922-097
Nortel
Nortel Communication Server 1000 System Upgrades to Rls. 5.0 for Technicians Click the link below to buy full version as Low as $25 http://www.examkill.com/922-097.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0 Standard Availability. A CP-PM Call Server card is being installed during the upgrade. The CP-PM Call Server card has been installed into Slot 1 and configured. What is the next sequential step in the upgrade process? A. Reboot the card to begin the software installation. B. Connect the administration console to Port 0 of the NTAK19EC SDI cable. C. Insert the RMD containing theRls. 4.5 customer database into the faceplate of the CP-PM Call Server card. D. Insert the bootable RMD containing software installation files into the faceplate of the CP-PM Call Server card.
Answer: B Question: 2 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0 with a single IP Media Gateway 1000E chassis. In this configuration, which slot in the IP Media Gateway houses the Media Gateway Controller Card? A. Slot 0 B. Slot 1 C. Slot 2 D. Slot 3
Answer: A
http://www.examkill.com/922-097.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 3 A customer with a Communication Server (CS) 1000E at Rls. 4.5 with an Media Gateway (MG) 1000T containing three chassis is planning to migrate the functionality of the MG 1000T into the CS 1000E High Availability system, and then upgrade the system to Rls. 5.0. The system Signaling Servers are Nortel ISP 1100 servers. What must be done to the Signaling Server to complete the upgrade? A. Upgrade the server software to Rls. 5.0 only. B. Replace thehardware to CP-PM Signaling Server. C. No action is required; the Signaling Server can remain atRls. 4.5. D. Upgrade the memory to 1 GB followed by a software upgrade toRls. 5.0.
Answer: D Question: 4 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. Which components must be replaced in the MG 1000S to complete the upgrade? A. SSC Card B. Call Server C. Voice Gateway Media Card D. Nortel IPS 1100 Signaling Server
Answer: A Question: 5 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0. A CP-PM Call Server card is being installed during the upgrade. Which statements correctly describe the software installation process? (Choose two.) A. Rls. 5.0 software does not need to be installed on the CP-PM Call Server. B. The Software Install tool is launched on the first boot of the CP-PM Call Server. C. Rls. 5.0 software must be loaded onto the CP-PM Call Server using a bootable RMD. D. A bootable RMD must be created containing theRls. 5.0 software and operating system.
Answer: C,D http://www.examkill.com/922-097.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 6 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0. Standard Availability system with two IP Media Gateways. During the upgrade, the system automatically maps small system Terminal Numbers to large system Terminal format. Which action must be completed manually? A. Re-program Tone Receiver Terminal Numbers B. Re-program Trunk Terminal Numbers with new format C. Re-program IP Phone Terminal Numbers with new format D. Change the format on the Element Manager IP Telephony Node files
Answer: D Question: 7 A customer with a Communication Server (CS) 1000E at Rls. 4.5 with an Media Gateway (MG) 1000T is planning to migrate the functionality of the MG 1000T into the CS 1000E High Availability system, and then upgrade the system to Rls. 5.0. The upgraded system will have two IP Media Gateways. Which statement is true regarding DSP resources for the IP Media Gateways in the upgraded system? A. DSP resources are no longer required for inter-IPMG call. B. DSP resources are no longer required for TDM to IP calls. C. DSP resources are localized to a particular IPMG where the DSP resource is located. D. DSP resources are considered system resources and are not localized to a particular chassis.
Answer: C Question: 8 A customer with a Communication Server (CS) 1000E at Rls. 4.5 with an Media Gateway (MG) 1000T is planning to migrate the functionality of the MG 1000T into the CS 1000E High Availability system, and then upgrade the system to Rls. 5.0. The upgraded system will have two IP Media Gateways. Which statement is true for this type of upgrade? A. The IPMG type remains SSC. B. The IPMG does not require an IP address. C. The IP address for each IPMG is automatically configured. D. The IP address for each IPMG must be configured in LD 97.
Answer: D http://www.examkill.com/922-097.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 9 A customer is upgrading an existing Communication Server (CS) 1000S at Rls. 4.5 to a CS 1000E Rls. 5.0 Standard Availability. A CP-PM Signaling Server card is being installed during the upgrade. Which two statements correctly describes the software installation process? (Choose two.) A. Rls. 5.0 software does not need to be installed on the CP-PM Signaling Server. B. The Software Install tool is launched on the first boot of the CP-PM Signaling Server. C. A bootable RMD must be created containing theRls. 5.0 software and operating system. D. Rls. 5.0 software must be loaded onto the CP-PM Signaling Server using a bootable RMD.
Answer: A,B Question: 10 A customer is upgrading a Communication Server (CS) 1000E at Rls. 4.5 to a Communication Server (CS) 1000E Rls. 5.0 system. The customer has decided to replace an existing Nortel ISP 1100 Signaling Server with a CP-PM Signaling Server. The NRS database has already been backed up. What is the next step in the upgrade process? A. The ISP 1100 tools menu is used to back-up the IP data files to a CD. B. Element Manager is used to back up the IP data files to an ftp location. C. Element Manager is used to back up the IP data files to a 3.5?floppy disc. D. The ISP 1100 tools menu is used to back up the IP data files to a 3.5" floppy disc.
Answer: D
http://www.examkill.com/922-097.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Nortel
922-097
Nortel Communication Server 1000 System Upgrades to Rls. 5.0 for Technicians
Click the link below to buy full version as Low as $25
http://www.examkill.com/922-097.html
We also provide PDF Training Material for: Hot Exam 920-159
920-196
922-040
920-174
920-173
920-254
920-226
920-362
920-192
920-482
922-108
922-110
920-241
920-341
920-178
920-177
920-331
920-110
920-176
920-129
920-136
920-107
920-159
920-808
920-174
920-177
920-174
920-338
http://www.examkill.com/922-097.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6