1 minute read
CONTACT CLEANER P
CONTACT CLEANER
Advertisement
PROPERTIES
Electrical contact cleaner with 3 main purposes: degreasing, oxidation removal and protection.
BENEFITS
Particularly effective for cleaning electrical or electronic equipment. Removes oxidation and sulphation from electrical contacts. Re-establishes dielectric constants and eliminates false contacts. Dissolves and removes stubborn deposits such as grease, oil, dust and dirt. Chlorinated solvent-free. Does not trap dust, non-oily. Disperses moisture, prevents oxidation. Removes copper oxide. Non-harmful to protective lacquer. Dries very rapidly, leaving surfaces clean and dry. Supplied with a capillary action tube for accessing specific or difficult-toaccess areas.
AVAILABLE AS
Packaging Part No. Catalogue
Box of 12 x 500 ml aerosol cans with cobra-style head 74 24 041 848
USE
Spray at a distance of 20 cm from the parts to be treated. Leave to act for 30 to 60 seconds. Wipe with a dry, clean cloth. Never work with the power supply connected. Precaution: Do not use NCE 3 on live equipment or near a heat source or sparks. Ensure that there is sufficient ventilation.
TECHNICAL DATA
Specifications Values
Colour Colourless
Self-ignition point 200°C
RECOMMENDATIONS
It is essential to read the Safety Datasheet before use: quickfds.com
AIR CIRCUIT CARBON DEPOSIT REMOVER
Comprehensive cleaner/carbon deposit remover for the air circuit
PROPERTIES
Air circuit carbon deposit remover cleans the air hoses between the compressor and the APM (Air Product Management) and prevents air leaks from the silencer. Eliminates oil residues and carbon deposits from inside the hoses.
BENEFITS
Reduces air leaks from the silencer and safety valve.
Removes water, oil and carbon deposits.
Clears reprogramming errors.
Limits the formation of deposits.
AVAILABLE AS
Packaging Part No. Catalogue
Box of 6 x 1 L containers 74 24 047 853
RECOMMENDATIONS
It is essential to read the Safety Datasheet before use: quickfds.com
USE
No need to remove the hoses: Fill the hoses with cleaning product Leave to act for 2 hours Rinse out with hot water Use compressed air to dry the hoses
Soaking: Remove the air hoses Fill the hoses with cleaning product Leave to act for 2 hours Rinse out with hot water Use compressed air to dry the hoses Refit the air hoses
