Novalux E Top Quality Water-Based, Washable Paint for interiors and exteriors GENERAL FEATURES: Novalux E is a water-based washable paint for interiors and exteriors, made of dispersion of acrylic and styrene copolymers, selected mineral charges, titanium dioxide and rheological modifiers which ensure optimum workability. USES Novalux E is particularly indicated as top finishing coat on lime and mineral plasters and mortars, gypsum plasters, concrete mixes with compact and flat surfaces. IDENTIFICATION FEATURES Nature of the binding agent: dispersion of acrylic and styrene copolymer. Density: Novalux E White: 1,58 +/- 0,05 g/ml Novalux E Base Deep: 1,53 +/- 0,05 g/ml Novalux E Base Accent: 1,48 +/- 0,05 g/ml PERFORMANCE FEATURES Novalux E is a washable paint and ensures the following performances: Easy application Washability High adhesion on the surface Resistance to alkalis DILUTION Acrilak: 1:4-1:5 dilution with water. Novaprimer White: 50-80% dilution with water. Novalux E: max 30% dilution with water. WARNING Mix the product properly before the tinting phase and the application cycle. SUBSTRATE PREPARATION (T=25° C,UR=60%) The surface must be dry and clean, dust-free and without any salt stain. In
most cases a light brushing off would do. In case of smooth surfaces, apply one coat of Novaprimer (see Diluition) with brush or short-air roller. In case of no smooth surfaces, apply one coat of Acrilak (see Diluition), with brush or short-hair roller, depending on the kind of support. After 4 hours at least, apply one layer of Novalux E (see dilution) with brush, short-air roller or spray-gun. Remove any imperfection or excess of material. After 12 hours, apply a second layer of Novalux E (see dilution) with brush,short-air rolleror spray-gun. Drying time: 24 hours approx. depending on the tye of support and its absorption rate, considering standard environmental conditions. RECCOMENDATIONS The product must be protected from cold and high heat changes, during the entire application process. Do not apply with air, substrate and product temperature lower than +10°C and higher than +35°C, nor under direct sun light, nor on superheated surfaces (even if already in shadow). It is advisable to complete each work with materials from the same batch of production. The application of Novalux E in exteriors has to be considered using light nuances and pigments for outdoors. TOOLS CLEANING With water, immediately after use. YIELD 2 Acrilak: 20-30 m /l, depending on the type of substrate and its absorption rate. 2 Novaprimer: 8-10 m /l, depending on the type of substrate and its absorption rate. 2 Novalux E: 6-7 m /l, depending on the type of substrate and its absorption rate.
COLOURS White, “Progetto Colore” color Swatch and “Interior Paint Collection” color card. PACKAGES 1 l cans for white base only; 5 l and 14 l buckets. SHELF LIFE The packaged product is guaranteed for 24 months, if stored in the original sealed package and at temperatures between +5°C and +35°C. SECURITY PROCEDURES EU Directive 2004/42/CE: Novalux E (paint for exteriors mineral facades) EU limit value for Novalux E (cat A/c):40 g/l (2010) Novalux E contains 35 g/l max of VOC.
The product does not require the label as per the D.L. 65 dated 14/03/03 and following corrections. Use the products as per the security and hygiene procedures rules. Dispose of the empty packaging remaining material in compliance with local laws. Keep the product away from children usage and in an airy place. In case of contact with eyes, wash them immediately with water. In case of ingestion of the products, consult immediately a doctor showing him the can or the label of the product. Do not leave wastes in drains, water courses and on the ground. For further information consult the safety data sheet. N.B.- The information reported in this technical data sheet comes from our best experience; however this does not involve any responsibility of our Company for applications of this product without our control.
Technical Data Sheet:Novalux E Revision n: 06 Date: 01-03-2012 Page 1 of 1