Hydro
Tab
Marine Engineering The revolutionary trim system
Designed to operate ‌
HYDROTAB TRIM SYSTEM
Patented
Standard Series
Indicative Sizing Table The following table is indicative and it differs depending on the boat type. It is always recommended to choose the biggest Hydrotab model that can be fitted on your boat.
300 - 450
Boat
Heavy Duty Series
500F - 600F - 800F -1000F
Hydrotab Series Standard Heavy Duty
15-22
300
-
22-34
450
500
32-42
-
600-800
40-53
-
800-1000
50-70
-
1000
Maximum operating speed 50 knots
Note: The boat owner is exclusively responsible for the right selection of the interceptor model.
Hydro
Tab
Marine Engineering
N.Triantafyllis Ltd 4 Papazoglou str, GR 177 78 Athens, Greece TEL.: +30 210 48 36 343,5,6 FAX: +30 210 48 36 342
E-mail: info@hydrotab.gr
www.hydrotab.gr
HYDROTAB TRIM SYSTEM
Hydro
Tab Designed to operate … The hydrotab trim system was designed bearing in mind the demanding and harsh conditions that the sea presents. Its design is characterized by simplicity and reliability so that it will operate when you need it. The system is a revolutionary idea which can replace the classic trim tab system with the hydraulic cylinder and the vertical electronic systems The hydrotab trim system is a robust 316 steel construction which is supplied from the existing fresh water circuit of the boat ( 2-3 bar ). No additional pump unit installation is required . Volumetric control ensures trimming accuracy The total absence of any type of seals ensures longevity combined with low cost maintenance of the product. Its unique design allows self cleaning (fouling deposits flushing out) using the water flow during boat movement.
Advantages
Less drag than normal systems, saves fuel, enhancing millage
It creates no effect in steering when the boat reverses
Increased planning speed range due to the optimum angle of the hull
Sock resistance during repetitive boat jumping. Automatically retracts when the engine switches off or on
Immediate response - accurate operation It operates with the existing fresh water circuit supply of the
boat ( 1-3 bar ) and no other additional installation is required Easy and fast installation Ecological . Operates with fresh water, no oil presence in the system No need of maintenance Self-cleaning anti fouling system Robust 316 steel construction
Thanks to its innovative patented technology it creates a high shifting force that can easily break off any fouling created on its external surfaces, while it remains clean inside due to the dark environment.
HYDROTAB TRIM SYSTEM
Hydro
Tab
Simplicity – reliability The new patented technology of the hydrotab system is characterized by extreme simplicity. Absence of complex internal parts ensures low failure risk. The motion transfer is achieved through an extremely robust flexible tube which moves directly the trimming blade with the retraction achieved by a set of powerfull springs. The inflation is achieved by the fresh water circuit pressure of the boat This simple way guarrantees a trouble free operation in the demanding sea environment while high shifting forces remove any created fouling.
High shifting forces Simple installation using the existing sweet water circuit
No sealing allows flushing during boat movement
Controller Position indication. Ergonomic design Day & Night function.
Our company retains the right to change the information of the present catalogue without further notice.
HYDROTAB TRIM SYSTEM
Hydro
Tab
Standard Series 300 - 450 Patented
Standard series products are available in F and V type
V type
5 Ye a r s Wa r r a n t y
F type V and F defines the inlet of fresh water.
Heavy Duty Series 500F - 600F - 800F -1000F Patented
Heavy duty series products are only available in F type.
5 Ye a r s Wa r r a n t y
HYDROTAB TRIM SYSTEM
Hydro
Tab
Technical data Standard Series Dimensions (mm) B C A
Weight (kg)
Operating Recycling Pressure (bar) Water Volume (lit)
Force (kgr)
Model F V
Material
300 450
INOX 316
4,8
302
110
82
2- 2,5
0,35
386
INOX 316
6,5
453
110
82
2- 2,5
0,57
638
Dimensions (mm) B C A
Operating Pressure (bar)
Recycling Water Volume
Force (kgr)
116
103
2- 2,5
0,75
728
Heavy Duty Series Model
500F 600F 800F 1000F
Weight (kg)
Material
INOX 316
12
INOX 316
13,8
613,5 116
103
2- 2,5
0,97
944
INOX 316
18
817,5
116
103
2- 2,5
1.38
1.338
INOX 316
22,5
1017,5 116
103
2- 2,5
1.79
1.672
500
C
A
B
The hydrotab kit
5
1
The kit consisted of :
2
3
4
1
Two hydrotab interceptors
2
Valve kit with built in connection fittings 12 or 24 VDC
3
Operator control panel with position indicator ( 9-30V DC )
4
Connection tubing
5
Drilling patterns and screws
Second controller is optional
Hydro
Tab
Custom Products Hydrotab’s unique design and technology offers you the possibility to develop a custom size product that fullfill the specific needs of your boat.
HYDROTAB TRIM SYSTEM
Hydro
Tab
mini
HYDROTAB TRIM SYSTEM
Hydrotab mini suitable for tenders The hydrotab mini is a manually operated system designed for ribs and semi- planning boats. Robust design Ergonomic and accurate control Combines all the hydrotab advantages with a smaller cost
Hydrotab Supporting Equipment For better promotion of Hydrotab products was created the Hydrotab Stand with intergrated motion circuit for live presentation. The stand is available with heavy duty as well as standard series products. 0,12 m
2,21 m
0,90 m
0,65 m