920-127
Nortel
NNCSS Succession BCM 3.0 Exam Click the link below to buy full version as Low as $25 http://www.examkill.com/920-127.html
ExamKill is team of experienced and educated professionals working day and night to develop preparation material for different fields in IT. These industries are including HP, IBM, Comptia, Orcale, Apple, Adobe, Nortel, Novell, Checkpoint etc with the following features.
Free Samples:
Free samples download are available for almost every product to check before
buy.
Complete Course Coverage: Experienced professionals are making sure to cover complete course so that you pass final exam.
Updated Material: Preparation material is updated and new; you can compare us with other providers in the same industry.
Privacy Protection:
Examkill team makes sure not to reveal your private information
including your credit card and other secret information.
Excellent Customer Support: You will get reply from examkill support within 8 hours for all your questions/concerns about anything.
www.examkill.com
Question: 1 A BCM customer wants to make and receive calls across an IP network that includes Meridian 1. What is needed on the Meridian 1 side for successful completion of calls with BCM in this network? A. WAN setup B. OSPF protocol C. UNISTIM protocol D. M1 internet telephony Gateway
Answer: A Question: 2 A BCM 3.0 customer has a low bandwidth WAN link and is using IP Trunks with the default CODEC across the WAN. In order to ensure the least amount of bandwidth is used, which of the following will help lower the bandwidth consumption? A. Increase the Jitter Buffer B. Decrease the Jitter Buffer C. Enable Silence Compression D. Change the CODEC to G.711
Answer: C Question: 3 Company.com is running voicemail, IP Sets, IP Trunks, and WAN (ISDN Dialup). They are experiencing intermittent "no resources available" error messages when accessing IP Trunks. What would be the most likely cause of this problem? A. Incorrect CODEC on H.323 Trunks B. Incorrectly assigned MSC resources C. Invalid Line Pools assigned Media Bay Module resources D. Incorrectly assigned Media Bay Module resources
Answer: B
http://www.examkill.com/920-127.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
2
Question: 4 Company.com wants to install 60 IP Sets and has decided to use their own DHCP server to assign IP addresses. They have configured the DHCP server Option 128 with the Nortel IP Terminal information. What configuration settings are necessary to have the IP Sets register and enable automatically (plug and play)? A. Enable DHCP on the BCM 3.0 and no other programming is necessary B. Set Registration to On, the Password to Blank, and the Auto Assign DNs to On C. Set Registration to Off, the Password to Blank, and the Auto Assign DNs to On D. Set Registration to On, the Password to Blank, and the Auto Assign DNs to Off
Answer: B Question: 5 Company.com is currently running in an unreliable network due to service provider outages. They are requesting that IP Trunk calls be routed automatically over the PSTN during these outages. What service would need to be activated and configured to detect these outages in order to allow the calls to be rerouted? A. QoS Monitor B. Alarm Service C. Console Service D. Policy Management
Answer: A Question: 6 You are configuring a BCM 3.0 for MCDN over IP with a Meridian 1 ITG. The big feature the customer is interested in is tromboning on both forwarded and transferred IP trunk calls. What feature must you ensure are enabled the BCM 3.0 and Meridian 1? A. TAT only B. TAT and TRO C. TAT and NAT D. TAT and ICCL
Answer: B http://www.examkill.com/920-127.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
3
Question: 7 A new customer is replacing their existing phone system with a BCM 3.0. The customer has some Symbol handsets, which they wish to use with the BCM 3.0. Realizing the firmware in the handsets is probably the wrong vintage, You tell the customer that all the Symbol handsets must have the firmware upgraded. What would you need to use to upgrade the firmware? A. A TFTP Server B. A NVPA Tool and a Symbol Serial cable C. A Hyper Terminal and a Symbol Serial cable D. Nothing. The BCM 3.0 will do this automatically
Answer: B Question: 8 Company.com has a BCM 3.0 configured as a 3/5 spit with 0 voice mail/ CallPilot ports, no WAN, no IP trunks, and currently has 20 IP Sets configured. They wish to add more IP Sets. What is the maximum number of IP Sets that can be acded to this configuration? A. 32 B. 64 C. 70 D. 90
Answer: C Question: 9 You are engineering a new BCM 3.0 network for VoIP and are trying to determine how many G.729 IP trunk calls can be made without over subscribing the PPP WAN links. What would be the optimal value to use for estimating bandwidth consumption per media path between BCM 3.0 OS USING A g.729 CODEC ON ip TRUNKS? A. 8 kbit/s B. 12 kbit/s C. 25 kbit/s D. 48 kbit/s
Answer: C http://www.examkill.com/920-127.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
4
Question: 10 Company.com is using their BCM 3.0 as a firewall and gets a new ISP that requires that their BCM 3.0 LAN IP address needs to change. You have entered and applied the new IP address. What must be done in order to get the change to take effect? A. Reboot the BCM 3.0 B. Stop and restart the Firewall Service C. Exit and re-enter the Configuration Menu D. Stop and restart the Netlink Manager Service
Answer: A
http://www.examkill.com/920-127.html
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
5
Nortel
920-127
NNCSS Succession BCM 3.0 Exam
Click the link below to buy full version as Low as $25
http://www.examkill.com/920-127.html
We also provide PDF Training Material for: Hot Exam 920-159
920-196
922-040
920-174
920-173
920-254
920-226
920-362
920-192
920-482
922-108
922-110
920-241
920-341
920-178
920-177
920-331
920-110
920-176
920-129
920-136
920-107
920-159
920-808
920-174
920-177
920-174
920-338
http://www.examkill.com/920-127.html
www.examkill.com
Adobe Apple Cisco CompTIA HP EMC IBM Microsoft Oracle Juniper
6