2016 Functional Spec Catalog by Old Town Woodworks and Custom Cabinets

Technovation

â&#x201E;¢

Functional Hardware

www.hardwareresources.com

Technovation »»

“One Stop Shop” for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more

»»

Third Party Testing to meet or exceed all ANSI/BHMA standards

»»

Many products certified by the KCMA and Woodwork Institute

»»

6 Regional warehouses across the US ensure item availability and quick shipping/transit times

»»

Hardware Resources is a member of the following trade organizations:

™

HINGES: »» »»

Large selection to meet just about every application: Face Frame/Frameless, Compact/European, Soft Close/ Non-soft Close Decorative hinges and shutter hinges in industry standard finishes to compliment any installation

500 Series - 90˚, 110˚ and 125˚ European Concealed Hinges 700 Series - 90˚, 110˚ and 125˚ Soft Close European Concealed Hinges 900 Series - 110˚ and 125˚ Heavy Duty European Concealed Hinges

800.463.0660

SLIDES:

»» »»

Large selection to meet just about every application: Face Frame/Frameless, Epoxy/Side Mount/ Undermount, Light Duty to Extra Heavy Duty, 3/4 Extension/Full Extension Best-selling series:

303FUSFT Series - Soft Close Full Extension Ball Bearing Drawer Slides 303FUPT Series - Push to Open Full Extension Ball Bearing Drawer Slides 303FU Series - Heavy Duty Full Extension Ball Bearing Drawer Slides USE Series - Full Extension Soft Close Undermount Drawer Slides

Technovation

™

Table of Contents Introduction

Testing and Certifications Quick Reference Guide Specifications

Cabinet Hinges

www.hardwareresources.com

900 Series: Heavy Duty European Concealed Hinges 110° Hinges 125° Hinges 700 Series: Soft Close European Concealed Hinges 90° Hinges 110° Hinges 125° Hinges 500 Series: European Concealed Hinges 90° Hinges 110° Hinges 110° Free-Swinging Hinges 125° Hinges Specialty Hinges: 165° Hinges 170° Hinges 45° Corner Overlay Hinge 90° Blind Corner Hinge 105° Pie Corner Hinge 130° Pie-Cut Corner Hinge Drawer Slides

800.463.0660

Undermount Slides: USE58 Premium Series: 100 lbs. Soft Close Slides USE34 Premium Series: 100 lbs. Soft Close Slides USE Series: 100 lbs. Soft Close Slides Ball Bearing Slides: 209FU Series: 225 lbs. 300FU Series: 150 lbs. 301FU Series: 100 lbs. 303FU Series: 100 lbs. 303FUSFT Series: 100 lbs. Soft Close 303FUP Series: 100 lbs. 307FU Series: 75 lbs.

Technovation

™

Testing and Certifications

800.463.0660

www.hardwareresources.com

Hardware Resources is committed to providing the highest quality products to our customers, products that give a lifetime of consistent and reliable performance. Part of that commitment requires extensive field testing with our products in the hands of real customers using them in the most challenging real world applications. The other part of fulfilling that commitment is ensuring that our products meet the required standards set forth by national institutions, such as ANSI and the Woodwork Institute. In order to meet these standards, we ensure our products go through extensive 3rd party testing. We believe in delivering a quality product so much that we routinely have our products tested above and beyond industry standards. Throughout our catalog you will see reference to various certifications including ANSI/BHMA and the Woodwork Institute (WI). These are some of the most common ratings and their meanings: For our concealed hinges:

ANSI/BHMA Hinge Grade Grade 1 Grade 2 Grade 3

Permanent Cycle Test Door Weight Set Test Load Rating 40 +/- .5 lbs 160 lbf 100, 000 cycles 12 +/- .5 lbs 75 lbf 50,000 cycles 6 +/- .5 lbs 75 lbf 25,000 cycles

For our drawer slides:

ANSI/BHMA Slide Grade Grade 1 Grade 2 Grade 3 1HD-100

Static Load Weight 75 lbs 50 lbs 50 lbs 100 lbs

Cycle Test Rating 50,000 35,000 25,000 50,000

sample hinge certification

Woodwork Institute certification and what it means: As a service to members of the Woodwork Institute and the architectural millwork industry in general, the WI certifies and acknowledges products that have been reviewed and confirmed to meet the WIâ&#x20AC;&#x2122;s minimum requirements. These product requirements are established by the Architectural Woodwork Standards and can be found online at http://woodworkinstitute.com.

Technovation

â&#x201E;˘

Quick Reference Drawer Slides A - Quick reference symbols to help you find what you need at-a-glance when browsing the booklet. B - Shows the item numbers and a brief description for each item.

C B

D - To find the measurements for the Cabinet member mounting holes.

Cabinet Hinges A - Quick reference symbols to help you find what you need at-a-glance when browsing the booklet.

D A B

B - Lists each item number with its description for a specific opening angle in a particular series of hinges. C - Diagrams to assist you in making quick adjustments to your cabinet doors.

E F

D - Shows this series of hinge mounted into a frameless cabinet. E - Shows this series of hinge mounted into a face frame cabinet.

800.463.0660

F - To find your overlay and reveal tables. How to look up the boring distance and mounting plate height Find your overlay in mm. The number furthest to the left in that row is your plate height in mm. The number at the bottom of the column determines your boring distance (tab) needed. How to find the minimum reveal The bottom column in the reveal table shows the boring distance (tab). Based on your current tab, look up at the column to find your minimum reveal and follow the row all the way to the left of the table to see the needed plate height.

www.hardwareresources.com

C - To find the measurements for the Drawer member mounting holes.

S P

Technovation

â&#x201E;˘

USE58 -100 Series

Full Extension

Premium Undermount Slides

USE58-100-15 381 (15") drawer 391 (15-3/8") 224 (8-13/16")

USE58-100-12 96drawer (3-3/4") 305 (12") 9 (11/32")

314 (12-3/8") 224 (8-13/16")

Travel

9 (11/32")



USE58-100-18 457 (18") drawer 224 (8-13/16")

USE58-100-21 533 (21") drawer

224 (8-13/16")

391 (15-3/8") 224 (8-13/16")

Description

USE58-100-12

12” Full Extension Slide

USE58-100-15

15” Full Extension Slide

USE58-100-21

800.463.0660

FRONT HOLE PATTERN 17.5 (11/16") 30 (1-3/16")

96 (3-3/4") 9 (11/32")

Part Number

543 (21-3/8") USE58-100-18 USE58-100-18 457 (18") drawer

256 (10-1/16")

18” Full Extension Slide 467 (18-3/8")

21” Full Extension Slide 192 (7 -9/16")

224 (8-13/16")

33 (1-5/16")

6 (1/4")

224 (8-13/16") 36.5 (1-7/16") 24.5 (31/32")

REAR NOTCH DIMENSIONS 17.5 (11/16")

256 (10-1/16")

100lb

Zinc Lengths

32mm

12” - 21”

Packaging

Certification

REAR VIEW OF THE DRAWER NOTCH

33 (1-5/16") 7x9 7 (9/32")

9 (11/32")

30 (1-3/16") 7 (9/32")

Finish





543 (21-3/8")

7 (9/32")

Load Rating

Hole Pattern

9 (11/32")

USE58-100-21 533 (21") drawer

Full

Clips sold separately.



USE58-100-15 467 (18-3/8") 381 (15") drawer 192 (7 -9/16")



www.hardwareresources.com

The NEW Premium Undermount Soft Close Drawer Slides are dependable, durable, long-lasting, smooth, easy-to-install and most of all, worryfree. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face USE58-100-12 frame and frameless, as well as inset and overlay 305 (12") drawer applications. Our new USE58 Premium 314 (12-3/8") 224 (8-13/16") Undermount Slides will accommodate 9 (11/32") 1/2” & 5/8” drawer box material. Available in standard 12”, 15”, 18”, and 21” lengths.

6 (1/4") 11 (7/16")

36.5 (1-7/16")

12.70 (1/2")

24.5 (31/32")

MINIMUM 32 (1-1/4")

Technovation

™

 10 pr/ box

Grade 1

USE58 -100 Series

Full Extension

Premium Undermount Slides Construction & Assembly Specifications

USE58-100-15 381 (15") drawer USE58-100-15 381 (15") drawer USE58-100-15 381 (15") drawer USE58-100-15 381 (15") drawer

314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16")

391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16")

USE58-100-18 457 (18") drawer USE58-100-18 457 (18") drawer 224 (8-13/16") USE58-100-18 457 (18") drawer USE58-100-18 224 (8-13/16") 457 (18") drawer 224 (8-13/16")

224 (8-13/16")

9 (11/32")

Slide Length

Total Cabinet Depth

9 (11/32")

Min Inside Cabinet Depth

Min Inside Max Inside Cabinet Cabinet Depth Depth

USE58-100-12 - (12”) drawer

9 (11/32")

96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32")

Overall Drawer Length

FACE FRAME

12-3/8” 314mm

15” 381mm

12” 305mm

12-5/8” 321mm

12-7/8” 326mm

14” 356mm

USE58-100-15 - (15”) drawer 15-3/8” 391mm

18” 457mm

15” 381mm

15-5/8” 397mm

15-7/8” 403mm

17” 432mm

467 (18-3/8") 192 (7 -9/16")

467 (18-3/8")

USE58-100-18 - (18”) drawer

192 (7 -9/16")

467 (18-3/8")

192 (7 -9/16")

467 (18-3/8")

192 (7 -9/16")

224 (8-13/16") USE58-100-21 533 (21") drawer USE58-100-21 533 (21") drawer USE58-100-21 224 (8-13/16") 533 (21") drawer USE58-100-21 533 (21") drawer 224 (8-13/16")

9 (11/32")

FRAMELESS

18-3/8” 467mm

21” 533mm

543 (21-3/8")

18-3/8” 473mm

18-7/8” 479mm

20” 508mm

USE58-100-21 - (21”) drawer

543 (21-3/8")

256 (10-1/16")

543 (21-3/8")

256 (10-1/16")

543 (21-3/8")

256 (10-1/16")

224 (8-13/16")

18” 457mm

21-3/8” 543mm

24” 610mm

21” 533mm

21-5/8” 549mm

21-7/8” 555mm

23” 584mm

256 (10-1/16") 33 (1-5/16")

(11/32") Assume opening 33 9(1-5/16") 17.54mm (11/16") (5/32”) setback from drawer 30 (1-3/16")

6(11/32") (1/4") 9(1-5/16") 17.5 (11/16")for face frame applications33 Rear brackets will yield a 5mm-41mm (3/16” - 1-5/8”) depth adjustment 33 (1-5/16") 6 (1/4")

9 (11/32") applications: 7 (9/32") 30 (1-3/16") 6(11/32") (1/4") 36.5 (1-7/16") 17.5 (11/16") Setback: 4mm (5/32”) + Drawer Front9Thickness 24.5 (31/32") 30 (1-3/16") 6 (1/4") 7 (9/32") For frameless cabinets, Inside Cabinet Depth Minimum = Slide Length + Setback + 3mm (1/8”) 36.5 (1-7/16") 7 (9/32") 24.5 (31/32")Minimum = Slide Length + Setback + 5mm (3/16”) For face frame cabinets, Inside 36.5 Cabinet Depth (1-7/16") Inside Cabinet Depth Maximum = Slide Length + Setback + 41mm (1-5/8”) 24.5 (31/32") 36.5 (1-7/16") 24.5 (31/32")

FRONT VIEW OF THE DRAWER INSIDE THE CABINET FRONT VIEW OF THE DRAWER INSIDE THE CABINET

OUTSIDE DRAWER WIDTH CALCULATIONS

INSIDE CABINET WIDTH OUTSIDE DRAWER WIDTH MIN. TOP CLEARANCE 6 (1/4") MAX DRAWER THICKNESS 16 (5/8") OPENING

INSIDE CABINET WIDTH MINUS 42 (1-5/8") MAX. DRAWER HEIGHT = OPENING MINUS 19 (3/4") 36.3 24.30 (1-7/16") (15/16") MINIMUM 32 (1-1/4") BOTTOM CLEARANCE 12.70 (1/2")

BOTTOM RECESS 12.70 (1/2")

MAXIMUM DRAWER HEIGHT = OPENING MINUS 19MM (3/4”)

Drawer Side Thickness

Inside Cabinet Width Deduction

5/8” 16mm

3/8” 10mm

19/32” 15mm

15/32” 12mm

9/16” 14mm

1/2” 13mm

5/8” 16mm

15/32” 12mm

23/32” 18mm

Technovation

™

800.463.0660

For

7 (9/32") 30 (1-3/16") 17.5 (11/16") inset drawer front

www.hardwareresources.com

USE58-100-12 305 (12") drawer USE58-100-12 305 (12") drawer USE58-100-12 305 (12") drawer USE58-100-12 305 (12") drawer

USE34 -100 Series

Full Extension

Premium Undermount Slides The NEW Premium Undermount Soft Close Drawer Slides are dependable, durable, long-lasting, smooth, easy-to-install and most of all, worryfree. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face USE34-100-12 frame and frameless, as well as inset and overlay 305 (12") drawer applications. Our new USE34 Premium 314 (12-3/8") 224 (8-13/16") Undermount Slides will accommodate 9 (11/32") 3/4” drawer box material. Available in standard 12”, 15”, 18”, and 21” lengths. 391 (15-3/8") 224 (8-13/16")

USE34-100-12 96drawer (3-3/4") 305 (12") 9 (11/32")

314 (12-3/8") 224 (8-13/16")

Travel

9 (11/32")



USE34-100-18 457 (18") drawer 224 (8-13/16")

USE34-100-21 533 (21") drawer

224 (8-13/16")

391 (15-3/8") 224 (8-13/16")

Description

USE34-100-12

12” Full Extension Slide

USE34-100-15

15” Full Extension Slide

USE34-100-21

800.463.0660

FRONT HOLE PATTERN 23.5 (15/16") 30 (1-3/16")

96 (3-3/4") 9 (11/32")

Part Number

543 (21-3/8") USE34-100-18 USE34-100-18 457 (18") drawer

256 (10-1/16")

18” Full Extension Slide 467 (18-3/8")

21” Full Extension Slide 192 (7 -9/16")

224 (8-13/16")

33 (1-5/16") 9 (11/32")

USE34-100-21 533 (21") drawer

6 (1/4")

224 (8-13/16") 35.5 (1-5/16")

28.5 (5/8")

21.5 (27/32")

REAR NOTCH DIMENSIONS 23.5 (15/16")

256 (10-1/16")

Finish





1/2” 100lb

Zinc

Hole Pattern

Lengths

32mm

12” - 21”

Packaging

Certification

REAR VIEW OF THE DRAWER NOTCH

33 (1-5/16") 6x9

9 (11/32")

6 (1/4")

30 (1-3/16") 7 (9/32")

Load Rating



543 (21-3/8")

7 (9/32")

Full

Clips sold separately.



USE34-100-15 467 (18-3/8") 381 (15") drawer 192 (7 -9/16")



www.hardwareresources.com

USE34-100-15 381 (15") drawer

6 (1/4") 11 (7/16")

35.5 (1-5/16") 28.5 (5/8")

12.70 (1/2")

21.5 (27/32")

MINIMUM 32 (1-1/4")

Technovation

™

 10 pr/ box

Grade 1

USE34 -100 Series

Full Extension

Premium Undermount Slides Construction & Assembly Specifications

USE34-100-15 381 (15") drawer USE34-100-15 381 (15") drawer USE34-100-15 381 (15") drawer USE34-100-15 381 (15") drawer

314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16") 314 (12-3/8") 224 (8-13/16")

391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16") 391 (15-3/8") 224 (8-13/16")

USE34-100-18 457 (18") drawer USE34-100-18 457 (18") drawer 224 (8-13/16") USE34-100-18 457 (18") drawer USE34-100-18 224 (8-13/16") 457 (18") drawer 224 (8-13/16")

9 (11/32")

Slide Length

Total Cabinet Depth

9 (11/32")

12-3/8” 314mm

15” 381mm

Min Inside Max Inside Cabinet Cabinet Depth Depth

12” 305mm

12-5/8” 321mm

12-7/8” 326mm

14” 356mm

USE34-100-15 - (15”) drawer 15-3/8” 391mm

18” 457mm

192 (7 -9/16")

467 (18-3/8")

15” 381mm

15-5/8” 397mm

15-7/8” 403mm

17” 432mm

USE34-100-18 - (18”) drawer

192 (7 -9/16")

467 (18-3/8")

192 (7 -9/16")

467 (18-3/8")

192 (7 -9/16")

18-3/8” 467mm

21” 533mm

543 (21-3/8")

224 (8-13/16")

Min Inside Cabinet Depth

USE34-100-12 - (12”) drawer

9 (11/32")

96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32") 96 (3-3/4") 9 (11/32")

Overall Drawer Length

FACE FRAME

467 (18-3/8")

224 (8-13/16") USE34-100-21 533 (21") drawer USE34-100-21 533 (21") drawer USE34-100-21 224 (8-13/16") 533 (21") drawer USE34-100-21 533 (21") drawer 224 (8-13/16")

9 (11/32")

FRAMELESS

18-3/8” 473mm

18-7/8” 479mm

20” 508mm

USE34-100-21 - (21”) drawer

543 (21-3/8")

256 (10-1/16")

543 (21-3/8")

256 (10-1/16")

543 (21-3/8")

256 (10-1/16")

224 (8-13/16")

18” 457mm

21-3/8” 543mm

24” 610mm

21” 533mm

21-5/8” 549mm

21-7/8” 555mm

23” 584mm

256 (10-1/16") 33 (1-5/16")

(11/32") Assume opening 33 9(1-5/16") 23.58mm (15/16") (5/16”) setback from drawer 30 (1-3/16")

6 (1/4")

9(1-5/16") (11/32") 23.5 (15/16")for face frame applications33 Rear brackets will yield a 5mm-41mm (3/16” - 1-5/8”) depth adjustment 7 (9/32") 30 (1-3/16") 23.5 (15/16")

www.hardwareresources.com

USE34-100-12 305 (12") drawer USE34-100-12 305 (12") drawer USE34-100-12 305 (12") drawer USE34-100-12 305 (12") drawer

6(11/32") (1/4") 33 9(1-5/16")

28.5 (5/8")

21.5 (27/32")

FRONT VIEW OF THE DRAWER INSIDE THE CABINET FRONT VIEW OF THE DRAWER INSIDE THE CABINET

OUTSIDE DRAWER WIDTH CALCULATIONS

INSIDE CABINET WIDTH OUTSIDE DRAWER WIDTH MIN. TOP CLEARANCE 6 (1/4") MAX DRAWER THICKNESS 19 (3/4") OPENING

Drawer Side Thickness

3/4” 19mm

Inside Cabinet Width Deduction

1/2” 13mm

INSIDE CABINET WIDTH MINUS 50 (2") MAX. DRAWER HEIGHT = OPENING MINUS 22 (7/8") 33.5 (1-5/16") 21.5 (27/32") MINIMUM 32 (1-1/4") BOTTOM CLEARANCE 15.90 (5/8")

BOTTOM RECESS 12.70 (1/2")

MAXIMUM DRAWER HEIGHT = OPENING MINUS 22MM (7/8”)

Technovation

™

800.463.0660

For inset drawer front applications: 7 (9/32") 30 (1-3/16") (11/32") (1/4") 35.5 (1-5/16") 23.5 (15/16") Setback: 8mm (5/16”) + Drawer Front96Thickness 28.5 (5/8") 21.5 (27/32") 30 (1-3/16") 6 (1/4") 7 (9/32") 35.5 (1-5/16") For frameless cabinets, Inside Cabinet Depth Minimum = Slide Length + Setback + 3mm (1/8”) 28.5 (5/8") cabinets, Inside Cabinet 7 (9/32") 21.5 (27/32") For face frame 35.5 (1-5/16")Depth Minimum = Slide Length + Setback + 5mm (3/16”) 28.5 (5/8") Inside35.5 Cabinet 21.5Depth (27/32") Maximum = Slide Length + Setback + 41mm (1-5/8”) (1-5/16")

USE Series

Full Extension

Standard use soft close full extension concealed undermount drawer slide. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face frame and frameless, as well as inset USE12 305 (12") applications. drawer and overlay Conforms to 318 (12-1/2") ANSI/BHMA Grade 1 standard. Release 224 (8-13/16") 9 (11/32") clips allow for two, four and six way adjustments. Slides will accomodate 1/2” USE15 and 5/8” drawer box 381 (15") drawer material. 394 (15-1/2") 224 (8-13/16")

USE12 (5-1/16") 305 (12")128 drawer 9 (11/32")

318 (12-1/2") 224 (8-13/16")

Travel

9 (11/32")



USE18 457 (18") drawer

224 (8-13/16")

128 (5-1/16")

Part Number (includes 2-way Clips)

(without Clips)

USE12

USE58-50-12

12” Full Extension Slide

USE15

USE58-50-15

15” Full Extension Slide

546 (21-1/2")USE18 457 (18") drawer

USE18 USE21

FRONT HOLE PATTERN

800.463.0660

Full

394 (15-1/2") (8-13/16") Part 224 Number

9 (11/32") Description

USE58-50-18 256 (10-1/16") 470 (18-1/2") USE58-50-21 224 (8-13/16")

18” Full Extension Slide 21”192 Full Extension Slide (7 -9/16")

33 (1-5/16")

Load Rating

Finish



100lb Hole Pattern

Zinc Lengths

9 (11/32")

17.5 (11/16")

USE21 533 (21") drawer 30 (1-3/16")

6 (1/4")



546 (21-1/2")

7 (9/32") 224 (8-13/16") 36.5 (1-7/16")

256 (10-1/16")

24.5 (31/32")

REAR NOTCH DIMENSIONS 17.5 (11/16")

32mm

12” - 21”

Packaging

Certification

REAR VIEW OF THE DRAWER NOTCH

33 (1-5/16") 6 (1/4")

9 (11/32")

7 (9/32")

30 (1-3/16") 7 (9/32")



USE21 533 (21") drawer

USE15 470 (18-1/2") 381 (15") drawer 192 (7 -9/16")



www.hardwareresources.com

Undermount Slides

6 (1/4") 11 (7/16") 12.70 (1/2")

36.5 (1-7/16")

24.5 (31/32") 32 (1-1/4")

Technovation

™

 10 pr/ box

Grade 1

USE Series

Full Extension Undermount Slides

Construction & Assembly Specifications

USE15 381 (15") drawer USE15 381 (15") drawer USE15 381 (15") drawer USE15 381 (15") drawer

394 (15-1/2") 224 (8-13/16") 394 (15-1/2") 224 (8-13/16") 394 (15-1/2") 224 (8-13/16") 394 (15-1/2") 224 (8-13/16")

USE18 457 (18") drawer USE18 457 (18") drawer 224 (8-13/16") USE18 457 (18") drawer USE18 224 (8-13/16") 457 (18") drawer

9 (11/32") 9 (11/32")

Slide Length

Total Cabinet Depth

9 (11/32")

12-1/2” 318mm

15” 381mm

Min Inside Max Inside Cabinet Cabinet Depth Depth

12” 305mm

12-5/8” 321mm

12-7/8” 326mm

14-9/16” 369mm

USE15 & USE58-50-15 - (15”) drawer 15-1/2” 394mm

18” 457mm

192 (7 -9/16")

470 (18-1/2")

15-11/16” 398mm

15” 381mm

15-7/8” 403mm

17-9/16” 446mm

USE18 & USE58-50-18 - (18”) drawer

192 (7 -9/16")

470 (18-1/2")

192 (7 -9/16")

470 (18-1/2")

18-1/2” 470mm

192 (7 -9/16")

224 (8-13/16")

21” 533mm

546 (21-1/2")

224 (8-13/16")

Min Inside Cabinet Depth

USE12 & USE58-50-12 - (12”) drawer

9 (11/32")

128 (5-1/16") 9 (11/32") 128 (5-1/16") 9 (11/32") 128 (5-1/16") 9 (11/32") 128 (5-1/16") 9 (11/32")

Overall Drawer Length

FACE FRAME

470 (18-1/2")

224 (8-13/16") USE21 533 (21") drawer USE21 533 (21") drawer USE21 533 (21") drawer 224 (8-13/16") USE21 533 (21") drawer 224 (8-13/16")

318 (12-1/2") 224 (8-13/16") 318 (12-1/2") 224 (8-13/16") 318 (12-1/2") 224 (8-13/16") 318 (12-1/2") 224 (8-13/16")

FRAMELESS

18-11/16” 474mm

18” 457mm

18-7/8” 479mm

20-9/16” 522mm

USE21 & USE58-50-21 - (21”) drawer

546 (21-1/2")

256 (10-1/16")

546 (21-1/2")

256 (10-1/16")

546 (21-1/2")

256 (10-1/16")

224 (8-13/16")

21-1/2” 546mm

24” 610mm

21-11/16” 550mm

21” 533mm

21-7/8” 555mm

23-9/16” 598mm

(10-1/16") 33256 (1-5/16")

(11/32") Assume 4mm (5/32”) setback from drawer opening 33 9(1-5/16") 17.5 (11/16") 30 (1-3/16")

6(11/32") (1/4") 9(1-5/16") Rear brackets for face frame applications will 33 yield a 5mm-48mm (3/16” - 1-7/8”) depth adjustment 17.5 (11/16") 7 (9/32") 30 (1-3/16") (11/16")

www.hardwareresources.com

USE12 305 (12") drawer USE12 305 (12") drawer USE12 305 (12") drawer USE12 305 (12") drawer

33 (1-5/16") 6 (1/4")

24.5 (31/32")

FRONT VIEW OF THE DRAWER INSIDE THE CABINET FRONT VIEW OF THE DRAWER INSIDE THE CABINET

MAXIMUM DRAWER HEIGHT = OPENING MINUS 19MM (3/4”)

INSIDE CABINET WIDTH OUTSIDE DRAWER WIDTH

OUTSIDE DRAWER WIDTH CALCULATIONS

MIN. TOP CLEARANCE 6 (1/4") DRAWER THICKNESS OPENING

INSIDE CABINET WIDTH MINUS 42 (1-5/8") MAX. DRAWER HEIGHT = OPENING MINUS 19 (3/4") 36.30 24.30 (1-7/16") (15/16") 32 (1-1/4") BOTTOM CLEARANCE 12.70 (1/2")

BOTTOM RECESS 12.70 (1/2")

Drawer Side Thickness

5/8” 16mm

19/32” 15mm

9/16” 14mm

1/2” 13mm

15/32” 12mm

Inside Cabinet Width Deduction

3/8” 10mm

15/32” 12mm

9/16” 14mm

5/8” 16mm

23/32” 18mm

Technovation

™

800.463.0660

9 (11/32") 17.5 For inset drawer front applications: 7 (9/32") 9 6(11/32") 30 (1-3/16") 36.5 (1-7/16") (1/4") 17.5 (11/16") Setback: 5mm (3/16”) + Drawer Front Thickness 24.5 (31/32") 30 cabinets, (1-3/16") 6 (1/4") 7 (9/32") For frameless Inside Cabinet Depth 36.5 (1-7/16") Minimum = Slide Length + Setback + 3mm (1/8”) (9/32") cabinets, Inside Cabinet Depth For face 7frame Minimum = Slide Length + Setback + 5mm (3/16”) 24.5 (31/32") 36.5 (1-7/16") Inside Cabinet Depth Maximum = Slide Length + Setback + 48mm (1-5/16”) 24.5 (31/32") 36.5 (1-7/16")

4-Way & 6- Way Adjustable Release Clips USE58-100 & USE34-100 Undermount Slides 6-Way Adjustable Clip • Vertical adjustment: +/- 3mm (1/8”) • Horizontal adjustment: +/- 2mm (5/64”) • Depth adjustment: +/- 2.5mm (3/32”)

www.hardwareresources.com

• For inset applications Description

Part Number

6-way adjustable clip

US-CLIP-6W

Ctn Qty

200/ctn

Packaged by pair (L/R)

6-Way Adjustable Clip with Zinc Base • Vertical adjustment: +/- 3mm (1/8”) • Horizontal adjustment: +/- 2mm (5/64”) • Depth adjustment: +/- 2.5mm (3/32”) • For inset applications • Die-cast zinc base Description

Part Number

6-way adjustable clip with zinc base

US-CLIP-6WZ

Ctn Qty

200/ctn

Packaged by pair (L/R)

4-Way Adjustable Clip • Vertical adjustment: +/- 3mm (1/8”)

800.463.0660

• Horizontal adjustment: +/- 2mm (5/64”)

Description

Part Number

4-way adjustable clip

US-CLIP-4W

Ctn Qty

200/ctn

Packaged by pair (L/R)

4-Way Adjustable Clip with Zinc Base • Vertical adjustment: +/- 3mm (1/8”) • Horizontal adjustment: +/- 2mm (5/64”) • Die-cast zinc base

Technovation

™

Description

Part Number

4-way adjustable clip with zinc base

US-CLIP-4WZ

Ctn Qty

200 pr/ctn

Packaged by pair (L/R)

2-Way Adjustable Release Clips USE & USE58-50 Undermount Slides 2-Way Adjustable CliP • Vertical adjustment: +/- 3mm (1/8”) • Metal base

Part Number

2-way adjustable clip

US-CLIP-2W

Ctn Qty

200/ctn

Packaged by pair (L/R)

800.463.0660

www.hardwareresources.com

Description

Technovation

™

209FU Series

1” Overtravel

800.463.0660

Part Number

Description

209FU16

16” Zinc Slide

209FU18

18” Zinc Slide

209FU20

20” Zinc Slide

209FU22

22” Zinc Slide

209FU24

24” Zinc Slide

209FU26

26” Zinc Slide

209FU28

28” Zinc Slide

209FU30

30” Zinc Slide

Dynamic Load Rating

Travel



225lb

1” Over

Profile

Finish



54mm



Side Spacing



Zinc Lengths

 3/4”

16” - 30”

Hole Pattern

Material Dimensions



Extra heavy duty side mount ball bearing drawer slide with 1” overtravel. For use in commercial millwork, large storage drawers, shelves, store fixtures and supply storage. To be used in frameless applications. Conforms to ANSI/BHMA Grade 1 HD-200 standard.



www.hardwareresources.com

Extra Heavy Duty Ball Bearing Slides

32mm

2.2mm x 2.0mm x 2.0mm

Packaging

Certification

 1” Overtravel

 6 pr/ box

Technovation

™

Grade 1

209FU Series

1” Overtravel

Extra Heavy Duty Ball Bearing Slides

404

128

209FU18 - 18”

455

224

209FU20 - 20”

506

224

209FU22 - 22”

557

288

209FU24 - 24”

608

160

292

209FU26 - 26”

659

160

292

209FU28 - 28”

710

160

356

209FU30 - 30”

761

160

356

Specifications 209FU16 - 16”

406

–

209FU18 - 18”

457

128

–

209FU20 - 20”

508

128

–

209FU22 - 22”

559

128

209FU24 - 24”

610

160

128

209FU26 - 26”

661

160

128

209FU28 - 28”

712

160

209FU30 - 30”

763

160

Technovation

800.463.0660

Specifications

CABINET MEMBER

209FU16 - 16”

www.hardwareresources.com

DRAWER MEMBER

™

300FU Series

Full Extension

800.463.0660

Dynamic Load Rating

150lb Profile

Part Number

Description

300FU12

12” Zinc Slide

300FU14

14” Zinc Slide

300FU16

16” Zinc Slide

300FU18

18” Zinc Slide

300FU20

20” Zinc Slide

300FU22

22” Zinc Slide

300FU24

24” Zinc Slide

300FU26

26” Zinc Slide

300FU28

28” Zinc Slide

 2”

 Side Spacing

Travel

 Full Finish



Zinc Lengths

 1/2”

12” - 28”

Hole Pattern

Material Dimensions



Heavy duty side mount ball bearing drawer slide. For use in commercial millwork, pull-out trays, shelves and supply storage. To be used in frameless applications. Conforms to ANSI/BHMA Grade 1 standard.



www.hardwareresources.com

Heavy Duty Ball Bearing Slides

32mm

1.5mm x 1.5mm x 1.5mm

Packaging

Certification

 Full Extension

 15 pr/ box

Technovation

™

Grade 1

300FU Series

Full Extension

Heavy Duty Ball Bearing Slides Hole Pattern and Length Specifications

Specifications

300FU12 - 12”

298

300FU14 - 14”

348

300FU16 - 16”

398

124

300FU18 - 18”

448

192

146

300FU20 - 20”

498

160

106

300FU22 - 22”

548

192

106

300FU24 - 24”

598

224

156

300FU26 - 26”

648

256

168

300FU28 - 28”

698

288

193

www.hardwareresources.com

DRAWER MEMBER

Specifications

300FU12 - 12”

300

136

300FU14 - 14”

350

160

300FU16 - 16”

400

160

300FU18 - 18”

450

160

128

300FU20 - 20”

500

160

128

300FU22 - 22”

550

160

128

300FU24 - 24”

600

160

128

300FU26 - 26”

650

160

128

300FU28 - 28”

700

160

128

Technovation

800.463.0660

CABINET MEMBER

™

301FU Series

1/2” Overtravel

800.463.0660

Part Number

Description

301FU10

10” Zinc Slide

301FU12

12” Zinc Slide

301FU350

350mm Zinc Slide

301FU14

14” Zinc Slide

301FU16

16” Zinc Slide

301FU18

18” Zinc Slide

301FU20

20” Zinc Slide

301FU22

22” Zinc Slide

301FU24

24” Zinc Slide

301FU26

26” Zinc Slide

301FU28

28” Zinc Slide

Dynamic Load Rating



100lb

1/2” Over

Profile

Finish



45mm



Side Spacing



Zinc Lengths

 1/2”

10” - 28”

Hole Pattern

Material Dimensions

32mm

1.2mm x 1.2mm x 1.5mm

Packaging

Certification

 1/2” Overtravel

Travel



Standard use side mount ball bearing drawer slide with 1/2” overtravel. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face frame and frameless, as well as inset and overlay applications. Conforms to ANSI/BHMA Grade 1 HD-100 standard.



www.hardwareresources.com

Heavy Duty Ball Bearing Slides

 15 pr/ box

Technovation

™

Grade 1

301FU Series

1/2” Overtravel

Heavy Duty Ball Bearing Slides Hole Pattern and Length Specifications

301FU10 - 10”

Specifications

250

175

38.5

301FU12 - 12”

303

147

50.5

301FU14 - 14”

354

160

57.8

301FU16 - 16”

404

128

192

96.6

301FU18 - 18”

455

141

211

103.6

301FU20 - 20”

506

173

243

141.8

301FU22 - 22”

557

205

275

179.6

www.hardwareresources.com

DRAWER MEMBER

301FU24 - 24”

608

224

288

186

301FU26 - 26”

658

236.5

339

250.4

301FU28 - 28”

709

255.5

320

248.6

301FU10 - 10”

254

301FU12 - 12”

304.8

301FU14 - 14”

355.6

47.3

301FU16 - 16”

406.4

38.5

301FU18 - 18”

457.2

128

25.45

32.15

Specifications

301FU20 - 20”

508

128

25.45

32.15

301FU22 - 22”

558.8

128

57.8

25.45

32.15

301FU24 - 24”

609.6

128

44.6

25.45

32.15

301FU26 - 26”

660.4

128

192

31.4

25.45

32.15

301FU28 - 28”

711.2

128

192

82.2

25.45

32.15

Technovation

800.463.0660

CABINET MEMBER

™

303FU Series

Full Extension

800.463.0660

Zinc Part Number

Description

303FU8

8” Zinc Slide

303FU10

10” Zinc Slide

303FU12

12” Zinc Slide

303FU14

14” Zinc Slide

303FU16

16” Zinc Slide

303FU18

18” Zinc Slide

303FU20

20” Zinc Slide

303FU22

22” Zinc Slide

303FU24

24” Zinc Slide

303FU26

26” Zinc Slide

303FU28

28” Zinc Slide

Black

100lb

Description

303FU10BLK

10” Black Slide

303FU12BLK

12” Black Slide

303FU14BLK

14” Black Slide

303FU16BLK

16” Black Slide

303FU18BLK

18” Black Slide

303FU20BLK

20” Black Slide

303FU22BLK

22” Black Slide

™

Travel

 Full

Profile

Finish





45mm



Zinc & Black

Side Spacing

Lengths

 1/2”

8” - 28”

Hole Pattern

Material Dimensions

32mm

1.0mm x 1.0mm x 1.2mm

Packaging

Certification



Part Number

Technovation

Dynamic Load Rating



Standard use full extension side mount ball bearing drawer slide. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face frame and frameless, as well as inset and overlay applications. Conforms to ANSI/BHMA Grade 1 HD-100 standard.



www.hardwareresources.com

Heavy Duty Ball Bearing Slides

 15 pr/ box

Grade 1

303FU Series

Full Extension

Heavy Duty Ball Bearing Slides Hole Pattern and Length Specifications DRAWER MEMBER

Zinc 303FU8 303FU10 303FU12 303FU14 303FU16 303FU18 303FU20 303FU22 303FU24 303FU26 303FU28

Black 303FU10BLK 303FU12BLK 303FU14BLK 303FU16BLK 303FU18BLK 303FU20BLK 303FU22BLK -

CABINET MEMBER

A3 128 169 96 128 128 160 192 224 192 192 192

B3 128 128 192 192 224 224 320 224 256

C3 160 160

D3 90 85 110.5 101 95 81 140 167 227

L B

Description 303FU8 303FU10 303FU12 303FU14 303FU16 303FU18 303FU20 303FU22 303FU24 303FU26 303FU28

Specifications 303FU10BLK 303FU12BLK 303FU14BLK 303FU16BLK 303FU18BLK 303FU20BLK 303FU22BLK -

L 200 250 300 350 400 450 500 550 600 650 700

A 64 64 128 128 128 128 128 128 128 128 128

B 76 76 96 96 96 96 96 96 96 164 192

C 64 128 128 128 192 192 224

800.463.0660

Description 8” Slide 10” Slide 12” Slide 14” Slide 16” Slide 18” Slide 20” Slide 22” Slide 24” Slide 26” Slide 28” Slide

L3 197 247 297 347 397 447 497 547 597 647 697

www.hardwareresources.com

Description 8” Slide 10” Slide 12” Slide 14” Slide 16” Slide 18” Slide 20” Slide 22” Slide 24” Slide 26” Slide 28” Slide

D – 64 64 64 64 64

Technovation

™

Soft Close Full Extension

303FUSFT Series

Heavy Duty Ball Bearing Slides

800.463.0660

Standard use soft close full extension side mount ball bearing drawer slide. For use in residential kitchen cabinetry, commercial millwork and furniture. Compatible with both face frame and frameless, as well as inset and overlay applications. Conforms to ANSI/BHMA Grade 1 HD-100 standard.

Dynamic Load Rating

100lb Profile

Part Number

Description

303FUSFT12

12” Zinc Slide

303FUSFT14

14” Zinc Slide

303FUSFT16

16” Zinc Slide

303FUSFT18

18” Zinc Slide

303FUSFT20

20” Zinc Slide

303FUSFT22

22” Zinc Slide

303FUSFT24

24” Zinc Slide

303FUSFT26

26” Zinc Slide

303FUSFT28

28” Zinc Slide



45mm



Side Spacing

Travel

 Full Finish



Zinc Lengths





www.hardwareresources.com

Soft Close Technology

1/2”

12” - 28”

Hole Pattern

Material Dimensions



Dura-Close™

32mm

1.0mm x 1.0mm x 1.2mm

Packaging

Certification

 Full Extension

 15 pr/ box

Technovation

™

Grade 1

303FUSFT Series

Soft Close Full Extension

Heavy Duty Ball Bearing Slides Hole Pattern and Length Specifications

Specifications

303FUSFT12 -12”

298

128

303FUSFT14 - 14”

348

128

303FUSFT16 - 16”

398

128

192

106

303FUSFT18 - 18”

448

160

192

303FUSFT20 - 20”

498

192

224

303FUSFT22 - 22”

548

224

303FUSFT24 - 24”

598

192

320

142

303FUSFT26 - 26”

648

192

224

160

167

303FUSFT28 - 28”

698

192

256

160

227

Specifications

303FUSFT12 -12”

300

303FUSFT14 - 14”

350

128

303FUSFT16 - 16”

400

160

303FUSFT18 - 18”

450

224

303FUSFT20 - 20”

500

256

303FUSFT22 - 22”

550

288

303FUSFT24 - 24”

600

352

303FUSFT26 - 26”

650

206

224

303FUSFT28 - 28”

700

256

224

www.hardwareresources.com

DRAWER MEMBER

Technovation

800.463.0660

CABINET MEMBER

™

303FUPT Series

Full Extension

800.463.0660

Dynamic Load Rating

100lb Profile

Part Number

Description

303FUPT12

12” Zinc Slide

303FUPT14

14” Zinc Slide

303FUPT16

16” Zinc Slide

303FUPT18

18” Zinc Slide

303FUPT20

20” Zinc Slide

303FUPT22

22” Zinc Slide



45mm



Side Spacing

Travel

 Full Finish



Zinc Lengths

 1/2”

12” - 22”

Hole Pattern

Material Dimensions



Standard use push to open full extension side mount ball bearing drawer slide. For use in residential kitchen cabinetry, commercial millwork and furniture where minimal hardware and clean lines are desired. Compatible with both face frame and frameless, as well as inset and overlay applications.



www.hardwareresources.com

Push-to-Open Ball Bearing Slides

32mm

1.0mm x 1.0mm x 1.2mm

Packaging

Certification

 Full Extension

 15 pr/ box

Technovation

™

Grade 1

303FUPT Series

Full Extension

Push-to-Open Ball Bearing Slides Hole Pattern and Length Specifications

Specifications

303FUPT12 - 12”

288

128

220

303FUPT14 - 14”

338

128

255

303FUPT16 - 16”

388

128

192

290

303FUPT18 - 18”

438

160

192

320

303FUPT20 - 20”

488

192

224

340

303FUPT22 - 22”

538

224

365

Specifications

303FUPT12 - 12”

300

303FUPT14 - 14”

350

303FUPT16 - 16”

400

128

303FUPT18 - 18”

450

160

303FUPT20 - 20”

500

256

303FUPT22 - 22”

550

288

www.hardwareresources.com

DRAWER MEMBER

Technovation

800.463.0660

CABINET MEMBER

™

307FU Series

Full Extension

800.463.0660

Dynamic Load Rating

75lb Profile

Part Number

Description

307FU10

10” Zinc Slide

307FU12

12” Zinc Slide

307FU14

14” Zinc Slide

307FU16

16” Zinc Slide

307FU18

18” Zinc Slide

307FU20

20” Zinc Slide

307FU22

22” Zinc Slide



36mm



Side Spacing

Travel

 Full Finish



Zinc Lengths

 1/2”

10” - 22”

Hole Pattern

Material Dimensions



Medium duty side mount ball bearing drawer slide with minimal profile height. For use in residential kitchen cabinetry, desks, furniture or any other application where a minimal profile is desired. Compatible with both face frame and frameless, as well as inset and overlay applications.



www.hardwareresources.com

Medium Duty Ball Bearing Slides

32mm

1.2mm x 1.0mm x 1.2mm

Packaging

Certification

 Full Extension

 15 pr/ box

Technovation

™

Grade 1

307FU Series

Full Extension

Medium Duty Ball Bearing Slides Hole Pattern and Length Specifications

Specifications

307FU10 - 10”

248

179

307FU12 - 12”

298

223

163

307FU14 - 14”

348

261

163

307FU16 - 16”

398

287

163

307FU18 - 18”

448

309

163

355

307FU20 - 20”

498

333

163

387

227

307FU22 - 22”

548

333

163

419

227

www.hardwareresources.com

DRAWER MEMBER

Specifications

307FU10 - 10”

240

185

307FU12 - 12”

300

259

307FU14 - 14”

350

259

307FU16 - 16”

400

259

323

307FU18 - 18”

450

259

387

307FU20 - 20”

500

259

387

451

307FU22 - 22”

550

259

387

451

Technovation

800.463.0660

CABINET MEMBER

™

900 Series

110º Hinges

Heavy Duty European Hinges

www.hardwareresources.com

900 Series hinge is designed for heavy duty applications. The stylish pewter finish seamlessly blends into any modern or contemporary design. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. The heavy duty steel spring and linkage system provides for double the Grade 2 ANSI/BHMA life cycle requirement. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

Half Overlay 9mm Crank

Application

Opening Angle

Face frame



Frameless

110º

Usage

Finish





Residential Commerical

Pewter

Full Inset 15mm Crank

Adjustment

Overlay



110˚ Hinges Screw-In

900.0535.05

900.0536.05

900.0537.05

Press-In

900.0181.25

900.0179.05

900.0280.05

6 way

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Technovation

Material

 Steel

Packaging

Certification



200/ carton

™

Full Half Inset

900 Series

110º Hinges

Heavy Duty European Hinges Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

18.5

20.5

21.5

24.5

Fixed distance = 13

B = boring distance

27.5

Overlay

26.0 37.5

Fixed distance =3

24.0 33.0

Fixed distance = -6

B = boring distance

Reveal

B = boring distance H 0

Reveal

9.5

B = boring distance

Tab

Abbreviations H

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

= Side panel width

Hinge Length

68.0

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

* Inset is “T+” (T=door thickness)

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

www.hardwareresources.com

T + 37 T + 37

7 3

4 455

Overlay

11.2 11.2

11.2 11.2 P

37 37

68.5 68.5

37 37

11.211.2 H

™

800.463.0660

11.2 11.2

Frameless

70 70

11.2 11.2

Frameless

11.211.2 67.567.5

Frameless

70 70

68.5 68.5

67.567.5

Full overlay - 0mm crank

900 Series

125º Hinges

Heavy Duty European Hinges

www.hardwareresources.com

Our 900 Series hinge is designed for heavy duty applications. The stylish pewter finish seamlessly blends into any modern or contemporary design. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. The heavy duty steel spring and linkage system provides for double the ANSI/BHMA life cycle requirement. Clipon base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

125˚ Hinges Screw-In

900.0U85.05

Press-In

900.0U84.05

Lever-Top

Application

Opening Angle

Face frame



Frameless

125º

Usage

Finish





Residential Commerical

Pewter

Adjustment

Overlay

 6 way

900.0U94.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Technovation

Material

 Steel

Packaging

Certification



200/ carton

™

Full

900 Series

125º Hinges

Heavy Duty European Hinges Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

Frameless

11.2 11.2

www.hardwareresources.com

67.5 67.5

Full overlay - 0mm crank

19.5

21.5

22.5

25.5 28.5

Overlay

Fixed distance = 13

Tab

4 455

B = boring distance

9.5

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

800.463.0660

11.2 11.2

37 37

67.5 67.5

Frameless

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

900 Series

165º Hinges

Heavy Duty European Hinges

www.hardwareresources.com

Our 900 Series 165° hinge is designed for heavy duty applications and zero door gap. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It has cold rolled steel construction with nickel plating and is guaranteed to surpass all ANSI, BHMA & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

Opening Angle

Face frame



Frameless

165º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay



165˚ Hinges Press-In

Application

6 way

900.0M73.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Technovation

Material

 Steel

Packaging

Certification



50/ carton

™

Full

900 Series

165º Hinges

Heavy Duty European Hinges Full overlay - 0mm crank

Thick door application

Face frame

69 69

. 11

Frameless

www.hardwareresources.com

11.2 11.2

165˚

Z=Gap 28

T = door thickness

37 37

69 69

Twin door application 19

Overlay

-4

-2

-1

Fixed distance = 14

B = boring distance

165˚

Minimum reveal table

S 66

T = door thickness 9.5

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

* Inset is “T+” (T=door thickness)

= Door thickness

= Side panel width

Tab

4 455

Abbreviations

Hinge Length

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

D epth 11.2

Technovation

™

800.463.0660

11.2

11.2 11.2

700 Series

90º Hinges

European Hinges with Built-in Soft Close

www.hardwareresources.com

Our 700 Series hinge has a built-in soft close damper that brings the door to a soft, quiet close. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. The linkage is made of heavy gauge steel and will outlast the life of the cabinet. The hinge is tested past 100,000 cycles (more than 2x the requirement) and is guaranteed to surpass all ANSI, BHMA, & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Application

Opening Angle

Face frame



Frameless

Mounting

Full Overlay 0mm Crank

Press-In

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

6 way

700.0161.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Technovation

Full Material

 Steel

Packaging

Certification



200/ carton

™

Restricted

Usage



90˚ Hinges - Restricted

90º

700 Series

90º Hinges

European Hinges with Built-in Soft Close Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

Frameless

11.2 11.2

www.hardwareresources.com

68 67.5

Full overlay - 0mm crank

Overlay 18

4.5

6.5

7.5

10.5

13.5

Tab

4 455

B = boring distance

9.5

Fixed distance = 13

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

800.463.0660

11.2 11.2

37 37

68 67.5

Frameless

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

700 Series

110º Hinges

European Hinges with Built-in Soft Close

www.hardwareresources.com

Our 700 Series hinge has a built-in soft close damper that brings the door to a soft and quiet close. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. The linkage is made of heavy gauge steel and will outlast the life of the cabinet. The hinge is tested past 100,000 cycles (more than 2x the requirement) and is guaranteed to surpass all ANSI, BHMA, & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

Half Overlay 9mm Crank

Opening Angle

Face frame



Frameless

110º

Usage

Finish

Full Inset 15mm Crank





Residential Commerical

Nickel Plating

700.0537.25

Adjustment

Overlay

110˚ Hinges 700.0535.25 Screw-In

700.0534.25 (screw adjust)

700.0536.25



700.0181.25 Press-In

700.0171.25 (screw adjust)

700.0179.25

700.0280.25

All hinges are cam adjustable unless stated otherwise

800.463.0660

Application

6 way Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Half Inset Material

 Steel Certification

 200/ carton

Technovation

™

Grade 2

700 Series

110º Hinges

European Hinges with Built-in Soft Close Full inset - 15mm crank

Face frame

B = boring distance

Fixed distance = 13

Overlay 8

2.5

1.5

0.5

Fixed distance =3

B = boring distance H 0

Reveal

25.5

Fixed distance = -5.5

B = boring distance 9.5

Tab

B = boring distance Abbreviations H

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

= Side panel width

Hinge Length

68 (67.5 inset)

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

* Inset is “T+” (T=door thickness)

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

www.hardwareresources.com

37 37

4 455

Overlay

11.2 11.2

11.2 11.2 S

37 37

68 68

37 37

11.211.2

800.463.0660

Frameless

67.5 67.5

11.2 11.2

68 68 11.2 11.2

Frameless

11.211.2 68 68

Frameless

67.5 67.5

Half overlay - 9mm crank

68 68

Full overlay - 0mm crank

700 Series

125º Hinges

European Hinges with Built-in Soft Close

www.hardwareresources.com

Mounting

Full Overlay 0mm Crank

125˚ Hinges Screw-In

700.0U85.05

Press-In

700.0U84.05

Easy-Fix with Cover

700.0U86.05

Lever-Top

Application

Opening Angle

Face frame



Frameless

125º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

700.0U94.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Material

 Steel Certification

 200/ carton

Technovation

™

Grade 2

700 Series

125º Hinges

European Hinges with Built-in Soft Close Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

Frameless

11.2 11.2

www.hardwareresources.com

68 68

Full overlay - 0mm crank

Overlay 18

Fixed distance = 13

Tab

4 455

B = boring distance

9.5

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

800.463.0660

11.2 11.2

37 37

68 68

Frameless

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

700 Series

165º Hinges

European Hinges with Built-in Soft Close

www.hardwareresources.com

Our 700 Series 165° hinge has a built-in soft close damper that brings the door to a soft, quiet close, and is designed for a zero door gap. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It has cold rolled steel construction with nickel plating and is guaranteed to surpass all ANSI, BHMA & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

Opening Angle

Face frame



Frameless

165º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay



165˚ Hinges Press-In

Application

6 way

700.0M73.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Material

 Steel Certification

 50/ carton

Technovation

™

Grade 2

700 Series

165º Hinges

European Hinges with Built-in Soft Close Full overlay - 0mm crank

Thick door application

Face frame

68.5 68.5

. 11

Frameless

www.hardwareresources.com

11.2 11.2

165˚

Z=Gap 28

Twin door application

37 37

Overlay

-5

58.5

-3

60.5

-2

61.5

64.5

67.5

B = boring distance

11.2

11.2 11.2

165˚

Minimum reveal table

Fixed distance = 12

T = door thickness 9.5

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

* Inset is “T+” (T=door thickness)

= Door thickness

= Side panel width

Tab

68.5

4 455

Abbreviations

Hinge Length

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

D epth 11.2

Technovation

™

800.463.0660

68.5 68.5

T = door thickness

500 Series

90º Hinges European Hinges

www.hardwareresources.com

The 500 Series hinge is our standard European hinge. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It is made from cold rolled steel construction with nickel plating. The hinge is tested past 100,000 cycles (more than 2x the requirement) and is guaranteed to surpass all ANSI, BHMA, & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Application

Opening Angle

Face frame



Frameless

Mounting

Full Overlay 0mm Crank

Press-In

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

6 way

500.0161.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

Restricted

Usage



90˚ Hinges - Restricted

90º

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Material

 Steel Certification

 200/ carton

Technovation

™

Grade 2

500 Series

90º Hinges European Hinges Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

Frameless

11.2 11.2

www.hardwareresources.com

6767

Full overlay - 0mm crank

Overlay 16

Fixed distance = 11

Tab

4 455

B = boring distance

9.5

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

38.5

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

800.463.0660

11.2 11.2

38.5 38.5

6767

Frameless

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

500 Series

110º Hinges European Hinges

www.hardwareresources.com

Mounting

Full Overlay 0mm Crank

Half Overlay 9mm Crank

Full Inset 15mm Crank

110˚ Hinges 500.0535.05 Screw-In

Press-In

Easy-Fix

500.0534.05 (screw adjust)

500.0536.05

500.0537.05

500.0181.05

500.0179.05

500.0171.05 (screw adjust)

500.0279.05 (screw adjust)

500.0186.05

500.0539.05

500.0280.05

800.463.0660

All hinges are cam adjustable unless stated otherwise

Application

Opening Angle

Face frame



Frameless

110º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Half Inset Material

 Steel Certification

 200/ carton

Technovation

™

Grade 2

500 Series

110º Hinges European Hinges Full inset - 15mm crank

Face frame

Fixed distance = 12

B = boring distance

6.5

7.5

8.5

2.5

1.5

B = boring distance

Reveal 0.5

36.5

Fixed distance = 2.5

33.5

Fixed distance = -5.5

B = boring distance H 0

Reveal

-1

-3

19 14.5 27

9.5 Tab

B = boring distance Abbreviations H

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

= Side panel width

Hinge Length

67 (65.5 inset)

Mounting Dimension for Frameless Application*

38.5

Cup bore depth

11.2

* Inset is “T+” (T=door thickness)

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

www.hardwareresources.com

T + 38.5 T + 38.5

S 27

9.5 14.5

Overlay 5.5

4 455

Overlay

11.2 11.2

11.2 11.2 S

38.5 38.5

67 67

38.538.5

11.211.2

800.463.0660

Frameless

65.5 65.5

11.2 11.2

67 67 11.2 11.2

Frameless

11.211.2 67 67

Frameless

65.5 65.5

Half overlay - 9mm crank

67 67

Full overlay - 0mm crank

110º Free-Swinging Hinges (Non-self-closing)

500 Series

European Hinges

www.hardwareresources.com

Application

Opening Angle

Face frame



Frameless

Mounting

Full Overlay 0mm Crank

Press-In

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

6 way

500.0141.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

Free-Swinging

Usage



110˚ Free-Swinging Hinges

110º

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Material

 Steel Certification

 200/ carton

Technovation

™

Grade 2

500 Series

110º Free-Swinging Hinges

European Hinges

(Non-self-closing)

Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

Frameless

11.2 11.2

www.hardwareresources.com

6767

Full overlay - 0mm crank

Overlay 16

5.5

7.5

8.5

11.5

14.5

Tab

4 455

B = boring distance

9.5

Fixed distance = 11

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

38.5

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

800.463.0660

11.2 11.2

38.5 38.5

6767

Frameless

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

500 Series

125º Hinges European Hinges

800.463.0660

www.hardwareresources.com

Mounting

Full Overlay 0mm Crank

Half Overlay 9mm Crank

125˚ Hinges Screw-In

500.0U85.05

Press-In

500.0U84.05

Easy-Fix

500.0U86.05

Lever-Top

500.0U94.05

500.0U99.05

Application

Opening Angle

Face frame



Frameless

125º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Full Half

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 200/ carton

Technovation

™

Grade 2

500 Series

125º Hinges European Hinges Half overlay - 9mm crank

Full inset - 15mm crank

Face frame

11.2 11.2

11.211.2

11.2 11.2

38.5 38.5

38.538.5

11.211.2

7.5

9.5

10.5

13.5

16.5

B = boring distance

Fixed distance = 12

Overlay 5

B = boring distance H 0

Reveal

20.5

Fixed distance =2 P

19 20.5 30

9.5 Tab

4 455

Overlay

800.463.0660

B = boring distance

Frameless

66 66

Frameless

67 67

Frameless

www.hardwareresources.com

66 66

67 67

Full overlay - 0mm crank

Abbreviations H

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

= Side panel width

Hinge Length

67 (66 partial)

Mounting Dimension for Frameless Application*

38.5

Cup bore depth

11.2

* Inset is “T+” (T=door thickness)

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

500 Series

170º Hinges European Hinges

www.hardwareresources.com

Our 500 Series 170° hinge is designed for residential applications and zero door gap. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It has cold rolled steel construction with nickel plating and is guaranteed to surpass all ANSI, BHMA & KCMA requirements. Clip-on base plates are available for a wide variety of frameless and face frame applications.

Mounting

Full Overlay 0mm Crank

Opening Angle

Face frame



Frameless

170º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay



170˚ Hinges Press-In

Application

6 way

500.0M73.05

800.463.0660

Boring Hole Pattern

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

Full Material

 Steel Certification

 50/ carton

Technovation

™

Grade 2

500 Series

170º Hinges European Hinges

Full overlay - 0mm crank

Thick door application

Face frame

68 68

. 11

Frameless

www.hardwareresources.com

11.2 11.2

170˚

Z=Gap 23

68 68

T = door thickness

37 37

Twin door application 19

Overlay

-8

-6

-5

-2

Fixed distance = 11

B = boring distance

170˚

Minimum reveal table

S 48

T = door thickness 9.5

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

* Inset is “T+” (T=door thickness)

= Door thickness

= Side panel width

Tab

4 455

Abbreviations

Hinge Length

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

D epth 11.2

Technovation

™

800.463.0660

11.2

11.2 11.2

105º Hinges - 500 Series

45º Corner Overlay

European Hinges

www.hardwareresources.com

Our 500 Series Corner Overlay hinge is designed for 45° inside corner and overlay cabinet applications. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It has cold rolled steel construction with nickel plating. It is recommended for use with a 0mm clip-on base plate.

Mounting

105˚ Hinges Press-In

800.463.0660

Inside Corner 18mm Crank

500.0N20.05

Application

Opening Angle

Face frame



Frameless

105º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Corner Overlay

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 100/ carton

Technovation

™

Grade 2

45º Corner Overlay

105º Hinges - 500 Series

European Hinges Inside Corner Frameless 19

www.hardwareresources.com

1.5

11.2

Reveal

100˚

H 0

-2

-1

Overlay 0

Fixed distance = -5

B = boring distance

Inside Corner 8.5

7.5

6.5

5.5

Y = Gap

B = boring distance

NOTE: Reveal based on 19(3/4") side panel

NOTE: Reveal based on 19(3/4") side panel 9.5

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

4 455

Tab

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

800.463.0660

45˚

105º Hinges - 700 Series

45º Corner Overlay

European Hinges with Built-in Soft Close

www.hardwareresources.com

Our 700 Series Corner Overlay hinge has a built-in soft close damper that brings the door to a soft and quiet close; and, is designed for 45° inside corner and overlay cabinet applications. The hinge and plate provide 6-way adjustability allowing you to dial in the exact adjustments you need. It has cold rolled steel construction with nickel plating. It is recommended for use with a 0mm clip-on base plate.

Mounting

105˚ Hinges Press-In

800.463.0660

Inside Corner 18mm Crank

700.0N20.05

Application

Opening Angle

Face frame



Frameless

105º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Corner Overlay

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 100/ carton

Technovation

™

Grade 2

45º Corner Overlay

105º Hinges - 700 Series

European Hinges with Built-in Soft Close Inside corner - 18mm crank Frameless 19

www.hardwareresources.com

1.5

11.2

Reveal

100˚

H 0

Overlay 3

B = boring distance

10.5

Fixed distance =0

Inside Corner 4

10.5

Y = Gap

B = boring distance

3.5

2.5

1.5

0.5

B = boring distance

NOTE: Reveal based on 19(3/4") side panel

9.5

Abbreviations

Hinge Length

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

4 455

Tab

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

800.463.0660

45˚

Pie Corner

105º Hinges European Hinges

www.hardwareresources.com

Our 500 Series Pie Corner hinge is designed for connecting 2 doors in a corner unit and is recommended for use with a 0mm clip-on plate. The hinge and plate provide 6-way adjustability, allowing you to dial in the exact adjustments you need. It is made of cold rolled steel construction with nickel plating. Its self-closing feature prevents the need for a magnetic catch.

Mounting

105˚ Hinges Press-In

800.463.0660

Pie Corner 0mm Crank

500.0U22.05

Application

Opening Angle

Face frame



Frameless

105º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Pie Corner

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 100/ carton

Technovation

™

Grade 2

Pie Corner

105º Hinges European Hinges

Inside corner application

Calculating door sizes The doors for a pie corner European hinge application can be of equal or unequal width. To calculate the door width (DW) of each door follow the step-by-step instructions below.

20˚

Step 2. Subtract door thickness (T) and reveal (R)

use with 165˚ or 170˚ hinge on adjacent door

Step 3. Subtract gap (G) and bumber thickness behind adjacent door

General specifications +2 / -2.5

11.2

20.5

20˚

Example: DW = (500 + 19) -19 - 3 - 1 DW = 496 mm

-2.5 / +2.5

11.2

Formula: DW = (IW +W) minus T minus R minus G

35 mm bore 12.5

W G

16-22

The cam adjustment of the pie corner European hinge allows for -2 / +2.5 mm adjustment

20.5

Adjustment

20˚

4 455

Tab

Abbreviations

9.5

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

-2 / +2.5

800.463.0660

20.5

With flat panel doors

www.hardwareresources.com

Step 1. Add the interior width to the side panel width (W)

D epth 11.2

= Door width

= Gap

= Plate height

= Interior width

= Reveal

= Door thickness

= Side panel width

Technovation

™

105º Hinges - 700 Series

90º Blind Corner

European Hinges with Built-in Soft Close Our 700 Series Blind Corner hinge has a built-in soft close damper that brings the door to a soft, quiet close, and is designed for 90° blind corner applications. The hinge and plate provide 6-way adjustability, allowing you to dial in the exact adjustments you need. It is made of cold rolled steel construction with nickel plating. It is recommended for use with a 0mm clip-on plate.

Application

www.hardwareresources.com

Frameless

Mounting

105˚ Hinges Press-in

800.463.0660

Blind Corner 0mm Crank

700.0N24.05

Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

 105º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Blind Corner

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment

Opening Angle

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 200/ carton

Technovation

™

Grade 2

90º Blind Corner

105º Hinges - 700 Series

European Hinges with Built-in Soft Close P

Blind corner Flush door application

Clearances 87

38 17

www.hardwareresources.com

11.2

24.5 22.0

B=boring distance Abbreviations

-7

Hinge Length

88.0

Mounting Dimension for Frameless Application*

20.5

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

9.5 Tab

4 455

Reveal

800.463.0660

11.2

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

105º Hinges - 500 Series

90º Blind Corner

European Hinges Our 500 Series Blind Corner hinge is designed for 90° blind corner applications, and is recommended for use with a 0mm clip-on plate. The hinge and plate provide 6-way adjustability, allowing you to dial in the exact adjustments you need. It is made of cold rolled steel construction with nickel plating.

Application

www.hardwareresources.com

Frameless

Mounting

105˚ Hinges Press-in

800.463.0660

Blind Corner 0mm Crank

500.0N24.05

Rotate front screw to increase or decreaase door overlay (-2mm).

Vertical adjustment

Depth adjustment

Rotate cam screw on mounting plate to adjust door position (-2 mm). On non-cam mounting plates, loosen screws, adjust door and retighten screws.

 105º

Usage

Finish





Residential Commerical

Nickel Plating

Adjustment

Overlay

 6 way

Blind Corner

Boring Hole Pattern

Material

Three-dimensional door adjustment Horizontal adjustment

Opening Angle

45mm

Rotate rear cam screw to adjust door position (+3mm, -2mm).

Packaging

 Steel Certification

 200/ carton

Technovation

™

Grade 2

90º Blind Corner

105º Hinges - 500 Series

European Hinges

Blind corner Flush door application

Clearances 99

40 35

www.hardwareresources.com

11.2

28.0 21.0

B=boring distance Abbreviations

-9

Hinge Length

102.0

Mounting Dimension for Frameless Application*

Cup bore depth

11.2

= Plate height

= Door protrusion

= Side arm protrusion

= Door thickness

* Inset is “T+” (T=door thickness)

= Side panel width

9.5 Tab

4 455

Reveal

800.463.0660

11.2

D epth 11.2

Subject to technical modifications without notice. Dimensions in millimeters (inch equivalents as noted)

Technovation

™

700 & 900 Series

Mounting Plates

Frameless (European) Construction Steel Non-Cam Adjustable Plates Without Screws Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8â&#x20AC;? flat head wood screws for attachment Vertical adjustment: +/- 3mm

www.hardwareresources.com

Part Number

Ctn Qty

0mm Plate

600.1233.05

200/ctn

2mm Plate

600.1234.05

200/ctn

Euro Screw Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Vertical adjustment: +/- 3mm

Part Number

Ctn Qty

0mm Plate

600.0118.05

200/ctn

2mm Plate

600.0119.05

200/ctn

Euro Screw (twin application) Used for back-to-back hinge installation in 19mm material Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 10mm shortened Euro system screws Vertical adjustment: +/- 3mm

H 32

800.463.0660

Part Number

Ctn Qty

0mm Plate

600.3118.05

200/ctn

2mm Plate

600.3119.05

200/ctn

Wood Screw with Dowels Dowels provide a stronger holding force for the hinge and plate Material: Cold rolled steel, nickel plated Preassembled with wood screws and 5mm expansion dowels Vertical adjustment: +/- 3mm

5 32

Technovation

â&#x201E;˘

Part Number

Ctn Qty

0mm Plate

600.2118.05

200/ctn

2mm Plate

600.2119.05

200/ctn

700 & 900 Series

Mounting Plates

Frameless (European) Construction Steel Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

600.0R22.05

200/ctn

2mm Plate

600.0R24.05

200/ctn

www.hardwareresources.com

Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 2mm

Euro Screw

Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam vertical adjustment: +/- 2mm

H 37

Part Number

Ctn Qty

0mm Plate

600.0P71.05

200/ctn

2mm Plate

600.0P73.05

200/ctn

Zinc Die Cast Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

600.0R23.05

200/ctn

2mm Plate

600.0R25.05

200/ctn

9mm Plate

600.0P29.05

200/ctn

800.463.0660

Heavy Duty Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 2mm

Euro Screw

Heavy Duty Material: Zinc die cast, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam vertical adjustment: +/- 2mm

Part Number

Ctn Qty

0mm Plate

600.0P72.05

200/ctn

2mm Plate

600.0P74.05

200/ctn

Technovation

™

700 & 900 Series

Mounting Plates

Face Frame Construction Steel Non-Cam Adjustable Plates Without Screws

Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Vertical adjustment: +/- 3.5mm

Part Number

Ctn Qty

0mm Plate

600.3456.65

200/ctn

3mm Plate

600.3457.65

200/ctn

Zinc Die Cast Non-Cam Adjustable Plates Without Screws (MDF application)

800.463.0660

www.hardwareresources.com

Technovation

™

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Wrap around designed for MDF/plywood face frames where 4 screws are needed to secure the plate and prevent screw pull out Vertical adjustment: +/- 3.5mm H

Part Number

Ctn Qty

3mm Plate

600.3459.65

200/ctn

700 & 900 Series

Mounting Plates

Face Frame Construction Zinc Die Cast Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

600.3553.65

200/ctn

3mm Plate

600.3554.65

200/ctn

6mm Plate

600.3555.65

200/ctn

www.hardwareresources.com

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 3.5mm

Without Screws (inset application)

B 12º

Part Number

Ctn Qty

9mm Plate

600.3458.65

200/ctn

800.463.0660

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Designed for inset applications using 9mm crank hinges Cam vertical adjustment: +/- 3.5mm

Technovation

™

500 Series

Mounting Plates

www.hardwareresources.com

Part Number

Ctn Qty

0mm Plate

400.1233.05

200/ctn

3mm Plate

400.1234.05

200/ctn

Euro Screw Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Vertical adjustment: +/- 3mm

Part Number

Ctn Qty

0mm Plate

400.0118.05

200/ctn

3mm Plate

400.0119.05

200/ctn

H 32

800.463.0660

Part Number

Ctn Qty

0mm Plate

400.3118.05

200/ctn

3mm Plate

400.3119.05

200/ctn

5 32

Technovation

â&#x201E;˘

Part Number

Ctn Qty

0mm Plate

400.2118.05

200/ctn

3mm Plate

400.2119.05

200/ctn

500 Series

Mounting Plates

Frameless (European) Construction Steel Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

400.0R22.05

200/ctn

3mm Plate

400.0R24.05

200/ctn

www.hardwareresources.com

Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 2mm

Euro Screw

Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam vertical adjustment: +/- 2mm

H 37

Part Number

Ctn Qty

0mm Plate

400.0P71.05

200/ctn

3mm Plate

400.0P73.05

200/ctn

Zinc Die Cast Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

400.0R23.05

200/ctn

3mm Plate

400.0R25.05

200/ctn

800.463.0660

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 2mm

Euro Screw

Material: Zinc die cast, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam vertical adjustment: +/- 2mm

H 37

Part Number

Ctn Qty

0mm Plate

400.0P72.05

200/ctn

3mm Plate

400.0P74.05

200/ctn

Technovation

™

500 Series

Mounting Plates

Frameless (European) Construction Zinc Die Cast Cam Adjustable Plates Euro Screw

Material: Zinc die cast, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Vertical adjustment: +/- 3mm

9mm Plate

Part Number

Ctn Qty

400.0P29.05

200/ctn

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8â&#x20AC;? flat head wood screws for attachment Vertical adjustment: +/- 3mm

18mm Plate

800.463.0660

www.hardwareresources.com

Without Screws

Technovation

â&#x201E;˘

Part Number

Ctn Qty

400.0P18.05

200/ctn

500 Series

Mounting Plates Face Frame Construction

Steel Non-Cam Adjustable Plates Without Screws

Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Vertical adjustment: +/- 3.5mm

Part Number

Ctn Qty

3mm Plate

400.3457.65

200/ctn

www.hardwareresources.com

Without Screws Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Vertical adjustment: +/- 3.5mm

Part Number

Ctn Qty

3mm Plate

400.3717.65

200/ctn

Zinc Die Cast Non-Cam Adjustable Plates Without Screws

Part Number

Ctn Qty

0mm Plate

400.3453.65

200/ctn

3mm Plate

400.3454.65

200/ctn

6mm Plate

400.3455.65

200/ctn

800.463.0660

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Vertical adjustment: +/- 3.5mm

Zinc Die Cast Cam Adjustable Plates Without Screws

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Cam vertical adjustment: +/- 3.5mm

Part Number

Ctn Qty

0mm Plate

400.3723.65

200/ctn

3mm Plate

400.3724.65

200/ctn

Technovation

™

500 Series

Mounting Plates Face Frame Construction Without Screws

Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8” flat head wood screws for attachment Vertical adjustment: +/- 3.5mm

www.hardwareresources.com

Part Number

Ctn Qty

0mm Plate

400.3713.65

200/ctn

3mm Plate

400.3714.65

200/ctn

6mm Plate

400.3715.65

200/ctn

Without Screws

Part Number

Ctn Qty

3mm Plate

400.3456.65

200/ctn

Without Screws

800.463.0660

B 12º

Technovation

™

Material: Zinc die cast, nickel plated Sold without screws Use #8 x 3/4” pan head wood screws for attachment Designed for inset applications using 9mm crank hinges Cam vertical adjustment: +/- 3.5mm H

Part Number

Ctn Qty

9mm Plate

400.3458.65

200/ctn

Technovation

â&#x201E;˘

800.463.0660

www.hardwareresources.com

Institutional Hinges 5 Knuckle Overlay Hinge 3/4”

www.hardwareresources.com

SIDE PANEL

»»

Conforms to ANSI/BHMA Grade 1 Requirements

»»

Precise and consistent tooling

»»

Hospital tips, 2-3/4” overall height

»»

Drilled knuckle inner diameter

»»

32mm system hole pattern with 37mm setback

»»

Countersunk screw holes for recommended #8 flat head or Euro screws

»»

Slotted screw holes for vertical and horizontal adjustment

»»

Stainless steel #8 x 3/4” flathead screw available (8X347‑2)

7/16”

13/16"

11/16”

Side Panel

13/16” (20.6mm)

Hinge Overlay

23/32” (18.3mm)

Door Overlay

15/32” (11.9mm)

Reveal Opening Angle

Finish

Part Number

Ctn Qty

Almond Powder Coat

HR0076AL

108pc/box

Black Powder Coat

HR0076BLK

108pc/box

Dull Chrome (26D)

HR0076

108pc/box

Polished Brass

HR0076PB

108pc/box

Stainless Steel (304)

HR0076SS

108pc/box

White Powder Coat

HR0076WH

108pc/box

Technovation

™

3/4” (19mm)

Door Thickness

Material Thickness

Bulk Pack

800.463.0660

DOOR

9/32” (7.1mm) 0.095” (2.4mm) 270˚

Institutional Hinges Single Pivot Hinge 3/4"

»»

Solid zinc die cast construction

»»

For full overlay applications – 2 dimensional adjustment

»»

Hinge and plate ship pre-assembled

»»

Cup ships with 8mm dowels

»»

Integrated polymer catch with positive lock

»»

Conforms to ANSI/BHMA Grade 1 Requirements

www.hardwareresources.com

SIDE PANEL

13/16”

DOOR

Side Panel Door Thickness

Finish

Part Number

Ctn Qty

Nickel

HR0086

100pc/box

Hinge Overlay Door Overlay Reveal Opening Angle

3/4” - 13/16” (19-21mm) 3/4” (19mm) 19/32” (15mm) 9/32” (7.1mm) 270˚

Cup Bore

Ø 35mm x 13mm depth

Dowels

45mm Centers x Ø 8mm

800.463.0660

Bulk Pack

3/4” (19mm)

Technovation

™

800.463.0660 • fax 318.742.9513 • www.HardwareResources.com