922-072
Nortel
BCM50 Rls. 3.0, BCM200/400 Rls. 4.0 & BCM450 Rls. 1.0 Installation, Configuration & Maintenance Click the link below to buy full version as Low as $25 http://www.examkill.com/922-072.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 You have installed a DSM32+ MBM in slot 1 of a new BCM450 main unit and you want to connect a set and perform set-based programming. What is the next step? A. Identify the module. B. Deconfigure the module. C. Configure the module. D. Connect a set to the DSM32+.
Answer: D
Question: 2 Click on the Exhibit button. While configuring a DTM module on a BCM450, the module was mistakenly identified as a DTMPRI instead of a DTM-T1. What must you do to correct the module identification? A. Select the row of the DTM you configured. Click the Configure button and enter TM-T1?as the module type. B. Select the row of the DTM you configured. Click the Deconfigure button. Click OK. Double-click the ?onfigured Device?column and select ?TM-T1?as the module type. C. Select the row of the DTM you configured. Double-click the ?onfigured Device?column and select ? D. Select the row of the DTM you configured. Click the Disable button. Click OK. E. Select the row of the DTM you configured. Click the Configure button and enter DTM-T1 as the module type. F. Select the row of the DTM you configured. Click theDeconfigure button. Click OK. Double-click the Configured Device column and select DTM-T1 as the module type. G. Select the row of the DTM you configured. Double-click theonfigured Device column and select DTM-T1 as the module type. H. Select the row of the DTM you configured. Click the Disable button. Click OK. Double-click the Configured Device column and select DTM-T1 as the module type.
Answer: B
http://www.examkill.com/922-072.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 3 Which Media Bay Module (MBM) can be combined with the G4x16 on the same DS30 bus on a BCM200/400 system? A. DTM B. GATM4 C. GASM8 D. BRI S/T
Answer: B Question: 4 You need to renumber a group of DNs. You also want to move the voice mailboxes with the renumbered DNs. Which BCM system allows you to do this?
A. The system will configure the IP trunks with a low line number of 001 and a high line number of 32. B. The system will configure the IP trunks with a low line number of 001 and a high line number of 40. C. An error message is displayed since a BCM450 without a CEC can only support eight VoIP trunks. D. An error message is displayed indicating your license is not sufficient to configure 40 VoIP trunks.
Answer: B
http://www.examkill.com/922-072.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 6 You want to install a Digital Trunk Module (DTM) in the BCM450 main unit. How must you set the DIP switches on the DTM? A. Set all of the DIP switches to OFF. B. Set all of the DIP switches to ON. C. Set the first DIP switch to ON and set the rest to OFF. D. Set the first DIP switch to OFF and set the rest to ON.
Answer: B Question: 7 You are creating a set template based on a DN. You clicked the Add button on the Set Templates screen. What must the value in the Source Template field be? A. DN B. DID C. PBX D. None
Answer: D
http://www.examkill.com/922-072.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 8 Click on the Exhibit button.
You are configuring a GATM4 on a BCM450. What is the start line number the system will suggest? A. 001 B. 002 C. 011 D. 021 E. 061
Answer: D Question: 9 Which statement about the BCM450 capacity expansion card (CEC) is true? A. A BCM450 with a CEC can support a maximum of 300 trunks. B. You can remove the CEC if the customer capacity needs drop. C. A BCM450 with a CEC can support a maximum of 130 stations. D. The CEC is a standard card that comes installed with every BCM450.
Answer: B
http://www.examkill.com/922-072.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Question: 10 What is the maximum number of IP trunks you can have on a BCM450 with a capacity expansion card? A. 48 B. 80 C. 130 D. 300
Answer: C
http://www.examkill.com/922-072.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6
Nortel
922-072
BCM50 Rls. 3.0, BCM200/400 Rls. 4.0 & BCM450 Rls. 1.0 Installation, Configuration & Maintenance
Click the link below to buy full version as Low as $25
http://www.examkill.com/922-072.html
We also provide PDF Training Material for: Hot Exam 920-159
920-196
922-040
920-174
920-173
920-254
920-226
920-362
920-192
920-482
922-108
922-110
920-241
920-341
920-178
920-177
920-331
920-110
920-176
920-129
920-136
920-107
920-159
920-808
920-174
920-177
920-174
920-338
http://www.examkill.com/922-072.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
7