Nortel
920-160
Nncss-communication server(cs)1000 Rls.4.0 Hardware I and M Click the link below to buy full version as Low as $25 http://www.examkill.com/920-160.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 A thermostat in a column an CS 1000 Rls. 4.0 system is reporting excessive temperatures. If this condition persists, what action will the system software take with regards to power? A. it will shut down power to that particular column. B. The system software detects a power alarm C. No action will be takes; the column will continue to operate normally. D. The column will continue to run partially, while switching some resources to another Power source.
Answer: B Question: 2 You have an attendant console on a CS 1000 Rls. 4.0 system that is unable to make or receive calls. How could you rule out a defective attendant console? A. Replace the associated EP card. B. Initiate a LD 30 command to test network loops. C. Initiate a LD 31command to test set and consoles. D. Initiate a LD 31command to test peripheral controllers.
Answer: C Question: 3 On a CS 1000M Rls. 4.0 system, you notice the red LED atop a column is constantly lit. What is one way to determine the problem? A. Press the manual initialize button on the call processor. B. Visually check the switch setting on the call processors. C. Check for any minor alarms displayed on the attendant consoles. D. Perform the commend STAT XSM in overlay 37.
Answer: D
http://www.examkill.com/920-160.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 4 A CS 1000 Rls. 4.0 system is supporting serial-port access. These ports have been operating correctly over extended period. Which action will the system software take if excessive interference now detected on the TTY port? A. it will issue a system message to check the port B. it will buffer the incoming data from the port for up to 30 minutes. C. It will disable the port and will require intervention ro re-enable the port. D. It will lock the port temporarily and automatically re-enable the port after a short time.
Answer: D Question: 5 On a CS 1000M Rls. 4.0 system. You notice that red inactive NT6D65 Core to network Interface (cCNI0 card are constantly it. What does that indicate about the hardware status of that card and what if any action should be taken? A. The card is inactive. B. That the card is unequipped. C. The card should be reseated. D. That the card is faulty and should be replaced.
Answer: A Question: 6 A thermostat in a column on a CS 1000 Rls. 4.0 system is reporting excessive temperatures. Which action will the system monitor (STAT XSIM) take? A. The system software will generate a minor alarm. B. No action will be takes; the column will continue to operate normally. C. If the condition is constant, it will shut down power to that particular column. D. The column will continue to run partially, while switching some resources to another column.
Answer: C
http://www.examkill.com/920-160.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 7 During testing of a particular trunk, you cannot make or receive calls and receiving an overload system (OVO) message. The message indicates that only the TN for this trunk is disabled. What is a possible cause for this problem? A. There is a defective trunk card B. There is a defective CPU interface C. There is excessive traffic in the system D. The fiber Super loop network card is defectivee
Answer: A Question: 8 You are installing a Candeo DC power system on a CS 1000M Rls. 40 system. How is the safety/ground protective earth wire connected in multiple-column system? A. Run a #8 AWG wire from the ground source to each column individually. B. Connect a #6 AWG wire from the ground source in the service panel to a ground lug on the pedestal. C. Connect a #6 AWG wire from the ground source in the service panel to a ground lug on the closest column. Daisy-chain the #8 AWG ground wires from one pedestal to the connecting all of the columns together. D. Connect a #6 AWG wire from the Logic Return Equalizer to a ground lug on the closest column. Daisy chain the #8 AWG ground wires from one pedestal to the connecting all of the columns together.
Answer: D Question: 9 According to grounding procedures for a CS 1000E Rls. 4.0 system, if the Signaling Server is connected to the rack AC outlet, what must be taken into consideration for proper grounding? A. The Signaling Server must also be connected to the ground bar. B. The rack's AC outlet must be grounded to a dedicated electrical panel. C. Whether this is a chassis or cabinet system, which determines the grounding method. D. That NO other grounding is required; the rack AC outlet provides grounding from other rack mounted equipment.
Answer: B http://www.examkill.com/920-160.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 10 After installing the grounding back according to the grounding cabinets of procedure, which task must be performed before power is applied? A. Test the ground B. Connect the power card and power up C. Turn on the circuit breaker to reserve power (battery backup). D. Place a DO NOT DISCONNECT tag on the ground wire at the ground wire at the service panel.
Answer: A
http://www.examkill.com/920-160.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Nortel
920-160
Nncss-communication server(cs)1000 Rls.4.0 Hardware I and M
Click the link below to buy full version as Low as $25
http://www.examkill.com/920-160.html
We also provide PDF Training Material for: Hot Exam 920-159
920-196
922-040
920-174
920-173
920-254
920-226
920-362
920-192
920-482
922-108
922-110
920-241
920-341
920-178
920-177
920-331
920-110
920-176
920-129
920-136
920-107
920-159
920-808
920-174
920-177
920-174
920-338
http://www.examkill.com/920-160.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6