HP
HP3-024
HP Color LaserJet 4700 series Click the link below to buy full version as Low as $25 http://www.examkill.com/HP3-024.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 The HP Color LaserJet 4700 automatically calibrates and cleans at certain times to maintain optimum print quality. Which of the following conditions cause the device to perform a color-plane registration (CPR)? Select THREE. A. one or more print cartridges are installed that have not previously been installed in the printing device B. 10,000 pages have printed since the last calibration C. 'Full Calibrate Now' is requested through the control panel D. the ETB is replaced
Answer: A, C, D Question: 2 Before performing an engine test on the HP Color LaserJet 4700ph+,________. A. the printing device must be powered off B. the printing device must be power-cycled C. the output device connection cable must be detached from the printing device D. the output device and output accessory bridge must be removed
Answer: B Question: 3 Automatic calibration occurs for which events? Select THREE. A. whenever the device comes out of power save mode B. when the printer is powered on after having been powered down for longer than 20 seconds C. whenever a brand new print cartridge is installed in the printer D. when 1,000 pages have printed since the last calibration
Answer: B, C, D
http://www.examkill.com/HP3-024.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 4 For what reason should you disassemble and then replace the paper feed assembly? A. if repeated paper jams occur due to excessive paper skew B. if replacing feed rollers and adjusting paper skew sensors do not solve repeated jam errors C. if the media sensor value no longer matches the value on the label located on the paper feed assembly D. the paper feed assembly can be replaced as a full unit but should never be disassembled
Answer: D Question: 5 The HP Color LaserJet 4700 printer series uses the SCIP packaging approach. What does SCIP stand for? A. ship Cartridges Inside Printer B. Standard Copier Internal Packaging C. Secure Color Internal Parcel D. Setup Cartridge for Initial Placement
Answer: A Question: 6 According to the Service Manual, after the main drive assembly gears are aligned, how should the cartridge interlock rod be positioned? A. up B. down C. center D. positioning does not matter
Answer: A
http://www.examkill.com/HP3-024.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 7 Where should the metal support bracket be placed while removing the laser scanner assembly? A. the metal support bracket should not be removed from its original position B. at the bottom of the printing device so the device frame does not become twisted C. at the top of the printing device to help secure the laser scanner assembly as the screws are being removed D. at the base of the laser scanner holder so the laser scanner assembly can slide out of the printing device smoothly
Answer: B Question: 8 What must you do before performing an engine test on the HP Color LaserJet 4700ph+?
A. Tray 1 must be loaded with paper. B. The duplexer must be removed. C. The output device connection cable must be detached from the printing device. D. The stapler/stacker accessory must be removed.
Answer: D Question: 9 Which is the correct first troubleshooting action to take to solve a partial missing color plane print defect? A. correct the image transfer kit timing application B. correct the timing of the intermediate transfer belt (ITB) alienation system C. reinstall the main drive assembly D. correct the timing of the developer alienation system
Answer: D
http://www.examkill.com/HP3-024.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 10 You have replaced the formatter and transferred the compact flash firmware card from the old formatter to the newly installed formatter. Then, you power on the printing device. What do you do after powering up the printing device to a "Ready" prompt? A. Wait for all three lights below the control panel to flash 5 times. B. Wait five minutes before using the printing device so the printer configuration information can be restored from the compact flash memory to the NVRAM. C. Immediately power cycle the printing device again to make sure the printer configuration was restored from the compact flash memory to the NVRAM. D. Immediately print Diagnostics Page, check the media sensor calibration values and reenter through the control panel Service menu, if necessary.
Answer: B
http://www.examkill.com/HP3-024.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
HP
HP3-024
HP Color LaserJet 4700 series Click the link below to buy full version as Low as $25
http://www.examkill.com/HP3-024.html
We also provide PDF Training Material for: Hot Exam HP2-K25
HP2-E50
HP3-X12
HP2-K28
HP2-N26
HP3-X05
HP2-B65
HP2-B48
HP3-X10
HP2-E23
HP3-E37
HP2-E35
HP2-E43
HP0-M52
HP2-E40
HP3-C02
HP2-P21
HP2-E48
HP2-E42
HP0-M55
HP2-E49
HP2-H19
HP0-M51
HP3-L07
HP2-E46
HP2-E47
HP3-C30
HP3-C32
http://www.examkill.com/HP3-024.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6