RAPID DEPLOY SHELTER
SCOPEÂŽ RAPID DEPLOY SHELTER WARNING: Take care when removing shelter from carry bag SET-UP 1. Take shelter out of carry bag 2. Undo the elastic strap and the shelter will self-erect. Take care to allow plenty of space and hold away from your body 3. Locate the two tension poles into the metal eyelets at the top of the shelter 4. Place over your bedchair and attach the
internal speed clips to the head and foot sections of your bedchair frame 5. Pull shelter fully down over bedchair so skirt touches the floor 6. Position two rear then two front pegs 7. Position all remaining pegs so the shelter is under complete tension
1
2
3
4
5
6
7
1
2
4
6
3
5
7
8
PACK AWAY 1. Remove pegs 2. Detach internal clips at the head and foot section of the bedchair 3. Remove the external tension poles 4. Remove from over bedchair and place shelter upside down 5. Stand facing the shelter, with your left hand twist the shelter frame anti-clockwise away from you into the centre creating a figure of eight shape
6. Fold the shelter in half to produce an oval shape 7. Grip the middle of the far side bars and pull them towards you with your left hand whilst your right hand twists the shelter in a figure of eight motion away from you 8. The shelter should now be folded in half again and is ready to be secured with the elastic retention strap Visit www.nashtackle.co.uk for a video clip demonstration of the Rapid Deploy Shelter.
Note: Failing to follow these instructions carefully can result in damage to the self-erecting frame of the Rapid Deploy Shelter and could invalidate its statutory 12 month warranty.
Kevin Nash Group PLC P.O. Box 2061 | Rayleigh | Essex | SS6 9WQ T: +44 (0)1702 233232 F: +44 (0)1702 233234 www.nashtackle.co.uk