MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
MIS Implants Technologies Ltd. is a dynamic, rapidly growing, research, production and marketing company, specialized in
MIS offers technicians a range of innovative
the development and manufacturing of advanced solutions for
tools that ease and simplify lab work, and
dental implantology. The MIS mission in is every to simplify help reach higher accuracy case.dental implantology, by offering creative solutions, for a better quality of life.
Š MIS Corporation. All Rights Reserved.
4.
Table of Contents
Implant ImplantsSystems System
SEVEN 8 - 15 M4 16-23 24 Implant Insertion Tools UNO 25-28 LINK 29 Packaging 30 Implant Label Colors 31
Surgical Instruments Instruments
Pilot Drills - External Irrigation - SEVEN 34 Twist Drills - External Irrigation- SEVEN 35 36 Pilot Drills - External Irrigation - M4 Twist Drills - External Irrigation- M4 37 38-39 Short Twist Drills - External Irrigation SEVEN & M4 Procedure 40-41 Twist Drills - Internal Irrigation SEVEN & M4 Procedure Marking Drills & Countersinks 42 Trephine Burs 43 Ceramic Drills - External Irrigation 43 Surgical Tools - UNO 44 Surgical Tools 45-46 47 Prosthetic hex. driver Surgical Instruments 48 Torque Ratchet Kit 49
Kits
SEVEN Advanced Surgical Kit 52-53 M4 Advanced Surgical Kit 54-55 M4 Drilling Set 56 Yeung Bone Harvest Kit 57 SEVEN Standard Platform Stoppers Kit 58 59 SEVEN Drill Stoppers Kits - Depth-Based Abrahami Drill Guide Kit 60-61 Bone Compression Kit 62-63 UNO Implant Surgical Kit 64-65 66-67 Prosthetic Tools Kit Sinus Lift Osteotomes Set 68 Convex Osteotomes Set 69 MIS Manuals Kits 70-71
Accessories Prosthetic Options
Narrow Platform Analog and Impression Copings NPK - Narrow Prosthetic Kits Direct, Screw Retained Restoration Options Cemented Restoration Options Ti Base Kit - Single Tooth Restoration Ti Base Kit - Multi Unit Restoration OT Equator KIts Zirconia Abutment Kits Ball Attachment System Locator Attachment System
6-31
32-49
50-71 Kits
72-130
73 74-75 76 77 78 79 80-81 82-83 84 85-86
Standard Platform Analogs and Impression Coping 87 CPK - Complete Prosthetic Kit 88-89 Direct, Screw Retained Restoration Options 90 91 Cemented Restoration Options Direct, Cemented Restoration Options 92-93
Ti Base Kit - Single Tooth Restoration Ti Base Kit - Multi-Unit Restoration OT Equator Kits Zirconia Abutment Kits Multi-Unit System Multi-Unit Angulated Ball Attachments Angulated Ball Attachments Locator Attachment System
94 95 96-97 98-101 102-103 104 105 106-107 108-109
Wide Platform Analog and Impression Copings 110-111 CPK - Complete Prosthetic Kit 112-113 Direct, Screw Retained Restoration Options 114 Cemented Restoration Options 115 Direct, Cemented Restoration Options 116-117 Ti Base Kit - Single Tooth Restoration 118 Ti Base Kit - Multi-Unit Restoration 119 OT Equator Kits 120-121 Zirconia Abutment Kits 122-123 Multi-Unit System 124-125 Ball Attachment System 126-127 Locator Attachment System 128-129 Bars - Reconstruction System
Accessories 131-149
Bone Augmentation Materials 150-159
Appendix 160-167
Index 168-188
130
Prosthetic Instruments 132-134 135 Zircon Diamond Burr Set 136-137 Prosthetic Planning Kit MCU Control Unit 138-139 Crown Set 140 141 Abutment Holding System Kit Prosthetic Introduction Case 142-143 MGUIDE Surgical Kit 144-149
4BONE® XBM - Bovine Bone Matrix 4BONE® BCH - Synthetic Bone Substitute BONDBONE® - Bonding Graft Material RCB-Resorbable Conforming Barrier Membrane RSB-Resorbable Collagen Barrier Membrane RCM - Resorbable Collagen Membrane 4BONE® TAPE - Wound Dressings 4BONE® PLUG - Wound Dressings
1 52 153 154 155 156 157 158 159
Alloy Compositions Restorative Components Diameter and Platform Color Coding Label Description MIS Manuals - Symbol Index
162 163 164 165 166-167
Index 169-188
6.
Implant Systems. MIS proudly offers a wide range of implant systems, providing simple solutions for all clinical scenarios, from the basic to the most complex. Each and every implant design is based on long history of research and development. All implants are made of biocompatible, medical grade, Titanium Alloy. The surface of all MIS implants is roughened by both sand blasting and acid-etching, promoting long lasting osseointegration. MIS adheres to the most stringent international quality standards, complying with ISO 13485: 2003 Quality Management System for Medical Devices. Products that appear in this catalog are CE approved and FDA cleared for marketing.
MIS SEVEN self-tapping implants are designed for a wide range of bone types and bone augmentation procedures. Their unique geometric design features dual threads, three spiral channels stemming from the apex, micro-rings on the implant neck and a large pitch thread design. Following our commitment to Make It Simple, MIS was the first company to include a sterile, single-use final drill with each and every SEVEN implant, to ensure a safer and more accurate drilling procedure.
MIS M4 implants combine a cylindrical and conical body shape with V-shaped threads. It is designed for either two-stage or single-stage surgical procedures. The cylindrical shape provides excellent primary stability. The self-tapping thread design, three spiral channels and flat cutting apex, make M4 implants the ideal choice for use in dense bone.
UNO One Piece implants are mainly indicated for the restoration of narrow ridges and tight spaces, where augmentation is either contraindicated or not feasible. Specific indications may include single or multiple missing teeth in the anterior mandibular area and restoration of maxillary lateral incisors. Thanks to their advanced double-thread geometry and recognized surface technology, UNO implants allow for a quick and effortless placement and long lasting osseointegration.
8.
NARROW ®
Screw type implants range
Narrow Platform 6mm
Length
8mm
10mm
11.50mm
13mm
16mm
MF7-13330
MF7-16330
Type MF7-10330
MF7-11330
Ø3.30 mm
Surgical tools
(For more information please refer to page no. 45-46)
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP
Implant cover screw & healing caps Available for heights: 2,3,4,6,8mm
Ø 4mm 2/3/4/6/8mm
MC1-00330
MH-N2330 MH-N3330 MH-N4330 MH-N6330 MH-N8330
Ø 4.3mm 2/3/4/5/6
MH-52330 MH-53330 MH-54330 MH-55330 MH-56330
®
Ø3.30mm Narrow Platform
Dimensions
Catalog No.
Ø 3.30mm length 10mm
MF7-10330
SEVEN internal hex. implant
Ø 3.30mm length 11.50mm
MF7-11330
NARROW
MF7-13330
Ø 3.30mm length 13mm
MF7-16330
Ø 3.30mm length 16mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.10
Ø 3.30
Ø 3.20
L
Final Drill Ø 2.20
Ø 2.40
A specially designed final drill for 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing a for an easier and safer drilling procedure.
Ø3.30mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø2.40
200400
15-25
Ø2.20 Ø3.20
Ø3.30
Final drill For bone type 1&2
Do not use the final drill for bone types 3&4 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
10.
STANDARD ®
Screw type implants range
Standard Platform 6mm
Length
8mm
10mm
MF7-08375
MF7-10375
11.50mm
13mm
16mm
MF7-13375
MF7-16375
Surgical tools
Type MF7-11375
(For more information please refer to page no. 45-46)
Ø 3.75 mm MT-HLI10
Long insertion tool, int. hex. connection
MF7-06420
MF7-08420
MF7-10420
MF7-11420
MF7-13420
MT-HSI10
MF7-16420
Short insertion tool, int. hex. connection
Ø 4.20 mm MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Implant cover screw & healing caps Available for heights: 3,4,5,6mm
MC1-00375
Ø 4mm 3/4/5/6mm
Ø 5.5mm 3/4/5/6mm
MH-03375 MH-04375 MH-05375 MH-06375
MH-53375 MH-54375 MH-55375 MH-56375
®
Catalog No.
Dimensions
MF7-08375
Ø 3.75mm length 8mm
Ø3.75mm
Standard Platform
SEVEN internal hex. implant
Ø 3.75mm length 10mm
MF7-10375
MF7-11375
Ø 3.75mm length 11.50mm
MF7-13375
Ø 3.75mm length 13mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø 3.75mm length 16mm
MF7-16375
STANDARD
Ø 3.60
Ø 3.75
L
Final Drill Ø 2.80
A specially designed final drill for 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
Ø 3.10
Ø3.75mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
500700 Ø2.40
Ø2.80
Ø2.80
200400
200500
Ø2.80 Ø3.60
Ø3.75
15-25 Ø3.75
OR
Final drill For bone type 1&2
MT-GDN33 Countersink For bone type 3&4
Do not use the final drill for bone type 3&4 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
12.
®
STANDARD
Ø4.20mm
Standard Platform
Catalog No.
Dimensions
MF7-06420
Ø 4.20mm length 6mm
SEVEN internal hex. implant
Ø 4.20mm length 8mm
MF7-08420
MF7-10420
Ø 4.20mm length 10mm
MF7-11420
Ø 4.20mm length 11.50mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø4.20
Ø4.10
MF7-13420
Ø 4.20mm length 13mm
MF7-16420
Ø 4.20mm length 16mm
Ø 3.75 0.4mm
L
Final Drill Ø3.30
A specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
Ø 3.70
Ø4.20mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
Ø2.80
Ø3.20
Ø3.20
200400
200500
Ø3.30 Ø4.10
Ø3.30 Ø4.20
15-25 Ø4.20
OR
Final drill For bone type 1&2
MT-GDN33 Countersink For bone type 3&4
Do not use the final drill for bone types 3&4 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
WIDE ®
Screw type implants range
Wide Platform Length
6mm
8mm
10mm
MF7-06500
MF7-08500
MF7-10500
11.50mm
13mm
16mm
MF7-13500
MF7-16500
Surgical tools
Type MF7-11500
(For more information please refer to page no. 45-46)
Ø5 mm MT-HLI10
Long insertion tool, int. hex. connection
MF7-06600
MF7-08600
MF7-10600
MF7-11600
MT-HSI10
MF7-13600
Short insertion tool, int. hex. connection
Ø6 mm MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Implant cover screw & healing caps Available for heights: 3,4,5mm
MC1-00470
Ø 5mm MH-W3500 MH-W4500 MH-W5500
3/4/5mm
Ø 6.5mm 3/4/5mm
MH-W3630 MH-W4630 MH-W5630
14.
WIDE
®
Catalog No.
Dimensions
MF7-06500
Ø 5mm length 6mm
Ø5mm
Wide Platform
SEVEN internal hex. implant
Ø 5mm length 8mm
MF7-08500
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
MF7-10500
Ø 5mm length 10mm
MF7-11500
Ø 5mm length 11.50mm 2.45
Ø 4.90
Ø5
Ø 5mm length 13mm
MF7-13500
Ø 4.50 0.4mm
L
Final Drill
Ø 5mm length 16mm
MF7-16500
A specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
Ø 4.50
Ø 4.10
Ø5mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
300500
Ø2.80
Ø3.20
Ø4
Ø4
200400
200500
Ø4.10 Ø 4.90
Ø5
15-25 Ø5
OR
Final drill For bone type 1&2
MT-GDN50 Countersink For bone type 3&4
Do not use the final drill for bone types 3&4 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
®
Catalog No.
Dimensions
MF7-06600
Ø 6mm length 6mm
Ø6mm
Wide Platform
SEVEN internal hex. implant
Ø 6mm length 8mm
MF7-08600
WIDE
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
MF7-10600
Ø 6mm length 10mm
MF7-11600
Ø 6mm length 11.50mm 2.45
Ø6 Ø 5.90 Ø 4.50
Ø 6mm length 13mm
MF7-13600
0.4mm
L
Final Drill Ø 5.10
A specially designed final drill for 6, 8, 10, 11.50 and 13mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
Ø 5.50
Ø6mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2.40
Ø2.40
500700
400700
300500
300500
300500
Ø2.80
Ø3.20
Ø4
Ø4.50
Ø5
Ø5
200400
200500
Ø5.10 Ø 5.90
Ø6 OR
Final drill For bone type 1&2
MT-GDN50 Countersink For bone type 3&4
15-25 Ø6
16.
NARROW Screw type implants range
Narrow Platform 6mm
Length
8mm
10mm
11.50mm
13mm
16mm
MF4-13330
MF4-16330
Type MF4-10330
MF4-11330
Ø3.30 mm
Surgical tools
(For more information please refer to page no. 45-46)
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP
Implant cover screw & healing caps Available for heights: 2,3,4,6,8mm
Ø 4mm 2/3/4/6/8mm
MC1-00330
MH-N2330 MH-N3330 MH-N4330 MH-N6330 MH-N8330
Ø 4.3mm 2/3/4/5/6
MH-52330 MH-53330 MH-54330 MH-55330 MH-56330
NARROW
Ø3.30mm Narrow Platform
Dimensions
Catalog No.
Ø 3.30mm length 10mm
MF4-10330
M4 internal hex. implant
Ø 3.30mm length 11.50mm
MF4-11330
MF4-13330
Ø 3.30mm length 13mm
MF4-16330
Ø 3.30mm length 16mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.10
Ø3.30
L
Ø 2.65
Ø3.30mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
500700
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.00 Ø3.30
Ø3.30
OR For bone type 1&2
MT-CSN33 Countersink For bone type 3&4
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
18.
STANDARD Screw type implants range
Standard Platform 6mm
Length
8mm
10mm
MF4-08375
MF4-10375
11.50mm
13mm
16mm
MF4-13375
MF4-16375
Surgical tools
Type MF4-11375
(For more information please refer to page no. 45-46)
Ø 3.75 mm MT-HLI10
Long insertion tool, int. hex. connection
MF4-06420
MF4-08420
MF4-10420
MF4-11420
MF4-13420
MT-HSI10
MF4-16420
Short insertion tool, int. hex. connection
Ø 4.20 mm MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Implant cover screw & healing caps Available for heights: 3,4,5,6mm
MC1-00375 MC1-00375 MC1-00375 MC1-00375
3/4/5/6mm 3/4/5/6mm
3/4/5/6mm 3/4/5/6mm
Ø 4mm Ø 4mm
Ø 5.5mm Ø 5.5mm
MH-03375 MH-04375 MH-03375 MH-05375 MH-04375 MH-06375 MH-05375 MH-06375
MH-53375 MH-53375 MH-54375 MH-54375 MH-55375 MH-55375 MH-56375 MH-56375
STANDARD
Ø3.75mm
Standard Platform
Catalog No.
Dimensions
MF4-06375
Ø 3.75mm length 6mm
MF4-08375
Ø 3.75mm length 8mm
MF4-10375
Ø 3.75mm length 10mm
MF4-11375
Ø 3.75mm length 11.50mm
M4 internal hex. implant
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø 3.75
Ø 3.75mm length 13mm
MF4-13375
L
Ø 3.75mm length 16mm
MF4-16375
Ø3
Ø3.75mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
500700
400700
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.20 Ø3.75
Ø3.75
OR For bone type 1&2
MT-GDN33 Countersink For bone type 3&4
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
20.
STANDARD
Ø4.20mm
Standard Platform
Catalog No.
Dimensions
MF4-06420
Ø 4.20mm length 6mm
M4 internal hex. implant
Ø 4.20mm length 8mm
MF4-08420
MF4-10420
Ø 4.20mm length 10mm
MF4-11420
Ø 4.20mm length 11.50mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø 4.20 Ø 3.75
0.4mm
Ø 4.20mm length 13mm
MF4-13420
L
Ø 4.20mm length 16mm
MF4-16420
Ø 3.65
Ø4.20mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø3.20 Ø4.20
Ø4.20
OR For bone type 1&2
MT-GDN33 Countersink For bone type 3&4
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
WIDE Screw type implants range
Wide Platform Length
6mm
8mm
10mm
11.50mm
13mm
16mm
MF4-06500
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
Surgical tools
Type
(For more information please refer to page no. 45-46)
Ø5 mm MT-HLI10
Long insertion tool, int. hex. connection
MF4-06600
MF4-08600
MF4-10600
MF4-11600
MT-HSI10
MF4-13600
Short insertion tool, int. hex. connection
Ø6 mm MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Implant cover screw & healing caps Available for heights: 3,4,5mm
MC1-00470
Ø 5mm 3/4/5mm
MH-W3500 MH-W4500 MH-W5500
Ø 6.5mm 3/4/5mm
MH-W3630 MH-W4630 MH-W5630
22.
WIDE Catalog No.
Dimensions
MF4-06500
Ø 5mm length 6mm
Ø5mm
Wide Platform
M4 internal hex. implant
Ø 5mm length 8mm
MF4-08500
MF4-10500
Ø 5mm length 10mm
MF4-11500
Ø 5mm length 11.50mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø5 Ø4.50
Ø 5mm length 13mm
MF4-13500
0.4mm
L
Ø 5mm length 16mm
MF4-16500
Ø4.35
Ø5mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
400600
200500
15-25
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø4.50
Ø4.50 Ø5.00
Ø5
OR For bone type 1&2
MT-GDN50 Countersink For bone type 3&4
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
WIDE Catalog No.
Dimensions
MF4-06600
Ø 6mm length 6mm
Ø6mm
Wide Platform
M4 internal hex. implant
Ø 6mm length 8mm
MF4-08600
MF4-10600
Ø 6mm length 10mm
MF4-11600
Ø 6mm length 11.50mm
Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched
2.45
Ø6 Ø4.50
Ø 6mm length 13mm
MF4-13600
0.4mm
L
Ø 5.35
Ø6mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
500700
400700
400600
400600
300500
300500
200500
Diameter
Ø1.90
Ø2.4
Ø2.80
Ø3.20
Ø3.80
Ø4.50
Ø5
Ø5.50
Ø4.50 Ø6.00 OR
For bone type 1&2
MT-GDN50 Countersink For bone type 3&4
15-25 Ø6
24.
Implant Insertion Tools
2 1
3
Implant insertion tools are designed to facilitate quick and reliable implant placement procedures. The unique "3 in 1" key system, minimizes the number of tools required and maximizes flexibility.
1 Insertion tool for hand key adapter 2 Insertion tool for motor 3 Insertion tool for ratchet adapter
Please note: In order to assure efficient operation, keys should be fully inserted into the implants. Complete insertion of the key optimizes the transfer of force during implant placement and enables simple release of the key from the hex. at the end of the procedure. Key will not hold the implant properly unless it is completely securely inserted into the hex.
Implant insertion tools The improved insertion tool allows the delivery of a cover screw or a healing cap onto the implant after insertion.
MT-HLI10
Long insertion tool, int. hex. connection
MT-HSI10
Short insertion tool, int. hex. connection
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection
Screw type implants range
One Piece Length
10mm
11.50mm
13mm
16mm
MO1-10300
MO1-11300
MO1-13300
MO1-16300
MO1-10350
MO1-11350
MO1-13350
MO1-16350
Type
Ø 3 mm
Ø 3.50 mm
Surgical Tools
MT-HKS15 UNO One Piece implant short key
MT-HKL21 UNO One Piece implant long key
MT-HKO21 UNO One Piece implant insertion tool
26.
Ø3mm
Catalog No.
One Piece
Dimensions
Ø 3mm length 10mm
MO1-10300
UNO One Piece Implant
Ø 3mm length 11.50mm
MO1-11300
MO1-13300
Ø 3mm length 13mm
MO1-16300
Ø 3mm length 16mm
Titanium Alloy Ti 6Al 4V ELI Thread section is Sand Blasted and Acid-Etched
6.3mm
2.7mm Ø3
L
Ø3mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2
15-25
700900 Ø2
Ø2.40
Ø2.4
Ø3
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Ø3.50mm
Catalog No.
One Piece
Dimensions
Ø 3.50mm length 10mm
MO1-10350
UNO One Piece Implant
Ø 3.50mm length 11.50mm
MO1-11350
MO1-13350
Ø 3.50mm length 13mm
MO1-16350
Ø 3.50mm length 16mm
Titanium Alloy Ti 6Al 4V ELI Thread section is Sand Blasted and Acid-Etched
6.3mm
2.7mm Ø 3.50
L
Ø3.50mm Implant Procedure Drilling Speed (RPM)
12001500
9001200
Diameter
Ø1.90
Ø2
Ø2
700900
500700
Ø2.40
Ø3
15-25 Ø3
Ø3.50
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
28.
UNO One Piece Restorative Components
UNO restorative components include an analog and a multi-purpose plastic cap, that may be used as an accurate impression coping, a temporary healing cap or as a base for a temporary restoration.
Impression coping. The impression coping combines the benefits of closed and open tray impression techniques, resulting in accurate working models and perfectly fitting restorations.
Temporary restoration. The impression coping can be used as a base for a temporary restoration by cutting off the upper section and roughening the surface. The use of non-eugenol temporary cement is recommended.
Healing cap. By cutting off the upper section, the plastic cap becomes a healing cap.
MM-OUP01 UNO One Piece implant comfort plastic cap
MO1-RSA10 UNO One Piece implant analog
Screw type range
Orthodontic Anchor Screw Length
6mm
8mm
10mm
12mm
MG2-06160
MG2-08160
MG2-10160
MG2-12160
Orthodontic Anchor Screw
Type
Titanium Alloy Ti 6Al 4V ELI
Ă˜â€‰1.60 mm
2.5
2.75
Link Tools
Link tools are specially engineered to allow simple, smooth and quick insertion or removal of Link orthodontic anchor screws. Insertion or removal may be safely and effectively accomplished by hand.
MT-TDO01
Ortho anchor pilot drill 1mm
MT-SCD20
Short cross driver for orthodontic screws
MT-LCD20
Long cross driver for orthodontic screws
MT-MSD20
Surgical adapter driver
30.
Packaging
The innovative MIS packaging system is designed for simple and easy use. All of our implant boxes feature distinctive colors, large typeface, clear data labels and a pull tab for quick opening. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Implant identification markings Quick identification markings signify: implant diameter (top), implant length (middle) and implant platform (bottom).
Pull tab Convenient pull tab facilitates easy, quick opening of the box during surgery.
Implant Label Colors
Light Gray Ø3 UNO One Piece Gray Ø3.50 UNO One Piece
Yellow Ø3.30 Narrow (SEVEN, M4) Red Ø3.75 Standard (SEVEN, M4) Blue Ø4.20 Standard (SEVEN, M4) Green Ø5 Wide (SEVEN, M4) White Ø6 Wide (SEVEN, M4)
32.
Surgical Instruments. MIS offers a full range of surgical kits and instruments, aiming to simplify surgical procedures to the benefit of both patients and clinicians.
34.
1
5
MT-TDN20
MT-P2411
Pilot Drills - External Irrigation
1.5:1
2
1:1
6
MT-P2406
1
MT-TDN20
5
Pilot drill 2mm external irrigation
MT-P2413
Pilot drill with built-in stopper dia. 2.40 height 11.5mm
Material: Stainless steel Dimensions: Length - Length 37.3 Diameter - 2mm
2
MT-P2406
Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
6
Pilot drill with built-in stopper dia. 2.40 height 6mm
3 3
7
MT-P2408
Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
MT-P2408
7
Pilot drill with built-in stopper dia. 2.40 height 8mm
1:1 MT-P2416
Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
MT-P2410
Pilot drill with built-in stopper dia. 2.40 height 10mm Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
1:1
1:1
MT-P2410
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
Pilot Drills External Irrigation
13mm Depth
1:1
16mm Depth
4
MT-P2416
Pilot drill with built-in stopper dia. 2.40 height 16mm
Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
4
MT-P2413
Pilot drill with built-in stopper dia. 2.40 height 13mm
Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm
1:1
MT-P2411
1
4
MT-TDT28
MT-TDT45
SEVEN
Twist Drills - External Irrigation
1:1
1:1
2
5
MT-TDT32
1
MT-TDT50
MT-TDT28 Twist drill 2.8mm external irrigation
4
Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.80mm
2
MT-TDT32 Twist drill 3.2mm external irrigation Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 3.20mm
1:1
3
MT-TDT40
1:1
3
MT-TDT40 Twist drill 4mm external irrigation Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 4mm
1:1
MT-TDT45 Twist drill 4.5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.50mm
5
MT-TDT50 Twist drill 5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5mm
36.
1
3
MT-TDN28
MT-TDN38
M4
Twist Drills - External Irrigation
1:1
1:1
1
2
MT-TDN28
3
Twist drill 3.80mm external irrigation
Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.8mm
Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 3.8mm
MT-TDN32
Material: Stainless steel Dimensions: Length - 37.6mm Diameter - 3.2mm
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
13mm Depth
1:1
Twist Drills External Irrigation
MT-TDN38
Twist drill 2.80mm external irrigation
Twist drill 3.20mm external irrigation
16mm Depth
2
MT-TDN32
1
3
MT-TDN45
MT-TDN55
M4
Twist Drills - External Irrigation
1:1
2
1:1
1
MT-TDN45
Twist drill 4.50mm external irrigation
MT-TDN50
Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.5mm
2
MT-TDN50
Twist drill 5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5mm 1:1
3
MT-TDN55
Twist drill 5.50mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.5mm
38.
1
3
MT-TDI28
MT-TDI38
Short Twist Drills - External Irrigation SEVEN & M4 Procedure
1:1 MT-TDI32
1
MT-TDI28
3
Twist short drill 2.80mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 2.80mm
2
MT-TDI32
Twist short drill 3.20mm 1:1
6mm Depth
8mm Depth
Twist Drills External Irrigation
10mm Depth
Material: Stainless steel Dimensions: Length - 30mm Diameter - 3.20mm
11.5mm Depth
2
1:1
MT-TDI38
Twist short drill 3.80mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 3.80mm
1
3
MT-TDI40
MT-TDI50
Short Twist Drills - External Irrigation SEVEN & M4 Procedure 1:1
1:1
2
4
MT-TDI45
MT-TDI55
1
MT-TDI40
4
Twist short drill 4mm
Twist short drill 5mm
Material: Stainless steel Dimensions: Length - 30mm Diameter - 4.0mm
2 1:1
1:1
MT-TDI45
Twist short drill 4.5mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 4.50mm
MT-TDI50
Material: Stainless steel Dimensions: Length - 30mm Diameter - 5.0mm
5
MT-TDI55
Twist short drill 5.5mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 5.50mm
40.
1
3
MT-TD280
MT-TD380
Twist Drills - Internal Irrigation SEVEN & M4 Procedure
1:1
1:1
1
MT-TD280
3
Twist drill 2.80mm internal irrigation
MT-TD320
Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.8mm
2
MT-TD320
Twist drill 3.20mm internal irrigation Material: Stainless steel Dimensions: Length - 37.6mm Diameter - 3.2mm
Twist Drills Internal Irrigation
6mm Depth
8mm Depth
10mm Depth
11.5mm Depth
13mm Depth
1:1
16mm Depth
2
MT-TD380
Twist drill 3.80mm internal irrigation Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 3.8mm
1
3
MT-TD400
MT-TD500
Twist Drills - Internal Irrigation SEVEN & M4 Procedure
1:1
1:1
2
4
MT-TD450
1
MT-TD400
3
Twist drill 4.0mm internal irrigation
MT-TD550
Twist drill 5.0mm internal irrigation
Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 4.0mm
2
1:1
1:1
MT-TD450
MT-TD500
Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.0mm
4
MT-TD550
Twist drill 4.50mm internal irrigation
Twist drill 5.50mm internal irrigation
Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.50mm
Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.5mm
42.
1
4
MT-TDN19
MT-CSN33
Marking Drills & Countersinks 1:1 1:1
2
5
MT-GDN33
MT-TD110
1
MT-TDN19
4
Marking drill 1.90mm external irrigation
Countersink for Narrow platform
Material: Stainless steel Dimensions: Length - 34mm Diameter - 1.90mm 1:1
6
2 MT-GDN50
Material: Stainless steel Dimensions: Length - 31mm Ø3.30mm
5
Marking drill 1.90mm internal irrigation
1:1
3
MT-TD110
3
1:1
MT-SMD10
MT-GDN33
Countersink for Standard platform
Material: Stainless steel Dimensions: Length - 34mm Diameter - 1.90mm
MT-SMD10
MT-CSN33
Material: Stainless steel Dimensions: Length - 26mm Ø3.75mm/ Ø4.20mm
6
MT-GDN50
Spade marking drill
Countersink for Wide platform
Material: Stainless steel Dimensions: Length - 27.5mm
Material: Stainless steel Dimensions: Length - 26.8mm Ø5mm / Ø6mm
1:1
MT-GDN50 Countersink for Wide platform
1
3
MT-00400
MT-00600
Trephine Burs
1:1
2
1:1
MT-00500
1
MT-00400
3 4
Trephine bur 4mm
Trephine bur 6mm
Material: Stainless steel Dimensions: Length - 37mm Inner Ø4mm Outer Ø5mm
2
1:1
MT-00600
Material: Stainless steel Dimensions: Length - 37mm Inner Ø6mm Outer Ø7mm
MT-00500
Trephine bur 5mm Material: Stainless steel Dimensions: Length - 37mm Inner Ø5mm Outer Ø6mm
1
3
MT-CRD21
MT-CRD28
Ceramic Drills External Irrigation
1:1
2
1:1
MT-CRD20
1:1
Ceramic Drill features include: reduced vibration, smooth operation, and continuous substance removal. MIS Ceramic Drills are made of a high performance mix of Zirconia (Zirconium oxide) and Alumina (Aluminum oxide) ceramics. Advantages: Free of metal ,biocompatible, corrosion free, wear resistant (usage between 50 to 100 drills), above average bending strength compared with other ceramic drills, requires approx. half the torque of steel drills.
1
MT-CRD21
Ceramic marking drill dia. 2.10mm Material: Ceramic Dimensions: Length - 28.5mm Diameter - 2.10mm
2
MT-CRD20
Ceramic pilot drill dia. 2mm Material: Ceramic Dimensions: Length - 33.5mm Diameter - 2mm
3
MT-CRD28
Ceramic twist drill dia. 2.80mm Material: Ceramic Dimensions: Length - 35mm Diameter - 2.80mm
44.
1
4
MT-HKS15
MT-UMS21
Surgical Tools - UNO
1:1
2
MT-HKL21
1:1
5
MT-UML21
1:1
3
1
MT-HKO21
MT-HKS15
4
UNO One Piece implant short key
MT-UMS21 UNO One Piece implant motor adapter, short
Material: Stainless steel Dimensions: Length - 12mm
Material: Stainless steel Dimensions: Length - 22mm
1:1
2
1:1
3
MT-HKL21
MT-UML21 UNO One Piece implant motor adapter, long
Material: Stainless steel Dimensions: Length - 17mm
Material: Stainless steel Dimensions: Length - 30mm
MT-HKO21
UNO One Piece implant insertion tool Material: Stainless steel Dimensions: Length - 18.8mm
MT-HKO21 UNO One Piece implant insertion tool
5
UNO One Piece implant long key
1
6
MT-PP001
MT-SRA10
Surgical Tools 1:1 1:1
2
7
MT-NRH20
MT-HW001
1
1.5:1
3
MT-HSI10
1:1
8
MT-SHA10
2
MT-PP001
6
Square connection to ratchet adapter
Material: Stainless steel Dimensions: Length - 24mm Ă˜2mm / Ă˜3.20mm
Material: Stainless steel Dimensions: Length - 15.50mm
MT-HW001
7
Hand wrench
4
MT-HLI10
Material: Stainless steel Dimensions: Length - 25mm
1:1
9
3
MT-HSI10
8
Short insertion tool, int. hex. connection
MT-MRH10
4
5
Material: Stainless steel Dimensions: Length - 15.6mm
9
Long insertion tool, int. hex. connection
1:1
10
MT-HLI10
MT-MRH10
Hex. ratchet short adapter for int. hex. connection
Material: Stainless steel Dimensions: Length - 28.2mm
MT-MRH20
MT-SHA10
Hand wrench square connection
Material: Stainless steel Dimensions: Length - 24.4mm
1:1
MT-NRH20
Hex. ratchet long adapter for int. hex. connection, NP
Material: Stainless steel Dimensions: Length - 13mm 1:1
MT-SRA10
Parallel pin
Material: Stainless steel Dimensions: Length - 19mm
MT-DE001
5
MT-DE001
Drill extender Material: Stainless steel Dimensions: Length - 28.85mm 1:1
1:1
MT-SHA10 Hand wrench, square connection
10
MT-MRH20
Hex. ratchet long adapter for int. hex. connection Material: Stainless steel Dimensions: Length - 25mm
46.
1
5
MT-HDS30
MT-TP500
1:1
2
MT-HDL30
6
MT-DI001
1:1 1:1
3
Surgical Tools
1:2
7
1
MT-HDS30
5
Short hex. drive 0.05"
Tissue punch
MT-HMR05
Material: Stainless steel Dimensions: Length - 16mm
MT-SM005
2
MT-HDL30
Material: Stainless steel Dimensions: Length - 28mm Inner - Ă˜4.5mm
6
Long hex. drive 0.05" 1:1
8
Implant direction indicator
Material: Stainless steel Dimensions: Length - 22mm
3
Material: Stainless steel Dimensions: Length - 17mm
MT-SM005
7
Short motor adapter for 0.05" hex.
MT-LM005
4 1:1
MT-LM005
Long motor adapter for 0.05" hex. Material: Stainless steel Dimensions: Length - 30mm
MT-HMR05
Short direct hand and ratchet hex. key
Material: Stainless steel Dimensions: Length - 24mm
1:1
MT-DI001
MT-HMR10
1:1
4
MT-TP500
Material: Stainless steel Dimensions: Length - 20.5mm
8
MT-HMR10
Long direct hand and ratchet hex. key Material: Stainless steel Dimensions: Length - 25mm
Prosthetic hex. driver
2
3 1
1 Prosthetic hex. driver for hand key adapter 2 Prosthetic hex. driver for ratchet adapter 3 Prosthetic hex. driver for motor
48.
1
4
MT-MSD20
MT-MAL10
Surgical Instruments
1:4
2
MT-RI030
1
MT-MSD20
4
1:5
5
MT-BTI10
1:2 MT-RI040
3
MT-RI030
1:3 MT-TP420
1:2
1:1
MT-RI040
Torque wrench
5
MT-BTI10
Ratchet wrench
Implant site depth probe 6/8/10/11.5/13/16mm
Material: Stainless steel Dimensions: Length - 75mm
Material: Stainless steel Dimensions: Length - 100mm Ø1.80mm / Ø2.70mm
MT-RI040
Torque wrench
6
Material: Stainless steel
Material: Stainless steel + Aluminum Dimensions: Length - 140mm
2
3
MT-MAL10
Mallet with solid plastic insert
Surgical adapter driver
Material: Stainless steel Dimensions: Length - 108mm
6
MT-TP420
Tissue punch dia. 4.20mm Material: Stainless steel Dimensions: Length - 29.50mm Inner - Ø4.2mm
Torque Ratchet Kit
MT-RI050 The new premium Torque Wrench ďŹ ts all MIS insertion tools and adapters. It is designed for convenient grip, accurate torque transfer and simple assembly and disassembly; to facilitate effortless cleaning and maintenance.
Ratchet mode option Wide torque range 15 - 70 Ncm
Adjustment key
Lubricant tube
50.
Kits. MIS has dedicated years of collaboration with clinicians in order to develop our state-of-the-art surgical kits. Engineered with the aim of streamlining surgical procedures, MIS kits are designed to simplify standard procedures and provide creative solutions for all your clinical needs.
52.
SEVEN Advanced Surgical Kit
The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant placement procedures. The kit is designed to enhance simplicity and safety; featuring a novel ergonomic design that follows the surgical drilling sequence for a more efficient procedure. A set of length-based pilot drills include color coded visual indicators for both implant diameters and restorative platforms.
MK-EI48 Advanced Surgical Kit for the SEVEN implant system with external irrigation drills
Kit Contents Surgical kit for the SEVEN implant system with external irrigation drills
MK-EI48
Kit content: Pcs:
Pcs:
Pcs:
Pcs:
1
1
1
1
MT-SMD10
MT-TDT32
Spade marking drill
Twist drill 3.2mm external irrigation
1
MT-TDN19
MT-GDN33
MT-TDT40
Marking drill 1.90mm external irrigation
Long insertion tool, int. hex. connection
Body try-in 5mm 1
1
MT-HLI10
MT-BTT50
1
MT-HSI10
Countersink for standard platform
Twist drill 4mm external irrigation
Short insertion tool, int. hex. connection
1
1
1
MT-P2406
MT-GDN50
MT-TDT45
Pilot drill with built-in stopper dia. 2.40 height 6mm
Countersink for wide platform
Twist drill 4.5mm external irrigation
1
MT-SHA10
1 1
1
Hand wrench square connection
MT-NRH20
MT-P2408
MT-TDT50
Pilot drill with built-in stopper dia. 2.40 height 8mm
Twist drill 5mm external irrigation
Hex. ratchet long adapter for int. hex. connection, NP
1
MT-DE001 Drill extender
1 1
1
MT-P2410
MT-BTT24
Pilot drill with built-in stopper dia. 2.40 height 10mm
Body try-in 2.4mm
MT-MRH20 Hex. ratchet long adapter for int. hex. connection
1
MT-SM005 Short motor adapter for 0.05" hex.
1 1
1
Long direct hand and ratchet hex. key
Body try-in 2.8mm
Pilot drill with built-in stopper dia. 2.40 height 11.5mm
Long motor adapter for 0.05" hex.
Parallel pin dia. 2.40/3mm for tapered impl. procedure
Body try-in 3.20mm
Pilot drill with built-in stopper dia. 2.40 height 13mm
MT-LM005
MT-PP240
MT-BTT32
MT-P2413
1
1
1
1
MT-HMR10
MT-BTT28
MT-P2411
1
MT-RI030 Ratchet wrench 1
1
1
MT-BTT40
MT-P2416
Implant direction indicator
1
1
1
MT-DI001
Body try-in 4mm
Pilot drill with built-in stopper dia. 2.40 height 16mm
MT-TDT28
MT-BTT45
Twist drill 2.8mm external irrigation
Body try-in 4.50mm
MT-SRA10
Square connection to ratchet adapter
54.
M4 Advanced Surgical Kit
MIS M4 implants combine the benefits of cylindrical and conical implant designs, with the aim of achieving excellent primary stability for every clinical scenario. Two main features of M4 implants include the self-tapping, V-shaped thread design with three spiral channels – allowing for smooth insertion even in type 1 bone conditions, and a flat, cutting, tapered apex – enabling instantaneous grip into bone for immediate placement procedures.
MK-0016 M4 Advanced Surgical Kit
Kit Contents M4 Advanced Surgical Kit
Kit Contents: Pcs:
Pcs:
Pcs:
1
1
1
MT-SMD10
MT-DE001
Spade marking drill
MT-MRH25
Drill extender
Hex. ratchet long adapter for int. hex. connection
1
1
MT-TDN19
MT-SRA10
1
Square connection to ratchet adapter
Marking drill 1.90mm external irrigation
MT-SHA10 Hand wrench square connection
1 1
MT-SM005 MT-P2416 Pilot drill with built-in stopper dia. 2.40 height 16mm
Short motor adapter for 0.05" hex.
MT-RI030
1
MT-LM005 1
Long motor adapter for 0.05" hex.
MT-TDN28 Twist drill 2.8mm external irrigation
1
MT-HSI10 Short insertion tool, int. hex. connection
1
MT-TDN32 Twist drill 3.2mm external irrigation
1
MT-HLI10 Long insertion tool, int. hex. connection
1
MT-TDN38 Twist drill 3.8mm external irrigation
1
MT-CSN33 Countersink for narrow platform
1
MT-TDN45
1
Twist drill 4.5mm external irrigation
MT-GDN33 Countersink for standard platform
1
1
MT-TDN50
MT-GDN50
Twist drill 5mm external irrigation
Countersink for wide platform 1
1
MT-TDN55 Twist drill 5.5mm external irrigation
1
MT-PP240 Parallel pin dia. 2.40/3mm for tapered impl. procedure
Ratchet wrench
MK-0016
56.
M4 Drilling Set
MK-0014 In order to Make It Simple, the innovative M4 implants Drilling Set was designed as an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor has a full range of drills and tools necessary to complete both M4 and SEVEN implant placement procedures.
MK-0014 M4 Drilling Set
Kit Contents: MT-CSN33
MT-TDN28
MT-TDN45
Twist drill 2.8mm external irrigation
Twist drill 4.5mm external irrigation
Countersink for narrow platform
MT-TDN32
MT-TDN50
MT-GDN33
Twist drill 3.2mm external irrigation
Twist drill 5mm external irrigation
Countersink for standard platform
MT-TDN38
MT-TDN55
MT-GDN50
Twist drill 3.8mm external irrigation
Twist drill 5.5mm external irrigation
Countersink for wide platform
Yeung Bone Harvest Kit
MK-BH26 The Bone Harvest Kit enables, simple and easy bone harvesting during surgery. It provides a revolutionary dual-action bone harvesting system while drilling; the harvested bone can be used elsewhere as needed. the drills can also be used as final drills.
Drill Color-coded drill matches sleeve color.
Simple. The bone accumulates inside the drill slots during drilling. Easy. The Bone Harvest drills can be used as final drills while harvesting bone. Safe. The Bone Harvest Kit can be used with MIS drill stoppers, to assure a safe drilling procedure.
Recommended speed is between 20-50 RPM without irrigation. Drill with a slight continuous pressure. While removing the drill, continue rotation to keep the bone inside the drill slots. Drills should not be used more than 30 times.
Kit Contents The Bone Harvest Kit includes:
MT-BC280
Ø2.80mm
MT-BC320
Ø3.20mm
MT-BC380
Ø3.80mm
MT-BC450
Ø4.50mm
58.
SEVEN Standard Platform Stoppers Kit
MK-BS001 Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.
Stoppers Four sleeves for each diameter in 8, 10, 11.5 and 13mm lengths, color-coded according to drills
Box Tray can be removed from the box for ease of use
Scale
Teflon IN Insert
Teflon OUT Insert
Simple. Quick, easy assembly Easy. Color-coding for quick identification of the sleeve diameter Safe. Safe drilling to desired depth Clear. Clearly arranged depth sleeves for 8 to13mm for two diameters: Ø2.8 and Ø3.2mm
Kit Contents
Ø2.80 stoppers (for Ø3.75mm implants)
Ø3.20 stoppers (for Ø4.20mm implants)
SEVEN Drill Stoppers Kits - Depth-Based
MK-SDS** Following the use of the MIS length-based pilot drills, the SEVEN Drill Stoppers Length Kits enable safe and easy drilling to the exact desired depth. 5 different Stoppers Kits are available in lengths: 6, 8, 10, 11.5 and 13mm.
Stoppers Five sleeves 2.8, 3.2, 4, 4.5 and 5mm diameters, color-coded according to drills
Box Tray can be removed from the box for ease of use
13mm 11.5mm 10mm 8mm Desired drilling depth
Scale
Teflon IN Insert
Teflon OUT Insert
Simple. Quick, easy assembly
Kit Contents
For 6mm implants
MK-SDS06
Easy. Color-coding for a quick identification of sleeve diameter Safe. Safe drilling to desired depth Clear. Clearly arranged depth sleeves for Ă˜2.8mm to Ă˜5mm diameter drills
For 10mm implants
MK-SDS10
For 11.5mm implants
MK-SDS11
For 8mm implants
MK-SDS08
For 13mm implants
MK-SDS13
60.
Abrahami Drill Guide Kit
MK-0011 The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.
MK-0011 Abrahami Drill Guide Kit
Simple and logical
Stabilization
Optimal parallelism
Ideal distance measurement from adjacent teeth
Variable distance options
Location Pins Ă˜2mm Short 10mm Long 16mm
Location Pins Ă˜2.80mm Screw
Short 10mm Long 16mm Spring
Extension Arms Ball
6, 7, 8mm 9, 10, 11mm Location pin
12, 13, 14mm
Paralleling Pin 20mm
Before cleaning, the Location Pins must be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential in order to avoid erosion of the parts and to maintain efficient functioning of the system.
62.
Bone Compression Kit
MK-0020 The MIS Bone Compression Kit is designed to enhance primary stability and increase immediate bone-to-implant contact in mainly type 3 and type 4 bone conditions.
MK-0020 Bone Compression Kit
kit is not designed for ridge widening.
Kit Contents Bone Compression Kit
Kit Contents: Pcs:
Pcs:
1
1 1
MT-SMD10
MO-CO160
Spade marking drill
MO-SO300
Convex compression screw Ø1.80-Ø2.90mm
1
MT-HSI10
Pcs:
Convex compression screw Ø3mm
1 1
Short insertion tool, int. hex. connection
MO-CO200 MO-SO350
Convex compression screw Ø2.30-Ø3.30mm
1
Convex compression screw Ø3.50mm
MT-HLI10 Long insertion tool, int. hex. connection
1
1
MO-CO240 Convex compression screw Ø2.70-Ø3.70mm
1
MT-SHA10 Hand wrench square connection
1
MO-CO280 Convex compression screw Ø3.1-Ø4.50mm
1
MT-SRA10
Square connection to ratchet adapter
1
MT-RI030 Ratchet wrench
MO-SO400 Convex compression screw Ø4mm
MK-0020
64.
UNO Implant Surgical Kit
UNO One Piece implants are placed using specially designed tools that fit the implant prosthetic part. The kit includes surgical drills, placement keys and a ratchet wrench.
MK-0036 UNO Implant Surgical Kit
Kit Contents UNO Implant Surgical Kit
Kit Contents: Pcs:
Pcs:
Pcs:
1
1
1
MT-SMD10
MT-UML21
Spade marking drill
UNO One Piece implant motor adapter, long
1
MT-TDN20
MT-HKO21
UNO One Piece implant insertion tool
1
MT-PP001
Pilot drill 2mm external irrigation
Parallel pin
1
MT-RI030
1
MT-P2416 Pilot drill with built-in stopper dia. 2.40 height 16mm 1
MT-TDT30 Twist drill 3mm external irrigation 1
MT-BTT20 Body try-in 2.0mm
1
MT-BTT24 Body try-in 2.4mm
1
MT-BTT30 Body try-in 3.0mm
Ratchet wrench
1
MT-HKL21 UNO One Piece implant long key
MK-0036
66.
Prosthetic Tools Kit
MK-0039 The MIS Prosthetic Tools Kit consists of tools required for standard restorative procedures. The kit includes a torque wrench, a locator placing tool and MIS hex. drivers and implant indicators. In addition, the kit includes an abutment holder system for improved handling and easier abutment adjustments.
MK-0039 Prosthetic Tools Kit
Kit Contents
Kit Contents: Pcs:
Pcs:
Pcs:
1
1
1
MM-LSD15
MT-HDS30
Locator torque wrench driver short
MT-HDL30
MM-LSD21
MT-DI001
MT-BK235
1
1
MT-IE172
Internal connection abutment extractor
MT-SMK13
MT-MUK02
Short motor key adapter 0.05"
Multi-Unit key
1
MT-IT100 1
1
MT-HHR07
Short hand screwdriver for 0.05" hex. 1
MT-HHR13
Long hand screwdriver for 0.05" hex.
MT-LMK13
Long motor key adapter 0.05"
Locator core tool
Wide int. hex. Implant analog for universal hand driver
1
1
MM-LCT10
MT-UW002
implant direction Indicator
Ball attachment anchor key
Torque wrench
1
1
4
1
MT-RI040
Standard Int. hex. Implant analog for universal hand driver
Long hex. drive 0.05"
Locator torque wrench driver long
1
MT-US002
Short hex. drive 0.05"
1
1
Pcs:
Closed tray impression coping key
MT-MSD20
Surgical adapter driver
68.
Sinus Lift Osteotomes Set
MK-0023 The MIS Sinus Lift Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet concave tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
Concave 6mm
11mm
15mm
MK-0023 Sinus Lift Osteotomes Set
Convex Osteotomes Set
MK-0024 The MIS Convex Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet convex tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
Convex 6mm 11mm 15mm
MK-0024 Convex Osteotomes Set
70.
MIS offers a comprehensive line of kits for every clinical scenario and matched to every MIS implant system and procedure. The kits are expertly designed to enhance convenience, safety and simplicity.
SURGERY KITS
M4
SEVEN
13
9
7
Bone Compression Kit
Abrahami Drill Guide Kit
Zircon Diamond Burr Set
14
8
7
5
5
UNO Surgical Kit
10
PROSTHETIC KITS
5
PROSTHETIC COMPONENT
MGUIDE Surgical Kit
Prosthetic Kit
CPK
2
4
6
9
TI-BASE Kits
6
6
4
Drills
Keys
Accessories
MIS Manual Kits
5
25
Yeung Bone Harvest Kit
4
Stoppers Kit
24
Prosthetic Planning Kit
OT Equator Kits
MGUIDE Tools Kit
8
Zirconia Prosthetic Abutments
10
Osteotomes Set
5
Abutment Holding System Kit
3
8
3
72.
Prosthetic Options. MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions for both screw retained and cement retained restorations. The MIS temporary plastic abutments are made of PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up to 6 months. In an effort to continuously develop our range of superstructures, MIS offers new Titanium Base abutments, compatible with most CAD/CAM systems software. The new abutments meet the specific requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options, the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and aesthetic implant supported restorations.
1
5
MN-RSM10
MN-IT300
NARROW
2
6
MN-IT100
Analog and Impression Copings
1.5:1
1.5:1 MN-I0330
1
MN-RSM10
5
Implant analog internal hex. NP 1.5:1
3
7
MN-G0160
Direct impression coping Set for closed tray NP
Material: Stainless steel Dimensions: Length - 12mm
1.5:1
MN-GP100
2
MN-IT100
Material: Titanium Dimensions: Height - 7.8mm
6
Direct impression coping for closed tray NP
4
3
MN-GP100
Direct impression coping guide pin Internal hex. NP
MN-PF330
1.5:1
Material: Titanium Dimensions: Length - 16.5mm
4
MN-PF330
Direct press fit for closed tray NP 1.5:1
MN-IT300 Direct impression coping set for closed tray, NP
Material: Titanium Dimensions: Length - 11mm
MN-I0330
Direct impression coping for open tray Internal hex. NP
Material: Stainless steel Dimensions: Height - 9mm 1.5:1
MN-IT300
Material: Stainless steel Dimensions: Height - 11mm
7
MN-G0160
Direct impression coping guide pin internal hex. Material: Titanium Dimensions: Length - 21mm
74.
1
MN-CPK61
2
MN-RSM60
3
MN-CHC60
NARROW
NPK - Narrow Prosthetic Kits MK-NPK61 5 4
MN-IC600
5
MN-IC040
6
MN-ICH40
1
MN-CPK61
2
MN-RSM60
3
MN-CHC60
4
MN-IC600
5
MN-IC040
6
MN-ICH40
Anatomic 1mm transgingival abutment, crown height 6mm, NP
Abutment analog crown height 6mm, NP
Plastic healing cap crown height 6mm, NP
Direct Impression coping plastic cap, NP
Burnout plastic cap, NP
Burnout anti-rotation plastic cap, NP
MK-NPK61 1mm Narrow prosthetic kit, crown height 6mm, NP
NARROW
NPK - Narrow Prosthetic Kits
C=4mm H=1,2,3,4mm
C=6mm H=1,2,3,4mm
} }
Kit Options:
1
MK-NPK41
6
MK-NPK42
6
MK-NPK43
6
MK-NPK44
6
MK-NPK61
6
MK-NPK62
6
MK-NPK63
6
MK-NPK64
1mm Narrow prosthetic kit, crown height 4mm, NP 2mm Narrow prosthetic kit, crown height 4mm, NP 3mm Narrow prosthetic kit, crown height 4mm, NP 4mm Narrow prosthetic kit crown height 4mm, NP 1mm Narrow prosthetic kit crown height 6mm, NP 2mm Narrow prosthetic kit, crown height 6mm, NP 3mm Narrow prosthetic kit, crown height 6mm, NP 4mm Narrow prosthetic kit, crown height 6mm, NP C=Crown Height H=Gingival Height
Transgingival Abutment, NP
C
H
All CPK abutments can be purchased separately. They are provided with with a burnout anti-rotation plastic cap (MN-ICH40).
MN-CPK41* MN-CPK42* MN-CPK43* MN-CPK44* MN-CPK61* MN-CPK62* MN-CPK63* MN-CPK64*
C=4mm H=1,2,3,4mm
C=6mm H=1,2,3,4mm
76.
1
4
MN-CP013
MN-S0160
NARROW
Direct, Screw Retained Restoration Options
1.5:1
5
MN-GP010
1.5:1
2
MN-CPH13
1 1.5:1
1.5:1
3
6
MN-TPA12
MN-GPC10
2
1.5:1
MN-CP013
4
MN-S0160
Direct plastic cylinder Internal hex. without hex. NP
Direct prosthetic screw internal hex. NP
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 3.50mm
Material: Titanium Dimensions: Length - 7.6mm 30 Ncm
MN-CPH13
5
MN-GP010
Direct plastic cylinder internal hex. with hex. NP
Direct gold plastic cylinder without hex. internal hex. NP
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 3.50mm
Material: Burnout Plastic + gold -a Dimensions: Height - 15.5mm Diameter - 4.50mm
1.5:1
3
MN-TPA12
Narrow profile temporary plastic abutment, NP Material: Peek Dimensions: Height - 11mm Diameter - 3.50mm
The �functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection. Please note: PEEK abutments are radiolucent!
6
MN-GPC10
Direct gold plastic cylinder with hex. internal hex. SP Material: Dimensions: Height - 15.5mm Diameter - 4.50mm
1
3
MN-MAC10
MN-S0160
NARROW 1.3:1 1.5:1
2
4
Cemented Restoration Options
MN-TPA10
MN-AN020
1.5:1
1
MN-MAC10
3
Cementing post, NP
Direct prosthetic screw internal hex. NP
1.5:1 Material: Titanium Dimensions: Height - 11mm
2
MN-AN020
20 degree angulated abutment Internal hex. NP Material: Titanium Dimensions: Height - 8mm
MN-TPA10 Temporary plastic abutment, NP
MN-S0160
Material: Titanium Dimensions: Length - 7.6mm 30 Ncm
4
MN-TPA10
Temporary plastic abutment, NP Material: Peek Dimensions: Height - 11mm Diameter - 4mm
78.
1
MN-S0160
2
3
MN-TB001
MN-RSM10
NARROW
CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4
Hexagon Connection
(with anti-rotation mechanism)
GI-SCH11
1
MN-S0160
2
MN-TB001
3
MN-RSM10
4
GI-SCH11
Direct prosthetic screw internal hex. Narrow platform
Ti Base internal hex. connection for CAD/CAM, Narrow platform
Implant analog internal hex. Narrow platform
Burnout anti-rotation plastic cap for Ti Base, Standard platform
Hex.
MK-TBN4 Ti Base kit h. 4mm for internal hex. connection, NP
For Laboratory Use Only!
Scan abutment
MN-SP001
Scanning abutment internal hex. connection, Narrow platform
MN-S0160
Direct prosthetic screw internal hex. Narrow platform
MK-TBN4
1
MN-S0160
2
MN-TB002
3
MN-RSM10
NARROW
CAD/CAM Ti Base Kit Multi-Unit Restoration Non-Hexagon Connection 4
MK-MUN4
(without anti-rotational mechanism)
GI-SCH11
1
MN-S0160
2
MN-TB002
3
MN-RSM10
4
GI-SCH11
Direct prosthetic screw internal hex. Narrow platform
Multi Unit Ti-Base internal hex. connection, Narrow platform
Implant analog internal hex. Narrow platform
Burnout anti-rotation plastic cap for Ti-Base, Standard platform
Non-Hex.
MK-MUN4 Multi Unit Ti Base kit h. 4mm internal hex. connection, NP
For Laboratory Use Only!
Scan abutment
MN-SP001
Scanning abutment internal hex. connection, Narrow platform
MN-S0160
Direct prosthetic screw internal hex. Narrow platform
80.80.
NARROW
kit OT Equator Kits
Laboratory Use: Metal housing
OT Equator laboratory cap (black)
}
H=1,2,3,4,5mm
Clinical Use: Metal housing
Kit Options:
MK-NOE1
OT Equator internal hex. kit, gingival height 1mm, NP
MK-NOE2
OT Equator internal hex. kit, gingival height 2mm, NP
MK-NOE3
OT Equator Internal hex. kit, gingival height 3mm, NP
MK-NOE4
OT Equator internal hex. kit, gingival height 4mm, NP
MK-NOE5
OT Equator internal hex. kit, gingival height 5mm, NP
Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01
Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01
Standard retention (white) OT Equator cap (1.8kg) OE-RCW01
High retention (violet) OT Equator cap (2.7kg) OE-RCV01
2.6mm
1.7mm
OT Equator retention caps may be purchased separately.
Equator
Ball Attachment
OT Equator Tools
MT-LM005
Long motor adapter for 0.05" hex.
MT-SM005
Short motor adapter for 0.05" hex.
OT Equator Abutments
Ø2.5mm Ø2.5mm 1.7mm 1.7mm 2mm
1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection Ø2.5mm Ø2.5mm 1.7mm 1.7mm
OE-RSM60
3mm
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.7mm
5mm
ET-IT001
OT Equator handling tools
4mm
82.
1
MN-S0160
2
MN-IN060
3
MM-SIZW6
NARROW
Non-Cemented Zircon Prosthetic Abutments 5
1
MN-S0160
2
Zircon incisor 15ยบ abutment set int. hex., NP
1
MN-S0160
2
MN-IN060
3
MM-SIZW6
MK-NIZ6
Direct prosthetic screw internal hex.
Incisor esthetic Ti abutment internal hex., NP
Incisor white Zircon crown, SP / NP
MN-CIZ60
NARROW
Pre-Cemented Zircon Prosthetic Abutments 5
Zircon cemented incisor 15ยบ abutment set int. hex., NP
1
MN-S0160
2
MN-CIZ60
Direct prosthetic screw internal hex.
Incisor TiZi abutment internal hex., NP
MK-NIC6
NARROW
Zircon Abutment Kits
Kit Options:
}
MK-NIZ6
Zircon incisor 15ยบ abutment set internal hex., NP
MK-NIC6
Zircon cemented incisor 15ยบ abutment set internal hex., NP
Zircon cemented incisor 15ยบ abutment set int. hex., NP
Zircon incisor 15ยบ abutment set int. hex., NP
8.5mm
2mm
Zircon abutments cannot be purchased separately. They are provided with direct prosthetic screw internal hex. (MN-S0160).
1mm
84.
1
9
MB-N2330
MB-PR010
NARROW 3:1 1.5:1
2
10
Ball Attachment System
MB-TBS10
MB-N3330
3:1
11
MB-TBS20
3:1 1.5:1
3
12
MT-TSD10
1
MB-N2330
9
Ball attachment anchor internal hex. 2mm, NP
MB-N4330
Plastic mounting sleeve
Material: Titanium Dimensions: Height - 2mm
2
1.5:1
4
13
MB-DMH10
3
MB-RS375
14
2:1
15
Titanium ball cap spring soft Material: Steel Dimensions: Diameter - 2.6mm
MT-NB225
12
MT-TSD10
Ball attachment anchor key
Screw driver for titanium ball cap
Material: Stainless steel Dimensions: Length - 22mm
Material: Stainless steel Dimensions: Length - 60mm
2:1
16
MB-DB235
5
MB-RS375
13
MB-DMH10
Double metal housing
Ball attachment analog Internal hex.
1.5:1
8
MB-TBS20
MB-PPR10
1.5:1 MB-GPS10
11
Material: Titanium Dimensions: Height - 4mm
4
7
Material: Steel Dimensions: Diameter - 2.5mm
MB-PPC10
1:1 MB-SF200
MB-N4330
MB-TBS10
Titanium ball cap spring standard
Ball attachment anchor Internal hex. 4mm, NP 1:1
6
10
Material: Titanium Dimensions: Height - 3mm
1:1.5
5
Material: Plastic Dimensions: Length - 2mm Diameter - 3.8mm
Ball attachment anchor internal hex. 3mm, NP
1:2
MT-NB225
MB-N3330
MB-PR010
Material: Stainless steel Dimensions: Length - 15.1mm
MB-TTP10
1:1 1.5:1
6
MB-SF200
14
Material: Plastic Dimensions: Length - 2.6mm Retention 1200-1300g
Material: Plastic Dimensions: Length - 3.5mm
Ă˜2.25mm
7
MB-GPS10
15
Gold ball cap
8
MB-TTP10
Titanium ball cap
MB-PPR10
Soft plastic cap for metal housing
Material: Gold-e Dimensions: Length - 2.4mm
2.6mm
MB-PPC10
Standard plastic cap for metal housing
Plastic ball cap
Material: Plastic Dimensions: Length - 2.6mm Retention 800-950g
16
MB-DB235
Plastic disc for ball attachment
0.55mm Material: Titanium Dimensions: Length - 3.1mm
Gingival leight 2,3,4mm
Material: Plastic Dimensions: Diameter - 15mm
MB-N2330 Ball attachment anchor internal hex. 2mm, NP
Although the visual features a SEVEN implant, the abutment fits all MIS narrow internal hex. implants.
1
8
MB-NZL00
MM-LCT10
NARROW 1:1
2
Locator Attachment System
MB-NZL01
1:1
3
MB-NZL02
1:1.5
9
MM-LMP02
1
1:1
4
MB-NZL03
10
2
MB-NZL01
Material: Steel / Titanium Nitride coated Ti
9
Locator abutment 1.0mm hgt, NP
MM-LFA40
6
MB-NZL05
1:1.5
3
MB-NZL02
Material: Steel/ Nylon Dimensions: Length - 1.80mm
10
Locator abutment 2.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 2mm
MB-NZL06
4
MB-NZL03
Locator abutment 3.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 3mm
1:1
5
MM-LIC10
Locator impression coping (4 Pack) Material: Aluminum polyethylene Dimensions: Length - 4.50mm Diameter - 4.70mm
1:1
7
MM-LMP02
Locator male processing package (2 Pack)
Material: Titanium Nitride coated Ti Dimensions: Height - 1mm 1:1
MM-LCT10
Locator core tool
Material: Titanium Nitride coated Ti Dimensions: Height - 0mm 1:1.5
11
MB-NZL04
8
MM-LIC10
1:1
5
MB-NZL00
Locator abutment 0mm hgt., NP
1:1.5
11
MM-LFA40
Locator female analog 4mm dia. (4 Pack) Material: Aluminum Dimensions: Length - 10.40mm Diameter - 4mm
MB-NZL04
Locator abutment 4.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 4 mm
6
MB-NZL05
Locator abutment 5.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 5mm
7 1.78mm
Gingival height 0-6mm
MB-NZL06
Locator abutment 6.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 6mm
Note: Locator selection should be based on gingival height
MB-NZL03 Locator Narrow abutment 3.0mm
Although the visual features a SEVEN implant, the abutment fits all Narrow internal hex. implants.
86.
1
6
MM-LRM10
MM-LPP10
NARROW 1:1
2
MM-LLR10
2
MM-LRM10
1:1
7
MM-LBP10
8
MM-LSD15
1:1
1:1
3
MM-LEL10
3
MM-LLR10
1:1
Locator Attachment System
1
1:1
4
MM-LER10
4
MM-LEL10
1:1
5
MM-LELE1
5
MM-LER10
9
MM-LSD21
2
1:1
MM-LLR10
Material: Polyethylene Black Dimensions: Length - 15mm Diameter - 4.60mm
7
Material: Polyethylene Black Dimensions: Length - 1.80mm Diameter - 4.60mm
Material: Nylon Pink Dimensions: Length - 1.80mm Diameter - 4.70mm
3
MM-LELE1
MM-LEL10
8
1.5:1
4
Locator torque wrench driver short
Material: Nylon Blue Dimensions: Length - 1.80mm Diameter - 4.70mm
Material: Stainless steel Dimensions: Length - 15mm
MM-LER10
9
MM-LSD21
Locator extended range (4 Pack)
Locator torque wrench driver long
Material: Nylon Green Dimensions: Length - 1.80mm Diameter - 4.70mm
Material: Stainless steel Dimensions: Length - 21mm
10°-20°*, 3-4 lbs**, 1.36-1.82 kg**
5
MM-LSD15
Locator extra-light retention
(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg** 1:1
MM-LBP10
Locator black processing replacement male (4 Pack)
(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg**
1:1
MM-LPP10
Locator parallel post (4 Pack)
Locator light retention
1:1
6
6
Material: Material: Nylon Aluminum Dimensions: Length Dimensions: Length -- 1.80mm 10.40mm Diameter Diameter -- 4.70mm 4mm
1.5:1 1:1
MM-LFA40 MM-LRM10
Locatorreplacement female analog 4mm Locator male clear (4 Pack) 0°-10°*, 5 lbs**, 2.27 kg** dia. (4 Pack)
MM-LELE1 Locator extra light-extended
(4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg** Material: Nylon Red Dimensions: Length - 1.80mm Diameter - 4.70mm
* For the correction of axes divergences for one implant ** Retention strength
1
5
MD-IT100
MD-IT300
STANDARD
Analog and Impression Copings 1.5:1 1.5:1
2
6
MD-PF375
MD-GP100
1
1.5:1 1.5:1
3
7
Direct impression coping for closed tray internal hex. SP
5
2
MD-GP100
Material: Titanium Dimensions: Height - 8mm
6
Direct impression coping guide pin Internal hex.
3
MD-I0375
Direct impression coping for open tray internal hex. SP Material: Stainless steel Dimensions: Height - 11mm
1.5:1
4
MD-G0213
4
MD-G0213
Direct impression coping guide pin Internal hex. Material: Titanium Dimensions: Length - 21.3mm
1.5:1
MD-IT100 Direct impression coping for closed tray internal hex. SP
MD-PF375
Press fit impression coping for closed tray, SP
Material: Titanium Dimensions: Length - 16.5mm
1.5:1
MD-IT300
Direct impression coping for closed tray internal hex.
Material: Stainless steel Dimensions: height - 9mm
MD-RSM10
MD-I0375
MD-IT100
Material: Titanium Dimensions: Height - 11mm
7
MD-RSM10
Implant analog internal hex. SP Material: Stainless steel Dimensions: Length - 12mm
88.
1
MD-CPK61
2
MD-RSM60
3
MM-CHC60
STANDARD
CPK - Complete Prosthetic Kit MK-CPK61 5 4
MD-IC800
5
MD-IC040
6
MD-ICH40
1
MD-CPK61
2
MD-RSM60
3
MM-CHC60
4
MD-IC800
5
MD-IC040
6
MD-ICH40
Anatomic 1mm transgingival abutment, crown height 6mm, SP
Abutment analog crown height 6mm, SP
Plastic healing cap crown h. 6mm, SP
Direct Impression coping, h. 8mm, SP
Burnout plastic cap, SP
Burnout anti-rotation plastic cap, SP
MK-CPK61 1mm Complete Prosthetic kit, h. 6mm, SP
STANDARD
CPK - Complete Prosthetic Kit
C=4mm H=1,2,3,4mm
C=6mm H=1,2,3,4mm
C=8mm H=1,2,3,4mm
} } }
Options:
1
MK-CPK41
6
MK-CPK42
6
MK-CPK43
6
MK-CPK44
6
MK-CPK61
6
MK-CPK62
6
MK-CPK63
6
MK-CPK64
6
MK-CPK81
6
MK-CPK82
6
MK-CPK83
6
MK-CPK84
1mm complete prosthetic kit, crown height 4mm, SP 2mm complete prosthetic kit, crown height 4mm, SP 3mm complete prosthetic kit, crown height 4mm, SP 4mm complete prosthetic kit, crown height 4mm, SP 1mm complete prosthetic kit, crown height 6mm, SP 2mm complete prosthetic kit, crown height 6mm, SP 3mm complete prosthetic kit, crown height 6mm, SP 4mm complete prosthetic kit, crown height 6mm, SP 1mm complete prosthetic kit, crown height 8mm, SP 2mm complete prosthetic kit, crown height 8mm, SP 3mm complete prosthetic kit, crown height 8mm, SP 4mm complete prosthetic kit, crown height 8mm, SP C=Crown Height H=Gingival Height
Anatomic transgingival abutment, SP C
H
All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MD-ICH40).
MD-CPK41* C=4mm, MD-CPK42* H=1,2,3,4mm MD-CPK43* MD-CPK44* MD-CPK61* C=6mm, MD-CPK62* H=1,2,3,4mm MD-CPK63* MD-CPK64* MD-CPK81* C=8mm, MD-CPK82* H=1,2,3,4mm MD-CPK83* MD-CPK84*
90.
1
8
MD-TCH13
MD-GPC10
STANDARD
Direct, Screw Retained Restoration Options 1.5:1
2
MD-TPH50
1.5:1
9
MD-TPA12
1 1.5:1
3
1.5:1
MD-CP013
10
1.5:1
4
11
MD-S0200
MD-CP050
3 1.5:1
12
MD-S0220
1.5:1
5
MD-CPH13
4 1.5:1
13
5
MD-CPH50
1.5:1
14
MD-S0224
1.5:1
7
6
MD-GP010
1.5:1
7
Direct gold plastic cylinder with hex. internal hex. SP
Material: Titanium Dimensions: Height - 11mm
Material: Burnout Plastic + gold -a Dimensions: Height - 15mm Diameter - 5.0mm
MD-TPH50
9
MD-TPA12
Direct temporary plastic cylinder internal hex. SP
Narrow profile temporary plastic abutment, SP
Material: Peek Dimensions: Height - 12mm Diameter - 5mm
Material: Peek Dimensions: Height - 11mm Diameter - 3.75mm
MD-CP013
10
MD-G0220
Direct plastic cylinder without hex. internal hex. SP
Direct gold prosthetic screw internal hex.
Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 3.75mm
Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm
MD-CP050
11
MD-S0200
Wide profile direct plastic cylinder without hex. SP
Mini prosthetic screw internal hex.
Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 5mm
Material: Titanium Dimensions: Length - 6.90mm 30 Ncm
MD-CPH13
1.5:1
The �functional height“ of all abutments is measured from the platform connection and does not include the internal hex. connection.
12
MD-S0220
Direct plastic cylinder with hex. internal hex. SP
Direct prosthetic screw internal hex.
Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 3.75mm
Material: Titanium Dimensions: Length - 7.60mm 30 Ncm
MD-CPH50
13
MD-S0222
Wide profile direct plastic cylinder with hex. SP
Medium prosthetic screw internal hex.
Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 5mm
Material: Titanium Dimensions: Length - 12mm 30 Ncm
MD-GP010
Direct gold plastic cylinder without hex. internal hex. SP
Please note: PEEK abutments are radiolucent!
MD-GPC10
MD-S0222
1.5:1
6
8
Direct temporary cylinder with hex. internal hex. SP
MD-G0220
2
1.5:1
MD-TCH13
Material: Burnout Plastic + gold -a Dimensions: Height - 15mm Diameter - 5mm
14
MD-S0224
Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 14mm 30 Ncm
1
6
MD-A0010
MD-MACF1
STANDARD
Cemented Restoration Options 1.5:1
2
1.5:1 MD-P0030
7
MD-MAC10
1 1.5:1
3
1.5:1
8
MD-CTP10
MD-WMAC1
2 1.5:1
4
1.5:1
MD-TPA10
3
1.5:1
4
MD-A0010
6
MD-MACF1
Esthetic abutment internal hex. 1mm, SP
Friction fit cementing post platform switching, SP
Material: Titanium Dimensions: Height - 9mm
Material: Titanium Dimensions: Height - 11mm Diameter - 4.80mm
MD-P0030
7
MD-MAC10
Esthetic abutment internal hex. 3mm, SP
Standard cementing post, SP
Material: Titanium Dimensions: Height - 11mm
Material: Titanium Dimensions: Height - 11mm Diameter - 4.75mm
MD-CTP10
8
MD-WMAC1
Narrow profile cementing post, SP
Wide profile cementing post, SP
Material: Titanium Dimensions: Height - 8.5mm Diameter - 3.75mm
Material: Titanium Dimensions: Height - 11mm Diameter - 5.50mm
MD-TPA10
Temporary plastic abutment, SP Material: Peek Dimensions: Height - 11mm Diameter - 4.75mm
MD-TPA10 Temporary plastic abutment, SP
92.
1
7
MD-A1510
MD-G0220
STANDARD
Direct, Cemented Restoration Options
1.5:1 1.5:1
2
8
MD-S0200
MD-A2510
1.5:1
9
MD-S0220
1
1.5:1
3
1.5:1
2
MD-AN251
11
8
Material: Titanium Dimensions: Length - 6.90mm 30 Ncm
MD-S0224
MD-AN151
9
15º angulated abutment internal hex. SP
1.5:1 MD-P1530
1.5:1
4
MD-AN251
25º angulated abutment internal hex. SP
Material: Titanium Dimensions: Length - 7.60mm 30 Ncm
10
Material: Titanium Dimensions: Length - 12mm 30 Ncm
MD-P2530
5
MD-P1530
Esthetic 15º angulated abutment internal hex. 3mm, SP Material: Titanium Dimensions: Height - 11mm 1.5:1
6
MD-P2530
Esthetic 25º angulated abutment internal hex. 3mm Material: Titanium Dimensions: Height - 11mm
MD-S0222
Medium prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 8.5mm
1.5:1
MD-S0220
Direct prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
The ” functional height “ of all abutments is measured from the platform connection and does not include the internal hex. connection.
MD-S0200
Mini prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
3
6
Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm
Esthetic 25º angulated abutment internal hex. 1mm, SP 1.5:1
5
MD-A2510
MD-G0220
Direct gold prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
MD-S0222
1.5:1
4
7
Esthetic 15º angulated abutment internal hex. 1mm, SP
MD-AN151
10
MD-A1510
11
MD-S0224
Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 14mm 30 Ncm
Ø5.60mm
Esthetic abutments 0º
Ø5.60mm
Ø3.40mm
Ø3.40mm
7mm
7mm
8mm
8mm
3mm 1mm
MD-A0010
MD-P0030
Esthetic angulated abutments 15º
Angulated abutments 15º Ø5.20mm
Ø5.20mm
Ø5.20mm Ø2.80mm 7mm
8mm
3.50
2.80
7mm
8mm
2.40
6.6mm
7.5mm
2.40
3mm
1.5mm
1mm
MD-A1510
MD-P1530
MD-AN151
Esthetic angulated abutments 25º
Angulated abutments 25º Ø5.60mm
Ø5.60mm
Ø5.60mm Ø3.30mm
3.50
7mm
8mm
2.40
7mm
8mm
3.30
3.30
3mm
1mm
MD-A2510
6.1mm
6.9mm
1.6mm
MD-P2530
MD-AN251
Standard abutments
MD-MAC10
Ø4.75mm
11mm
11mm
8.5mm
MD-CTP10
Ø5.50mm
Ø4.75mm
Ø3.75mm
MD-WMAC1
11mm
MD-MACF1
94.
1
MD-S0220
2
MD-TB001
3
MD-RSM10
STANDARD
CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4
Hexagon Connection
(with anti-rotational mechanism)
GI-SCH11
1
MD-S0220
2
MD-TB001
3
MD-RSM10
4
GI-SCH11
Direct prosthetic screw internal hex.
Ti Base Internal hex. connection for CAD/CAM, Standard platform
Implant analog Internal hex. Standard platform
Burnout anti-rotation plastic cap for Ti Base, Standard platform
Hex.
MK-TBS4 Ti base Kit h. 4mm for internal hex. connection, SP
For Laboratory Use Only!
Scan abutment
MD-SP001
Scanning abutment internal hex. connection, Standard platform
MD-S0220
Direct prosthetic screw internal hex.
MK-TBS4
1
2
MD-S0220
MD-TB002
3
MD-RSM10
STANDARD
CAD/CAM Ti Base Kit Multi Unit Restoration 5 4
Non-Hexagon Connection
(without anti-rotational mechanism)
GI-SCH11
1
MD-S0220
2
MD-TB002
3
MD-RSM10
4
GI-SCH11
Direct prosthetic screw internal hex.
Multi Unit Ti Base Internal hex. connection, Standard platform
Implant analog Internal hex. Standard platform
Burnout anti-rotation plastic cap for Ti Base, Standard platform
Non-Hex.
MK-MUS4 Multi Unit Ti Base Kit h. 4mm internal hex. connection, SP
For Laboratory Use Only!
Scan abutment
MD-SP001
Scanning abutment internal hex. connection, Standard platform
MD-S0220
Direct prosthetic screw internal hex.
MK-MUS4
96.96.
STANDARD
kit OT Equator Kits
Laboratory Use: Metal housing
OT Equator laboratory cap (black)
H=1,2,3,4,5mm
Clinical Use: Metal housing
}
Options:
MK-SOE1
OT Equator internal hex. kit, gingival height 1mm, SP
MK-SOE2
OT Equator internal hex. kit, gingival height 2mm, SP
MK-SOE3
OT Equator internal hex. kit, gingival height 3mm, SP
MK-SOE4
OT Equator internal hex. kit, gingival height 4mm, SP
MK-SOE5
OT Equator internal hex. kit, gingival height 5mm, SP
Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01
Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01
Standard retention (white) OT Equator cap (1.8kg) OE-RCW01
High retention (violet) OT Equator cap (2.7kg) OE-RCV01
2.6mm
1.7mm
OT Equator retention caps may be purchased separately.
Equator
Ball Attachment
OT Equator Tools
MT-LM005
Long motor adapter for 0.05" hex.
OT Equator Abutments
Ø2.5mm
MT-SM005
Short motor adapter for 0.05" hex.
Ø2.5mm
1.7mm 1.7mm
2mm
1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection Ø2.5mm Ø2.5mm 1.7mm 1.7mm 4mm
OE-RSM60
3mm
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.7mm
5mm
ET-IT001
OT Equator handling tools
98.
1
MD-S0220
2
MD-IN060
3
MM-SIZW6
STANDARD
Non-Cemented Zircon Prosthetic Abutments 5
1
MD-S0220
2
Zircon incisor 15ยบ abutment set int. hex., SP
1
MD-S0220
2
MD-IN060
3
MM-SIZW6
MK-SIZ6
Direct prosthetic screw internal hex.
Incisor esthetic Ti abutment internal hex., SP
Incisor white zircon crown, SP/NP
MD-CIZ60
STANDARD
Pre-Cemented Zirconia Prosthetic Abutments 5
Zircon cemented incisor 15ยบ abutment set int. hex., SP
1
MD-S0220
2
MD-CIZ60
Direct prosthetic screw internal hex.
Incisor TiZi abutment int. hex., SP
MK-SIC6
STANDARD
Zircon Abutment Kits
Kit Options:
}
MK-SIC6
Zircon cemented incisor 15ยบ abutment set int. hex., SP
MK-SIZ6
Zircon incisor 15ยบ abutment set int. hex., SP
Zircon cemented incisor 15ยบ abutment set int. hex., SP
Zircon incisor 15ยบ abutment set int. hex., SP
8.5mm
2mm
Zirconia abutments cannot be purchased separately. They are provided a direct prosthetic screw internal hex. (MN-S0160).
1mm
100.
1
MD-S0220
2
MD-PM040
3
MM-SPZW4
STANDARD STANDARD
Non-Cemented Zircon Prosthetic Abutments 5
1
MD-S0220
2
Custom premolar abutment set int. hex. connection, SP
1
MD-S0220
2
MD-PM040
3
MM-SPZW4
MK-SPZ4
Direct prosthetic screw internal hex.
Premolar esthetic Ti abutment internal hex. connection, SP
Premolar white zirconia crown, SP
MD-CPZ40
STANDARD
Pre-Cemented Zircon Prosthetic Abutments Zirconia cemented premolar abutment set int. hex., SP
1
MD-S0220
2
MD-CPZ40
MK-SPC4
Direct prosthetic screw internal hex.
Premolar TiZi abutment int. hex., SP
STANDARD
Zircon Abutment Kits
Kit Options:
}
MK-SPZ4
Custom premolar abutment set internal hex. connection, SP
MK-SPC4
Zircon cemented premolar. abutment set internal hex., SP
Zircon cemented premolar abutment set internal hex., SP
8.4mm Custom premolar abutment set internal hex. connection, SP
2.7mm
Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220).
1.8mm
102.
1
3
MM-IT450
MA-RSM10
STANDARD
Multi-Unit System 1.5:1
2
MM-IO450
1.5:1
4
MT-MUK02
1
1.5:1
MM-IT450
3
Multi-Unit impression coping for closed tray
1:1
Multi-Unit abutment analog
Material: Stainless steel Dimensions: Length - 8mm
2
MA-RSM10
Material: Stainless steel Dimensions: Length - 12mm
MM-IO450
4
MT-MUK02
Multi-Unit impression coping for open tray
Multi-Unit key
Material: Stainless steel Dimensions: Length - 10mm
Material: Stainless steel Dimensions: Length - 22mm
MT-MUK02 Multi-Unit key
1
8
MA-S1375
MM-CP045
STANDARD 1.5:1
2
MA-S2375
Multi-Unit System
1.5:1
9
MM-T0450
10
MM-MG450
1.5:1
3
1.5:1
MA-S3375
1
1.5:1
4
1:1
MA-S4375
11
2
MM-BGC45
5
12
MM-S0330
1.5:1 MM-G0330
MM-CP045
Multi-Unit plastic cylinder
Material: Titanium Dimensions: Height -1mm 30-35 Ncm
Material: Burnout plastic Dimensions: Length - 10mm
MA-S2375
9
MA-S3375
MM-T0450
Multi-Unit Titanium temporary cylinder
Material: Titanium Dimensions: Height -2mm 30-35 Ncm
3
MA-ANH17
13
8
Multi-Unit abutment 1mm, SP
Multi-Unit abutment 2mm, SP 1.5:1
1.5:1
MA-S1375
Material: Titanium Dimensions: Length - 10mm
10
MM-MG450
Multi-Unit abutment 3mm, SP
Multi-Unit direct gold
Material: Titanium Dimensions: Height -3mm 30-35 Ncm
Material: Burnout plastic+ gold -a Dimensions: Length - 14.5mm
1.5:1
6
1.5:1
MA-ANH30
4
MA-S4375
11
Multi-Unit abutment 4mm, SP
MM-BGC45
Multi-Unit bar gold coping
Material: Titanium Dimensions: Height -4mm 30-35 Ncm
Material: Gold-e Dimensions: Length - 3.3 mm
1.5:1
7
5
MH-00450
MA-ANH17
12
Material: Titanium Dimensions: Length - 3.8mm 25 Ncm
Material: Titanium 1.5:1
6
MA-ANH30
Multi-Unit 30deg. angulated abutment with hex. Material: Titanium
7
MH-00450
Multi-Unit healing cap Material: Titanium Dimensions: Length - 3.3mm
MA-ANH30 Multi-Unit 30deg. angulated abutment with hex.
MM-S0330
Multi-Unit direct prosthetic screw
Multi-Unit 17deg. angulated abutment with hex.
13
MM-G0330
Multi-Unit direct prosthetic gold screw Material: Gold Dimensions: Length - 3.8mm 20 Ncm
104.
17°
30° 15°
1.2mm
15°
Multi-Unit Angulated 2.6mm
1.2mm
3.2mm
1.3mm
1mm
MA-ANH17
MA-ANH30
Solutions for extreme situations
64°
^
^
30°
^
^ Straight Multi-Unit abutments can be used with implants with divergence of up to 30º.
17º Multi-Unit abutments can be used with implants with divergence of up to 64º.
Clinical summary
Place Multi Unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. To screw the abutment to the implant, position the Multi-Unit key (MTMUK02) through the gripping bar’s opening. Recommended tightening moment is 30 Ncm.
^
^
90°
30º multi unit abutments can be used with implants with divergence of up to 90º.
1
6
MB-N1375
MB-AN152
STANDARD
Ball Attachments
1.5:1
2
1.5:1
MB-N2375
7
MB-AN252
1.5:1
3
MB-N3375
1.5:1
8
1
MB-N1375
6
MB-RS375
MB-AN152
Ball anchor 15 deg. angulated abutment
Ball attachment anchor internal hex. 1mm, SP
Material: Titanium
Material: Titanium Dimensions: Height - 1mm 1.5:1
4
MB-N4375
1:1
9
2
MB-N2375
7
Ball attachment anchor internal hex. 2mm, SP
MT-NB225
Ball anchor 25 deg. angulated abutment
Material: Titanium Dimensions: Height - 2mm 1.5:1
5
3
MB-N3375
Material: Titanium
8
Ball attachment anchor internal hex. 3mm, SP
MB-N5375
1:1
MB-N4375
Ball attachment anchor internal hex. 4mm, SP Material: Titanium Dimensions: Height - 4mm
5
MB-RS375
Ball attachment analog internal hex.
Material: Titanium Dimensions: Height - 3mm
4
1.5:1
MB-AN252
Material: Stainless steel Dimensions: Length - 15.1mm
9
MT-NB225
Ball attachment anchor key Material: Stainless steel Dimensions: Length - 22mm
MB-N5375
Ball attachment anchor internal hex. 5mm, SP Material: Titanium Dimensions: Height - 5mm
Ă˜2.25mm
2.6mm
Gingival height 1,2,3,4,5mm MB-N3375
Ball attachment anchor internal hex. 3mm
Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
106.
1 1
7
MB-SF200
MT-TSD10
STANDARD
MB-PPR10
1.5:1
2 2
MB-GPS10
2:1
Angulated Ball Attachments
MB-DB235
1.5:1
3
1:2
MB-TTP10
1:1
3
MB-PPC10
4
MB-PR010
4
MB-TTP10
8
MB-DMH10
1.5:1
1
MB-TBS10
5
MB-PR010
2:1
6
9
MB-TBS20
2
10
Screw driver for titanium ball cap Material: Stainless steel Dimensions: Length - 60mm
MB-GPS10
8
MB-DMH10
Double metal housing
Gold ball cap
MB-PPR10
3:1
1.5:1
MT-TSD10
MB-PPC10
2:1 1.5:1
7
Material: Plastic Dimensions: Length - 3.5mm
1:1
1.5:1
5
MB-SF200
Plastic ball cap
2:1
Material: Gold-e Dimensions: Length - 2.4mm 2:1
11
3
MB-DB235
MB-TTP10
9
Standard plastic cap for metal housing
Material: Titanium Dimensions: Length - 3.1mm
Material: Plastic Dimensions: Length - 2.6mm Retention 1200-1300g
1:1
4
5
MB-PR010
10
MB-PPR10
Plastic mounting sleeve
Soft plastic cap for metal housing
Material: Plastic Dimensions: Length - 2mm Diameter - 3.8mm
Material: Plastic Dimensions: Length - 2.6mm Retention 800-950g
MB-TBS10
Titanium ball cap spring standard Material: Steel Dimensions: Diameter - 2.50mm
6
MB-PPC10
Titanium ball cap
11
MB-DB235
Plastic disc for ball attachment Material: Plastic Dimensions: Diameter - 15mm
MB-TBS20
Titanium ball cap spring soft Material: Steel Dimensions: Diameter - 2.60mm
MB-DB235 Plastic disc for ball attachment
Angulated Ball Attachments
15°
Ø4
Ø4.6
Ball Ø2.25
25° 3mm
3.5mm
1.7mm
1.7mm
MB-AN152
MB-AN252
50°
^
^
^
^
Place the ball anchor angulated abutment (15°/25°) on the implant by the gripping bar. To screw the abutment to the implant, position the hand hex. driver (MT-HHR13) through the gripping bar opening. Recommended tightening moment is 30 Ncm.
^
Clinical summary
25° 25°
^
^
^
15º ball attachments can be used with implants with divergence of up to 30º.
^
^
15° 15°
^
30°
^
Solutions for extreme situations
.6
Ball Ø2.25
25º ball attachments can be used with implants with divergence of up to 50º.
108.
1
8
MB-SZL00
MM-LCT10
STANDARD 1:1
2
Locator Attachment System
MB-SZL01
1:1
3
MB-SZL02
1:1.5
9
MM-LMP02
1
1:1
4
MB-SZL03
10
2
MB-SZL01
Material: Steel Titanium Nitride coated Ti
9
Locator abutment 1mm hgt., Standard platform
MM-LFA40
6
MB-SZL05
1:1.5
3
MB-SZL02
Material: Steel/ Nylon Dimensions: Length - 1.80mm Titanium Nitride coated Ti
10
Locator abutment 2mm hgt., Standard platform
Material: Aluminum polyethylene Dimensions: Length - 4.50mm Diameter - 4.70mm
Material: Titanium Nitride coated Ti Dimensions: Height - 2mm
MB-SZL06
4
MB-SZL03
Locator abutment 3mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 3mm
1:1
5
MM-LIC10
Locator impression coping (4 Pack)
1:1
7
MM-LMP02
Locator male processing package (2 Pack)
Material: Titanium Nitride coated Ti Dimensions: Height - 1mm 1:1
MM-LCT10
Locator core tool
Material: Titanium Nitride coated Ti Dimensions: Height - 0mm 1:1.5
11
MB-SZL04
8
MM-LIC10
1:1
5
MB-SZL00
Locator abutment 0mm hgt., standard platform
1:1.5
11
MM-LFA40
Locator female analog 4mm dia. (4 Pack) Material: Aluminum polyethylene Dimensions: Length - 10.40mm Diameter - 4mm
MB-SZL04
Locator abutment 4mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 4mm
6
MB-SZL05
Locator abutment 5mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 5mm
7 1.78mm
Gingival height 0-6mm
MB-SZL06
Locator abutment 6mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 6mm
*Note: Locator selection should be based on gingival height
MB-SZL03 3mm Locator Standard abutment
Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
1
6
MM-LRM10
MM-LPP10
STANDARD 1:1
2
MM-LLR10
2
MM-LRM10
1:1
7
MM-LBP10
8
MM-LSD15
1:1
1:1
3
MM-LEL10
3
MM-LLR10
1:1
Locator Attachment System
1
1:1
4
MM-LER10
4
MM-LEL10
1:1
5
MM-LELE1
5
MM-LER10
9
MM-LSD21
2
1:1
MM-LLR10
Material: Polyethylene black Dimensions: Length - 15mm Diameter - 4.60mm
7
Material: Nylon pink Dimensions: Length - 1.80mm Diameter - 4.70mm
3
MM-LELE1
MM-LEL10
Material: Polyethylene black Dimensions: Length - 1.80mm Diameter - 4.60mm
8
1.5:1
4
Locator torque wrench driver short
Material: Nylon blue Dimensions: Length - 1.80mm Diameter - 4.70mm
Material: Stainless steel Dimensions: Length - 15mm
MM-LER10
9
MM-LSD21
Locator extended range (4 Pack)
Locator torque wrench driver long
Material: Nylon green Dimensions: Length - 1.80mm Diameter - 4.70mm
Material: Stainless steel Dimensions: Length - 21mm
10°-20°*, 3-4 lbs**, 1.36-1.82 kg
5
MM-LSD15
Locator extra light retention
(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg 1:1
MM-LBP10
Locator black processing replacement male (4 Pack)
(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg
1:1
MM-LPP10
Locator parallel post (4 Pack)
Locator light retention
1:1
6
6
Material: Material: Nylon Aluminum Dimensions: Dimensions: Length Length -- 1.80mm 10.40mm Diameter Diameter -- 4.70mm 4mm
1.5:1 1:1
MM-LRM10 MM-LFA40
Locatorreplacement female analog 4mm Locator male clear (4 Pack) 0°-10°*, 5 lbs**, 2.27 kg dia. (4 Pack)
MM-LELE1 Locator extra-light extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
Material: Nylon red Dimensions: Length - 1.80mm Diameter - 4.70mm
* For the correction of the axes divergences for one implant ** Retention strength
110.
MW-IT300 Direct impression coping for closed tray internal hex., WP
1
5
MW-I0470
MW-IT300
WIDE
Analog and Impression Copings 1.5:1
6
MW-PF550
1.5:1
2
MD-G0213
1
MW-I0470
5
Impression coping for open tray internal hex. WP 2:1
7
Direct impression coping for closed tray internal hex. WP
Material: Stainless steel Dimensions: Height - 11mm
MW-RSM10
2
MD-G0213
MW-IT300
Material: Titanium Dimensions: Height - 8mm
6
Direct impression coping guide pin internal hex.
MW-PF550
Direct press fit for closed tray WP
1.5:1
3
Material: Titanium Dimensions: Length - 21.3mm
1.5:1 MW-IT100
3
MW-IT100
Impression coping for closed tray internal hex. WP Material: Stainless steel Dimensions: Height - 9mm 1.5:1
4
4
MD-GP100
Direct impression coping guide pin internal hex.
MD-GP100
Material: Titanium Dimensions: Length - 16.5mm
1.5:1
MW-I0470 Impression coping for open tray internal hex., WP
Material: Titanium Dimensions: Height - 11mm
7
MW-RSM10
Wide. implant analog internal hex. WP Material: Stainless steel Dimensions: Length - 12mm
112.
1
MW-CPK61
2
MW-RSM60
3
MW-CHC60
WIDE
CPK - Complete Prosthetic Kit MK-WPK61 5 4
MW-IC800
5
MW-IC040
6
MW-ICH40
1
MW-CPK61
2
MW-RSM60
3
MW-CHC60
4
MW-IC800
5
MW-IC040
6
MW-ICH40
Anatomic 1mm transgingival abutment, crown height 6mm, WP
Wide abutment analog crown height 6mm, WP
Wide plastic healing cap h. 6mm, WP
Direct impression coping h. 8mm, WP
Burnout plastic cap, WP
Burnout anti-rotation plastic cap, WP
MK-WPK61 1mm complete prosthetic kit, crown height 6mm, WP
WIDE
CPK - Complete Prosthetic Kit
C=4mm, H=1,2,3,4mm
C=6mm, H=1,2,3,4mm
C=8mm, H=1,2,3,4mm
} } }
Kit Options:
1
MK-WPK41
6
MK-WPK42
6
MK-WPK43
6
MK-WPK44
6
MK-WPK61
6
MK-WPK62
6
MK-WPK63
6
MK-WPK64
6
MK-WPK81
6
MK-WPK82
6
MK-WPK83
6
MK-WPK84
1mm complete prosthetic kit, crown height 4mm, WP 2mm complete prosthetic kit, crown height 4mm, WP 3mm complete prosthetic kit, crown height 4mm, WP 4mm complete prosthetic kit, crown height 4mm, WP 1mm complete prosthetic kit, crown height 6mm, WP 2mm complete prosthetic kit, crown height 6mm, WP 3mm complete prosthetic kit, crown height 6mm, WP 4mm complete prosthetic kit, crown height 6mm, WP 1mm complete prosthetic kit, crown height 8mm, WP 2mm complete prosthetic kit, crown height 8mm, WP 3mm complete prosthetic kit, crown height 8mm, WP 4mm complete prosthetic kit, crown height 8mm, WP C=Crown Height H=Gingival Height
Anatomic transgingival abutment, WP C
H
All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MW-ICH40).
MW-CPK41* C=4mm, MW-CPK42* H=1,2,3,4mm MW-CPK43* MW-CPK44* MW-CPK61* C=6mm, MW-CPK62* H=1,2,3,4mm MW-CPK63* MW-CPK64* MW-CPK81* C=8mm, MW-CPK82* H=1,2,3,4mm MW-CPK83* MW-CPK84*
114.
1
8
MW-CPH13
MW-TPA12
WIDE
Direct, Screw Retained Restoration Options 1.5:1
2
MW-CP013
1.5:1
9
MD-G0220
10
MD-S0200
1.5:1 1.5:1
3
1
MW-CPH60
1.5:1
11
2
MD-S0220
12
MD-S0222
3
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 4.50mm
Material: Peek Dimensions: Height - 11mm Diameter - 4.50mm
MW-CP013
9
MW-CPH60
Material: Gold-s Dimensions: Length - 7.7mm 20 Ncm
10
5
1.5:1
13
4
MW-CP060
Direct plastic cylinder without hex. dia. 6mm, WP
MD-S0224
Material: Titanium Dimensions: Length - 6.9mm 30 Ncm
11
6
5 1.5:1
MW-GPC10
6
MW-TPH50
7
MW-GP010
Material: Titanium Dimensions: Length - 11.7mm 30 Ncm
MW-GPC10
MW-GP010
Material: Burnout plastic + Gold-a Dimensions: Height - 15mm Diameter - 5.50mm
The �functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection. Please note: PEEK abutments are radiolucent!
MD-S0222
Material: Peek Dimensions: Height - 12mm Diameter - 5.50mm
Direct gold abutment without hex. WP
1.5:1
12
Medium prosthetic screw internal hex.
Material: Burnout plastic + Gold-a Dimensions: Height - 15mm Diameter - 5.50mm
7
Material: Titanium Dimensions: Length - 7.6mm 30 Ncm
Wide direct temporary plastic cylinder internal hex.
Wide gold plastic cylinder with hex. internal hex.
1.5:1
MD-S0220
Direct prosthetic screw internal hex.
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 6.50mm 1.5:1
MD-S0200
Mini prosthetic screw internal hex.
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 6.50mm
1.5:1
MD-G0220
Direct gold prosthetic screw internal hex.
Direct plastic cylinder with hex. dia.6mm WP
MW-TPH50
MW-TPA12
Narrow profile temporary plastic abutment, WP
Material: Burnout plastic Dimensions: Height - 11mm Diameter - 4.50mm
1.5:1
MW-CP060
8
Wide dia. plastic cylinder with hex. internal hex.
Wide dia. plastic cylinder without hex. internal hex.
1.5:1
4
MW-CPH13
13
MD-S0224
Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 13.8mm 30 Ncm
1
3
MW-MAC10
MW-WMAC1
WIDE
Cemented Restoration Options 1.5:1
2
1.5:1
4
MW-CTP10
1.5:1
MW-TPA10
1.5:1
1
MW-MAC10
3
Wide platform cementing post
Wide profile cementing post for WP
Material: Titanium Dimensions: Height - 11mm Diameter - 5.5mm
2
MW-CTP10
Direct conical titanium post for WP Material: Titanium Dimensions: Height - 8.5mm Diameter - 5.5mm
MW-MAC10 Wide platform cementing post
MW-WMAC1
Material: Titanium Dimensions: Height - 11mm Diameter - 6.5mm
4
MW-TPA10
Temporary plastic abutment, WP Material: Peek Dimensions: Height - 11mm Diameter - 5.5mm
116.
1
5
MW-AN151
MD-S0200
WIDE
Direct, Cemented Restoration Options
1.5:1 1.5:1
2
6
MD-S0220
7
MD-S0222
MW-P0010
1.5:1
1
1.5:1
3
MW-P1510
MW-AN151
5
Mini prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
Material: Titanium Dimensions: Length - 6.90mm 30 Ncm
1.5:1
8
MD-S0224
2
1.5:1
4
MW-P0010
6
Wide esthetic abutment internal hex. 1mm
MD-G0220
1.5:1
3
MW-P1510
Material: Titanium Dimensions: Length - 7.60mm 30 Ncm
7
Wide esthetic 15ยบ angulated abutment internal hex. 1mm
MD-G0220
Direct gold prosthetic screw internal hex. Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm
MW-P1510 Wide esthetic 15 angulated abutment internal hex. 1mm
MD-S0222
Medium prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
4
MD-S0220
Direct prosthetic screw internal hex.
Material: Titanium Dimensions: Height - 9mm
1.5:1
MD-S0200
Wide 15ยบ angulated abutment internal hex.
Material: Titanium Dimensions: Length - 11.7mm 30 Ncm
8
MD-S0224
Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 13.8mm 30 Ncm
Esthetic abutments 0º Ø4.30mm
8mm
1mm Ø6.30mm
MW-P0010
Esthetic angulated abutments 15º
Angulated abutments 15º
Ø4mm
9mm
9mm
4.50
4.50 1mm
2.90
2.90
Ø4.50mm
Ø4.50mm
MW-AN151
MW-P1510
Standard abutments
11mm
11mm 8.5mm
Ø4.50mm
MW-CTP10
Ø4.50mm Ø5.50mm
Ø4.50mm Ø6.50mm
MW-MAC10
MW-WMAC1
118.
1
MD-S0220
2
MW-TB001
3
MW-RSM10
WIDE
CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4
Hexagon Connection MK-TBW4
(with anti-rotational mechanism)
GI-WCH11
1
MD-S0220
2
MW-TB001
3
MW-RSM10
4
GI-WCH11
Direct prosthetic screw internal hex.
Ti Base internal hex. connection for CAD/CAM, Wide platform
Implant analog internal hex. Wide platform
Burnout anti-rotation plastic cap for Ti Base, Wide platform
Hex.
MK-TBW4 Ti Base Kit h. 4mm for internal hex. connection, WP
For Laboratory Use Only!
Scan abutment
MW-SP001
Scanning abutment internal hex. connection, Wide platform
MD-S0220
Direct prosthetic screw internal hex.
1
2
MD-S0220
MW-TB002
3
MW-RSM10
WIDE
CAD/CAM Ti Base Kit Multi-Unit Restoration 5 4
Non Hexagon Connection MK-MUW4
(without anti-rotational mechanism)
GI-WCH11
1
MD-S0220
2
MW-TB002
3
MW-RSM10
4
GI-WCH11
Direct prosthetic screw internal hex.
Multi-Unit Ti Base internal hex. connection, Wide platform
Implant analog internal hex. Wide platform
Burnout anti-rotation plastic cap for Ti Base, Wide platform
Non-Hex.
MK-MUW4 Multi-Unit Ti Base kit h. 4mm internal hex. connection, WP
For Laboratory Use Only!
Scan abutment
MW-SP001
Scanning abutment internal hex. connection, Wide platform
MD-S0220
Direct prosthetic screw internal hex.
120.120.
WIDE
kit OT Equator Kits
Laboratory Use: Metal housing
H=1,3,5mm OT Equator laboratory cap (black)
}
Options:
MK-WOE1
OT Equator internal hex. kit, gingival height 1mm, WP
MK-WOE3
OT Equator internal hex. kit, gingival height 3mm, WP
MK-WOE5
OT Equator internal hex. kit, gingival height 5mm, WP
Clinical Use: Metal housing
Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01
Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01
Standard retention (white) OT Equator cap (1.8kg) OE-RCW01
High retention (violet) OT Equator cap (2.7kg) OE-RCV01
2.6mm
1.9mm
OT Equator retention caps may be purchased separately.
Equator
Ball Attachment
OT Equator Tools
MT-LM005
Long motor adapter for 0.05" hex.
MT-SM005
OT Equator Abutments
Ø2.5mm
Short motor adapter for 0.05" hex.
1.9mm 1mm
MT-SRA10
Square connection to ratchet adapter
MT-SHA10
Hand wrench square connection Ø2.5mm
1.9mm
3mm
OE-RSM60
OT Equator analog
OE-IC001
OT Equator tear off impression transfer cap
Ø2.5mm
OE-IC002
OT Equator impression coping cap
1.9mm
5mm
ET-IT001
OT Equator handling tools
122.
1
MD-S0220
2
MW-PM040
3
MM-WPZW4
WIDE
Pre-Cemented Zircon Prosthetic Abutments 5
1
MD-S0220
2
Custom premolar abutment set internal hex. connection, WP
1
MD-S0220
2
MW-PM040
3
MM-WPZW4
MK-WPZ4
Direct prosthetic screw internal hex.
Premolar esthetic Ti abutment internal hex. connection, WP
Premolar white zirconia crown, WP
MW-CPZ40
WIDE
Pre-Cemented Zircon Prosthetic Abutments Zirconia cemented premolar abutment set int. hex., WP
1
MD-S0220
2
MW-CPZ40
MK-WPC4
Direct prosthetic screw internal hex.
Premolar TiZi abutment int. hex., WP
WIDE
Zirconia Abutment Kits
Kit Options:
}
MK-WPZ4
Custom premolar abutment set internal hex. connection, WP
MK-WPC4
Zircon cemented premolar. abutment set internal hex., WP
Zirconia cemented incisor abutment set internal hex., WP
8.4mm
Custom premolar abutment set int. hex. connection, WP
2.7mm
Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220).
1.8mm
124.
1
5
MM-IT450
MA-W2500
WIDE
Multi-Unit System
1.5:1 1.5:1
2
6
MA-W3500
7
MA-W4500
MM-IO450
1.5:1
1
1.5:1
3
MA-RSM10
1.5:1
8
2
MM-T0450
1.5:1
4
MM-IT450
5
Wide platform Multi-Unit abutment 2mm
Material: Stainless steel Dimensions: Length - 8mm
Material: Titanium Dimensions: Height-2mm 30-35 Ncm
MM-IO450
6
3
1.5:1
4
MM-T0450 Multi-Unit temporary cylinder
MA-W3500
Multi-Unit impression coping for open tray
Wide platform Multi-Unit abutment 3mm
Material: Stainless steel Dimensions: Length - 10mm
Material: Titanium Dimensions: Height - 3mm 30-35 Ncm
MA-W1500
1.5:1
MA-W2500
Multi-Unit impression coping for closed tray
MA-RSM10
7
MA-W4500
Multi-Unit abutment analog
Wide platform Multi-Unit abutment 4mm
Material: Stainless steel Dimensions: Length - 12mm
Material: Titanium Dimensions: Height - 4mm 30-35 Ncm
MA-W1500
8
MM-T0450
Wide platform Multi-Unit abutment 1mm
Multi-Unit temporary cylinder
Material: Titanium Dimensions: Height- 1mm 30-35 Ncm
Material: Titanium Dimensions: Length - 10mm
1
5
MM-CP045
MM-S0330
WIDE 1.5:1
1.5:1
2
6
MM-G0330
7
MT-MUK02
MM-MG450
Multi-Unit System 1.5:1
1:1
3
1
MH-00450
1.5:1
4
1:1
MM-CP045
5
MM-S0330
Multi-Unit plastic cylinder
Multi-Unit direct prosthetic screw
Material: Burnout plastic Dimensions: Length - 10mm
Material: Titanium Dimensions: Length - 3.8mm 25 Ncm
MM-BGC45
2
MM-MG450
6
Multi-Unit direct gold
Multi-Unit direct prosthetic gold screw
1.5:1 Material: Burnout plastic+gold - a Dimensions: Length - 14.5mm
3
MH-00450
Multi-Unit healing cap Material: Titanium Dimensions: Height - 3.3mm 15 Ncm
4
MM-BGC45
Multi-Unit bar gold coping Material: Gold Dimensions: Length - 3.3mm
MM-MG450 Multi-Unit direct gold
MM-G0330
Material: Gold Dimensions: Length - 3.8mm 20 Ncm
7
MT-MUK02
Multi-Unit key Material: Stainless steel Dimensions: Length - 22mm
126.
1
4
MW-B1500
MT-NB225
WIDE
Ball Attachment System
1.5:1
2
MW-B3500
1:1
5
MB-RS375
1.5:1
3
1
MW-B5500
MW-B1500
4
Wide ball attachment anchor internal hex. 1mm
1:1
Ball attachment anchor key
Material: Titanium Dimensions: Height - 1mm
2
1.5:1
MW-B3500
Wide ball attachment anchor internal hex. 3mm Material: Titanium Dimensions: Height - 3mm
3
MT-NB225
Material: Stainless steel Dimensions: Length - 22mm
5
MB-RS375
Ball attachment analog internal hex. Material: Stainless steel Dimensions: Length - 15.1mm
MW-B5500
Wide ball attachment anchor internal hex. 5mm Material: Titanium Dimensions: Height - 5mm
Ă˜2.25mm
2.6mm
Gingival height 1,3,5mm
MW-B3500
Wide ball attachment anchor internal hex. 3mm
Although the visual features a SEVEN implant, the abutment fits all Wide MIS internal hex. implants.
1
7
MB-SF200
MT-TSD10
WIDE 1.5:1
2
MB-GPS10
3
MB-TTP10
4
MB-PR010
Ball Attachment System
1.5:1
1:2
8
MB-DMH10
1
1.5:1
7
Plastic ball cap
9
MB-TBS10
MB-PPC10
2
MB-GPS10
Material: Stainless steel Dimensions: Length - 60mm
8
MB-DMH10
Double metal housing
Gold ball cap
2:1
MT-TSD10
Screw driver for titanium ball cap
Material: Plastic Dimensions: Length - 3.5mm
1:1
1.5:1
5
MB-SF200
1.5:1
6
10
MB-TBS20
Material: Gold-e Dimensions: Length - 2.4mm
MB-PPR10
2:1 1.5:1
11
3
MB-TTP10
9
Titanium ball cap
MB-DB235
Standard plastic cap for metal housing
Material: Titanium Dimensions: Length - 3.1mm 1:1
4
MB-PR010
Material: Plastic Dimensions: Length - 2.6mm Retention 1200-1300g
10
Plastic mounting sleeve
MB-TBS10
Material: Steel Dimensions: Diameter - 2.5mm
6
Material: Plastic Dimensions: Length - 2.6mm Retention 800-950g
11
Titanium ball cap spring standard
MB-TBS20
Titanium ball cap spring soft Material: Steel Dimensions: Diameter - 2.6mm
MB-SF200
Plastic ball cap
MB-PPR10
Soft plastic cap for metal housing
Material: Plastic Dimensions: Length - 2mm
5
MB-PPC10
MB-DB235
Plastic disc for ball attachment Material: Plastic Dimensions: Diameter - 15mm
128.
1
8
MB-WZL00
MM-LIC10
WIDE WIDE 1:1
2
Locator Attachment System
1.5:1
MB-WZL01
9
MM-LFA50
1:1
3
MB-WZL02
1.5:1
10
1
MM-LMP02
4
MB-WZL03
1:1
8
2
Material: Aluminum Polyethylene Dimensions: Length - 4.50mm
MB-WZL01
9
Locator abutment 1mm height, wide platform
MB-WZL04
Material: Aluminum Dimensions: Height- 10.4mm Diameter - 5mm
1:1
3
MB-WZL05
Locator abutment 2mm height, wide platform Material: Titanium Nitride coated Ti Dimensions: Height - 2mm
1:1
7
MB-WZL02
MB-WZL06
4
MM-LFA50
Locator female analog 5mm dia. (4 Pack)
Material: Titanium Nitride coated Ti Dimensions: Height - 1mm
6
MM-LIC10
Locator impression coping (4 Pack)
Material: Titanium Nitride coated Ti Dimensions: Height- 0mm
1.5:1
5
MB-WZL00
Locator abutment 0mm height, Wide platform
1:1
10
MM-LMP02
Locator male processing package (2 Pack) Material: Steel/ Nylon Dimensions: Length - 1.80mm
MB-WZL03
Locator abutment 3mm height, wide platform Material: Titanium Nitride coated Ti Dimensions: Height - 3mm
1:1
5
MB-WZL04
Locator abutment 4mm height, Wide platform Material: Titanium Nitride coated Ti Dimensions: Height - 4mm
6
MB-WZL05
Locator abutment 5mm height, wide platform Material: Titanium Nitride coated Ti Dimensions: Height - 5mm
7
MB-WZL06
Locator abutment 6mm height, Wide platform 1.78mm
Material: Titanium Nitride coated Ti Dimensions: Height - 6mm
Gingival height 0-6mm Note: Locator selection should be based on gingival height
MB-WZL02 2.0mm Locator Wide abutment
Although the visual features a SEVEN implant, the abutment fits all MIS wide internal hex. implants.
1
6
MM-LRM10
MM-LPP10
WIDE 1:1
2
1:1
7
MM-LLR10
1:1
3
1:1
8
MM-LEL10
Locator Attachment System
MM-LBP10
MM-LSD15
1 1
1:1
4
Locator replacement male clear
6
Material: Nylon Dimensions: Length - 1.80mm Diameter - 4.70mm
1:1
9
MM-LSD21
2
MM-LELE1
MM-LLR10
Material: Polyethylene black Dimensions: Length - 15mm Diameter - 4.60mm
7
Locator light retention
1:1
3
Locator black processing replacement male (4 Pack)
Material: Nylon pink Dimensions: Length - 1.8mm Diameter - 4.70mm
Material: Polyethylene black Dimensions: Length - 1.80mm Diameter - 4.60mm
MM-LEL10
8
Material: Nylon blue Dimensions: Length - 1.8mm Diameter - 4.70mm
MM-LER10
Material: Stainless steel Dimensions: Length - 15mm
9
MM-LSD21
Locator extended range (4 Pack)
Locator torque wrench driver long
Material: Nylon green Dimensions: Length - 1.8mm Diameter - 4.70mm
Material: Stainless steel Dimensions: Length - 21mm
10°-20°*, 3-4 lbs**, 1.36-1.82 kg**
5
MM-LSD15
Locator torque wrench driver short
(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg**
4
MM-LBP10
(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg**
Locator extra light retention 1.5:1
MM-LPP10
Locator parallel post (4 Pack)
(4 Pack) 0°-10°*, 5 lbs**, 2.27 kg**
MM-LER10
1.5:1
5
MM-LRM10
MM-LELE1 5 MM-LELE1
Locator extra light Locator extraextended light extended (4 Pack)10°-20°*, 1.5 1.5 lbs**, (4 Pack)10°-20°*, lbs**,0.68 0.68kg kg** Material:Material: Nylon Red Nylon red Dimensions: Length Length - 1.8mm Dimensions: - 1.8mm Diameter - 4.70mm Diameter - 4.70mm
* For the correction of the axes divergences for a single implant ** Retention strength
MM-LSD21 Locator torque wrench long driver
130.
1
5
MM-TRU10
MM-TC100
2:1
6
Bar Attachments
MM-PC100
1:2
2
MM-GRU10
1:3
1:2
3
7
1
MM-GB100
MM-TRU10
5
Titanium rider-ovoid
MM-PBU10
Gold rider-round
Material: Titanium Dimensions: Length - 50mm Height - 2.9mm 1:2
2
MM-GRU10
Material: Gold-e Dimensions: Length - 3.5mm Height - 2.5mm
6
Gold rider-ovoid 1:3
4
3
MM-PBU10
Plastic bar-ovoid Material: Plastic Dimensions: Length - 80mm Height - 2.3mm
1:2
4
MM-GBU10
Gold bar-ovoid Material: Gold-e Dimensions: Length - 50mm Height - 2.3mm
MM-PC100
Plastic bar-round
Material: Gold-e Dimensions: Length - 50mm Height - 2.8mm
MM-GBU10
MM-TC100
Material: Burnout plastic Dimensions: Length - 85mm Diameter - 2mm
7
MM-GB100
Gold bar-round Material: Gold-e Dimensions: Length - 50mm Diameter - 1.90mm
131.
Accessories. MIS offers a wide range of innovative tools and instruments, providing simple and easy solutions for clinicians and lab technicians.
132.
1
4
MT-AL005
MT-SM005
Prosthetic Instruments 1:1
1:3
2
5
MT-TSD10
MT-LM005
1
MT-AL005
4
MT-SM005
Allen key 0.05"
Short motor adapter for 0.05" hex.
Material: Stainless steel Dimensions: Length - 72mm
Material: Stainless steel Dimensions: Length - 24mm
1:2
3
MT-IT100
1:1
6
2
MT-TSD10
5
Screw driver for Titanium ball cap
MT-NB225
MT-LM005
Long motor adapter for 0.05" hex.
Material: Stainless steel Dimensions: Length - 50mm
Material: Stainless steel Dimensions: Length - 33mm
1:1
3
MT-IT100
Closed tray impression coping key
1:1
Material: Stainless steel Dimensions: Length - 16.5mm
6
MT-NB225
Ball attachment anchor key Material: Stainless steel Dimensions: Length - 22mm
MT-NB225 Ball attachment anchor key
1
5
MT-HHR07
MT-IE172
Prosthetic Instruments 1:1
2
1:1
MT-HHR13
6
MT-IE160
1
1:1
3
1:1
4
1:1
2
MT-HDS30
3
MT-HHR07
Material: Stainless steel Dimensions: Length - 22mm
Material: Titanium Dimensions: Length - 27mm
MT-HHR13
6
MT-IE160
Long hand screwdriver for 0.05" hex.
Int. connection abutment extractor, NP
Material: Stainless steel Dimensions: Length - 29mm
Material: Titanium Dimensions: Length - 27mm
MT-HDS30
Short hex. drive 0.05" Material: Stainless steel Dimensions: Length - 16mm
MT-HDL30
Long hex. drive 0.05" 1:1
MT-IE172
Int. connection abutment extractor
MT-HDL30
4
5
Short hand screwdriver for 0.05" hex.
Material: Stainless steel Dimensions: Length - 22mm
134.
1
5
MT-MSD20
MT-CS450
Prosthetic Instruments 1:1
1:4
2
6
MT-HTS10
MT-UN002
1
MT-MSD20
5
3
MT-US002
2 7
6
Stainless steel
MT-HTS10
Technical hex. screw driver
MT-GDM01
Material: Stainless steel Dimensions: Length - 24mm
1:1
3
MT-UW002
1:1
MT-UN002
Int. hex. implant analog NP for universal hand driver
1:4
4
Material:
Material: Stainless steel+Aluminum Dimensions: Length - 120mm
1:1
MT-CS450
Shoulders reamer
Surgical adapter driver
1:3
4
MT-US002
Material: Stainless steel + Plastic Dimensions: Length - 142.5mm
7
MT-GDM01
Int. hex. implant analog SP for universal hand driver
Gingival depth measuring 2/4/6/8 mm
Material: Stainless steel Dimensions: Length - 24mm
Material: Stainless steel Dimensions: Length - 100mm
MT-UW002
Wide int. hex. implant analog for universal hand driver Material: Stainless steel Dimensions: Length - 24mm
MT-MSD20 Surgical adapter driver
1
MT-A4022
2
MT-B4018
3
MT-C3125
Zircon Diamond Burr Set 5 4
MT-F2121
5
MK-DB01
MT-K2023
The Zircon Diamond Burr Set consists of commonly used smooth diamond burrs, required for proper preparation of zircon abutments.
MK-DB01 Zircon Diamond Burr Set
1
MT-A4022
2
MT-B4018
3
MT-C3125
4
MT-F2121
5
MT-K2023
Diamond burr 2.20mm
Diamond burr 1.80mm
Diamond burr 2.50mm
Diamond burr 2.10mm
Diamond burr 2.30mm
136.
Prosthetic Planning Kit MK-0040 The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient's mouth or on implant-level master models. The Titanium superstructures are color coded, in accordance with MIS platform colors: purple for Standard and green for Wide.
MK-0040 Prosthetic Planning Kit
Kit Contents
Pcs:
1
Pcs:
MD-CPK81-1
1
Colored Anatomic 1mm transgingival abutment, h. 8mm, SP 1
1
1
1
1
1
MD-CPK82-2
Colored Anatomic 2mm transgingival abutment, h. 8mm, SP
MD-P0030-7
Colored Esthetic abutment internal hex. 3mm
MD-A0010-8 Colored Esthetic abutment internal hex. 1mm
1
1
1
1
MD-AN151-9
MD-CTP10-5
Colored Narrow profile cementing post
MD-MAC10-6
Colored Standard cementing post
1
Colored Anatomic 2mm transgingival abutment, h. 8mm ,WP
MW-CPK84-18
1
MW-CTP10-19
Colored Esthetic 25 angulated abutment internal hex. 1mm
1
MW-MAC10-20
MD-P1530-13
1
MW-P1510-22
MD-A1510-11 Colored Esthetic 15 angulated abutment internal hex. 1mm
1
MW-CPK82-16
1
MD-AN251-10 Colored 25 Anatomic angulated abutment
1
MW-CPK81-15
Colored Anatomic 1mm transgingival abutment, h. 8mm, WP
MW-CPK83-17
MD-CPK84-4
Colored Anatomic 4mm transgingival abutment, h. 8mm, SP
Pcs:
1
Colored 15 Anatomic angulated abutment
MD-CPK83-3
Colored Anatomic 3mm transgingival abutment, h. 8mm, SP
Pcs:
MD-A2510-12
Colored Esthetic 15 angulated abutment internal hex. 3mm
1
MW-AN151-21
6
MD-GT190
1
MD-P2530-14
Colored Wide 15 anatomic angulated abutment
Guide pin for technician set
Colored Esthetic 25 angulated abutment internal hex. 3mm
Colored Anatomic 3mm transgingival abutment, h. 8mm, WP
Colored Anatomic 4mm transgingival abutment, h. 8mm, WP
Colored Direct conical titanium post for WP
Colored cementing post, WP
Colored Wide esthetic 15 angulated abutment int. hex.1
MK-0040 Prosthetic Planning Kit
138.
Packaging. MCU Control Unit MWH-M0131(230V), MWH-M0132(115V)
The MCU Control Unit is an intelligent drive unit for dental surgical applications, facilitating clean and simple operation. Exclusively designed and made by W&H, the control unit is a highly practical, user-friendly and easily portable device. It offers a maintenance-free surgical micro-motor, advanced programming features, wide speed range, accurate torque control, user-friendly foot control, clearly visible display, integrated coolant pump and more. CE approved and FDA cleared for marketing, the MCU Control Unit is manufactured according to ISO: 9001 requirements and complies with the most stringent safety requirements for medical equipment.
Orange
Change program
Yellow
Change motor direction
Green
Pump ON / OFF
Gray
Start motor
MCU Accessories. MWH-M7559 Surgical contra-angle 20:1 MWH-CAL59 Surgical contra-angle LED 20:1
MWH-2STUB Irrigation system 1/2 way
The MIS MCU core kit comes with: . Control Unit . Foot Pedal . Irrigation Support Rod . Rubber Motor Support . 3 Sterile Irrigation Tubes . Power Cord (2m) . MCU-MIS Control Unit User Manual . Micromotor and Cord Kit The motor features torque limitation for dental implantations (5-50 Ncm); wide speed range of 300-40,000 rpm; integrated coolant pump; maintenance-free.
Peformance is in line with modern clinical developments.
The surgical micromotor features advanced functions such as: programing, working steps and low speed with high torque. Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by the CE, FDA and manufactured under ISO 9001:2008 regulations.
Exclusive design, highly practical and easily portable.
Outstanding simplicity. Clearly visible display panel and function buttons
140.
Crown Set MK-0022 The MIS Crown Set is a resin based cement which combines high retention properties with the ability to remove a restoration if needed. Supplied in an automix, easy-to-use dispensing syringe, the cement sets within 90 seconds and allows easy removal of access material.
MK-0022 Crown Set
Abutments should be sandblasted prior to cementation to achieve maximum retention.
Abutment Holding System Kit MK-0001
The Abutment Holding System enables the convenient grip of prosthetic components to allow simple and easy preparation of ceramic and titanium abutments. The kit includes inserts for all MIS implants connections and platforms.
MK-0001 Abutment Holding System Kit
142.
Prosthetic I ntroduction Case MK-PIC01 The MIS Prosthetic Introduction Case offers a wide variety of MIS prosthetic options. The kit includes stone models representative of common clinical cases, the MIS Prosthetic Planning Kit; with a wide variety of cement retained prosthetic options for use on the models, the MIS Abutment Holding System Kit, and an instructional CD to guide you through the step-by-step prosthetic procedures recommended by MIS.
MK-PIC01 Prosthetic Inroduction Case
Kit Contents
Pcs:
Pcs:
Pcs:
Pcs:
4
MA-ANH17
1
MD-A1510
1
ME-G003
1
4
MA-ANH30
1
MD-A0010
1
ME-G004
12 MM-CP045 Multi-Unit plastic cylinder
1
MA-S1375
2
MD-CP013
1
ME-G005 Full Maxilla
12 MM-PBU10 Plastic bar-ovoid
5
MA-S2375
ME-G006
1
1
MD-CPH13
1
Multi-Unit 17 deg. angulated abutment with hex.
Multi-unit 30 deg. angulated abutment with hex.
Multi-Unit abutment 1mm
Multi-Unit abutment 2mm
2
Esthetic abutment internal hex. 1mm
Direct plastic cyl. without hex. 1
MA-S3375
Direct plastic cylinder with hex.
Multi-Unit abutment 3mm 1
1
Esthetic 15 angulated abutment internal hex. 1mm
MA-S4375
Multi-Unit abutment 4mm
MB-AN152
1
Ball anchor 15 deg. angulated abutment
2
MB-N2375
1
MD-CPK42
Ball attachment anchor 2mm
Anatomic 2mm transgingival abutment, h. 4mm, SP
1
ME-G001
Max - Bridge & Crown screw retained + Angulated
Colored Wide esthetic 15 angulated abutment int. hex.1
ME-G007
1
MK-0001
1
MK-0040
MD-MAC10
Standard cementing post
Mandible - Dolderbar over Multi-Unit abutment
6
MW-AN151-21
Colored Wide 15 anatomic angulated abutment
Max - Ball attachment Angulated & strait abutment
Full Mandible
Abutment Holding System Kit
Prosthetic Planning Kit
MK-CPK42
2mm Complete Prosthetic Kit, h. 4mm, SP
MM-TRU10
Titanium rider-ovoid
10 MT-BK235 Ball attachment anchor key
144.
MGUIDE Set for SEVEN Implant Procedure MG-K001 The MGUIDE Set for SEVEN implants is designed for use with the MGUIDE MORE surgical guides. The computer-based planning procedure enhances accuracy and safety for a smoother implant placement procedure. The drills are designed with built-in stoppers to allow correct preparation to the planned depth and position. The ergonomic drill layout provides an easy to follow preparatory guideline for either hard or soft bone conditions.
MGUIDE MORE Drill Set for SEVEN implant procedure
MGUIDE MORE Tool Kit for internal hex.
146.
MGUIDE Drill Kit for SEVEN Implant Procedure
30
29 24 19 14 28 18
9 1
13 8
3
5 2
23
12
7
17
27
22
4 6 11
16
21
26
10 15 20 25
Kit Contents MGUIDE Drill Kit for SEVEN implant procedure
1
20
13
25
MG-TP047
MG-D1133
MG-D0642
MG-D0650
Guided tissue punch Ø4.7mm
Guided conical drill for implant Ø3.30 L11.5mm
Guided conical drill for implant Ø4.20 L6mm
Guided conical drill for implant Ø5 L6mm
2
14
3
Guided conical drill for implant Ø3.75 L6mm
MG-D0624
Guided conical drill for implant Ø3.75 L10mm
Guided pilot drill Ø2.40 L6mm
6
18 MG-D0824
MG-D1137
Guided pilot drill Ø2.40 L8mm
28
Guided conical drill for implant Ø3.75 L11.5mm
MG-D1150
Guided conical drill for implant Ø4.20 L11.5mm
25 MG-D1037
Guided conical drill for implant Ø5 L10mm
MG-D1142
Guided conical drill for implant Ø3.75 L8mm
17
5
MG-D1050
Guided conical drill for implant Ø4.20 L10mm
MG-D0837
Guided bone mill Ø5.5mm
27
23
16 MG-BM055
Guided conical drill for implant Ø5 L8mm
MG-D1042
MG-D0637
Guided bone mill Ø4.7mm
4
Guided conical drill for implant Ø4.20 L8mm
22
15 MG-BM047
MG-D0850
MG-D0842
Guided conical drill for implant Ø3.30 L13mm
Guided tissue punch Ø5.5mm
26
21 MG-D1333
MG-TP055
Guided conical drill for implant Ø5 L11.5mm
29 MG-D1342
MG-D1350
Guided conical drill for implant Ø4.20 L13mm
Guided conical drill for implant Ø5 L13mm
30 MG-DLG55
Guided drill length gauge dia. 5.5mm
19
7 MG-D1024
Guided pilot drill Ø2.40 L10mm
8 MG-D1124
Guided pilot drill Ø2.40 L11.5mm
9 MG-D1324
Guided pilot drill Ø2.40 L13mm
10 MG-D0633
Guided conical drill for implant Ø3.30 L6mm
11 MG-D0833
Guided conical drill for implant Ø3.30 L8mm
12 MG-D1033
Guided conical drill for implant Ø3.30 L10mm
MG-D1337
Guided conical drill for implant Ø3.75 L13mm
148.
MGUIDE Tools Kit for Internal Hex.
FIXATION DRILL ø2
FIXATION PINS
TEMPLATE ANCHORING SCREWS FIXATION & ANCHORING TOOLS
9
{
{
11
10
NP
{
2
N
ER
D
SC
IV
HA
R REW D
NP
OL . T I N S E RT
S OL O
DI R
T I N R T. T SE
T R A C TO R
S
OL
EX
SPARE
O
MO
TO
6
TO
HE
3
EC
8
7
4 TC RA
1
INTERNAL HEXAGON TOOLS
5
R I N R T. T SE
4
3
Kit Contents MGUIDE tools kit for int. hex.
1
5 MG-GRI01
8 MT-RI030
MT-HHR13
Guided direct ratchet insertion tool, int. hex.
10
9
2
6 Guided insertion tool extractor, int. hex.
Guided direct ratchet insertion tool, int. hex., NP
3
7 MG-GMI10
Guided motor insertion tool, int. hex.
4 MG-GRI10
Guided ratchet insertion tool, int. hex.
MG-IE160
Guided insertion tool extractor, int. hex., NP
MGUIDE fixation pin, Ø2mm
11 MT-TDN20
MG-IE172
MG-GRN01
MG-FP020
Ratchet wrench
Long hand screwdriver for 0.05" hex.
Pilot drill 2mm external irrigation
MG-TAS55
MGUIDE template anchoring screw, Ø5.5mm
150.
Bone Augmentation Materials. Flexibility is a key feature of the MIS expanded 4BONE速 product range. The name 4BONE represents an entire family of quality regenerative biomaterial solutions consisting of bovine, porcine and synthetic based products that offer solutions for a wide range of bone regeneration procedures.
152.
速
XBM
0.5cc - 4cc Tube
4BONE 速 XBM - Anorganic Bovine Bone Matrix
4BONE XBM is an anorganic bovine bone mineral matrix for use in guided bone regeneration procedures. 4BONE XBM is recommended for use as a bone void filler or augmentation material in periodontal defects and dental implant procedures.
4B-X2505 XBM vial 0.5cc, granule size: 0.25-1mm 4B-X2510 XBM vial 1.0cc, granule size: 0.25-1mm 4B-X2525 XBM vial 2.5cc, granule size: 0.25-1mm 4B-X2540 XBM vial 4.0cc, granule size: 0.25-1mm 4B-X1010 XBM vial 1.0cc, granule size: 1-2mm 4B-X1025 XBM vial 2.5cc, granule size: 1-2mm
®
BCH
0.5cc - 2.5cc
4BONE ® BCH - Synthetic Bone Substitute
4BONE BCH is a fully synthetic bioactive bone substitute composed of chemical synthesis of 60% HA and 40% ß-TCP. It is recommended for use as a bone augmentation material in dental implant procedures.
BS-4BS01 BCH syringe 0.5cc, granule size: 0.5-1mm BS-4BS1S BCH tube 1cc, granule size: 0.5-1mm BS-4BS25 BCH tube 2.5cc, granule size: 1-2mm
New packaging available in 2014
154.
0.5cc - 1cc
BONDBONE - Bonding Graft Material 速
BONDBONE速 is an innovative synthetic bone grafting material composed of biphasic calcium sulfate. Due to it novel engineering process, BONDBONE has excellent handling properties. The initial pliable paste is fast setting and is not affected by the presence of blood and saliva.
BS-BB005 BONDBONE速 0.5cc, 3 drivers BS-BB010 BONDBONE速 1cc, 3 drivers
New packaging available in 2014
B
速
RCB
4BONE 速 RCB - Resorbable Conforming Barrier Membrane
4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. 4BONE RCB is a fully resorbable and adaptable cell occlusive barrier used in guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
4B-C1520 RCB - 15X20mm 4B-C2030 RCB - 20X30mm 4B-C3040 RCB - 30X40mm
156.
速
RSB
4BONE 速 RSB - Resorbable Collagen Barrier Membrane
4BONE RSB is a bioresorbable, cell occlusive membrane engineered from highly purified bovine collagen. It is indicated for use as a barrier membrane in guided tissue regeneration and guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
4B-S1520 RSB - 15X20mm 4B-S2030 RSB - 20X30mm 4B-S3040 RSB - 30X40mm
速
4BONE 速 RCM - Resorbable Collagen Membrane
4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. 4BONE RCB is a fully resorbable and adaptable cell occlusive barrier used in guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
Res Col Mem
BR-C1525 RCM - 15X25mm BR-C2030 RCM - 20X30mm BR-C3040 RCM - 30X40mm
FDA clearance for marketing pending
158.
速
TAPE
4BONE 速 TAPE - Resorbable Collagen Wound Dressing
4BONE TAPE is used following oral surgical procedures to aid in wound healing. The Tape is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
4B-T0010 TAPE 10/box., Size: 2.5cm x 7.5cm, 1mm thick
速
PLUG
4BONE 速 PLUG - Resorbable Collagen Wound Dressing
4BONE PLUG is used following oral surgical procedures to aid in wound healing. The plug is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
4B-P0010 PLUG 10/box. Size: 1cm x 2cm
160.
Appendix.
162. 162.
Alloy Compositions
Material
Titanium Alloy Ti 6Al 4V ELI
Gold-a
Gold-s
Gold-e
Application
C, K
L, G, K
L, G, K
L, K
Balance Balance
Composition
Balance 0.08
0.013 5.5-6.5
Hardness
Legend: C–bonding K–resin L–soldering G–casting onto
Restorative Components
Guidelines for usage of MIS Restorative Components
Location
Crown/ Implant Inclination Ratio
Gingival Height
Catalog Number
Abutment description
Anterior Maxilla
Anterior Mandible
Premolars and Molars
Canine, Premolars and Molars
15° or 25°
15° or 25°
Up to 2.5°
Up to 2mm buccal Up to 4mm palatal
Up to 4mm buccal Up to 6mm palatal
Adjustable, based on abutment preparation
Up to 2mm buccal Up to 6mm lingual/palatal
Adjustable, based on abutment preparation
Adjustable, based on abutment preparation
MD-A1510 MD-A2510
MD-P1530 MD-P2530
MD-CTP10
MD-A0010 MD-P0030
MD-MAC10 MD-WMAC1
MD-MACF1
Esthetic angulated abutment
Esthetic angulated abutment
Conical post abutment
Esthetic abutment
Standard post abutment
Friction fit post platform switching
Up to 3.5°
15° or 25°
Up to 4°
Up to 2mm
Up to 2mm buccal Up to 4mm lingual
According to gingival height available in heights of 1,2,3,4mm
MD-GPC10
MD-AN151 MD-AN251
MD-CPK41 MD-CPK42 MD-CPK43 MD-CPK44 MD-CPK61 MD-CPK62
Angulated abutment
Anatomic transgingival abutment
MD-GP010
Screw-retained gold-plastic abutment
MD-CPK63 MD-CPK64 MD-CPK81 MD-CPK82 MD-CPK83 MD-CPK84
*Recommendation only
164.
Diameter and Platform Color Coding
Tube cap is marked with a distinctive colored label that indicates the diameter, length and platform of the implant.
Color codes: Wide platform Standard platform Narrow platform
Implant diameter (mm) Implant length (mm)
Implant platform (Standard/Wide/Narrow/ and One Piece)
Implant diameter and platform indication Tube cap is marked with a distinctive colored label that indicates the diameter, length and platform of the implant.
Label Description
Catalog no. Type of implant & connection Implant diameter & length Lot no. Date of manufacture Use-by date CE mark
Three labels are included between the inner and outer tubes. Labels specify product catalog number, lot number and use-by date.
Naming and labeling explanations Date of manufacture Use-by date Type of implant & connection
Catalog no. Qty. Lot no. Barcode
166.
er factur u n a M rk ity ma m r o f on ean c p o r er u E numb g o l a t Ca
code Batch terile non-s
tion radia ir a amm sing g u tist d e d den e s Steriliz n e f a lic der o r o e aged th is dam or on e y g b a ack Sale se if p tu Do no
Only
ture nufac a m f o Date use Single
use ns for o ti c u tr ee ins rilize tion, s n Reste e tt t o A N Do date
y Use-b . f temp limit o r e p Up ation . limit Temp
MIS Manuals Symbol Index
20% 50%
80%
90%
Y
ANTI R O T A T I
168.
Gui de
Index.
WP
4BONE
L A N R E EX T Gu ide
PATC H
M G U I D E
EXTRA
UNO
INDEX.
Alphabetic Order
A 5 B
Size Size
Cat. No.
Page
Abrahami drill guide kit Angulated abutment 20 degree internal hex. NP 6mm Angulated abutment 25 degree internal hex. 10.50mm Angulated abutment 15 degree, internal hex. 11mm Abutment analog crown height 6mm, NP Abutment holding system kit Allen key 0.05 72mm Anatomic 1mm transgingival abutment, h. 6mm NP 6mm Anatomic 1mm transgingival abutment, h. 6mm SP Anatomic 2mm transgingival abutment, h. 4mm SP
MK-0011 MN-AN020 MD-AN251 MD-AN151 MN-RSM60 MK-0001 MT-AL005 MN-CPK61 MD-CPK61 MD-CPK42
60 77 92 92 74 141/143 132 74 88 143
Ball anchor 15deg. angulated abutment 10mm Ball anchor 25deg. angulated abutment 10mm Ball attachment analog internal hex. 15.1mm Ball attachment anchor internal hex. 1mm 1mm Ball attachment anchor internal hex. 2mm 2mm Ball attachment anchor internal hex. 2mm. NP 2mm Ball attachment anchor internal hex. 3mm 3mm Ball attachment anchor internal hex. 3mm. NP 3mm Ball attachment anchor internal hex. 4mm 4mm Ball attachment anchor internal hex. 4mm. NP 4mm Ball attachment anchor internal hex. 5mm 5mm Ball attachment anchor key 22mm Body try in 2.40mm for tapered impl. procedure Body try in 2.80mm for tapered impl. procedure Body try in 2mm for tapered impl. procedure Body try in 3.20mm for tapered impl. procedure Body try in 3mm for tapered impl. procedure Body try in 4.50mm for tapered impl. procedure Body try in 4mm for tapered impl. procedure Body try in 5mm for tapered impl. procedure Bone compression kit Bone harvest drill dia. 2.80mm 2.80mm Bone harvest drill dia. 3.20mm 3.20mm Bone harvest drill dia. 3.80mm 3.80mm Bone harvest drill dia. 4.50mm 4.50mm Bridge only Ti base int. hex connection, NP Bridge only Ti base int. hex connection, SP Burn out plastic cap Burn out plastic cap Burn out plastic cap, NP 6mm Burn out anti rotation plastic cap Burn out anti rotation plastic cap
MB-AN152 MB-AN252 MB-RS375 MB-N1375 MB-N2375 MB-N2330 MB-N3375 MB-N3330 MB-N4375 MB-N4330 MB-N5375 MT-BK235 MT-BTT24 MT-BTT28 MT-BTT20 MT-BTT32 MT-BTT30 MT-BTT45 MT-BTT40 MT-BTT50 MK-0020 MT-BC280 MT-BC320 MT-BC380 MT-BC450 MN-TB002 MD-TB002 MD-IC040 MW-IC040 MN-IC040 MW-ICH40 MD-ICH40
105/143 105 84/105/126 105 105/143 84 105 84 105 84 105 67/143 53/65 53 65 53 65 53 53 53 62/63 57 57 57 57 79 95 88 112 74 112 88
170.
INDEX.
Alphabetic Order
Size
C
Cat. No.
Page
Burn out anti rotation plastic cap for Ti base, SP Burn out anti rotation plastic cap for Ti base, WP Burn out anti rotation plastic cap, NP 6mm
GI-SCH11 GI-WCH11 MN-ICH40
78/79/94/95 118/119 74
BONE AUGMENTATION MATERIALS 4BONE synthetic bone substitute 0.5cc 4BONE XBM Xenograft 0.25-1mm granules , 2.5cc 4BONE XBM Xenograft 0.25-1mm granules , 4cc 4BONE XBM Xenograft 0.25-1mm granules, 0.5cc 4BONE XBM Xenograft 0.25-1mm granules, 1cc 4BONE XBM Xenograft 1-2mm granules, 1cc 4BONE XBM Xenograft 1-2mm granules, 2.5cc
BS-4BS01 4B-X2525 4B-X2540 4B-X2505 4B-X2510 4B-X1010 4B-X1025
150 152 152 152 152 152 152
Ceramic marking drill 28.50mm Ceramic pilot drill 33.50mm Ceramic twist drill 35mm Closed tray impression coping key 16.5mm Colored cementing post WP Colored Direct conical titanium post for WP Colored Esthetic 15 angulated abutment internal hex. 1mm Colored Esthetic 15 angulated abutment internal hex. 3mm Colored Esthetic 25 angulated abutment internal hex. 1mm Colored Esthetic 25 angulated abutment internal hex. 3mm Colored Esthetic abutment internal hex. 1mm Colored Esthetic abutment internal hex. 3mm Colored Narrow cementing post Colored Standard cementing post Colored Wide 15 anatomic angulated abutment Colored Wide esthetic 15 angulated abutment int. hex.1 Colored 15 Anatomic angulated abutment Colored 25 Anatomic angulated abutment Colored Anatomic 1mm transgingival abutment, h. 8mm SP Colored Anatomic 1mm transgingival abutment, h. 8mm WP Colored Anatomic 2mm transgingival abutment, h. 8mm SP Colored Anatomic 2mm transgingival abutment, h. 8mm WP Colored Anatomic 3mm transgingival abutment, h. 8mm SP Colored Anatomic 3mm transgingival abutment, h. 8mm WP Colored Anatomic 4mm transgingival abutment, h. 8mm SP Colored Anatomic 4mm transgingival abutment, h. 8mm WP Complete prosthetic kit 4mm, crown height 4mm, SP Complete prosthetic kit 4mm, crown height 4mm, WP Complete prosthetic kit 4mm, crown height 6mm, SP Complete prosthetic kit 4mm, crown height 6mm, WP
MT-CRD21 43 MT-CRD20 43 MT-CRD28 43 MT-IT100 67/132 MW-MAC10-20 137 MW-CTP10-19 137 MD-A1510-11 137 MD-P1530-13 137 MD-A2510-12 137 MD-P2530-14 137 MD-A0010-8 137 MD-P0030-7 137 MD-CTP10-5 137 MD-MAC10-6 137 MW-AN151-21 137/143 MW-P1510-22 137 MD-AN151-9 137 MD-AN251-10 137 MD-CPK81-1 137 MW-CPK81-15 137 MD-CPK82-2 137 MW-CPK82-16 137 MD-CPK83-3 137 MW-CPK83-17 137 MD-CPK84-4 137 MW-CPK84-18 137 MK-CPK44 89 MK-WPK44 113 MK-CPK64 89 MK-WPK64 113
Size Complete prosthetic kit 4mm, crown height 8mm, SP Complete prosthetic kit 4mm, crown height 8mm, WP Complete prosthetic kit 3mm, crown height 4mm, SP Complete prosthetic kit 3mm, crown height 4mm, WP Complete prosthetic kit 3mm, crown height 6mm, SP Complete prosthetic kit 3mm, crown height 6mm, WP Complete prosthetic kit 3mm, crown height 8mm, SP Complete prosthetic kit 3mm, crown height 8mm, WP Complete prosthetic kit, crown height 4mm, SP Complete prosthetic kit 2mm, crown height 4mm, WP Complete prosthetic kit 2mm, crown height 6mm, SP Complete prosthetic kit 2mm, crown height 6mm, WP Complete prosthetic kit 2mm, crown height 8mm, SP Complete prosthetic kit 2mm, crown height 8mm, WP Complete prosthetic kit 1mm, crown height 4mm, SP Complete prosthetic kit 1mm, crown height 4mm, WP Complete prosthetic kit 1mm, crown height 6mm, SP Complete prosthetic kit 1mm, crown height 6mm, WP Complete prosthetic kit 1mm, crown height 8mm, SP Complete prosthetic kit 1mm, crown height 8mm, WP Concave sinus screw 3.50mm Concave sinus screw 3mm Concave sinus screw 4mm Convex bajonet osteotome with stopper dia. 2mm Convex bajonet osteotome with stopper dia. 3.25mm Convex bajonet osteotome with stopper dia. 3mm Convex bajonet osteotome with stopper dia. 4mm Convex compress screw Convex compress screw Convex compress screw Convex compress screw Convex osteotome with stopper dia. 2mm Convex osteotome with stopper dia. 3.25mm Convex osteotome with stopper dia. 3mm Convex osteotome with stopper dia. 4mm Convex osteotomes set Countersink for NP Countersink for standard platform 26mm Countersink for wide platform 26.80mm Crown set Custom premolar abutment set int. hex. connection, SP Custom premolar abutment set int. hex. connection, WP
Cat. No.
Page
MK-CPK84 MK-WPK84 MK-CPK43 MK-WPK43 MK-CPK63 MK-WPK63 MK-CPK83 MK-WPK83 MK-CPK42 MK-WPK42 MK-CPK62 MK-WPK62 MK-CPK82 MK-WPK82 MK-CPK41 MK-WPK41 MK-CPK61 MK-WPK61 MK-CPK81 MK-WPK81 MO-SO350 MO-SO300 MO-SO400 MO-CBS20 MO-CBS32 MO-CBS30 MO-CBS40 MO-CO160 MO-CO200 MO-CO240 MO-CO280 MO-CS200 MO-CS325 MO-CS300 MO-CS400 MK-0024 MT-CSN33 MT-GDN33 MT-GDN50 MK-0022 MK-SPZ4 MK-WPZ4
89 113 89 113 89 113 89 113 89/143 113 89 113 89 113 89 113 88/89 112/113 89 113 63 63 63 50 50 50 50 50/63 63 63 63 50 50 50 50 69 42/50/55/56 42/50/53/55/56 32/42/50/53/55/56 140 100/101 122/123
172.
INDEX.
Alphabetic Order
D
Size Diamond burr 1.80mm Diamond burr 2.10mm Diamond burr 2.20mm Diamond burr 2.30mm Diamond burr 2.50mm Direct conical titanium post for WP 10.50mm Direct gold abutment without hex. WP 18.20mm Direct gold plastic cylinder with hex. int. hex., NP Direct gold plastic cylinder with hex. internal hex. 16.20mm Direct gold plastic cylinder without hex. int. hex., NP Direct gold plastic cylinder without hex. internal hex. 18.20mm Direct gold prosthetic screw internal hex. 7.70mm / 20 Direct impression coping for closed tray Direct impression coping for closed tray int. hex. WP Direct impression coping for closed tray internal hex. 11mm Direct impression coping for closed tray internal hex. Direct impression coping for open tray internal hex. 13mm Direct impression coping for open tray internal hex. NP 13mm Direct impression coping guide pin internal hex. Direct impression coping guide pin internal hex. 16.5mm Direct impression coping guide pin internal hex. 21.30mm Direct impression coping guide pin internal hex. NP Direct Impression coping h. 8mm, WP 8mm Direct Impression coping plastic cap, NP Direct impression coping Set for closed tray NP Direct Impression coping, h. 8mm, SP Direct plastic cylinder int. Hex. with hex. NP Direct plastic cylinder int. Hex. without hex. NP Direct plastic cylinder internal hex. with hex. 11mm Direct plastic cylinder with hex. Dia.6mm WP 13mm Direct plastic cylinder without hex. Dia. 6mm, WP 13mm Direct plastic cylinder without hex. internal hex. 11mm Direct press fit for closed tray NP Direct press fit for closed tray WP 13mm Direct prosthetic screw Int. hex. NP 6mm Direct prosthetic screw internal hex. 7.60mm / 30 Direct temporary cylinder with hex. internal hex. 11mm Direct temporary plastic cylinder internal hex. 12mm Double metal housing 2.4mm Drill extender 28.70mm Drill stopper kit for 10mm length Seven implant procedure Drill stopper kit for 11.5mm length Seven implant procedure Drill stopper kit for 13mm length Seven implant procedure Drill stopper kit for 6mm length Seven implant procedure Drill stopper kit for 8mm length Seven implant procedure Drill stopper kit for Seven implant, SP
Cat. No.
Page
MT-B4018 MT-F2121 MT-A4022 MT-K2023 MT-C3125 MW-CTP10 MW-GP010 MN-GPC10 MD-GPC10 MN-GP010 MD-GP010 MD-G0220 MN-IT100 MW-IT300 MD-IT100 MD-IT300 MD-I0375 MN-I0330 MN-G0160 MD-GP100 MD-G0213 MN-GP100 MW-IC800 MN-IC600 MN-IT300 MD-IC800 MN-CPH13 MN-CP013 MD-CPH13 MW-CPH60 MW-CP060 MD-CP013 MN-PF330 MW-PF550 MN-S0160 MD-S0220 MD-TCH13 MD-TPH50 MB-DMH10 MT-DE001 MK-SDS10 MK-SDS11 MK-SDS13 MK-SDS06 MK-SDS08 MK-BS001
135 135 135 135 135 115 114 76 90 76 90 90/92/114/116 73 110/111 87 87 87 73 73 87/111 87/111 73 112 74 73 88 76 76 90/143 114 114 90/143 73 111 72/76/77/78/79/8 50/72/90/92/94/95/98 90 90 84/106/127 45/53/55 59 59 59 59 59 58
E F G
Size
Cat. No.
Page
Esthetic 15 angulated abutment internal hex. 1mm Esthetic 15 angulated abutment internal hex. 3mm Esthetic 25 angulated abutment internal hex. 1mm Esthetic 25 angulated abutment internal hex. 3mm Esthetic abutment internal hex. 1mm Esthetic abutment internal hex. 3mm
11.10mm 13.10mm 11.10mm 13.10mm 11mm 13mm
MD-A1510 MD-P1530 MD-A2510 MD-P2530 MD-A0010 MD-P0030
92/143 92 92 92 91/143 91
Friction fit cementing post platform switching, SP
13mm
MD-MACF1
91
Gingival depth measuring 2/4/6/8 mm Gold ball cap 2.4mm Gold bar-ovoid 50mm Gold bar-round 50mm Gold rider-ovoid 50mm Gold rider-round 2.5mm Guide pin for technician set Guided bone mill dia. 5.5mm Guided bone mill dia.4.7mm Guided conical drill for imp. dia.3.30 L 10mm Guided conical drill for imp. dia.3.30 L 11.50mm Guided conical drill for imp. dia.3.30 L 13mm Guided conical drill for imp. dia.3.30 L 6mm Guided conical drill for imp. dia.3.30 L 8mm Guided conical drill for imp. dia.3.75 L 10mm Guided conical drill for imp. dia.3.75 L 6mm Guided conical drill for imp. dia.3.75 L 8mm Guided conical drill for imp. dia.4.20 L 10mm Guided conical drill for imp. dia.4.20 L 11.50mm Guided conical drill for imp. dia.4.20 L 13mm Guided conical drill for imp. dia.4.20 L 6mm Guided conical drill for imp. dia.4.20 L 8mm Guided conical drill for imp. dia.5 L 10mm Guided conical drill for imp. dia.5 L 11.50mm Guided conical drill for imp. dia.5 L 13mm Guided conical drill for imp. dia.5 L 6mm Guided conical drill for imp. dia.5 L 8mm
MT-GDM01 MB-GPS10 MM-GBU10 MM-GB100 MM-GRU10 MM-TC100 MD-GT190 MG-BM055 MG-BM047 MG-D1033 MG-D1133 MG-D1333 MG-D0633 MG-D0833 MG-D1037 MG-D0637 MG-D0837 MG-D1042 MG-D1142 MG-D1342 MG-D0642 MG-D0842 MG-D1050 MG-D1150 MG-D1350 MG-D0650 MG-D0850
131/134 84/106/127 130 130 130 130 137 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147
174.
INDEX.
Alphabetic Order
H I L
Cat. No.
Page
Guided direct ratchet insertion tool, int. hex. Guided direct ratchet insertion tool, int. hex., NP Guided Drill Length Gauge dia. 5.5mm Guided insertion tool extractor, int. hex Guided insertion tool extractor, int. hex, NP Guided motor insertion tool, int. hex. connection Guided pilot drill dia.2.40 L 10mm Guided pilot drill dia.2.40 L 11.50mm Guided pilot drill dia.2.40 L 13mm Guided pilot drill dia.2.40 L 6mm Guided pilot drill dia.2.40 L 8mm Guided ratchet insertion tool, int. hex. connection Guided tissue punch dia. 4.7mm Guided tissue punch dia. 5.5mm
MG-GRI01 MG-GRN01 MG-DLG55 MG-IE172 MG-IE160 MG-GMI10 MG-D1024 MG-D1124 MG-D1324 MG-D0624 MG-D0824 MG-GRI10 MG-TP047 MG-TP055
149 149 147 149 149 149 147 147 147 147 147 149 147 147
Hand wrench 10mm Hand wrench square connection Hex. ratchet long adapter for int. hex. connection 22mm Hex. ratchet long adapter for int. hex. connection Hex. ratchet long adapter for int. hex. connection, NP Hex. ratchet short adapter for int. hex. connection 16mm
MT-HW001 MT-SHA10 MT-MRH20 MT-MRH25 MT-NRH20 MT-MRH10
45 8/10/13/16/18/45/46 45 55 8/16/45/53 45
Implant analog internal hex. 12mm Implant analog internal hex. NP Implant Direction Indicator 15mm Implant site depth probe 8/10/11.5/13/16mm 100mm Impression coping for closed tray internal hex. WP 11mm Impression coping for open tray internal hex. WP 13mm Int. connection abutment extractor 27mm Int. connection abutment extractor, NP Int. hex. implant analog for universal hand driver Int. hex. implant analog NP for universal hand driver
MD-RSM10 MN-RSM10 MT-DI001 MT-BTI10 MW-IT100 MW-I0470 MT-IE172 MT-IE160 MT-US002 MT-UN002
72/87/94/95 72/73/78/79 46/53/67 48 111 111 67/133 133 67/134 134
Locator standard abutment, 5mm Locator wide abutment, 5mm Locator standard abutment, 6mm Locator wide abutment, 6mm Locator standard abutment, 4mm Locator wide abutment, 4mm
MB-SZL05 MB-WZL05 MB-SZL06 MB-WZL06 MB-SZL04 MB-WZL04
108 128 108 128 108 128
5mm 5nm 6mm 6nm 4mm 4nm
Size Locator standard abutment, 3mm 3mm Locator wide abutment, 3mm 3nm Locator standard abutment, 2mm 2mm Locator wide abutment, 2mm 2nm Locator standard abutment, 0mm 0mm Locator wide abutment, 0mm 0nm Locator standard abutment, 1mm 1mm Locator wide abutment, 1mm 1nm Locator abutment 0mm hgt, NP abutment Locator abutment 1.0mm hgt, NP Locator abutment 2.0mm hgt, NP Locator abutment 3.0mm hgt, NP Locator abutment 4.0mm hgt, NP Locator abutment 5.0mm hgt, NP Locator abutment 6.0mm hgt, NP Locator black processing replacement male (4 Pack) 1.80mm Locator core tool Locator extended range replacement male green (4 Pack) 1.80mm Locator extra light extended range male red (4 Pack) 1.80mm Locator extra light retention (4 Pack) 1.80mm Locator female analog 4mm dia. (4 Pack) 10.40mm Locator female analog 5mm dia. (4 Pack) 10.40mm Locator impression coping (4 Pack) 4.50mm Locator light retention replacement male pink (4 Pack) 1.80mm Locator male processing package (2 Pack) 1.80mm Locator parallel post (4 Pack) 15mm Locator replacement male clear (4 Pack) 1.80mm Locator torque wrench driver long 21mm Locator torque wrench driver short 15mm Long cross driver for orthodontic screws Long direct hand and ratchet hex. key Long hand screwdriver for 0.05 hex. 29mm Long hex. drive 0.05 22mm Long insertion tool, int. hex. Connection Long motor key adapter 0.05 30mm Long prosthetic screw internal hex. 14mm / 30
Cat. No.
Page
MB-SZL03 MB-WZL03 MB-SZL02 MB-WZL02 MB-SZL00 MB-WZL00 MB-SZL01 MB-WZL01 MB-NZL00 MB-NZL01 MB-NZL02 MB-NZL03 MB-NZL04 MB-NZL05 MB-NZL06 MM-LBP10 MM-LCT10 MM-LER10 MM-LELE1 MM-LEL10 MM-LFA40 MM-LFA50 MM-LIC10 MM-LLR10 MM-LMP02 MM-LPP10 MM-LRM10 MM-LSD21 MM-LSD15 MT-LCD20 MT-HMR10 MT-HHR13 MT-HDL30 MT-HLI10 MT-LMK13 MD-S0224
108 128 108 128 108 128 108 128 85 85 85 85 85 85 85 86/109/129 67/85/108 86/109/129 86/109/129 86/109/129 85/86/108/109 128 85/108/128 86/109/129 85/108/128 86/109/129 86/109/129 67/86/109/129 67/86/109/129 29 46/53 67/133/149 46/67/133 8/10/13/16/45/53/55/63 67/131 90/92/114/116
176.
INDEX.
Alphabetic Order
M
Cat. No. M4 Advanced Surgical Kit M4 Drilling Set M4 internal hex. Implant 6mm M4 internal hex. Implant 6mm M4 internal hex. Implant 6mm M4 internal hex. Implant 8mm M4 internal hex. Implant 8mm M4 internal hex. Implant 8mm M4 internal hex. Implant 8mm M4 internal hex. Implant 10mm M4 internal hex. Implant 10mm M4 internal hex. Implant 10mm M4 internal hex. Implant 10mm M4 internal hex. Implant 10mm M4 internal hex. Implant 11.50mm M4 internal hex. Implant 11.50mm M4 internal hex. Implant 11.50mm M4 internal hex. Implant 11.50mm M4 internal hex. Implant 11.50mm M4 internal hex. Implant 13mm M4 internal hex. Implant 13mm M4 internal hex. Implant 13mm M4 internal hex. Implant 13mm M4 internal hex. Implant 13mm M4 internal hex. Implant 16mm M4 internal hex. Implant 16mm M4 internal hex. Implant 16mm M4 internal hex. Implant 16mm Mallet with solid-plastic insert 28.50mm Marking drill 1.90mm 34mm Marking drill 1.90mm external irrigation 34mm Medium prosthetic screw internal hex. 12mm / 30 MGUIDE fixation pin dia. 2.0mm MGUIDE set for Seven implant procedure Mini prosthetic screw internal hex. 6.90mm / 30 MIS Physiuo 230 V Mountless Basic Surgical Kit Multi-unit 17deg. angulated abutment with hex. Multi-unit 30deg. angulated abutment with hex. Multi-unit abutment 1mm 1mm / 30-35 Multi-unit abutment 2mm 2mm / 30-35 Multi-unit abutment 3mm 3mm / 30-35 Multi-unit abutment 4mm 4mm / 30-35 Multi-unit abutment analog 12mm Multi-unit bar gold coping 3.20mm
Page
MK-0016 54 MK-0014 56 MF4-06420 18/20 MF4-06500 21/22 MF4-06600 21/23 MF4-08375 18/19 MF4-08420 18/20 MF4-08500 21/22 MF4-08600 21/23 MF4-10330 16/17 MF4-10375 18/19 MF4-10420 18/20 MF4-10500 21/22 MF4-10600 21/23 MF4-11330 16/17 MF4-11375 18/19 MF4-11420 18/20 MF4-11500 21/22 MF4-11600 21/23 MF4-13330 16/17 MF4-13375 18/19 MF4-13420 18/20 MF4-13500 21/22 MF4-13600 21/23 MF4-16330 16/17 MF4-16375 18/19 MF4-16420 18/20 MF4-16500 21/22 MT-MAL10 48 MT-TD110 42 MT-TDN19 42/53/55 MD-S0222 90/92/114/116 MG-FP020 149 MG-K001 144 MD-S0200 90/92/114/116 MWH-M0131/2 138 MK-0016 54 MA-ANH17 103/143 MA-ANH30 103/143 MA-S1375 103/143 MA-S2375 103/143 MA-S3375 103/143 MA-S4375 103/143 MA-RSM10 102/124 MM-BGC45 103/125
Size
N O
Cat. No.
Page
Multi-unit direct gold 15mm Multi-unit direct prosthetic gold screw 3.70mm /20 Multi-unit direct prosthetic screw 3.70mm /25 Multi-unit healing cap 3mm Multi-unit impression coping for closed tray 11.70mm Multi-unit impression coping for open tray Multi-unit key 22mm Multi-unit plastic cylinder 10mm Multi-Unit temporary cylinder 10mm
MM-MG450 MM-G0330 MM-S0330 MH-00450 MM-IT450 MM-IO450 MT-MUK02 MM-CP045 MM-T0450
103/125 103/125 103/125 103/125 102/124 102/124 67/102/125 103/125/143 103/1244
Narrow ball attachment key 5mm Narrow cementing post 10.50mm Narrow prosthetic kit 4mm, crown height 4mm, NP Narrow prosthetic kit 4mm, crown height 6mm, NP Narrow prosthetic kit 3mm, crown height 4mm, NP Narrow prosthetic kit 3mm, crown height 6mm, NP Narrow prosthetic kit 2mm, crown height 4mm, NP Narrow prosthetic kit 2mm, crown height 6mm, NP Narrow prosthetic kit 1mm, crown height 6mm, NP Narrow prosthetic kit 1mm, crown height 4mm, NP 1mm Narrow platform cementing post, NP 6mm Narrow profile temporary plastic abutment, SP Narrow profile temporary plastic abutment, WP Narrow profle temporary plastic abutment, NP
MT-NB225 MD-CTP10 MK-NPK44 MK-NPK64 MK-NPK43 MK-NPK63 MK-NPK42 MK-NPK62 MK-NPK61 MK-NPK41 MN-MAC10 MD-TPA12 MW-TPA12 MN-TPA12
72/84/105/126/132 91 75 75 75 75 75 75 74/75 75 77 90 114 76
Ortho anchor pilot drill 1mm 1mm Orthodontic Anchor Screw 1.6mm Orthodontic Anchor Screw 1.6mm Orthodontic Anchor Screw 1.6mm Orthodontic Anchor Screw 1.6mm OT Equator analog OT Equator impression transfer cap OT Equator impression transfer cap OT Equator insertion tool OT Equator int. hex. kit, gingiva height 1mm, NP OT Equator int. hex. kit, gingiva height 1mm, SP OT Equator int. hex. kit, gingiva height 1mm, WP OT Equator int. hex. kit, gingiva height 2mm, NP OT Equator int. hex. kit, gingiva height 2mm, SP OT Equator int. hex. kit, gingiva height 3mm, NP OT Equator int. hex. kit, gingiva height 3mm, SP
MT-TDO01 MG2-06160 MG2-08160 MG2-10160 MG2-12160 OE-RSM60 OE-IC001 OE-IC002 ET-IT001 MK-NOE1 MK-SOE1 MK-WOE1 MK-NOE2 MK-SOE2 MK-NOE3 MK-SOE3
29 29 29 29 29 81/97/121 81/97/121 81/97/121 81/97/121 80 96 120 80 96 80 96
178.
INDEX.
Alphabetic Order
P R
Cat. No.
Page
OT Equator int. hex. kit, gingiva height 3mm, WP OT Equator int. hex. kit, gingiva height 4mm, NP OT Equator int. hex. kit, gingiva height 4mm, SP OT Equator int. hex. kit, gingiva height 5mm, NP OT Equator int. hex. kit, gingiva height 5mm, SP OT Equator int. hex. kit, gingiva height 5mm, WP
MK-WOE3 MK-NOE4 MK-SOE4 MK-NOE5 MK-SOE5 MK-WOE5
120 80 96 80 96 120
Parallel pin 24mm Parallel pin dia.2.40/3mm for tapered impl. procedure Pilot drill 2mm external irrigation 37.30mm Pilot drill with built in stopper dia.2.40 height 10mm Pilot drill with built in stopper dia.2.40 height 11.5mm Pilot drill with built in stopper dia.2.40 height 13mm Pilot drill with built in stopper dia.2.40 height 16mm Pilot drill with built in stopper dia.2.40 height 6mm Pilot drill with built in stopper dia.2.40 height 8mm Plastic ball cap 3.5mm Plastic bar-ovoid 80mm Plastic bar-round 85mm Plastic disc for ball attachment Plastic healing cap crown h. 6mm, NP Plastic healing cap crown h. 6mm, SP Plastic mounting sleeve 2mm Premolar esthetic Ti abutment int. hex. connection, SP Premolar esthetic Ti abutment int. hex. connection, WP Premolar zirconia crown, SP Press fit impression coping for closed tray 13mm Prosthetic introduction case Prosthetic planning kit Prosthetic tools kit
MT-PP001 MT-PP240 MT-TDN20 MT-P2410 MT-P2411 MT-P2413 MT-P2416 MT-P2406 MT-P2408 MB-SF200 MM-PBU10 MM-PC100 MB-DB235 MN-CHC60 MM-CHC60 MB-PR010 MD-PM040 MW-PM040 MM-SPZ40 MD-PF375 MK-PIC01 MK-0040 MK-0039
45/65 53/55 34/65/149 34/53 34/53 34/53 34/53/55/65 34/53 34/53 84/106/127 130/143 130 84/106/127 74 88 84/106/127 100 72/122 72 87 142 131/136/137/143 66
Ratchet wrench 75mm Reamer Shoulders
MT-RI030 MT-CS450
48/53/55/63/65/149 134
S
Scanning abutment int. hex. connection, NP Scanning abutment int. hex. connection, SP Scanning abutment int. hex. connection, WP Screw driver for titanium ball cap 60mm Seven internal hex. Implant 6mm Seven internal hex. Implant 6mm Seven internal hex. Implant 6mm Seven internal hex. Implant 8mm Seven internal hex. Implant 8mm Seven internal hex. Implant 8mm Seven internal hex. Implant 8mm Seven internal hex. Implant 10mm Seven internal hex. Implant 10mm Seven internal hex. Implant 10mm Seven internal hex. Implant 10mm Seven internal hex. Implant 10mm Seven internal hex. Implant 11.50mm Seven internal hex. Implant 11.50mm Seven internal hex. Implant 11.50mm Seven internal hex. Implant 11.50mm Seven internal hex. Implant 11.50mm Seven internal hex. Implant 13mm Seven internal hex. Implant 13mm Seven internal hex. Implant 13mm Seven internal hex. Implant 13mm Seven internal hex. Implant 13mm Seven internal hex. Implant 16mm Seven internal hex. Implant 16mm Seven internal hex. Implant 16mm Seven internal hex. Implant 16mm Short cross driver for orthodontic screws Short direct hand and ratchet hex. key Short hex. drive 0.05 16mm Short insertion tool, int. hex. connection Short motor adapter for 0.05" hex. Short motor adapter for 0.05" hex. Short motor key adapter 0.05 22mm Short screwdriver for 0.05 hex. 22mm Sinus concave bajonet osteotome with stopper dia. 2mm Sinus concave bajonet osteotome with stopper dia. 3.25mm Sinus concave bajonet osteotome with stopper dia. 3mm Sinus concave bajonet osteotome with stopper dia. 4mm Sinus concave osteotome with stopper dia. 2mm Sinus concave osteotome with stopper dia. 3.25mm Sinus concave osteotome with stopper dia. 3mm
Cat. No.
Page
MN-SP001 MD-SP001 MW-SP001 MT-TSD10 MF7-06420 MF7-06500 MF7-06600 MF7-08375 MF7-08420 MF7-08500 MF7-08600 MF7-10330 MF7-10375 MF7-10420 MF7-10500 MF7-10600 MF7-11330 MF7-11375 MF7-11420 MF7-11500 MF7-11600 MF7-13330 MF7-13375 MF7-13420 MF7-13500 MF7-13600 MF7-16330 MF7-16375 MF7-16420 MF7-16500 MT-SCD20 MT-HMR05 MT-HDS30 MT-HSI10 MT-LM005 MT-SM005 MT-SMK13 MT-HHR07 MO-SLA20 MO-SLA32 MO-SLA30 MO-SLA40 MO-SLS20 MO-SLS32 MO-SLS30
72/78/79 94/95 72/118/119 84/106/127/132 10/12 13/14 13/15 10/11 10/12 13/14 13/15 8/9 10/11 10/12 13/14 13/15 8/9 10/11 10/12 13/14 13/15 8/9 10/11 10/12 13/14 13/15 8/9 10/11 10/12 13/14 29 46 46/67/133 8/10/13/16/18/45/53/55/63 46/53/55/81/97/121/132 46/53/55/81/97/121/132 67/131 67/133 50 50 50 50 50 50 50
180.
INDEX.
Alphabetic Order
T
Cat. No.
Page
Sinus concave osteotome with stopper dia. 4mm Sinus lift osteotomes set Soft plastic cap for metal housing 2.60mm Spade marking drill 27.50mm Square connection to ratchet adapter Standard abutment analog crown height 6mm, SP Standard cementing post 11.50mm Standard plastic cap for metal housing 2.6mm Surgical adapter driver 120mm Surgical kit for Seven impl. system with ext. irr. drill
MO-SLS40 MK-0023 MB-PPR10 MT-SMD10 MT-SRA10 MD-RSM60 MD-MAC10 MB-PPC10 MT-MSD20 MK-EI48
50 68 84/106/127 42/53/55/63/65 8/10/13/16/18/45/63 88 91/143 84/106/127 29/48/67/134 52/131
Technical hex. screw driver 142.5mm Temporary plastic abutment, NP Temporary plastic abutment, SP Temporary plastic abutment, WP The Organizer Kit Ti Base h. 4mm with hex int . hex. SP Ti Base h. 4mm without hex, int. hex., WP Ti base int. hex. connection for CAD/CAM, Narrow platform Ti base int. hex. connection for CAD/CAM, WP TI base kit h.4mm for int. hex. connection, NP TI base kit h.4mm for int. hex. connection, SP TI base kit h.4mm for int. hex. connection, WP Tissue punch 28mm Tissue punch dia. 4.20mm 29.50mm Titanium ball cap 3.1mm Titanium ball cap spring soft Titanium ball cap spring standard Titanium rider-ovoid 50mm Torque Ratchet kit Torque wrench 80mm Trephine bur 4mm 37mm Trephine bur 5mm 37mm Trephine bur 6mm 37mm Twist drill 2.80mm 37.50mm Twist drill 2.80mm external irrigation 37.50mm Twist drill 2.80mm external irrigation (red) Twist drill 3.20mm 37.60mm Twist drill 3.20mm external irrigation 37.60mm Twist drill 3.20mm external irrigation (blue) Twist drill 3.80mm 37.80mm Twist drill 3.80mm external irrigation 37.80mm Twist drill 3mm external irrigation (red)
MT-HTS10 MN-TPA10 MD-TPA10 MW-TPA10 MK-0012 MD-TB001 MW-TB002 MN-TB001 MW-TB001 MK-TBN4 MK-TBS4 MK-TBW4 MT-TP500 MT-TP420 MB-TTP10 MB-TBS20 MB-TBS10 MM-TRU10 MT-RI050 MT-RI040 MT-00400 MT-00500 MT-00600 MT-TD280 MT-TDN28 MT-TDT28 MT-TD320 MT-TDN32 MT-TDT32 MT-TD380 MT-TDN38 MT-TDT30
134 77 91 115 50 94 119 78 118 78 72/94 72/118 46 48 84/106/127 84/106/127 84/106/127 130/143 49 48/67 43 43 43 40 36/50/55/56 35/53 40 36/50/55/56 35/53 40 36/50/55/56 65
U W
Cat. No.
Page
Twist drill 4.50mm 38.20mm Twist drill 4.50mm external irrigation (white) Twist drill 4mm external irrigation (green) Twist drill 5.50mm 38.20mm Twist drill 5.50mm external irrigation 38.20mm Twist drill 5mm 38.20mm Twist drill 5mm external irrigation 38.20mm Twist drill 5mm external irrigation 38.20mm Twist drill 5mm external irrigation (white) Twist short drill 2.80mm Twist short drill 3.20mm Twist short drill 3.80mm Twist short drill 4.50mm Twist short drill 4mm Twist short drill 5.50mm Twist short drill 5mm
MT-TD450 MT-TDT45 MT-TDT40 MT-TD550 MT-TDN55 MT-TD500 MT-TDN45 MT-TDN50 MT-TDT50 MT-TDI28 MT-TDI32 MT-TDI38 MT-TDI45 MT-TDI40 MT-TDI55 MT-TDI50
41 35/53 35/53 41 37/50/55/56 41 37/50/55/56 37/50/55/56 35/53 38 38 38 39 39 39 39
UNO implant surgical kit UNO One Piece implant 10mm UNO One Piece implant 11.50mm UNO One Piece implant 11.50mm UNO One Piece implant 13mm UNO One Piece implant 13mm UNO One Piece implant 16mm UNO One Piece implant 16mm UNO One Piece implant analog 18mm UNO One Piece implant comfort plastic cap 12.40mm UNO One Piece implant dia. 3 L 10mm UNO One Piece implant insertion tool 20mm UNO One Piece implant long key 17mm UNO One Piece implant motor adapter, long 30mm UNO One Piece implant motor adapter, short 22mm UNO One Piece implant short key 12mm
MK-0036 MO1-10350 MO1-11300 MO1-11350 MO1-13300 MO1-13350 MO1-16300 MO1-16350 MO1-RSA10 MM-OUP01 MO1-10300 MT-HKO21 MT-HKL21 MT-UML21 MT-UMS21 MT-HKS15
64/65 25/27 25/26 25/27 25/26 25/27 25/26 25/27 28 28 25/26 25/44/65 25/44/65 44/65 44 25/44
Wide abutment analog crown height 6mm, WP Wide anatomic 1mm transgingival abutment, h. 6mm Wide ball attachment anchor internal hex. 1mm 1mm Wide ball attachment anchor internal hex. 3mm 3mm Wide ball attachment anchor internal hex. 5mm 5mm Wide cementing post for WP 13mm Wide cementing post, SP 11.50mm
MW-RSM60 MW-CPK61 MW-B1500 MW-B3500 MW-B5500 MW-WMAC1 MD-WMAC1
112 112 126 126 126 115 91
182.
INDEX.
Alphabetic Order
Size
Y Z
Cat. No.
Page
Wide dia. 15 degree angulated abutment internal hex. 11mm Wide dia. implant analog internal hex. 12mm Wide dia. plastic cylinder with hex. internal hex. 13mm Wide dia. plastic cylinder without hex. internal hex. 13mm Wide direct temporary plastic cylinder internal hex. 14mm Wide esthetic 15 angulated abutment internal hex. 1mm 11mm Wide esthetic abutment internal hex. 1mm 11mm Wide gold plastic cylinder with hex. internal hex. 18.20mm Wide int. hex. Implant analog for universal hand driver Wide plastic healing cap h. 6mm, WP Wide platform cementing post 11.50mm Wide platform multi-unit abutment 1mm 1mm / 30-35 Wide platform multi-unit abutment 2mm 2mm / 30-35 Wide platform multi-unit abutment 3mm 3mm / 30-35 Wide platform multi-unit abutment 4mm 4mm / 30-35 Wide profile direct plastic cylinder with hex. 12mm Wide profile direct plastic cylinder without hex. 11mm
MW-AN151 MW-RSM10 MW-CPH13 MW-CP013 MW-TPH50 MW-P1510 MW-P0010 MW-GPC10 MT-UW002 MW-CHC60 MW-MAC10 MA-W1500 MA-W2500 MA-W3500 MA-W4500 MD-CPH50 MD-CP050
116 72/111/118/119 114 114 114 116 116 114 67/134 112 115 124 124 124 124 90 90
Yeung Bone Harvest kit
MK-BH26
57
Zircon Diamond Burr Set Zirconia cemented incisor 15deg. abutment set int. hex., NP Zirconia cemented incisor 15deg. abutment set int. hex., SP Zirconia cemented premolar. abutment set int. hex., SP Zirconia cemented premolar. abutment set int. hex., WP Zirconia incisor 15deg. abutment set int. hex., NP Zirconia incisor 15deg. abutment set int. hex., SP
MK-DB01 MK-NIC6 MK-SIC6 MK-SPC4 MK-WPC4 MK-NIZ6 MK-SIZ6
135 82/83 98/99 100/101 122/123 82/83 98/99
INDEX.
Numeric Order
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
4B-X1010
152
MB-NZL03
85
MD-CP050
90
4B-X1025
152
MB-NZL04
85
MD-CPH13
90/143
4B-X2505
152
MB-NZL05
85
MD-CPH50
90
4B-X2510
152
MB-NZL06
85
MD-CPK42
143
4B-X2525
152
MB-PPC10
84/106/127
MD-CPK61
88
4B-X2540
152
MB-PPR10
84/106/127
MD-CPK81-1 137
BS-4BS01
150
MB-PR010
84/106/127
MD-CPK82-2 137
ET-IT001
81/97/121
MB-RS375
84/105/126
MD-CPK83-3 137
GI-SCH11
78/79/94/95
MB-SF200
84/106/127
MD-CPK84-4 137
GI-WCH11
118/119
MB-SZL00
108
MD-CTP10
MA-ANH17
103/143
MB-SZL01
108
MD-CTP10-5 137
MA-ANH30
103/143
MB-SZL02
108
MD-G0213
87/111
MA-RSM10
102/124
MB-SZL03
108
MD-G0220
90/92/114/116
MA-S1375
103/143
MB-SZL04
108
MD-GP010
90
MA-S2375
103/143
MB-SZL05
108
MD-GP100
87/111
MA-S3375
103/143
MB-SZL06
108
MD-GPC10
90
MA-S4375
103/143
MB-TBS10
84/106/127
MD-GT190
137
MA-W1500
124
MB-TBS20
84/106/127
MD-I0375
87
MA-W2500
124
MB-TTP10
84/106/127
MD-IC040
88
MA-W3500
124
MB-WZL00
128
MD-IC800
88
MA-W4500
124
MB-WZL01
128
MD-ICH40
88
MB-AN152
105/143
MB-WZL02
128
MD-IT100
87
MB-AN252
105
MB-WZL03
128
MD-IT300
87
MB-DB235
84/106/106/127
MB-WZL04
128
MD-MAC10
91/143
MB-DMH10
84/106/127
MB-WZL05
128
MD-MAC10-6 137
MB-GPS10
84/106/127
MB-WZL06
128
MD-MACF1
91
MB-N1375
105
MD-A0010
91/143
MD-P0030
91
MB-N2330
84
MD-A0010-8 137
MB-N2375
105/143
MD-A1510
MB-N3330
84
MD-A1510-11 137
MB-N3375
105
MD-A2510
MB-N4330
84
MD-A2510-12 137
MB-N4375
105
MD-AN151
MB-N5375
105
MD-AN151-9 137
MB-NZL00
85
MD-AN251
MB-NZL01
85
MD-AN251-10 137
MB-NZL02
85
MD-CP013
92/143 92 92 92 90/143
91
MD-P0030-7 137 MD-P1530
92
MD-P1530-13 137 MD-P2530
92
MD-P2530-14 137 MD-PF375
87
MD-PM040
100
MD-RSM10
72/87/94/95
MD-RSM60
88
MD-S0200
90/92/114/116
184.
INDEX.
Alphabetic Order
Cat. No.
Page
MD-MAC10-6 137
Cat. No.
Page
Cat. No.
Page
MF4-11375
18/19
MF7-16420
10/12
MD-MACF1
91
MF4-11420
18/20
MF7-16500
13/14
MD-P0030
91
MF4-11500
21/22
MG2-06160
29
MF4-11600
21/23
MG2-08160
29
MF4-13330
16/17
MG2-10160
29
MF4-13375
18/19
MG2-12160
29
MF4-13420
18/20
MG-BM047
147
MD-P0030-7 137 MD-P1530
92
MD-P1530-13 137 MD-P2530
92
MD-P2530-14 137
MF4-13500
21/22
MG-BM055
147
MD-PF375
87
MF4-13600
21/23
MG-D0624
147
MD-PM040
100
MF4-16330
16/17
MG-D0633
147
MD-RSM10
72/87/94/95
MF4-16375
18/19
MG-D0637
147
MD-RSM60
88
MF4-16420
18/20
MG-D0642
147
MD-S0200
90/92/114/116
MF4-16500
21/22
MG-D0650
147
MD-S0220
50/72/90/92
MF7-06420
10/12
MG-D0824
147
MD-S0222
90/92/114/116
MF7-06500
13/14
MG-D0833
147
MD-S0224
90/92/114/116
MF7-06600
13/15
MG-D0837
147
MD-SP001
94/95
MF7-08375
10/11
MG-D0842
147
MD-TB001
94
MF7-08420
10/12
MG-D0850
147
MD-TB002
95
MF7-08500
13/14
MG-D1024
147
MD-TCH13
90
MF7-08600
13/15
MG-D1033
147
MD-TPA10
91
MF7-10330
8/9
MG-D1037
147
MD-TPA12
90
MF7-10375
10/11
MG-D1042
147
MD-TPH50
90
MF7-10420
10/12
MG-D1050
147
MD-WMAC1 91
MF7-10500
13/14
MG-D1124
147
MF4-06420
18/20
MF7-10600
13/15
MG-D1133
147
MF4-06500
21/22
MF7-11330
8/9
MG-D1142
147
MF4-06600
21/23
MF7-11375
10/11
MG-D1150
147
MF4-08375
18/19
MF7-11420
10/12
MG-D1324
147
MF4-08420
18/20
MF7-11500
13/14
MG-D1333
147
MF4-08500
21/22
MF7-11600
13/15
MG-D1342
147
MF4-08600
21/23
MF7-13330
8/9
MG-D1350
147
MF4-10330
16/17
MF7-13375
10/11
MG-DLG55
147
MF4-10375
18/19
MF7-13420
10/12
MD-S0220
90/92/114/116
MF4-10420
18/20
MF7-13500
13/14
MD-S0222
90/92/114/116
MF4-10500
21/22
MF7-13600
13/15
MD-S0224
90/92/114/116
MF4-10600
21/23
MF7-16330
8/9
MD-SP001
94/95
MF4-11330
16/17
MF7-16375
10/11
MD-TB001
94
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
MD-TB002
95
MF7-08500
13/14
MG-D1024
147
MD-TCH13
90
MF7-08600
13/15
MG-D1033
147
MD-TPA10
91
MF7-10330
8/9
MG-D1037
147
MD-TPA12
90
MF7-10375
10/11
MG-D1042
147
MD-TPH50
90
MF7-10420
10/12
MG-D1050
147
MD-WMAC1 91
MF7-10500
13/14
MG-D1124
147
MF4-06420
18/20
MF7-10600
13/15
MG-D1133
147
MF4-06500
21/22
MF7-11330
8/9
MG-D1142
147
MF4-06600
21/23
MF7-11375
10/11
MG-D1150
147
MF4-08375
18/19
MF7-11420
10/12
MG-D1324
147
MF4-08420
18/20
MF7-11500
13/14
MG-D1333
147
MF4-08500
21/22
MF7-11600
13/15
MG-D1342
147
MF4-08600
21/23
MF7-13330
8/9
MG-D1350
147
MF4-10330
16/17
MF7-13375
10/11
MG-DLG55
147
MF4-10375
18/19
MF7-13420
10/12
MG-FP020
149
MF4-10420
18/20
MF7-13500
13/14
MG-GMI10
149
MF4-10500
21/22
MF7-13600
13/15
MG-GRI01
149
MF4-10600
21/23
MF7-16330
8/9
MG-GRI10
149
MF4-11330
16/17
MF7-16375
10/11
MG-GRN01
149
MF4-11375
18/19
MF7-16420
10/12
MG-IE160
149
MF4-11420
18/20
MF7-16500
13/14
MG-IE172
149
MF4-11500
21/22
MG2-06160
29
MG-K001
144
MF4-11600
21/23
MG2-08160
29
MG-TP047
147
MF4-13330
16/17
MG2-10160
29
MG-TP055
147
MF4-13375
18/19
MG2-12160
29
MH-00450
103/125
MF4-13420
18/20
MG-BM047
147
MK-0001
141/143
MF4-13500
21/22
MG-BM055
147
MK-0011
60
MF4-13600
21/23
MG-D0624
147
MK-0012
50
MF4-16330
16/17
MG-D0633
147
MK-0014
56
MF4-16375
18/19
MG-D0637
147
MK-0016
54
MF4-16420
18/20
MG-D0642
147
MK-0020
62/63
MF4-16500
21/22
MG-D0650
147
MK-0022
140
MF7-06420
10/12
MG-D0824
147
MK-BH26
57
MF7-06500
13/14
MG-D0833
147
MK-BS001
58
MF7-06600
13/15
MG-D0837
147
MK-CPK41
89
MF7-08375
10/11
MG-D0842
147
MK-CPK42
89/143
MF7-08420
10/12
MG-D0850
147
MK-CPK43
89
186.
INDEX.
Alphabetic Order
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
MG-FP020
149
MK-DB01
135
MK-WOE1
120
MG-GMI10
149
MK-EI48
52/131
MK-WOE3
120
MG-GRI01
149
MK-MUS4
95
MK-WOE5
120
MG-GRI10
149
MK-MUW4
119
MK-WPC4
122/123
MG-GRN01
149
MK-NIC6
82/83
MK-WPK41
113
MG-IE160
149
MK-NIZ6
82/83
MK-WPK42
113
MG-IE172
149
MK-NOE1
80
MK-WPK43
113
MG-K001
144
MK-NOE2
80
MK-WPK44
113
MG-TP047
147
MK-NOE3
80
MK-WPK61
112/113
MG-TP055
147
MK-NOE4
80
MK-WPK62
113
MH-00450
103/125
MK-NOE5
80
MK-WPK63
113
MK-0001
141/143
MK-NPK41
75
MK-WPK64
113
MK-0011
60
MK-NPK42
75
MK-WPK81
113
MK-0012
50
MK-NPK43
75
MK-WPK82
113
MK-0014
56
MK-NPK44
75
MK-WPK83
113
MK-0016
54
MK-NPK61
74/75
MK-WPK84
113
MK-0020
62/63
MK-NPK62
75
MK-WPZ4
122/123
MK-0022
140
MK-NPK63
75
MM-BGC45
103/125
MK-0023
68
MK-NPK64
75
MM-CHC60
88
MK-0024
69
MK-PIC01
142
MM-CP045
103/125/143
MK-0036
64/65
MK-SDS06
59
MM-G0330
103/125
MK-0039
66
MK-SDS08
59
MM-GB100
130
MK-0040
131/136/137/143
MK-SDS10
59
MM-GBU10
130
MK-BH26
57
MK-SDS11
59
MM-GRU10
130
MK-BS001
58
MK-SDS13
59
MM-IO450
102/124
MK-CPK41
89
MK-SIC6
98/99
MM-IT450
102/124
MK-CPK42
89/143
MK-SIZ6
98/99
MM-LBP10
86/109/129
MK-CPK43
89
MK-SOE1
96
MM-LCT10
67/85/108
MK-CPK44
89
MK-SOE2
96
MM-LEL10
86/109/129
MK-CPK61
88/89
MK-SOE3
96
MM-LELE1
86/109
MK-CPK62
89
MK-SOE4
96
MM-LER10
86/109/129
MK-CPK63
89
MK-SOE5
96
MM-LFA40
85/86/108/109
MK-CPK64
89
MK-SPC4
100/101
MK-0023
68
MK-CPK81
89
MK-SPZ4
100/101
MK-0024
69
MK-CPK82
89
MK-TBN4
78
MK-0036
64/65
MK-CPK83
89
MK-TBS4
72/94
MK-0039
66
MK-CPK84
89
MK-TBW4
72/118
MK-0040
131/136/137/143
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
MK-CPK44
89
MK-SOE2
96
MM-LEL10
86/109/129
MK-CPK61
88/89
MK-SOE3
96
MM-LELE1
86/109/129
MK-CPK62
89
MK-SOE4
96
MM-LER10
86/109/129
MK-CPK63
89
MK-SOE5
96
MM-LFA40
85/86/108/109
MK-CPK64
89
MK-SPC4
100/101
MM-LFA50
128
MK-CPK81
89
MK-SPZ4
100/101
MM-LIC10
85/108/128
MK-CPK82
89
MK-TBN4
78
MM-LLR10
86/109/129
MK-CPK83
89
MK-TBS4
72/94
MM-LMP02
85/108/128
MK-CPK84
89
MK-TBW4
72/118
MM-LPP10
86/109/129
MK-DB01
135
MK-WOE1
120
MM-LRM10
86/109/129
MK-EI48
52/131
MK-WOE3
120
MM-LSD15
67/86/109/129
MK-MUS4
95
MK-WOE5
120
MM-LSD21
67/86/109/129
MK-MUW4
119
MK-WPC4
122/123
MM-MG450
103/125
MK-NIC6
82/83
MK-WPK41
113
MM-OUP01
28
MK-NIZ6
82/83
MK-WPK42
113
MM-PBU10
130/143
MK-NOE1
80
MK-WPK43
113
MM-PC100
130
MK-NOE2
80
MK-WPK44
113
MM-S0330
103/125
MK-NOE3
80
MK-WPK61
112/113
MM-SPZ40
72
MK-NOE4
80
MK-WPK62
113
MM-T0450
103/124
MK-NOE5
80
MK-WPK63
113
MM-TC100
130
MK-NPK41
75
MK-WPK64
113
MM-TRU10
130/143
MK-NPK42
75
MK-WPK81
113
MN-AN020
77
MK-NPK43
75
MK-WPK82
113
MN-CHC60
74
MK-NPK44
75
MK-WPK83
113
MN-CP013
76
MK-NPK61
74/75
MK-WPK84
113
MN-CPH13
76
MK-NPK62
75
MK-WPZ4
122/123
MN-CPK61
74
MK-NPK63
75
MM-BGC45
103/125
MN-G0160
73
MK-NPK64
75
MM-CHC60
88
MN-GP010
76
MK-PIC01
142
MM-CP045
103/125/143
MN-GP100
73
MK-SDS06
59
MM-G0330
103/125
MN-GPC10
76
MK-SDS08
59
MM-GB100
130
MN-I0330
73
MK-SDS10
59
MM-GBU10
130
MN-IC040
74
MK-SDS11
59
MM-GRU10
130
MN-IC600
74
MK-SDS13
59
MM-IO450
102/124
MN-ICH40
74
MK-SIC6
98/99
MM-IT450
102/124
MN-IT100
73
MK-SIZ6
98/99
MM-LBP10
86/109/129
MN-IT300
73
MK-SOE1
96
MM-LCT10
67/85/108
MN-MAC10
77
188. 188.
INDEX.
Alphabetic Order
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
MN-PF330
73
MO-SLS40
50
MT-HDS30
46/67/133
MN-RSM10
72/73/78/79
MO-SO300
63
MT-HHR07
67/133
MN-RSM60
74
MO-SO350
63
MT-HHR13
67/133/149
MN-S0160
72/76/77/78
MO-SO400
63
MT-HKL21
25/44/44/65
MN-SP001
72/78/79
MT-00400
43
MT-HKO21
25/44/65
MN-TB001
78
MT-00500
43
MT-HKS15
25/44
MN-TB002
79
MT-00600
43
MT-HLI10
8/10/13/16/18/45
MN-TPA10
77
MT-A4022
135
MT-HMR05
46
MN-TPA12
76
MT-AL005
132
MT-HMR10
46/53
MO1-10300
25/26
MT-B4018
135
MT-HSI10
8/10/13/16/18/45
MO1-10350
25/27
MT-BC280
57
MT-HTS10
134
MO1-11300
25/26
MT-BC320
57
MT-HW001
45
MO1-11350
25/27
MT-BC380
57
MT-IE160
133
MO1-13300
25/26
MT-BC450
57
MT-IE172
67/133
MO1-13350
25/27
MT-BK235
67/143
MT-IT100
67/132
MO1-16300
25/26
MT-BTI10
48
MT-K2023
135
MO1-16350
25/27
MT-BTT20
65
MT-LCD20
29
MO1-RSA10 28
MT-BTT24
53/65
MT-LM005
46/53/132
MO-CBS20
50
MT-BTT28
53
MT-LMK13
67/131
MO-CBS30
50
MT-BTT30
65
MT-MAL10
48
MO-CBS32
50
MT-BTT32
53
MT-MRH10
45
MO-CBS40
50
MT-BTT40
53
MT-MRH20
45
MO-CO160
50/63
MT-BTT45
53
MT-MRH25
55
MO-CO200
63
MT-BTT50
53
MT-MSD20
29/48/48/67/134
MO-CO240
63
MT-C3125
135
MT-MUK02
67/102/125
MO-CO280
63
MT-CRD20
43
MT-NB225
72/84/105/126/132
MO-CS200
50
MT-CRD21
43
MT-NRH20
8/16/45/53
MO-CS300
50
MT-CRD28
43
MT-P2406
34/53
MO-CS325
50
MT-CS450
134
MT-P2408
34/53
MO-CS400
50
MT-CSN33
42/50/55/56
MT-P2410
34/53
MO-SLA20
50
MT-DE001
45/53/55
MT-P2411
34/53
MO-SLA30
50
MT-DI001
46/53/67
MT-P2413
34/53
MO-SLA32
50
MT-F2121
135
MT-P2416
34/53/55/65
MO-SLA40
50
MT-GDM01
131/134
MT-PP001
45/65
MO-SLS20
50
MT-GDN33
42/50/53/55/56
MT-PP240
53/55
MO-SLS30
50
MT-GDN50
32/42/50/53/55/56
MT-RI030
48/53/55/63
MO-SLS32
50
MT-HDL30
46/67/133
MT-RI040
48/67
Cat. No.
Page
Cat. No.
Page
Cat. No.
Page
MT-RI050
49
MT-TP500
46
MW-P1510-22 137
MT-SCD20
29
MT-TSD10
84/106/127/132
MW-PF550
111 72/122
MT-SHA10
8/10/13/16/18/45
MT-UML21
44/65
MW-PM040
MT-SM005
46/53/55/132
MT-UMS21
44
MW-RSM10
72/111/118/119
MT-SMD10
42/53/55/63/65
MT-UN002
134
MW-RSM60
112
MT-SMK13
67/131
MT-US002
67/134
MW-SP001
72/118/119
MT-SRA10
8/10/13/16/32/45
MT-UW002
67/134
MW-TB001
118
116
MW-TB002
119
MT-TD110
42
MW-AN151
MT-TD280
40
MW-AN151-21 137/143
MW-TPA10
115
MT-TD320
40
MW-B1500
126
MW-TPA12
114
MT-TD380
40
MW-B3500
126
MW-TPH50
114
MT-TD450
41
MW-B5500
126
MW-WMAC1 115
MT-TD500
41
MW-CHC60
112
OE-IC001
81/97/121
MT-TD550
41
MW-CP013
114
OE-IC002
81/97/121
OE-RSM60
81/97/121
MT-TDI28
38
MW-CP060
114
MT-TDI32
38
MW-CPH13
114
MT-TDI38
38
MW-CPH60
114
MT-TDI40
39
MW-CPK61
112
MT-TDI45
39
MW-CPK81-15 137
MT-TDI50
39
MW-CPK82-16 137
MT-TDI55
39
MW-CPK83-17 137
MT-TDN19
42/53/55
MW-CPK84-18 137
MT-TDN20
34/65/149
MW-CTP10
MT-TDN28
36/50/55/56
MW-CTP10-19 137
MT-TDN32
36/50/55/56
MW-GP010
114
MT-TDN38
36/50/55/56
MW-GPC10
114
MT-TDN45
37/50/55/56
MWH-M013/2 138
MT-TDN50
37/50/55/56
MW-I0470
111
MT-TDN55
37/50/55/56
MW-IC040
112
MT-TDO01
29
MW-IC800
112
MT-TDT28
35/53
MW-ICH40
112
MT-TDT30
65
MW-IT100
111
MT-TDT32
35/53
MW-IT300
110/111
MT-TDT40
35/53
MW-MAC10
115
MT-TDT45
35/53
MW-MAC10-20 137
MT-TDT50
35/53
MW-P0010
116
MT-TP420
48
MW-P1510
116
115
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.