WORKSHOP
Chain Grinder 25 - 82
Pliers 25 - 16
Special Tools 25 - 27
Oil Suction Unit 25 - 66
Tel: 036-39 09 95 Fax: 036-39 38 95
Kämpevägen 26 553 02 Jönköping
e-post: sales@norddelar.se hemsida: www.norddelar.se
WORKSHOP Excellent accuracy and professional quality! 1
2
3
ANTIFREEZE- AND BATTERY ACID TESTER # 1
Order.no 99-116
2
99-115
3
99-117
Reference.no
Info HYDROVOLT - Battery Acid Tester. Large, easy-to-read scale, compact and sturdy instrument. Automatic air lock prevents fluid loss and air bleed, therefore the bubble-free filling avoids measurement errors. Corrosion-proof, high-quality plastic, w/o metal parts. Scale 0,005 g/ml. HYDROTEMP - Antifreeze Tester. Large, easy-to-read scale, compact and sturdy instrument. Automatic temperature compensation allows accurate readings at all temperatures. Range 0 up to -40 °C. Areoflex 2 in 1 Tester = Battery Acid Tester and Antifreeze Tester. With temperature compensation.
COOLING WATER CAN
1
#
Order.no
1
171-055
Reference.no
Info With two handles and narrow spout for safe pouring and filling.
Volume in L 10
OPERATING HOUR COUNTER - SENDEC ® - Digital
1
2
1
# 1
Order.no 1-931
2
1-158
Reference.no
Function Electrical / Electronic induction Mechanical/ Electronic Vibration
Info Connection to the ignition cable. Digital hour counter in units of 6 mins. Counts up to 19999 hours, then resets automatically to 0 hour. Average life (battery) approx. 10 years. Vibration counter is activated by vibration. Digital hour counter in units of 6 mins. Counts to 19.999 hours, then resets automatically to 0 hour.
2
HOUR COUNTER & ENGINE TACHOMETER - Digital
25
# 1
Order.no 1-935
2
1-930
2
1-934
Reference.no
Info Hour counter & rpm counter for petrol engines. Two functions in one device: 1; Rpm counter function: The red cable is attached to the ignition cable. After starting the engine, the rpm is detected by induction and is shown on the 4-figure LCD display. 2; Hour counter function: After switching off the engine, the hours and minutes of use are shown. (At first every minute is counted up to 59.99 min., then only the full hours are counted). Powered by lithium battery. Life of the hour counter approx. 15,000 hrs. or 5 years. Works without battery (power taken from the short-circuit cable). Long life due to the electromechanical mechanism. Absolutely waterproof. Measurment in hours & tenths of an hour. Automatic reset to 0 after 9999.9 hours. Similar to 1-930, but for Diesel engines. Connecting to the alternator. Power supply 4-40 V DC. = While stocks last.
25 - 2
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
2
3
OPERATING HOURS COUNTER OPPAMA- PET 2000, PET 3000, PET 3200R # 1
Order.no 1-942
2
1-572
3
1-581
Reference.no
Typ PET-3000
Info Temporary-time is resettable. Counts 0:00 to 999:59 hours. Cumulative-time is not resettable counts from 0:00 to 9999:59 hrs. On timeout of both times it resets to 0:00 and/or 0000:00. Battery life approx. 20000 hrs. Dimensions: 44 x 61 x 12 mm. Clamp and/or wrap the supplied cable arround the ignition cable. Counts every minute exactly. PET-2000 Similar to 1-942. Suitable for 2-stroke, 2-cylinder engines. 100 to 30 000 r/min. And 4-stroke, 1+2+4 cylinder engines. 100 to 15000 r/min. Suitable in temperature range: -20 ° C to +60 ° C. PET-3200R A compact hour counter of the ratioparts-brand. Dimensions: 30 x 30 x 15 mm. Weight: 15 g. Max 9999 hours and 59 minutes. Counts the total working hours. Supplied cable to the ignition, with mounting strap. Temperature range: -20 ° C to +60 ° C.
DIGITAL-MULTIMETER ABB-Metrawatt METRAmax 12
1
Order.no 99-107
# 1
Reference.no
Info Voltage measurement: 400 mV...600 V =/~ Flow measurement: 40 mA/400 mA/10 A =/~ Resistance measurements:: 400 Ohm...40 MOhm Capacity: 40 nF...40 µF Frequency: 10 Hz...400 kHz Hold function for storing the measured value.
INFO: D igital multimeter METRAmax 12. Multi-purpose, hand-held measurement device with digital display for professional applications. Suitable for use in the areas of electrical engineering and general electronics. Diode and continuity test, hold and min./max. functions, switchable input resistance for voltage measurement 10 MOhm / 400kOhm, 4000 digits with bar graph, VDE and GS label, case with inclination prop and winding device. Voltage measurement DC/AC: 0.4 / 4 / 40 /400 / 600V.
1
2
3
ENGINE TACHOMETER - Digital #
Order.no
1
1-573
Engine speed, rpm 100 - 19980
2
99-203
100 - 19900
3
99-211
-
Reference.no
Info For measurement of all engines, from 1-cylinder 2-stroke up to 8-cylinder 4-stroke. Dimensions: (L x W x H) 120 x 62 x 13 mm. Weight: 74 g. Accuracy: up to 10 U /. Incl. freehand sensor for attachment to the ignition. Compact, digital engine tachometer SIC - RF-4. Measurement of 2- or 4-stroke single-and multi-cylinder engines. With one or two spark per revolution. Precise measurement accuracy up to 100 rpm! Super easy to use. Contactless measurement, or with sensor cable. Replacement Cable for Order.no. 99-203 (SIC - RF-4)
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 3
25
WORKSHOP TACHOMETER - mechanical - TREYSIT
1
#
Order.no
1
1-591
1
Reference.no
Replacing the Info Orig.-order.no 019200E To all combustion engines of all kinds. Range:800-50000 rpm. High accuracy.
Matching manufacturers BRIGGS & STRATTON, FICHTEL & SACHS, HONDA, KOHLER, TECUMSEH
3
4 2
5
8
6
9
7
DECOMPRESSION TESTER - BARITEST # 1
Order.no 99-201
2
99-216
Reference.no
Info BARITEST has been designed to quickly allow without disassembling, the pressure test of the 2 and 4 stroke engine: combustion chamber, the valves, the crankcase, traditional and vibrating diaphragm carburettors. With the help of BARITEST, your workshop will become more professional, reducing fault finding time. Adapter for spark plug thread M14 x 1.26
DIGITAL PRESSURE TESTER - SIC- AP2 # 3
Order.no 99-202
4 5 6 7 8 9
99-206 99-214 99-209 99-226 99-208 99-215
Reference.no
Info The AP-2 is a digital compression tester. Pocket size. Ideal for outdoor service. Tests the compression pressure of 2 - and 4-stroke engines such as chainsaws and bicycles. Max test pressure: 17 bar. The measured values are displayed for 30 seconds on the LCD display. For engines with decompression, please use the BARITEST - Order.no: 99-201 along with the AP-2 for loss pressure measurement. Adapter M18 short thread Adapter M14 long thread Adapter M14 short thread Adapter M14 conical seat Adapter M12 long thread Adapter M10 short and long thread (with spacer)
New and improved version. 2
1
IGNITION SYSTEM TESTER - Ratiotest 2000 N
25
# 1
Order.no 99-000
2
99-091
25 - 4
Reference.no
Info Ratiotest 2000 N allows plain, quick and reliable measurement data of integrated and exterior mounted circuit breaker controlled ignition systems, and electronically controlled ignition systems. Extra features: • Resistance measurement of the primary pole. • Resistance measurement on the secondary pole. • Resistance measurement of switch contact. • Setting the ignition timing points on circuit breaker contacts. • Capacitor test. Flywheel Simulator for testing the electronically controlled ignition coils. Suitable for 99-000.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
2
4
3
IGNITION TESTING INSTRUMENTS #
Order.no
1
99-205
2
99-085
3
1-988
Reference.no
Replica part for manufacturers
Replacing the Orig.-order.no
ZAT-3, OPPAMA, STIHL, 5910 850 4520 UNIVERSAL UNIVERSAL
-
UNIVERSAL
Info Ignition tester “Pulse“, which provides easy and secure information about the status of the ignition system. Adjustable ignition tester. Can be used with all ignition systems from the automotive field for small engines. The size of the ignition voltage are easy to be measured by a mechanism adjustable in range of 0 to 40,000 volts. Through the dark background on the measurement scale, it is easy to determine the magnitude of the voltage and the ignition spark. Very good ground connection through the attached alligator clip. Affordable ignition tester. Suitable for all ignition systems from the automotive industry to small engines. Ensures very good connection to ground through the attached alligator clip.
CARBURETTOR SEAL CHECKER Order.no 99-027
# 4
Reference.no
Info Carburettor tester. Easy to detect leaks, such as possible membrane damage. With built-in pressure pump and pressure gauge.
6
Ballistol: More than only a lubricant!
7
5 2
1
8
4
3
BALLISTOL - SPECIAL LUBRICANTS # 1 2 3 4 5 6 7 8
Order.no 12-314 12-315 12-317 12-318 12-319 12-320 12-321 12-322
Reference.no
Type Oil, liquid Oil, liquid Spray Spray Spray Spray Hand spray Point lubricator
Content in ml 50 500 50 100 200 400 250 15
Info Thanks to the alkaline design, nothing can stop Ballistol lubricant. Ballistol contains basically medicall pure white oil, the same used in medicine. All ingrediens are vegetable, and completely biodegradable. Practical manual spray, to fill with Ballistol lubricants. Practical point lubricator for filling with Ballistol lubricants.
PATTEX - POWER GLUE
1 2
#
Order.no
1
12-252
2
12-253
Reference.no
PATTEXindication Power glue compact Power glue transparent
Content in g 125 125
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Info Contact glue, fast, reliable, and do not drip.
25 - 5
25
WORKSHOP HYLOMAR - SEALING MASS
1
# 1 2
2
6 2
3
Order.no 1-0371 1-038
7
Reference.no
Info Hylomar is a universal permanently plastic sealing mass.
8
9 10
5
Content 40 ml 80 ml
11
12
13
15 14
1 4
LOCTITE
25
#
Order.no
1
12-261
2
12-200
2
1-243
3
12-202
3
1-242
4
12-249
5
1-269
6
12-228
6
12-229
7
12-217
8
12-245
9
12-218
10
12-204
11
12-206
11
12-207
12
1-244
13
1-245
14
1-265
15
12-220
16
12-221
25 - 6
Reference.no
Application
Info
Replacing the Orig.-order.no LOCTITE 248, Medium strength. Stick form. 248, 38267, 540478 LOCTITE 243, Medium strength. 243, 24304, 142506 LOCTITE 243, Medium strength. 243, 24304, Threadlocker. 142506 LOCTITE 270, High strength. Disassembly only after heating to 270, 27016, 300 째 C. 195545 LOCTITE 270, High strength. Disassembly only after heating to 270, 27016, 300 째 C. 195545 Thread sealer. LOCTITE 55, Thread sealer. 55, 32560, 911017 LOCTITE 518, Elastic sealing surface. Medium to high strength. 518, 18967, 142456 LOCTITE 5910, Permanently elastic sealing surface. 958, 5910, Surfaces sealer. 24826, 142511 LOCTITE 5910, Permanently elastic sealing surface. 958, 5910, 23854, 142491 LOCTITE 5368, Sealant and permanently elastic. Black. 5368, 23969, 142495 Elastic join and LOCTITE 5366 like Loctite 5368, but transparent. 5366, 23968, sealer. 142494 LOCTITE 5399, Sealant and permanently elastic. Red. 5399, 23970, High temperature resistant up to 350 째 C. 142496 LOCTITE 603, Retainer, oil tolerant. 603, 16895, 142441 LOCTITE 638, Special bonding product with good filling 638, 63814, capacity of very large gaps. 142619 638, 63830, Bushings / Bearings LOCTITE 638, Special bonding product with good filling capacity of very large gaps. 135518 glue and fill. LOCTITE 648, Universal glue product, good gap filling capacity. 648, 64832, 135525 LOCTITE 660, Large gap filling capacity. 660, 66046, 234919 LOCTITE 401, Universal glue (Cyanacrylat). 401, 40120, 142575 409, 454, Glue with an immedi- LOCTITE 454, Universal glue (Cyanacrylat), gel form. 45420, 142597 ate adhesive. LOCTITE 406+770, Rapid glue 406 (Cyanacrylat) and 18970, 142457 Primer 770.
Content 19 g 10 ml 50 ml 10 ml 50 ml 80 g = 150 m 50 ml 50 ml 300 ml 310 ml 310 ml 310 ml 10 ml 10 ml 50 ml 50 ml 50 ml 20 g 20 g 20 / 10 g
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 17
19
18
20 21
22
16
25 23
26
24
28 27
LOCTITE #
Order.no
17
12-209
18
12-251
Reference.no
Application
Structural Bonding 19
12-248
20
12-222
21
12-231
22
12-244
23
12-250
24
12-241
25
12-242
26
12-236
27
12-237
28
12-267
Lubricate, dissolve, protect. Repair with epoxy liquid metal
Info
Replacing the Orig.-order.no 3430, 25399, 29684, 142517 3450, 29690, 241867 3463, 31983, 265628 19385, 135288
Content
8201, 25434, 26521, 458642 24315
400 ml
7063, 24783, 88344 LOCTITE 7200 Glue / Gasket Remover. 7200, 31034, 235323 LOCTITE 7850 „FAST ORANGE“: Natural hand cleaner made 7850, 29598, from citrus peel extracts. Biodegradable. 195844 LOCTITE 7850 „FAST ORANGE“: Natural hand cleaner made 7850, 18822, from citrus peel extracts. Biodegradable. 29621, 195845 LOCTITE 7855: Effective hand cleaner for spray painters, me- 7855, 22446, chanics and home improvements. Biodegradable and non-toxic. 31031, 235321 LOCTITE Teroson fabric-repair tape. Heat resistant from -5 ° C 5080 to +70 ° C. Pressure-resistant to 4 bar. Width 50 mm.
400 ml
LOCTITE 3430, Epoxy glue, high strength bonding, sealing compound. LOCTITE 3450, Universal Epoxy glue metal. For large, wide gaps. LOCTITE 3463, Metal-Magic-Steel-Stick. Very high viscosity, 2-component-Rep.-Material. LOCTITE 330+7388 2-component glue with high tensil strength. LOCTITE 8201, Universal lubricant, silicone-free. LOCTITE Chemical Metal: 2-component filler. Quick hardening. LOCTITE 7063 Quick cleaner spray.
Surface preparation
Hand Cleaners
Repair tape
24 ml 25 ml 114 g 50 / 40 ml
85 / 6 g
400 ml 400 ml 3l 400 ml 50 m
Tools for Life The complete assortment see Gedorewww. ratioparts.com
Tools from GEDORE offer quality to the highest standards. Each piece is carefully selected and rigorously analyzed Hot forged stainless steel. Experienced specialists guarantee careful Curing and handling. Here, the requirements of DIN and ISO standards are exceeded.
Tools for Life, which sets new standards in precision and reliability. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 7
25
WORKSHOP 2
4 3
1
Price advantage to use! A order of 36 pieces, we deliver the promotional display box!
5
Price advantage to use! A order of 24 pieces, we deliver the promotional display box!
6 7
Price advantage to use! A order of 24 units we can offer in the promotional display box!
Incl. practical spray bottle!
WD-40 #
Order.no
1 2 3 4 5 6 7
12-947 12-947 12-953 12-953 12-948 12-948 12-977
Reference.no
Packing unit Piece V.-Pck. Piece V.-Pck. Piece V.-Pck. Piece
QTY / pack 1 36 1 24 1 24 1
Content in ml 250 250 400 400 450 450 5000
Info
Easy and quick application. Excellent penetration into pores and cracks. Reaching inaccessible places. Uniform distribution, even in cavities.
Especially suitable for treating large areas. Applied by dipping, by spraying or brushing. Economic 5 liter cans. Incl. convenient spray!
INFO: W D-40 “Smart Straw“. For easy and precise spraying. With hinged tube on the spray head!
2 1
Price advantage to use! A order of 12 pc, we provide the practical counter display! For more information: www.ratioparts.com
WD-40 - 3-IN-ONE ® PROFESSIONAL # 1 2
25
25 - 8
Order.no Reference.no Packing unit 12-990 Piece 12-990 V.-Pck.
QTY / Description pack 1 Universal 12 Lithium Grease
Content Short description
1 kg
Based on hydrocarbon solvent / lithium grease. Colorless, odorless. Application by brush or spatula.
Usage
Info
Water and pressureLong-term lubrication of resistant multi-purpose metals to reduce friction lithium based grease. For and wear due to corrosion protection against friction, and chemical influences. wear and corrosion.
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 4
6
3
8
10
7
5
12
9
11
Price advantage to use! A order of 12 pc, we provide the practical counter display!
WD-40 - 3-IN-ONE 速 PROFESSIONAL # 3 4
5 6
Order.no Reference.no Packing unit 12-992 Piece 12-992 V.-Pck.
12-988 12-988
Piece V.-Pck.
QTY / Description pack 1 12
1 12
7 8
12-987 12-987
Piece V.-Pck.
1 12
9 10
12-991 12-991
Piece V.-Pck.
1 12
11 12
12-989 12-989
Piece V.-Pck.
1 12
Content Short description
Spray. Based on hydrocarbon solvent / lithium grease. Color: white. White Grease 400 ml Odor: characteristic/citrus. Propellant: propane / butane. Without Smart Straw (Application for large areas). Spray. Based on hydrocarbon solvent / soybean oil. Color: colorless. Odor: Engine characteristic / solvent. 400 ml Quick Start Propellant: propane / butane. Without Smart Straw (works only in conjunction with air). Spray. Based on hydroHigh carbon solvent / white oil. performance Color: colorless. 400 ml rust remover Odor: Solvent / citrus. Propellant: propane / butane. Smart Straw. Universal Cleaner
Silikon Spray
Spray. Based on hydrocarbon solvents / surfactants. Color: colorless. 400 ml Odor: characteristic / solvent. Propellant: propane / butane. Smart Straw. Spray. Based on hydrocarbon solvent / silicone oil. Color: colorless. 400 ml Odor: Solvent / citrus. Propellant: propane / butane. Smart Straw.
Usage
Info
Long-term lubrication of metals to reduce friction and wear due to rust and chemical influences.
Adhesion-resistant and long lasting lubricant, with extremely high resistance against water pressure.
Gentle engine start. For special cold and high humidity conditions.
Engine starting assistance. With low ignition point. Good lubricant additives in cold and humid conditions.
Dissolves rusted parts, crowding out humidity, lubricates and protects.
Fast-acting rust remover with high penetrating power for loosening rusted and blocked locations.
Cleans machines, components, and tools of all kinds of dirt, glue residues, oil, grease, etc. For safe use on metals and plastics.
Washable and quick drying cleaner that stubborn fat, oil and dirt layers of metal and stiff plastic surfaces. Dissolves quickly and efficiently.
Lubricants and release agents, heat sink, protection and care for plastics, rubber and metals.
Quick-drying and colourless lubricant. Cleaning and lubricates plastics, rubber and metals.
VE = Packing unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 9
25
WORKSHOP 1
2
3
4
Price benefits to use! Order 6 pieces, we deliver a great price! CLEAN MX 14 - UNIVERSAL CLEANER #
Order.no
1 1 2 2 3 3 3
12-930 12-930 12-931 12-931 12-933 12-934 12-935
Reference.no
Packing unit Piece Carton Piece Carton Can
QTY / pack 1 6 1 6 1 1 1
Content in Liter 0,5 6 x 0,5 1,0 6 x 1,0 5,0 10,0 20,0
Info Spray bottle, refillable, for easy and ideal distribution. Bottle with screw top. Suitable for refilling a spray bottle. Can. For large scale users.
INFO: A llows cleaning of stubborn oil stains on fabrics. Clean MX 14 is biodegradable, phosphate free and is not toxic or (Safe Transport) flammable substance. Easy to dilute with water in suitable proportions. Use: Forestry, Agriculture, Auto, Home, Hobby, Manufacturing, etc.
RAPID MX 14 - DEGREASER #
Order.no
4
12-938
1
Reference.no
2
Packing QTY / Content unit pack in Liter Kanister 1 10L
3
Info Particularly strong grease and grime solvers, which dissolves oil, grease and removes stubborn dirt quickly and accurately. For cleaning machines and engines, parts, workbenches, tools, dirty garage equipment, floors, tiles and many more surfaces. Can also be used as an additive for steam cleaners and pressure washers.
4
5
6
Price benefit to use! Article 12-955 (24 pieces) and article 12-954 (24 pieces) are available in the economy. When ordering please specify the quantity of items!
SPRAYS and LUBRICANTS “A - Z“ # 1 1 2 2 3 3 4 4 5 5 6 6
25
25 - 10
Order.no Reference.no Packing unit 12-973 Piece 12-973 V.-Pck. 12-978 Piece 12-978 V.-Pck. 12-958 Piece 12-958 V.-Pck. 12-968 12-968 12-974 12-974 12-962 12-962
Piece V.-Pck. Piece V.-Pck. Piece V.-Pck.
QTY / pack 1 12 1 12 1 12
Description
1 12 1 12 1 12
High performance grease
Based on the lithium grease with PTFE (Teflon) solid lubricant. Permanent lubrication of all friction parts.
Cooling spray
Makes a rapid cooling down to -50 ° C.
Chain spray
Spin-resistant, high-quality super-adhesive grease. Ideal for fast-running chains such as on motorcycles, go-carts, etc.
V-belt spray Break cleaner Sealant Remover
Info
Content in ml 300 Effectively prevents slippage of belts on the pulley 12 x 300 500 For quick, residue-free removal of residues on brakes, friction materials, etc. 12 x 500 300 Effective solvents for removal of seals, glues, paints and debris. Do not use 12 x 300 on plastic surfaces. 300 12 x 300 400 12 x 400 200 12 x 200
VE = Packning unit; V.-Pck. = Economy Pack. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
7
12
11
8 9
15
13
16
17
14
18
10
SPRAYS and LUBRICANTS “A - Z“ # 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18
Order.no Reference.no Packing unit 12-976 Piece 12-976 V.-Pck. 12-966 Piece 12-966 V.-Pck. 12-955 Piece 12-955 V.-Pck. 12-954 Piece 12-954 V.-Pck. 12-927 Piece 12-927 V.-Pck. 12-926 Piece 12-926 V.-Pck. 12-964 Piece 12-964 V.-Pck. 12-972 Piece 12-972 V.-Pck. 12-969 Piece 12-969 V.-Pck. 12-960 Piece 12-960 V.-Pck. 12-925 Piece 12-925 V.-Pck. 12-975 Piece 12-975 V.-Pck.
QTY / pack 1 12 1 12 1 24 1 24 1 12 1 12 1 12 1 12 1 12 1 12 1 12 1 12
Description
Info
Content in ml 200 Universall substance: cleaner, penetrating oil, lubricants, water displacer, Contakt 40 engine starter and corrosion protection. 12 x 200 200 Contact cleaner spray dissolving oxide and cleansing effect, ensures an Contakt 60 uninhibited current flow and contact resistance are eliminated. 12 x 200 From -30°C to +1100°C. Suitable for thermally highly stressed components, 100 Copper paste such as disc brakes, exhaust systems, spark plugs threads, etc.. 24 x 100 100 From -35°C to +135°C. Lubrication of sliding and antifriction bearings, Long-life grease tie rod joints, universal joints and gimbal with MOS2. 24 x 100 200 Start-Up To start engines with poor throttle response. Engine start help 12 x 200 200 Cleaning + For dissolving rust and displaces water away on electrical contacts very Maintenance Spray well. 12 x 200 500 Quick cleaner Quick Cleaner for removing dirt on brakes, clutches, transmissions, etc 12 x 500 200 Highly acidic oil spray. Silicone free with the best corrosion protection. Oil spray Ideal for control cables, etc. 12 x 200 Spin-resistant, high-quality super-adhesive grease. Ideal for solid-running 500 Chain spray chains, such as on motorcycles, go-carts, etc. 12 x 500 400 Welding Silicone-free protective gas, for welding equipment. protection spray 12 x 400 300 For optimum cleaning of carburetors, fuel pumps, etc. With a spray tube Carburetor cleaner for precision spraying. 12 x 300 400 Galvanic corrosion protection with 95% pure zinc content and Zinc conductivity. Making it ideal for welding and sheet metal work. 12 x 400
KNIPEX - HIGH LEVERAGE COMBINATION PLIERS 1
#
Order.no
1 1 1
99-600 99-601 99-602
Reference.no
Manufact.no Head
Handle
02 06 180 02 06 200 02 06 225
Insulated with two-color dual component handle
chrome plated
Weight in g 240 335 405
Length in mm 180 200 225
INFO: D IN ISO 5746, for rough conditions. 35% power savings with new improved design. Soft gripping zones, for flat and round materials for varied applications. With cutting edges for hard and piano wire, long cutting edges for thicker cables. Cutting edges extra induction hardened, and hardness approx HRC 64. Manufactured from high grade tool steel, oil hardened and tempered.
VE = Packning unit; V.-Pck. = Economy Pack. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 11
25
WORKSHOP 1
2
3
KNIPEX - COMBINATION PLIERS #
Order.no
1 1 1 1 1 2 2 2
99-603 99-604 99-605 99-606 99-607 99-608 99-609 99-610
Reference.no
Manufact.no 03 01 140 03 01 160 03 01 180 03 01 200 03 01 250 03 06 160 03 06 180 03 06 200
Head
Handle
black atramentized
Coated with plastics
chrome plated
insulated with two-color dual component handle
Weight in g 110 180 220 280 480 220 265 335
Length in mm 140 160 180 200 250 160 180 200
INFO: D IN ISO 5746. With gripping zones for flat and round materials. Varied applications, with cutting edges for soft and hard wire, long cutting edges and thicker cables. Cutting edges extra induction hardened, and hardness approx HRC 60. Manufactured from high grade tool steel, oil hardened and tempered
KNIPEX - INSULATION STRIPPERS #
Order.no
3
99-611
Reference.no
Manufact.no
Top
Handle
11 06 160
chrome plated
insulated with two-color dual component handles.
Weight in g 165
Length in mm 160
INFO: F or single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10.0 mm² cable cross section. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. Manufactured from tool steel, forged, oil-hardened
1
2
KNIPEX - AUTOMATIC INSULATION STRIPPER #
Order.no
1
99-612
Reference.no
Manufact.no . 12 62 180
Insulating value in mm² 0,2 - 0,6
Weight in g 180
Length in mm 180
INFO: C ompact standard tool at a favourable price for all current cable cross-sections and insulating materials. For single, multiple and fine stranded cables of 0.2 up to 6.0 mm² with standard insulation. Adapts automatically to the respective cable cross-section; prevents damage to the conductor. High operation comfort thanks to handy shape and low weight. Narrow head style for use in confined areas. With wire cutter for copper an aluminium wires up to 2.5 mm². With adjustable length stop from 6.0 - 18.0 mm for cutting the same stripping lengths during repetitive work. Body: plastic, fibreglass-reinforced. Blades: special tool steel, oil-hardened, interchangeable.
KNIPEX - ELECTRICIANS’ PLIERS #
Order.no
2
99-613
Reference.no
Manufact.no
Handle
13 01 160
coated with plastics
Insulating value in mm² 0,5-0,75 / 1,5 / 2,5
Weight in g 110
Length in mm 160
INFO: T he ideal pliers for cable work. For gripping and bending wire For cutting soft, medium and hard wire. Precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC. With precision stripping holes. For crimping end sleeves (ferrules).Vanadium electric steel; forged, oil-hardened.
25
25 - 12
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2 3
KNIPEX - DIAGONAL INSULATION STRIPPER #
Best.-Nr.
1
99-614
Reference.no
Manufact.no
Head
Handle
14 26 160
chrome plated
insulated with two-color dual component handles
Insulating value Weight in mm² in g 1,5 + 2,5 210
Length in mm 160
INFO: F or electrical installation work. Precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm². Induction hardened precision blades for soft wire up to 4.0 mm dia., cutting edge hardness approx. 60 HRC. Vanadium electric steel; forged, oil-hardened.
KNIPEX - DISMANTLING TOOLS #
Order.no
2 3
99-615 99-616
Reference.no
Manufact.no
Handle
16 20 165 SB 16 29 165
Shock-resistant plastic body -
Insulating value Weight in mm² in g 8,0 - 28,0 80
Länge in mm 130
Info / Suitable for model Stripping tool Replacement blade suitable for Order.no 99-615 (Knipex.no. 16 20 165 SB)
INFO: F or stripping all common round cables. Self-tightening holding lever. With adjusting screw for cutting depth adjustment Turnable blade for circular and longitudinal cutting. Spare blade inside the handle. Secure grip due to soft component material on handle and holding lever to avoid slipping. Housing: plastic, impact-proof. Model 16 20 165 SB: With knife and hook blade, protective cap included.
1
2
3
KNIPEX - FLAT NOSE PLIERS #
Order.no
1
99-617
Reference.no
Manufact.no
Head
Handle
20 06 160
chrome plated
insulated with two-color dual component handle
Weight in g 175
Length in mm 160
Weight in g 150 150
Length in mm 160 160
INFO: D IN ISO 5745, Short, flat jaws. Knurled gripping surfaces. Chrome vanadium electric steel, forged, oil-hardened.
KNIPEX - SNIPE NOSE SIDE CUTTING PLIERS, RADIO PLIERS #
Order.no
2 3
99-618 99-619
Reference.no
Manufact.no
Head
Handle
25 06 160 25 26 160
chrome plated
insulated with two-color dual component handle
INFO: D IN ISO 5745, Suitable for finer gripping and cutting work. Pointed, half-round jaws. Knurled gripping surfaces. With cutting edges for medium hard and hard wire. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. Vanadium electric steel; forged, oil-hardened.
KNIPEX - SNIPE NOSE SIDE CUTTING PLIERS , STORK BEAK PLIERS #
Order.no
2 3
99-620 99-621
Reference.no
Manufact.no
Head
Handle
26 16 200 26 26 200
chrome plated
insulated with two-color dual component handle
Weight in g 205 205
Length in mm 200 200
INFO: D IN ISO 5745, High loadable, elastic precision points. Half-round, long jaws. Knurled gripping surfaces. With cutting edges for medium hard wire max. Ø3.2 mm and hard wire max. Ø2.2 mm. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. Vanadium electric steel; forged, oil-hardened. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated. 25 - 13
25
WORKSHOP
1
2
4
3
6
5
KNIPEX - GRIP PLIERS #
Order.no
1 1 1
99-622 99-623 99-624
Reference.no
Manufact.no
Head
Handle
41 04 180 41 04 250 41 04 300
pliers nickel plated
pliers nickel plated
Weight in g 360 530 930
Length in mm 180 250 300
INFO: H old round, profile and flat material securely. Heavy duty model.. With adjustment screw and release lever. One-hand operation. High clamping pressure due to toggle lever action. Pliers body: rolled steel, high-strength, forged, oil-hardened. Gripping jaws: chrome vanadium electric steel, forged.
KNIPEX - CIRCLIP PLIERS (to assemble internal circlips into bores) #
Order.no
2 2 2 3 3 3
99-631 99-633 99-635 99-632 99-634 99-636
Reference.no
Manufact.no
Head
Handle
44 11 J0 44 11 J1 44 11 J2 44 21 J01 44 21 J11 44 21 J21
polished
coated with plastics
Size of bore, Ø mm 8-13 12-25 19-60 8-13 12-25 19-60
Weight in g 90 90 140 90 90 140
Length in mm 140 140 180 130 130 170
INFO: D IN 5256 C (straight) & DIN 5256 D (bent), For fitting circlips into bores, range of application from Ø 8 - 140 mm. Solid style, forged. Non-slip, solid tips. Pliers body and tips: chrome vanadium steel, forged, oil-hardened.
KNIPEX - CIRCLIP PLIERS (to assemble external circlips on shafts) #
Order.no
4 4 4 5 5 5
99-625 99-627 99-629 99-626 99-628 99-630
Reference.no
Manufact.no
Head
Handle
46 11 A0 46 11 A1 46 11 A2 46 21 A01 46 21 A11 46 21 A21
polished
coated with plastics
Size of shaft, Ø mm 3-10 10-25 19-60 3-10 10-25 19-60
Weight in g 85 85 140 85 85 135
Length in mm 140 140 180 125 125 170
INFO: D IN 5254 A (straight) & DIN 5254 B (bent), For fitting circlips on shafts, range of application from Ø 3 - 140 mm. Solid style, forged. Non-slip, solid tips. Pliers body and tips: chrome vanadium steel, forged, oil-hardened.
KNIPEX - CARPENTERS’ PINCERS #
Order.no
6 6 6 6
99-637 99-638 99-639 99-640
Reference.no
Manufact.no
Head
Handle
50 01 160 50 01 210 50 01 250 50 01 300
polished
coated with plastics
Weight in g 225 415 600 900
Length in mm 160 210 250 300
INFO: D IN ISO 9243, For heaviest duty. Specially favoured by craftsmen for their precise workmanship. Extreme wear resistance and well balanced. Cutting edges additionally hardened; cutting edge hardness approx. 60 HRC. Special tool steel, forged, oil-hardened.
25
25 - 14
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
4
3
5
6
KNIPEX - CONCRETORS’ NIPPERS (Tower Pincers, Steel Fixers’ Nippers) #
Order.no
1 1 1 1
99-641 99-642 99-643 99-644
Reference.no
Manufact.no
Head
Handle
99 01 220 99 01 250 99 01 280 99 01 300
polished
coated with plastics
Weight in g 340 425 485 555
Length in mm 220 250 280 300
INFO: D IN ISO 9242, To twist and cut wire in one operation. Unobtained precision and long service life make these the most widely purchased concretors’ nippers in the world. Cutting edges additionally hardened; cutting edge hardness approx. 61 HRC. High-grade special tool steel, forged, oil-hardened
KNIPEX - END CUTTING NIPPERS #
Order.no
2 2 2
99-645 99-646 99-647
Reference.no
Manufact.no
Head
Handle
68 01 160 68 01 180 68 01 200
polished
coated with plastics
Weight in g 195 275 335
Length in mm 160 180 200
INFO: D IN ISO 5748, With cutting edges for soft and hard wire. Also suitable for twisting and cutting binding wire. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. High-grade special tool steel, forged, oil-hardened
KNIPEX - DIAGONAL CUTTERS #
Order.no
3 3 3 3 3 4 4 4
99-653 99-654 99-655 99-656 99-657 99-648 99-649 99-650
Reference.no
Manufact.no 70 01 110 70 01 125 70 01 140 70 01 160 70 01 180 70 06 140 70 06 160 70 06 180
Head
Handle
polished
coated with plastics
chrome plated
insulated with two-color dual component handle
Weight in g 80 90 125 175 200 160 210 225
Length in mm 110 125 140 160 180 140 160 180
INFO: D IN ISO 5749, The essential cutting tool for versatile use. High quality material and precise workmanship for long service life. Precision cutting edges additionally induction hardened (cutting edge hardness approx. 62 HRC) for soft and hard wire. Clean cutting of thin copper wires, also at the cutting-edge tips. Narrow head style for use in confined areas. Vanadium electric steel; forged, oil-hardened.
KNIPEX - HIGH LEVERAGE DIAGONAL CUTTERS #
Order.no
5 6
99-651 99-652
Reference.no
Manufact.no
Head
Handle
74 06 200 74 06 250
chrome plated
insulated with two-color dual component handle
Weight in g 305 440
Length in mm 200 250
INFO: W ith integrated forged axle for heaviest duty. Suitable for all types of wire including piano wire. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Precision cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Chrome vanadium heavy-duty steel, forged, oil-hardened. Length 250 mm : The 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm² and aluminium conductors up to 35 mm². Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 15
25
WORKSHOP 1
2
4 3
KNIPEX - BOLT CUTTERS #
Order.no
1 2 3
99-658 99-659 99-660
Reference.no
Manufact.no
Head
Handle
71 72 610 71 72 760 71 72 910
grey atramentized with multi-component grips
Weight in g 2590 4285 4985
Length in mm 610 760 910
INFO: C utting capacity up to 48 HRC hardness. Robust cutting edges are additionally induction hardened, cutting-edge hardness approx. 62 HRC. Forged-in stopper with comfortable shock- absorber. Good access due to very flat construction of head and joint area. Ergonomically angled handles to minimise effort. Sturdy non-slip two-colour dual component handle sleeves. Precise adjustment (12 positions) by eccentric bolt. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Bolted cutter head, replaceable. Blade: chrome vanadium heavy-duty steel, forged, oil-hardened. Joint: special tool steel, forged. Handles: steel tube, powder-coated.
KNIPEX - PIPE WRENCHES S-TYPE #
Order.no
4 4 4 4
99-661 99-662 99-663 99-664
Reference.no
Manufact.no
Clamp size in inch 1 1 1/2 2 3
83 30 010 83 30 015 83 30 020 83 30 030
Clamp size in mm 0-42 0-60 10-70 10-120
Weight in g 870 1570 2540 4295
Length in mm 320 420 540 680
INFO: D IN 5234, Slim, S-type jaw. Jaws with offset teeth in opposite direction. Teeth additionally induction hardened. Three-point contact on pipes, self-locking. I-beam handle design. Captive adjusting nut. Red powder coated, jaws bright ground. Chrome vanadium electric steel, forged, oil-hardened.
1
2
KNIPEX - ALLIGATOR, WATER PUMP PLIERS #
Order.no
1
99-665
Reference.no
Manufact.no
Head
Handle
88 06 250
chrome plated
insulated with two-color dual component handle
Size in inch 1 1/2
Weight in g 370
Length in mm 250
INFO: D IN ISO 8976, More output and comfort: 9-notch adjustment positioning for 30 % more gripping capacity. Good access to the workpiece due to slim size in the head and joint area. Box-joint design: high stability because of double guide. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Guard prevents operators’ fingers being pinched. Favourable lever action: optimum transmission of force. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable gripping. Chrome vanadium electric steel, forged, oil-hardened.
KNIPEX - COBRA 2 2 2 2 -
99-666 99-667 99-668 99-669 99-670 99-671
87 01 150 87 01 180 87 01 250 87 01 300 87 01 400 87 01 560
pliers grey atramentized, polished head
non-slip plastic coating
handles plastic coated
1 1/4 1 1/4 2 2 3/4 3 1/2 4 1/2
135 170 300 545 1190 2760
150 180 250 300 400 560
INFO: D IN ISO 8976, Greater gripping capacity but much lower weight than comparable pipe wrenches. Fast push-button adjustment directly on the workpiece, no unintentional slipping of the joint. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable gripping. Box-joint design: high stability because of double guide. Guard prevents operators’ fingers being pinched. Chrome vanadium electric steel, forged, oil-hardened.
25
25 - 16
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
3
4
6 5
KNIPEX - MULTIPLE SLIP JOINT SPANNER “RAPTOR“ #
Order.no
1
99-672
Reference.no
Manufact.no
Head
Handle
87 41 250
polished
non-slip plastic coating
Size Weight in inch in g 3/8 - 1 1/4 315
Length in mm 250
INFO: F or metric and imperial nuts and screws with widths across flats from 10 to 32 mm (3/8“ up to 1 1/4“); self-locking from 17 mm: no slipping on the workpiece. Zero-backlash gripping of metric or imperial hexagonal headed screws, no rounding of bolt heads. Reliable and tight gripping of rounded, rusty, or thick coated bolts and screws. Ideal for work on vehicle brake systems. Quick tightening of bolted connections using ratchet action. Adjustment at the touch of a button directly on the workpiece, also possible with one hand only. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Box-joint design: high stability because of double guide. Reliable catching of the hinge bolt: no unintentional shifting. Favourable lever action: optimum transmission of force. Guard prevents operators’ fingers being pinched. Replaces a set of wrenches, ideal for tightening locknuts. Chrome vanadium electric steel, forged, oil-hardened.
KNIPEX - PIPE CUTTER (for plastic conduit pipes and hoses) #
Order.no
2
99-673
Reference.no
Manufact.no
Head
Handle
90 20 185
chrome plated
tough fibreglass reinforced plastic handles
Size in inch 25
Weight in g 160
Length in mm 185
INFO: F or cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to Ø25 mm / Ø1inch exterior. Not suitable for cutting cables. With opening spring and locking device. Tool body: plastic, fibreglass-reinforced. Blades: special tool steel, oil-hardened, interchangeable.
KNIPEX - SHEET METAL NIBBLER #
Order.no
3
99-674
Reference.no
Manufact.no
Head
Handle
90 55 280
chrome plated
with multi-component grips
Weight in g 560
Length in mm 280
INFO: F or cutting iron, copper or aluminium sheet metal up to max. 1.2 mm thickness, plastic up to max. 2.0 mm thickness. Materials are cut without deformation. Clean cut edges - no trimming activities needed. With chip breaker. Easy handling. Cutting width: 2.7 mm. Tool body: special tool steel, rolled, oil-hardened. Blades: special tool steel, oil-hardened, interchangeable.
KNIPEX - REVOLVING PUNCH PLIERS #
Order.no
4
99-675
Reference.no
Manufact.no
Finish
90 70 220
red powder coated
Weight in g 265
Length in mm 220
INFO: T o punch holes into leather, textiles and plastic material. With six interchangeable punches: Ø 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm. With opening spring and locking device. Powder-coated for reliable protection against rust. Pliers body and punches: special tool steel, oil-hardened.
KNIPEX - PRECISION TWEEZERS (insulated) #
Order.no
5 5
99-676 99-677
Reference.no
Manufact.no
Finish
Info
92 27 62 92 37 64
straight shape, fine serrated grip surfaces Tested according to IEC 60900: 2004, dipped insulated, nickel plated straight shape, serrated grip surfaces
KNIPEX - COMBINATION SHEARS #
Order.no
6
99-678
Reference.no
Manufact.no
Head
Handle
95 05 140
blank polished
extrusion plastic-coated
Weight in g 50
Length in mm 140
INFO: C utting cardboard, plastics, aluminium, brass and copper foils. Not suitable for steel wire or iron sheets. Precision ground, hardened blades. With opening spring and locking device. Guard prevents operators’ fingers being pinched. Shears body: surgical steel, stainless, vaccum-hardened. Handles: plastic. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 17
25
WORKSHOP 1
2
3
4
KNIPEX - CRIMPING PLIERS #
Order.no
1
99-679
Reference.no
Manufact.no
Head
Handle
Usage
97 21 215 C
burnished
with plastic grips
cutting cables, stripping wire
Weight in g 225
Length in mm 215
INFO: F or cutting cables, stripping wire and crimping insulated and non-insulated terminals, connectors and plug type connectors. With threaded holes for cutting copper and brass screws threaded M 2.6 / 3.0 / 3.5 / 4.0 and 5.0 mm. Special steel, high-strength.
KNIPEX - BOWDEN CABLE CUTTER #
Order.no
2
99-680
Reference.no
Manufact.no
Head
Handle
95 61 150
shear black atramentized, plastic coated polished head
Cut size in mm 3
Weight in g 200
Length in mm 150
INFO: F or Bowden cables and soft wire rope up to 3.0 mm dia. (also V2A). Smooth and clean cutting due to special shape of the cutting edges. Sickle shape cutting edges surround the material and prevent the wire rope fanning out. Little handforce required due to very high transmission ratio. With opening spring and locking device. Cutting edges additionally induction hardened. High-grade special tool steel, forged, oil-hardened.
KNIPEX - PLIERS WRENCHES (pliers and wrench in a single tool) #
Order.no
3 4
99-681 99-682
Reference.no
Manufact.no
Head
Handle
86 03 180 86 03 250
pliers nickel plated
plastic coated
Size in inch 1 3/8 1 3/4
Weight in g 260 540
Length in mm 180 250
INFO: A djustable tool for tightening screws. Also excellent for gripping, holding, pressing and bending workpieces. Replaces a set of spanners, metric and imperial. Smooth jaws for cautious installation of plated fittings. Zero backlash jaw pressure prevents damage to edges of sensitive components. Adjustment at the touch of a button directly on the workpiece. Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. Lever transmission greater than 10 : 1 for strong gripping power. Chrome vanadium electric steel, forged, oil-hardened.
1
2
3
4
WERA - SCREWDRIVER SETS
25
# 1
Order.no 99-397
2
99-396
3 4
99-3971 99-406
25 - 18
Reference.no
Info 7-piece TORX速 set and packed in display carton.
Contents TX8 x 60, TX10 x 80, TX15 x 80, TX20 x 100, TX25 x 100, TX27 x 115, TX30 x 115 Flat-Headed and Cross-Headed screwdriver. 6-piece set and rack in Cross-Head: 1 x PH 1x80; 1 x PH 2x100 display carton Flat-Head: 1 x 0,6x3,5x80; 1 x 0,8x4,5x90; 1 x 1,0x5,5x100; 1 x 1,2x7,0x125 4-piece set. TORX速 with holding function, extra long (300 mm) blade TX20 x 300, TX25 x 300, TX27 x 300, TX30 x 300 Wera Kraftform Kompakt Multitool im pouch PH1, PH2, PZ1, PZ2, 1,0x5,5, 1,2x6,5 Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
LASTS A LIFETIME!
2
suitable for
WERA - RATCHET AND BIT SETS WITH NUTS # 1 2
Order.no 99-405 99-4052
2
99-4053
Reference.no
Info Wera - Bit Ratsche A 1/4‘‘ Wera Tool-Check 1 SB, 1/4“ - metric Wera Tool-Check 2 SB, 1/4“ - inch size
Content Bit Ratsche, Nut adapter 1/4“ Bit Ratsche, 1 Rapidaptor-Bit-Holder, 1 Nut adapterr 28 Bits, Flat-Head: 5,5x1,0. Cross-Head: PH1, PH2, PH3. Pozidriv: PZ1, PZ2, PZ3. Torx: TX10, TX15, TX20, TX25, TX30, TX40. Torx with Drill: TX10, TX15, TX20, TX25, TX30. Hexagonal: 3, 4, 5, 6, 8. Nut SW 5.5, 6, 7, 8, 10, 12, 13. Bit-Ratsche, 1 Rapidaptor-Bit-Holder, 1 Nut adapterr, 28 Bits, Flat-Head: 5,5x1,0. Cross-Head: PH1, PH2, PH3. Pozidriv: PZ1, PZ2, PZ3. Torx: TX10, TX15, TX20, TX25, TX30, TX40. Torx with Drill: TX10, TX15, TX20, TX25, TX30. Hexagonal: 3/32“, 1/8“, 5/32“, 3/16“, 1/4“. Inner square: #1, #2, #3. Nut SW 3/16“, 1/4“, 5/16“, 11/32“, 3/8“, 7/16“, 1/2“.
Absolut KEIN Schlag kann die Knarrenmechanik zerstören! 1
2 3
RATCHET WITH HAMMER FUNCTION!
WERA - KOLOSS-RATCHET 1/2“ #
Order.no
1
99-404
2 3
99-4041 99-4042
Reference.no
Info Push-through square drive for forward and reverse operation, fine-tooth ratchet mechanism, small return angle of 6°, can transfer at least 600 Nm of torque, tubular shaft to minimise impact vibrations, drop-forged hammer head, positively pinned, ground striking face. Extension for use with Wera KOLOSS 8002 C to increase torque transfer. Protective attachment for striking faces for use with Wera Koloss 8002 C to protect materials and surfaces. (Set of 2 pieces)
Length in mm 341 341 50 x 50
INFO: THE WORLD‘S FIRST RATCHET YOU CAN USE AS A HAMMER! For more information see www.ratioparts.com Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 19
25
WORKSHOP
Quicker than the Police allows! 1
5° - fine teeth for little return angle.
Free swivel head ratchet, locking at: 0°, 15° and 90° both to left and right.
Flywheel design speeds up screw fastening process
WERA - “ZYKLOP“ RATCHET #
Order.no
1 1 1
99-403 99-399 99-398
Reference.no
Drive 1/4 3/8 1/2
Length in mm 152 199 277
inkl. Sockets in mm 10 + 13 10 + 13 13 + 17
Info For square drive sockets and adapters with square drive. Can be used in 0 °-lock as a conventional screwdriver. Release by press button. Left / right selection. Ergonomic handle-strength form.
1
WIHA - ANGULARLY SCREWDRIVER 1/4“ - 57 Nm - for electric drills and screwdrivers # 1
Order.no 99-472
Reference.no
Info High performance-angle screwdriver in a compact and slim design, with a 105 ° angled head. The manually controlled lock sleeve ensures optimum fit all 1/4“ inserts and according to DIN 3126, ISO1173 Type C 6.3 and E 6.3. The adjustable stabilisation arm is locked in 48 positions. A torque load is possible up to 57 Nm.
Application For use in almost all (battery powered) screwdriver. Ideal for drilling and screwdriving in places with difficul access
INFO: R ated in the journal „home improvement practices“, 5/2008 with the overall grade of 1.4. See the review articles next to the photo.
1
2
WIHA - BIT SETS # 1
Order.no 99-431
2
99-432
Reference.no
Description WIHA-XSelector, 11-pieces WIHA-Bit-Box 31-pieces
Contents Universal Bit Holder, magnetic, shape: E 6,3. 1xT7H, 1xT8H, 1xT9H, 1xT10H, 1xT15H, 1xT20H, 1xT25H, 1xT27H, 1xT30H, 1xT40H. Bit Holder 1/4‘‘ magnetic. Flat-Head: 4,5 x 0,6, 5,5 x 0,8, 6 x 1. Cross-Head: PH1, PH2, PH3. Pozidriv: PZ1, PZ2, PZ3. Torx: T10, T15, T20, T25, T30, T40. Hexagon socket: 3, 4, 5, 6.
INFO: B ox of high quality plastic with simples bit collection. 25 mm standard bits. No. 99-431 suitable for Torx screws with and without a safety pin.
25
25 - 20
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
WIHA - GRIPPER-KIT # 1
Order.no 99-380
2
99-381
Reference.no
Drive 3/8‘‘
3/8‘‘
Info SW in mm The ideal companion in the tool kit of lawnmowers, motorcycles, bicycles and cars. Replaces nuts SW7 - SW19 from 7 mm to 19 mm. Regardless of whether inch or metric dimensions. The 54 steel pins fit every nut or screw with an external profile. For screws up to a height of 8 mm. The Gripper also works on hooks or eyebolts. Enables a torque transmission of up to 80 Nm. Material: Housing made from alloyed steel. 54 spring-loaded hardened steel pins. Content: Gripper nut driver 3/8“, Ratchet 3/8“, Adapter 3/8“. Wiha - Gripper nut driver. SW7 - SW19
WIHA - CROSS-HEADED SCREWDRIVER
1
#
Order.no
1 1 1 1 1
99-382 99-383 99-384 99-389 99-390
Reference.no
Size 1 2 3 PZ1 PZ2
Length in mm 80 100 150 80 100
INFO: B lade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop® finish on tip for a perfect fit every time. Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN ISO 8764. Application: Best suited for turning screws in wet and oily applications.
WIHA - FLAT-HEADED SCREWDRIVER
1
#
Order.no
1 1 1 1 1
99-336 99-337 99-338 99-339 99-340
Reference.no
width of blade in mm 4,5 5,5 6,5 8,0 10,0
Length in mm 90 100 125 150 175
INFO: B lade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop® finish on tip for a perfect fit every time. Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Standards: DIN 5265, DIN ISO 2380. Application: Best suited for turning screws in wet and oily applications.
WIHA - BALL AND HEXAGONAL SCREWDRIVER - SoftFinish ® Grip
1
#
Order.no
1 1 1 1 1
99-391 99-392 99-393 99-394 99-395
Reference.no
Size in mm 3 4 5 6 8
Length in mm 100 100 100 125 150
INFO: B lade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Application: For all screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 21
25
WORKSHOP WIHA - HEXAGONAL KEY - metric - with Wiha T-Handle #
Order.no
1 1 1 1 1 1
99-308 99-309 99-310 99-311 99-357 99-312
Reference.no
1
Size in mm 3 4 5 6 7 8
Length in mm 200 200 200 200 200 200
INFO: B lade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha Classic T-handle. Application: For high torque transfer with minimal effort.
WIHA - HEXAGONAL KEY - Inches - with Wiha T-Handle
1
#
Order.no
1 1 1 1 1 1 1 1 1 1
99-313 99-314 99-315 99-316 99-317 99-318 99-319 99-320 99-321 99-322
Reference.no
Size Inch 3/32‘‘ 7/64‘‘ 1/8‘‘ 9/64‘‘ 5/32‘‘ 3/16‘‘ 7/32‘‘ 1/4‘‘ 5/16‘‘ 3/8‘‘
Length in mm 150 150 150 150 150 150 150 150 150 150
INFO: B lade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha Classic T-handle. Application: For high torque transfer with minimal effort.
WIHA - HEXAGONAL SOCKET WRENCH - metric - with Wiha T-Handle 1
#
Order.no
1 1 1 1
99-323 99-324 99-325 99-326
Reference.no
Size in mm 7 8 10 13
Length in mm 200 200 200 230
INFO: H exagon nut driver. Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha Classic T-handle. Application: For high torque transfer with minimal effort.
WIHA - HEXAGONAL SOCKET WRENCH - metric - with Wiha MicroFinish handle 1
#
Order.no
1 1 1
99-371 99-372 99-373
Reference.no
Size in mm 7 8 10
Length in mm 125 125 125
INFO: B lade: Chrome-vanadium steel, through hardened, chrome-plated. Deep drawn socket. Handle: Nonslip Wiha MicroFinish handle with roll-off protection. Standards: DIN 3125. Application: Best suited for turning screws in wet and oily applications.
WIHA HEXAGONAL SOCKET WRENCH - Inches - with Wiha T-Handle 1
#
Order.no
1 1 1 1 1 1
99-327 99-328 99-329 99-330 99-331 99-332
Reference.no
Size Inch 3/16‘‘ 1/4‘‘ 5/16‘‘ 3/8‘‘ 7/16‘‘ 1/2‘‘
Length in mm 150 150 150 150 150 150
INFO: H exagon nut driver. Blade: Chrome-vanadium steel, through hardened, nickel-plated. Handle: Wiha Classic T-handle. Application: For high torque transfer with minimal effort.
25
25 - 22
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP WIHA - TORX ® KEY - with Wiha T-Handle 1
#
Order.no
1 1 1 1 1 1 1 1 1
99-300 99-301 99-302 99-303 99-304 99-356 99-305 99-306 99-307
Reference.no
Size T 10 T 15 T 15 T 20 T 25 T 27 T 30 T 40 T 50
Length in mm 100 100 200 200 200 200 200 200 250
Info Suitable for STIHL-Nr. 5910 890 2400 -
INFO: B lade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha Classic T-handle. Application: For high torque transfer and minimal effort. Extra: ChromTop® blade tip for the highest accuracy.
WIHA - TORX ® - SCREWDRIVER 1
#
Order.no
1 1 1 1 1 1 1 1
99-344 99-345 99-346 99-347 99-348 99-349 99-350 99-351
Reference.no
Size T9 T 10 T 15 T 20 T 25 T 27 T 30 T 40
Length in mm 60 80 80 100 100 115 115 130
INFO: B lade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop® finish on tip for a perfect fit every time. Handle: Non-slip Wiha MicroFinish handle with roll-off protection. Application: Best suited for turning screws in wet and oily applications.
WIHA - TORX ® - TAMPER RESISTANT SCREWDRIVER
1
#
Order.no
1 1 1 1
99-375 99-377 99-378 99-376
Reference.no
Size T 10 T 15 T 20 T 25
Length in mm 80 80 100 100
INFO: B lade: High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop® finish on tip for a perfect fit every time. With borehole in the blade tip. Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection.
WIHA - KEY SETS - Torx, metric or Inches 1
2
3
# 1
Order.no 99-333
2
99-334
3
99-335
Reference.no
Info TORX® L-key set in holder, 9 pieces. Hexagon ball end L-key set in Classic holder. 9 pieces. Hexagon ball end L-key set in Classic holder. 8 pieces, Inch size.
Size T8, T9, T10, T15, T20, T25, T27, T30, T40. in mm: 1,5; 2,0; 2,5; 3,0; 4,0; 5,0; 6,0; 8,0; 10,0. Inch size: 5/64‘‘; 3/32“; 1/8“; 5/32“; 3/16“; 7/32“; 1/4“; 5/16“.
INFO: Q uick Grip Ready! Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX® screw applications in confined work spaces. Extra: Popular key sizes kept in a well-organised holder.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 23
25
WORKSHOP
It rotates... Since more than 25 years! Nut (plural: nuts), is a piece of, usually made of metal, with internal thread into which a screw fit. Nuts tend to be outside the six-sided and designed to be screwed with a wrench. Source: Wikipedia
1
3
2
4
WIHA - CLASSIC CIRCLIP PLIERS for inner rings (bores) #
Order.no
1 1 1 2 2 2
99-8511 99-8521 99-8501 99-8531 99-8541 99-8551
Reference.no
Description
Info
Form C, Straight shape Crclip pliers for bores (inner) DIN ISO 5256 Form D, 90° angled shape
Length in mm 140 180 140 140 140 180
Ring span in mm 12-25 19-60 8-13 8-13 12-25 19-60
Length in mm 185 140 140 185 140 140
Ring span in mm 19-60 10-25 3-10 19-60 10-25 3-10
WIHA - CLASSIC CIRCLIP PLIERS for outer rings (shafts)
25
#
Order.no
3 3 3 4 4 4
99-8611 99-8601 99-8591 99-8581 99-8571 99-8561
25 - 24
Reference.no
Description
Info
Form B, 90° angled shape Circlip pliers for outer rings (shafts) DIN ISO 5254 Form A, Straight shape
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP WIHA - SEAL SCRAPER 1
#
Order.no
1
99-083
Reference.no
Ø Length Totalin mm in mm Length in mm 270 150 260
Length Blade in mm 150
Width in mm 25
Width Blade tip in mm 25
INFO: B lade: Chrome-vanadium steel, through hardened, chrome-plated. Handle: Wiha Power handle, impact, oil and grease resistant. Application: For easy removing of sealing materials, e.g. in automotive applications
SCRIBER - CARBIDE TIPPED 1
#
Order.no
1
6800-0000
Reference.no
Packing unit Piece
QTY / pack 1
Length in mm 200
INFO: S ingle packaged in PVC cover.
2
1
3
CAROLUS - SOCKET SET # 1
Order.no 400-477
2
400-478
1/4‘‘
3
400-490
1/4‘‘ / 1/2“
Reference.no
Driving Info 1/4‘‘ Contents: Reversible ratchet 1/4“ with 2-component handle. Sockets: Hexagon 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 and 13 mm. Screwdriver bit sockets: Hexagon 3, 4, 5, 6, 8 and 10 mm. Flat-Head: 4 - 5.5 and 6.5 mm. Cross-Head: PH- 0- 1- 2- 3- Accessories: Extensions 50 mm and100 mm. Universal joint. Sliding T-handle. Minimus® interchangeable handle with hex shaft 1/4“ sq. dr. Adaptor: 1/4“ sq. dr. x 1/4“ hex dr. Contents: Readyflex® ratchet 1/4“. Particularly suitable for barely accessible places. Sockets: Hexagon 4 - 4.5 - 5 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 and 13 mm. Screwdriver bit sockets: Hexagon 3 - 4 - 5 - 6 - 8 - 10 mm. Flat-Head: 4 - 5.5 and 6.5 mm. Cross-Head: PH 0 - 1 - 2 - 3 Accessories: Extensions 50 mm and 100 mm. Universal joint: Sliding T-handle. Minimus® interchangeable handle with hex shaft 1/4“ sq. dr. Adaptor 1/4“ sq. dr. x 1/4“ hex dr. Bit adaptor 1/4“ with magnet. Contents: Reversible ratchet 1/2“ with 2-component handle. 1/2“ Sockets hexagon 10 - 11- 12 - 13 - 14 - 15 - 16 17 - 18 - 19 - 21 - 22 and 24 mm. Extensions 1/2“ 75 mm, 125 mm and 250 mm. Universal joint 1/2“. Adaptor 1/2“ sq. dr. x 5/16“ hex dr., can also be used as 8 mm socket. Tools on module: Ratchet 1/4“ with 2-component handle. 1/4“ Sockets hexagon 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 and 13 mm. Screwdriver bit sockets 1/4“: Hexagon 4 - 5 - 6 - 8 mm. Flat-Head: 5.5 mm. Cross-Head:PH 2. Pozidriv: PZ 2. TORX® with hole TXB10 - TXB15 - TXB20 - TXB25 - TXB27 - TXB30 - TXB40. Extensions 1/4“ 50 mm and100 mm. Universal joint 1/4“.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 25
25
WORKSHOP
3
1
6
4
5 2 Order.no. 1-043, but in SB-pack.
Order.no.181-118, but in SB-pack.
SPARK PLUG WRENCH #
Order.no
1 2 3 4 5 6
181-120 1-043 810-047 181-119 181-118 810-042
Reference.no
SW in mm 16/21 19/21 19/21 19/21 19/21 19/21
Length in mm 150 100 100 170 38 38
Info
Spark plug wrench 21 x 19 x 38; 3/8 for oil drain plug to Briggs & Stratton.
F
Packing unit Stück Stück SB-Pck. Stück Stück SB-Pck.
QTY / pack 1 1 1 1 1 1
2
1
3
B
D
E
C A
SPARK PLUG WRENCH for brushcutters #
Order.no
1 1 2 1 1 1 2 1 1 2 1 1 2 1 1 1 1 1 1 1
181-116 181-105 810-043 181-107 181-100 181-109 810-044 181-101 181-103 810-045 181-102 181-111 810-046 181-106 181-110 181-115 181-108 181-104 181-112 181-117
Reference.no
A in mm 10 10 10 11 11 13 13 13 13 13 13 13 13 14 15 15 16 17 17 -
B in mm 16 19 19 16 19 16 16 19 19 19 19 21 21 19 19 21 19 19 21 19
C in mm 88 65 65 115 65 80 80 68 55 55 85 70 70 73 63 62 79 65 70 50
D in mm 55 40 40 90 42 40 40 50 21,5 21,5 52 36 36 54 40 38 54 32,5 34 36
E in mm 140 140 140 140 140 160 160 160 160 160 140 140 140 140 140 140 140 140 140 205
F in mm 7 7 7 8 7 8 8 8,3 8 8 8 8 8 8 8 8 7 7 8 T 27
INFO: B est.-Nr. 181-117: Part suitable to replace STIHL Orig.-Order.no 4119 890 3400.
OIL FILTER WRENCH
25
#
Order.no
3
99-042
25 - 26
Reference.no
Suitable for filter-Ø. 63,5 bis 114 mm
Info With this tool you reache locations that you can not achieve with conventional tools. Comfortable vinyl handle. Due to the sharp teeth of the sliding of the filter is prevented. VE = Packning unit; SB.-Pack. = Self-service package Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
2
4 3
1
5 6 Feeler gauge for setting the valve clearances, electrode distance on spark plugs, etc.
Flexible blade!
SCREWDRIVERS - FOR CARBURETOR-ADJUSTMENT #
Order.no
1
181-000
1
181-0001
for Walbro- and Zama-carburetor, star-shape for Walbro- and Zama-carburetor, D-shape
1
181-0002
for Walbro- and Zama-carburetor, twin-D-shape
1
181-0003
for Walbro- and Zama-carburetor, notch-shape
Reference.no
Info
MULTI-FUNCTION TOOL FOR CHAIN SAWS # 2
Order.no 96-128
Reference.no
Info 1 screwdriver for adjusting the chain tension. T27 Torx wrench for all screws to STIHL chainsaws. 1 screwdriver for chain oil / mixture adjustment. SW 4-inside/6-head for ECHO and Husqvarna chainsaws. 13 mm socket wrench. Reversible pipe wrench SW 19 / SW 16 for spark plugs on all chainsaws. Included a nylon bag, for attaching to belt. Can also be used as a file handle.
MULTI-FUNCTION TOOL FOR SPARK PLUGS # 3
Order.no 96-129
Reference.no
Info Should be in every toolbox! 8 tools and 1 Spark plug walnut - size: 16, 19, 21 mm, brass brush for cleaning the electrode, metal file, needle cleaning and adjusting gauge for electrode spacing. With soft-grip for pleasant work.
SPECIAL SCRAPER TO CLEAN MOWER DECK # 4
Order.no 96-003
5
96-0031
Reference.no
Info Removes easily and quickly sticked grass, etc. Flexible, rounded steel plate prevents “sticking“ as in “normal“ scrapers. A long, stainless steel blade. Removes easily and quickly sticked grass, etc. Adjustable blade to scrap or scratch.
GEDORE - FEELER GAUGE SET # 6
Order.no G654752
6
G654779
6
G654787
Reference.no
Info With protective handle, folding, blade length 100 mm, Handle nickel-plated. Blade thickness/Size: 5, 10, 15, 20, 25, 30, 40, 50/100 mm. With protective handle, folding, blade length 100 mm, Handle nickel-plated. Blade thickness/Size: 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100/100 mm. With protective handle, folding, blade length 100 mm, Handle nickel-plated. Blade thickness/Size: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100/100 mm.
Tools for Life, in precision and reliability! Sets standards. The complete Gedore-Range can be ordered at ratioparts® . Overview from our assortment, see
GEDORE Tools offer quality to the highest standards. Each piece is forged from carefully selected and rigorously analyzed steel. Experienced specialists guarantee careful curing and processing. The requirements of DIN and ISO standards are not exceeded.
VE = Packning unit; SB.-Pack. = Self-service package Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 27
25
WORKSHOP METAL DRILLS S. 25-28 bis 25-30
1
CONCRETE DRILLS S. 25-30
2
3
WOOD DRILLS S. 25-31
4
METAL DRILL - SET - DIN 338 # 1 2 3 4
Order.no Reference.no Packing QTY / Ø Info unit pack in mm 6801-0000 Set 25 VISIDEX HSS spiral drill set 118 °, rolled and steam-tempered. Quality drills for metal and steel. Individual drill table 6801-0 ... 6802-0000 Set 25 HSSG spiral drill set 135 °. Sharpened and polished. Industrial quality metal drill also suitable for aluminium, brass, etc. and other soft metals. See individual drill table 6802-0 ... 1-13 x HSS COBALT 5%, spiral drill set. High-performance steel. Cobalt alloy. Industrial quality. Extreme 6803-0000 Set 25 0,5 heat resistance. Suitable for hard machine metals. See individual drills table 6803-0 ... 6804-0000 Set 25 HSSG SPEEDMASTER spiral drills set. Titan nitride, precision ground. 8-times longer than conventional standard HSS drills. Highest cutting speed through special patented cutter and chip clearance. Ideal for series drilling in steel, cast sinter iron, gray cast iron, nonferrous metals. See individual drills table 6804-0 ...
INFO: O rder.no 6801-, 6802-, 6803-0000: Storage box = Metall, with euro hole flap. Order.no 6804-0000: Storage box = ABS (stable, high-quality plastic).
METAL DRILL - DIN 338 HSS Spiral drills 118° rolled and steam-tempered Order.no Reference.no Pack unit 6801-0100 Pck. 6801-0125 Pck. 6801-0150 Pck. 6801-0175 Pck. 6801-0200 Pck. 6801-0225 Pck. 6801-0250 Pck. 6801-0275 Pck. 6801-0300 Pck. 6801-0325 Pck. 6801-0350 Pck. 6801-0375 Pck. 6801-0400 Pck. 6801-0425 Pck. 6801-0450 Pck. 6801-0475 Pck. 6801-0500 Pck.
25
25 - 28
QTY / pack 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Ø in mm 1,0 1,25 1,5 1,75 2,0 2,25 2,5 2,75 3,0 3,25 3,5 3,75 4,0 4,25 4,5 4,75 5,0
Order.no Reference.no Pack unit 6801-0525 Pck. 6801-0550 Pck. 6801-0575 Pck. 6801-0600 Pck. 6801-0625 Pck. 6801-0650 Pck. 6801-0675 Pck. 6801-0700 Pck. 6801-0725 Pck. 6801-0750 Pck. 6801-0775 Pck. 6801-0800 Pck. 6801-0825 Pck. 6801-0850 Pck. 6801-0875 Pck. 6801-0900 Pck. 6801-0925 Pck.
QTY / pack 10 10 10 10 10 10 10 10 5 10 5 10 5 5 5 5 5
Ø in mm 5,25 5,5 5,75 6,0 6,25 6,5 6,75 7,0 7,25 7,5 7,75 8,0 8,25 8,5 8,75 9,0 9,25
Order.no Reference.no Pack unit 6801-0950 Pck. 6801-0975 Pck. 6801-1000 Pck. 6801-1025 Pck. 6801-1050 Pck. 6801-1100 Pck. 6801-1150 Pck. 6801-1200 Pck. 6801-1250 Pck. 6801-1300 Pck. 6801-1400 Pck. 6801-1500 Pck. 6801-1600 Pck. 6801-1700 Pck. 6801-1800 Pck. 6801-1900 Pck. 6801-2000 Pck.
QTY / pack 5 5 5 5 5 5 5 5 5 5 3 3 3 1 1 1 1
Ø in mm 9,5 9,75 10,0 10,25 10,5 11,0 11,5 12,0 12,5 13,0 14,0 15,0 16,0 17,0 18,0 19,0 20,0
VE = Packning unit; SB.-Pack. = Self-service package. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
METAL DRILL - DIN 338 SSG Spiral drills 135 °. Sharpened and polished. Order.no Reference.no Pack unit 6802-0100 Pck. 6802-0110 Pck. 6802-0120 Pck. 6802-0125 Pck. 6802-0130 Pck. 6802-0140 Pck. 6802-0150 Pck. 6802-0160 Pck. 6802-0170 Pck. 6802-0175 Pck. 6802-0180 Pck. 6802-0190 Pck. 6802-0200 Pck. 6802-0210 Pck. 6802-0220 Pck. 6802-0225 Pck. 6802-0230 Pck. 6802-0240 Pck. 6802-0250 Pck. 6802-0260 Pck. 6802-0270 Pck. 6802-0275 Pck. 6802-0280 Pck. 6802-0290 Pck. 6802-0300 Pck. 6802-0310 Pck. 6802-0320 Pck. 6802-0325 Pck. 6802-0330 Pck. 6802-0340 Pck. 6802-0350 Pck. 6802-0360 Pck. 6802-0370 Pck. 6802-0375 Pck. 6802-0380 Pck. 6802-0390 Pck. 6802-0400 Pck. 6802-0410 Pck. 6802-0420 Pck.
QTY / pack 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Ø in mm 1,00 1,10 1,20 1,25 1,30 1,40 1,50 1,60 1,70 1,75 1,80 1,90 2,00 2,10 2,20 2,25 2,30 2,40 2,50 2,60 2,70 2,75 2,80 2,90 3,00 3,10 3,20 3,25 3,30 3,40 3,50 3,60 3,70 3,75 3,80 3,90 4,00 4,10 4,20
Order.no Reference.no Pack unit 6802-0425 Pck. 6802-0430 Pck. 6802-0440 Pck. 6802-0450 Pck. 6802-0460 Pck. 6802-0470 Pck. 6802-0475 Pck. 6802-0480 Pck. 6802-0490 Pck. 6802-0500 Pck. 6802-0510 Pck. 6802-0520 Pck. 6802-0525 Pck. 6802-0530 Pck. 6802-0540 Pck. 6802-0550 Pck. 6802-0560 Pck. 6802-0570 Pck. 6802-0575 Pck. 6802-0580 Pck. 6802-0590 Pck. 6802-0600 Pck. 6802-0610 Pck. 6802-0620 Pck. 6802-0625 Pck. 6802-0630 Pck. 6802-0640 Pck. 6802-0650 Pck. 6802-0660 Pck. 6802-0670 Pck. 6802-0675 Pck. 6802-0680 Pck. 6802-0690 Pck. 6802-0700 Pck. 6802-0710 Pck. 6802-0720 Pck. 6802-0725 Pck. 6802-0730 Pck. 6802-0740 Pck.
QTY / pack 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5
Ø in mm 4,25 4,30 4,40 4,50 4,60 4,70 4,75 4,80 4,90 5,00 5,10 5,20 5,25 5,30 5,40 5,50 5,60 5,70 5,75 5,80 5,90 6,00 6,10 6,20 6,25 6,30 6,40 6,50 6,60 6,70 6,75 6,80 6,90 7,00 7,10 7,20 7,25 7,30 7,40
Order.no Reference.no Pack unit 6802-0750 Pck. 6802-0760 Pck. 6802-0770 Pck. 6802-0775 Pck. 6802-0780 Pck. 6802-0790 Pck. 6802-0800 Pck. 6802-0810 Pck. 6802-0820 Pck. 6802-0825 Pck. 6802-0830 Pck. 6802-0840 Pck. 6802-0850 Pck. 6802-0860 Pck. 6802-0870 Pck. 6802-0875 Pck. 6802-0880 Pck. 6802-0890 Pck. 6802-0900 Pck. 6802-0910 Pck. 6802-0920 Pck. 6802-0925 Pck. 6802-0930 Pck. 6802-0940 Pck. 6802-0950 Pck. 6802-0960 Pck. 6802-0970 Pck. 6802-0975 Pck. 6802-0980 Pck. 6802-0990 Pck. 6802-1000 Pck. 6802-1025 Pck. 6802-1050 Pck. 6802-1100 Pck. 6802-1150 Pck. 6802-1200 Pck. 6802-1250 Pck. 6802-1300 Pck.
QTY / pack 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
Ø in mm 7,50 7,60 7,70 7,75 7,80 7,90 8,00 8,10 8,20 8,25 8,30 8,40 8,50 8,60 8,70 8,75 8,80 8,90 9,00 9,10 9,20 9,25 9,30 9,40 9,50 9,60 9,70 9,75 9,80 9,90 10,00 10,25 10,50 11,00 11,50 12,00 12,50 13,00
QTY / pack 5 5 5 5 5 5 5 5
Ø in mm 8,0 8,5 9,0 9,5 10,0 11,0 12,0 13,0
INFO: Industrial quality metal drills. Also suitable for aluminum, brass, etc. and other soft metals. Packed in plastic box.
METAL DRILL - DIN 338 HSS Cobalt 5% Spiral drills Order.no Reference.no Pack unit 6803-0100 Pck. 6803-0150 Pck. 6803-0200 Pck. 6803-0250 Pck. 6803-0300 Pck. 6803-0325 Pck. 6803-0350 Pck. 6803-0400 Pck. 6803-0425 Pck.
QTY / pack 10 10 10 10 10 10 10 10 10
Ø in mm 1,0 1,5 2,0 2,5 3,0 3,25 3,5 4,0 4,25
Order.no Reference.no Pack unit 6803-0450 Pck. 6803-0500 Pck. 6803-0550 Pck. 6803-0600 Pck. 6803-0650 Pck. 6803-0675 Pck. 6803-0700 Pck. 6803-0750 Pck. 6803-0775 Pck.
QTY / pack 10 10 10 10 10 10 10 5 5
Ø in mm 4,5 5,0 5,5 6,0 6,5 6,75 7,0 7,5 7,75
Order.no Reference.no Pack unit 6803-0800 Pck. 6803-0850 Pck. 6803-0900 Pck. 6803-0950 Pck. 6803-1000 Pck. 6803-1100 Pck. 6803-1200 Pck. 6803-1300 Pck.
INFO: H igh-performance steel. Cobalt alloy. Industrial quality. Extreme heat resistance. Suitable for hard machine metals. Packed in plastic box. VE = Packning unit; SB.-Pack. = Self-service package. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 29
25
WORKSHOP
METAL DRILL - DIN 338 HSSG SPEEDMASTER Spiral drills Order.no Reference.no Pack unit 6804-0100 Pck. 6804-0150 Pck. 6804-0200 Pck. 6804-0250 Pck. 6804-0300 Pck. 6804-0325 Pck. 6804-0350 Pck. 6804-0400 Pck. 6804-0425 Pck. 6804-0450 Pck.
QTY / pack 10 10 10 10 10 10 10 10 10 10
Ø in mm 1,0 1,5 2,0 2,5 3,0 3,25 3,5 4,0 4,25 4,5
Order.no Reference.no Pack unit 6804-0500 Pck. 6804-0550 Pck. 6804-0600 Pck. 6804-0650 Pck. 6804-0675 Pck. 6804-0700 Pck. 6804-0750 Pck. 6804-0775 Pck. 6804-0800 Pck. 6804-0850 Pck.
QTY / pack 10 10 10 10 10 10 5 5 5 5
Ø in mm 5,0 5,5 6,0 6,5 6,75 7,0 7,5 7,75 8,0 8,5
Order.no Reference.no Pack unit 6804-0900 Pck. 6804-0950 Pck. 6804-1000 Pck. 6804-1050 Pck. 6804-1100 Pck. 6804-1200 Pck. 6804-1250 Pck. 6804-1300 Pck.
QTY / pack 5 5 5 5 5 5 5 5
Ø in mm 9,0 9,5 10,0 10,5 11,0 12,0 12,5 13,0
INFO: T itan nitride, precision ground. 8-times longer than conventional standard HSS drills. Highest cutting speed through special patented cutter and chip clearance. Ideal for series drilling in steel, cast sinter iron, gray cast iron, nonferrous metals. Packed in plastic box..
1
2
CONCRETE DRILL SET # 1 2
Order.no Reference.no Packing QTY / Ø Info unit pack in mm 6805-0000 Set 8 3-4-5-6-8-9-10-12 IN 8039 HIGH PERFORMER concrete hammer drill set. Large U-shaped coil for optimal drilling dust transport. Melting point at 1120 °C drill temperature. Carbide cutting tip. Storage box = ABS (stable, high-quality plastic), with Euro hole flap. 6806-0000 Set 7 5-6-8 x 110, SDS-Plus Hammer Drill Set. Suitable for expansion dowel holes for dowels of all kinds, 6-8-10-12 x 160 such as plastic, metal dowels and adhesive. = Metal Storage box, with Euro hole flap.
CONCRETE DRILL DIN 8039 High Performer Concrete hammer drills 130° Order.no 6805-0300 6805-0400 6805-0500 6805-0600 6805-0800 6805-0900 6805-1000 6805-1200
Reference.no
Ø in mm 3,0 4,0 5,0 6,0 8,0 9,0 10,0 12,0
INFO: L arge U-shaped coil for optimal drilling dust transport. Melting point at 1120 °C drill temperature. Carbide cutting tip.
25
25 - 30
CONCRETE DRILL SDS-PLUS hammer drills Order.no 6806-05110 6806-06110 6806-08110 6806-06160 6806-08160 6806-10160 6806-12160 6806-08260 6806-10310 6806-12310
Reference.no
CONCRETE DRILL - SDS-MAX Reversing hammer drills Ø in mm 5,0 6,0 8,0 6,0 8,0 10,0 12,0 8,0 10,0 12,0
Length in mm 110 110 110 160 160 160 160 260 310 310
INFO: S uitable for expansion dowel holes for dowels of all kinds, such as plastic, metal dowels and adhesive. Packaged with Euro hole flap.
Order.no 6807-12540 6807-14540 6807-16540 6807-18540 6807-20520 6807-22520 6807-25520 6807-30570
Reference.no
Ø in mm 12,0 14,0 16,0 18,0 20,0 22,0 25,0 30,0
Length in mm 540 540 540 540 520 520 520 570
INFO: S uitable for wall openings, for pipes of all kinds and electrical wiring. Packaged with Euro hole flap.
VE = Packning unit; SB.-Pack. = Self-service package. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
WOOD DRILL - SET # 1 2
Order.no Reference.no Packing QTY / Ø Info unit pack in mm 6808-0000 Set 8 3-4-5-6-7-8-9-10 DIN 7487 Wood drill set, tool steel. Storage box = ABS (stable, high-quality plastic). 6812-0000 Set 5 15-20-25-30-35 Forstnerbohrersatz, Tool steel. Drills for hard wood, laminated wood, chipboard and blockboard. = Wood Storage box.
WOOD DRILL - DIN 7487 - Spiral drills, tool steel # 1
1 1 1 1 1 1 1 1
Order.no Reference.no Packing unit 6808-0300 Pck. 6808-0400 Pck. 6808-0500 Pck. 6808-0600 Pck. 6808-0700 Pck. 6808-0800 Pck. 6808-0900 Pck. 6808-1000 Pck.
QTY / pack 10 10 10 10 10 10 10 10
Ø in mm 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0
Info
Packed in plastic box
SCREW TAPS-SET - CV-STEEL - metric # 1 1 1 1 1 1 1 1 1 1
1
Order.no Reference.no Packing unit 6809-03050 Set 6809-04070 Set 6809-05080 Set 6809-06100 Set 6809-07100 Set 6809-08125 Set 6809-09125 Set 6809-1015 Set 6809-1115 Set 6809-12175 Set
QTY / pack 3 3 3 3 3 3 3 3 3 3
Thread size M3 M4 M5 M6 M7 M8 M9 M10 M11 M12
Thread pitch 0,50 0,70 0,80 1,00 1,00 1,25 1,25 1,50 1,50 1,75
Info
omposed of pre-middle-and C finishing cutter. Packed in plastic boxes.
SCREW TAPS-SET - CV-STEEL - UNC - inch sizes 2
# 2 2 2 2 2
Order.no Reference.no Packing unit 6810-0140 Set 6810-0516 Set 6810-0380 Set 6810-0716 Set 6810-0120 Set
QTY / pack 3 3 3 3 3
Thread size 1/4 5/16 3/8 7/16 1/2
Info
Composed of pre-middle-and finishing cutter. Packed in plastic boxes.
SCREW TAPS-SET - CV-STEEL - UNF - inch sizes 3
# 3 3 3 3 3
Order.no Reference.no Packing unit 6811-0140 Set 6811-0516 Set 6811-0380 Set 6811-0716 Set 6811-0120 Set
QTY / pack 2 2 2 2 2
Thread size 1/4 5/16 3/8 7/16 1/2
VE = Packning unit; SB.-Pack. = Self-service package. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Info
Composed of pre- and finishing cutter. Packed in plastic boxes.
25 - 31
25
WORKSHOP SCREW TAPS - Crankshaft thread 3/8“-24 # 1
1
Order.no 99-039
Reference.no
Thread size UNF 3/8‘‘- 24G, rechts
Price advantage to use!
With thread to the head and galvanized.
Info For example, crankshaft thread.
INFO: V E 1= 1 Pack á 50 pc.; VE 2 = 4 Pack á 50 pc.; Price per each pack.
DIN 84 - 4.8 / DIN EN ISO 1207 - Slotted cheese head screw Order.no VE 1 QTY / pack 6084-0310 50 6084-0316 50 6084-0320 50 6084-0330 50 6084-0410 50 6084-0416 50 6084-0420 50 6084-0425 50 6084-0430 50 6084-0440 50 6084-0450 50 6084-0510 50 6084-0516 50 6084-0520 50 6084-0525 50 6084-0530 50 6084-0535 50 6084-0540 50 6084-0550 50 6084-0560 50 6084-0610 50 6084-0616 50 6084-0620 50 6084-0625 50 6084-0630 50 6084-0635 50 6084-0640 50 6084-0645 50 6084-0650 50 6084-0655 50 6084-0660 50 6084-0816 50
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference.no 2 Size M3x10 M3x16 M3x20 M3x30 M4x10 M4x16 M4x20 M4x25 M4x30 M4x40 M4x50 M5x10 M5x16 M5x20 M5x25 M5x30 M5x35 M5x40 M5x50 M5x60 M6x10 M6x16 M6x20 M6x25 M6x30 M6x35 M6x40 M6x45 M6x50 M6x55 M6x60 M8x16
Order.no VE 1 QTY / pack 6084-0820 50 6084-0825 50 6084-0830 50 6084-0835 50 6084-0840 50 6084-0845 50 6084-0850 50 6084-0855 50 6084-0860 50 6084-0870 50 6084-0880 50 6084-0890 50 6084-08100 50 6084-1016 50 6084-1020 50 6084-1025 50 6084-1030 50 6084-1035 50 6084-1040 50 6084-1045 50 6084-1050 50 6084-1055 50 6084-1060 50 6084-1070 50 6084-1080 50 6084-1090 50 6084-10100 50 6084-1220 50 6084-1230 50 6084-1240 50 6084-1250 50
DIN 912 - 8.8 / DIN EN ISO 4762 Cylindrical head, hexagon drive socket cap screws, zinc galvanized.
DIN 912 - 8.8 - Cylindrical head, hexagon drive socket cap screws Order.no VE 1 QTY / pack 6912-0310 100 6912-0316 100 6912-0320 100 6912-0330 100 6912-0410 100 6912-0416 100 6912-0420 50
25
25 - 32
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 200
Reference.no 2 Size M3x10 M3x16 M3x20 M3x30 M4x10 M4x16 M4x20
Order.no VE 1 QTY / pack 6912-0425 100 6912-0430 50 6912-0440 50 6912-0510 100 6912-0516 100 6912-0520 100 6912-0525 100
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference.no 2 Size M8x20 M8x25 M8x30 M8x35 M8x40 M8x45 M8x50 M8x55 M8x60 M8x70 M8x80 M8x90 M8x100 M10x16 M10x20 M10x25 M10x30 M10x35 M10x40 M10x45 M10x50 M10x55 M10x60 M10x70 M10x80 M10x90 M10x100 M12x20 M12x30 M12x40 M12x50
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack. Reference.no 1 VE 2 QTY / pack 500 200 200 500 500 500 500
Reference.no 2 Size M4x25 M4x30 M4x40 M5x10 M5x16 M5x20 M5x25
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP Price advantage to use!
• Zinc galvanized
DIN 912 - 8.8 - Cylindrical head, hexagon drive socket cap screws Order.no VE 1 QTY / pack 6912-0530 100 6912-0535 100 6912-0540 100 6912-0550 100 6912-0560 100 6912-0610 100 6912-0616 100 6912-0620 100 6912-0625 100 6912-0630 100 6912-0635 100 6912-0640 100 6912-0645 100 6912-0650 100 6912-0655 100 6912-0660 100 6912-0810 100 6912-0816 100 6912-0820 100 6912-0825 100 6912-0830 100 6912-0835 100 6912-0840 100 6912-0845 100 6912-0850 100 6912-0855 100 6912-0860 100 6912-0870 100 6912-0880 100 6912-0890 50
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 200
Reference.no 2 Size M5x30 M5x35 M5x40 M5x50 M5x60 M6x10 M6x16 M6x20 M6x25 M6x30 M6x35 M6x40 M6x45 M6x50 M6x55 M6x60 M8x10 M8x16 M8x20 M8x25 M8x30 M8x35 M8x40 M8x45 M8x50 M8x55 M8x60 M8x70 M8x80 M8x90
• Zinc galvanized
Order.no VE 1 QTY / pack 6912-08100 50 6912-1012 100 6912-1016 100 6912-1020 100 6912-1025 100 6912-1030 100 6912-1035 50 6912-1040 100 6912-1045 50 6912-1050 100 6912-1055 50 6912-1060 50 6912-1070 50 6912-1080 50 6912-1090 50 6912-10100 50 6912-10110 50 6912-10120 50 6912-1220 50 6912-1230 50 6912-1240 50 6912-1250 50 6912-1260 50 6912-1270 50 6912-1280 50 6912-1290 50 6912-12100 50 6912-12110 50 6912-12120 50
Reference.no 1 VE 2 QTY / pack 200 500 500 500 500 500 200 500 200 500 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Price advantage to use!
DIN 931 - 8.8 HEX HEAD CAP SCREW - Partially Threaded Order.no VE 1 QTY / pack 6931-0635 50 6931-0640 50 6931-0645 50 6931-0650 50 6931-0655 50 6931-0660 50 6931-0835 50 6931-0840 50 6931-0845 50 6931-0850 50 6931-0855 50 6931-0860 50 6931-0865 50 6931-1040 50 6931-1045 50 6931-1050 50
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference.no 2 Size M6x35 M6x40 M6x45 M6x50 M6x55 M6x60 M8x35 M8x40 M8x45 M8x50 M8x55 M8x60 M8x65 M10x40 M10x45 M10x50
Order.no VE 1 QTY / pack 6931-1055 50 6931-1060 50 6931-1070 50 6931-1080 50 6931-1090 50 6931-10100 50 6931-1250 50 6931-1260 50 6931-1270 50 6931-1280 50 6931-1290 50 6931-12100 50 6931-12110 50 6931-12120 50
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
M8x100 M10x12 M10x16 M10x20 M10x25 M10x30 M10x35 M10x40 M10x45 M10x50 M10x55 M10x60 M10x70 M10x80 M10x90 M10x100 M10x110 M10x120 M12x20 M12x30 M12x40 M12x50 M12x60 M12x70 M12x80 M12x90 M12x100 M12x110 M12x120
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Reference.no 2 Size
Reference.no 2 Size M10x55 M10x60 M10x70 M10x80 M10x90 M10x100 M12x50 M12x60 M12x70 M12x80 M12x90 M12x100 M12x110 M12x120
25 - 33
25
WORKSHOP Price advantage to use!
• With thread up to head • Zinc galvanized
DIN 933 - 8.8 HEX HEAD CAP SCREW - Fully Threaded Order.no VE 1 QTY / pack 6933-0310 100 6933-0316 100 6933-0320 100 6933-0330 100 6933-0410 100 6933-0416 100 6933-0420 100 6933-0425 100 6933-0430 100 6933-0440 100 6933-0510 100 6933-0516 100 6933-0520 100 6933-0525 100 6933-0530 100 6933-0535 100 6933-0540 100 6933-0550 100 6933-0560 100 6933-0610 100 6933-0616 100 6933-0620 100 6933-0625 100 6933-0630 100 6933-0635 100 6933-0640 100 6933-0645 100 6933-0650 100 6933-0655 100 6933-0660 100 6933-0810 100 6933-0812 100 6933-0816 100 6933-0820 100 6933-0825 100 6933-0830 100 6933-0835 100 6933-0840 100
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
Reference.no 2 Size M3x10 M3x16 M3x20 M3x30 M4x10 M4x16 M4x20 M4x25 M4x30 M4x40 M5x10 M5x16 M5x20 M5x25 M5x30 M5x35 M5x40 M5x50 M5x60 M6x10 M6x16 M6x20 M6x25 M6x30 M6x35 M6x40 M6x45 M6x50 M6x55 M6x60 M8x10 M8x12 M8x16 M8x20 M8x25 M8x30 M8x35 M8x40
Order.no VE 1 QTY / pack 6933-0845 100 6933-0850 100 6933-0855 100 6933-0860 100 6933-0865 100 6933-0870 100 6933-0880 100 6933-0890 100 6933-08100 100 6933-1010 100 6933-1016 100 6933-1020 100 6933-1025 100 6933-1030 100 6933-1035 100 6933-1040 100 6933-1045 100 6933-1050 100 6933-1055 100 6933-1060 100 6933-1070 100 6933-1080 100 6933-1090 100 6933-10100 100 6933-10110 50 6933-10120 50 6933-1220 100 6933-1230 100 6933-1240 100 6933-1250 100 6933-1260 100 6933-1270 50 6933-1280 50 6933-1290 50 6933-12100 50 6933-12110 50 6933-12120 50
INFO: VE 1 = 1 Pack; VE 2 = 4 Pack VE 1; Price per each pack.
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 200 200 500 500 500 500 500 200 200 200 200 200 200
Reference.no 2 Size M8x45 M8x50 M8x55 M8x60 M8x65 M8x70 M8x80 M8x90 M8x100 M10x10 M10x16 M10x20 M10x25 M10x30 M10x35 M10x40 M10x45 M10x50 M10x55 M10x60 M10x70 M10x80 M10x90 M10x100 M10x110 M10x120 M12x20 M12x30 M12x40 M12x50 M12x60 M12x70 M12x80 M12x90 M12x100 M12x110 M12x120 VE = Packning unit.
Nipples, Sockets and Screws ...
lles Wir haben a ekte für die perf Reparatur!
25
25 - 34
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP Price advantage to use! DIN 963 - 4.8 - SLOTTED ZINC FLAT HEAD MACHINE SCREW Order.no VE 1 QTY / pack 6963-0310 100 6963-0316 100 6963-0320 100 6963-0330 100 6963-0410 100 6963-0416 100 6963-0420 100 6963-0425 100 6963-0430 100 6963-0440 100 6963-0450 100 6963-0510 100 6963-0516 100 6963-0520 100 6963-0525 100 6963-0530 100 6963-0535 100 6963-0540 100 6963-0550 100 6963-0560 100 6963-0610 100 6963-0616 100 6963-0620 100 6963-0625 100 6963-0630 100 6963-0635 100 6963-0640 100 6963-0645 100 6963-0650 100 6963-0655 100 6963-0660 100 6963-0810 100 6963-0816 100 6963-0820 100 6963-0825 100
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
Reference.no 2 Size M3x10 M3x16 M3x20 M3x30 M4x10 M4x16 M4x20 M4x25 M4x30 M4x40 M4x50 M5x10 M5x16 M5x20 M5x25 M5x30 M5x35 M5x40 M5x50 M5x60 M6x10 M6x16 M6x20 M6x25 M6x30 M6x35 M6x40 M6x45 M6x50 M6x55 M6x60 M8x10 M8x16 M8x20 M8x25
• With thread up to head • Zinc galvanized • The length of flat head screws, is determined including the head.
Order.no VE 1 QTY / pack 6963-0830 100 6963-0835 100 6963-0840 100 6963-0845 100 6963-0850 100 6963-0855 100 6963-0860 100 6963-0870 100 6963-0880 100 6963-0890 100 6963-08100 100 6963-1016 100 6963-1020 100 6963-1025 100 6963-1030 100 6963-1035 100 6963-1040 100 6963-1045 100 6963-1050 100 6963-1055 100 6963-1060 100 6963-1070 100 6963-1080 100 6963-1090 100 6963-10100 100 6963-1220 100 6963-1230 100 6963-1240 100 6963-1250 100 6963-1260 100 6963-1270 100 6963-1280 100 6963-1290 100 6963-12100 50
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 200
Price advantage to use! DIN 603 - 8.8 - MUSHROOM HEAD SQUARE NECK BOLTS Order.no VE 1 QTY / pack 6603-0616 100 6603-0620 100 6603-0630 100 6603-0640 100 6603-0645 100 6603-0650 100 6603-0660 100 6603-0670 100 6603-0820 100 6603-0830 100 6603-0840 100
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500
Reference.no 2 Size M6x16 M6x20 M6x30 M6x40 M6x45 M6x50 M6x60 M6x70 M8x20 M8x30 M8x40
Order.no VE 1 QTY / pack 6603-0850 100 6603-0870 100 6603-0880 100 6603-08100 100 6603-1020 100 6603-1030 100 6603-1040 100 6603-1050 100 6603-1080 100 6603-10100 100
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
M8x30 M8x35 M8x40 M8x45 M8x50 M8x55 M8x60 M8x70 M8x80 M8x90 M8x100 M10x16 M10x20 M10x25 M10x30 M10x35 M10x40 M10x45 M10x50 M10x55 M10x60 M10x70 M10x80 M10x90 M10x100 M12x20 M12x30 M12x40 M12x50 M12x60 M12x70 M12x80 M12x90 M12x100
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Reference.no 2 Size
Reference.no 2 Size M8x50 M8x70 M8x80 M8x100 M10x20 M10x30 M10x40 M10x50 M10x80 M10x100
25 - 35
25
WORKSHOP
DIN 571 - HEXAGON HEAD WOOD SCREW Order.no VE 1 QTY / pack 6571-0630 50 6571-0635 50 6571-0640 50 6571-0645 50 6571-0650 50 6571-0655 50 6571-0660 50 6571-0830 50 6571-0840 50 6571-0850 50
Reference.no 1 VE 2 QTY / pack 250 250 250 250 250 250 250 250 250 250
Reference.no 2 Size 6x30 6x35 6x40 6x45 6x50 6x55 6x60 8x30 8x40 8x50
Price advantage to use!
Order.no VE 1 QTY / pack 6571-0860 50 6571-0870 50 6571-0880 50 6571-10100 50 6571-1050 50 6571-1060 50 6571-1070 50 6571-1080 50 6571-1090 50
Reference.no 1 VE 2 QTY / pack 250 250 250 250 250 250 250 250 250
Price advantage to use!
DIN 7976 - HEX HEAD TAPPING SCREW
Price advantage to use!
DIN 7981 - PAN HEAD TAPPING SCREW
Price advantage to use!
DIN 7982 - FLAT HEAD SELF TAPPING SCREW
INFO: VE 1 = 1 Pack; VE 2 = 4 Pack VE 1; Price per each pack.
25
• With thread up to head • Zinc galvanized
25 - 36
Order.no VE 1 Reference.no 1 QTY / pack 67976-4895 100 67976-4813 100 67976-4816 100 67976-4819 100 67976-5513 100 67976-5516 100 67976-5519 100
Order.no VE 1 Reference.no 1 QTY / pack 67981-2995 50 67981-2913 50 67981-2916 50 67981-2919 50 67981-3595 50 67981-3513 50 67981-3516 50 67981-3519 50 67981-3995 50 67981-3913 50 67981-3916 50 67981-3919 50 67981-4295 50 67981-4213 50 67981-4216 50 67981-4219 50
Order.no VE 1 Reference.no 1 QTY / pack 67982-2995 50 67982-2913 50 67982-2916 50 67982-2919 50 67982-3595 50 67982-3513 50 67982-3516 50 67982-3519 50
INFO: VE 1 = 1 Pack; VE 2 = 4 Pack VE 1; Price per each pack.
VE 2 Reference.no 2 QTY / pack 500 500 500 500 500 500 500
VE 2 Reference.no 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
VE 2 Reference.no 2 QTY / pack 200 200 200 200 200 200 200 200
Reference.no 2 Size 8x60 8x70 8x80 10x100 10x50 10x60 10x70 10x80 10x90
Size in mm C4,8x9,5 C4,8x13 C4,8x16 C4,8x19 C5,5x13 C5,5x16 C5,5x19
Size in mm C2,9x9,5 C2,9x13 C2,9x16 C2,9x19 C3,5x9,5 C3,5x13 C3,5x16 C3,5x19 C3,9x9,5 C3,9X13 C3,9x16 C3,9x19 C4,2x9,5 C4,2x13 C4,2x16 C4,2x19
Size in mm C2,9x9,5 C2,9x13 C2,9x16 C2,9x19 C3,5x9,5 C3,5x13 C3,5x16 C3,5x19
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP DIN 7982 - - FLAT HEAD SELF TAPPING SCREW
INFO: VE 1 = 1 Pack; VE 2 = 4 Pack VE 1; Price per each pack.
Price advantage to use!
INFO: V E 1= 1 Pack รก 50 pc.; VE 2 = 4 Pack รก 50 pc.; Price per each pack.
Price advantage to use!
INFO: V E 1= 1 Pack รก 50 pc.; VE 2 = 4 Pack รก 50 pc.; Price per each pack.
Order.no VE 1 Reference.no 1 QTY / pack 67982-3995 50 67982-3913 50 67982-3916 50 67982-3919 50
VE 2 Reference.no 2 QTY / pack 200 200 200 200
Price advantage to use!
Size in mm C3,9x9,5 C3,9x13 C3,9x16 C3,9x19
DIN 7983 - CROSS RECESSED PAN HEAD TAPPING SCREW Order.no VE 1 QTY / pack 67983-2913 50 67983-2916 50 67983-2919 50 67983-3595 50 67983-3513 50 67983-3516 50 67983-3519 50 67983-3995 50 67983-3913 50 67983-3916 50 67983-3919 50 67983-4213 50 67983-4216 50 67983-4219 50
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference.no 2 Size in mm C2,9x13 C2,9x16 C2,9x19 C3,5x9,5 C3,5x13 C3,5x16 C3,5x19 C3,9x9,5 C3,9x13 C3,9x16 C3,9x19 C4,2x13 C4,2x16 C4,2x19
DIN 88094 - Screw, Flat Head, Pozidriv-Cross-Head, Zinc Galvanized, Hardened Steel (similar to tapping screws). Order.no VE 1 QTY / pack 688094-0312 50 688094-0316 50 688094-0320 50 688094-0325 50 688094-0330 50 688094-03516 50 688094-03520 50 688094-03525 50 688094-03530 50 688094-0416 50 688094-0420 50 688094-0425 50 688094-0430 50 688094-0435 50 688094-0440 50 688094-0450 50 688094-0530 50 688094-0535 50 688094-0540 50 688094-0545 50 688094-0550 50 688094-0640 50 688094-0650 50 688094-0660 50
Reference.no 1 VE 2 QTY / pack 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Reference.no 2 Size in mm 3x12 3x16 3x20 3x25 3x30 3,5x16 3,5x20 3,5x25 3,5x30 4x16 4x20 4x25 4x30 4x35 4x40 4x50 5x30 5x35 5x40 5x45 5x50 6x40 6x50 6x60
25 - 37
25
WORKSHOP DIN 975 - Threaded bars, zinc galvanized Pic. 1 1 1 1 1 1
Price advantage to use!
Price advantage to use!
Price advantage to use!
Order.no
Reference.no
6975-041000 6975-051000 6975-061000 6975-081000 6975-101000 6975-121000
Packing unit
Pck.
QTY / pack 1 1 1 1 1 1
Thread Size in mm M4 M5 M6 M8 M10 M12
Length in mm 1000 1000 1000 1000 1000 1000
DIN 125-1 - WASHERS Order.no VE 1 Reference.no 1 QTY / pack 6125-0032 100 6125-0043 100 6125-0053 100 6125-0064 100 6125-0084 100 6125-0105 100 6125-0130 100
VE 2 Reference.no 2 QTY / pack 500 500 500 500 500 500 500
Size in mm A3,2x7x0,5 A4,3x9x0,8 A5,3x10x1 A6,4x12x1,6 A8,4x16x1,6 A10,5x20x2 A13x24x2,5
VE 2 Reference.no 2 QTY / pack 500 500 500 500 500 500 500
Size in mm A3 A4 A5 A6 A8 A10 A12
VE 2 Reference.no 2 QTY / pack 500 500 500 500 500 500 500
Size in mm A3,2 A4,3 A5,3 A6,4 A8,4 A10,5 A13
DIN 127 - SPRING WASHERS Order.no VE 1 Reference.no 1 QTY / pack 6127-0003 100 6127-0004 100 6127-0005 100 6127-0006 100 6127-0008 100 6127-0010 100 6127-0012 100
DIN 6798 - LOCK WASHERS Order.no VE 1 Reference.no 1 QTY / pack 6798-0032 100 6798-0043 100 6798-0053 100 6798-0064 100 6798-0084 100 6798-0105 100 6798-0130 100
INFO: V E 1 = 1 Pack รก 100 St.; VE 2 = 5 Pack รก 100 St.; Price per each pack.
Price advantage to use!
DIN 9021 - REPAIR WASHERS Order.no VE 1 QTY / pack 69021-0032 250 69021-0043 250 69021-0053 250 69021-0064 250 69021-0084 250 69021-0105 250 69021-0130 250
Reference.no 1 VE 2 Reference.no 2 QTY / pack 500 500 500 500 500 500 500
Size in mm 3,2x9x0,8 4,3x12x1 5,3x15x1,2 6,4x18x1,6 8,4x24x2 10,5x30x2,5 13x37x3
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
25
25 - 38
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP Price advantage to use!
DIN 315 - WING NUT
Price advantage to use!
DIN 934 - HEXAGON NUT
Price advantage to use!
DIN 985 - HEXAGON SELF-LOCKING NUT
Price advantage to use!
DIN 986 - HEXAGON DOMED CAP NUTS
Price advantage to use!
DIN 88402 - BLIND RIVETS
Order.no 6315-0300 6315-0400 6315-0500 6315-0600 6315-0800 6315-1000 6315-1200
Order.no 6934-0003 6934-0004 6934-0005 6934-0006 6934-0008 6934-0010 6934-0012 6934-0018
Order.no 6985-0003 6985-0004 6985-0005 6985-0006 6985-0008 6985-0010 6985-0012
Order.no 6986-0600 6986-0800 6986-1000 6986-1200
VE 1 - QTY / pack 50 25 50 50 50 50 25
VE 1 - QTY / pack 100 100 100 100 100 100 100 100
VE 1 - QTY / pack 100 100 100 100 100 100 100
Reference.no 1 VE 2 - QTY / pack 200 100 200 200 200 200 100
Reference.no 2 Size M3 M4 M5 M6 M8 M10 M12
Reference.no 1 VE 2 - QTY / pack 500 500 500 500 500 500 500 500
Reference.no 2 Size M3 M4 M5 M6 M8 M10 M12 M18
Reference.no 1 VE 2 - QTY / pack 500 500 500 500 500 500 500
VE 1 - QTY / pack 100 100 100 50
Order.no VE 1 QTY / pack 688402-0306 250 688402-0308 250 688402-0310 250 688402-0406 250 688402-0408 250 688402-0410 250 688402-0420 250 688402-0414 250 688402-0425 250 688402-0510 250 688402-0516 250 688402-0520 250
Reference.no 1 VE 2 - QTY / pack 500 500 500 200
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500 500 500 500
Reference.no 2 Size M3 M4 M5 M6 M8 M10 M12
Reference.no 2 Size M6 M8 M10 M12
Reference.no 2 Size in mm 3x6 3x8 3x10 4x6 4x8 4x10 4x20 4x14 4x25 5x10 5x16 5x20
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack. VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 39
25
WORKSHOP Price advantage to use!
DIN 94 - COTTER PINS Order.no VE 1 QTY / pack 6094-1020 250 6094-1225 250 6094-1632 250 6094-2036 250 6094-2540 250 6094-3240 250 6094-4045 250 6094-5050 250 6094-6363 250
INFO: VE 1 = 1 Pack; VE 2 = X-Pack VE 1; Price per each pack.
Price advantage to use!
Price advantage to use!
Refill Packs can be ordered at www.ratioparts.com
1
Reference.no 1 VE 2 QTY / pack 500 500 500 500 500 500 500 500 500
Reference.no 2 Size in mm 1x20 1,2x25 1,6x32 2x36 2,5x40 3,2x40 4x45 5x50 6,3x63
DIN 11023 - SAFETY PIN Order.no VE 1 QTY / pack 611023-4542 50 611023-6042 50 611023-8042 50 611023-1042 50
Reference.no 1 VE 2 QTY / pack 200 200 200 200
Reference.no 2 Size in mm 4,5x42x34 6x42x41 8x42x41 10x42x41
DIN 11024 - SPRING COTTER PIN Order.no VE 1 Reference.no 1 QTY / pack 6999-0556 100 611024-2500 100 611024-3200 100 611024-4000 50 611024-5000 50 611024-6300 50 611024-7000 25 611024-8000 25
VE 2 QTY / pack 500 500 500 200 200 200 100 100
Kennziffer 2
Hole-Ø, in mm 1,5 2,5 3,2 4 5 6,3 7 8
Shaft-Ø, in mm 4-8 9 - 11,2 11,3 - 14 14,1 - 20 20,1 - 26 26,1 - 34 34,1 - 45 45,1 - 56
DIN 471 - Assortment of securing rings (outside) for shafts. Made of spring steel, blackened and oiled. Pic. 1
Order.no 682471-0830
Reference.no
Description DIN 471 securing rings. Assortment made of spring steel, blackened and oiled.
Content 12 popular sizes of securing rings. Suitable shafts varied from Ø 8 - 30mm. Total: 925 pc.
ROTOR PIN 1
Pic.
Order.no
1 1 1 1
351-006 351-007 350-012 351-008
Reference.no
Packing QTY / unit pack 5 5 Pack 5 5
Hole-Ø in mm 4,5 6,0 8,0 10,0
Shaft-Ø in mm 36 40 45 55
Pin length in mm 40 45 50 60
Reference.no
Packing QTY / unit pack 5 5 Pack 5 5 5
Hole-Ø in mm 4,5 7,0 9,0 10,0 11,0
Shaft-Ø in mm 41 41 41 41 41
Pin length in mm 47 47 47 47 47
LINCH PIN
2
25
25 - 40
Pic.
Order.no
2 2 2 2 2
351-001 351-002 351-003 351-004 351-005
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP SPRING PIN 1
#
Order.no
1 1 1 1 1 1
351-010 351-013 351-015 351-016 351-017 351-019
Reference.no
Packing unit Pck. Pck. Pck. Pck. Pck. Pck.
QTY / pack 10 10 10 10 10 10
Hole-Ø in mm 2,0 3,0 4,0 5,0 6,0 8,0
Shaft-Ø in mm 9-14 10-16 16-20 20-28 28-40 30-45
Reference.no
Packing unit Pck. Pck. Pck. Pck. Pck. Pck.
QTY / pack 10 10 10 10 10 10
For bolts-Ø in mm 5 6,5-8 8-9,5 10-13 16-20 22-25
Ø in mm 1,5 1,8 2,3 3,0 3,8 4,5
SPRING PIN 1
1
#
Order.no
1 1 1 1 1 1
415-471 415-472 415-473 415-474 415-475 415-476
DIN 471 REFILL PACKAGES - For assortment boxes of securing rings (outside) for shafts.Made of spring steel, blackened and oiled. #
Order.no
1 1 1 1 1 1 1 1 1 1 1 1
6471-0808 6471-1010 6471-1210 6471-1410 6471-1510 6471-1610 6471-1812 6471-2012 6471-2212 6471-2412 6471-2512 6471-3015
Reference.no
Packing unit Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck.
QTY / pack 25 25 25 25 25 25 25 25 25 25 25 25
Shaft-Ø in mm 8 10 12 14 15 16 18 20 22 24 25 30
DIN 471 / DIN 472 - Assortment of securing rings (outside/inside) for holes and shafts. Made of spring steel, blackened and oiled.
1
# 1
Order.no 682472-0830
Reference.no
Description DIN 471/ DIN472 Securing rings. Assortment made of spring steel, blackened and oiled.
Content 119 popular sizes of securing rings. Suitable holes and shafts varied from Ø 8 40mm. Total: 570 pc.
DIN 472 REFILL PACKAGES - For assortment boxes of securing rings (inside) for holes. Made of spring steel, blackened and oiled.
1
#
Order.no
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
6472-0808 6472-1010 6472-1210 6472-1410 6472-1510 6472-1610 6472-1710 6472-1810 6472-2010 6472-2110 6472-2210 6472-2412 6472-2612 6472-2812 6472-3012
Reference.no
Packing unit Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck.
QTY / pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
VE = Packning unit. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Hole-Ø in mm 8 10 12 14 15 16 17 18 20 21 22 24 26 28 30 25 - 41
25
WORKSHOP HELICOIL ® PLUS “REFILL PACKES“-Typ free running Werkstoff Edelstahl A 2 1
#
Order.no
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
18-906 18-930 18-909 18-931 18-912 18-942 18-915 18-944 18-918 18-908 18-911 18-916 18-954 18-955 18-509 18-464 18-666 18-708 18-635 18-922 18-961 18-615 18-616 18-932 18-917 18-966 18-910 18-969 18-913
Reference.no
Packing unit Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck.
QTY / pack 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 20 20 20 10 10 10 10 20 10 10
Thread Size M5 x 0,8 M5 x 0,8 M6 x 1,0 M6 x 1,0 M8 x 1,25 M8 x 1,0 M10 x 1,5 M10 x 1,5 M12 x 1,75 M14 x 1,25 M14 x 1,25 M14 x 1,25 M14 x 1,5 M14 x 1,5 M14 x 2,0 UNC 1/4 - 20 UNC 5/16 -18 UNF 3/8 - 24 UNF 1/2 - 20 M4 x 0,7 M4 x 0,7 M6 x 1,0 M8 x 1,25 M8 x 1,25 M10 x 1,25 M10 x 1,0 M4 x 0,7 M12 x 1,75 M8 x 1,25
Thread Length in mm 7,5 10 9 12 12 12 15 20 18 8,4 12,4 16,4 14 21 28 9,5 11,9 19,1 19,1 6 8 6 16 24 10 10 4 24 8
INFO: Contains sizes equivalent for each thread inserts. Other thread and pack sizes in metric and inch dimensions are available on request.
1
2
HELICOIL ® PLUS - REPAIR KITS - with metric thread #
Order.no
1 1 1 1 2
18-962 18-919 18-622 18-621 18-958
Reference.no
Number of sets 20 pc 20 pc 10 pc 10 pc 10 pc
Thread size M4 M5 M10 x 1 M10 x 1,25 M14 x 1,5
Thread Length in mm 4, 6, 8 5; 7,5; 10 10, 15, 20 10, 15, 20 14, 21, 28
Info
Contains drills, HSS hand tap, mounting screw and pin breaking. Includes hand tap HSS and fixtured.
INFO: H ELICOIL Refill packages can be seen at accessories at www.ratioparts.com and available on request.
25
25 - 42
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
198-tlg.
230-tlg.
1
2
HELICOIL ® PLUS - REPAIR KITS - with metric thread #
Order.no
1
18-620
2
18-610
Reference.no
Number of sets 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20
Thread size
Thread Length in mm 8,4 12,4 16,4 12 18 24 10 15 20 8 12 16 6 9 12 12 18 24 10 15 20 8 12 16 6 9 12 5 7,5 10
M14 x 1,25 M14 x 1,25 M14 x 1,25 M12 M12 M12 M10 M10 M10 M8 M8 M8 M6 M6 M6 M12 M12 M12 M10 M10 M10 M8 M8 M8 M6 M6 M6 M5 M5 M5
Info
Spiralbohrer bis M12 (bei M14 x 1,25 mit kombiniertem Bohr- und Schneidwerkzeug) Handgewindebohrer aus HSS, Einbauspindel, Zapfenbrecher (bis M12)
Spiralbohrer, Handgewindebohrer aus HSS, Einbauspindel, Zapfenbrecher
NFO: H ELICOIL Refill packages can be seen at accessories at www.ratioparts.com and available on request.
1
HELICOIL ® PLUS - REPAIR KITS - with inch thread #
Order.no 18-174 18-176
Number Thread size of sets 50 UNC 1/4‘‘-20 50 UNC 5/16‘‘-18
Thread Length in mm 12,7 11,9
1 1 1
18-177
50
19,1
Reference.no
UNF 3/8‘‘-24
Info Enthält Handgewindebohrer aus HSS, Handeinbauwerkzeug, Zapfenbrecher. Enthält Handgewindebohrer aus HSS, Handeinbauwerkzeug und Zapfenbrecher
INFO: H ELICOIL Refill packages can be seen at accessories at www.ratioparts.com and available on request.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 43
25
WORKSHOP
1
2
HELICOIL - SCREW TAPS # 1 2 -
Order.no 18-927 18-920 18-967 18-924 18-928 18-941 18-933 18-963 18-964 18-965 18-921 18-957
Thread size M4 M5 M5 M6 M8 M8 x 1 M10 M12x1,5 M12x1,5 M12x1,5 M14x1,25 UNC 1/4
Reference.no
Design Cutting taps Cutting taps Finishing cutter Cutting taps Cutting taps Cutting taps Cutting taps Cutting taps Pre cutter Finishing cutter Cutting taps Cutting taps
Info
Manual taps for HELICOIL速 plus and HELICOIL速
3
1 2
4
HELICOIL - REPLACEMENT SHAFT - METRIC THREAD # 1 2 1 2
Order.no 18-611 18-612 18-613 18-614
Reference.no
Thread size M5 M5 M6 M6
Info Replacement shaft to 18-610 Replacement shaft to 18-610 Replacement shaft to 18-610 Replacement shaft to 18-610
HELICOIL - SPARK PLUG THREAD REPAIR KIT #
Order.no
3
18-511
Number of sets 10 pc
4
18-940
-
Reference.no
Thread size M14 x 1,25 M14 x 1,25 M14 x 1,25 M14 x 1,25
Thread Length Info in mm 8,4 Includes a combined drilling and cutting tools, fixtured. 12,4 16,4 In order to thread the Helicoil thread of damaged metric threads. Predrilling of the mounting hole is not required. Due to the guiding principle of blind hole, it is only a limited applicability
INFO: H ELICOIL Refill packages can be seen at accessories at www.ratioparts.com and available on request.
25
25 - 44
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
2
1
3
5
4
BERU - SPARK PLUG THREAD REPAIR KIT # 1
Order.no 18-630
Info Repair kit includes: 1 x thread drill. 4x 9,5 mm flat threads, 4x 12,7 mm flat threads, 4x 19,0 mm flat threads and 4x 17,5mm conical threads.
Reference.no
INFO: P rofessional tool for repair of defective spark plug threads. With the special drill it is easy to remove the old thread and replace with the new thread. The replacement threads are safe and compression proof.
BERU - SPARE THREAD INSERTS AND DRILLS TAPS #
Order.no
2 3 4 5
18-631 18-632 18-633 18-634
Reference.no
Thread size
Packing unit QTY / pack Pack 10 Pack 10 Pack 10 Pack 10
Thread Length in mm 9,5 mm 12,7 mm 19,0 mm 17,5 mm
M14 x 1,25 M14 x 1,25 M14 x 1,25 M14 x 1,25
Info Flat threads Flat threads Flat threads Conical threads
INFO: Professional tool for repair of defective spark plug threads. With the special drill it is easy to remove the old thread and replace with the new thread. The replacement threads are safe and compression proof.
1
2
3
4
5
6
7
8
9
10
11
12
13
INSULATED TERMINALS #
Order.no
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 20 20
2-726 2-727 2-728 2-729 2-730 2-731 2-732 2-733 2-734 2-735 2-736 2-737 2-738 2-739 2-740 2-741 2-742 2-743 2-744 2-700 2-701 2-702 2-703
Ref.no
14
15
16
17
18
19
20
21
22
23
24
25
INSULATED TERMINALS
Packing QTY / Info unit pack
Connection - Ø
#
Order.no
Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack
1 2,5 6 1 2,5 6 1 2,5 1 2,5 6 1 2,5 6 4 5 6 8
20 21 21 21 21 21 22 22 22 22 22 23 23 23 24 24 24 25 25
2-704 2-705 2-706 2-707 2-708 2-709 2-710 2-711 2-712 2-713 2-714 2-715 2-716 2-717 2-718 2-719 2-720 2-724 2-725
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Crosssection in mm² 0,5 Round 1,5 sockets 4,0 0,5 Round plugs 1,5 4,0 4,8 4,8 Flat sockets 6,3 6,3 6,3 6,3 Flat plugs 6,3 6,3 2,5 Terminal jumper 6,0 1,0 Surge 2,5 jumper 6,0 1,0 1,0 Round 1,0 1,0
Ref.no
Packing QTY / Info unit pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack.
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Round lug
Forked lug
Crosssection in mm² 1,0 2,5 2,5 2,5 2,5 2,5 6,0 6,0 6,0 6,0 6,0 1,0 1,0 1,0 2,5 2,5 2,5 6,0 6,0
Connection - Ø 10 4 5 6 8 10 4 5 6 8 10 4 5 6 4 5 6 8 10
INFO: R ED = 0,5-1 mm², BLUE = 1,5-2,5 mm², YELLOW = 4-6 mm²
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
VE = Packning unit; Pck. = Pack
25 - 45
25
WORKSHOP
1
2
3
4
INSULATED TERMINALS
5
#
Order.no
1 2 3 4 5
1-524 1-525 1-526 1-527 1-528
1
Reference.no
Packing unit Pack Pack Pack Pack Pack
Colour Crosssection in mm² White 0,75 Yellow 1 Red 1,5 Blue 2,5 Grey 4
QTY / pack 100 100 100 100 100
2
Info
For connectiong uninsulated cable ends.
3
CRIMP- AND PRESS PLIERS # 1
Order.no 750-422
2 3
1-522 99-679
Reference.no
Info Crimping pliers for insulated blade terminals, cable lugs and connectors of 1.5 mm ² - 6 mm ². Stripping pliers for cables from 0.75 mm ² to 6.0 mm ². Crimping pliers - small - 2,5 mm². Original KNIPEX crimping plier, for insulated blade terminals, cable lugs and connectors of 1.5 mm ² - 6 mm ². Stripping pliers for cables from 0.75 mm ² to 6.0 mm ².
1 2
3
4
5
6
7
8
ASSORTMENT FUSES BOX and SPARE FUSES - round and flat # 1 2 2 2 2 2 2 3 4 5 6 7 8
Order.no Reference.no Packing QTY / unit pack 96-120 Pack 1 96-121 96-122 96-123 96-124 96-125 96-126 96-064 96-065 96-066 96-067 96-068 96-069
Pack Pack Pack Pack Pack Pack Pck. Pck. Pck. Pck. Pck. Pck.
5 5 5 5 5 5 5 5 5 5 5 5
Enthält Best.-Nr. See below 96-121 96-122 96-123 96-124 96-125 96-126 96-064 96-065 96-066 96-067 96-068 96-069
Size / Colour See below
Info
Typ
Fuse Kit with 90 pc. Both flat and round fuses of the most common types.
See below “SFE“- Round fuse
6,35 x 31,75
Glass fuse as a replacement, round.
Brown Red Blue Yellow Clearv Green
Plug-in fuse to replace flat.
“AGC“- Round fuse
“ATC“-Flat fuse
In Amps See below 20 A 7,5 A 10 A 15 A 20 A 30 A 5A 10 A 15 A 20 A 25 A 30 A
INFO: Flat plug fuses: For almost all lawn-tractors. Also suitable for motor-cars
25
25 - 46
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP FUSE HOLDER- for plug fuses (floating fuse) # 1
1
Order.no 101-855
Reference.no
2
Description / Info Fuse holder with connecting leads and made of plastic. It can be used for fuses up to 30 Fuse holder with connecting leads and made of plastic. It can be used for fuses up to 30A.
3
4
1
FUSE STRIPS and FUSE LINKS #
Order.no
1 1 1 2 3 4
101-833 101-834 101-835 101-837 101-836 101-838
1
Reference.no
2
3
Packing unit Pack Pack Pack Pack Pack Pack
4
5
QTY / pack 5 5 5 5 5 5
6
Colour
Info
White Red Blue
7
Fuse strips for Diesel-powered vehicles, such as construction, farm machinery, trucks. Fuse links for cars etc
8
9
10
11
12
In Amps 25 50 80 8 16 25
13
For each time detachable and reusable.
CABLE CONNECTORS # 1
Order.no Reference.no Packing unit 1-278 Pck.
QTY / pack 9
2 3 4 5 6 7 8 9 10 11
1-279 1-235 1-237 1-255 1-256 1-282 1-283 1-284 1-285 1-286
Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck. Pck.
9 7 6 6 6 25 18 12 3 3
12
1-287
Pck.
2
13
1-288
Pck.
3
Description
Info
Size
ratio-Lock Cable connectors ratio-Lock Cable connectors
Stable, vibration-resistant cable connection, without tools. 0,2 - 1,0 mm² Intuitive to use: Stripping - plug in - turn. Stable, vibration-resistant cable connection, without tools. Each time 1,0 - 2,5 mm² 2,0 - 5,0 mm² removable and reusable. 0,2 - 1,0 mm² ratio-Tap Stable branch connection without any extra cable and cutting tool. 1,0 - 2,5 mm² Wire tap Also for more improved connections. Vibration proof. 2,0 - 5,0 mm² 0,2 - 1,0 mm² ratio-Twist A stable, weather-resistant cable connector without extra tools. Hard 1,0 - 2,5 mm² Rotary connector nuts with rubber sealing‘s. 2,0 - 5,0 mm² ratio-Tite Completely waterproof connections without extra tools, by compres- 0,5 - 1,0 mm² Connector, sion sealing. Vibration proof. 1,0 - 2,0 mm² waterproof For fast and reliable security for your joints. Holds all standard flat fuses. Vibration-proof cable connection without any extra tools. ratio-Fuse Fuseholder For fast and reliable security for your joints. Holds all standard flat fuses. Vibration-proof cable connection without any extra tools.
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 47
25
WORKSHOP CABLE TIES and INSULATION TAPE - Black # 1 1 1 1 1 2
1 2
Order.no Reference.no Packing unit 1-011 Pack 1-012 Pack 1-013 Pack 1-017 Pack 1-018 Pack 1-014 Stück
QTY / pack 100 100 100 100 100 1
Info
Width in mm 2,5 To fasten throttle cables, etc. To 4,5 the lawn-mower handlebar. 4,8 Suitable for cable and hose attach 4,8 to fix. 7,6 Insulated tape - very flexible. 19,0
Length in m 100 mm 150 mm 200 mm 390 mm 365 mm 33 m
BUNDLING STRIPS # 1
1
1 1
Order.no Reference.no Packing QTY / unit pack 1-434 Pack 100 1-437 1-439
Pack Pack
100 100
Length in mm 120
Info For all plastic bags, cables, attaching tags, binders, etc. Two snap holes for good attachment. Winter resistant. FFor heavier bags of all kinds, ties for cables, wires, rods, pipes and hoses.
240 320
INFO: T he circular profile in combination with the special lock ensures maximum strength and reliable closing. Almost indefinitely. Environmentally friendly since polyethylene is ground water and rot. Can be burned without any harm for the environment
HOT AIR GAS PISTOL - SPARE CARTRIDGES 1
2
1
# 1
Order.no 2-777
2
2-778
Reference.no
Info Handy and lightweight heat gun with protective spring for heat shrinking or like. Operated with a gas cartridge (burn time approx 2 hours). With piezo ignition and valve regulated temperature setting 400-750 ° C. Refill cartridge (butane / propane)
HEAT SHRINKABLE TUBE 2:1 # 1 1 1 1 1 1 1
Order.no Reference.no Info 2-7601 2-7611 2-7621 2-7631 2-7641 2-7651 2-7661
Heat shrinkable tube, temp. range from -55 °C bis 125 °C.
Supplied Ø Length per in mm pack in m 3,2 4,8 6,4 9,5 12,7 19 25,4
20 10 10 10 10 5 5
Dimension after full shrinkage-Ø in mm 1,6 2,4 3,2 4,8 6,4 9,5 12,7
HEAT SHRINKABLE TUBE 3:1 1
# 1 1 1 1 1 1 1
Order.no Reference.no Info
Supplied Ø Length per Dimension after in mm pack in m full shrinkage-Ø in mm Thin-walled, flexible heat 3 20 1 shrinkable tube, shrink 4,8 10 1,6 relation 3:1. 6 different 6 10 2 types of tubes, covers the 9 10 3 entire range of Ø1-24 12 10 4 mm. Reliable for electrical 19 5 6 insulation and protection 24 5 8 against corrosion.
2-7701 2-7791 2-7711 2-7721 2-7731 2-7741 2-7751
ASSORTMENT BOX - OF WOODRUFF KEYS # 1
Order.no 1-345
Reference.no
Info All the popular types. Contaions 250 pcs.
1
25
25 - 48
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP HALF MOON WEDGES as replacement # 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
rder.no 24-034 is suitable for O themost ordinary knife hubs!
Order.no Reference.no Packing unit 24-030 Pack 24-031 Pack 24-032 Pack 24-033 Pack 24-034 Pack 24-035 Pack 24-036 Pack 24-037 Pack 24-038 Pack 24-039 Pack 418-640 Pack 418-657 Pack Pack 418-665 418-673 Pack 418-699 Pack 418-798 Pack 418-806 Pack
QTY / pack 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Dimension in mm bxlxh 1,59 x 9,53 x 4,37 2,38 x 9,53 x 3,97 3,18 x 15,88 x 5,95 3,18 x 19,05 x 7,54 3,97 x 15,88 x 5,95 3,97 x 19,05 x 7,54 3,97 x 22,23 x 9,13 4,76 x 15,88 x 5,95 4,76 x 19,05 x 7,54 4,76 x 22,23 x 9,13 2,38 x 9,53 3,18 x 9,53 -
Dimension in inch bxlxh 1/16‘‘ x 3/8‘‘ x 11/64‘‘ 3/32‘‘ x 3/8‘‘ x 5/32‘‘ 1/8‘‘ x 5/8‘‘ x 15/64‘‘ 1/8‘‘ x 3/4‘‘ x 19/64‘‘ 5/32‘‘ x 5/8‘‘ x 15/64‘‘ 5/32‘‘ x 3/4‘‘ x 19/64‘‘ 5/32‘‘ x 7/8‘‘ x 23/64‘‘ 3/16‘‘ x 5/8‘‘ x 15/64‘‘ 3/16‘‘ x 3/4‘‘ x 19/64‘‘ 3/16‘‘ x 7/8‘‘ x 23/64‘‘ 3/32‘‘ x 3/8‘‘ 1/8‘‘ x 3/8‘‘ 1 1/16‘‘ x 1/2‘‘ 3/32‘‘ x 1/2‘‘ 3/32‘‘ x 5/8‘‘ 1/4‘‘ x 3/4‘‘ 1/4‘‘ x 7/8‘‘
1 6
7
2
3
4
5
LUBRICATING NIPPLE with METRIC THREAD - ASSORTIMENT BOX and REPLACE LUBRICATION NIPPLES #
Order.no
1 2 3 4 2 3 4 2 3 4 5
96-092 96-093 96-094 96-095 96-096 96-097 96-098 96-099 96-100 96-101 96-102
Reference.no
Description Assortment Box. H1 H2 H3 H1 H2 H3 H1 H2 H3 Red cap with flap.
Packing unit Piece Pack Pack Pack Pack Pack Pack Pack Pack Pack Pack
QTY / pack 1 10 10 10 10 5 5 5 5 5 10
Design
Outside Threadin mm / pitch 6x1 6x1 6x1 8x1 8x1 8x1 10 x 1 10 x 1 10 x 1 -
Straight 45° 90° Straight 45° 90° Straight 45° 90° -
Quantity / Assortment box 20 10 10 20 10 10 5 5 5 45
SPLINT PINS and O-RINGS - ASSORTIMENT BOX # 6
Order.no Reference.no Packing unit 415-141 Piece
7
415-299
Piece
QTY / pack Design 1 Assortment splint pins 1 Assortment O-Rings, Neopren
Content 150 St.: 1/16‘‘ x 1‘‘, 150 St.: 3/32‘‘ x 1‘‘, 20 St.: 1/8‘‘ x 1/4“, 20 St.: 5/32“ x 9/32“, 20 St.: 3/16“ x 5/16“, 15 St.: 7/32“ x 11/32“, 15 St.: 1/4“ x 3/8“, 15 St.: 5/16“ x 7/16“,
100 St.: 3/32‘‘ x 1-3/4‘‘ 75 St.: 1/8‘‘ x 1-1/4‘‘ 10 St.: 3/8“ x 1/2“, 10 St.: 3/8“ x 9/16“, 10 St.: 7/16“ x 5/8“, 10 St.: 1/2“ x 11/16“, 10 St.: 9/16“ x 3/4“, 10 St. 5/8“ x 13/16“,
VE = Packning unit; Pck. = Pack; = While stocks last. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
50 St.: 1/8“ x 2“ 30 St.: 5/32‘‘ x 2-1/2‘‘ 10 St.: 11/16“ x 7/8“, 10 St.: 3/4“ x 15/16“, 10 St.: 3/4“ x 1“, 10 St.: 13/16“ x 1-1/16“, 10 St.: 7/8“ x 1-1/8“, 10 St.: 15/16“ x 1-3/16“ 25 - 49
25
WORKSHOP
1
2
ASSORTMENT BOXES - SECURITY BOLT - with cotter pin and lock rings # 1
Order.no 415-380
2
415-166
Reference.no
Info Assortment box Security bolt with spring pin Assortment box E-clips
1
Content 5 pc.: 5/16‘‘ x 2“, 18 St.: 3/8“ x 2“, 5 pc.: 7/16“ x 2 1/2“, 3 pc.: 1/2“ x 2“, 5 pc.: Spring pin L: 30,5 mm x Ø 2,00 mm, 32 pc.: Spring pin L: 41,3 mm x Ø 2,33 mm, 3 pc.: Spring pin L: 49,9 mm x Ø 3,23 mm 30 pc.: 1/16‘‘, 30 pc.: 1/8“, 40 pc.: 3/16“, 50 pc.: 1/4“, 50 pc.: 3/8“, 40 pc.: 1/2“, 20 pc.: 5/8“, 20 pc.: 3/4“, 20 pc.: 7/8“
STEEL KEY STOCK - zink plated #
Order.no
1 1 1 1
1-474 1-464 1-473 1-4751
Reference.no
Dimensions in mm 7,94 x 7,94 4,76 x 4,76 6,35 x 6,35 9,5 x 9,5
Dimensions in inch 5/16“ x 5/16“ 3/16‘‘ x 3/16“ 1/4‘‘ x 1/4“ 3/8‘‘ x 3/8‘‘
Length
12‘‘ = 305 mm
1
SET OF GASKET MATERIAL # 1
1
Order.no 96-070
Reference.no
Info 7sheets of material 15x15 cm for flange and muffler gaskets.
2
3
ASSORTMENT BOXES - EMPTY, SELF-ASSEMBLE, WITH LOCKABLE LID # 1 2 3
25
25 - 50
Order.no Reference.no Number of pockets 415-034 12 415-035 12 901-000 18
Size of pockets in mm 12 x 39 x 42 mm 6 x 39 x 65 mm
Length in mm 210 250 250
Wide in mm 114 175 175
Height in mm 35 45 45
Material
Design / color
Polystyrol (PS) Polypropylen (PP) Polypropylen (PP)
Transparent Yellow. Lid: transparent Blue. Lid: transparent
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP RATIOPARTS ASSORTMENT BOX - EMPTY # 1
1
Order.no Reference.no Number Length of pockets in mm 415-037 4 180
Wide in mm 120
Height Design / in mm color 40 orange
Info With euro hole standard to hang on the store shelf. To store chainsaws u.v.m. Comes with no content.
Refill kits and individual items can be found on the catalog pages 10-29 to 10-31. 1
2 3
ASSORTMENT BOX - NIPPLES - SOCKETS - SCREWS LARGE 1 # 1
Order.no Reference.no Contains order.no 23-586
Content / piece 23-003: 10 pc.; 23-004: 10 pc.; 23-007: 6 pc.; 23-011: 10 pc.; 23-016: 6 pc.; 23-021: 10 pc.; 23-024: 10 pc.; 338 23-025: 5 pc.; 23-034: 5 pc.; 23-037: 10 pc.; 23-038: 5 pc.; 23-039: 5 pc.; 23-041: 10 pc.; 23-043: 10 pc.; 23-048: 1 pc.; 23-500: 5 pc.; 23-502: 10 pc.; 23-505: 10 pc.; 23-506: 2 pc.; 23-512: 2 pc.; 23-513: 2 pc.; 23-515: 5 pc.; 23-516: 5 pc.; 23-517: 5 pc.; 23-518: 2 pc.; 23-519: 5 pc.; 23-520: 5 pc.; 23-521: 5 pc.; 23-527: 20 pc.; 23-529: 20 pc.; 23-530: 20 pc.; 23-535: 10 pc.; 23-536: 8 pc.; 23-542: 5 pc.; 23-543 : 5 pc.; 23-544: 5 pc.; 23-546: 5 pc.; 23-548: 10 pc.; 23-549: 5 pc.; 23-550: 2 pc.; 23-555: 10 pc.; 23-558: 5 pc.; 23-562: 5 pc.; 23-565: 5 pc.; 23-568: 1 pc.; 23-650: 10 pc.; 23-690: 1 pc.; Cable ties: 140 x 3,5: 5 pc.; Cable ties: 200 x 3,5: 5 pc.
INFO: T his assortment includes the most common solder and screw nipples, bushings and screws.
ASSORTMENT BOX - NIPPLES - SOCKETS - SCREWS LARGE 2 # 2
Order.no Reference.no Contains Order.no 23-587
Content / piece 23-003: 20 pc.; 23-004: 10 pc.; 23-007: 10 pc.; 23-011: 10 pc.; 23-016: 10 pc.; 23-021: 10 pc.; 23-025: 5 pc.; 406 23-034: 5 pc.; 23-035: 5 pc.; 23-037: 10 pc.; 23-038: 10 pc.; 23-039: 10 pc.; 23-041: 30 pc.; 23-042: 10 pc.; 23-043: 20 pc.; 23-044: 10 pc.; 23-048: 5 pc.; 23-504: 5 pc.; 23-512: 4 pc.; 23-513: 2 pc.; 23-515: 5 pc.; 23-516: 5 pc.; 23-517: 5 pc.; 23-518: 4 pc.; 23-519: 5 pc.; 23-520: 5 pc.; 23-521: 5 pc.; 23-529: 20 pc.; 23-531: 20 pc.; 23-532: 10 pc.; 23-534: 10 pc.; 23-539: 20 pc.; 23-542: 10 pc.; 23-543: 10 pc.; 23-544: 10 pc 23-549: 5 pc.; 23-555: 20 pc.; 23-558: 5 pc.; 23-563: 10 pc.; 23-565: 5 pc.; 23-568: 1 pc.; 23-650: 10 pc.; 23-690: 5 pc.
INFO: T his assortment includes the most common solder and screw nipples, bushings and screws.
ASSORTMENT - NIPPLES - SOCKETS - COMBINATION 1 # 3
Order.no Reference.no Contains Order.no 23-624
23-004: 4 pc.; 23-007: 4 pc.; 23-008: 2 pc.; 23-037: 6 pc.; 23-041: 6 pc.; 23-042: 6 pc.; 23-044: 3 pc.; 23-520: 4 pc.; 23-521: 4 pc.; 23-563: 3 pc.; 23-564: 2 pc.
Content / piece 44
INFO: D This assortment includes a mix of: threaded nipple, soldering nipple and sleeves.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 51
25
WORKSHOP
1
T his assortment includes a mix of: threaded nipple and soldering nipples.
This assortment includes the most popular types. 2
3
ASSORTMENT - NIPPLES - SOCKETS - COMBINATION 2 # 1
Order.no Reference.no Contains Order.no 23-625
This assortment includes the most popular types.
Refill kits and individual items can be found on the catalog pages 10-29 to 10-31.
23-007: 4 pc.; 23-014: 4 pc.; 23-016: 4 pc.; 23-034: 4 pc.; 23-037: 6 pc.; 23-038: 4 pc.; 23-041: 6 pc.; 23-042: 6 pc.; 23-043: 4 pc.; 23-044: 3 pc.; 23-520: 5 pc.; 23-521: 5 pc.; 23-525: 5 pc.; 23-542: 4 pc.; 23-543: 4 pc.; 23-544: 4 pc.; 23-555: 4 pc.; 23-563: 3 pc.; 23-564: 2 pc.
Content / piece 80
ASSORTMENT OF SOLDERING NIPPLES 1 # 2
Order.no Reference.no Contains Order.no 23-900
23-006: 10 pc.; 23-011: 10 pc.; 23-014: 10 pc.; 23-015: 10 pc.; 23-016: 10 pc.; 23-017: 20 pc.; 23-019: 10 pc.; 23-021: 10 pc.; 23-022: 10 pc.; 23-024: 10 pc.; 23-027: 10 pc.
Content / piece 120
ASSORTMENT OF SOLDERING NIPPLES 2 # 3
Order.no Reference.no Contains Order.no 23-626
23-003: 5 pc.; 23-004: 10 pc.; 23-007: 10 pc.; 23-008: 1 pc.; 23-021: 3 pc.; 23-024: 3 pc.; 23-025: 4 pc.; 23-501: 4 pc.; 23-502: 4 pc.; 23-503: 4 pc.; 23-504: 4 pc.; 23-506: 1 pc.; 23-507: 1 pc.; 23-525: 3 pc.; 23-527: 4 pc.; 23-529: 7 pc.; 23-530: 4 pc.; 23-531: 4 pc.; 23-532: 4 pc.; 23-533: 7 pc.; 23-537: 3 pc.; 23-538: 3 pc.; 23-540: 12 pc.; 23-542: 5 pc.; 23-543: 5 pc.; 23-544: 7 pc.; 23-545: 4 pc.; 23-546: 4 pc.; 23-550: 1 pc.
1
2
This assortment contains the most common nipple for lawnmowers, agricultural machineryand your motorcycle.
Content / piece 131
Refill kits and individual items can be found on the catalog pages 10-29 to 10-31.
This assortment contains the most common nipple and 2 bowden cables for lawnmowers, agricultural machinery and your motorcycle. It belongs in every tool kit!
ASSORTMENT MOTORCYCLES 1 # 1
Order.no Reference.no Contains Order.no 23-644
23-008: 3 pc.; 23-037: 3 pc.; 23-039: 3 pc.; 23-042: 3 pc.; 23-058: 1 pc.; 23-508: 3 pc.; 23-511: 1 pc.; 23-514: 3 pc.; 23-516: 5 pc.; 23-517: 5 pc.; 23-521: 5 pc.; 23-522: 3 pc.; 23-523: 3 pc.; 23-524: 3 pc.; 23-525: 3 pc.;23-547: 3 pc.; 23-555: 3 pc.; 23-559: 3 pc.; 23-560: 3 pc.; 23-561: 2 pc.; 23-563: 3 pc.; 23-566: 2 pc.; 23-569: 1 pc.; 23-570: 1 pc.;
Content / piece 68
ASSORTMENT BOWDEN CABLE -TIRE REPAIR - MOTORCYCLES 2 # 2
25
25 - 52
Order.no Reference.no Contains Order.no 23-645
23-003: 1 pc.; 23-016: 1 pc.; 23-037: 1 pc.; 23-042: 1 pc.;23-508: 1 pc.; 23-558: 1 pc.; 23-566: 1 pc.; Bowden cable-Ø: 1,25 mm, Länge: 1,60 m mit Nippel Bowden cable-Ø: 1,60 mm, Länge: 1,60 m mit Nippel.
Content / piece 9
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP This assortment contains the most common threaded nipples!
This assortment contains the most common threaded nipples! 1
2
3
Refill kits and individual items can be found on the catalog pages 10-29 to 10-31.
SCREW NIPPLE ASSORTEMENT 1 #
Order.no Reference.no Contains Order.no 23-901
1
T his assortment contains the most common nipple for lawnmowers, agricultural machineryand your motorcycle.
23-034: 10 pc.; 23-036: 10 pc.; 23-037: 10 pc.; 23-038: 10 pc.; 23-039: 10 pc.; 23-040: 10 pc.; 23-041: 10 pc.; 23-042: 10 pc.; 23-043: 10 pc.; 23-044: 10 pc.; 23-047: 10 pc.; 23-049: 10 pc.
Content / piece 120
SCREW NIPPLE ASSORTEMENT 2 #
Order.no Reference.no Contains Order.no 23-648
2
23-034: 7 pc.; 23-035: 2 pc.; 23-036: 2 pc.; 23-037: 8 pc.; 23-038: 2 pc.; 23-039: 5 pc.; 23-040: 1 pc.; 23-041: 12 pc.; 23-042: 12 pc.; 23-043: 4 pc.; 23-044: 3 pc.; 23-509: 2 pc.; 23-510: 2 pc.; 23-555: 4 pc.; 23-558: 2 pc.; 23-562: 3 pc.; 23-563: 3 pc.; 23-565: 4 pc.; 23-568: 2 pc.; 23-571: 2 pc.
Content / piece 82
SCREW NIPPLE ASSORTEMENT 3 #
Order.no Reference.no Contains Order.no 23-584
3
23-004: 5 pc.; 23-007: 6 pc.; 23-008: 2 pc.; 23-016: 10 pc.; 23-034: 5 pc.; 23-037: 4 pc.; 23-041: 6 pc.; 23-042: 8 pc.; 23-044: 5 pc.; 23-048: 1 pc.; 23-501: 3 pc.; 23-504: 5 pc.; 23-513: 2 pc.; 23-520: 10 pc.; 23-521: 5 pc.; 23-528: 5 pc.; 23-529: 5 pc.; 23-533: 5 pc.; 23-541: 8 pc.; 23-543: 5 pc.; 23-551: 2 pc.; 23-552: 2 pc.; 23-563: 5 pc.; 23-564: 5 pc.; 23-650: 2 pc.; 23-690: 1 pc.;
Content / piece 122
ASSORTEMENT BOX - SPRING WASHERS
1
#
Order.no
1
1-009
Reference.no
Insider-Ø in mm 4 - 13,6
Outside-Ø Content / in mm piece 11,5 - 29,4 190
INFO: C omplete assortment, contains ratioparts order.no. from 1-050 to 1-061.
SPRING WASHERS - REFIL PACK # 1
2
1 1 1 1 1 1 1 2 2 2 2 2
Order.no Reference.no Packing unit 1-050 Pack 1-051 Pack 1-052 Pack 1-053 Pack 1-054 Pack 1-055 Pack 1-056 Pack 1-057 Pack 1-058 Pack 1-059 Pack 1-060 Pack 1-061 Pack
QTY / pack 20 20 20 20 20 20 20 10 10 10 10 10
Outside-Ø in mm 11,5 11,5 15 15 18 25 28 16 16 19,5 26 29,4
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Insider-Ø in mm 4 4,6 5,6 7,6 9,7 11,7 13,6 5,6 7,6 9,7 11,5 13,6
Info
Self-fastening saftey washers for shafts tc.
Self-washers for shafts, wheels. etc.
25 - 53
25
WORKSHOP LOCK RINGS to SHAFT 1
1
#
Order.no
1 1 1 1 1 1 1 1 1
416-289 416-297 416-305 416-313 416-321 416-339 416-347 416-354 416-362
Reference.no
Packing Content unit
Pack
2
Order.no 96-127
Reference.no
Size in inch 1/16‘‘ 1/8‘‘ 3/16‘‘ 1/4‘‘ 3/8‘‘ 1/2‘‘ 5/8‘‘ 3/4‘‘ 7/8‘‘
3
Refill kits, see: www.ratioparts.com
ASSORTMENT HOSE CLAMPS # 1
10
Size in mm 1,59 3,18 4,76 6,35 9,53 12,70 15,88 19,05 22,23
Content 60 pc.: 1/2“, 40 pc.: 5/16“, 30 pc.: 1/4“-1/2“, 30 pc.: 7/16“
MEMBRANES ASSORTMENT - WALBRO CARBURETOR # 2
Order.no 151-159
3
151-160
Reference.no
Description Seal and membrane assortment for WALBRO WAT-carburetors, 240-piece
Seal and membrane assortment for WALBRO HD / HDA-carburetors, 120-teilig
1
2
Content 15 x Membrane to Walbro 95-526, 15 x Membrane to Walbro 95-118, 15 x Membrane to Walbro 95-56, 15 x Seal to Walbro 92-327, 15 x Seal to Walbro 95-57, 15 x Membrane to Walbro 95-126, 15 x Membrane to Walbro 95-83, 15 x Seal to Walbro 92-251, 15 x Membrane to Walbro 95-561, 15 x Seal to Walbro 92-222, 15 x Seal to Walbro 92-220, 15 x Membrane to Walbro 95-552,
3
15 x Seal to Walbro 92-337, 15 x Seal to Walbro 92-214, 15 x Seal to Walbro 92-142, 15 x Seal to Walbro 92-357, 15 x Seal to Walbro 92-170, 15 x Seal to Walbro 92-318, 15 x Seal to Walbro 92-206, 15 x Membrane to Walbro 95-130. 15 x Seal to Walbro 95-295, 15 x Seal to Walbro 92-218, 15 x Membrane to Walbro 95-119, 15 x Membrane to Walbro 92-346.
Refill kits and individual items can be found on pages 9-56 to 9-57 in the catalog.
FUEL FILTER - ASSORTMENT
25
# 1
Order.no 170-245
2
170-246
Fuel filter assortment 64 pc.
3
170-199
Fuel filter assortment 45 pc.
25 - 54
Reference.no
Description Fuel filter assortment 74 pc.
Contains Order.no 170-1761: 5 pc.; 170-012: 10 pc.; 170-013: 10 pc.; 170-014: 5 pc.; 170-016: 5 pc.; 170-167: 7 pc.; 170-011: 12 pc.; 170-010: 10 pc.; 170-015: 10 pc.; 170-1761: 5 pc.; 170-012: 10 pc.; 170-013: 5 pc.; 170-180: 2 pc.; 170-167: 5 pc.; 170-079: 2 pc.; 170-011: 10 pc.; 170-247: 2 pc.;170-010: 10 pc.; 170-248: 2 pc.; 170-015: 10 pc.; 170-249: 2 pc.; 170-188: 2 pc.; 170-079: 10 pc.; 170-080: 5 pc.; 170-179: 5 pc.; 170-180: 5 pc.; 170-181: 5 pc.; 170-182: 5 pc.; 170-188: 10 pc.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
3
CIRCULAR SAW BLADES for portable circular saws, with carbide tip # 1 2 1 1
Order.no Reference.no Outside-Ø in mm 177-112 140 177-113 140 177-114 150 177-116 150
Hole-Ø in mm 20/12,75 20/12,75 16 20
Number of teeth 12 30 12 12
Teeth profile F W F F
1 2 3
177-120 177-121 177-103
160 160 160
20/16 20/16 20/16
12 36 42
F W TF
1 2 2 1 2 1 2 1 2 1 2
177-124 177-125 177-131 177-128 177-129 177-132 177-133 177-134 177-135 177-136 177-137
180 180 190 190 190 200 200 210 210 230 230
20/16 20/16 30 20/16 20/16 30/25 30/25 30/25 30/25 30/25 30/25
14 36 42 14 42 16 42 16 42 20 48
F W W F W F W F W F W
Info
Suitable for manufacturer
BLACK & DECKER BLACK & DECKER BOSCH, SCHEER Circular saw blade AEG, ELU, FEIN, HITACHI, MAKITA, METABO, for wood PEUGEOT, SCHEER, SKIL BOSCH, PEUGEOT, RYOBI, SCHEER, SKIL, ULMIA, AEG, FEIN, FESTO, HAFFNER, HOLZ-HER., KRESS, Universal circular BOSCH, PEUGEOT, RYOBI, SCHEER, SKIL, ULMIA, saw blade for wood, AEG, FEIN, FESTO, HAFFNER, HOLZ-HER., KRESS, plastic, aluminum, MAFELL, MAKITA etc. BLACK & DECKER, ROCKWELL, RYOBI, SKIL, STANLEY, HAFFNER, MAKITA, METABO AEG, BOSCH, ELU, HITACHI, HOLZ-HER, SCHEER BOSCH, KRESS, MAKITA, METABO, SCHLEICHER Circular saw blade for wood
AEG, MAKITA, ULMIA, BOSCH, ELU, FESTO, HAFFNER, HOLZ-HER AEG, BLACK & DECKER, ELU, FEIN, HAFFNER, HITACHI, HOLZ-HER, MAFELL, MAKITA, SKIL AEG, BOSCH, HAFFNER, HOLZ-HER, SCHEER
INFO: W = Alternate tooth, F = Flat tooth, TF = Trapeze flat tooth. The types “W“ and “F“ for wood, “TF“ for universal use.
1
2
3
CIRCULAR SAW BLADES - for construction and wood circular saws #
Order.no Reference.no Info
1 2 1
177-705 177-503 177-505
3 3 2 1
177-399 177-454 177-504 177-453
Carbide tipped Carbide tipped, with special flat-sided chamfer for extreme loads. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections. Carbide tipped, with limiter depth of cut. Standard tooth form. Carbide tipped, with special flat-sided chamfer for extreme loads. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Outside-Ø in mm 180 300 300
Hole-Ø in mm 16 30 30
Thickness in mm 3,2 1,6
Number of teeth 36 20 56
300 400 400 400
30 30 30 30
3,2 3,8 3,8 2
20 28 28 56
25 - 55
25
WORKSHOP 1
2
3
4
CIRCULAR SAW BLADES - for construction and wood circular saws #
Order.no Reference.no Info
3 3 2 1
177-400 177-450 177-451 177-452
3 2 1
177-500 177-501 177-502
3 1
177-600 177-602
1 3 3 1
177-603 177-601 177-700 177-702
1 3 3
177-703 177-701 177-706
Carbide tipped, with limiter depth of cut. Standard tooth form. Carbide tipped, with special flat-sided chamfer for extreme loads. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections. Carbide tipped, with special flat-sided chamfer for extreme loads. Carbide tipped, with special flat-sided chamfer for extreme loads. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections. Harbide tipped, with limiter depth of cut. Standard tooth form. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections. Made of chrome vanadium steel with rough teeth. Carbide tipped Carbide tipped, with special flat-sided chamfer for extreme loads. Made of chrome vanadium steel with rough teeth. Longitudinal design and cross-sections. Made of chrome vanadium steel with rough teeth. Carbide tipped
Outside-Ø in mm 400 450 450 450
Hole-Ø in mm 30 30 30 30
Thickness in mm 3,5 3,6 3,8 2,5
Number of teeth 32 32 32 56
500 500 500
30 30 30
4,0 4,0 2,5
36 36 56
600 600
30 30
4,2 2,8
36 56
600 600 700 700
35 35 30 30
2,8 4.2 4,2 3,2
56 36 42 56
700 700 750
35 35 30
3,2 4.2 4,5
56 42 46
REDUCING RINGS for circular saw blades # 4 4 4
Order.no 6-096 6-0961 6-0962
Reference.no
Info To reduce 30 mm to 28 mm hole-Ø. To reduce 35 mm to 30 mm hole-Ø. To reduce 30 mm to 25,4 mm hole-Ø.
1
Powerpackage Superior Advantageous Economical
- Cut it all! - Cutting speed! - In dry cutting! ! - No blade change
DIAMANT-DISCS “CUT-IT-ALL“ # 1 1 1 1 1 1
25
25 - 56
Order.no Reference.no Operating area 66-082 66-083 Steel, cast iron, 66-084 PVC, wood, stone, 66-085 concrete, brick. 66-086 66-087
Outside-Ø in mm 115 125 230 300 350 400
Hole-Ø in mm 22,2 22,2 22,2 20 20 20
Thickness in mm 2,2 2,2 2,8 3,1 3,3 3,3
Info Up to 30% faster than conventional diamond cutting discs. Superior cutting speed in almost all materials such as steel, concrete, stone, cast iron, PVC and wood. Ideal for dry cutting angle. Petrol driven power cutters. No blade change required!
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
3
Für Beton und Stein etc.
„Turbo-Scheibe“ für Beton, Waschbeton und Granit
Für Fliesen, Keramik, dünne Granit- und Marmorplatten.
DIAMANT-CUTTING DISCS - for electric cutting machine - EN13236 #
Order.no Reference.no Design 66-001 66-002 66-004 66-005 66-014 66-015 66-016 66-017 66-020 66-021 66-023 66-024
1 1 1 1 2 2 2 2 3 3 3 3
Cutting edge
Operating area
TLE30
Open
Concrete, stone.
TGS15
Open
Concrete, Washed concrete, Granit
TGS20
Closed
Tiles, ceramics, thin Granit and marble panels. Clean cut edges on painted surfaces.
Outside-Ø in mm 115 125 180 230 115 125 180 230 115 125 180 230
Hole-Ø in mm 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
No. of segments/ wide x height in mm 9 / 2,0 x 10 10 / 2,2 x 10 14 / 2,4 x 10 16 / 2,4 x 10 - / 1,9 x 7 - / 1,9 x 7 - / 2,3 x 7 - / 2,5 x 7 - / 1,6 x 5 - / 1,6 x 5 - / 2,0 x 5 - / 2,0 x 5
INFO: N o. Column system design: 1.) T = Dry, N = Wet, 2.) L = Laser welded, G = Sintering, 3.-5.) E = Economy (cheap), S = Standard, BS = Concrete standard, BP = Concrete-Premium, AS = Asphalt standard, PFR = Granit-gray, lime-KRO = Red sandstone, UBL = Universal Blue, 4-7.) 15 = Indicator diamond proportions, 6.-10. ) 300 = Outside-Ø, 9.-13.) 20.0 = inside-Ø (=listed in the Table in Separate columns). Example: TLBP50/400-20,0 = Dry, laser welded, concrete-Premium, 50 = diamond proportions, 400 = AD, 20.0 = Hole. All plates for dry-cutting are also suitable for wet-cutting!
1
For concrete and stone, etc.
DIAMANT-CUTTING DISCS - for petrol-cutting machine - EN13236 #
Order.no
1 1
66-125 66-126
Reference.no
Design
Cutting edge
TLBS30
Open
Operating area Concrete, stoneware and wett concrete. Floor saws up to 13 hp.
Outside-Ø in mm 300 350
Hole-Ø in mm 25,4/20
No. of segments/ wide x height in mm 20 / 2,8 x 10 24 / 2,8 x 10
INFO: N o. Column system design: 1.) T = Dry, N = Wet, 2.) L = Laser welded, G = Sintering, 3.-5.) E = Economy (cheap), S = Standard, BS = Concrete standard, BP = Concrete-Premium, AS = Asphalt standard, PFR = Granit-gray, lime-KRO = Red sandstone, UBL = Universal Blue, 4-7.) 15 = Indicator diamond proportions, 6.-10. ) 300 = Outside-Ø, 9.-13.) 20.0 = inside-Ø (=listed in the Table in Separate columns). Example: TLBP50/400-20,0 = Dry, laser welded, concrete-Premium, 50 = diamond proportions, 400 = AD, 20.0 = Hole. All plates for dry-cutting are also suitable for wet-cutting!
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 57
25
WORKSHOP
1
2
3
For asphalt, fresh concrete.
4
For universal use, concrete, exposed concrete and bricks.
For hard rock, brick and granite.
DIAMANT-CUTTING DISCS for petrol-cutting machine, floor saws - EN13236 #
Order.no Reference.no Design 66-127 66-128 66-130 66-031 66-032 66-033 66-131 66-135 66-132
1 1 1 1 1 1 2 2 2
Cutting edge
Operating area
TLBP40
Open
Concrete reinforced),, stoneware and wett concrete. Floor saws up to 13 hp.
TLAS60
Open
Asphalt, green concrete. For gasoline cutting machine. Floor saws up to 13 hp.
Outside-Ø in mm 300 350 400 450 500 600 300 350 400
Hole-Ø in mm
25,4/20
25,4/20
No. of segments/ wide x height in mm 20 / 2,8 x 10 24 / 2,8 x 10 28 / 3,2 x 10 32 / 3,6 x 10 36 / 3,6 x 10 40 / 4,0 x 10 20 / 2,8 x 10 24 / 2,8 x 10 28 / 3,2 x 10
INFO: N o. Column system design: 1.) T = Dry, N = Wet, 2.) L = Laser welded, G = Sintering, 3.-5.) E = Economy (cheap), S = Standard, BS = Concrete standard, BP = Concrete-Premium, AS = Asphalt standard, PFR = Granit-gray, lime-KRO = Red sandstone, UBL = Universal Blue, 4-7.) 15 = Indicator diamond proportions, 6.-10. ) 300 = Outside-Ø, 9.-13.) 20.0 = inside-Ø (=listed in the Table in Separate columns). Example: TLBP50/400-20,0 = Dry, laser welded, concrete-Premium, 50 = diamond proportions, 400 = AD, 20.0 = Hole. All plates for dry-cutting are also suitable for wet-cutting!
DIAMANT-CUTTING DISCS for bench saws - EN13236 #
Order.no Reference.no Design 66-049 66-050 66-041 66-042
3 3 4 4
Cutting edge
NLGGR35 Open NLUBL50
Open
Operating area
Outside-Ø in mm 300 Hard rock, brick, granite. 350 For universal area, concrete, exposed aggre- 300 gate concrete, brick. 350
Hole-Ø in mm 25,4 / 20 25,4 / 20
No. of segments/ wide x height in mm 32 x 2,8 x 10 38 x 2,8 x 10 20 x 2,8 x 10 24 x 2,8 x 10
INFO: N o. Column system design: 1.) T = Dry, N = Wet, 2.) L = Laser welded, G = Sintering, 3.-5.) E = Economy (cheap), S = Standard, BS = Concrete standard, BP = Concrete-Premium, AS = Asphalt standard, PFR = Granit-gray, lime-KRO = Red sandstone, UBL = Universal Blue, 4-7.) 15 = Indicator diamond proportions, 6.-10. ) 300 = Outside-Ø, 9.-13.) 20.0 = inside-Ø (=listed in the Table in Separate columns). Example: TLBP50/400-20,0 = Dry, laser welded, concrete-Premium, 50 = diamond proportions, 400 = AD, 20.0 = Hole. All plates for dry-cutting are also suitable for wet-cutting!
1
DIAMANT-CUTTING DISCS - “ALLROUND“ # 1 1 1 1
25
25 - 58
Order.no Reference.no Design 66-088 66-089 66-090 66-091
LBA65
Cutting edge
Open
Operating area
Outside-Ø in mm 300 All-around blade for concrete, asphalt 350 and brickwork for dry and wet cutting. 400 450
Hole-Ø in mm 25,4 / 20
No. of segments/ wide x height in mm 20 / 3,0 x 10 24 / 3,0 x 10 28 / 3,0 x 10 32 / 3,0 x 10
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP REDUCING RINGS - for diamond cutting discs
2
1
# 1 1 1 1 2
Image only exemple!
1
Order.no 66-170 66-171 66-172 66-173 66-174
Reference.no
From-Ø in mm 25,4 25,4 25,4 25,4 25,4
To-Ø in mm 20 20 20 20 20
H in mm 1,8 2,2 2,5 2,8 7
2
DIAMOND DRILL “DRY“ - for freehand drilling without dust extraction #
Order.no
1 2
66-430 66-431
Reference.no
Replaces original Operating order.no. area
Outside-Ø in mm
DSF 68-6003 DSF 82-6004
68 80
Standard type, in limestone, pumice, aerated concrete, masonry, abrasive materials.
Effective Length in mm 60 60
No. of Connection segments 3 4
M 16 M 16
MACHINE ADAPTER - for socket drill / center drill 2
1
#
Order.no
1
66-432
2
66-433
Reference.no
Replaces original order.no. MABF6, M16-8 MM MASDS, M16-8 MM
1
Suitable for manufacturer STANDARD DRILL WITH DRILL CHUCK Hilti, fine
Adapter with center drill 6-Kant / M16 kompl. 8 mm center drill. SDS + / M16 kompl. 8 mm center drill.
2
EASY TURNER - LIFTING - and CLEANING HELP #
Order.no
1
99-044
Reference.no
max. Total weight of Suitable for the lawn tractor 300 kg e.g.TwinCut Junior 92 cm, Twin Cut 102 cm, AGS 102 cm, Dino 102 cm, MTD Rear ejector mower 102/105 cm
Wheel distance, Outer edge of wheel 800 - 1000 mm
LIFTING / CLEANING HELP - for lawn tractor # 2
Order.no 99-040
Reference.no
Info Cleaning help for all common lawn tractors. Maximum weight is 150 kg. No assembly or service platform required. Galvanized surface. Space-saving storage, as completely disassembled. Lifting height of about 55 - 60 cm.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 59
25
WORKSHOP 1
2
3
suitable for
SAFETY - LOADING RAMPS #
Order.no
1 1 1 1 2 2 2 2 2 3 3 3
99-455 99-456 99-457 99-458 99-452 99-453 99-464 99-454 99-461 99-460 99-459 99-463
Reference.no
Packing QTY / Version unit pack Aluminium, curved.
Kit
2 Aluminium, straight.
Lengthin mm 1500 2000 2000 2500 1500 2000 1500 2000 3000 2000 2500 3000
Load capacity in kg / Kit 400 400 1000 1000 400 400 1000 1000 1000 2000 2000 2000
Width in mm 200 200 260 260 200 200 260 260 260 260 260 260
Approvals
INFO: More ramps up to 4000 kg load capacity and different lengths on request. Order.no. 99-459, 99-460, 99-461, 99-463 are RANGE OF BUSINESS, inquire about terms for this delivery.
ANGLE BRACKET SET - for safety loading ramps # 1
1
Order.no 99-462
Reference.no
Content 2 angle plates, 4 screws , 4 nuts
Info Prevent the ramp slipping of the from the loading edge.
LOADING RAMPS “RAMP CHAMP“ # 1 2
Order.no Reference.no Packing unit 99-450 Set 99-451 Piece
QTY / pack 2 1
Load capacity in kg / Kit ca. 350 l-
Length in cm 163-244 36
Width in mm 241 -
INFO: S pace-saving telescopic extendable loading ramps. Durable: Stainless. Weight: Only 13 kg per piece. Shape: Curved design. Safety: Small edges avoids to run off and crash. Design: Revolutionary new design.
1
2
LOADING RAMP “EZ LIFT“ 1
# 1
Order.no Reference.no Packing unit 96-000 1 Pair
Info This innovative „lift / load“ ramp allows easy, quick and easy lawn mower service. The innovative design of the lawn tractor can be raised up to 150 mm - without additional equipment. Ideal for mowing or clean knife or oil changes. Made of robust plastic.
INFO: R equest, use only on hard ground. Load capacity up to 226 kg / pair. Special price of 4 pairs to use!
25
25 - 60
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
ACCESS RAMPS “RAMPARTS“ #
Order.no Reference.no Packing unit 1-9701 Set
1
QTY / Width pack in mm 2 x 2 305
Info Self-cost set of access ramps. You only need 2 pieces. Thickness 4 cm and width 300 mm. Length is specify by how many. Contents: Complete Set (2 top x 2 down, with screws).
WHEEL WEIGHTS
1
# 1
Order.no 96-004
Reference.no
Description Wheel weights
Info 12“ = Ø 305 mm. Plastic, blow moulded. Can be filled with sand or similar. Increases the weight per wheel by up to 20 kg. Complete without mounting material.
QUICK-CLEAN - LAWNMOWER CLEANER 1
# 1
Order.no 1-999
Reference.no
Info Small, smart and low-cost accessory,cleaning the lawn mower. Simply attach at the mower deck by supple screw, without using extra tools. Attached only a standard garden hose with 1/2‘‘ thread. Then start the engine and turn on water - that‘s it! Now the mower cleans itself. Packed in a carton box.
INFO: W arning! Not suitable for electric mowers!
SMALL PARTS WASHING EQUIPMENT # 1
Order.no 99-898
2
99-908
1
Reference.no
Info Small parts washing equipment with 220 volt outlet. Power voltage to the pump motor is stepped down to 12V, thereby safe operation is possible. Pump hose with an attached brush. Sideway drain grate. Ideal for engines, crankcase, etc. Dimensions: Width 700 mm. Overall Height: 1120 mm. Working height: 820 mm. Depth: 400 mm. Replacement hose with a brush washing device for small parts. Order No. 99-898
INFO: C leaning fluid, please see: Cleaner Quale 85 (order.no. 1-063) or Clean MX14-purpose cleaner (Order.no. 12-930, 12-931, 12-933, 12-934, 12-935).
2
VE = Packning unit; Pck. = Pack; = While stocks last. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 61
25
WORKSHOP HIGH QUALITY ULTRASONIC CLEANER INFO: Stainless steel 1.4301. Overload protection. Constant performance. 2 m power cable. 3 times effect by: ultrasonic vibration, heat, chemical cleaning agent. Advantages: Removes stubborn dirt at hard-to-reach areas. Removes even tight dust particles as well as resin. Ultrasonic cleaner: Housing: drip-proof, IP 32. Time switch: 1-15 min. and continuous operation. Automatic frequency feature: 35 kHz. 230V ~ 50/60Hz or 115V ~ 50/60Hz.
Mode:*HW=Half-Wave, *DHW=Double-Half-Wave.
TYPE RK 31 H
205
100
155
Order.no 96-178 Internal tank: Capacity/Cleaning filling quantity: Heating: Transducer: Ultrasonic peak output: HF-Power/current consumption: Weight net/gross: Accessories:
175
165
TYPE RK 52 H Order.no 96-158 Internal tank: Capacity/Cleaning filling quantity: Heating: Transducer: Ultrasonic peak output: HF-Power/current consumption: Weight net/gross:
225
Accessories:
260
TYPE RK 103 H
310
Accessories:
305
150L x 140B x 100H mm 1,8 L / 1,2 L 30-80° C, 140 W, thermostatically adjustable 1 PZT-large area transducer / DHW* 240 W 60 Weff/230V-0,9A, 115V -1,8A 2,9 kg / 3,6 kg Insert basket 96-152, Lid D 52 96-171, Hole-Lid 96-165, Insert beaker 96-169, Support for injector nozzles 96-161
160 Order.no 96-160 Internal tank: Capacity/Cleaning filling quantity: Heating: Ballvalve: Transducer: Ultrasonic peak output: HF-Power/current consumption: Weight net/gross:
325
190L x 85B x 60H mm 0,9 L / 0,6 L fix at 65° C, 65 W 1 PZT-broad beam oscillating system / HW* 240 W 30 Weff / 230V-0,5A 1,9 kg / 2,4 kg Insert basket 96-180, Lid 96-179, Hole-Lid 96-181, Insert beaker 96-182
265
240L x 140B x 150H mm 4,0 L / 2,7 L 30-80° C, 200 W, thermostatically adjustable G 1/4“, right hand side 2 PZT-large area transducer / DHW* 560 W 140 Weff / 230V-1,5A, 115V -3,0A 4,6 kg / 5,2 kg Insert basket 96-164, Lid 96-157, Hole-Lid 96-166, Insert beaker 96-169, Support for injector nozzles 96-161
TYPE RK 510 H Order.no 96-150 Internal tank: Capacity/Cleaning filling quantity: Heating: Ballvalve: Transducer: Special feature: Ultrasonic peak output: HF-Power/current consumption: Weight net/gross:
300L x 240B x 150H mm 9,7 L / 6,6 L 30-80° C, 400 W, thermostatically adjustable G 1/2“, left hand side 4 PZT-broad beam oscillating system / DHW* Handles on the side 640 W 160 Weff / 230V-2,5A, 115V -4,9A 7,6 kg/9,6 kg
INFO: Mode: *HW = Half-Wave, *DHW = Double-Half-Wave
25
25 - 62
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
3
4
6
5
8 7
9 11 10
12
14 13
18
17 16 15
ACCESSORIES to High Quality Ultrasonic cleaner # 1
Order.no Reference.no Description 96-180
2
96-152
3
96-164
4
96-153
5
96-173
6 7 8 9 10 11 12 13 14 15
96-179 96-176 96-171 96-157 96-154 96-181 96-165 96-166 96-167 96-182
16
96-169
17
96-161
18
96-159
Dim. / Data LxBxH: 170x65x50 Net size 4 x 4 mm. LxBxH: 120x110x40 Insert basket of Net size 3,5 x 3,5 mm. stainless steel. LxBxH: 200x110x40 Net size 3,5 x 3,5 mm. LxBxH: 250x195x50 Net size 5 x 5 mm. Insert basket of Ø 75 mm, stainless steel. Net size 1 x 1 mm Cover of stainless steel. 2-Holes Cover with holes 1-Hole of stainless steel. 2-Holes 4-Holes Measure cup 400 ml, Ø 76 mm, of plastic. Height: 110 mm Cleaning cup 600 ml, Ø 87 mm, of stainless steel. Height: 110mm
Info
Stands for jet nozzles, of stainless steel. -
To use in the cleaning cup (order.no 96-169) for small parts cleaning. Attach in the ultrasonic tank. Suitable for different jet nozzles sizes.
For gentle cleaning of sensitive surfaces. The cleaned parts shall not be placed on the tank floor!
To cover the ultrasonic tank. Protects against liquid contamination. Condensed water is retracted into the ultrasonic tank.
For measuring tubes. Provides optimum support for objects when cleaning Fits in the DE 08 cover. For indirect cleaning of small parts. With ring and lid. To attach in to the perforated lid.
Suitable to order.no 96-178
Type K 08
96-158
K1C
96-160
K 3 CL
96-150
K 10
96-169
KD 0
96-178 96-150 96-158 96-160 96-150 96-178 96-185 96-160 96-150 96-181
D 08 D 10 T D 52 D 100 D 510 DE 08 DE 52 DE 100 DE 510 KB 04
96-165, 96-166, 96-167 96-150, 96-158, 6-160 96-150
EB 05 ED 0 ED 9
INFO: U ltrasonic cleaner: Housing: drip-proof, IP 32. Time switch: 1-15 min. and continuous operation. Automatic frequency feature: 35 kHz. 230V~50/60Hz or 115V~50/60Hz. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 63
25
WORKSHOP 1
2
3
CLEANING CONCENTRATES - for Ultrasonic Cleaner - Content 1,0 Liter
4
#
Order.no
1
For cleaning of
Typ
Info
96-156
Carburetors
2
96-155
Fuel injectors
3
96-168
4
96-174
Brass e.g. brass nozzles Light metal and all-round
Tickopur R 33 Tickopur R 13 Tickopur RW 77 Tickopur TR 3
pH 10 (1%), Universal cleaner, alkaline pH 11,9 (1%), without tensides pH 9,9 (1%) gentle alkaline pH 3,0 (1%) slightly acidic
Reference.no
Application
5%
INFO: S pecially made for cleaning in an ultrasonic bath - for optimum effect of the ultrasound. Selecting the appropriate material and scope always cleaning concentrate, which guarantees the optimum cleaning results and prevents color / and surface changes. Observe especially for light alloy.
2
4
6 7
3
1
5
HANDCLEANER and DIRT-REPELLENT PROTECTIVE SKIN CREAM # 1 2 3 4 5
Order.no 99-800 99-803 99-801 99-804 99-805
6
99-806
7
99-807
Reference.no
Info With wood flour. Alkali-free, pH neutral. For thorough, gentle cleaning of very dirty hands. With wash-active substances and precious skin care products. Powerful cleaning and cares at the same time. Optimum protection against dirt. New recipe! Silicone-free, with caring glycerin and allantoin. Apply cream before start working, at the hands and possibly arms. The skin is protected from contamination. Wash after work easily with water. For a easier mounting of the tire on the wheel rim. Can also be used for cleaning, for example: tile, stone, wood and plastic. Strong and gentle cleaning power. Removes easily, thoroughly and deeply all types of contaminants such as grease, oil, tar, etc. Solvent-free, eco-friendly, dermatological tested. Dosed as liquid soap.
Description Handwash paste Handwash cream Skin protection cream Soft soap “Liga-Gold“ BioClean MX14 Hand CleanerConcentrate.
Pack. Can Bucket Can Bucket Tube
Content 500 ml 8 kg 500 ml 9 kg 250 ml
Bucket
5 kg
Bottle
500 ml
Pack. Bales à 10 kg
Content ca. 350 piece
CLEANING CLOTHS # 1 1
25
25 - 64
Order.no 12-060
Reference.no
Description cleaning cloths, highly absorbent for the workshop area/ floor.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
3
2
4
5
1
Image only exemple!
OIL DRIP TOWELS # 1
Order.no Reference.no Packing QTY / Dim. Benefits unit pack in mm 1-485 Pck. 50 530 x Due to the very low weight and high absorption 390 reduces your costs. Capacity for 200 L. You need 260 kg of oil grain, but only 8 kg fleece.
Operating area
Color
Use a lint-free workspace. Or as a barrier Grey to stop the leak fluids. Keeps the floor clean and you get a non-slip protection for free.
INFO: I ndividually removable, longitudinally perforated endurable. Lint-free cloth, fleece 1kg takes up to 28 L Oil. 50 units = 4.5 kg. To accommodate a wide range of industrial fluids, such as: hydrocarbons, cutting oil, coolant, hydraulic oils, solvents, etc.
OIL BINDER Order.no 12-050
# 2
Reference.no
Description Penta77 bind and eliminate all types of oil, fuels and lubricants, solvents, alkalis, weak acids and liquid chemicals on solid ground. Smaller surfaces fires can be put out with Penta77. Penta77 is officially controlled and environmentally friendly.
Volume Packing 50 Liter Plastic bag
PAPER TOWEL ROLL HOLDER AND PAPER TOWEL ROLL Order.no Reference.no Packing unit 99-496 Piece 99-497 Piece 99-498 Set
# 3 4 5
QTY / pack 1 1 2
Info
Color
Towel paper stand for paper rolls up to 30 cm Ø and in width. Towel paper roll holder for wall mounting, for paper rolls up to 30 cm in Ø and width. Towel paper roll, 140m, 2-layer, 24x37 cm / sheet
White
TRASH SACK TROLLEY WITH LID 1
# 1
Order.no Reference.no Info 99-499 Trolley for 120 liter garbage bags. With plastic lid and wheels. Made of powder-paint coated Ø18mm pipe.
Color Orange
OIL CHANGES KIT 2
# 2
Order.no 171-056
Reference.no
Info 1 x Oil collecting pan, 1 x Funnel Ø 140 mm, 1 x Oil can 1.000 ml.
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 65
25
WORKSHOP
Spare parts for oil suction unit, see www.ratioparts.com
1
2
3
OIL CHANGERS # 1
Order.no 99-900
2
99-899
Reference.no
Info oil changer with 24 L capacity. As accessory includedes 2 fixed and 2 flexible suction pipes. By injecting high vacuum suction principle. Emptying of the oil container manually. As 99-900, but 80 L capacity and emptying by compressed air.
OIL COLLECTING TRAYS Order.no 96-203
# 3
Reference.no
Info Open collecting tray with splash rim, 3 carrying handles. Oil and petrol resistant polyethylene. Sump capacity: 7 L.
INFO: C apable of withstanding all types of liquids
1
5
3 4
2
COMPRESSED AIR HANDLE #
Order.no
1 2 3
88-700 88-701 88-704
Reference.no
Nozzle-Ø in mm 2 1,5
Info
Material
With short nozzle. Air inlet nipple for air coupling. With maxi-jet nozzle. Air inlet nipple for air coupling. With long nozzle -150 mm. Air inlet nipple for air coupling.
Aluminum
COMPRESSED AIR IMPACT DRIVER # 4 5
Order.no Reference.no Connection Operating torque in Nm 96-028 3/8‘‘ 7-68 96-029 1/2‘‘ 34-420
Maximum torque in Nm 102 576
No-load speed in 1/min 11.000 8.400
Weightin Total kg length in mm 1,2 146 2,33 191
Air consumption Thread Ø in l/min Size 71 106
1/4‘‘ 1/4‘‘
Sound level in dB(A) 87 93
Vibration m/s² 4,9 3,4
INFO: 3 /8‘‘ Impact Driver for tough applications. The reduction in work at the bench for assembly work, etc. Clutch hammer mechanism for smooth operation and extreme durability. Economical, efficient engine with maximum power output. Great tool for repairs on small engines and automatic transmissions as well as for bench work. Maximum torque: 102Nm. 1/2‘‘ Impact Driver for tough applications. The all-round tool for the workshop service for the garage, the tires and tractor assembly, etc. Dyna-Pact hammer mechanism, in the oil bath for smooth function and extreme durability. Four-stage power control switch in reverse, to the maximum torque. One-hand operation. exhaust air is guided by the thermal-handle, with a 360 ° air inlet. Powerful, economical model. Maximum torque 576Nm.
25
25 - 66
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
4 6
3 5
7
COMPRESSED AIR TIRE FILLER # 1
Order.no 96-001
2 3 4 5 6 7
88-763 5001-0320 5001-0315 5001-0317 5001-0316 5001-0318
Info Compressed air tire filler, range 0-4 bar, comfortable one-hand operation with 3-fold function lever. Pressure test: lever in neutral position. Release air: Lever attracted to the pressure point. Air Fill: lever pulled until it stops. Tire filler with quick connector, but with heavy duty plug lever. Range 0-10 bar, air inlet nipple for air coupling. Valve wrench to loosen the air vent. Clip-on connectors for hose vent, 4,5 x 10 mm Car-on connectors for hose vent 6,0 x 14 mm, 1/4‘‘ Gasket for Order.no 5001-0315, Ø-A = 10 mm, Ø-I = 5 mm, h = 5,5 mm Gasket for Order.no 5001-0317, Ø-A = 14 mm, Ø-I = 7,5 mm, h = 10,5 mm
Reference.no
PAINT SPRAY GUN # 1
1
1
Order.no 88-728
Reference.no
Info Paint spray gun for airspray. Nozzle set 1.5 mm. 0.5 liter cup capacity: Air inlet nipple for air coupling.
2
3
SPRAY GUNS / SANDBLASTING GUNS Order.no 88-783 88-765 88-764
# 1 2 3
Info Spray gun, straight, rigid spray tube. Length 255 mm. Made of steel. 1 L cup. Sand blasting gun for removing rust, cleaning and descaling. 4 bar air pressure. plastic screw cup 1 L. Sand blasting gun. A robust and handy unit made of die casting aluminum. For direct processing of the blasting material from sacks, barrels, buckets, etc. Hose 3 m long, with a special suction element of metal.
Reference.no
FILTER REGULATOR und LUBRICATOR 1
2
# 1
Order.no 88-734
2
88-758
Reference.no
Description Filter regulator with plastic containers, pressure gauge and manually operate the drain plug. Fine-mist lubricator with a plastic container For equipment such as air motors, valves, etc. With pneumatic oil.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Thread Size G 3/8‘‘ G 3/8‘‘
25 - 67
25
WORKSHOP COMPRESSED AIR HOSES
1
#
Order.no
1 1 1 1
88-706 88-707 88-709 88-710
Reference.no
Max working pressure in bar at 20° C 12 12 12 12
Info
Operating pressure max. in bar 12 10
Info
Length in m
PVC hose with coupler and plug-in.
10 20 10 20
Wall thickness in mm 3 3 3 3
Inside-Ø in mm 6 6 9 9
SPIRAL HOSES
1
#
Order.no
1 1
88-781 88-782
Reference.no
Length in m
Fitted with with quick coupling 7,5 plug and hose swivel. 7,5
Inside-Ø in mm 6 8
PROTECTIVE SPIRAL TUBES 1
#
Order.no
1 1 1 1
1-481 1-482 1-483 1-484
Reference.no
Length in m 20 20 20 20
Inside-Ø in mm 16 21 27 33
Winding area in mm 16-22 22-28 27-33 33-44
Hose-Ø in inch 1/4 1/2 5/8 1
Color
Black
INFO: P rotection against hose failure. Extremely resistant to abrasion. UV-resistant. Easy to install. Working temperature: From -65 ° C to +90 ° C / Short period +100 ° C. Wrap the individual tubes or isolating entire groups.
1
2
DOUBLE THREADED NIPPLE with inner cone # 1 1 1 2 2 2
Order.no 88-714 88-717 88-712 88-715 88-718 88-713
Reference.no
Description Twin nipple
Reduction nipple
Thread Size G 1/4‘‘ x G 1/4“ G 3/8‘‘ x G 3/8“ G 1/2‘‘ x G1/2“ G 1/8‘‘ x G 1/4“ G 1/4‘‘ x G 3/8“ G 3/8‘‘ x G 1/2“
Material
Brass
REDUCING ADAPTERS 1
25
25 - 68
# 1 1 1
Order.no 88-760 88-761 88-759
Reference.no
External thread-Ø G 1/4‘‘ G 3/8‘‘ G 1/2‘‘
Inside thread-Ø G 1/8“ G 1/4“ G 3/8“
Material Brass
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 2
3
4
5
6
1
THREADED AIR PRESSURE COUPLING and PUSH-ON COUPLING Order.no 88-777 88-779 88-775 88-722 88-726 88-724 88-723 88-727
# 1 1 1 2 2 2 3 3
Reference.no
Description Compressed air coupling with external thread. Push-on coupling with external thread. Push-on coupling with internal thread.
Thread Size 1/4‘‘ 3/8‘‘ 1/2‘‘ 1/4‘‘ 3/8‘‘ 1/2‘‘ -
Info
Material
Hose size 6 9 13 6 9 13
Info
Material
Hose with increased end and rib for tighter fit of the hose.
Brass
Thread Size 1/4‘‘ 1/4‘‘ 3/8‘‘ 3/8‘‘
Hose size 6 9 6 9
Compressed air coupling with spring-loaded valve. Brass Push-on coupling for compressed air.
COMPRESSED AIR COUPLING with thread hose nozzles Order.no 88-1331T 88-1334T 88-1338T 88-1301S 88-1304S 88-1308S
# 4 4 4 5 5 5
Reference.no
Description Compressed air hose coupling
Nipple with hose nozzle.
THREAD HOSE NOZZLES Order.no 88-744 88-745 88-746 88-747
# 6 6 6 6
Reference.no
Description Thread hose nozzles.
Material Brass
LUFTVERTEILER #
Order.no
1
88-756
2
88-755
Reference.no
Description
1
2
1
Dual compressed air distributor “Y-Form“. Threeway compressed air distributor “W-Form“.
Thread Size G 3/8‘‘ G 3/8‘‘
Info
Material
With compressed air coupling.
Brass
KUGELVENTILE # 1 1
Order.no 88-754 88-751
Reference.no
Thread Size 3/8‘‘ 1/2‘‘
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 69
25
WORKSHOP
1 2
BLADE BALANCERS # 1
Order.no 99-902
2
99-913
Reference.no
Info lawnmower blade balancer - „r-Matic“ for wall mounting, including adjustable teaching. High quality cast aluminum. Extra long life. Sealed bearing for precise balancing. Extremely powerful ring magnet to hold the knife on to the steel cone. Suitable for center holes from Ø 8 - 36 mm. Professional lawnmower blade balancer - „Magna-Matic“, The Original! Type: MAG-1000, for wall mounting, including adjustable teaching. Maximum precision to use quickly and easily. Mounting foot cast aluminum. Robust of stainless steel body. Immediate response to changes in weight. Extremely high durability. Sealed freewheeling bearing for precision balancing. Maintenance-free. Extremely powerful ring magnet to hold the knife on to the steel cone. Suitable for center holes from Ø 8 - 36 mm.
CONTACT SWABS 1
#
Order.no
1
7-290
Reference.no
Packing unit Pack
QTY / Info pack 10 Contact swab is ideal for cleaning oxidized and dirty contact breaker points. On one side a suede, on the other side a fine sandpaper.
CRANKSHAFT STRAIGHTENER 1
# 1
Order.no 1-850
-
1-849 1-855 1-859 1-866 1-8661 1-854 1-852 1-8521 1-8501 1-8502
Reference.no
Info Average time for a crankshaft straightning ca. 7 min. Includes sleeves: order.no: 1-855 = 22,2 mm Ø + 1-857 = 25,4 mm Ø. Improved design with replaceable threaded inserts for pressure and counter pressure screw. Sleeve for 1-850, 22 mm Sleeve for 1-850, 22,2 mm = 7/8‘‘ Sleeve for 1-850, 25 mm Screw for sleeve, M12 x 1,25 x 60 mm Screw for sleeve, M12 x 1,0 x 80 mm Pressing screw, Thread M16 x 1,5 x 50 mm Counter pressure screw, Thread M12 x 1,25 x 40 mm Counter pressure screw, Thread M12 x 1,5 x 45 mm Threaded sleeve-screw, Small Threaded sleeve-screw, Large
INFO: R eplaceable thread sleeves for pressure and counter pressure screw.
25
25 - 70
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
3
2
TOOLS for piston- / cylinder cleaning #
Order.no
1
99-023
2 3
99-0231 99-020 99-021
Reference.no
Packing unit Stück
QTY / Number of pack sanding stones 1 3
Work-Ø in mm 35 - 80
Pck.
3
-
-
1
Info High quality hone tool for cleaning and refinishing of liners and worn engine cylinders, whose pistons with new rings you want to reuse. Elimination of damage and placing of a cross cut. Easy to use with adjustable drill or cordless screwdriver. The spring allows it to adjust the pressure of “fine grinding“. Replacement hone stone for order.no 99-023 Remove or install piston rings without risk of breaking. 51 mm depth, essential for piston installation. Avoids damage to the piston rings. Replaces B&S.no 019230.
2
3
4
5
6
7
TOOLS for flywheel assembly Order.no Reference.no Replaces original order.no. 99-006 99-007 99-008 99-009 019244 99-010 019069, 019165 99-011 670103 99-012 670169
# 1 2 3 4 5 6 7
Suitable for manufacturers
BRIGGS & STRATTON
TECUMSEH
Info Flywheel Holder for 3 + 3,5 hp Flywheel Holder for 4 + 5 hp Flywheel Holder for 6, 7 + 8 hp Starter clutch puller to almost all hand-start engines Flywheel extractor for models: 130000-190000, 5-8 hp Flywheel extractor to 3,5 hp Flywheel extractor from 4 hp
TOOLS for valve seat machining 1
2
#
Order.no
1
99-013
Replaces Suitable for original manufacturers order.no. 019237, 931 BRIGGS & STRATTON and TECUMSEH
2
99-045
-
Reference.no
UNIVERSAL
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Info Valve seat cutter with 31 ° - + 46 ° - cutting heads. For most air-cooled engines. Including transport box. Very precise performance. Cutter head Ø 36 mm, Ø-guide pins: 1/4“, 9/32“, 5/16“, 11/32“, 8 mm. Valve seat cutter with 15°, -31°, -46°, -60°, cutting heads. For most air-cooled engines. ncluding transport box. Very precise performance.
25 - 71
25
WORKSHOP 1
3 4
6 5
2
PISTON STOP Order.no 179-182 179-181 179-183
# 1 2 3
Info Piston stopper made of metal is screwed into the spark plug threads. To lock the piston in the upward direction. Aas 179-182, But in nylon. Piston stopper are made of nylon, is inserted into the spark plug thread. To lock the piston in the upward direction.
Reference.no
TOOLS for valve processing / assembly # 4 5
Order.no 99-015 99-017
6
99-018
Description Valve lapping Valve spring compressor Valve spring compressor
Reference.no
Replaces original order.no. TECUMSEH: 670154, TC670154 BRIGGS & STRATTON: 19063, 019063
Info Suitable for all engines, with suction cups. By variable valves, for different conditions. As 99-017, But for two different plate sizes valves (not adjustable).
Image only exemple!
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AKKUS UND BATTERIEN Note
DIN / IEC Nr.
Info
1
Order.no Reference.no Packing QTY / ANSI unit pack .no 101-897 Pack 4 AAO
Rechargeable
HR15/51
Nickel Metall Hydrid Akku
2 3 4 5 6 7
101-895 101-893 101-892 101-891 101-890 101-894
Pack Pack Pack Pack Pack Piece
2 4 4 2 2 1
N AAA AA C D 9V
-
LR1 LR03 LR6 LR14 LR20 6LR61
8 9 10 11 12 13 14
101-8801 101-8861 101-8881 101-8961 101-8871 101-899 101-729 101-731
Pack Pack Piece Pack Pack Pack Piece Piece
2 2 1 4 2 4 1 1
N C 9V Rechargeable AAA Mono D AA
#
25
25 - 72
AAAA
3 pc. to prder. no 1-325, etc.
LR1 LR14 HHR-80AAAB HHR-3XRE A23 -
Alkali Mangan Batterie
Capacity in mAh 1100
L in mm
570 1300 3160 8100 18100 572
450 4500 Nickel200 Metallhydrid Akku 800 9000 2600 38 Duracell, 2500 Alkaline
30 60 47 44,5 60 50 28 40
Voltage in Volt 1,2
Typ
1,5 1,5 1,5 1,5 1,5 9,0
Lady Micro Mignon Baby Mono 9 Volt Block Lady Baby Block Micro Mono Mignon
1,2 1,2 8,4 1,2 1,2 1,2 12 1,5
HHR110AAO Mignon
Ultra
Ø in mm 14,5
12 10,5 14,5 25 33 10 33 10,5 33 14,5 10 7
VE = Packning unit; Pck. = Pack Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1 Image only exemple!
KNOPFZELLENBATTERIE #
Order.no
1 1 1 1 1 1 1 1 1
101-725 101-727 101-726 101-728 101-720 101-721 101-722 101-723 101-724
Reference.no
Packing unit Pack Pack Pack Pack Piece Piece Piece Piece Piece
QTY / pack 6 6 6 6 1 1 1 1 1
Description Volt PR10L PR312L PR13L PR675LH CR1616 CR2016 CR2025 CR2032 CR2430
1,4 1,4 1,4 1,4 3 3 3 3 3
Capacity in mAh 75 145 265 605 55 90 165 220 285
Height in mm 3,6 3,6 5,4 5,4 1,6 1,6 2,5 3,2 3,0
Ă˜ in mm 5,8 7,9 7,9 11,6 16,0 20,0 20,0 20,0 24,5
Weight in g 0,3 0,8 0,8 1,8 1,2 1,6 2,3 2,9 4,1
LED HAND-WORKSHOP LIGHT # 1
Order.no 1-495
1
Reference.no
Info Power input 2.5 W, 3.6 V DC, input: 100-250V AC 50/60 HZ, 28 LEDs with very high brightness. 360 ° with hanging device. NiMH rechargeable battery with 3.6 V / DC power, lasts longer than conventional NiCd batteries, low self-discharge. Removable magnet with protective rubber ring to protects sensitive surfaces. Ergonomic housing. Up to 5 hours of light capacity. Power switch.
We File It... For over 25 years! Filing is a mostly manual, less mechanized manufacturing process to work on a piece to remove material and to shape. Colloquially, is used to express that on an object (also on a human) final improvements are carried out. Filing can be used on almost all metals, wood and plastics. Source: Wikipedia
Files can be found on page 25-84.
VE = Packning unit; Pck. = Pack; = While stocks last. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 73
25
WORKSHOP
1
2
3
5
4
TASCHENLAMPEN - PELI #
Order.no
1
1-289
2
1-311
3
1-313
4
1-314
5
1-317
Reference.no
Description Info
Color
Mity Lite 2AAA
Signal Yellow / Black
BPowered by 2 AAA Energizer ® AAA batteries (included) and 90 ° cylinder diffusor for use in places difficult to access. Ultra bright, focused Xenon lamp module. Water resistant to 150 m depth. Explosion-proof ATEX CE EX II 3 GD EEx nl IIC T4. Mity Lite Powered by 2 ENERGIZER ® alkaline AA batteries (included). We recommend Magnum silicone grease for seal maintenance. Ultra bright xenon lamp module focused. 2AA Waterproof. By clip and key ring. As a lightweight helmet light suitable additive for optimal lighting. StealthLite StealthLite - Helmet Light! Powered by 4 pcs AA batteries (not included). Handy flashlight with an extremely bright, focused Xenon lamp module LaserSpotTM (~ 130 m illumination). Long-distance and shadow-free light. Water resistant to 150 m depth. Hand strap. With a large, easy-to-use switch, ideal for use as a helmet light! Explosion-proof ATEX CE II 3GD EEx nl IIC T4. Heads Up Head lamp with halogen bulb and 3 super bright LED with separate battery Lite 2640 compartment. Rugged, splash-proof ABS housing. Supplied with batteries, textile headband and rubber band. Operating time with 4 x AA cells 50h LED / Halogen 3h. Brightness: LED 9 Lumens, 0.5 Watt, 6000 cd; Halogen bulb 21 lumens, 3.48 watts, 10000 cd. Explosion protection: ATEX CE EX II 3G EEx nL IIC T3X Shown with rubber band HelmetSuitable for raptioparts order.no 1-313. mount of Full integrity of visors or facepieces. Horizontally and vertically adjustable with stainless set screw. steel
Signal Yellow
Length Weight in mm in g 117 16
145
33
Signal 165 Yellow / Black
41
Silver
-
303 (inkl. Batterien)
-
-
INFO: ISO 9001:2000 certified
25
25 - 74
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
2
BERGER - SCISSORS AND KNIVES for the workshop area # 1 2
Order.no Reference.no Replaces Verified Description original order.no 77-004 1300 GS Multi-purpose scissors 77-095 1320 Multi-purpose scissors “Bully“
Info Toothed blade With hand protection, for easy cutting of hoses, cables, etc.
1
Weight in g 210 180
ength in mm 200 1320
3
2
4
KNIFE - BLADE AND ACCESSORIES #
Order.no
1 2 3 4
24-026 24-027 24-028 24-029
Reference.no
Packing unit Piece Package Piece Package
QTY / pack 1 10 1 10
Description
Info
Knife blade - Large Spare knife blades to 24-026 Knife blade - Small Spare knife blades to 24-028
Automatic locking, including two spare knife blades. The retractable blade, including two spare knife blades. -
INFO: Read safety instructions from the manufacturer!
2
1
3
4
JIG SAW BLADES and HACKSAW BLADE with T-joining
1
Order.no Reference.no Packing QTY / Cut depth unit pack up to max. in mm 6813-0000 Pack 10 -
2 3
6814-0000 6814-0001
Pack Pack
5 5
0-60 0-60
4
6814-0002
Pack
5
0-45
#
Info
Suitable for
HSS hacksaw blade of bi-metal, coated of cobalt: 300 x 13 x 0.65 INDUSTRIAL QUALITY For fast, rough cuts in wood and plastic. CV-steel-balde. For standard cuts in hydrogenated iron, soft metals, wood and plastic. HSS bi-metal blade For fine and precision cuts in metal, plastic and nonferrous metal. High-speed steel blade.
-
VE = Packning unit; Pck. = Pack; Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
z. B. AEG, ATLAS, COPCO, BOSCH, ELU, HITACHI, HOLZ HER, MAKITA; METABO, etc.
25 - 75
25
WORKSHOP
1
2
3
5
6
4
7
GRINDING DISCS for angle grinders # 1 1 1 1 1 1
Order.no Reference.no Application Max operating speed - m/s 177-817 80 177-818 80 177-819 80 Metal universal 177-820 80 177-821 80 177-822 80
Outside-Ø in mm 115 125 180 180 230 230
Hole-Ø in mm 22 22 22 22 22 22
Thickness in mm 6 6 6 8 6 8
Info
Max, rpm
Tested Universal disc for metalmedium hardand quality Extra Class.
13300 12200 8500 8500 6600 6600
CUTTING DISCS for angle grinders and engine power cutters
25
#
Order.no
2 2
177-148 177-149
3 3 3 3 4 4 4 4 5 5 5 6 6 6 7 7
177-800 177-801 177-802 177-803 177-804 177-805 177-806 177-807 177-808 177-809 177-810 177-811 177-813 177-814 177-815 177-816
25 - 76
Reference.no
Application Max operating speed - m/s 80 Edelstahl, NE- Metalle 80 Metall universal
Stone / concrete
Steel
Asphalt Stone / concrete
80 80 80 80 80 80 80 80 80 80 80 80 100 100 80 80
Outside-Ø in mm 115 125
Hole-Ø in mm 22,00 22,00
115 125 180 230 115 125 180 230 300 300 300 300 350 350 300 300
22,00 22,00 22,00 22,00 22,00 22,00 22,00 22,00 20,00 22,00 25,40 20,00 20,00 25,40 20,00 22,00
Thickness Info in mm 1,00 High performance cutting disc for machining thin walls, pipes, 1,00 and sections. 2,50 2,50 Priced universal cutting disc for metal, extra medium hardness quality class. 3,00 3,00 2,50 Priced Universal cutting disc for mineral 2,50 materials, extra medium hardness 3,00 quality class. 3,00 3,50 Metal cutting disc, special medium 3,50 hardness quality class. 3,50 3,50 Special cutting disc, for asphalt, special 4,00 high hardness quality class. 4,00 3,50 Special disc for natural, artificial stone and concrete, high hardness quality 3,50 class
Max, rpm 13300 13300 13300 12200 8500 6600 13300 12200 8500 6600 5100 5100 5100 5100 5500 5500 5100 5100
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 1
2
3
4
5
ABRASIVE DISC for angle grinders #
Order.no
1 1 1 1 1 1
177-823 177-824 177-825 177-826 177-827 177-828
Reference.no
Application Max operating speed - m/s 80 80 80 Universal 80 80 80
Outside-Ø in mm 115 115 125 125 180 180
Hole-Ø in mm 22,00 22,00 22,00 22,00 22,00 22,00
Info
Grain size 40 60 40 60 40 60
Standard product for processing edges and welds.
Max, rpm 13300 13300 12200 12200 8500 8500
SANDING FLAP WHEEL - SMALL #
Order.no
2 2 2 2
177-142 177-143 177-144 177-145
Reference.no
Info
High-quality tools for working in metals, etc. For diverse applications.
Ø in mm 40 40 60 60
Shaft-Ø in mm 6 6 6 6
Length in mm 30 30
Ø in mm 15 45
Ø in mm 15 15 45 45
Grain size 50 80 50 80
Length in mm 2000 2000 2000 2000 2000 2000
Width in mm 75 75 75 150 150 150
Grain size 60 120 60 120
Max, rpm / min 19100 19100 12700 12700
RADICAL RUBBER DISC FOR SANDING #
Order.no
3 3
177-146 177-147
Reference.no
Info Radical rubber disc for sanding.
Shaft-Ø in mm 6 6
SANDING SLEEVE #
Order.no
4 4 4 4
177-139 177-138 177-141 177-140
Reference.no
Info
The sanding sleeve are ideal for working on metal.
SANDING BELT #
Order.no
5 5 5 5 5 5
177-152 177-154 177-155 177-153 177-150 177-151
Reference.no
Info
High tensile-resistant belt with high material removal rate, especially for combined materials. Applications are: Stainless steel, plastics and leather.
Grain size 40 60 80 40 60 80
SANDING BELT - BROWN 1
#
Order.no
1 1 1 1 1
177-156 177-157 177-158 177-159 177-160
Reference.no
Info High-quality, highly flexible rolled up universal sanding belt for processing. Ideal for machining of metals and wood.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
Length in mm 25000 25000 25000 25000 25000
Width in mm 40 40 40 40 40
Grain size 40 80 120 180 240
25 - 77
25
WORKSHOP
1 2
TYER CHANGER # 1 2
Order.no Reference.no Description 99-500 Multi-tire changer 99-806
Info Patented multi-tire changer. Tires off and on plus raise in one! Light, fast, economical. For a easier mounting of the tire on the wheel rim. Can also be used for cleaning, for example: tile, stone, wood and plastic.
Soft soap “Liga-Gold“
Application 4‘‘ to 16,5“ rims -
Pack -
content -
Bucket
5 kg
TIRE FILLER DEVICE # 1
Order.no 99-501
Reference.no
Application Tires up to size 24,5‘‘
1
Info Tire filler fill the tires, and not only makes it safe and easy but also fast and economical. It consists of a 20L approved pressure tank with safety valve and pressure gauge.
WHEEL-TIRE LEVER 1
2
#
Order.no
1
22-439
2
22-450
1
Reference.no
Info To switch tires. Suitable for your lawn tractor. A flat and a curved end. To switch tires suitable for your lawn tractor. Curved ends.
2
Length in mm ca. 227 ca. 400
3
MONTAGESTÄNDER UND -BÖCKE für Freischneider, Motorsägen u.v.m. # 1
Order.no 99-971
2 3
99-972 99-975
Reference.no
Description Deluxe Mounting arm PRS-4 Mounting arm Motor saw adapter
Info Rotated through 360 °. Bench mounting an extra thick chrome. Adjustable to two levels. Easy mounting on any flat surface (without screws). Operational as 99-971, only basic version and not chrome plated. To hold the chain saw bar connection.
INFO: Repairing made easy. Devices have safe stand and are easily accessible. Stable, high quality. Easy to use.
25
25 - 78
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP 2
Supporting pillar of special rolled profiles
1
Wheel gripper system.
Secure frame, roll-off protection.
Rear roll-off protection.
LIFTING PLATFORM for Lawn Tractors / Mowers etc. #
Order.no
1
91-220
Reference.no
Lift capacity 600
Hubhöhe Height in mm in mm 1950 50
Lifting platform for Lawn Tractors / Mowers in top class. Lift capacity up to a suitable weight of 600 kg. • Excellent ergonomics. • Excellent access for all units. • Protects your and your employees health. • Tested a million times. • Increases productivity due to higher motivation. • Varied adjustment by an extremely compact design. • Base frame (optional): foldaway even in poor soil conditions. • Accessories (optional) for pushing lawn mower or other power equipment.
Lifting time in seconds 45
Engine power in kW 3
Power in Volt / Ampere 400/16A
Design features: • Supporting columns made of special rolled steel sections. • 6-way roller guided carriage and safety nuts. • Automatic lubricator. • Contactor control. • Lockable main control switch on the steering column. • An acoustic warning (foot). • Adjusting frame with adjustable straps. • Belt drive motor with thermo protection. • Socket 230 V.
ACCESSORIES for Lifting plattform # 2
Order.no 91-224
-
91-226
-
91-225
-
91-228
Reference.no
Description Wheel gripper system Baseframe self-supporting Base plate mounting bracket. Adjustable shelf
Info Consisting of four individual wheel mounts for maximum accessibility when working around the mower blade. Mounted on the rails without tools. Is required for inadequate floor conditions when the concrete thickness is 100 mm to 140 mm. Switchable height +10 mm, minimum height +50 mm. Is required as an additional attachment of the lifting plattform, when the concrete thickness between 150 mm to 210 mm. Over 210 mm of concrete the support of this bracket is not needed. For attachment between the beams for use as an lifting platform for maintenance work / repairs of small appliances. Dimensions: 1000 x 500 mm.
INFO: W e will offer you our price offer on demand. Delivery only to D / A / B. There is no guarantee or warranty claim, if the lifting plattform is not assembled by consultations from the company!
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 79
25
WORKSHOP MOUNTING TOOL of STARTER FEATHER
1
# 1
Order.no 99-049N
Reference.no
Info Simple, harmless Winding / assembling of starter feathers. For starter rewinders in small engines such as chainsaws, trimmers, blowers and lawn mower engines from all manufacturers. Design: durable nylon. Included: wind-up in 3 different diameter. Suitable for almost all common starter feathers.
BLADE LOCKING TOOL # 1
Order.no 22-533
Reference.no
1
Info Blocking the Blade, thereby easier cleaning and repairing your lawn mower. The bracket is secured to the outer edge of the mower deck with a kind of clamp, preventing the rotation of the blade during assembly or disassembly.
REPAIRING TOOLS for propulsion chains # 1 2
1
Order.no 22-534 22-536
Reference.no
Description Chain equipment Installation Help
Info Suitable for chain pitches from 3/8'' to 5/8 ". Optimal during the installation of your drive chain. Adds both ends of the roller chain together.
2
PRESSURE SEALED BAG #
1
1 1 1 1
Order.no Reference.no Packing unit Pack 24-020 Pack 24-021 Pack 24-022 Pack 24-024
QTY / Info pack 100 100 Pressure seal bag for safe storage of 100 various small items perfectly suited. 100
Height x Width in mm 100 x 150 120 x 170 150 x 220 380 x 500
ATTACHMENTS STRAPS - “WRITEABLE“ 1
# 1
2
2
Order.no Reference.no Packing QTY / Description / Info unit pack 2-750 Pack 500 Attachments straps “yellow“. Rolls of 500 pieces. For attachment to devices that can be labeled with a permanent marker. Water resistant. 2-749 Pack 500 Like 2-750, but coated paper.
STORAGE BOXES of Wellpappe 1
# 1 1
25
25 - 80
Order.no Reference.no Packing unit 999-561 Pack 999-562 Pack
QTY / pack 10 10
Length in mm 600 284
Width in mm 320 146
Height Info in mm 200 Foldable, can be labeled. Of stable corrugated wellpapp. 107
VE = Packning unit; Pck. = Pack; = While stocks last. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
2 4
3
REPAIR-INSPECTION PROTOCOL for electrical devices according to VDE guidelines # 1
Order.no 1-827
Reference.no
Info In revised form, according to the latest VDE guidelines. Universal use, the actual calculation of these values are specified measurement, set values over and make an immediate good-bad evaluation. 2-way protocol breakdown as a workshop + customer receipt. 25 units per block. Protocol for measurements according to DIN VDE 0701, 0702. Reviewed by the professional association.
REPAIR CHECK-LISTS and TAG STRAPS #
Order.no
2 3
1-842 1-863
Reference.no
QTY / Info pack 1 Continuously numbered, with pick-up card for the customer, 200 units per block. 500 Plastic straps, as for example, to be used in clothing sector for price tags. To open after with scissors after been plugged together.
Packing unit Piece Pack
Dim. in mm 210 x 100 ca. 200 pc.
UNIVERSAL HANGING - PLASTIC with euro hole and tape #
Order.no
4
1-030
Reference.no
QTY / pack 10
Info With euro hole punched. Simply remove the protective foil adhesive surface, hanger can be used immediately. Usable on both sides.
2
1
3
SERVICE BOOK and SERVICE LABELS #
Order.no
1 2 3
24-151 24-163 24-164
Reference.no
Packing unit Pack Pack Pack
QTY / pack
Info
25 250 250
ratioparts service-book, for type in customer data and 8 service checks. maintenance sticker - rp inspection sticker - rp
VE = Packning unit; Pck. = Pack; = While stocks last. Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 81
25
WORKSHOP
2
1
3
The delivery of Jolly devices: 1pc wrench, 1pc stencil, 1pc whetstone.
CHAIN SHARPENERS # 1
Order.no 171-031
2
171-130
3
171-108
Reference.no
Info ‘‘Super-Jolly‘‘ Professional unit, New, improved version! 230V, 50Hz, 214W. With undervoltage releases, i.e. at power loss, and no automatic restart of the machine. Maximum Speed 3.400 rpm. Lamp included -15 W. For chain types: 1/4“-.325“-3/8“-.404“-1/2“. With automatic chain tensioner, through exclusive, hydraulic clamping system. Incl. 3 Grinding wheels, Order No. 171-125, 171-126, 171-127. ‘‘Midi-Jolly“, small workshop unit, 230V, 50Hz, 85W. Easy to handle. Maximum Speed 5.000 rpm. For chain types: 1/4“-.325“-3/8“-.404“. Inkl. 1 Grinding wheel, Art.-Nr.: 171-151. ‘‘Sharp Boy‘‘ Compact, reliable and cheap. Fast and easy to use. Complies with safety regulations. Clamping vise for the chain in a easily visible position to the chain of control. Suitable for all types of chains. Plastic housing. Incl. 1 grinding disc (Out-Ø 105 mm, In-Ø 22.2 mm). Suitable replacement discs: order.no: 171-151 or 172-151.
CHAIN SHARPENERS “JOLLY STAR“ 4
Fig.
Order.no
4
171-155
1.
Reference.no
Info 230V, 50Hz, 280W. Maximum Speed 2.800 rpm. For chain types: 1/4“-.325“-3/8“-.404“-1/2“. Inkl. 3 Grinding discs, order.no: 171-125, 171-126, 171-127.
3.
2.
1. Chain tensioner, self-centering, improved centering of two wheels. 2. Vise locking handle - by pushing the red button the handle will be released and is movable, chain remains fixed. Also for left-handed users.
1
2
4 5
25
25 - 82
6
3. Safety feature: double coil spring. 4. Head-safety button: As soon as the head is in upper position the locking knob arrests = guarantees always a solid head-support (can be released by pushing the button), safety even in case of bracing on the device.
JOLLY AND OREGON SPARE PARTS
3
7
#
Order.no
1 2 3 4 5 6 7
200-907 200-999 200-908 200-919 200-913 200-998 200-990
Reference.no
4.
Replaces original order.no 1005262, G059 1135010, 1135169, G060 1005263 1005040, G088 1135060, G073 1135057, G042 1185009, 1185123
All “Jolly“ spare parts available!
Description Spring Bumper spikes Locking nut Sharpening stone Eccentric shaft new recoil spring - Jollys Spring for Mini / Midi Jolly
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP
1
2
3
Weiche Ausführung = besseres Schliffbild.
Harte Ausführung = höhere Standzeit.
4
Weiche Ausführung = besseres Schliffbild.
5
Spezial Ausführung
6
Harte Ausführung = höhere Standzeit.
Harte Ausführung = höhere Standzeit.
SCHLEIFSCHEIBEN für Kettenschärfgeräte #
Order.no
1 2 1 2 1 2 1 2 3 2 3 2 4
171-131 172-131 171-133 172-133 171-151 172-151 171-152 172-152 171-135 172-135 171-136 172-136 171-150
4
171-149
4
171-1491
1 2 1 5
171-139 172-139 171-140 172-140
1 6 1 5 1 5
171-125 172-125 171-126 172-126 171-127 172-127
Reference.no
Suitable for manufacturer
MINI JOLLY “ALT“, OREGON MIDI-JOLLY, MINI JOLLY “NEU“, OREGON EFCO “ALT“, JOLLY, OREGON NACHBAUTEIL p. f. STIHL USG JOLLY , OREGON NACHBAUTEIL passend für STIHL NACHBAUTEIL passend für STIHL USG NACHBAUTEIL passend für STIHL USG JOLLY, JOLLY STAR, SUPER JOLLY, EFCO “NEU“, OREGON, MAXX
Color
Outside-Ø in mm
Inside-Ø in mm
For chain type
16 16 16 16 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 12,1
Thickness in mm 3,2 3,2 4,7 4,7 3,2 3,2 4,7 4,7 3,0 3,0 4,5 4,5 4,0
Max. Rotation speed (m/s)
Hard metal chain
Maximum Speed rpm. 7640 12030 7640 12030 7640 7270 7640 7270 7630 6210 6210 6210 -
pink green pink green pink green pink green black green black green silver
100 100 100 100 105 105 105 105 123 123 123 123 145
silver
145
22
4,0
Hard metal chain
-
-
145
22
3,2
145 145 145 145
12,1 12,1 12,1 12,1
3,2 3,2 4,5 4,5
Hard metal chain 3/8‘‘ Hobby 1/4‘‘ / 3/8 Hobby / 0325 1/4‘‘ / 3/8 Hobby / 0325 3/8‘‘ Profi / 0,404“ 3/8‘‘ Profi / 0,404“
pink green pink green
5090 5260 5090 5260
40 40 40 40
pink green pink green pink green
145 145 145 145 145 145
22,2 22,2 22,2 22,2 22,2 22,2
3,0 3,0 4,5 4,5 7,0 7,0
1/4‘‘ / 3/8“ Hobby / 0,325“ 1/4‘‘ / 3/8“ Hobby / 0,325“ 3/8‘‘ Profi / 0,404“ 3/8‘‘ Profi / 0,404“ Depth limiter Depth limiter
5090 5260 7630 5260 5090 5260
40 40 40 40 40 40
1/4‘‘ / 3/8“ Hobby / 0,325“ 3/8‘‘ Profi / 0,404“ 1/4‘‘ / 3/8“ Hobby / 0,325“ 3/8‘‘ Profi / 0,404“ 1/4‘‘ / 3/8“ Hobby / 0,325“ 3/8‘‘ Profi / 0,404“
63 63 63 63 40 40 40 40 40 40 40 40 -
INFO: T he pictures and actual color of the disk may be delivered in different colors if necessary.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
25 - 83
25
WORKSHOP 5
2
1
8
3
4 6
Professional, rapid riveting
7
REPAIRING TOOLS FOR CHAINS # 1 2 3 4 5 6 7 8
Order.no 171-008 171-009 171-109 171-110 171-100 171-101 171-102 170-219
Reference.no
Info Complete chain breaker, robust and easy to use. Hardened replacement punch for 171-008. Replacement anvil for 171-008 Anvil with grooves for different chain sizes. for 171-008. Complete rivet spinner for bench mounting. Professional use. Incl. 1 pc 171-102. Replacement spinner head 1/4‘‘, 3/8“ Hobby and 325“, for 171-100. Replacement spinner head 3/8‘‘ Profi and 404“, for 171-100. Professional, electrical chain riveting. 230V, 50Hz, 85W, speed = 160 rpm. The reduced speed prevents overheating of the workpiece during riveting. For riveting of 1/4“, 3/8“, 0.325“ and 0.404“ Chainsaw.
CHAIN IDENTIFICATION TABLES 1
# 1
Order.no 171-106
2
171-007
Reference.no
Info Table template to stick on the bench. Precise identification of the chain pitch and the number of drive links. Easy and fast length determination for the following types: For Chain pitch .404‘‘ 29-97 drive links, the chain pitch 3/8“ from 32 to107 drive links, the chain pitch 0.325“ from 36 to 120 drive links, the chain pitch 1/4“ from 47 to 155 drive links. Chain identification table.
INFO: F ig. 1 is required for determine the length. For the “zero point determination“ chain e.g. 50 drive links determine to length. Last, right TG on the “50“ mark of the respective chain pitch set. Pull chain tight and attach to the last left a mark on the TG workbench (eg hit a nail with a small head on the bench). The calculated “zero point“ applies to all types of chains.
2
CHAINSAW-RUND FILES
1
#
Order.no
1 1 1 1 1 1
183-010 183-001 183-002 183-003 183-200 183-004
Reference.no
Pack of 3 QTY / pack 3 3 3 3 3 3
File-Ø in mm 3,6 4,0 4,5 4,8 5,2 5,5
QTY / pack 12 12 12 12 12 12
File-Ø in mm 3,6 4,0 4,5 4,8 5,2 5,5
CHAINSAW-RUND FILES
1
25
25 - 84
#
Order.no
1 1 1 1 1 1
181-010 181-001 181-002 181-003 181-200 181-004
Reference.no
Info 1/4‘‘ and 3/8“ Hobby 1/4‘‘ and 3/8“ Hobby 0,325‘‘ VM 0,325‘‘ HM and 3/8“ Profi 3/8‘‘ Profi 3/8‘‘ Profi and 0,404“
Pack of 12 Info 1/4‘‘ and 3/8“ Hobby 1/4‘‘ and 3/8“ Hobby 0,325‘‘ VM 0,325‘‘ HM and 3/8“ Profi 3/8‘‘ Profi 3/8‘‘ Profi and 0,404“
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
WORKSHOP CHAINSAW-RUND FILES - VALLORBE - Pack of 3 1
#
Order.no
1 1 1 1 1 1
183-020 183-021 183-022 183-023 183-201 183-024
Reference.no
QTY / pack 3 3 3 3 3 3
File-Ø in mm 3,6 4,0 4,5 4,8 5,2 5,5
Info 1/4‘‘ and 3/8“ Hobby 1/4‘‘ and 3/8“ Hobby 0,325‘‘ VM 0,325‘‘ HM and 3/8“ Profi 3/8‘‘ Profi and 0,404“ 3/8‘‘ Profi and 0,404“
CHAINSAW-RUND FILES - VALLORBE - Pack of 12 1
#
Order.no
1 1 1 1 1 1
181-020 181-021 181-022 181-023 181-199 181-024
Reference.no
QTY / pack 12 12 12 12 12 12
File-Ø in mm 3,6 4,0 4,5 4,8 5,2 5,5
Info 1/4‘‘ and 3/8“ Hobby 1/4‘‘ and 3/8“ Hobby 0,325‘‘ VM 0,325‘‘ HM and 3/8“ Profi 3/8‘‘ Profi and 0,404“ 3/8‘‘ Profi and 0,404“
SPECIAL-CHAINSAW- FLAT FILE - for depth control 1
# 1 2
2
1
Order.no 181-005 181-005P 810-002
2
Reference.no
description For all chain types. For all chain types. For all chain types, inkl. wooden handle.
3
Info Blister pack. Blister pack.
4 5
FILE HANDLE # 1 2 3 4 5
Order.no 181-006 181-007 181-008 181-209 171-093
Reference.no
Length in mm 85 94,4 120 121 103,3
Ø in mm 24 27,6 28 29,8
Width in mm 23 -
Info For File Ø: 4 mm. For File Ø: 4,8 - 5,2 - 5,5 mm. For all sizes. Wooden handle for round files: 4,5 - 4,8 - 5,2 - 5,5 mm and flat file. For all round files with 4-square-shaft.
FILE HANDLE - with angle gauge 1
2
#
Order.no
1 2 1 2 1 2 1 2
200-949 200-949P 200-948 200-948P 200-935 200-935P 200-947 200-947P
Reference.no
Info 1/4‘‘ and 3/8“ Hobby. 1/4‘‘ and 3/8“ Hobby. 0,325‘‘ VM-flat profile. 0,325‘‘ VM-flat profile. 0,325‘‘ HM. 0,325‘‘ HM. 3/8‘‘ Profi and 0,404“. 3/8‘‘ Profi and 0,404“.
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
File-Ø in mm 4,0 4,0 4,5 4,5 4,8 4,8 5,5 5,5
Info 2
Order.no with appindex “P“ comes in blister pack.
25 - 85
25
WORKSHOP
1
VALLORBE SHARPENING SETS in Roll-up-poch #
Order.no
1 1 1 1 1 1 1 1 1 1
183-025 183-026 183-027 183-028 183-029 183-030 183-031 183-032 183-033 183-034
Reference.no
Content Combination tool: Dimensions mm: A = 13, B = 19, D = 50, 4 x Round files, Wooden File Handle, Plastic File Handle, Grinding angle: 25° and 30° screw driver, depth gauge: (0,63 mm und 0,73 mm), Bar groove cleaner, Flat file. Combination tool: Dimensions mm: A = 13, B = 19, D = 25, 4 x Round files, Wooden File Handle, Plastic File Handle, Grinding angle: 25° and 30° screw driver, depth gauge: (0,63 mm und 0,73 mm), Bar groove cleaner, Flat file.
File-Ø in mm 4,0 4,5 4,8 5,2 5,5 4,0 4,5 4,8 5,2 5,5
Suitable for manufacturer
Special feature
ECHO, OLEO MAC, PARTNER, All tools always at PIONEER, SOLO, hand. Always properly STIHL … cin order. Space-saving, easy to carry. Tools in place DOLMAR, and no tool are lost. HUSQVARNA, JONSERED …
2
1
3
SHARPENER - “Precision“ # 1 2 3
Order.no 171-020 171-044 171-023
1
Reference.no
Info Professional rapid sharpening, best and easy way to use for round files and flat files (no files included). Sharpening with magnetic clamp grid. Filing vise. - Vise’s forks drive into e.g. a stump
SHARPENING SET #
Order.no
1 1 1 1
171-046 171-048 171-050 171-047
Reference.no
Content 1 of each: file holder, wooden file handle, round file, flat file, depth limiter gauge and bar groove cleaner.
File-Ø in mm 4,0 4,5 4,8 5,5
Info 1/4‘‘ and 3/8“ Hobby 0,325‘‘ VM-Flat profile. 0,325‘‘ HM 3/8‘‘, 0,404“ Profi
BAR GROOVE CLEANERS AND DEPTH GAUGES 1
25
25 - 86
# 1 1 1
Order.no 171-012 171-013 171-010
Reference.no
Info Depth gauge 0,325‘‘ und 3/8“ P Depth gauge 0,404‘‘. Bar groove cleaner.
member of ratioparts group
Original references are provided only for purposes of comparison. We do not supply original parts, unless otherwise stated.
INFO: H igh-quality bag made of nylon fabric - extremely durable - with all the tools for adjusting the engine to maintain the chain guide and chain sharpening.