650-325
Cisco
SP Video Phase II Cable Access Click the link below to buy full version as Low as $25 http://www.examkill.com/650-325.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 At a Hub site, what is the primary reason for converting the downstream optical signals to electrical (RF) form, and then back to optical? A. It allows the signal quality to be improved by regeneration B. It is less expensive than optical amplification C. It permits the addition of Narrowcast traffic, generated in the Hub D. It an industry-accepted procedure
Answer: C Question: 2 In general, which technique is less expensive when Automatic Protection Switching is required to improve reliability in an optical link between a Headend and a Hub? A. Wavelength switching under ROSA control B. Patch panel C. RF switching D. Optical switching
Answer: D Question: 3 How can you increase the bandwidth that is effectively available in the upstream signal path to each subscriber? A. using node segmentation C. install more cable modems C. increase the logical size of each node D. increasing the upper frequency limit of the HFC plant
Answer: A
http://www.examkill.com/650-325.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 4 What equipment should be added to the link of an optical transmitter, which has a dispersion limit of 65 km where the link is 95 km? A. DCM 65 B. DCM 30 C. DCM 95 D. DCM 9901
Answer: B Question: 5 What does the ‘value’ of a tap, printed on the face-plate mean? A. The reduction in signal level between the Feeder input and the Feeder output B. The amount of reflection at any RF port due to Return Loss C. The isolation between two output ports D. The reduction in signal level between the Feeder input and any subscriber port
Answer: D Question: 6 When a high-power optical signal passes through a fiber, the photons can cause a ‘ringing’ of the crystal lattices within the glass fiber core which give rise to acoustic phonons, which in turn interact with other photons of light. The result is an increase in noise in the received RF signal. What is the term for this phenomenon? A. Chirp B. Double Rayleigh Backscattering C. Raman pumping D. Stimulated Brillouin Scattering (SBS)
Answer: D
http://www.examkill.com/650-325.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 7 What does the expression ‘amplifier cascade’ mean? A. The difference between the signal levels at the high and low frequency limits B. The signal level at which distortion effects begin to increase exponentially C. The total number of RF amplifiers attached to a node D. The maximum number of amplifiers through which signals must pass to reach the most distant subscriber
Answer: D Question: 8 What is the most appropriate optical technology to transport groups of Narrowcast traffic from a Headend to a Hub when the number of available fibers is limited? A. 1310mm transmission B. DWDM C. CWDM D. O-band multiplexing
Answer: B Question: 9 What are the key advantages of optical transmission at 1550nm? (Choose two.) A. Lower cost of equipment B. Ability to optically amplify the signal C. Smaller equipment size D. Less power consumption E. Lower optical attenuation
Answer: B,E
http://www.examkill.com/650-325.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 10 In an HFC network, where does 75-95% of RF ingress (interference) originate? A. In the optical links B. In the Subscribers’ homes C. In the RF Distribution system D. In the RF Feeder System
Answer: B
http://www.examkill.com/650-325.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Cisco
650-325
SP Video Phase II Cable Access
Click the link below to buy full version as Low as $25
http://www.examkill.com/650-325.html
We also provide PDF Training Material for: Hot Exam 650-667
650-663
650-304
350-060
642-995
650-196
642-780
642-874
642-994
650-665
650-032
642-627
650-179
650-395
642-647
642-637
650-158
650-256
642-457
650-042
642-785
642-188
650-473
640-893
640-864
642-437
642-263
642-992
http://www.examkill.com/650-325.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6