GENUINE AUTOMATION
About Us
We are a technology driven company providing scalable automation, control and energy management solutions through Research, Development and Innovation.
Whether you’re looking to better manage your assets, measure & manage plant-wide energy usage or upgrade your existing control system, Genuine Automation is here to help.
Since our founding in 2009, we’ve continued to grow and advance the field of energy management.
We’ve now completed more than 100 installations in India, and we’re ready to leverage all that experience in delivering a next control solution for you.
We’re here whether you need help on a single project or a long-term partnership.
We offer following Engineered solutions;
a) Energy Management, Measurement Systems & Solutions b) Transformer, Furnace & Flow Asset Management Systems c) Motor & Pump Control Systems d) Sensor and Automation products e) Safety Control Systems
Sensors for Critical Control
Sensors on field side are the most critical element of an Industrial Control System.
Those are expected to perform in seamless manner with minimum or no tolerable downtime.
Implementing redundancy on sensor or field device side is a challenge.
We understand this need more than anybody else.
We do not mass manufacture sensors. Rather, we Engineer those to fit your application and installation specification.
Meeting the application as well as Installation needs is the single most important criteria driving this decision.
Motor Protection Relays
Induction Motor runs the machines in the industries.
To protect this work-horse, we offer a wide range of Motor Protection Relays which are easy to install & offer following protections
Single Phasing
Phase Reversal
Phase Imbalance
Over-Load
Earth Fault
Locked Rotor
Dry Run
Short Circuit.
Energy Management and Measurement Sy
Does your Energy Consumption hurt you? With cost of electrical energy going up every passing day you will have an obviously easy answer for this question.
Per capita demand of electrical energy in India is rising at exponentially high rate and in 2008 it stood at 566 kWh as compared to 276 kWh in 1990 and 402 kWh in the year 2000 as per World Bank Report.
According to Central Electricity Authority’s data, the Indian power utilities have been able to add generation capacity of only about 47.78 per cent of the targetted addition in last 4 years at 32,512 MW (between April, 2007 to January, 2011). This is dismal picture.
Instruments for Critical Measureme
The range of Digital Multimeters, Oscilloscopes and Dielectric Test Instruments we offer are chosen to provide best in class and accuracy of measurement to the end user.
The Digital Multimeters we provide are precise, accurate and ruggedized for rough Industrial use which is not the case many of the conventional Digital Multimeters.
Automatic Blocking system is the most defining specification which prevents unintended misuse like measuring AC voltage with Resistance range selected.
The automatic blocking system simply will not allow the selection to be made.
Vibratory Rod Type Point Level Senso
Vibrating Rod Sensor provides reliable point level sensing in a wide variety of applications within powder and bulk solids markets.
The vibrating probe principle utilized overcomes typical application difficulties associated with changes in material, electrical dielectric constant, temperature or humidity while providing reliable, solid state electronic circuitry, which requires no calibration.
It has ability to detect a wide range of material densities.
Features:
Single-Probe Vibrating Rod Design
Used for Wide Range of Powders and Other Bulk Solids
Easy Setup – No Calibration
Universal Power Supply.
Ultrasonic Level Sensor ď‚—
The Ultrasonic level sensors of the Series SW 3051 are very useful for sensing high levels (up to 20 meters.) of liquids or slurry material.
ď‚—
The sensor gives a 4-20 mA output signal to the controller and operates relays at preset high and low levels.
ď‚—
Probes are available for sensing water levels of 5/10/15/20 meters.
Rotary Paddle Bin Monitor
Rotary Paddle Bin Monitors consists of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials.
These easy to install units are proven performers in a wide variety of bulk materials.
These paddle units can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of conveyors and pneumatic lines or provide any of a number of level control functions.
Unlike many other available paddle units, Paddle level indicators incorporate a feature that automatically shuts off the motor of the unit when the paddle is in a stalled position.
RF Point Level Sensor Disk Type
The RF Point Level Sensor is a most rugged and proven sensor for monitoring level in a chute.
This is very useful for monitoring chute blockage.
It is a special heavy duty disk / flange mounted probe.
The probe senses only the steady level of coal lumps and does not actuate due to falling material dust or humidity.
The effect of cable capacitance and drift with temperature is eliminated by using a driven shield arrangement.
The controller unit operates an output relay when the coal level reaches near the sensor face.
The probes are available for working temp.
RF Capacitance Point Level Sensors
RF capacitance sensors offer cost-effective, reliable point level monitoring and provide with the most affordable solution for your applications.
These RF capacitance probes are designed to provide a high level of sensitivity, stability and durability for powder and bulk solids applications, as well as liquid and slurry applications and are backed by two years warranty.
Features:
Superior Sensitivity of 0.5pF is standard
Maximum Reliability and Calibration Stability
Automatic Material Build – Up Immunity
Universal Power Supply Available
Liquid and Slurry Applications.
Diaphragm Type Bin Monitor
Diaphragm Type Bin Monitor offers economical, reliable and durable point level controls for point level detection of dry bulk materials.
The units can be used to eliminate bin overflow, maintain a pre-determined material level, indicate plugging of chutes or conveyors or provide any of a number of level control function.
Features:
Economical, Reliable and Durable Point Level Detection
Low Profile Mounting
Multiple Diaphragm Materials
Over-Pressure Protection
Ultra-Sensitive Switch Option.
Contact Us
GENUINE AUTOMATION Contact Mobile Web:
Person: Mr. Ganesh Dalvi
No: +91 9767206262 www.cloudsol.co.in
Address: Area: City:
36-37 Sai Dham Commercial Center,
Landewadi,Bhosari Pune - 411039