGE CAPACITY KEG
ITEM NO. FOR SEGMENTS WITH DOOR / ITEM NO. WASTE BINS
A
open front with 2 shelves
54cm
anthracite
X/OS54
189 x 33cl / 58 x 1-1.5 L*
3 x 20 L / 1x 30-50 L
door anthracite: X/PLS54 door stainless steel: X/PLS54S
open front with 2 shelves
41cm
anthracite
X/OS41
147 x 33cl / 40 x 1-1.5 L*
2 x 20 L
door anthracite: X/PLS41 door stainless steel: X/PLS41S
B
open front with 3 drawers for rinser racks 500 x 500mm
54cm
anthracite
X/ODISH50 -
-
-
C
1/1 drawer
54cm
anthracite
X/2DA54 -
-
Waste bin: X/ACWB54M or X/ACWB54L or X/ACWB54XL
1/1 drawer
41cm
anthracite
X/2DA41 -
-
Waste bin: X/ACWB41M or X/ACWB41L or X/ACWB41XL
C
1/1 drawer
54cm
stainless steel X/2DS54 -
-
-
1/1 drawer
41cm
stainless steel X/2DS41 -
-
-
3 x 1/3 drawer
41cm
anthracite
X/6DMA
68 x 33cl
-
-
3 x 1/3 drawer
41cm
stainless steel X/6DMS
68 x 33cl
-
-
1 x 1/3 drawer and 1 x 2/3drawer
41cm
anthracite
X/7DMA
68 x 33cl or 15 x 100cl
-
Waste bin: X/ACWB41M
1 x 1/3 drawer and 1 x 2/3drawer
41cm
stainless steel X/7DMS
68 x 33cl or 15 x 100cl
-
Waste bin: X/ACWB41M
* Add bar configuration: add 40mm to the depth and 10mm to the overall width.
12
I D
Accessories for a cocktail bar STAP
STAP
STAP
STAP
4 3 2 1
In addition to the refrigerated segments
F
C
H
G
B E
and non-refrigerated segments , Gamko also supplies a range of professional
A
stainless steel accessories to make a bar a professional cocktail bar.
Accessories for a cocktail bar COCKTAIL ACCESSORIES ITEM NO.
DIMENSIONS EXTERNAL W x D X H
DIMENSIONS INTERNAL W x D x H
DIMENSIONS FLUSH-MOUNTED W X D
D
insulated stainless steel bin, flush-mounted with drain, 54 section
X/ACIICE54
434 x 434 x 296mm
344 x 344 x 244mm
415 x 415mm
insulated stainless steel bin, flush-mounted with drain, 41 section
X/ACIICE41
304 x 434 x 296mm
214 x 344 x 244mm
285 x 415mm
E
speed rail single 54 section
X/ACSP54
540 x 134 x 250/90mm
speed rail single 41-section
X/ACSP41
410 x 134 x 250/90mm
speed rail double 54-section
X/ACSP108
1080 x 134 x 250/90mm
speed rail double 41-section
X/ACSP82
820 x 134 x 250/90mm
F
XL speed rail 54-section
X/ACSPXL54
540 x 253 x 250/25mm
XL speed rail 41-section
X/ACSPXL41
410 x 253 x 250/25mm
G
bin divider
X/ACBD
sliding cover for bin 54-section
X/ACST54
sliding cover for bin 41-section
X/ACST41
H
bottle rack 54-section
X/ACBB54
bottle rack 41-section
X/ACBB41
I
rack for gastro 1/6 bins
X/ACTRAY
bottle opener
000030121
storage bin for caps
264610A31
stainless steel waste bins for non-refrigerated segments 1 bin measuring 400 x 410 x420mm/69 litres 1 bin measuring 400 x 410 x690mm/113 litres 1 bin measuring 270 x 410 x 420mm/46 litres 1 bin measuring 270 x 410 x 690mm/76 litres
STAP
STAP
STAP
STAP
4 3 2 1
WASTE BIN CONTAINER OPTIONS (W x D x H)
Item No. X/ACWB54M X/ACWB54XL X/ACWB41M X/ACWB41XL
13
Total Bar Solutions Each customer is unique and each bar is unique. Therefore Gamko is specialized at custom made Total Bar Solutions. Today Gamko helps you to impress your customer by making unique bar design proposals.
Stainless steel bar tops
By using tools like 3D impressions and an extended questionnaire, Gamko is trying to involve the end customer in the design process. In this way the customer can participate in the process to realize their wishes.
STAP
STAP
STAP
to suit the design of the bar.
STAP
4 3 2 1
Gamko supplies stainless steel bar tops The bar tops are made with stainless
steel (AISI 304). The stainless steel bar tops can be fitted with a drip tray and with upstand.
Back bar On many bar locations the customer has got a view of the back bar. By using the white and coloured EQUAL LEDlighting in combination with the glass storage segments you will create a prefect and special atmosphere.
General features Seamless Curves achieved for circular bars Bottom reinforced with wood
Project Badpaviljoen I Domburg
Front Bar The service side of the bar is ideal to equip with a professional cocktailstation which can be assembled with a large range of cocktail acessories to achieve a professional workplace for the employees. Project Teerkamer I Bergen op Zoom
When you contact us in the very initial phase of a project we are able to assist you in this process. Just follow our four steps... For more information you can check the website www.gamko.com or contact Gamko by email or phone.
Send your sketch and/or wish list to Gamko
STAP
STAP
STAP
STAP
4 3 2 1
Contact Gamko and arrange for your idea, wish list or rough sketch to be professionally drawn up by our project team without obligation and free of charge. In this you can be sure that you aren't forgetting anything and all of your ideas can be implemented down to the last detail. We can imagine that you may first have some questions. Call Gamko for help from one of our advisers. Don't hesitate to ask for the FLEXBAR check list. You can make a list of all your preferences and requirements yourself or do so in consultation with Gamko.
Gamko Export T +31 (0)76 - 508 7500 14
E sales@gamko.nl
Storage Capacity Flexbar
FLEXBAR 41-SECTIONS Drawer section - per drawer 45 x 20 cl.
(bottle Ø 50 mm)
36 x 25 cl.
(bottle Ø 58 mm)
40 x 20 cl.
24 x 33 cl.
(bottle Ø 53 mm)
(bottle Ø 66 mm)
34 x 33 cl.
(bottle Ø 60 mm)
23 x 50 cl.
15 x 100/150 cl.
30 x 50 cl.
20 x 100/150 cl.
(bottle Ø 70 mm)
(bottle Ø 88 mm)
11 x 200 cl.
(bottle Ø 105 mm)
Door section - per shelf 64 x 20 cl.
(bottle Ø 50 mm)
49 x 25 cl.
(bottle Ø 58 mm)
59 x 20 cl.
36 x 33 cl.
(bottle Ø 53 mm)
(bottle Ø 66 mm)
49 x 33 cl.
(bottle Ø 60 mm)
(bottle Ø 70 mm)
(bottle Ø 88 mm)
12 x 200 cl.
(bottle Ø 105 mm)
FLEXBAR 54-SECTIONS Drawer section - per drawer 72 x 20 cl.
(bottle Ø 50 mm)
49 x 25 cl. (bottle Ø 58 mm) or 49 x 33 cl. (bottle Ø 60 mm)
63 x 20 cl.
(bottle Ø 53 mm)
36 x 33 cl.
(bottle Ø 66 mm)
35 x 50 cl.
20 x 100/150 cl.
42 x 50 cl.
29 x 100/150 cl.
(bottle Ø 70 mm)
(bottle Ø 88 mm)
16 x 200 cl.
(bottle Ø 105 mm)
Drawer section - per shelf 80 x 20 cl.
(bottle Ø 50 mm)
63 x 25 cl. (bottle Ø 58 mm) or 63 x 33 cl. (bottle Ø 60 mm)
80 x 20 cl.
(bottle Ø 53 mm)
48 x 33 cl.
(bottle Ø 66 mm)
(bottle Ø 70 mm)
(bottle Ø 88 mm)
20 x 200 cl.
(bottle Ø 105 mm)
15
Gamko manufactures and supplies professional coolers for the bar and leisure industry Gamko is a leading manufacturer and supplier of professional coolers for the bar and leisure industry. Since its establishment in 1958, Gamko has grown into an international company, which focuses mainly on manufacturing, selling and maintaining a complete range of professional drinks coolers.
Quality from Europe With its own production and a research department in Etten-Leur, The Netherlands, Gamko develops, manufactures and supplies products that are tailored to the needs and quality requirements of today’s catering industry. Aspects such as design, functionality, customer satisfaction and the environment play a major role in this. Gamko is ISO9001- and ISO14001certified, guaranteeing the quality of our products and processes and ensuring continuous improvement. Modern production of equipment guarantees an excellent price-quality ratio and because production takes place in the Netherlands, Gamko also has highly flexible delivery times. If you choose Gamko, then you will be choosing quality, flexibility and sustainability.
Gamko: an international player with world-class products Gamko has its own export department with a worldwide network of agents and its own sales organisations in the Benelux, the United Kingdom and France. Our sales organisation delivers a complete range of cooling equipment, in particular for the bar and leisure industry right throughout the world. If after reading this brochure and/or documentation you would like more information about the products listed below, please feel free to contact Gamko.
Gamko manufactures and supplies (see also www.gamko.com)
FLEXBAR: modular (cocktail) bar system with unlimited options ECO-Line: bottle coolers with glass doors, solid doors and drawers Maxiglass: bottle coolers with glass and solid doors Coolers for kegs and /or crates of bottles Counter top coolers and freezers Bottles and/or glass freezers Stainless steel countertops Remote condensing units Refrigerated display cabinets Waste disposal coolers Slide top coolers
Professional refrigeration for hospitality trade
GAMKO B.V. ETTEN-LEUR
Gamko BV P.O. Box 274 4870 AG Etten-Leur
T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl
Mon Plaisir 75 4879 AL Etten-Leur The Netherlands
www.gamko.com
GX-V1-01/13
No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013
Waste disposal coolers Hygienic storage of waste Indispensable in warm ambient temperatures to prevent unwanted odours, contamination and vermin Also suitable for installation in smaller spaces
Gamko waste disposal coolers-KFK hygienic solution
Gamko produces and supplies professional coolers for the refrigerated storage of food waste. In view of the ever more stringent regulations governing food safety, this is an indispensable supplement in the kitchen. Refrigerated storage of waste is hygienic and prevents nasty unwanted odours, food contamination or vermin. Ideal and indispensable for restaurants and commercial kitchens, as well as shops, which prepare and/or sell perishable food items. The powerful condensing unit that goes with it ensures that the temperature in the container is guaranteed to constantly remain below 5 degrees Celsius. The sophisticated connection system facilitates quick and easy installation, even possible from the inside, ensuring that the waste cooler is also ideal for installation in smaller spaces. The hygienic stainless steel base is easy to keep clean and slopes slightly, making bins easy to move. Two versions of the Gamko waste coolers can be supplied: for chilling one or two bins made of hygienic stainless steel or practical anthracite-coloured sheet metal. The waste disposal coolers are supplied without bins.
Professional refrigeration for hospitality trade
General characteristics
KFK/1CS
Waste disposal coolers
Suitable for 1 bin with a capacity of 240 litres. Interior and exterior made of stainless steel. Exclusive machine unit KFK/MUCS.
Works in combination with a machine unit KFK/MUCS (must be ordered separately) Powerful and consistent chilling at a minimum of 5˚ C Easy installation, even externally Also suitable for small spaces Shut-off valve is kept open by pneumatic spring Robust closure including lock Sloping stainless steel base Energy-saving thanks to 40mm thick insulation Easy to keep clean Exclusive of bins Option: electronic evaporator tray Thermostat Cooling +2° C / +18° C
KFK/1
Suitable for 1 bin with a capacity of 240 litres. Exterior made of anthracite sheet steel and interior made of silver-grey coated sheet steel. Exclusive machine unit KFK/MUCS.
KFK/2CS
Suitable for 2 bins each with a capacity of 240 litres. Interior and exterior made of stainless steel. Exclusive machine unit KFK/MUCS.
KFK/MUCS
Machine unit with a cooling capacity of 608W* and power consumption of 450W*. Made of stainless steel KFK/2
Suitable for 2 bins each with a capacity of 240 litres. Exterior made of anthracite sheet steel and interior made of silver-grey coated sheet steel. Exclusive machine unit KFK/MUCS.
An electronic evaporator ensures that the extracted moisture evaporates automatically.
Waste disposal cooler accessory
Item Number
Electronic evaporator tray
MODEL
COLOUR EXTERIOR ETC.
KFK/1CS ** stainless steel (AISI 304) KFK/1 ** anthracite KFK/2CS ** stainless steel (AISI 304) KFK/2 ** anthracite machine unit stainless steel KFK/MUCS (AISI 304, 18/10)
COLOUR INTERIOR
SUITABLE FOR # BINS INTERNAL VOLUME
stainless steel (AISI 304) silver-grey stainless steel (AISI 304) silver-grey stainless steel
1 1 2 2
240 litres 240 litres 2 x 240 litres 2 x 240 litres
2 max.
KFK-VL
THERMOSTAT
REQUIRED MACHINE UNIT
DIMENSIONS W x D x H
+2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C
KFK/MUCS KFK/MUCS KFK/MUCS KFK/MUCS
965 x 853 x 1470/1750mm (max)*** 965 x 853 x 1470/1750mm (max)*** 1550 x 853 x 1470/1750mm (max)*** 1550 x 853 x 1470/1750mm (max)***
- +2˚ C / +18˚ C -
fits into all Gamko models
* Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C ** Machine unit KFK/MUCS must be ordered separately. *** Height 1470mm is the machine height, height 1750mm is maximum height when shut-off valve is open.
Professional refrigeration for hospitality trade
GAMKO B.V. ETTEN-LEUR
Gamko BV P.O. Box 274 4870 AG Etten-Leur
T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl
Mon Plaisir 75 4879 AL Etten-Leur The Netherlands
www.gamko.com
GKFK-V1-01/13
No rights can be derived from the information as shown in this brochure. Changes in content, technology and prices reserved. 01/2013
Bottle cooler & freezer counter top
Compact top loader for bottles For fitting in or on the bar counter top For chilling or freezing Ideal for serving out the contents quickly Professional image
Gamko bottle coolers & freezers inset & surface-mounted counter top
Gamko manufactures and supplies convenient coolers and freezers for inset or fitting on the bar counter top. These compact top loaders for bottles, also referred to as counter top coolers/freezers, are plug-ready and ideal for serving chilled wine, liqueur or vodka by glass, at a constant temperature. The cooler provides a good overview on the bottles from above. As a result you can conveniently and quickly see what you are looking for to ensure smooth service behind the bar. In addition, a bottle cooler built into the counter top is a real eyecatcher. And when you combine it with the correct glasses, you give the bar a professional image. Gamko manufactures the bottle cooler & freezer counter top in four variants: for a maximum of ten or twelve 1-litre bottles as a freezer or cooler. The VK/10 model is suitable for inset- and surface-mounting and has a capacity of up to a maximum of ten 1-litre bottles. The VK/12 model has been specially designed for inset and has a capacity of up to a maximum of twelve 1-litre bottles. The interior of both types is made of highgrade stainless steel (AISI 304).
Professional refrigeration for hospitality trade
General characteristics
Bottle cooler & freezer counter top
Plug ready (no separate condensing unit required) For chilling or freezing Cooling capacity 156W * Power consumption 175W* Interior made of high-grade stainless steel Ideal for inset for a professional imago Thermostat Cooling +10° C / +0° C, Freezing +0° C / -15° C
VK/12
Bottle cooler counter top suitable for inset VK/12F
Bottle freezer counter top suitable for inset
VK/10
Bottle cooler counter top suitable for inset and surface-mounting (fitted with rubber feet) VK/10F
Bottle freezer counter top suitable for inset and surface-mounting (fitted with rubber feet)
MODEL FITTING THERMOSTAT EXTERIOR INTERIOR CAPACITY DIMENSION W x D x H DIMENSION W x D x H DIMENSION FOR EXTERNAL INTERNAL INSET W x D
VK/10 VK/10F VK/12 VK/12
Inset** & surface-mounted Inset** & surface-mounted Inset** Inset**
Cooling +10˚C /0˚C Freezing 0˚C /-15˚C Cooling +10˚C /0˚C Freezing 0˚C /-15˚C
* Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C
Chromium steel (AISI 430) Chromium steel (AISI 430) Stainless steel (AISI 304) & Aluzink Stainless steel (AISI 304) & Aluzink
Stainless steel (AISI 304) Stainless steel (AISI 304) Stainless steel (AISI 304) Stainless steel (AISI 304)
10 x 1 litre 10 x 1 litre 12 x 1 litre 12 x 1 litre
510 x 423 x 253mm 510 x 423 x 253mm 501 x 373 x 490mm 501 x 373 x 490mm
- - 350 x 265 x 230mm 350 x 265 x 230mm
499 x 412mm 499 x 412mm 478 x 350mm 478 x 350mm
** Provided adequate ventilation for heat extraction
Professional refrigeration for hospitality trade
GAMKO B.V. ETTEN-LEUR
Gamko BV P.O. Box 274 4870 AG Etten-Leur
T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl
Mon Plaisir 75 4879 AL Etten-Leur The Netherlands
www.gamko.com
GVK-V1-01/13
No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013
Refrigerated display cabinets
For chilled display of pastries, sandwiches and drinks, for instance Hygienic display Display function: seeing makes you buy Also possible for self-service
Gamko refrigerated display cabinets inset & surface-mounted
Gamko manufactures and supplies professional refrigerated display cabinets for inset or surfacemounting on a bar or buffet. These compact display cabinets are plug ready and are perfect for inviting and refrigerated display, for example, of pastries, sandwiches or drinks in a bottle, cup or glass. Thanks to the high-quality machine unit and the outstanding air circulation, a consistent low temperature is created right throughout the display cabinet. The display cabinets are fitted as standard with built-in lighting. Gamko supplies the refrigerated display cabinets in four models according to volume. Two of these models are fitted with a machine unit on the bottom. This makes it possible to inset them in the bar counter so that their contents can be seen from all sides. As standard the refrigerated display cabinets are fitted with two sliding panes on the serving side and a fixed glass pane on the customer side. The refrigerated display cabinets can be extended on the customer side with sliding panels or acrylic hinged windows to facilitate self-service.
Professional refrigeration for hospitality trade
AV/MS131
190-litre capacity with 2 sliding panels on the serving side
General characteristics refrigerated display cabinets
AV/MS131SD
2 sliding panels on both sides AV/MS131SF
Plug ready (no separate condensing unit required) Fast and consistent refrigeration Outstanding air circulation Energy-saving thanks to the double glazing Energy-saving thanks to 40mm of insulation (polyurethane) Electronic thermostat with digital display Interior and exterior made of chromium steel Lighting Height-adjustable feet Height-adjustable wire mesh shelves Fitted as standard with 2 sliding panels on the serving side and a fixed pane on the customer side Option: can be extended by fitting sliding panes on the customer side (for self-service) Option: can be extended by fitting 2 or 3 acrylic hinged windows on the customer side (for self-service) Thermostat +2° C / +18° C
2 sliding panels on the serving side and 2 hinged windows on the customer side
AV/MS131H
305-litre capacity with 2 sliding panels on the serving side AV/MS131HSD
2 sliding panels on both sides AV/MS131HSF
2 sliding panels on the serving side and 3 hinged windows on the customer side
AV/MU64
135-litre capacity with 2 sliding panels on the serving side AV/MU64SD
2 sliding panels on both sides AV/MU64SF
2 sliding panels on the serving side and 2 hinged windows on the customer side
AV/MU84
180-litre capacity with 2 sliding panels on the serving side AV/MU84SD
2 sliding panels on both sides AV/MU84SF
2 sliding panels on the serving side and 2 hinged windows on the customer side
Refrigerated display cabinet accessories
Item number
Extra wire mesh shelf for AV/MS131(H) Extra wire mesh shelf for AV/MU64 Extra wire mesh shelf for AV/MU84 Shelf support clip (4 no. per shelf required)
004010371 004010378 004010377 013010001
ITEM NO. ITEM NO. ITEM NO. FITTING SLIDING PANES SLIDING PANES SLIDING PANES & & FIXED PANE BOTH SIDES HINGED WINDOWS
INTERNAL COOLING POWER THERMOSTAT VOLUME CAPACITY CONSUMPTOIN
AV/MS131 AV/MS131SD AV/MS131SF AV/MS131H AV/MS131HSD AV/MS131HSF AV/MU64 AV/MU64SD AV/MU64SF AV/MU84 AV/MU84SD AV/MU84SF
1
Conditions: Te = - 5˚C | Tc = + 45˚C | ambient temperature = + 25˚C
surface mounting surface mounting inset** inset**
190 litres 305 litres 135 litres 180 litres
271W 1 587W 1 271W 1 271W 1
245W 1 445W 1 245W 1 245W 1
+2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C +2˚ C / +18˚ C
DIMENSION W x D x H EXTERNAL
DIMENSION W x D x H DIMENSION INTERNAL INSET W x D
1310 x 510 x 540/550/565mm* 1310 x 510 x 815/825/840mm* 642 x 610 x 782/792/807mm* 842 x 610 x 782/792/807mm*
970 x 430 x 460mm 970 x 430 x 735mm 580 x 530 x 435mm 780 x 530 x 435mm
* If both sides sliding panes: add 17mm to the depth.
min. 620 x 530 x 245mm min. 620 x 530 x 245mm
** Provided adequately ventilated for heat extraction.
Professional refrigeration for hospitality trade
GAMKO B.V. ETTEN-LEUR
Gamko BV P.O. Box 274 4870 AG Etten-Leur
T +31 (0)76 - 508 7500 F +31 (0)76 - 508 7529 E sales@gamko.nl
Mon Plaisir 75 4879 AL Etten-Leur The Netherlands
www.gamko.com
GAV-V1-01/13
No rights can be derived from the information as shown in this brochure. Content, technical features and prices subject to change. 01/2013