920-322
Nortel
nncss succession 1000/1000m rls 3.0 db for technicians Click the link below to buy full version as Low as $25 http://www.examkill.com/920-322.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 Company.com has a Succession 1000/1000M Rls. 3.0system. The system administrator wants to add CallPilot, which requires an Embedded LAN (ELAN) to be built in the Action Device and Number (ADAN) section of Overlay LD 17 Configuration. Assume there is NO Symposium Call Center. What is the normal range of device numbers? A. 0-32 B. 16-31 C. 0-255 (user defined) D. number range is determined by the placement of the card
Answer: B Question: 2 Company.com with a Succession 1000M Rls. 3.0 system wishes to use their Ethernet LAN to carry functional signaling traffic for their Call Center Server. How should the Succession Call Server ELAN IP address be configured? A. The Succession Call Server ELAN NIC IP address must correspond to the Signaling ServerIP address configured in LD 117, and must be in the same subnet as the VGMC(Voice Gateway Media Card). B. The Succession Call Server ELAN NIC IP address must correspond to the active ELNK IP address shown in Load 137. C. Use the Succession Call Server installation CD-ROM menu to configure the IP address the same as the Gatekeeper IP address. D. The Succession Call Server ELAN NIC IP address must be configured in LD 117 to beunique in the system.
Answer: B Question: 3 Company.com wishes to grant a particular group of users access to a Succession 1000M 3.0 trunk group so that direct access is not automatically blacked for calls. Since the defaultvalue using Overlay LD 11 is set to automatically block direct access, what should the customer do to make the appropriate change? A. Set trunk Group Access Restriction (TGAR) to any value that is not withen (0-31). B. Leave the trunk Group Access Restriction (TGAR) empty. C. Set trunk Group Access Restriction (TGAR) to a value of 1. D. Set trunk Group Access Restriction (TGAR) to value other than 1.
Answer: D http://www.examkill.com/920-322.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 4 On a Succession 1000M Rls. 3.0 system, which prompt is used to specify whether the direction of a trunk rout will be Incoming and/or Outgoing? A. ICOG B. ICNT C. SIGL D. DLTN
Answer: A Question: 5 A large Succession 1000M Rls. 3.0 system uses Limited Access Passwords (LAPWs). Thesystem administrator wants to expand the access for some passwords. What is required to modify this part of the Configuration Record (Overlay LD 17)? A. PWD2 B. PWD1 C. Administrative password D. Basic Authorization code
Answer: A Question: 6 Company.com has a Succession 1000M Rls. 3.0 system installed. They notice the error message: ERR9006 "Invalid ESRT configuration. ACCD intercept treatment has been given to the set "on the PBX terminal. What action should be taken to correct this error? A. Correct the database B. Restore the database C. INI the switch D. Reboot the switch
Answer: A
http://www.examkill.com/920-322.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 7 Company.com is installing a Succession 1000M Rls. 3.0 system installed. They noticed error ERR4 143 data "cannot access NARS database?on the monitor. Which action should you take to correct this error? A. Restore NARS database. B. INI the switch. C. Check NARS database for space. D. Define ESN database for the customer.
Answer: D Question: 8 Company.com has installed a Succession 1000 Rls. 3.0 system. They to configure Start Arrangement incoming (STRI) prompt as part of Trunk Data Block programming in LD 14. STRI determines witch type of signaling will be used by the trunk to initate digit sending or collection. The customer wants to program the system so the terminating trunk to initlate digit sending or collection. The customer wants to program the system so the terminating trunk is NOT expected to return a pulse telling the originating end to begin sending digits. What is the correct value for STRI prompt considering customer's request? A. DDL B. OWK C. IMM D. WINK
Answer: C Question: 9 Company.com has installed a Succession 1000M Rls. 3.0 system. As part of system programming and configuration, the Customer Data Block has to programmed in LD 15. the customer wants to set up the system for the number of times a DID/DOD and CO trunk call will ring a set before being disconnected during Night Service. What is the prompt for this setting? A. NIPN B. NFCR C. NFNA D. NFNS
Answer: C http://www.examkill.com/920-322.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 10 Company.com with a Succession 1000M Rls. 3.0 system wants to modify the automated routine maintenance on the switch. Using Overlay LD 17 at the REQ prompt you enter CHG. At the TYPE prompt, what is the next input required display the Configuration Record 1 and allow changes? A. PARM B. OVLY C. MON_DATA D. NET_DATA
Answer: B
http://www.examkill.com/920-322.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Nortel
920-322
nncss succession 1000/1000m rls 3.0 db for technicians
Click the link below to buy full version as Low as $25
http://www.examkill.com/920-322.html
We also provide PDF Training Material for: Hot Exam 920-159
920-196
922-040
920-174
920-173
920-254
920-226
920-362
920-192
920-482
922-108
922-110
920-241
920-341
920-178
920-177
920-331
920-110
920-176
920-129
920-136
920-107
920-159
920-808
920-174
920-177
920-174
920-338
http://www.examkill.com/920-322.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6