SILO DURAGAL
速
SILO
SILVER FOR THE PRICE OF STEEL
DuraGal ® Silo Section is the new standard for grain silo
4. Lightweight, easy to handle
construction. Its unique profile is designed to perfectly
5. Cost savings – practically eliminates the cost incurred
conform to the contour of grain silos and can be used in
by shot-blasting, cleaning & painting after fabrication
place of RHS in silo base ring sections and support legs. What sets DuraGal® Silo Section apart from painted silo
6. Easy to cut, weld, drill, paint or powder coat 7. Consistent quality and dimensional tolerances
sections is its “in-line” zinc coating. This means you get all the benefits that DuraGal® products are famous for, at virtually no extra cost. When combined with galvanized sheeting DuraGal® Silo Section gives you a fully galvanized Silo that requires very low maintenance compared with a painted alternative.
7 DuraGal® Benefits 1. Corrosive resistant, in-line, hot-dip, galvanized coating 2. Hi-tensile product - complies with both C350L0 and C450L0 requirements 3. Up to 28% more strength at no extra cost
Mass & Bundling Data
DURGAL® SILO SECTION DuraGal® C350L0 & C450L0 to AS1163 Size d mm
b mm
75
64
Designated Thickness t mm
Mass per Metre
Metres per Tonne
kg/m
m/t
2.3 3.0 4.0
4.41 5.71 7.52
227 175 133
No. of Lengths per Pack
36 36 24
Mass per Pack
Width
Height
t
Total Metres per Pack m
mm
mm
1.27 1.64 1.44
288 288 192
351 351 351
381 384 256
FOR MORE INFORMATION CONTACT
OneSteel Direct 39-45 Flagstaff Road Port Kembla NSW 2505 Locked Bag 8825 South Coast Mail Centre NSW 2521 Telephone: 1800 065 415 Facsimile: 1800 800 744 Email: onesteeldirect@one.com Website: www.onesteel.com
Mark Taylor, Cricket Legend/1999 Australian of the Year AUSTRALIAN QUALITY AWARD 1991 WINNER AUSTRALIAN MADE
This publication has been prepared by OneSteel Market Mills, (Tubemakers of Australia Limited ABN 50 007 519 646). Please note that the specifications and technical data are subject to change without notice and to ensure accuracy users of this publication are requested to check the information to satisfy themselves and not to rely on the information without first doing so. Unless required by law the company cannot accept any responsibility for any loss, damage or consequence resulting from the use of this publication. Photographs shown are representative only of typical applications, current at February 2001. This brochure is not an offer to trade and shall not form any part of the trading terms in any transaction. Issue 1 February 2001 ©Copyright 2001. Tubemakers of Australia Limited ABN 50 007 519 646 — Registered Trademarks: DuraGal®; Family of DuraGal Products®, DualGrade®