Skin Printed paper with “Crocodile” and “Python” effect GENERAL FEATURES Printed paper with “crocodile” and “python” effect for the decoration of luxury interiors. USES Decoration of highly valuable interiors, in line with the most cutting edge trends in architecture. “Skin System” is an exclusive and customised wall complement. IDENTIFICATION FEATURES Binder nature: Novaprimer: water-based acrylic and styrene co-polymer Vinavil Special: water-based polyvinyl acetate Vinavil NPC Stella Bianca: water-based polyvinyl acetate Novalux E: water-based acrylic and styrene co-polymer Dune Base Silver: water-based acrylic polymer Dune Gold 8600: water-based acrylic polymer Africa: water-based acrylic polymer Cera-Wax: compound of water-based polyethylene and paraffin waxes Cera Gold, Silver, Bronze: compound of water-based polyethylene and paraffin waxes Density: Novaprimer: 1,39 +/- 0,05 g/ml Vinavil Special: : 1,00 +/- 0,05 g/ml Vinavil NPC Stella Bianca: 1,00 +/- 0,05 g/ml Novalux E Bianco e Base Pastel: 1,58 +/- 0,05 g/ml Dune Base Silver: 1,10 +/- 0,05 g/ml Dune Gold 8600: 1,10 +/- 0,05 g/ml Cera-Wax: 1,01 +/- 0,05 g/ml Cera Gold, Silver, Bronze: 1,02 +/- 0,05 g/ml PERFORMANCES Skin is a system made of textile nontextile sheets mm 1400x1400, available in the two “crocodile” and “python”
effects, that can be decorated with different finishes from Novacolor range of decorative products. It results in an elegant and customised wall complement. The achievable effects are: “crocodile” effect “python” effect DILUTION Novaprimer: 50-80% with water Vinavil Special: 30-40% with water Vinavil NPC Stella Bianca: 30-40% with water Novalux E Bianco e Base pastel: dilute with maximum 15% of water Dune Base Silver: dilute with maximum 20% of water Dune Gold 8600: dilute with maximum 20% of water Africa: dilute with maximum 20% of water Cera-Wax: ready for use Cera Gold, Silver, Bronze: ready for use WARNING Sheets are available only in the mm 1400x1400 size. Properly mix the product before coloration and application. It is possible to apply one or more of the above mentioned products, depending on the desired effect. The application of Novalux E, colored or in the same tint of the desired finish, will increase the hiding power of the product. SUBSTRATE PREPARATION AND APPLICATION (T=25°C, UR=60%) “Crocodile” effect The substrate must be perfectly smooth, dry, dust-free, with no humidity and salt stains.
With a roller or a brush, apply one coat of Novaprimer diluted with 50-80% of water. After at least 4 hours (T=25°C, UR=60%), with a brush, apply one coat of Vinavil Special diluted with 30-40% of water or, as an alternative, Vinavil Stella Bianca diluted with 30-40% of water. Paste immediately on the wall the sheet with the desired effect, starting with the part of the sheet marked with a black spot, and then proceeding pasting the rest with a clean and dry brush or, as an alternative, with a plastic trowel, until obtaining the complete adherence of the sheet on the surface. Wait for a time between 45 and 60 minutes, making sure that the sheet is tight, then apply with a brush a second coat of Vinavil Special diluted with 3040% of water or, as an alternative, Vinavil Stella Bianca diluted with 3040% of water. After 24 hours (T=25°C, UR=60%), apply with a brush or with a roller, one coat of Novalux E diluted with maximum 15% of water. After at least 4 hours (T=25°C, UR=60%), apply with a brush or with a roller a second coat of Novalux E diluted with maximum 15% of water. After at least 8 hours (T=25°C, UR=60%), apply with a brush or with a roller one coat of Dune or Africa diluted with maximum 20% of water, depending on the desired effect. After at least 8 hours (T=25°C, UR=60%), apply with a brush or with roller a second coat of Dune or Africa diluted with maximum 20% of water. To achieve a “soft” effect, it is possible to apply with a sponge trowel or with a plastic trowel, one coat of Cera Wax available in Neutral, Silver, Gold or Bronze, depending on the desired effect.
Technical Data Sheet: Skin Revision n: 07 Date: 01-03-2012 Page 1 of 2
“Python” effect The substrate must be perfectly smooth, dry, dust-free, with no humidity and salt stains. With a roller or a brush, apply one coat of Novaprimer diluted with 50-80% of water. After at least 4 hours (T=25°C, UR=60%), with a brush, apply one coat of Vinavil Special diluted with 30-40% of water or, as an alternative, Vinavil Stella Bianca diluted with 30-40% of water. Paste immediately on the wall the sheet with the desired effect, starting with the part of the sheet marked with a black spot, and then proceeding pasting the rest with a clean and dry brush or, as an alternative, with a plastic trowel, until obtaining the complete adherence of the sheet on the surface. Wait for a time between 45 and 60 minutes, making sure that the sheet is tight, then apply with a brush a second coat of Vinavil Special diluted with 3040% of water or, as an alternative, Vinavil Stella Bianca diluted with 3040% of water. After 24 hours (T=25°C, UR=60%), apply with a brush or with a roller, one coat of Novalux E diluted with maximum 15% of water. After at least 4 hours (T=25°C, UR=60%), apply with a brush or with a roller a second coat of Novalux E diluted with maximum 15% of water. After at least 8 hours (T=25°C, UR=60%), apply with a brush or with a roller one coat of Dune or Africa diluted with maximum 20% of water, depending on the desired effect. After at least 8 hours (T=25°C, UR=60%), apply with a brush or with roller a second coat of Dune or Africa diluted with maximum 20% of water. To achieve a “soft” effect, it is possible to apply with a sponge trowel or with a plastic trowel, one coat of Cera-Wax available in Neutral, Silver, Gold or Bronze, depending on the desired effect. RECOMMENDATIONS The material must be protected from cold and high heat during the entire application cycle. Do not apply with air, support and product temperature lower than +5°C or
higher than +35°C, nor under direct sun light, nor over extremely hot surfaces (even if already in the shadow). It is advisable to complete each project with material from the same batch of production. TOOLS CLEANING With water, immediately after use. YIELD 2 Novaprimer: 8-10 m /l, depending on the kind of substrate and its absorption rate. 2 Vinavil Special: 2,5-3,5 m /l, considering both the pasting and the surface treatment, depending on the kind of substrate and its absorption rate. Vinavil NPC Stella Bianca: 2,5-3,5 2 m /l, considering both the pasting and the surface treatment, depending on the kind of substrate and its absorption rate. Novalux E Bianco e Base Pastel: 5-7 2 m /l, depending on the kind of substrate and its absorption rate. 2 Dune - Africa: 8-10 m /l, for the two coats, depending on the kind of substrate and its absorption rate. 2 Cera-Wax: 15-20 m /l, depending on the kind of substrate and its absorption rate. COLORS Dune Base Silver, Dune Gold 8600, color card Dune and color card Africa. PACKAGING Single sheets and packages of 1 l, 2,5 l, 5 l, 14 l, depending on the product used. For further details see the technical data sheets of each product. SHELF LIFE The packaged product is guaranteed for 24 months, if stored in the original sealed package and at temperatures between +5°C and +35°C. SECURITY PROCEDURES Policy 2004/42/CE: Novaprimer (primer) EU limit value for Novaprimer (cat A/g): 30 g/l (2010) Novaprimer contains maximum 29 g/l of VOC.
Novalux E (mineral paint for exterior walls) EU limit value for Novalux E (cat A/c): 40 g/l (2010) Novalux E contains maximum 35 g/l of VOC. Dune (decorative paint) EU limit value for Dune (cat A/g): 200 g/l (2010) Dune contains maximum 45 g/l of VOC. Africa (decorative paint) EU limit value for Africa (cat A/c): 200 g/l (2010) Africa contains maximum 20 g/l of VOC. Cera-Wax (decorative paint) EU limit value for Cera-Wax (cat A/g): 200 g/l (2010) Cera-Wax contains maximum 15 g/l of VOC. The product does not require the label as per the D.L. 65 dated 14/03/03 and following corrections. Use the products as per the security and hygiene procedures rules. Dispose of the empty packaging remaining material in compliance with local laws. Keep the product away from children usage and in an airy place. In case of contact with eyes, wash them immediately with water. In case of ingestion of the products, consult immediately a doctor showing him the can or the label of the product. Do not leave wastes in drains, water courses and on the ground. For further information consult the safety data sheet. N.B.- The information reported in this technical data sheet comes from our best experience; however this does not involve any responsibility of our Company for applications of this product without our control.
For further details, please see the specific technical data sheets of each product.
Technical Data Sheet: Skin Revision n: 07 Date: 01-03-2012 Page 2 of 2