Catálogo DAP Audio 2011-2012 by OpenAV

Table of Contents Inde In dexx de

DAP 100V

DMT Media Gear Displays & Screens AV Hard & Software AV Accessories

6 - 20 21 - 25 26 - 31

DMT AV Hardware Stands & Brackets AV Bags & Cases Stands & Brackets

32 - 36 37 + 40 38 - 39

DMT AV Adapters BNC Adapters Scart Adapters VGA/HDMI/DVI Adapters

41 41 41

DMT AV Cables AV Prefabcables AV Cables on Spool

41 - 43 44 - 46

100V Amplifiers Conference Systems 100V Hornspeakers Megaphones 100V Speakers 100V Accessories Overview

146 - 151 152 - 153 154 - 157 157 158 - 166 166 167

DAP Hardware Speakercomponents Speakerstands Speakerstand Accessories Microphonestands Mic.stand-Accessories Stand Miscellaneous Gear Racks 19 inch Hardware Flightcase Hardware Gear & Rack Lights

168 - 169 170 - 172 173 174 - 178 179 180 - 183 184 - 187 188 - 191 192 - 193 193 - 194

DAP Bags & Cases DAP Gear DJ Mixers Install Mixers Live Mixers CD Players Memory cards & sticks Audioprocessing Microphones Headphones Amplifiers Portable Soundsystems

48 - 51 52 - 54 55 - 59 60 - 70 70 71 - 78 79 - 92 93 94 - 101 102 - 103

DAP Recording Studio-Microphones Interfaces Studio-monitors Interior & Acoustics Accessories

104 - 106 107 - 108 109 110 111

DAP Speakers Entry Level Series Mobile Road Series Multifunctional Series High Grade Series Touring Series Install Series

2 00_00_Intro_10_temp2011.indd 2

112 - 113 114 - 123 124 - 125 126 - 135 136 - 141 142 - 145

Index

Roady & Tool Bags Protection Bags Standbags/19â&#x20AC;? Rackbags ABS Cases Roadcases Rackcases Stackcases

195 - 197 198 - 199 200 201 - 204 205 - 226 227 - 231 232 - 233

DAP Audio Adapters XLR - XLR Adpaters XLR - Jack Adapters XLR - RCA Adapters 3p. - 5p. DMX Adapters Miscellaneous Adapters Chassis Adapters Transformer Adapters Speakeradapters XCaliber XLR - XLR Adapters XCaliber XLR - Jack Adapters XCaliber XLR - RCA Adapters XCaliber Miscellaneous Adapters Neutrik Adapters

234 234 234 234 235 235 235 - 236 236 237 - 238 238 239 239 - 241 241

[Table of Contents] 04.03.11 21:18

Table of Contents Inde In dexx de

DAP Audio Connectors Neutrik Connectors / Chassis Jack Connectors / Chassis XLR Connectors / Chassis Speakercomponents / Chassis RCA / Cinch Connectors

Showtec Deco & Designlight 241 - 242 243 244 245 245

DAP Prefab Cables DAP Tools & Testers Prefab Speakercables Prefab Mic. / Linecables Prefab Line / Instrumentcables Prefab Guitarcables Prefab Patchcables Prefab Midi Cables 8-way Studiosnakes PC Interface Cables Prefab Power / Signal Cables

246 247 - 249 250 - 252 252 - 254 254 255 - 256 257 258 259 260 - 261

LED Tubes LED Colorpaint Bars LED Colorpaint Spots LED Panels & Shapes LED Starskies Flexilight Powersupplies Mirrorballs

282 - 283 284 - 295 296 - 297 298 - 301 302 - 305 306 - 319 320 - 321 322 - 323

Showtec Lighteffects Lighteffects Scanners Movingheads

324 - 347 348 - 351 352 - 391

Showtec Strobes & Blacklights DAP Multicore Stage & Multisnakes Stagewheels Empty Wheels & Boxes Multicore Accessories Multicore Cable Multicore Connectors How to connect

262 - 264 265 266 - 267 267 268 - 269 270 271

272 - 273 273 273 274 - 275 275 276 - 279

DAP Merchandise DAP Fan Gear

392 - 393 393 - 394 395

Showtec Lasereffects Lasereffect analog Lasereffect DMX Lasersoftware & Accessories

396 - 397 398 - 404 405

Showtec Parcans

DAP Cables On Spool Mic./Line Cables Line Instrument Cables Powermulticore Video Cables 75 Ohm Cat.-Cables Speakercables

Analog Strobes & Controllers DMX Strobes & Controllers Blacklights

280

Parcan 16 Parcan 20 Parcan 30 Parcan 36 Parcan 38 Parcan 46 Parcan 56 Parcan 64 Studiobeams Parcan Specials

406 407 407 408 - 409 410 410 411 - 412 413 - 415 416 - 418 419 - 429

Showtec Coloursheets & Caps Colorsheets Colorcaps

Index 00_00_Intro_10_temp2011.indd 3

[Table of Contents]

430 431

3 04.03.11 21:18

00_01_DMT_10_temp2011.indd 47

04.03.11 21:44

DJ Mixers Gea earr

DS-CM-4 D2180

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 3 outputs • 45 mm faders • Cross fader • Master output with equalizer • Headphone with split function • LED indicators for Master signal

Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs: Master: Record: Headphone: Tone control master output: Indicators: Fader start: Dimensions: Weight:

AC 230V 15W 8 line, 2 phono, 2 mic Cinch unbalanced Combo jack/XLR balanced 1 master, 1 record, 1 headphone Cinch unbalanced Cinch unbalanced Jack 6,3 mm Stereo 60, 250, 1K, 4K, 12K LED indicators for Master Jack chassis 19” x 182 x 105 mm (LxWxH) 3,83 kg

Oxygen D2150

7 Channel multi-purpose DJ-Mixer

• 4 x 100 mm stereo fader with switch for 1 mic- and 2 line-inputs • 3 x 100 mm stereo fader with switch for 1 mic-, 1 line- and 1 phono-input • 2 x 100 mm Stereo Master fader with stereo/mono switch • 1 x stereo monitor (BOOTH) rotary • All channels with Hi-, Mid-, Low-control and send/return (effect) function • Headphone output with Master/Pre-fade Listening control • Effect control

48 01_02_DAP_Gear_10_temp2011.indd 48

DJ Mixers

[Gear] 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-6 D2181

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 5 outputs • Fader start • 45 mm faders • Assignable cross fader • Manual and Auto Talk over function • Master output with equalizer • Headphone with split function • Led indicators for Master signal

Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs:

AC 230V 20W 8 line, 3 phono, 2 mic cinch unbalanced combo jack/XLR balanced 2 master, 1 booth, 1 record, 1 headphone Master: XLR balanced and cinch unbalanced Booth: cinch unbalanced Record: cinch unbalanced Headphone: jack 6,3 mm Stereo Tone control master output: 60, 250, 1K, 4K, 12K Indicators: LED indicators for Master DJ-light: BNC 12V/5 Watt Fader start: Jack chassis Dimensions: 19” x 178 x 105 mm (LxWxH) Weight: 3,83 kg

Technical Information Input/Output Impedance and sensitivity: Microphone: 3 mV, 6.8 K Ohm, +48V Phantom Powered Line: 150 mV, 22 K Ohm Phono: 2 mV, 47 K Ohm, 1000 Hz Rec Out: 775 mV nom, 1000 Ohm Master 1+2 Out (XLR): Headphones:

775 mV nom, 8.5 V max., 100 Ohm Unbalanced, 50 Ohm 2x 750 mW in 32 Ohm

Frequency response: Microphone/Line: Phono:

15 35.000 Hz, -3 dB 15 70.000 Hz, -3 dB

Output noisefloor at nominal settings: Microphone/Line: -76 dBu Phono: -71 dBu

Each channel with: • 3 inputs (mic. line/phono) • Gain control • Balance control and PFL-switch •

Effect/PFL switch + control

• • • •

Master 1 Stereo/Mono switch Master 2 Stereo/Mono switch Switch VU meter on: Master-1, Master-2, Pre-fade

•

Monitor-output control

•

Headphone control with PFL/Master-1 switch

Tone Control Line / Phono / Mic: Low: -18 dB, +18 dB at 30 Hz Mid: -12 dB, +12 dB at 1200 Hz High: -12 dB, +12 dB at 20.000 Hz Dimensions (LxWxH):

483 x 110 (128 mm incl. knobs) x 356 mm

DJ Mixers 01_02_DAP_Gear_10_temp2011.indd 49

[Gear]

49 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-8 D2182

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 5 outputs • Assignable crossfader • Low, Mid, High tone control for each channel • LED indicators for Master and PFL signal • USB connection

50 01_02_DAP_Gear_10_temp2011.indd 50

Technical Information Power Supply: AC 230 V- 50 Hz Power consumption: 15,5 W Inputs: 7 line, 4 phono, 2 mic Line, Phono: cinch unbalanced Mic: combo jack/XLR balanced Outputs: 2 master, 1 booth, 1 record, 1 headphone Master: XLR balanced and cinch unbalanced Booth: cinch unbalanced Record: cinch unbalanced Headphone: jack 6,3 mm Stereo Channel control: Gain, Low. Mid, High Indicators: LED indicators for Master and PFL Dimensions: 19” x 185 x 105 mm (LxWxH) Weight: 3,9 kg

DS-CM-10 D2183

Clubmixer

• Adjustable crossfader • Gain,low,mid,high, pan control for each channel • Talk-over function • Headphone with split function • Zone output with low and high frequency control

DJ Mixers

Technical information: Power supply: AC 115/230V - 50/60 Hz Power consumption: 50W Inputs: 4 line (RCA), 2 phono (RCA), 3 AUX (RCA), 2 mic (combo jack) inputsignal: line 10KOhm/-14dB, AUX 47KOhm/-14dB, Phono 47KOhm/-14dB Outputs: Master (XLR balanced / RCA), zone (RCA), record (RCA), phone (jack) SN ratio: >90dB Frequency response: 20-20 kHz Indicators: 10 segment LED each channel and master Dimensions: 483 x 177 x 100 mm (LxWxH) Weight: 3,4 kg

[Gear] 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-12MP3 D2184

Clubmixer with MP3 player

• Adjustable crossfader • Gain,low,mid,high, pan control for each channel • Talk-over function • Headphone with split function • Zone output • SD card reader with pitch control, loop, folder search Technical information: Power supply: Power consumption: Inputs: inputsignal: Outputs: SN ratio: Frequency response: SD card: Indicators: Dimensions: Weight:

AC 115/230V - 50/60 Hz 50W 4 line (RCA), 2 phono (RCA), 3 AUX (RCA), 2 mic (combo jack) line 10 kOhm/-14dB, AUX 47kOhm/-14dB, Phono 47kOhm/-14dB Master (XLR balanced / RCA), zone (RCA), record (RCA), phone (jack) >90dB 20-20kHz Max. 4 GB 10 segment LED indicator for master 483 x 177 x 100 mm (LxWxH) 3,4 kg

DJ Mixers 01_02_DAP_Gear_10_temp2011.indd 51

[Gear]

51 04.03.11 21:56

Install Mixers Gea earr

EM-51 D2160

Installation mixer

10 line inputs 2 phono inputs 2 mic inputs 3 Master outputs (2 with tone control) 1 rec output Adjustable talk over function Technical Information Power supply: AC 230V - 50Hz Power consumption: 1A Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Master: XLR balanced, cinch unbalanced Rec: cinch unbalanced Headphone: Stereo jack, 300mV

Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

20Hz - 20kHz <0,03% > 45dB mic 70dB, phono 60dB, line 78dB 483 x 100 x 89 mm (LxWxH) 4,10 kg

EM-7.2 Installation Mixer

D2161 Multifunctional compact installation mixer

• 10 line inputs • 2 phono inputs • 2 mic inputs • 3 Master outputs • 2 Master outputs with low,mid and high frequency control • Adjustable talk over function • Headphone with adjustable split function • External power supply • Rec. out (with switch for mic on/off) Technical Information Power supply: AC 230V - 50Hz Power consumption: 1A Inputs: 10 line, 2phono, 2 mic Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Outputs: 3 masters, 1 rec, 1 headphone Masters 1 & 2: cinch, XLR balanced, 0,75/1,5V Master 3: cinch, 0,75V

52 01_02_DAP_Gear_10_temp2011.indd 52

Rec: Headphone: Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

cinch unbalanced, 0,75V stereo jack, 300mV 20Hz - 20kHz < 0,03% > 45dB mic 70dB, Phono 60dB, Line 78dB 483 x 100 x 89 (LxWxH) 4,20 kg

Install Mixers

[Gear] 04.03.11 21:56

Install Mixers Gea earr

EM-7.3 Installation Mixer D2162

• • • • • • • • •

Multifunctional compact zone mixer

10 line inputs 2 phono inputs 2 mic inputs 3 separate selectable outputs (zones) Master outputs with low,mid and high frequency control Adjustable talk over function Headphone with adjustable split function External power supply Selectable record mode for each zone

Technical Information Power supply: AC 230V - 50 Hz Power consumption: 1A Inputs: 10 line, 2phono, 2 mic Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Outputs: 3 zones, 1 rec, 1 headphone Zones: cinch, XLR balanced, 0,75/1,5V

Rec: Headphone: Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

cinch unbalanced, 0,75V stereo jack, 300mV 20Hz - 20kHz < 0,03% > 45dB mic 70dB, Phono 60dB, Line 78dB 483 x 100 x 89 (LxWxH) 4,30 kg

Install Mixers 01_02_DAP_Gear_10_temp2011.indd 53

[Gear]

53 04.03.11 21:56

Install Mixers Gea earr

IM-53 Installation Mixer D2178

Multifunctional Zone Mixer • 9 inputs • 3 separate selectable outputs (zones) for each channel • Master outputs with low, mid and high frequency control • LED indicators for each output zone • Use 1HE blindpanel to create extra space for connections (D7801) Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs: Master: Headphone: Tone control master output: Indicators: Dimensions: Weight:

AC 230V-50Hz 15W 6 line, 2 phono, 1 mic cinch unbalanced combo jack/XLR balanced 3 Separate Zones XLR balanced and cinch unbalanced jack 6,3 mm Stereo Low. Mid, High 11 segment LED indicators for Master and PFL 19” x 132 x 177 mm (LxWxH) 3,85 kg

54 01_02_DAP_Gear_10_temp2011.indd 54

Install Mixers

[Gear] 04.03.11 21:56

Live Mixers Gea earr

GIG-6 D2260

NEW PRODUCT

6 Channel Live Mixer

Special features: • USB PC/MAC audio interface • Aux / FX sends on each channel • Ultra low noise mic preamps • 16 Reverb echo DSP presets

The DAP GIG-6 is an 6 channel compact versatile mixer with 16 build-in DSP echo reverb presets. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It is an ideal mixer for small venues where ultimate perfomance and advanced features are needed. Technical Information Input channels: 2 x Mic balanced 2 x Line mono 2 x Line stereo 1 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x 1/4” Jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 1 x Aux send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack USB Port: Audio in- & output interface for PC & MAC Input inmpedance: Mic inputs, 4,6K Ohm Line inputs, 20K Ohm Stereo inputs, > 10K Ohm Aux stereo return, > 10K Ohm CD/Tape stereo input, 10K Ohm Gain control:

T.H.D.: S/N: Frequency Resp.: Crosstalk:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) >80 dB

Output levels:

20 dB

Channel EQ:

Low, 80Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 12KHz +/- 15 dB

Phantom power:

+ 48 V

Power supply: AC 15 V Power consumption: 8 Watt Measurements: 50 x 235 x 242 mm Weight: 1,3 Kg

Mono channels 30 dB Stereo channels 10 dB Aux & FX 10 dB

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 55

[Gear]

55 04.03.11 21:56

Live Mixers Gea earr

Special cial features: • USB PC/MAC audio interface • Aux / FX sends on each channel • Ultraa low noise mic preamps • 16 Reverb everb echo DSP presets

GIG-8 D2261

NEW PRODUCT

8 Channel Live Mixer

The DAP GIG-8 is an 8 channel compact versatile mixer with 16 build-in DSP echo reverb presets. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It is an ideal mixer for small venues where ultimate perfomance and advanced features are needed. Technical Information Input channels: 4 x Mic balanced 4 x Line mono 2 x Line stereo 1 x Aux stereo return 1 x CD/Tape stereo input Output channels:

USB Port: Input inmpedance:

Ohm Gain control:

56 01_02_DAP_Gear_10_temp2011.indd 56

Live Mixers

1 x Main Stereo out by 2x 1/4” Jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 1 x Aux stereo send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack Audio in- & output interface for PC & MAC Mic inputs, 4,6K Ohm Line inputs, 20K Ohm Stereo inputs, > 10K Ohm Aux stereo return, > 10K Ohm CD/Tape stereo input, 10K

T.H.D.: S/N: Frequency Resp.: Crosstalk: Output levels:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) > 80dB 20 dB

Channel EQ:

Low, 80Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 12KHz +/- 15 dB

Phantom power:

+ 48 V

Power supply: Power consumption: Measurements: Weight:

AC 15 V 8 Watt 50 x 290 x 242 mm 1,6 Kg

Mono channels 30 dB Stereo channels 10 dB Aux & FX 10 dB

[Gear] 04.03.11 21:56

Live Mixers Gea earr

Special features: • USB PC/MAC audio interface • 16 Adjustable effects • Pre/post Aux- & FX sends for each channel • Separate sub outputs

GIG-12 D2262

NEW PRODUCT

12 Channel Live Mixer

The DAP GIG-12 is a 12 channel mixer with 16 controllable DSP effects. It is a very complete 2 bus mixer with all functionality you need to make a perfect audio mix. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts and low cut on the mono channels and selectable pre post aux send. The stereo output is equipped with a contour function that will give your main mix extra body and a nice high presence. Main Features: • USB connectivity • Inserts on mono channels • Stereo & Sub routing switches • PFL switches • 80Hz low cut switches on all channels • 16 controllable DSP effects • Channel signal & clipping leds • 3-band channel EQ • Pre/Post Aux & FX sends on each channel • 48 V Phantom power Technical Information Input channel: 6 x Mic balanced 4 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 2 x Sub mono out by 2 x 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 2 x Aux send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack USB Port: Audio in- & output interface for PC & MAC Input inmpedance: Mic inputs, 2,8K Ohm Line inputs, 20K Ohm Stereo inputs, 10K Ohm Aux stereo return, 10K Ohm CD/Tape stereo input, 10K Ohm

Gain control:

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

T.H.D:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) S/N: > 90 dB Frequency Resp.: 20Hz - 30 Khz (+/-1dB) Crosstalk: >80 dB Output levels: >22 dB Channel EQ: Low Cut:

Low, 100Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 10KHz +/- 15 dB 80 Hz 18dB

Phantom power:

+ 48 V

Power supply: AC 100- 240V 50Hz/60Hz Power consumption: 25 Watt Measurements: 86 x 315 x 383 mm Weight: 3,9 Kg

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 57

[Gear]

57 04.03.11 21:56

Live Mixers Gea earr

NEW PRODUCT

Speciall features: • USB PC/MAC /MAC audio interface • 16 Adjustable stable effects • Pre/postt Aux- & FX sends for each channel • Separate rate bus outputs

GIG-16 D2263

16 Channel Live Mixer

The DAP GIG-16 is a 16 channel mixer with 16 controllable DSP effects. It is a very complete 4 bus mixer with all functionality you need to make a perfect audio mix. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts on the mono channels, a low cut on all channels and selectable pre post aux sends. The stereo output is equipped with a contour function that will give your main mix extra body and high presence. Main Features: • USB connectivity • Inserts on all mono channels • Stereo & Sub routing switches • PFL switches • 80Hz low cut switches on all channels • 16 controllable DSP effects • Channel signal & clipping leds • 3-band channel EQ • Pre/Post Aux & FX sends on each channel • 48 V Phantom power Technical Information Input channel: 10 x Mic balanced 8 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 2 x Sub mono out by 2 x 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 2 x Aux stereo send by 1 x 1/4” Jack unbalanced 1 x Rec stereo output by RCA unbalanced 1 x Phones stereo by 1 x 1/4” Jack unbalanced USB Port: Audio in- & output interface for PC & MAC

T.H.D.: S/N: Frequency Resp.: Crosstalk: Output levels: Channel EQ:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) >80 dB >22 dB

Low Cut:

Low, 100Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 10KHz +/- 15 dB 80 Hz 18dB

Phantom power:

+ 48 V

Power supply: AC 100- 240V 50Hz/60Hz Power consumption: 25 Watt Measurements: 86 x 418 x 383 mm Weight: 4,4 Kg

Input impedance: Mic inputs, 2,8K Ohm Line inputs, 20K Ohm Stereo inputs, 10K Ohm Aux stereo return, 10K Ohm CD/Tape stereo input, 10K Ohm Gain control:

58 01_02_DAP_Gear_10_temp2011.indd 58

Live Mixers

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

[Gear] 04.03.11 21:56

Live Mixers Gea earr

NEW PRODUCT

Special features: •USB PC/MAC audio interface •Tape input can be routed to AUX 1 or AUX 2 •Mono output with variable low pass filter •Tape in- output with RCA and mini jack

GIG-24 D2264

24 Channel Live Mixer

The DAP GIG-24 is a 24 channel mixer with all features you need to connect a complete band and all necessary signal processing gear. It has very low noise, high quality mic preamps. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts & low cut switches on the mono channels and four aux sends on all channels. All mono channels have three-band EQ´s with a selectable mid frequency, the stereo channels have 4-band EQ´s. Main Features: • USB connectivity • low noise high quality mic preamps • Mono channels with inserts and phantom power • Stereo channels with 4-band EQ • Mono channels with 3-band EQ with mid sweep • 18dB/Oct 75 Hz low cut on mono channels • 48 V Phantom power

Technical Information Input channels:

20 x Mic balanced 16 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input by RCA and mini jack 20 x insertion by 1/4” jack

Stereo return 10K Ohm TAPE input, 10 KOhm Gain Control:

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

T.H.D.: S/N: Crosstalk: Frequency Responce:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB > 80dB 20Hz - 30 Khz (+ /-1dB)

USB Port:

1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 1 x mono out by XLR and 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 4 x Aux send by 2 x XLR and 2 x 1/4” Jack 1 x Rec stereo output by RCA & mini jack 1 x Phones stereo by 1 x 1/4” Jack Audio in- & output interface for PC & MAC

Channel EQ:

LED indications: Channel faders: Channel controls: Metering: Low pass filter on mono output:

Mute / Peak / Signal / PFL 60 mm PFL, Mute, Pan, Aux 1-4, EQ, Gain, Low Cut, PAD 2 bars with 11 segments 60-160H, 12dB/Oct

Low Cut: Phantom power: Lamp connector:

Low: 80Hz +/- 15 dB Mid sweep: 100Hz -8Khz +/- 15 dB High: 12KHz +/- 15 dB 75Hz 18dB/oct + 48 V XLR chasis 12V DC

Impedance:

Mic inputs, 2.8K Ohm Line inputs, 20K Ohm

Power supply: Power consumption: Measurements: Weight:

AC 100- 240V 50Hz/60Hz 25 Watt 78 x 418 x 383 mm 4,4 Kga

Output channels:

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 59

[Gear]

59 04.03.11 21:56

CD Players Gea earr

DS-200K D1131

Professional Karaoke DVD Player

The DS-200K is the latest and most sophisticated Karaoke DVD player in the DAP range. It combines a full functional DVD player with Karaoke functionality with a clear and bright 7”LCD display which makes it very easy to select the right track or to monitor the status of the picture. The DS-200K has two built in microphone inputs, built in reverb and tone control. For full functionality it is also equipped with both SD-card and USB slot to play your MP3 files. The DS-200K is a versatile DVD player, suitable for the most demanding applications.

60 01_02_DAP_Gear_10_temp2011.indd 60

Technical Information • Compatible with CD, CD-R, CD-RW, MP-3, DVD, • 100-240V Multivoltage powersupply • Professional USB and SD Card player with key control • 7” TFT display • LCD display with blue backlight • 2 microphone inputs • Headphone output • Karaoke function • Digital Output • Composite Output • S/N Ratio: 65dB • Frequency response: 20Hz-20kHz • Dimensions (LxWxH): 482 x 135 x 132 (19” 3U) • Wireless remote included

CD Players

[Gear] 04.03.11 21:56

CD Players Gea earr

DS-185K D1127

1 U Karaoke DVD player

• LCD display with blue backlight • Full control remote control unit • Variable delay effect unit • 2 Adjustable mic inputs The DS-185K supports the following formats: dvd-video, cd, hdcd, dtscd vcd, s-vcd, mpeg4, picture cd, cd-r/rw, MP3, wma,AC3

Technical Information Power supply: Power consumption: Video signal: S/N ratio: Audio output: Video output: Video/picture: Audio: Frequency response: Mic input: Audio output: Remote batteries: Dimensions: Weight:

AC 115/240 - 50/60 Hz 25 Watt NTSC/PAL >92dB 2.0 V p-p 1.0 V p-p MPEG1, MPEG2 MPEG1, MPEG2, Dolby Digital, DTS, Analog 20Hz - 20 kHz XLR balanced, Jack unbalanced stereo RCA unbalanced AAA 2x 1,5V 482 x 56 x 260 mm (LxWxH) 4 kg

CD Players 01_02_DAP_Gear_10_temp2011.indd 61

[Gear]

61 04.03.11 21:57

CD Players Gea earr

12cm 12c m or or 8cm 8cm dis discs cs

DS-610 D1128

1U CD/USB/MP3 Player

• Large LCD display for all information • Anti-shock memory Technical Information Power supply: Power consumption: Disc type: Pitch control: S/N-ratio: Frequency response: Headphones: Audio Line output: Audio Rec output: Dimension: Weight: Batteries of remote:

AC 108-260V - 50/60 Hz 5Watt Standard compact discs (12 cm or 8 cm ) +/- 24% >96 dB 20 - 20 kHz 6,3 mm jack Stereo RCA, Unbalanced Stereo RCA, Unbalanced 482 x 45 x 260 mm (LxWxH) 2,75 kg AAA, 2x 1,5V

62 01_02_DAP_Gear_10_temp2011.indd 62

CD Players

[Gear] 04.03.11 21:57

CD Players Gea earr

DS-860S

DS-860D

• Professional 19 inch 2U CD player • Anti-shock memory • Remote control • Program mode (20 tracks) • Continuous and Single play mode • Large Jog wheel • Auto cue • Seamless loop

• Professional Twin CD Player • Anti-shock memory • Program mode (20 tracks) • Continuous and Single play mode • Large jog wheel • Auto cue • Seamless loop

D1170

Single CD Player

Technical Information Power Supply: AC 110/230 Volt – 50/60 Hz Power consumption: 20 W Frequency response: 20 Hz – 20 kHz Signal/noise ratio: 96 dB Pitch control: +/- 12% Time display: Remain, total remain, elapsed Sampling frequency: 44,1 kHz DA converter: 24 Bit Harmonic distortion: 0,003% Dimensions: 19” x 270 mm x 2U (LxWxH) Weight: 2,6 kg

D1180

Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Dimensions main unit: Dimensions control unit: Weight:

CD Players 01_02_DAP_Gear_10_temp2011.indd 63

Double CD Player

[Gear]

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 96 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 270 mm x 2U (LxWxH) 19” x 70 mm x 2U (LxWxH) 3,0 kg

63 04.03.11 21:57

CD Players Gea earr

• Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB)

DS-880DMP3

DS-2680DMP3

• Professional Twin CD Player • Anti-shock memory • Program mode (20 tracks) • Compatible with: CD, CD-RW, MP3, CD-R • Continuous and Single play mode • Large jog wheel • Auto cue • Seamless loop

• Professional Twin CD Player • Anti-shock memory • Compatible with: CD, CD-RW, MP3, CD-R • Slot in disc loading system • Program mode (20 tracks) • Continuous and Single play mode • Large jog wheel • Direct access buttons for track numbers • Auto cue • Seamless loop • USB + SD input

D1181

Double CD Player with MP3

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 96 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 270 x 2U mm (LxWxH) 19” x 70 x 2U mm (LxWxH) 3,0 kg

64 01_02_DAP_Gear_10_temp2011.indd 64

D1184

Double CD Player with direct access, MP3 and slot in

CD Players

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 85 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 260 mm x 2U (LxWxH) 19” x 65 mm x 3U (LxWxH) 5,9 kg

[Gear] 04.03.11 21:57

CD Players Gea earr

• Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB) • Optional flightcase: D7590B

DS-CDJ-250 MKII D1226

DS-380TL MP3 D1190

Frontloading Table Top with MP3

Professional Table top CD Player with Anti-shock memory. Compatible with CD, CD-RW, MP3, CD-R. This unit is equipped with USB input and Slot in disc loading system. Furthermore, there is a Program mode (20 tracks), Continuous and Single play mode, a large jog wheel with display, direct access buttons for track numbers, Auto cue, Seamless loop, Folder search and track search. Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Dimensions: Weight:

AC 110/230 Volt – 50/60 Hz 25 W 20 Hz – 20 kHz 88 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 1 Bit 0,01% 280 x 320 x 100 mm (LxWxH) 3,4 kg

• Twin CD player with anti shock • Large Jog wheel with display • Direct access buttons for fast control • Program mode (20 tracks) • Continuous and Single play mode • Seamless loop • 3 Channel mixer with 5 extra inputs • Mixer with low, mid, high tone control • 60 mm Crossfader • USB input • SD-card Reader (max 4 GB) • Folder search, track search Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Signal inputs: Input connector: Signal outputs: Output connector: Dimensions: Weight:

CD Players 01_02_DAP_Gear_10_temp2011.indd 65

DJ workstation

[Gear]

AC 110/230 Volt – 50/60 Hz 80W 20 Hz – 20 kHz 85 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 2 x phono, 2 x line, 1 x mic Cinch, XLR 1 master, 1 record, 1 headphone Master: XLR male balanced, Cinch Record: Cinch Headphone: Stereo jack 483 x 260 x 133 mm (LxWxH) 11 kg

65 04.03.11 21:57

CD Players Gea earr

DS-MP-150 D1230

MP3 Midi Player Desk (incl Virtual DJ LE)

The DS-MP-150 is a true midi controller to control your PC like a common audio device. Just connect the DS-MP-150 with USB to your computer or laptop and you will be able to fully control your music-files. Delivery is complete with the award winning Virtual DJ software which is user friendly and quick to learn. Mixing has never been easier as with the DS-MP-150.

Technical Information • Touch Jog Wheel • USB interface • 3 selectable Jog Modes (Pitch, Search, Scratch) • Adjustable cross-fader • Plug & Play functionality • Including Virtual DJ LE software • Dimensions (LxWxH): 360 x 260 x 50 mm

66 01_02_DAP_Gear_10_temp2011.indd 66

CD Players

[Gear] 04.03.11 21:57

CD Players Gea earr

DS-MP-170 D1232

MP3 Midi Player Desk (incl.Virtual DJ LE)

The DS-MP-170 is the extended version of the DS-MP-150. It has the same functionality as DS-MP-150 but is equipped with an USB audio interface that enables you to connect the controller directly to an audio system or active speaker. It also has extra functions such as headphone output and an external line-input to connect an conventional audio source such as a CD player.

Technical information: • • • • • • • • • •

Touch Jog Wheel USB audio interface 3 selectable Jog Modes (Pitch, Search, Scratch) Adjustable cross-fader Plug & Play functionality Including Virtual DJ LE software Line Input Headphone output. Balanced master output. Dimensions (LxWxH): 360 x 260 x 50 mm

CD Players 01_02_DAP_Gear_10_temp2011.indd 67

[Gear]

67 04.03.11 21:57

CD Players Gea earr

DS-UMP1 D1129

Technical Information Power supply: Power consumption: Pitch control: S/N ratio: Frequency response: Headphone connector: Micro connector:

Universal Media ia player

• Player for SD, MMC and USB mp3 • Max capacity: 4 GB • Large LCD display

DS-200MP3 D1231

MP3 Player Rackmount

The Darkshade DS-200MP3 is a fully digital media player. It can read both SD-card and USBstick and can play any MP3 song you want. The DS-200MP3 has both foldersearch and tracksearch. The big bright LCD display makes selecting songs very easy and fast. Seamless Loop, Pitch control and the big jog shuttle make the DS-200MP3 a versatile and easy to use MP player suitable for the modern and demanding DJ. • Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB)

68 01_02_DAP_Gear_10_temp2011.indd 68

AC 80-260V - 50/60 Hz 5 watt 24% +/>96 dB 20 Hz - 20 kHz 6,3 mm jack XLR 3 pole balanced

Audio output: Stereo XLR balanced, Stereo RCA unbalanced Dimensions: 482 x 45 x 260 mm (LxWxH) Weight: 2,4 kg Remote control batteries: AAA 2x 1,5V

Technical Information Professional Twin MP Player Continuous and Single Play Mode Folder Search Track Search Large Jog Wheel Auto Cue Seamless Loop Power Supply: Power Consumption: Frequency response: Signal noise ratio: Pitch control: USB and SD card reader Dimensions: Weight:

CD Players

AC 80-240V 20W 20Hz - 20kHz 85dB +/- 12% 19” 3U / 482 x 80 x 135 mm 2,5 kg

[Gear] 04.03.11 21:57

CD Players Gea earr

CD-110 D1250

• • • • •

1U Professional CD/MP3 Player

CD player Slot in CD running gear Anti shock memory Program mode, Random mode USB input

Technical Information Power Supply: AC 230V – 50-60 Hz Power consumption: 50 Watt CD unit: Slot in, with Anti shock memory CD type: CD/CDR/CDR-W/MP-3 Output: RCA , stereo Output level: 1,2 V +/- 2 dB

Technical Information Power Supply: AC 230V – 50/60 Hz Power consumption: 50 Watt CD unit: Anti shock memory CD type: CD/CDR/MP-3 Output: RCA,stereo Output level: 1,2 V +/- 2 dB Separation: 60dB at 1 kHz THD: < 0,1% at 1 kHz S/N Ratio: > 70dB at 1 kHz

Separation: THD: S/N Ratio: Dimensions: Weight:

60dB at 1 kHz < 0,1% at 1 kHz > 70dB at 1 kHz 482 x 44 x 250 mm (LxWxH) 3,4 kg

Tuner unit:

AM (522 -1620 kHz) /FM tuner (87,5 – 108 MHz) 75 Ohm Antenna terminal socket RCA,stereo 482 x 44 x 250 mm (LxWxH) 3,6 kg

Antenna: Output: Dimensions: Weight:

TCD-100 D1251

• • • • • • • •

CD Players 01_02_DAP_Gear_10_temp2011.indd 69

1U CD/MP3 Player + Tuner

CD player Slot in CD running gear Anti shock memory Program mode, Random mode USB input AM/FM Tuner 20 preset memory’s Auto scanning, Manual scanning

[Gear]

69 04.03.11 21:57

CD Players Gea earr

DMP-100 D1252

Technical Information Power supply: AC 230V - 50 Hz Power consumption: 50 Watt Input: USB memory stick, SD/MMC card slot RCA stereo audio signal Output: USB memory stick, SD/MMC card slot RCA stereo audio signal

1U MP3 Recorder

Digital audio system SD, MMC card, USB MP3 compatible.

Technical Information Power supply: Power consumption: Input: THD: S/N Ratio: Separation: Output level: Mac record input: Dimensions: Weight: Accessories:

AC 230V - 50 Hz 50 Watt USB memory stick, SD/MMC card slot, CD, RCA stereo audio signal 1kHz, <0,3% > 60 dB > 60 dB 1kHz / o dB = 1,2V +/- 2 dB 800mV 482 x 250 x 44 mm 3,1 kg Remote control

THD: 1kHz, < 0,3% S/N Ratio: > 60dB Separation: > 60dB Output level: 1 kHz/ 0 dB = 1,2V +/-2dB Max. record input signal: 800mA Dimensions: 482 x 250 x 44 mm (LxWxH) Weight: 3,1 kg

CDR-110 D1253

CD/USB Recorder

The DAP CDR-110 combines a CD player with a USB/SD MP-3 player/recorder in only 1U. A must have for each effect-rack, but also very suitable to be built into fixed installations. Please note that due to the USB/SD card functionality the record button always has a 3 sec delay as it needs to search the right source. For easy operation the CDR-110 comes including IR remote control. A clear and bright display shows you the status of the unit and track.

Memory cards & sticks USB Stick

SD-Card D1280 D1281 D1282

2GB 4GB 8GB

70 01_02_DAP_Gear_10_temp2011.indd 70

D1290 D1291 D1292

CD Players

2GB 4GB 8GB

[Gear] 04.03.11 21:57

Audioprocessing Gea earr

ACU-2 D1931

Professional Audio Connector

The DAP ACU-2 is a professional connection unit with 2 x XLR line-in, 2x XLR line-out and Speakon speaker-connectors for Low, Mid/High and bi-amping operation. At the backside of the ACU youâ&#x20AC;&#x2122;ll also find a 230V power outlet for the connection of a powersplitter. Technical information: Length speaker cable: Length power cable: Length signal cable: Dimensions:

1.5m 1.5m 0.6m 19 inch x 1U 483 x 70 x 45 mm (LxWxH) Weight: 1,5 kg Power connector not included

DB Display D1902

Technical information:

Decibel Power Display

DAP stage cubes make a complete series of audio tools for use by professionals. They provide functions like amplifying, mixing, monitoring, adjusting, interconnecting and patching. Build in a firm metal housing they are stage-proof while, due to their small footprint they can also be used in any environment where space is critical.

Dimensions: Weight:

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 71

483 x 45 mm (LxH) 0,94 kg

[Gear]

71 04.03.11 21:57

Audioprocessing Gea earr

EQ-3231F D1923

Technical information:

Graphical Eq. 2 x 31 band/3U with feedback frequency

With feedback frequency display!

Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/Reduce of the freq.: Dynamic range: Input gain: Indicator:

Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

EQ-3231 D1922

Graphical Eq. 2 x 31 band/3U

Technical information: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

72 01_02_DAP_Gear_10_temp2011.indd 72

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0,01% 2 step filter < +/- 1.5%) Variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Low Cut Filter, Clip Output, By Pass, Feedback Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 200 Ohm / Unbalanced 100 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 133 mm (LxWxH) 3 kgaa

Audioprocessing

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) Variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Low Cut Filter, Clip Output, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 200 Ohm / Unbalanced 100 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 133 mm (LxWxH) 4,7 kg

[Gear] 04.03.11 21:57

Audioprocessing Gea earr

Technical information: Model: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/ reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

DAP Audio EQ-2215 AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) 45 Hz Low Cut +/- 15d B 118 dB - ~+6 dB Power, Output VU, Clip Output, Low Cut, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 300 Ohm / Unbalanced 150 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 89 mm (LxWxH) 4 kgaa

Technical information: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the Central frequency: Filter of input: The max. increase/ Reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Clip Output, Low Cut Filter, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 300 Ohm / Unbalanced 150 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 89 mm (LxWxH) 3 kgaa

EQ-2215 D1920

Graphical Eq. 2 x 15 band/2U

For the more demanding audio-professional we offer the DAP-Graphical Equalizers. A range of 4 graphical equalizers with a wide range of use: live-artists, DJâ&#x20AC;&#x2122;s and fixed installations.

EQ-2231 D1921

Graphical Eq. 2 x 31 band/2U

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 73

[Gear]

73 04.03.11 21:57

Audioprocessing Gea earr Special features: • DAP speaker presets available at www. dap-audio.info • 48 Khz, 32Bits Sample rate • 5 parametric filters per input and output • USB interface with included user-friendly software • Engineered and assembled in Europe

DSM-26 D2070

NEW PRODUCT

Digital Speaker Manager Pro

The DSM-26 is a 2 in- and 6 output speaker manager that can be used for a wide range of applications. It has all dynamics you need to tune many different types of speaker set-ups. At the front it has an USB connection port which enables you to program the DSM-26 with the included software. The RS485 interface gives you the possibility to connect and program multiple units at once. It has a powerful chipset that makes it possible to use all filter slopes until 48 dB per octave and all equalizer, delay sections without running out of memory or calculations. The DSM-26 is suitable for professional PA systems, line arrays and audio installations, as well as sound distribution networks. Check out all features and specifications online at www.dap-audio.info. Technical information: DSP: Sample rate:

48 kHz, 64 bits NXP (Philips) DSP

5-Bands Input EQ: EQ Selections: EQ Frequency Selection:

Allpass, Bell, High Shelf, Low Shelf, Notch 20 to 20,000 Hz in 1 Hz steps on all EQ’s

Delay: Output delay:

Channel independent from 0 to 8 mS

5-Bands Output EQ: EQ Selections: Type:

same as input Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12

Crossovers: Types: Slopes: Crossover frequencies:

Linkwitz Riley, Bessel and Butterworth 6, 12, 18, 24 dB/octave 20 to 20,000 in 1 Hz octave steps

Limiter: Threshold points: Attack time: Release times:

-20 to +20 dBu in 0.5 dB steps Zero Attack Time Limiter 1 = shortest, 100 = endless long, in steps of 1.

Miscellaneous: Memory Storage: 50 User presets Mute: All Output channels can be individually muted Display: 2 x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back Accessories: Power adapter, USB cable, DSP software Full specification and features at productsheet on www.dap-audio.info

74 01_02_DAP_Gear_10_temp2011.indd 74

Audioprocessing

[Gear] 04.03.11 21:57

NEW PRODUCT

DCP-26 D2081

Digital Cross Over 2-in, 6-out

The DCP-26 is a very complete 2 in- 6 output digital speaker manager. Even if you are not an audio engineer you can easily setup this unit with the included software that works by the USB interface. It has 5 PEQ’s at the in- and outputs and various types of filters to manage any kind of speaker or speaker system. Furthermore it has all features you need like phase reverse, limiters and delays. Clear in and output meters in combination with the LCD display gives you all the necessary information in one overview. Our engineers will keep working on presets for the DAP speaker ranges to help you getting a good start of settings for your personal DAP audio system. Those presets can be downloaded at www.dap-audio.info or ask your local dealer. The DCP-26 is suitable for PA, line arrays and audio installations, as well as sound distribution networks. Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s Delay: Output delay: mS

Channel independent from 0 to 8

5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12 Crossovers: Types:

Linkwitz Riley, Bessel and Butterworth Slopes: 6, 12, 18, 24 dB/octave Crossover frequencies: 20 to 20,000 in 1 Hz octave steps

Limiter: Threshold points: -20 to +20 dBu in 0.5 dB steps Attack time: Zero Attack Time Limiter Release times: 1 = shortest, 100 = endless long, in steps of 1. Miscellaneous: Memory Storage: 50 User presets Mute: All Output channels can be individually muted Display: 2 x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back Accessories: Power adapter, USB cable, DSP software Full specification and features at productsheet on www.dap-audio.info

Special features: • DAP speaker presets available at www. dap-audio.info • 48 Khz, 32Bits Sample rate • 5 parametric filters per input and output • USB interface with included user-friendly software • Engineered and assembled in Europe Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s Delay: Output delay: Channel independent from 0 to 8 mS 5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12 Crossovers: Types: Linkwitz Riley, Bessel and Butterworth Slopes: 6, 12, 18, 24 dB/octave Crossover frequencies: 20 to 20,000 in 1 Hz octave steps

DCP-24 D2080

Digital Cross Over 2-in, 4-out

The DCP-24 is the little brother of the DCP-26 which has exact the same features but has four outputs instead of six. If you have a stereo sub top combination and want to get the maximum power out of your audio system without the risk of any damage this is the unit that gets the job done. Fully digital with all features you need to tune and protect your sound system. If you are not familiar with speaker processors our DAP engineers will help you with standard presets for our dap speaker ranges. Ask your dealer or download them at www.dap-audio.info load them in your DCP-24 memory by USB and you are good to go.

Full specification and features at productsheet on www.dap-audio.info

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 75

[Gear]

75 04.03.11 21:58

Audioprocessing Gea earr Special features: • Presets are available at www.dap-audio. info • 48 Khz, 64Bits Sample rate • USB interface with included user-friendly software • Engineered and assembled in Europe • User adjustable EQ and HI / Low pass filters

DCL-22 D2082

Digital Compressor / Limiter

NEW PRODUCT

The DCL-22 is a digital two way compressor limiter with lots of extra features and can be used for a wide range of applications. The main function is the compressor, however most people are not common with compression it actually is very easy to use. Although it decreases the dynamics of your signal it gives the impression of a more powerful sound. If you have compressed your signal, you are able to boost the gain and get more power out of a voice or for example a sound system. The DCL-22 can compress EQ filter and limit your signal, so it also can be used as protection for your sound system.

Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP, 5-Bands Input EQ EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s 5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12

Mute:

Outputs channels can be individu ally muted Display: 2x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back accessories: Poweradapter, USB cable, Software

Hi and Low-Pass Filters: Types: Linkwitz Riley, Bessel and But terworth Slopes: 6, 12, 18, 24 dB/octave Filter frequencies:20 to 20,000 in 1 Hz octave steps Compressor/Limiter: Threshold points: -20 to +20 dBu in 0.5 dB steps Compression Ratio: 1.1 to Endless Attack time: 1 to 100 mS Hold time: 1 to 1000 mS Release times: 10 to 10,000 mS Miscellaneous: Memory Storage:

NEW PRODUCT

50 User presets

ADI-200 Active direct box D1943 Frequency Response: 10Hz-40KHz Noise Level: < -105db Distortion (THD): < 0.005% at 1khz, 0dbu output Inputs: XLR & 1/4” Jack unbalanced Link out: 1/4” Jack unbalanced Output: XLR balanced Power supply: 9V Battery or 18 - 48V DC (phantom) Input Impedance: >250KΩ Load Impedance: >600 Ω Dimensions: 55 x 135 x 145mm (HxWxD) Weight: 0,65 Kg

ADI-100 Active Direct Inject Box

PDI-100 Passive Direct Inject Box

D1942 Dimensions: Weight:

D1941 Dimensions: Weight:

(LxWxH) 160 x 130 x 65 mm 0,8 kg

76 01_02_DAP_Gear_10_temp2011.indd 76

Audioprocessing

(LxWxH) 160 x 130 x 65 mm 0,7 kg

[Gear] 04.03.11 21:58

Audioprocessing Gea earr SC-1 Personal monitor mix-amplifier

SC-2 4 channel passive mixer

D1501 Max. Input: Output impedance: Gain: Bandwidth: S/N Ratio: Power: Dimensions: Weight:

D1502 Input Impedance: Output Impedance: Gain: Dimensions: Weight:

20 dB Mic, 40 dB Mon. 10 Ohm 20 dB 1/4”, 50 dB XLR 50 Hz - 20 kHz 90 dB 9-18 VAC/DC, 9-24 VDC 113 x 73 x 40 mm (LxWxH) 0,249 kg

47 kOhm 12 kOhm -12 dB 95 x 73 x 40 mm (LxWxH) 0,321 kg

SC-3 3 channel active mini mixer

SC-4 3 channel professional mic/line mixer

D1503 Front Panel: LEVEL 1 - 3:

D1504 Input Impedance: Output Impedance: THD + Noise (distortion): Freq. response:

Volume Controls adjusts the amount of input signal to the indicated channel. Master Level: Master volume control, adjusts the amount of overall signal sent to the Main Right and Left outputs. Headphone level: Adjusts the amount of signal sent to the Headphone Output. PAN 1 - 3: varies the relative amount of right and left signal from the channel to the mix-bus. Phone outs: Two 1/4” TRS Stereo jacks for connection to stereo headphones. Rear Panel: CH 1 - CH 3: inputs 1/4” unbalanced inputs. The right input is the MONO input. Right & Left.

MAIN OUTPUTS: 2 1/4” unbalanced outputs containing the three mixed stereo signals.

Max. Output Level: Max. Input Level: Max. Gain: low-cut: Current-Draw: Phantom Power: Connectors: XLR, 1 1/4” TRS, DC: Dimensions: Weight:

600 Ohm XLR 600 Ohm, 1/4” 0.02% 25 Hz - 16 kHz (=0/-3 dB) + 14 dB - 14 dB + 60 dB 100 Hz 20 mA + 18 VDC 3 XLR (female), 1 (male) Power jack 143 x 93 x 45 mm (LxWxH) 0,553 kg

SC-5 MiniMix Mic/Line mixer

SC-11 Headphone amplifier one channel

D1505 Ch1 Max. Gain: Ch2 Max. Gain: Ch1 Input Impedance: Ch2 Input Impedance: Output Impedance: Power: Dimensions: Weight:

D1511 Input Impedance: Max. Input Level: Input Connectors: Outputs: Max. Gain: S/N Ratio: THD: IMD (SMPTE) Dimensions: Weight:

32 dB 20 dB 10 kOhm 20 kOhm 50 Ohm 12VDC 100 mA (typical) 113 x 73 x 40 mm (LxWxH) 0,45 kg

100 kOhm (unbalanced) +14 dBV Stereo 1/4” TRS phone (4) 1/4” Stereo 1/4” 20 dB/Channel > 90 dB < 0.008% < 0.008% 113 x 73 x 40 mm (LxWxH) 0,336 kg

SC-12 Microphone splitter combiner

SC-13 Two Way stereo converter

D1512 Input impedance: Output impedance: Dimensions: Weight:

D1513 Max. Out: Balanced: Unbalanced: Max. In: Balanced: Unbalanced: Noise Floor: THD: Gain: +4 In:

600 600 Ohm 95 x 73 x 40 mm (LxWxH) 0,305 kg

Dimensions: Weight:

+18 dB +12 dB +22 dB +22 dB -88 dB 0.003% -8 dB -10 In: +20 dB 143 x 93 x 45 mm (LxWxH) 0,527 kg

SC-14 Mini microphone pre-amplifier

SC-15 Phono RIAA equalized pre-amplifier

D1514 Input Impedance:

D1515 Display: 1/O Connectors: Power: Dimensions: Weight:

Max. Input Level: Max. Gain: Phase Shift: EIN: THD: IMD (SMPTE): Power: Dimensions: Weight:

10 kOhm balanced, unbalanced +4 dB V XLR balanced, +10 dB V unbalanced 50 dB XLR, 44 dB 1/4” <10° 20 Hz - 20 kHz 109 dB max. < 0.01% < 0.01% 12 VDC adapter 113 x 73 x 40 mm (LxWxH) 0,349 kg

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 77

1 Power (LED) RCA 1/4” TRS Stereo 12-18 VDC 95 x 73 x 40 mm (LxWxH) 0,289 kg

[Gear]

77 04.03.11 21:58

Audioprocessing Gea earr SC-16 Signal switching device

SC-17 Sine/Square

D1516 Dimensions: Weight:

D1517 Sine wave out Square wave out Frequency adjustment Sine level adjustment Output pad

95 x 73 x 40 mm (LxWxH) 0,29 kg

SC-18 Stereo Di-box/Hum Eliminator

SC-19 Speaker Checker

D1518 Stereo passive DI-box (2 x IN/2 x OUT) Impedance: 600 Ohm

D1519 Battery operated Output connection for XLR and Speaker connector Volume and Frequency control Frequency Range: 20-20.000 Hz

SC-21 Phantom power supply one channel

SC-22 Phantom powered DI box

D1521 Number of channels: Regulated Output Voltage: Short Circuit Current: Residual Output Noise: Freq. response: AC Input:

D1522 Input Level: Output level:

External Power Supply: Jack: Dimensions:

1 48V 2V DC 14 mA -71 dB V 10 Hz - 25 kHz 120V AC, 60 Hz, 2W MAX. 230V AC, 50 Hz, 2W MAX. UL and CSA approved AC power Module with 1,8 m cable. Male and Female XLR jack 74 x 45 x 130 mm (LxWxH)

Bandwidth: S/N-Ratio: Jack: Controls: Power: Dimensions: Weight:

-10 to + 40 dB unbalanced -10 to + 2 dB balanced (XLR) male (Pin 2+) 1 Hz - 50 kHz 100 dB (2) 1/4â&#x20AC;? Phone, (I) XLR (male) attenuated switch, ground lift switch 9-48 VDC Phantom 95 x 73 x 40 mm (LxWxH) 0,29 kg

SC-23 Passive DI box

StageCube 24 Hum Eliminator XLR

D1523 Frequency range: Inputs:

D1524 Input: Output: Dimensions: Weight:

Outputs: Dimensions: Weight:

15 Hz - 30 kHz +/- 0 dB 50 kilo-Ohm 6,3 mm jacks; unbalanced XLR; balanced 600 Ohm 6.3 mm jacks; unbalanced XLR; balanced 74 x 45 x 130 mm (LxWxH) 0,65 kg

78 01_02_DAP_Gear_10_temp2011.indd 78

Audioprocessing

XLR 3 pole female XLR 3 pole male 115 x 75 x 40 mm (LxWxH) 200g

[Gear] 04.03.11 21:58

Microphones Gea earr

PL-08

PL-08S

PL-08ß

The DAP PL-08 is a cardioid dynamic microphone for professional vocal use. The rugged construction with steel mesh grill is roadproof and therefore, the PL-08 is suitable for live performance, outdoor/indoor singing, speech and studio recording.

The DAP PL-08S is the same mic as the PL08. The only difference is the ON/OFF switch, therefore it’s an ideal choice for conference and DJ-use.

The DAP PL-08ß is a supercardioid dynamic microphone, specially designed for for professional vocal use, speech and studio recording and the supercardioid pattern insures a high gain before disturbing feedback.

Cable included!

D1303

Vocal Dynamic Microphone

Technical information: Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Vocal/all-round

D1305

Technical information: Dynamic, moving coil. 50 to 16.500 Hz Cardioid 1,8 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,315 kg

Mic. Grill for PL-07ß & PL-06 D1311

D1304

Microphone grill

Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, Moving coil. 50 to 16.500 Hz Cardioid 1,8 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,298 kg

Mic. Grill for PL-08 series D1312

Fits on D1303 & D1304

PL-07ß

D1302 Instrument/Vocal Dynamic Microphone

The dynamic cartridge of the DAP PL-07ß with supercardioid polar pattern insures a high gain before disturbing feedback and is specially designed for lead vocals and instruments as Guitar Amp, Bass Amps, Acoustic Guitars, Saxophones, Snares, Toms, Congas and Woodwinds.

Cable included!

Technical information:

Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz):

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. 50 to 16.000 Hz Cardioid 2,9 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,28 kg

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. 50 to 16,000 Hz Cardioid 2,6 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 42 mm x L 160 mm 0,271 kg

DWS-56 D1317

Microphones 01_02_DAP_Gear_10_temp2011.indd 79

Vocal Dynamic Microphone

Microphone windscreen set

[Gear]

79 04.03.11 21:58

Microphones Gea earr

MS-1 Microphone set

MS-2 Microphone set

The MS-1 Microphoneset is a complete and ready to use set. It includes a PM-11 microphone, Microphone stand, clamp and an 6m XLR male to XLR female microphone cable. A very affordable set which is ideal for schools, musicians and mobile DJ’s.

The MS-2 Microphone set is a complete and ready to use set. The MS-2 set includes a PM-12 microphone with an on/off switch, that’s the main difference with the MS-1 set that doesn’t have a on/off switch on the microphone. The MS-2 microphone set includes all necessary accessories you need for a vocal microphone like the microphone stand, clamp and an 6m XLR male to XLR female microphone cable. It is a very affordable set which is ideal for schools, musicians and mobile DJ’s.

D1345

PM-11, Stand and Cable

PM-12, Stand and Cable

Technical information:

Technical information: Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

D1346

Moving Coil Dynamic Hyper-Cardioid 50Hz - 15 kHz -53dB+/-3dB 600 Ohm (at 1 kHz)

80 01_02_DAP_Gear_10_temp2011.indd 80

Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

Microphones

Moving Coil Dynamic Hyper-Cardioid 50Hz - 15 kHz -53dB+/-3dB 600 Ohm (at 1 kHz)

[Gear] 04.03.11 21:58

Microphones Gea earr

PDM-12

PDM-17

The DAP PDM-12 is universal dynamic microphone which is suitable for use in schools, mobile DJ’s and small clubs. It offers an excellent price perfomance ratio and is reliable in use. The PDM-12 has an on/off switch and comes complete with 6m microphone cables (XLR to XLR).

The DAP PDM-17 is universal dynamic microphone which is suitable for use in schools, mobile DJ’s and small clubs. It offers an excellent price perfomance ratio and is reliable in use. The PDM-17 has a loackable on/off switch and comes complete with 6m microphone cables (XLR to XLR).

D1347

Dynamic Vocal Microphone

D1348

Dynamic Vocal Microphone

CM-50

D1322 Vocal/Instrument Back Electret Condenser Microphone

The DAP microphone CM-50 is an extremely rugged supercardioid back electret condenser microphone for professional lead/backup vocal use in live performance with built-intwo stage anti-pop filter which reduces wind and breathing noise. Due to its concept it is an excellent choice for vocals on stage, studio recording and mid-high frequency instrument miking. Cable and adapter inclusive!

Technical information:

Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz):

Moving Coil Dynamic Hyper-Cardioid 50Hz-15kHz -53dB +/- 3dB 600 Ohm (at 1 kHz)

Max. SPL: Impedance: Power supply: Connector: Accessories: Net. Weight:

Back Electret Condenser Super Cardioid 50~16000 Hz 4,5 mv/Pa* (*1 Pa = 94 dB SPL) 140 dB (THD ≤ 1% 1000 Hz) 200 Ohm 48V Phantom 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Stand mount with 5/8 treat 1 storage case 0,21 kg

Cable included!

Microphones 01_02_DAP_Gear_10_temp2011.indd 81

[Gear]

81 04.03.11 21:58

Microphones Gea earr VM-60 D1381

NEW PRODUCT

60’s Vintage Mic

The VM-60 is a dynamic microphone with the performance and looks straight out of the ‘50s and ‘60s. It´s a vocal microphone and has a moving coil with a cardioid pattern. When you use the VM-60 mic you will experience the sound of the 60’s again.

Technical information: Type: Frequ response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power sypply: Connector: Dimensions: Weigh: On / Off swich:

Dynamic, moving coil 40 Hz - 18 KHz Cardioid -52dB (0dB=1V/Pa 1000Hz) 137dB 300 Ohm +/- 30% Not required 3 Pole XLR 190 x 75 x 75 mm (HxWxD) 1Kg Yes

Special features: • 60’s sound character

HM-30

Blues-harp/Harmonica Microphone D1380

The DAP HM-30 is a successor of the legendary crystal-type microphones used for blues-harp. With the latest microphone technology and very fine machining, we present a very cute microphone that will help you steal the show.

ECLM-70 D1418

phone

Professional Instrument Micro-

Outstanding for saxophone, brass and woodwind instruments. • Extended frequency response and wide dynamic range for pure and natural sound delivery. • Good flexible gooseneck and adjustable axis ensure a precise positioning of the microphone • Clamp with elastic grip for secure mic.mounting without damaging the instrument. • Windscreen to prevent pop noise effectively. • A mini-XLR-connector for use with the belt-packs from the eclipse range.

82 01_02_DAP_Gear_10_temp2011.indd 82

Microphones

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Dynamic, moving coil 40 Hz - 16 kHz (-3 dB) cardioid 1,2 mV/Pa -58 dB 140 dB 220 Ohm none 3p. XLR male type 276 g 57 mm (diameter) x L 76 mm Wooden box

Technical information: Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Back-Electret Condenser Cardioid 50-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 150 cm cable with 4p. Mini-XLR female-type). Windscreen Mounting clip 1 storage case mic: Ø 12 mm x L 17 mm Gooseneck: 125 mm 0,071 kg

[Gear] 04.03.11 21:58

Microphones Gea earr PL-07 D1301

PM-150

Instrument Dynamic Microphone

D6190

The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and GuitarBass Amps.

Technical information:

Technical Information Type: Dynamic, Moving coil. Freq. response: 40 to 16.500 Hz Polar Pattern: Cardioid Sensitivity (1000 Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max. SPL: 137 dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR (male-type) Accessories: 6 m balanced cable with XLR plugs Dimensions: Ø 32 mm x L 157 mm Net. Weight: 0,245 kg

DM-25

DM-20

The dynamic cartridge of the DAP DM-25 with cardioid polar pattern picks up the most sound from in front and the compact durable metal construction with integral stand mount is tuned specifically for close miking of snare drums, toms and percussion. It features a bright and neutral reproduction.

The DAP microphone DM-20 handles extreme low-frequency volume levels and is specially designed and tuned to capture the low punch of low-frequency instruments like kick-drums or bass-amps. With integral stand mount.

D1333

Instrument Dynamic Mic.

D1332

Instrument Dynamic Mic.

Power supply: Power consumption: Chime Unit: 440, dy up and down) Microphone: Output: Dimensions (LxWxH): Weight:

CM-10

Instrument Back Electret Condenser Microphone D1334

Technical information:

Type: Freq. response: Polar pattern: Sensitivity (1000 Hz):

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz):

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. Super Cardioid 20 to 12.500 Hz 2,2 mV/Pa* (*1 Pa = 94 dB SPL) 134 dB (THD ≤ 1% 1000 Hz) 500 Ohm none 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Integrated stand mount 1 storage case (Ø 43 mm x L 117 mm) 0,212 kg

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Microphones 01_02_DAP_Gear_10_temp2011.indd 83

DC 12V 1,6 Watt Melody of 4 frequencies 554, 659 and 880 Hz (meloElectret Condenser 0 dB/1V - 20 dB VR control 150 x 205 x 393 mm 0,7 kg

DK-5 D1331

Instrument microphone kit

The DAP CM-10 is a cardioid condenser microphone designed for Piano, acoustic Guitar, Acoustic Bass, Strings, Woodwinds, Orchestra, Cymbals, Live/studio Recording and Vocals.

Technical information: Dynamic, moving coil. 50 to 16000 Hz Super Cardioid 2,2 mV/Pa* (*1 Pa = 94 dB SPL) 134 dB (THD ≤ 1% 1000 Hz) 500 Ohm none 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Integrated stand mount 1 storage case (Ø 42 mm x L 117 mm) 0,186 kg

Announcement Microphone

Built-in Chime 4 tone melody • Mic-volume control on backside • Chime volume control on backside • Announcement button on front-topside

Back Electret Condenser Super Cardioid 50~16000 Hz 7 mv/Pa* (*1 Pa = 94 dB SPL) 137 dB (THD ≤ 1% 1000 Hz) 200 Ohm 9~48 Phantom 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Stand mount with 5/8 treat 1 storage case Ø 29 mm x L 165 mm 0,18 kg

[Gear]

DK-7 D1330

Instrument microphone kit Complete Set!

83 04.03.11 21:59

Microphones Gea earr

COM-41

The COM-41 wireless beltpack is a plug and play wireless starter package. It works on one frequency and it has no advanced menu’s and settings. So this is the easiest way to get started with wireless systems and it will always work. The beltpack transmitter has an indication to warn you when your batteries run low. The package includes a guitar cable, lavelier microphone and headset so this set will offer you everything you need for many applications.

The COM-41 wireless microphone is a plug and play wireless microphone for Dj’s and pubs and schools. It works on one frequency and it has no advanced menu’s and settings. This is the easiest way to get started with wireless microphones and it will always work. The handheld transmitter has a battery indication to warn you when your batteries run low.

D1409

Beltpack UHF Wireless Instrument Set

Technical information:

Special features: • Plug and play • Low battery indication • Guitar cable lavelier microphone and headset included

Modulation: Frequency: Frequency responce: THD: Maximum distance:

FM with thrue diversity 865.000 Mhz 50Hz - 18Khz < 1,0 % (1Khz) Up to 50 meters

Receiver:: Indications: Controls: Audio outputs: Power supply: Dimensions: Weight:

Antenna AB, AF signal On/Off switch, volume, sqelch XLR male balanced, 1/4” jack unbalanced DC 12--15V 300mA 47 x 210 x 160 mm (HxWxD) 0,4 Kg

Transmitter Connector: Headset mic: Lavelier mic: Indications: Controls: RF output power: Battery: Dimensions: Weight:

Dynamic Condenser, cardiod Condenser, cardiod Low battery On/Off/Standby switch, Squelch 30mW 9V Block 108 x 64 247 mm (HxWxD) 0,1 Kg

84 01_02_DAP_Gear_10_temp2011.indd 84

D1408

Handheld Set UHF Wireless Microphone

Technical information:

Special features: • Plug and play • Low battery indication

Modulation: Frequency: Frequency responce: THD: Maximum distance:

FM, diversity 863.550 Mhz 50Hz - 18Khz < 1,0 % (1Khz) Up to 50 meters

Receiver:: Indications: Controls: Audio outputs: Power supply: Dimensions: Weight:

Antenna AB, AF signal On/Off switch, volume, sqelch XLR male balanced, 1/4” jack unbalanced DC 12--15V 300mA 47 x 210 x 160 mm (HxWxD) 0,4 Kg

Transmitter Type microphone: Polar pattern: Indications: Controls: RF output power: Battery: Dimensions: Weight:

Dynamic Cardioid Low battery On/Off/Standby switch, Squelch 30mW 2 x AA size, 1.5V Length 253 mm, diameter 35 mm, 50 mm grill 0,2 Kg

Microphones

[Gear] 04.03.11 21:59

Microphones Gea earr

COM-52 Available models: D141273 Double UHF Wireless Mic System 740-752MHz

D141282

Double UHF Wireless Mic System 822 MHz

2 channel wireless microphone system • UHF diversity receiver with 2 x 1280 selectable Frequency’s • Included 2 dynamic hand-held microphones • Phase locked loop (PLL) circuitry synthetically technology • Automatic selectable receiving system • Multi wireless microphone performing simultaneous with interference elimination feature • 75m transmitting distance • LCD display function • Free and easy operation with clear and pure sound.

Technical information: Frequency stability: Image Interfere rate: S/N Ratio: Sensitivity: T.H.D.: Output connectors:

Audio output impedance: Audio output level: Frequency response: Receive Channel: Power supply: Receiver dimensions: Microphone: Dynamic range: Freq. Range: Spurious rejection: RF-output: Power consumption: Batteries: Material: Dimensions:

+/-0,005% >80 dB >105 dB -107 dB M <0,5% 2 x 3p. XLR balanced 2 x 6,3 mm jack unbalanced 1 x 6,3 mm jack mixed channel A & B 600 Ohm -12 dB 15 - 20.000 Hz Dual 16 channels 12-18V DC 1000 mA 19” x 1U x mm

Beltpack set for COM-51/52 Available models: D141573 740-752MHz, 2 Beltpacks,2 Lavaliers

D141582

>110 dB +/-48 kHz <-50 dB c 10 mW 100 mA 2 x AA 1,5V Plastic body with metal head ø32 x ø50 x 280 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 85

822-846MHz, 2 Beltpacks,2 Lavaliers

[Gear]

85 04.03.11 21:59

Microphones Gea earr EM-193 Available models: D145173 Wireless PLL handheld micr. 193 freq. 740-764 MHz

D145182

Wireless PLL handheld micr. 193 freq. 822-846 MHz

The DAP EM-193 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-1193. The EM-193 is suitable for vocal parts and voice transmission and can handle up to 193 switchable transmission frequencies in the UHF band. Technical Information Type: Dynamic, moving coil. Polar pattern: Cardioid Freq. Response: 50-16.000 Hz Sensitivity (1000 Hz): Max. SPL: 138 dB (1% THD) Impedance: Power supply: 2 x Battery UM3, AA1.5V (not included) Connector: Acc Accessories: 8 Colour-coded protection caps 1 stand mount 1 storage case Mini screw driver

Carrier Freq. Range: RF Output: Stability: Frequency Deviation: LCD Display: Controls: Spurious Rejection: Dimensions: Net. Weight:

740-764 MHz 10 mW ±0.005% ±48 kHz Frequency, battery fuel gauge Power On/Off, mode setting, AF Level Control, Freq. Up/Down, Lock-on mode <-60 dBC mic: Ø 50mm x L 255mm 0,34 kg

EEB-193 Ava Available models: D145273 Wireless PLL Beltpack Transmitter 193 freq 740-764 MHz

D145282

Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz

• PPLL synthesised 193 switchable frequencies. •O Operation in the UHF range •C Compatible for lavalier or headset microphones • PPowered by AA batteries • EEquipped with 3P mini XLR connector • LLCD Technical Information Tec Frequency Preparation: PL Synthesized Control Carrier Freq. Range: 740-764 MHz RF Output: 10 mW Sta Stability: ±0.005% Frequency Deviation: ±48 kHz LCD Display: Frequency, battery fuel gauge Controls: Power On/Off, AF level, Frequency Up/Down, Lock-on mode Spu Spurious Rejection: < -60 dBC Aud Audio Freq. response: 50 Hz - 16 kHz Battery: UM3, AA 1.5V x 2

86 01_02_DAP_Gear_10_temp2011.indd 86

Microphones

[Gear] 04.03.11 21:59

Microphones Gea earr EM-16 Available models: D143173 Wireless PLL handheld Microphone 16 freq. 740-764MHz

D143182

Wireless PLL handheld Microphone 16 freq. 822-846MHz

The DAP EM-16 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-216. The EM-16 is suitable for vocal and speech transmission and can handle up to 16 switchable transmission frequencies in the UHF band. Technical Information Type: Polar pattern: Frequency Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories:

Dynamic, moving coil. Cardioid 50-16.000 Hz 138 dB (1% THD) 2 x Battery UM3, AA1.5V (not included) 8 Colour-coded protection caps 1 stand mount 1 storage case Mini screw driver

Carrier Frequency Range: 740-764MHz RF Output: 10 mW Stability: ±0.005% Frequency Deviation: ±48 kHz LCD Display: Frequency, battery fuel gauge Controls: Power On/Off, mode setting, AF Level Control, Frequency Up/Down, Lock-on mode Spurious Rejection: <-60 dBC Dimensions: mic: Ø 50 mm x L 260 mm Net. Weight: 0,262 kg

EB-16 Available models: D143273 Wireless PLL Beltpack Transmitter 16 freq 740-764MHz

D143282

Wireless PLL Beltpack Transmitter 16 freq. 822 - 846 MHz

• PLL synthesised 16 switchable freq. • Operation in the UHF range • Compatible for lavalier or headset microphones • Powered by AA batteries • Equipped with 3P mini XLR connector • LED Technical Information Frequency Preparation: Crystal Carrier Frequency Range: 740-764MHz RF Output: 10 mW Stability: ±0.005% Frequency Deviation: ±48 kHz LED Display: Power On/Off, Channel Controls: Power On/Off, AF level Spurious Rejection: < -60 dBC Audio Freq. response: 50 Hz - 16 kHz Battery: UM3, AA 1.5V x 2

ER-1193 Available models: D145073 1 Channel 193 Freq. PLL Receiver 740-764 MHz

D145082

1 channel 193 Freq. PLL Receiver 822-846 MHz

• 193 selectable UHF Frequencies. • Available for 1 transmitter • True diversity technology permits minimum dropouts in the RF link • PLL synthesised technology for multi-channels. Technical Information Frequency Preparation: PLL Synthesised Control Carrier Frequency range: 740-764 MHz Frequency Stability: ±0.005% S/N Ratio: >100 dB Display: LCD Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level

• Compact half-rack metal housing for space saving • “Lock-on” mode avoids accidental modification of frequency, sensitivity and power-off.

Audio Output Level: AF Output Impedance: Squelch: Operation Voltage: Output Connector: Unbalanced Dimensions: (LxWxH)

-12 dB 600 Ohm Pilot Tone & Noise Mute 12-18 VDC, 500 mA XRL Balanced/ 6,3 mm 211 x 152 x 40 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 87

[Gear]

87 04.03.11 21:59

Microphones Gea earr

ER-216 Available models: D143073 2 Channel 16 Freq. PLL Receiver 740-764 MHz (Germany)

D143082

2 Channel 16 Freq. PLL Receiver 822-846 MHz

• Pre-set 16 selectable UHF channels • Diversity technology permits minimum dropouts • Noise mute and pilot tone squelch circuit eliminate unwanted signal and noise interference • LCD • 19” /1HU rack metal housing

Duracell Procell AA 98040

LR6, MN1500, 1,5V

88 01_02_DAP_Gear_10_temp2011.indd 88

Duracell Procell AAA 98041

LR03, MN2400, 1,5V

Technical Information Receiver Specification: ER-216 Frequency Preparation: PLL Synthesised Control Carry Frequency Range: 740-764 MHz Frequency Stability: ±0,005% S/N Ratio: > 100 dB Display: LCD Display Contents: Channel, antenna A/B, RF/AF Level meter, Battery fuel gauge Controls: Power On/Off, Channel selector, Audio Level Audio Output Level: -12 dB AF Output Impedance: 600 Ohm Squelch: Pilot Tone & Noise Mute Operation Voltage: 12-18VDC, 500 mA

Duracell Procell 98042

Microphones

6LR61, MN1604, 9V

Output Connector: 2 Balanced XRL socket, 1 Unbalanced 6,3 mm socket Dimensions: 483 x 232 x 45 mm (LxWx82

GC-1 D1417 Guitar cable for use with Beltpacks of Eclipse Range

[Gear] 04.03.11 21:59

Microphones Gea earr D1415

D1420

D1416

EH-3

D1426

Universal Headset Microphone

The EH-3 is a back electret condenser microphone which is suitable for the Eclipse series beltpacks as well other common beltpacks with a 4 pole mini XLR. The EH-3 is due it is fine finishing very suitable for theatre and TV applications. • Compact • Skin Color • Removable extension cable • Very thin, so nearly not visible.

D1426

Technical Information Element: Back Electret Condenser Polar pattern: Omni-directional Frequency response: 20Hz – 20kHz Sensitivity: -45dB +-3dB, Output impedance: 2K Ohm +-30% SPL Max.: 140dB Cable: 1,2 mm x 1,2 mm Connector: 4 pole mini XLR

D1419

Spare Cable for EH-3 D1427

EH-1

Condenser Stage Headset Microphone D1416

Uni-direction for high-quality voice pick-up. • Excellent gain-before-feedback and noise isolation. • Lightweight and hands free design provide great freedom. • Ergonomic design ensures comfortable wearing.

Max. SPL: Impedance: Power supply: Connector: Gooseneck: Accessories: Dimensions: Net. Weight:

D1415

Condenser Lavalier Microphone

Uni-direction for high-quality voice pick-up. • Wide dynamic range and frequency response for high quality sound. • Small size for minimum visibility. • Together with clothing clip for easy attaching to a tie, lapel, dress etc.

Technical information:

Technical information: Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz):

EL-1

Back-Electret Condenser Super Cardioid 100-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 125 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 110 cm cable with 4p. Mini-XLR (female-type) 123 mm Windscreen Integrated Headset mic: Ø 12 mm x L 17 mm 0,056 kg

Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

EH-2

D1420

range.

The DAP EH-2 is an omni-directional (no proximity effect) condenser microphone designed for voice pick-up. It has a skin colour and is therefore almost not visible for the audience. The wide dynamic range and frequency response provide a high quality sound.

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Net. Weight: Dimensions: Gooseneck: Accessories:

EL-2

D1419 Miniature Lavalier Microphone for eclipse range.

The DAP EL-2 is an omni-directional (no proximity effect) condenser microphone designed for voice pick-up and various applications. The wide dynamic range and frequency response provide a high quality sound. A clip for easy attaching to a tie, collar, dress, etc. is included. Technical information:

Technical information: Back-Electret Condenser Super Cardioid 100-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 125 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 110 cm cable with 4p. Mini-XLR (female-type) Windscreen Clothing clip mic: Ø 12 mm x L 17 mm 0,024 kg

Microphones 01_02_DAP_Gear_10_temp2011.indd 89

Head Microphone for eclipse

Back-Electret Condenser Omni 60-15.000 Hz 1 mv / Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 2,2 kilo-Ohm ± 30% Phantom from Beltpack 150 cm cable with 4p. Mini-XLR (female-type) 50 g mic: Ø 5 mm x L 9 mm 125 mm Windscreen 1 protection bag

[Gear]

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Net. Weight: Dimensions: Accessories:

Back-Electret Condenser Omni 60-15.000 Hz 1 mv/Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 2,2 kilo-Ohm ± 30% Phantom from Beltpack 150 cm cable with 4p. Mini-XLR (male-type) 50 g mic: Ø 5 mm x L 9 mm 2 x Windscreen Mounting clip 1 protection bag

89 04.03.11 21:59

Microphones Gea earr

In Ear System Transmitter D1481

• For use as in-ear • Tour guide system • to feed active speakers • price effective • special charging hole

Technical Information Operating Frequency: 500-980 MHz Frequency Stability: +0.005% Transmitting power output: 10mW (H), 5mW (L) AF gain adjusting: -20 dB to +35 dB Frequency Response: 50Hz-15KHz ± 3dB Power supply: 2x AA batteries Standing time: about 8 hours

In Ear System Receiver D1480

• Tour guide system • to feed active speakers • price effective

Technical Information Operating Frequency: 500-980 MHz Frequency Response: 50Hz-15KHz ± 3dB AF output change: Earphone / Line Output Power supply: 2x AA batteries Standing time: about 8 hours • Special charging hole • AF output voltage adjusting knob • Noise locked + pilot tone locked

Battery Charger for In-Ear system D1482

Dedicated charger to charge 2 pieces In ear system receiver or transmitter. The charger shows you the status of the batteries. Only to be used with rechargeable batteries.

90 01_02_DAP_Gear_10_temp2011.indd 90

Microphones

[Gear] 04.03.11 21:59

Headphones Gea earr

IEM-100 Beltpack

IEM-100 Available models:

D147079 D147073 D147082

Available models: D147173 UHF PLL 785-811 MHz

In Ear Monitoring System UHF PLL 790-814 MHz In Ear Monitoring System UHF PLL 710-790 MHz In Ear Monitoring System UHF PLL 822-846 MHz

Technical Information Transmitter Specification: Frequency Range: 790 - 814 MHz (D147073) 822 - 846 MHz (D147082) Bandwidth: 25 MHz Oscillation Mode: PLL Synthesized Frequency Stability: ±0.005% 0°C~+50°C Modulation: FM Stereo modulation Output Power: Low:<10 mW; High: <100 mW Spurious Rejection: -60 dB c Max. Deviation Range: 25 kHz Frequency Response: 50 ~ 15.000 Hz T.H.D.: <0.5% (at maximum deviation range at 1 kHz)

D147182

Audio Output: Audio Input: Earphone Output:

Line Level X2, XLR 6.3 mm phone jack X2 6.3 mm stereo phone jack with adjustable volume Earphone Output Imp.: >16 Ohm Antenna Connector: TNT (50 Ohm Impedance) Dimensions: 210 x 175 x 45 mm Receiver Specification: Frequency Range: 790 - 814 MHz (D147079) 822 - 846 MHz (D147082) Bandwidth: 25 MHz Oscillation Mode: PLL Synthesised Frequency Stability: ±0.005% 0°C ~ +50°C

Modulation: Max. Deviation Range: Receiving Mode: Receiving Sensitivity: Squelch Level:

FM Stereo modulation ±68 kHz Diversity Receiving -107 dB m -100 dB m -90 dB m -70 dB m T.H.D.: 1% Max. S/N Ratio: 94 dB A Frequency Response: 80 - 15.000 Hz, ±3 dB Stereo Separation: 35 dB Earphone Output: 3.5 mm Output Power (32 Ohm): 2 x 50 mW under 1 kHz (T.H.D. 3%) Earphone Impedance: >16 Ohm Power Supply: 2 AA batteries Current Consumption: 150 mA Dimensions: 123 x 65 x 27 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 91

UHF PLL 822-846 MHz

[Gear]

91 04.03.11 21:59

Microphones Gea earr PAS-2 D1445

Separate Antenna for Booster/Splitter Passive Antenna Splitter

D1448

19” Rack Adapter for 2 pieces ER-1193

Antenna Booster

D1453

D1425

For Eclipse range

Antenna Distributor D1444 For Eclipse Range. • Frequency Range: 470 ~ 870 MHz • Provides 4 power supply of DC12V • 4 pairs of antenna output provided • 90 ~ 260V switching power • DC14V antenna booster power provided • Advanced circuit design offers signals with extremely low distortion

Including: 10 x BNC cable 60 cm 1 x Power cable 4 x Power adapter cable 2 x BNC male/female connector

ADA-20 Active UHF D1446 Directional Antenna Receiver Full frequency band: 470 - 870 MHz Effective working angle: 100° Frequency Band: 470 – 870 MHz Antenna Gain: > 10 dB Effective working angle: 100 degrees Connector: Female BNC Weight: 0,4 kg

92 01_02_DAP_Gear_10_temp2011.indd 92

PDA-20 Passive UHF Power supply: Boostergain: With LED indicator

12V, 50 mA 3 dB / 10 dB selectable

D1447 Directional Antenna Receiver Full frequency band: 470-870 MHz Effective working angle: 100° Frequency Band: 470 – 870 MHz Antenna Gain: > 10 dB Effective working angle: 100 degrees

Microphones

Connector: Weight:

Female BNC 0,4 kg

[Gear] 04.03.11 21:59

Headphones Gea earr

DH-135

DH-140

Stereo-headphone deluxe! Brilliant sound without interference or distortion. The big headphone-shells protect the user from “outside noise” and their ergonomic shape provide comfortable wearing. Moreover, the DH135 has a stylish look. Just lean back and enjoy the music!

A professional versatile headphone for a wide range of applications. Dynamic stereo headphone with excellent, transparent sound with bright and clear high Main features: • dynamic stereo headphone frequencies, big mid-tone and forced bass. • Neodymium-ferrous magnet system The stuffed headphone shells guarantee a complete isolation against noise from the out- • Transparent full-frequency reproduction side so that you can enjoy high volumes with- • Large surface radial diaphragm driver unit for clear, high quality sound out interference or distortion. Superb price/ reproduction. quality relation.

D1808

Foldable Headphone

Headphone with Active Bass Drive Unit D1803

HP-200 D1804

Stage Monitor Headphone

DH-150 D1809

DJ Headphone

Technical information:

• Ø40 mm Cobalt Driver Unit • Impedance: 64 Ohm ±15% • Sensitivity: 110 dB ± 3 dB at 1 kHz • Freq. response: 20-20,000 Hz • Maximum Power Input: 100 mw • Rated Power Input: 1 mw • Cord Length: 2m • With Gold Plated 3,5 mm Plug

• Ø40 mm Cobalt Driver Unit • Impedance: 32 Ohm ±15% • Sensitivity: 105 dB ±3 dB at 1 kHz • Freq. response: 20-20,000 Hz • Maximum Power Input: 100 mw • Rated Power Input: 1 mw • Power Requirements: 3V • Cord Length: 2m • With Gold Plated 3,5 mm Plug

• Freq. response: • Impedance: • Sensitivity: • Rated power: • Foldable design • Weight:

Driver unit: Impedance: Sensitivity: Freq. Response: Max Power Input: Cord lenght: Connector: Weight:

0,285 kg

Ø 50 mm 32 Ohm 108 +/- 3 dB 20 - 20.000 Hz 500 mW 1,4m 3,5 mm Plug 0,3 Kg

Special features: • Tight but comfortable fit • Fat Dj sound • Including curled and straight cable • Including extra pair ear cushions

HS-1 Koss headset D1463 Koss In-ear headset with 6 pre-shaped ear cushions

Headphones 01_02_DAP_Gear_10_temp2011.indd 93

DAP DH-150 is a professional fully closed DJ headphone. It has 50mm drivers to ensure a fat bass and clear high frequencies. It is finished with a silica gel headband and has a tight but very comfortable fit. Due to this tight fit and big shells you get a perfect insulation against outside noise. The head shells can be rotated 90° but will automatically flip back. The curled cable is detachable and a straight cable is included just like an extra pair ear cushions. DH-150 proves that a good DJ headphone doesn’t have to be expensive.

Technical information:

20 Hz - 20 kHz 6 Ohm at 1 kHz 104 dB/mW at 1 kHz 0,5W

NEW PRODUCT

[Gear]

93 04.03.11 21:59

Amplifiers Gea earr DSA-250

D4091 2U High Power Class-B Stereo PA Amplifier

Special features: • Compact stylish design (Depth: 335mm) • LCD Display with operational info • 2 Ohm Stable • Speaker relay and clip protection • Link trough XLR connections

DSA-400

2U High Power Double Class-H Stereo PA Amplifier D4092

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: 8 Ohm: 2x 150 Watt RMS 4 Ohm: 2x 260 Watt RMS Bridge mode: 8 Ohm: 520 Watt RMS Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 350 Slew Rate: > 32 V/µS Signal to Noise Ratio: > 106 dB A-weighted

DSA-600

2U High Power Double Class-H Stereo PA Amplifier D4093

Input Sensitivity (Selectable): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

DSA-800

2U High Power Double Class-H Stereo PA Amplifier D4094

Output Modes (Selectable): Cooling: Airflow: Input / Link Connector: Output Connector: Groundlift Switch: Dimensions (W x H x D): Net Weight: Power Supply: Main Fuse:

Stereo / Parallel / Bridge Multi Speed Fan Front to Back XLR / XLR 2x Speakon Yes 483 x 89 x 335 mm 14.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

DSA-1000

D4095 2U High Power Double Class-H Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode:

Stereo mode: RMS

Stereo mode:

8 Ohm: 2x 500 Watt RMS 4 Ohm: 2x 800 Watt RMS 2 Ohm: 2x 1000 Watt RMS

Bridge mode:

8 Ohm: 1600 Watt RMS 4 Ohm: 2000 Watt RMS

Bridge mode:

8 Ohm: 2x 260 Watt RMS 4 Ohm: 2x 400 Watt RMS 8 Ohm: 800 Watt RMS

Bridge mode:

8 Ohm: 2x 330 Watt RMS 4 Ohm: 2x 500 Watt RMS 2 Ohm: 2x 625 Watt RMS 8 Ohm: 1000 Watt RMS 4 Ohm: 1250 Watt RMS

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 350 Slew Rate: > 32 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 450 Slew Rate: > 38 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced

Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

Output Modes (Select.): Stereo / Parallel / Bridge Cooling: Multi Speed Fan Airflow: Front to Back Input / Link Connector: XLR / XLR Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (WxHxD): Net Weight: Power Supply: Main Fuse:

483 x 89 x 355 mm 16.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

94 01_02_DAP_Gear_10_temp2011.indd 94

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

483 x 89 x 335 mm 16.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

RMS

8 Ohm: 2x 465 Watt 4 Ohm: 2x 700 Watt 2 Ohm: Not Allowed

Bridge mode:

8 Ohm: 1400 Watt RMS 4 Ohm: Not Allowed

Frequency Response: THD+N: Intermod. Distortion: Damping Factor at 8 Ohm: Slew Rate: Input CMRR: Crosstalk 20 - 20,000 Hz: Signal to Noise Ratio: Input Sensitivity: Max Input Voltage: Input Impedance:

10 - 20,000 Hz, -1 dB < 0.03% < 0.05% > 450 > 15 V/µS > 60 dB > 60 dB > 95 dB A-weighted 1 V~, +2.2 dBu +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced

Lowpass filter: 120 Hz, 24 dB/Oct Linkwitz Riley Highpass filter: 120 Hz, 24 dB/Oct Linkwitz Riley Protection: Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start Output Modes (Select.): Stereo / Parallel / Bridge Crossover Modes: Lowpass / Bypass / Highpass Cooling: Dual Speed Fan Airflow: Front to Back Input / Link Connector: XLR / Jack Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (LxWxH): 482 x 360 x 88 mm Net Weight: 15 kg Power Supply: 240V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2230 Watt

Amplifiers

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohms: > 450 Slew Rate: > 50 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

483 x 89 x 335 mm 16.5 kg 230 V~, 50-60 Hz 15A, 5 x 20 mm

[Gear] 04.03.11 21:59

Amplifiers Gea earr

Special features: • Compact stylish design (Depth: 335mm) • LCD Display with operational info • 2 Ohm Stable • Speaker relay and clip protection • Link trough XLR connections

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS RMS Bridge mode:

4 Ohm: 2x 1050 Watt 2 Ohm: 2x 1500 Watt

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

RMS RMS Bridge mode: RMS RMS Frequency Response: THD+N: Damping Factor at 8 Ohm: Slew Rate: Signal to Noise Ratio: Input Sensitivity (Select.): Max Input Voltage: Input Impedance: Subsonic Filter (Select.):

8 Ohm: 2x 840 Watt

Lowpass Filter (Select.): Protection:

2 Ohm: 2x 1920 Watt 8 Ohm: 2720 Watt 4 Ohm: 3840 Watt 15 - 35,000 Hz, -1 dB < 0.03% > 430 > 40 V/µS > 103 dB A-weighted 775 mV~, 1 V~, 1.4 V~ +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced 30 Hz, 18 dB/oct

8 Ohm: 2x 1200 Watt

150 Hz, 18 dB/Oct

Vision-2400

Lowpass Filter (Select.): Protection:

8 Ohm: 3840 Watt

150 Hz, 18 dB/Oct

Vision-3500 D4153

3U High Power Triple Class-H Stereo PA Amplifier

Clip Limiter (Selectable) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Multi Speed Fan Back to Front XLR / XLR 2x Speakon. 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 36.06 kg Power Supply: 240 V~, 50 Hz Main Fuse: 18AT, 6 x 32 mm Power Consump. (2 x 4 Ohm): 4800Watt

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 95

3U High Power Triple Class-H Stereo PA Amplifier

D4152

Clip Limiter (Selectable) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Stereo / Parallel / Bridge Multi Speed Fan Back to Front XLR / XLR 2x Speakon. 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 33.8 kg Power Supply: 240 V~, 50 Hz Main Fuse: 15AT, 6 x 32 mm Power Consump. (2 x 4 Ohm): 3430 Watt

2 Ohm: 2x 2850 Watt

15 - 35,000 Hz, -1 dB < 0.03% > 400 > 44 V/µS > 103 dB A-weighted 775 mV~, 1 V~, 1.4 V~ +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced 30 Hz, 18 dB/oct

2U High Power Class-AB Stereo PA Amplifier

D4151

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

4 Ohm: 2x 1920 Watt

4 Ohm: 5700 Watt

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Stereo / Parallel / Bridge Cooling: Multi Speed Fan Airflow: Back to Front Input / Link Connector: XLR / XLR Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 24.62 kg Power Supply: 240 V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 3000 Watt

4 Ohm: 2x 1360 Watt

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS

Protection:

8 Ohm: 2x 620 Watt

8 Ohm: 2100 Watt RMS 4 Ohm: 3000 Watt RMS Frequency Response: 8 - 50,000 Hz, -1 dB THD+N: < 0.03% Damping Factor at 8 Ohm:> 400 Slew Rate: > 30 V/µS Signal to Noise Ratio: > 103 dB A-weighted Input Sensitivity (Select.): 775 mV~, 1 V~, 1.4 V~ Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced Subsonic Filter (Select.): 30 Hz, 18 dB/oct

Stereo mode: RMS

Vision-1600

[Gear]

95 04.03.11 21:59

Amplifiers Gea earr Special features: In the months April / May 2011 Highlite International BV, expects to sell the 50.000th DAP-audio Palladium Vintage stereo power amplifier.

Elements Series Palladium

These completely redesigned Palladium amplifiers will bring “good looks” into your gear rack! Inspired by the retro-look found in tube-amps and 19” rackgear, this Palladium Vintage offers sufficient power packed in a very stylish housing at a really competitive price! The whole series contains no less than 7 models, each within its own power and price range. Mainfeatures: • Tough “roadproof” housing • 19” rackmountable • True stereo power for DJ Special features: • Very affordable and reliable power • Over 8 years of proven quality • XLR and Jack inputs • Speakon and terminal outputs

P-400 Vintage D4131

Stereo Power Amplifier

Technical information: Stereo mode: Bridged mode:

2 x 100 Watt RMS - 8 Ohm 2 x 200 Watt RMS - 4 Ohm 400 Watt RMS - 8 Ohm

Freq. response:

20 Hz -20 kHz: + 0.1 / - 3 dB (1W / 8 Ohm) THD into 4 Ohm, 1 kHz: <0.05% at 200W SMPER IMD: <0.01% at 100W, into (60 Hz & 7 kHz) Slew Rate: 40V/ µs Damping Factor: 300:1,1 kHz at 8 Ohm Input CMRR (at 1 kHz): >60 dB Voltage Gain: 50 x standard Input Sens. (at 8 Ohm): 0.775V for rated power Input Impedance: Hum and Noise: Crosstalk:

20 kilo-Ohm, balanced 10 kilo-Ohm, unbalanced -103 dB <60 dB

Connectors (per ch.):

Female XLR (pin 2+), TRS (tip +), 5-way Output binding post Power Supply: 230 V / 50-60 Hz Max. Curr. Draw 220V: 5 A Cooling: 2 variable speed DC fans Controls: 2 front attenuators, rear panel signal ground lift jumper Indicators (per ch.): Protection:

Dimensions (LxWxH): Gross Weight: Net Weight:

96 01_02_DAP_Gear_10_temp2011.indd 96

PROTECT LED, CLIP LED, SIGNAL LED, POWER LED Temperature, DC, sub/ultea, sonic short circuit, IGM, output 483 x 400 x 89 mm 20 kg 18 kg

P-500 Vintage

2U High Power Class-AB Stereo PA Amplifier D4132

P-700 Vintage

D4133 2U High Power Class-AB Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode: RMS

RMS

8 Ohm: 2x 180 Watt 4 Ohm: 2x 270 Watt

RMS

8 Ohm: 2x 240 Watt 4 Ohm: 2x 360 Watt

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 540 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed 8 Ohm: 720 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

Protection:

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 11,78 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 6.3AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 850 Watt

Amplifiers

Bridge mode:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 13,44 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 8AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 1100 Watt

[Gear] 04.03.11 21:59

Amplifiers Gea earr

P-900 Vintage

2U High Power Class-AB Stereo PA Amplifier D4134

P-1200 Vintage

2U High Power Double Class-H Stereo PA Amplifier D4135

P-1600 Vintage

2U High Power Double Class-H Stereo PA Amplifier D4136

P-2000 Vintage

D4137 2U High Power Double Class-H Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode: RMS

RMS

8 Ohm: 2x 350 Watt 4 Ohm: 2x 525 Watt

RMS

8 Ohm: 2x 530 Watt 4 Ohm: 2x 800 Watt

RMS

8 Ohm: 2x 600 Watt 4 Ohm: 2x 900 Watt

Technical information:

RMS

8 Ohm: 2x 700 Watt 4 Ohm: 2x 1050 Watt

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1050 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1600 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 k Ohm Balanced 10 k Ohm Unbalanced

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1800 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed 8 Ohm: 2100 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

Protection:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 15,32 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 10AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 1650 Watt

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (W x H x D): 483 x 89 x 430 mm Net Weight: 16,26 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 10AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2300 Watt

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 18,96 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 12AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2440 Watt

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 97

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

[Gear]

Bridge mode:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 19 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2925 Watt

97 04.03.11 22:00

Amplifiers Gea earr

Special features: • Rugged but lightweight steel housing (15Kg) • Tour proof amplification quality • 2 Ohm Stable • Tight and high bass pressure • Very reliable due to overdimensioned switching power supply

Stage-Amp Series

• Professional switched mode power amplifier. • Strong, rugged steel housing. • Clear led indicators for status mode, signal input, protection, clip, overheat.

Stage-Amp 2.2

Stage-Amp 2.6

Stage-Amp 4.0

Stage-Amp 4.4

Amplifier

D4502

2 x 1050W SMPS Power

D4503

2 x 1400W SMPS Power

D4504

2 x 2000W SMPS Power

D4505

2 x 2500W SMPS Power

Technical information:

Stereo output power 8 Ohm: Stereo output power 4 Ohm: Stereo output power 2 Ohm: Bridge output power 8 Ohm: Bridge output power 4 Ohm: Frequency response (8 Ohm):

650W (1) 1100W (1) 1500W (2) 2200W (1) 3100W (2) 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm, 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 15,0 kg

Stereo output power 8 Ohm: 800W (1) Stereo output power 4 Ohm: 1300W (1) Stereo output power 2 Ohm: 2000W (2) Bridge output power 8 Ohm: 2600W (1) Bridge output power 4 Ohm: 4100W (2) Frequency response (8 Ohm): 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4 V THD+N (8 Ohm, 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear air flow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 15,0 kg

Stereo output power 8 Ohm: 1200W (1) Stereo output power 4 Ohm: 2000W (1) Stereo output power 2 Ohm: 3000W (2) Bridge output power 8 Ohm: 4000W (1) Bridge output power 4 Ohm: 6000W (2) Frequency response (8 Ohm): 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm), 1 kHz) ? output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 16,0 kg

Stereo output power 8 Ohm: Stereo output power 4 Ohm: Stereo output power 2 Ohm: Bridge output power 8 Ohm: Bridge output power 4 Ohm: Frequency response (8 Ohm):

1450W (1) 2200W (1) 3500W (2) 4500W (1) 7000W (2) 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm), 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 16,0 kg

(1)The output power is tested conform EIA Standard. (2) The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

(1)The output power is tested conform EIA Standard.(2)The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

(1)The output power is tested conform EIA Standard. (2)The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

98 01_02_DAP_Gear_10_temp2011.indd 98

Amplifiers

[Gear] 04.03.11 22:00

Amplifiers Gea earr DPA-1200 Vintage

1U Compact Class-D Stereo HEXFET Power Amplifier

D4180

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS Frequency Response: THD+N: Crosstalk: Signal to Noise Ratio: Input Sensitivity (Selectable): Input Impedance:

Protection:

8 Ohm: 2x 375 Watt 4 Ohm: 2x 750 Watt 2 Ohm: Not Allowed 5 - 30,000 Hz, -1 dB < 0.05% > 70 dB > 105 dB A-weighted 1.1 V~ 10 kOhm Unbalanced 20 kOhm Balanced

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483x44.9x491 mm Net Weight: 10.36 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 1725 Watt

DPA-2400 Vintage D4181

1U Compact Class-D Stereo HEXFET Power Amplifier

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS

8 Ohm: 2x 625 Watt 4 Ohm: 2x 1200 Watt

2 Ohm: Not Allowed Frequency Response: 5 - 30,000 Hz, -1 dB THD+N: < 0.05% Crosstalk: > 70 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity (Selectable): 1.1 V~ Input Impedance: 10 kOhm Unbalanced 20 kOhm Balanced Protection:

Output Overload DC Voltage High Temperature Soft Start Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483 x 44.9 x 491 mm Net Weight: 10.8 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 2800 Watt

Clip Limiter (Fixed) Short Circuit Input Overload

DPA-3400 Vintage D4182

1U Compact Class-D Stereo HEXFET Power Amplifier

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS

8 Ohm: 2x 1000 Watt 4 Ohm: 2x 1800 Watt

Soft Start Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483 x 44.9 x 491 mm Net Weight: 10.96 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 4200 Watt

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 99

[Gear]

99 04.03.11 22:00

Amplifiers Gea earr

Falcon Amplifier Range

The new Falcon amplifier range is a true breakthrough in the world of amplifiers. With this new Falcon amplifier range DAP brings you a true 100% digital amplifier for the price of only a conventional order. The Falcon digital amplifiers are lightweight, powerful and have a stylish design. It is equipped with all necessary safety features and protections as well a clean sound in all circumstances. Key features: • Lightweight • Compact design • Full digital sound processing • 8 Ohm, 4 Ohm and Bridge mode • High efficiency • Environment friendly • Stylish design • Very affordable Digital amplifier. • Class D Amplifiers Special features: • Entry level digital amplifier • Compact design (Depth only 302mm) • Very silent by audio-controlled fan speed • Complete digital sound processing

100 01_02_DAP_Gear_10_temp2011.indd 100

Falcon 700 D4200

2x420W 4Ohm

Falcon 1000 D4201

2x480W 4Ohm

Technical information:

Load Impedance: 8 Ohm 4 Ohm Rated output power: 2x 240W 420W Max. bridged output power: 840W Max. RMS voltage swing: 40V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,7 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 280W 480W Max. bridged output power: 960W Max. RMS voltage swing: 48V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Amplifiers

[Gear] 04.03.11 22:00

Amplifiers Gea earr

Falcon 1500 D4202

2x650W 4Ohm

Falcon 1700 D4203

Falcon 2000

2x720W 4Ohm

D4204

2x850W 4Ohm

Technical information:

Load Impedance: 8 Ohm 4 Ohm Rated output power: 375W 650W Max. bridged output power: 1300W Max. RMS voltage swing: 53V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 420W 720W Max. bridged output power: 1440W Max. RMS voltage swing: 60V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 520W 850W Max. bridged output power: 1700W Max. RMS voltage swing: 60V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 101

[Gear]

101 04.03.11 22:00

Portable Soundsystems Gea earr

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, wireless mic’s • Trolley model makes transportation easy

PSS-108 D2603

8” Portable Speaker System

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, D, wireless mic’s • Trolley model makes transportation easy

NEW PRODUCT

PSS-110 D2604

10” Portable Speaker System

NEW PRODUCT

The PSS serie is available with 8”, 10”and 12” speakers.

Key features: • Battery & 230V operation • Integrated charger • 2 x Wireless microphone • CD / USB / SD Player • Tuner • Echo & Tone control • 3 x mic input • Aux input

Technical information:

Technical information: Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 50 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 10” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response:

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

485 x 298 x 260 mm 17,5 Kg

Dimensions (HxWxD): Weight:

485 x 298 x 260 mm 19 Kg

Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 50 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 8” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response: Dimensions (HxWxD): Weight:

Outputs:

102 01_02_DAP_Gear_10_temp2011.indd 102

Outputs:

Portable Soundsystems

[Gear] 04.03.11 22:00

Portable Soundsystems Gea earr

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, wireless mic’s • Trolley model makes transportation easy

PSS-112 D2605

12” Portable Speaker System

NEW PRODUCT

The PSS series are wireless PA systems with integrated self charging batteries. They are compact and complete with two wireless microphones, a CD-SD-USB player, tuner and audio mixer. It is an one in all concept that is very easy to use for events at places where you don´t have access to a main power supply like: • Fair events • Theme parks • Sport events • Outdoor church services • Street musicians • Product presentations The PSS serie is available with 8”, 10”and 12” speakers. Key features: • Battery & 230V operation • Integrated charger • 2 x Wireless microphone • CD / USB / SD Player • Tuner • Echo & Tone control • 3 x mic input • Aux input Technical information: Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 80 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 12” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response:

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

Dimensions (HxWxD): Weight:

485 x 298 x 260 mm 19,5 Kg

Outputs:

Portable Soundsystems 01_02_DAP_Gear_10_temp2011.indd 103

[Gear]

103 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng

CM-1 D1360

Technical information:

Small Diagram Pencil Condenser

The DAP CM-1 is a thin model condensermicrophone that comes with a cardioid and omni element. Depending on the application or personal taste the element can be exchanged. The CM-1 is ideally suited as a microphone for recording live ambient, drum overhead or acoustic instruments.

104 01_02_DAP_Gear_10_temp2011.indd 104

Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 30 Hz - 22 kHz (-3 dB) omni or cardioid 10 mV/Pa -40 dB 132 dB 200 Ohm +48V phantom XLR male type 130 g 23 mm (diameter) x L 150 mm microphone-clip

CM-67 D1366

Studio FET Condenser Mic.

The DAP CM-67 is a large diaphragm condenser-microphone for recording purposes. But it can also be used for live sound amplification in not so rough situations like acoustic ensembles or orchestras.

Studio-Microphones

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 30 Hz - 20 kHz (-3 dB) cardioid 14 mV/Pa -38 dB 128 dB 200 Ohm 48V Phantom power 3p. XLR male type 390 g 50 mm (diameter) x L 151 mm Shockmount

[Recording] 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng

CM-87

Large membrane Condenser Microphone D1365

The DAP CM-87 is a large diaphragm condenser-microphone for recording purposes. But it can also be used for live sound amplification in not so rough situations like acoustic ensembles or orchestras.

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 20 Hz - 20 kHz (-3 dB) cardioid, figure-of-8, omni switchable 8 mV / Pa -42 dB 130 dB / 140 dB switchable 200 Ohm 48V Phantom power 3p. XLR male type 470 g 50 mm (diameter) x L 167 mm Shockmount

TM-47 D1370

Tube Microphone

The DAP TM-47 is a classic model condensor-microphone that uses a tube as internal amplifier. This way the microphone has an unsurpassed warm sound and a large dynamic range. It has a large membrane condenser element of which the characteristic can be changed in 9 steps from omni, via cardioid to figure of 8.

Studio-Microphones 01_02_DAP_Gear_10_temp2011.indd 105

Technical information:

[Recording]

Type: Freq. resp.: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser / tube 20 Hz - 20 kHz (-3 dB) omni - cardioid - figure-of-8 20 mV / Pa -36 dB 134 dB / 144 dB (-10 dB switch) 200 Ohm included 9 m dedicated cable / XLR male type 1500 g mic. at 68 mm x L 185 mm case, protection-bag, power-supply, mains-cable, interconnection-cable, spider shock-mount and windscreen.

105 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng Special features: • Plug and play • no drivers needed • Works with PC and MAC • High quality AD converter • For vocal recordings

RM-101 D1375

Ribbon Microphone

The DAP RM-101 is a classic model ribbonmicrophone that convinces with an unsurpassed warm sound when used for voices. Due to the 2” large ribbon and the figure of 8 characteristic it can also be used for recordings with a realistic ambience.

106 01_02_DAP_Gear_10_temp2011.indd 106

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Electromagnetic / ribbon 30 Hz - 18 kHz (-3 dB) figure-of-8 1,8 mV/Pa -55 dB 145 dB 200 Ohm none cable with 3p. XLR male type 1000 g 72 mm (diameter) x L 247 mm protection-bag and case

URM-1 D1601

USB Studio Condenser microphone

NEW PRODUCT

This USB microphone is the most easy solution for instant recording without having expensive interfaces, driver problems and setup procedures. Do you have a creative musical idea, connect the URM-1 with your PC or MAC, start recording and surprise yourself with the professional sound quality. The URM-1 has a 22mm moving golden diaphragm with a cardioid pickup pattern and works with practically all DAW software. The URM-1 comes with USB cable, shockmount and carry pouch. Technical Information Type: Freq response: Polar pattern: Sensitivity: 1v / Pa 1000 Hz) Max SPL: THD ) Capsule: capsule SN Ratio: Sampling rate: Power: Connector: Dimensions: eter, lenght)

Studio-Microphones

Condenser 30Hz - 18kHz Cardioid -32 +/- 2 db (0db = 140 db (at 1 Khz < 1`% 22mm gold diapharms 68 db 16 bit, 48 Khz USB powered USB connector 45 x 185 mm (diam-

[Recording] 04.03.11 22:00

Interfaces Rec ecor ordi or ding di ng UCI-20 D1631

USB Jack Instrument interface

NEW PRODUCT

Special features: • No drivers needed • PC and MAC compatible • Works with all dynamic microphones

The UCI-20 is the most easy solution for instant recording of guitars and bass guitars without having expansive interface’s, drivers problems and setup procedures. Connect the ? TRS Mono plug into your guitar and the USB plug with a PC or MAC and your ready to record. It works with practically all DAW software programs. When the UCI-20 is connected and ready to use the USB connector will light up. It has a sampling rate of 16Bit, 44,1Khz that´s also the standard sample rate of every CD and gives you the quality to make professional recordings. Technical Information Connectors: jack Drivers: Operating system: Vista/Windows 7/ MAC A/D converter: SNR: Signal boost gain: Lenght:

USB & 1/4 TRS mono No drivers needed Windows 2000/ XP/ 16 Bit, 44,1 Khz/48Khz 85dB 22dB 3M

UCI-10 D1630

USB XLR Microphone interface

NEW PRODUCT

Special features: • No drivers needed • PC and MAC compatible • Works with all dynamic microphones

The UCI-10 is the most easy solution for instant recording with all kinds of dynamic microphones without expensive interfaces, difficult drivers and setup procedures. Connect a dynamic microphone with the XLR plug and connect the USB plug with a PC or MAC and you are ready to record. It works with practically all DAW software programs. When the UCI-10 is connected and ready to use the USB connector will light up. It has a sampling rate of 16Bit, 44,1Khz which is the standard sample rate of every CD and gives you the quality to make proffesional recordings. Technical Information Connectors: Drivers: Operating system: Vista/Windows 7/ MAC A/D converter: SNR: Signal boost gain: Lenght:

USB & XLR female No drivers needed Windows 2000/ XP/ 16 Bit, 44,1 Khz/48Khz 85dB 22dB 3M

Interfaces 01_02_DAP_Gear_10_temp2011.indd 107

[Recording]

107 04.03.11 22:00

Interfaces Rec ecor ordi or ding di ng DS-CV1 D1241

USB-Line/Phone Convertor incl software

Analog to Digital music converter & Software • Convert your old vinyl, tapes and CD’s • Add an extra audio output to your computer • USB Powered • Apple MAC & Windows PC Compatible Technical Information Allows for Analog Music Players to be Converted to Digital Media Connect the USB Cable to the USB Port on the Computer (with LED Indication) Record function with Adjustable Volume (+,-) Level Control Audacity Recording Editing Software Included Inputs: Phono, Line input (3.5mm Jack)/ 2 Channel Stereo RCA Audio Output Outputs: Stereo Left/Right 2 Channel Audio Output Dimensions: 65 x 103 x 32 mm (LxWxH)

108 01_02_DAP_Gear_10_temp2011.indd 108

Interfaces

[Recording] 04.03.11 22:00

Studio-monitors Rec ecor ordi or ding di ng Monitor One D3109

40W - Near field monitor Speakerset. This set contains 2 pcs.

The DAP Monitor One is an entry level near field monitor for use in home-recording studios or any other audio-playback and monitoring environment. This unit provides a clear, linear sound reproduction in a smooth, modern designed housing without spending a fortune. Technical Information 2-way passive vented near field monitor speaker system Woofer: 5” Tweeter: 3” cone tweeter Nominal Impedance: 8 Ohm Power Handling: 40 Watt Continuous 80 Watt Program 160 Watt Peak

2,78

185 170 255

5”

Sensitivity (Full Space): 86 dB/W/m Peak SPL at 1 m (Theoretical): 108 dB Dimensions (LxWxH)): 185 x 170-145 x 255-190 mm Net Weight: 2,78 kg

8 Ohm

40W

Active Studio Monitor D3108

The Active Studio Monitor is the active version of the Monitor One. The perfect system for a near field monitor set-up. Technical Information 2-way passive vented near field monitor speaker system Build in Loudness circuits Woofer: 5” Tweeter: 3” cone tweeter Amplifier Output Power: 2x 30 Watt RMS Freq. Response (-3 dB): 45 – 20,000 Hz

150 210 300

5”

Sensitivity (Full Space): 86 dB / W / m Max. SPL at 1 m (Theoretical):100.8 dB Dimensions (LxWxH): 150 x 210 x 300 mm Net Weight: 6 kg

2 x 30W

Studio-monitors 01_02_DAP_Gear_10_temp2011.indd 109

[Recording]

109 04.03.11 22:00

Interior & Acoustics Rec ecor ordi or ding di ng DDS-01 D1395

NEW PRODUCT

DDS-02 Acoustic diffuser screen

The DDS-01 acoustic diffuser screen is an affordable, portable solution for improving the sound of the acoustic space around the microphone. By allowing the sound to pass through several individual layers, the DDS-01 gently diffuses the acoustic waves surrounding the microphone, keeping the sound from bouncing back toward the microphone, which improves the detial and sonic character of your recordings. DDS-01 comes complete with all the accessories to attach the screen to your microphone stand and even use the screen for stereo recording as well.

D1396

Acoustic diffuser screen

DDS-02 is an affordable and useful accessory for recording. This screen will effectively improve the sound of the acoustic space around the microphone and help to record a better dry signal. Even with a budget microphone it is possible to achieve professional recordings due to this acoustic screen. The frame can easily be mounted on the top of a microphone stand and with the included adapter you can fix any microphone clamp on it. It is possible to adjust the length between the microphone and the screen to achieve your desired sound.

Special features: • Affordable but steady model • Adjustiable mic to screen position • Lightweight

ASM-01 D1390

Acoustic black foam, am, 5 cm thick ck

Thickness 5 cm, 2 cm pyramid and 3 cm base 50 x 50 cm tile Fire retardant Black foam

ASM-02 D1391

Acoustic white foam,, 5 cm thick

Thickness 5 cm, 2 cm pyramid and 3 cm base 50 x 50 cm tile Fire retardant White foam

110 01_02_DAP_Gear_10_temp2011.indd 110

ASM-03 D1392

Acoustic black foam, 10 cm thick

Thickness 10 cm, 5 cm pyramid and 5 cm base 50 x 50 cm tile Fire retardant Black foam

DWT-01 Windscreen

DWB-01 Windscreen

For condenser mic. 16 cm diameter 3 cm

D1319 Big size 5 cm diameter, length 9,5 cm

D1318

Interior & Acoustics

[Recording] 04.03.11 22:00

Accessories Rec ecor ordi or ding di ng Microphone holder D1701

mount

44-48 mm black anti shock

NEW PRODUCT

Microphone holder D1702

mount

Microphone holder

44-48 mm Grey anti shock

NEW PRODUCT

D8552

D1704

mount

22-24 mm Grey anti shock

NEW PRODUCT

Nylon pop filter

For microphone stands

Metal pop filter

D1750

D1751

NEW PRODUCT

19 Inch Rack metal

With adjustable Toploading

D8553

Technical Information Dimensions: 550 x 560 x 760mm (LxWxH) Weight: 27,5 kg

With non-adjustable Toploading

Technical Information 16U Dimensions: 540 x 515 x 1040 mm (LxWxH) Weight: 11,3 kg

Accessories 01_02_DAP_Gear_10_temp2011.indd 111

Microphone holder

22-24 mm Black anti shock

NEW PRODUCT

19 Inch Rack metal

mount

Headphone holder D8964

D1703

[Recording]

111 04.03.11 22:01

Entry Level Series Spe peak aker ak erss er MCM-8

MC-Series

Without any doubt one of the most popular speakersystems on the market! The DAP MCSeries is a professional looking speakerseries with an outstanding price/quality relation! The range incorporates a variety of speaker enclosures, each with its own characteristics and field of use. Be sure to check them out and judge for yourself.

D3153

Special features: • Value for money • Entry level Speakercabinet 300 320 430

8,6

MC-8 D3154

Full range cabinet 75W 8 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: MB-8 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 75W Continuous 150W Program 300W Peak Sensitivity (Full Space): 89 dB/W/m Peak SPL at 1 m: 113.8 dB Stand adapter inner Ø: 36 mm Dimensions (LxWxH): 265 x 305 x 490 mm Net Weight: 8,6 kg

8,6

265 305 490

8”

8 Ohm

75W

112 01_02_DAP_Speakers_10_temp2011.indd 112

Sidefill 75W 8 Ohm

Technical Information 2-way passive vented side monitor speaker system Woofer: MB-8 Piezo Tweeter: P-2 Nominal Impedance: 8 Ohm Power Handling: 75 Watt Continuous 150 Watt Program 300 Watt Peak Sensitivity (Full Space): 89 dB / W / m Peak SPL at 1 m (Theoret.): 113.8 dB Stand adapter inner side Ø: 36 mm Dimensions: 300 x 320 x 430 mm (LxWxH) Net Weight: 8,6 kg

MC-10 D3155

Full range cabinet 125W 8 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: MB-10 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 125W Continuous 250W Program 500W Peak Sensitivity (Full Space): 90 dB / W / m Peak SPL at 1 m (Theoret.): 117 dB Stand adapter inner Ø: 36 mm Dimensions (LxWxH): 370 x 265 x 510 mm Net Weight: 10,72 kg

10,72

125W

370 265 510

10”

8 Ohm

8”

8 Ohm

MC-12 D3156

Full range cabinet 200W 8 Ohm

Technical Information 2-way passive vented PA speaker system Woofer: MB-12 Piezo Mid / High Driver: DP-12 Nominal Impedance: 8 Ohm Power Handling: 200W Continuous 400W Program 800W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 121 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 390 x 440 x 650 mm Net Weight: 17,32 kg

17,32

390 440 650

12”

200W

Entry Level Series

8 Ohm

75W

MC-15 D3157

Full range cabinet 250W 8 Ohm

Technical Information 2-way passive vented PA speaker system Woofer: MB-15 Piezo Mid / High Driver: DP-12 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 122 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 440 x 475 x 750 mm Net Weight: 22,38 kg

22,38

440 475 750

15”

8 Ohm

250W

[Speakers] 04.03.11 22:16

Entry Level Series Spe peak aker ak erss er

MCM-15 D3152

Floormonitor 250W 8 Ohm

Technical Information 3-way passive vented monitor speaker system Woofer: MB-15 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 122 dB Dimensions (LxWxH): 525 x 475 x 455 mm Net Weight: 24 kg

525 475 455

15”

8 Ohm

250W

MC-215 D3158

Full range cabinet 500W 4 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: 2x MB-15-4, 4 Ohm each Piezo Mid / High Driver: 1x DP-12 Piezo Tweeter: 3x P-1 Nominal Impedance: 4 Ohm Power Handling: 500W Continuous 1000W Program 2000W Peak Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m (Theoret.): 128 dB Dimensions (LxWxH): 440 x 475 x 1150 mm Net Weight: 34 kg

440 475 1150

15”

4 Ohm

500W

MCB-15 D3159

MCM-12

Subwoofer 250W 8 Ohm

20,38

435 480 555

15”

Floormonitor 200W 8 Ohm

Technical Information 3-way passive vented PA monitor speaker system Nominal Impedance: 8 Ohm Woofer: MB-12 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Power Handling: 200W Continuous 400W Program 800W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 121 dB Dimensions (LxWxH): 520 x 460 x 400 mm Net Weight: 15,66 kg

8 Ohm

15,66

250W

520 460 400

12”

8 Ohm

200W

Entry Level Series 01_02_DAP_Speakers_10_temp2011.indd 113

D3151

Technical Information 15” passive vented subwoofer Woofer: MB-15 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Half Space): 98 dB / W / m Peak SPL at 1 m (Theoret.): 128 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 435 x 480 x 555 mm Net Weight: 20,38 kg

[Speakers]

113 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

Special features: s: • Lightweight • Scratch resistantt ABS housing • Neodymium woofers

PS-108

PS-110 PS-1 PS -110 -1 10

8/1 passive plastic ic ventedd PA speaker spe peak aker er system sys yste tem te m

110/1 0/11 passive 0/ pass pa ssiv ss ivee plastic iv plas pl astiticc vented vent ve nted nt ed PA PA speaker spea sp eake ea kerr system ke syst sy stem st em D3569

D3568

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

7,8

295 230 430

Technical Information Nominal Impedance: Power Handling:

8 Ohm 160 Watt Continuous 320 Watt Program 640 Watt Peak 125 - 20.000 Hz 85 - 22.000 Hz 94 dB / W / m 122 dB 90° x 60° 295 x 230 x 430 mm 7,8 kg

8 Ohm

114 01_02_DAP_Speakers_10_temp2011.indd 114

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

160

10,7

Mobile Road Series

8 Ohm 160 Watt Continuous 320 Watt Program 640 Watt Peak 65 - 20.000 Hz 52 - 22.000 Hz 94 dB / W / m 122 dB 90° x 60° 360 x 270 x 505 mm 10,7 kg

360 270 505

8 Ohm

160

[Speakers] 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

PS-112 PS-1 PS -112 12

12/1.4 passiv passive ivee plastic plas pl astiticc ve vent vented nted ed PPA A sp spea speaker eake ea kerr system ke syst sy stem st em D3570

12,8

420 320 595

8 Ohm

Woofer: Neodymium eodymium

15/1.4 15/ 5/1.4 passive passiv ivee plastic plas pl astiticc vented vent ve nted nt ed PA PA speaker spea sp eake ea kerr system ke syst sy stem st em D357 D3571

Technical Information Nominal Impedance: Power Handling:

8 Ohm 240 Watt Continuous 480 Watt Program 960 Watt Peak 65 - 20.000 Hz 48 - 22.000 Hz 97 dB / W / m 126 dB 90° x 60° 420 x 320 x 595 mm 12,8 kg

12”

PS-115 PS-1 PS -115 15

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

240

16,8

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 115

465 405 690

Woofer: Neodymium

8 Ohm 240 Watt Continuous 480 Watt Program 960 Watt Peak 45 - 20.000 Hz 35 - 22.000 Hz 96 dB / W / m 125.8 dB 90° x 60° 465 x 405 x 690 mm 16,8 kg

15”

[Speakers]

8 Ohm

240

115 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

Special features: eatures: • Bi amped • Line andd Mic input • Neodymium um woofers • Scratch resistant ABS housing • Lightweight

Engineered in The Netherlands!

PS-112A

12/1.4 Active plastic vented PA speaker system D3575

Technical Information Amplifier Power Low: Amplifier Power High: Nominal Input Sensitivity: Maximum Input Signal: Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

17,7

420 320 595

225 Watt RMS in 8 Ohm 150 Watt RMS in 8 Ohm. 0 dBu +12 dBu 65 - 20.000 Hz 48 - 22.000 Hz 97 dB / W / m 123 dB 90° x 60° 420 x 320 x 595 mm 17,7 kg

12”

300W

116 01_02_DAP_Speakers_10_temp2011.indd 116

PS-115A Woofer: Neodymium

15/1.4 Active plastic vented PA speaker system D3576

22,8

Mobile Road Series

465 405 690

Woofer: Neodymium

225 Watt RMS in 8 Ohm 150 Watt RMS in 8 Ohm. 0 dBu +12 dBu 45 - 20.000 Hz 35 - 22.000 Hz 96 dB / W / m 122.8 dB 90° x 60° 465 x 405 x 690 mm 22,8 kg

15”

300W

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Cover for PS-108 D3582

Cover for PS-110 D3583

Cover for PS-112 D3584

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 117

Cover for PS-115 D3585

[Speakers]

117 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

K-112

NEW PRODUCT

2-way fullrange speakersystem 300W 8 Ohm D3551

Technical Information 12/1 passive plastic vented PA speaker system Woofer: 12”, 8 Ohm 63 mm Voice Coil High Driver: 1.375” Titanium Dome, 8 Ohm, 34 mm Voice Coil Nominal Impedance: 8 Ohm Power Handling: 225 Watt Continuous 450 Watt Program 900 Watt Peak Freq. Response (-3 dB): 75 - 15.000 Hz Freq. Range (-10 dB): 60 - 18.000 Hz Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1m (Theoretical): 125.5 dB Nominal Dispersion (HxV): 65° x 65° Dimensions (LxWxH): 430 x 310 x 575 mm Net Weight: 15,52 kg

15,52

430 310 575

12”

8 Ohm

118 01_02_DAP_Speakers_10_temp2011.indd 118

K-112

2-way fullrange speakersystem 300W 8 Ohm D3551

NEW PRODUCT

225W

19,68

Mobile Road Series

450 350 690

15”

8 Ohm

225W

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Speaker Cover for K-112 D7931

Speaker Cover for K-115 D7932

Case for two K-112/K-115 D7580 Technical information:

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 119

[Speakers]

119 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Entertainmer Mobile Set Basic

NEW PRODUCT

D3208

The Entertainer Mobile Set Basic is just like it’s bigger brother but with less inputs and functionality. If you don’t need wireless microphones a CD/DVD player and tuner this set can be at your service and save you some money. It has 4 microphone inputs 2 line inputs by jack, RCA and mini jack this will ensure any input source can be connected. If you got your music on an USB stick than you are good to go because the basic set has an built-in USB MP3 Player. Some handy things about the Entertainer Mobile Set Basic are the 7 band main EQ, internal echo and the possibility to switch the amplifier to 1 x stereo or 2 x mono if you like to use it as main and monitor set-up. The Entertainer Mobile Set Basic is ideal for live jam sessions, presentations, schools and sport instructors.

Special features: • All-in-one lightweight compact set with built-in trolley for easy transportation. • Handy storage compartment for cables and microphones. • Easy to use for non technical users. • Mini jack input connection for mp3 players • Built-in USB MP3 Player.

Speaker adapters included, speaker stands not included! Technical Information 1. 8 Channel signal input, 4 Mic, 2 stereo 2. Independent Tone control for High, Mid and Low 3 band EQ with ±12dB range 3. System 7 band EQ with ±12dB range 4. 16 Echo DSP Presets 5. USB MP3 Player 6. Speakers 2 x 10” woofer + 2 x 1” Titanium Driver Frequency response send: Frequency response output: Output Power: THD: Output Protection:

20 Hz - 20KHz 1dB 45 Hz - 20KHz -3dB Max 2 x 150W, 8 OHM < 1% distortion, overload, shortcircuit thermal Inputting Impedance Mono Channels: 2 K Ohm mic / 33 K Ohm line Inputting Impedance Stereo Channel: 10 K Ohm Distortion: < 0.05%, 20 Hz - 20KHz 1dB Rating Output. S/N Ratio: > 80dB at 1W. “lA” WTD Return Input impedance: 47 K Ohm Max. Input level mic: -14dBu

120 01_02_DAP_Speakers_10_temp2011.indd 120

Max input level line: LED Indications: Connections: Power supply: Accessories:

+15dBu Stereo: +21dBu Signal Level, Power On/Off, Protection & Clipping Line, Mic, Send/Return, Tape output, Aux Send/Return; Foot Switch, Speaker, USB 115V/230V, 50/60Hz (switched) Speaker cables, 35mm speaker adapters, power cable

Mobile Road Series

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Entertainmer Mobile Set Active D3207

The Entertainer set is a truly multifunctional soundsystem which is ideal for presentations, schools, gyms and even mobile DJs. Due to its sturdy and compact design it can fit in any car and is therefore ideal for many mobile applications. Stands NOT included!!!

Special features: • All in one entertainment system • Plug & Play complete active set • Including wireless remote, microphone and beltpack • Powerful 150W 10” speakers • Road-proof ABS housing Technical Information 1. 10 Channel signal input, (2 Wireless Microphones, 4 MIC/LINE, 2 Stereo MP3 Input Connection (3.5mm) 2. Independent Tone control for High, Mid and Low 3 band EQ with ±12dB range 3. System 7 band EQ with ±12dB range 4. DVD/CD Player, compatable DVD/VCD/CD/HDCD/DVD-R/MP3/MPEG4/ Photo viewing, video out (composite, RCA connector) 5. 99 Digital DSP Effects 6. USB Computer Connection Port, Record Output/Input 7. FM/AM Digital Stereo Tuner 8. Output Power 2 x 150W/8ohm, protection on output distortion, overload and short-circuit thermal protection. Switching style power supply, voltage range: 115V/230V, 50/60Hz 9. 2 Crossover speaker system, 2 x 10” woofer + 2 x 1” Titanium Driver 10.Connections: Line Send/Return, Analog Record Output, REV/AUX Send/Return; Foot Switch Control, Video Output 11. LED Indications: Signal Level, Power On/Off, Protection and Clipping

Stands NOT included! See page 170.

Frequency Response: 20 Hz - 20KHz 1dB 45 Hz - 20KHz -3dB Distortion:

Output from Send Max. Output on Speakon

< 0.05%, 20 Hz - 20KHz 1dB Rating Output. S/N Ratio> 80dB at 1W. “lA” WTD

Output Power: 150W / ch Rated Power, 8 OHM, Two channels driving THD < 1% Inputting Impedance (1,2,3,4 Channel: “Wireless Handheld Microphone”, 2 K OHM “Line”33 K OHM Inputting Impedance ( 5-6 / 7-8 Stereo Ch.: 10 K Ohm) Max. Inputting Level MIC: -14dBu LINE:+15dBu Stereo: +21dBu Return Inputting Impedance: 47 K OHM DVD/U Disk Play:

Compactable DVD/VCD/CD/HDCD/ DVD-R/MPEG-4/MP3/ Photo Viewing, MP3, WMA Audio Format 2.0 High-speed Data Transporting

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 121

Digital Stereo Tuner: Receiving Sensitivity: Fuse: Microphone:

Audio Outputting Cables:

Receiving Frequency FM 87.5 108.0MHz AM 522 - 1620KHz FM 12dBpv/m AM +26dBu/m S/N Ratio: FM>46dB AM>34dB Stereo Crosstalk FM > 20dB T4A 250V UHF Wireless Microphone (walking range more than 50 m (Frequency Response: 50Hz-15 KHz +/- 3dB) XLR connection and 1 / 4 “ (6.35 adapter) 2 x 6m

Digital DSP Effects: 99 Effects 24-bit DSP Effect Module USB Computer Connection Port: Analog- Digital, Digital-Analog Switching, 2.0 high-speed data transporting

[Speakers]

121 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er RX-Series The DAP RX series is the upgrade of the popular RW series. The RW series has proven itself for the last 6 years in good quality and reliability. The upgrade from RW to RX takes this series from an entry-level to a professional level. Not only the design has had a total makeover but also the electronics, new cross-over and components have been used for this upgrade. The RX series still has an entry price level but gives you the sound quality of the professional series. The RX series is very suitable for mobile DJ’s and installations in smaller venues and clubs.

18”

15” 12” 10”

Special features: • High driver with 1,375” Titanium Dome • Stylish design with structure paint finish • Engineered in the Netherlands

RX-10 D3311

8 Ohm

Passive 10/1.4” Speaker 160W

Special features: • High driver with 1.375” Titanium Dome • More sound pressure due to new woofer • Engineered in the Netherlands • Only one amplifier needed for a complete set up with 4 subs and 2 tops

RX-12 D3312

8 Ohm

Passive 12/1.4” speaker 240W

Technical information:

Woofer: 10”, 8 Ohm, 50 mm Voice Coil High Driver: 1,375” Titanium Dome, 8 Ohm, 34 mm Voice Coil Power Handling: 160 Watt Continuous 320 Watt Program 640 Watt Peak Freq. Response (-3 dB): 65 - 16.000 Hz Crossover Frequency: 3000 Hz, 12 dB/Oct Sensitivity (Full Space): 94 dB / W / m Peak SPL at 1 m: 122 dB Nominal Dispersion (H x V): 60° x 40°

Woofer:

17,22

411 418 593

10”

122 01_02_DAP_Speakers_10_temp2011.indd 122

High Driver: 8 Ohm, 34 mm Voice Coil Power Handling:

21,2

RX-15 D3313

8 Ohm

Passive 15/1.4” Speaker 240W

Technical information: 12”, 8 Ohm, 65 mm Voice Coil 1,375” Titanium Dome,

240 Watt Continuous 480 Watt Program 960 Watt Peak Freq. Response (-3 dB): 63 - 17.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m (Theoretical): 126 dB Nominal Dispersion (H x V): 90° x 50°

424 482 663

Special features: • High driver with 1,375” Titanium Dome • Better radius due to new woofer • Engineered in the Netherlands • Only one amplifier needed for a complete set up with 4 subs and 2 tops

12”

Woofer:

34 mm Voice Coil 240 Watt Continuous 480 Watt Program 960 Watt Peak Freq. Response (-3 dB): 60Hz - 17.000 Hz Crossover Frequency: 2000 Hz, 12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m (Theoretical): 125.8 dB Nominal Dispersion (H x V): 90° x 50° Power Handling:

26,4

Mobile Road Series

471 529 803

RX-18B D3314

8 Ohm

Passive 18” Subwoofer 300W

Technical information: 15”, 8 Ohm, 65 mm Voice Coil 1,375” Titanium Dome,

High Driver: 8 Ohm,

Special features: • Built-in passive crossover for satellite speakers • Fase invert switch for high output • Internal cross-over by-pass switch • Only one amplifier needed for a complete set up with 4 subs and 2 tops

15”

Woofer: Power Handling:

18”, 75 mm Voice Coil 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 45 - 160 Hz Freq. Range (-10 dB): 38 - 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 101 dB / W / m Peak SPL at 1 m (Theoretical): 131.8 dB Nominal Dispersion (H x V): 360° x 180°

40,6

617 595 762

18”

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Special features: • Bang & Olufsen ICE power amp • Loudness switch with automatic tone control at any sound pressure level. • External speaker output (minimal 8Ohm) • Integrated mixer with tone control • Engineered in the Netherlands

12”

10”

NEW PRODUCT

RX-10A D3315

Active 10/1.4” Speaker

Technical information:

15”

NEW PRODUCT

RX-12A

18”

NEW PRODUCT

RX-15A

RX-18BA

Active 12/1.4” Speaker with B&O D3317 Active 15/1.4” Speaker with B&O D3318 Active 18” Subwoofer with ICE Power Amp Power Amp Power Amp D3316

Technical information:

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

94 dB / 1 Watt / 1 Meter 120.5 dB 60° x 40° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 65 Hz - 18 kHz

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

97 dB / 1 Watt / 1 Meter 123 dB 90° x 50° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 63 Hz - 18 kHz

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

96 dB / 1 Watt / 1 Meter 122.5 dB 90° x 50° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 60 Hz - 18 kHz

Sensitivity (Half Space): 101 dB / 1 Watt / 1 Meter Peak SPL at 1m (theoretical): 127.5 dB Nominal dispersion (HxV): 360° x 180° Amplification: Class-D, Conventional Amplifier power: 450 Wrms, 4 Ohm Frequency response (-3dB): 65 Hz - 16 kHz

Inputs: Tone control:

Line & Mic Bass & Treble

Inputs: Tonecontrol:

Line & Mic Bass & Trebble

Inputs: Tonecontrol:

Line & Mic Bass & Trebble

Power supply: Power consumption:

AC 230 50Hz 540 Watt

Powersupply: Power consumption:

AC 230 50Hz 540 Watt

Powersupply: Power consumption:

AC 230 50Hz 540 Watt

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

27,5

31,8

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 123

Active Subwoofer Wood

Power supply: AC 230-240V - 50/60Hz Maximum power consumption: 540 Watt Stand adapter:

M20 screw

[Speakers]

123 04.03.11 22:17

Multifunctional Series Spe peak aker ak erss er SM-Series

The DAP SM series comprises a range of high-performance loudspeaker cabinets for professional sound reinforcement for short to medium distances. All Tops are equipped with M-10 screws for rigging eyes, metal top hats, build-in handles and 4 stand pods and the 15” and 18” woofers are equipped with steel flange plates for top speaker-tubes. Special features: • Integrated rigging strips • High-Performance short throw cabinet • Suitable as stage monitor due to asymmetric housing

SM-10 MKII D3390

Speakers 1 x 10” + 1.75” HF Driver 200W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 200 Watt Continuous 400 Watt Program 800 Watt Peak Freq. Response (-3 dB): 70 – 17.000 Hz Freq. Range (-10 dB): 55 – 22.000 Hz Crossover Frequency: 2400 Hz, 18 dB/Oct Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m: 124 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 290 x 325 x 520 mm Net Weight: 12,34 kg

12,34

290 325 520

Mounting:

Tophat 35mm, flying strip

Flying Eye 10”

8 Ohm

Available models:

200W

SM-12 MKII D3391

Speakers 1 x 12” + 1.75” HF Driver 250W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 63 – 17.000 Hz Freq. Range (-10 dB): 50 – 22.000 Hz Crossover Frequency: 2200 Hz, 12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m: 126 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 400 x 350 x 640 mm Net Weight: 22,4 kg

22,4

SM-15 MKII

400 350 640

12”

8 Ohm

124 01_02_DAP_Speakers_10_temp2011.indd 124

Mounting:

250W

D3392

Tophat 35mm, flying strip

D8418

Big

D8428

Small

Speakers 1 x 15” + 1.75” HF Driver 300W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 55 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m: 127.8 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 460 x 400 x 710 mm Net Weight: 28 kg

Multifunctional Series

460 400 710

15”

8 Ohm

Mounting:

Tophat 35mm, flying strip

300W

[Speakers] 04.03.11 22:18

Multifunctional Series Spe peak aker ak erss er

CX-6

D3339

6.5/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 120 Watt Continuous 240 Watt Program 480 Watt Peak Freq. Response (-3 dB): 50 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 12-18 dB/Oct Sensitivity (Full Space): 91 dB/W/m Peak SPL at 1 m: 117.8 dB (Theoretical) Nominal Dispersion: 90° Conical Dimensions (LxWxH): 220 x 214 x 295 mm Net Weight: 6 kg

CX-8

D3340

8/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 120 Watt Continuous 240 Watt Program 480 Watt Peak Freq. Response (-3 dB): 50 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 12-18 dB/Oct Sensitivity (Full Space): 93 dB/W/m Peak SPL at 1 m: 119.8 dB (Theoretical) Nominal Dispersion: 90° Conical Dimensions (LxWxH): 260 x 249 x 330 mm Net Weight: 8,36 kg

8,36

260 249 330

8”

8 Ohm

Special features: • Uniform sound distribution • Brackets included • Zero phase shift due to coaxial speaker • Warm sound at low level • Ideal as monitor or fixed installation speaker

CX-10 D3341

10/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 200 Watt Continuous 400 Watt Program 800 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1800 Hz, 12-18 dB/Oct Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m: 124 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 310 x 329 x 420 mm Net Weight: 14,4 kg

14,4

310 329 420

10”

8 Ohm

Coaxial-Series

DAP Audio added a complete new range of speakers to its already wide range. The CX-range is the latest addition and features a complete range of coaxial speakers. The coaxial speakers are ideal for monitor use as well as fixed installation. Due to the coaxial speaker the CX-range has hardly any phase-shift. They also give the performer more freedom of movement than normally allowed by conventional horn loaded speakers. Due to the compact structure of the cabinets, the CX-range will fit in every interior or on every stage.

CX-12 D3342

12/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1800 Hz, 18-12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m: 126 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 370 x 375 x 485 mm Net Weight: 16,82 kg

16,82

370 375 485

Multifunctional Series 01_02_DAP_Speakers_10_temp2011.indd 125

12”

8 Ohm

[Speakers]

CX-15 D3343

15/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1700 Hz, 12-18 dB/oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m: 127.8 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 465 x 438 x 600 mm Net Weight: 26,72 kg

26,72

465 438 600

15”

8 Ohm

125 04.03.11 22:18

High Grade Series Spe peak aker ak erss er X-Series Passive

The DAP X-Series is a collection of professional high quality loudspeaker systems which are designed and developed by the DAP Audio R&D department in the Netherlands. Special attention is given to the transducers, high drivers, horn flares and passive crossovers, which will result in a wide coverage of the audience, optimal off-axis response (no mid dip) and optimal throw. The result is higher power handling capacity, high efficiency and a very wide and smooth frequency response at any listening position. All the transducers have optimized Thiele Small Parameters and the high drivers have a very high efficiency which gives the freedom of more power handling capacity, usage of high frequency correction and a transparent sound at the highest frequencies.

DAP X-Series

smooth frequency response at any listening position. All the transducers have optimized Thiele Small Parameters and the high drivers have a very high efficiency which gives the freedom of more power handling capacity, usage of high frequency correction and a transparent sound at the highest frequencies.

DAP X-Series components Premium grade Crossover

126 01_02_DAP_Speakers_10_temp2011.indd 126

High Qualtity HF-drivers

HF-horn

High Grade Series

LF-driver

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

X-10

D3290

10”/1,75” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity (250 Watt), high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 1.75” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 15 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

X-12

D3291

12”/1,75” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 1.75” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

X-12T D3292

X-15

12”/2” Top Cabinet

D3293

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 2” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

15”/2” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 2” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

8 Ohm 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 53 – 16.000 Hz Freq. Range (-10 dB): 64 – 20.000 Hz Crossover Frequency: 3300 Hz, 18 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1m (Theoretical):126 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 310 x 310 x 610 mm Net Weight: 16,5 kg

8 Ohm 350 Watt Continuous 700 Watt Program 1400 Watt Peak Freq. Response (-3 dB): 60 – 16.000 Hz Freq. Range (-10 dB): 48 – 20.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1m (Theoretical):128.5 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 410 x 410 x 710 mm Net Weight: 25 kg

8 Ohm 450 Watt Continuous 900 Watt Program 1800 Watt Peak Freq. Response (-3 dB): 80 – 16.000 Hz Freq. Range (-10 dB): 60 – 20.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 99 dB/W/m Peak SPL at 1m (Theoretical):131.5 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 375 x 370 x 710 mm Net Weight: 26,5 kg

8 Ohm 500 Watt Continuous 1000 Watt Program 2000 Watt Peak Freq. Response (-3 dB): 55 – 16.000 Hz Freq. Range (-10 dB): 45 – 20.000 Hz Crossover Frequency: 1700 Hz, 18 dB/Oct Sensitivity (Full Space): 99 dB/W/m Peak SPL at 1m (Theoretical):132 dB Nominal Dispersion (HxV): 75° x 50° Dimensions (LxWxH): 480 x 480 x 810 mm Net Weight: 35 kg

Special features: • Briljant and natural sound quality • Optimised gain before feedback • Advanced 18dB crossover • Road proof 15mm plywood cabinet

Special features: • Briljant and natural sound quality • Optimised gain before feedback • Advanced 18dB crossover • Road proof 18mm plywood cabinet

Special features: • Briljant and natural sound quality • Long/Medium throw switch • Advanced 18dB crossover • Road proof 18mm plywood cabinet

16,5

310 310 610

10”

8 Ohm

410 410 710

12”

8 Ohm

26,5

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 127

375 370 710

12”

[Speakers]

8 Ohm

480 480 810

15”

8 Ohm

127 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

X-12M D3297

X-15B D3294

15” Subwoofer

X-15HL

X18B

Compact 15” horn loaded subwoofer design for a very high efficiency and still deep bass response until 38 Hz. Ideal for building or extending actively channelled PA systems • Very high power handling capacity of 600 Watt RMS. • Special 15” transducer with a 4” voice coil and a long cone excursion for minimal distortion at full power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers).

Special 18” subwoofer with a 4” voice coil and a long cone excursion for minimal distortion at full power and high efficiency and high power handling capacity (600 Watt). • Large wooden vent for minimal noise. • Optimal Q-load for a very smooth and deep frequency response. • Switchable active/passive crossover usage. (No disassembly of the passive crossover needed) • Phase reverse switch for the satellite system for maximum sound pressure with less power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers).

D3296

Special 15” subwoofer with a 3” voice coil and a long cone excursion for minimal distortion at full power. • High efficiency and high power handling capacity (400 Watt). • Large wooden vent for minimal noise. • Optimal Q-load for a very smooth and deep frequency response. • Switchable active/passive crossover usage. (No disassembly of the passive crossover needed) • Phase reverse switch for the satellite system for maximum sound pressure with less power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

15” Hornloaded Subwoofer

D3295

18” Subwoofer

8 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak Freq. Response (-3 dB): 42 – 160 Hz Freq. Range (-10 dB): 35 – 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 103 dB/W/m Peak SPL at 1m (Theoretical):135 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 500 x 600 x 710 mm Net Weight: 36 kg

Technical Information Nominal Impedance: Power Handling:

8 Ohm 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Response (-3 dB): 42 – 130 Hz Freq. Range (-10 dB): 38 – 130 Hz Sensitivity (Half Space): 106 dB/W/m Peak SPL at 1m (Theoretical):139.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 600 x 810 mm Net Weight: 60 kg

Technical Information 18” passive vented subwoofer Active/Passive Filter Switch Woofer Normal/Inverted Switch High Out Woofer: ER-1899L , 8 Ohm, 100 mm Voice Coil Nominal Impedance: 8 Ohm Power Handling: 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Response (-3 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 104 dB/W/m Peak SPL at 1m (Theoretical): 137.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 600 x 760 mm Net Weight: 49 kg

Special features: • Advanced transducer cooling system enables high power handling • Cross-over bypass switch • High pass filtered output with phase switch • Only one amplifier needed for a complete set up with 4 subs and 2 tops • Road proof 18mm plywood cabinet

Special features: Advanced transducer cooling system enables high power handling • Long excursion subwoofer • Road proof 18mm plywood cabinet

500 600 710

15”

8 Ohm

128 01_02_DAP_Speakers_10_temp2011.indd 128

600 600 810

15”

8 Ohm

High Grade Series

600 600 760

18”

8 Ohm

Floor Monitor, 350W

Floor monitor for pure sound quality with low feedback tendency. • High power handling capacity (350 Watt), high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 12/12 dB/octave passive crossover sections with passive high frequency limiter and optimal phase response. • Advanced transducer cooling system for higher power handling capacity. • Very high efficient 1” exit 1.75” voice coil high drivers with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Special ribbon cone for a smooth mid-frequency response. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

8 Ohm 350 Watt Continuous 700 Watt Program 1400 Watt Peak Freq. Response (-3 dB): 60 – 16.000 Hz Freq. Range (-10 dB): 48 – 20.000 Hz Crossover Frequency: 2000 Hz, 12 dB/Oct Sensitivity (Full Space): 97 dB/W/m Peak SPL at 1m (Theoretical):128.5 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 665 x 375 x 390 mm Net Weight: 23 kg

Special features: • Optimised gain before feedback • Advanced 18dB crossover • Road proof 18mm plywood cabinet

665 375 390

12”

8 Ohm

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Features:

X-Series Active

DAP audio has set the new high quality sound standard with the X-series speakers. Now the whole X-series speaker range have also become active with the addition of the new light weight amplifier systems and switch mode power supply (SMPS). The benefits are: • Easy handling and setup. No power amplifiers needed. • Build in light weight amplifier module of only 3.5 kg. • Flexible use and expanding capabilities. • Only slightly larger cabinets, compared with the passive versions.

• Build in Class-D amplifier for the low speaker to get a very high efficiency, up to 90% • Build in Class-AB amplifier for the high driver to get an optimal sound quality. • Multiband limiting for optimal sound quality at any level and optimal protection. • User adjustable crossover frequency setting from 60 – 250 Hz. • Build in subsonic filters for optimal speaker protection. • Loudness switch for automatically extended low frequencies performance, especially in case of small events or for background music. • Auxiliary output for use with amplifiers and passive speakers, or use with other kinds of active speaker systems. • Phase switch at the subwoofers. • Ground lift switch to eliminate hum in ground loop situations.

The Active X-series Loudspeakers have the same high quality components as his passive brothers. The internal processing and the two amplifiers build in the 2-way speaker cabinets makes it also possible to get an optimal and smooth frequency response.

X-10A D3251

1,75”

Active Fullrange Speaker 10”,

X-12A D3252

1,75”

Active Fullrange Speaker 12”,

Special features: • Neutrik Powercon input & link output • Engineered in the Netherlands • Built-in Class-D amplifier • Output with active low pass filter

X-12TA D3259

Active Mid/High Speaker 12”, 2”

X-15A D3253

Active Fullrange Speaker 15”, 2”

Technical Information 10/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Build In Subsonic Filter Multiband Limiters

Technical Information 12/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Technical Information 15/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Amplifier Output Power Low: Amplifier Output Power High: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency: Adjustable Crossover Freq:

200 Watt RMS 100 Watt RMS 75 – 17.000 Hz 60 – 22.000 Hz 2200 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 95 dB / W / m Max. SPL at 1m (Theoretical): 119.8 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 310 x 380 x 600 mm Net Weight: 20,5 kg

200 Watt RMS 100 Watt RMS 60 – 16.000 Hz 42 – 20.000 Hz 2000 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 97 dB / W / m Max. SPL at 1m (Theoretical): 121.8 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 410 x 480 x 700 mm Net Weight: 28,4 kg

400 Watt RMS 100 Watt RMS 70 – 16.000 Hz 60 – 20.000 Hz 1900 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 99 dB / W / m Max. SPL at 1m (Theoretical): 126 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 370 x 400 x 700 mm Net Weight: 28,5 kg

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 129

[Speakers]

400 Watt RMS 100 Watt RMS 42 – 16.000 Hz 36 – 20.000 Hz 1700 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 99 dB / W / m Max. SPL at 1m (Theoretical): 126 dB Nominal Dispersion (HxV): 90° x 50° Dimensions (LxWxH): 480 x 570 x 800 mm Net Weight: 38,5 kg

129 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Special features: • Neutrik Powercon input & link output • Engineered in the Netherlands • Built-in Class-D amplifier • Output with active high pass filter

X-15BA D3254

Active Sub/Bass Speaker 15”

• Lightweight switched mode power supply. • Separate amplifiers for mid and high speakers. • Active 2 way crossover network. • User adjustable crossover frequency 60Hz-250Hz/24dB.Oct. • Multiband limiter circuit for optimal tone balance and sound pressure level. • Loudness switch for enhanced low frequency response. • Groundloop switch. • Extra low frequency balanced output.

X-15HLA

Active Hornloaded Sub/Bass Speaker 15” D3256

• Lightweight amplifier and power supply • Fully 2 way active crossover inside • User variable crossover frequency from 60 – 250 Hz, 24 dB/oct • Auxilary High Out for other active full range speaker systems • Built-in Subsonic filter to prevent amplifier power waste and protection of the speaker • Clip Limiter • Loudness switch for enhanced low frequency response • Phase switch • Groundloop switch

X-18BA

X-12MA

1,75”

D3255

Active Sub/Bass Speaker 18”

D3258

Active Monitor Speaker 12”,

• Lightweight amplifier and power supply • Two amplifiers for low/mid and high speaker • Fully 2/3 way active crossover inside • User variable crossover frequency from 60 – 250 Hz, 24 dB/oct • Auxilary Low Out for other active subwoofers or amplifiers with passive subwoofers. No external crossover needed • Built-in Subsonic filter to prevent amplifier power waste and protection of the speaker • Multiband limiter circuit for optimal tone balance at any sound pressure level • Loudness switch for enhanced low frequency response. No subwoofer need for small gigs • Groundloop switch

Technical Information 15” Active Vented PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 15” Active Horn Loaded PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 18” Active Vented PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 12/1 Active Vented PA Monitor Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Amplifier Output Power Low: Freq. Response (-3, -6 dB): Freq. Range (-10 dB): Adjustable Crossover Freq:

Amplifier Output Power Low: Amplifier Output Power High: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency: Adjustable Crossover Freq:

400 Watt RMS 38 – 250 Hz 32 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1m (Theoretical): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 500 x 690 x 700 mm Net Weight: 39.5 kg

130 01_02_DAP_Speakers_10_temp2011.indd 130

600 Watt RMS 38 – 250 Hz 32 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 106 dB / W / m Max. SPL at 1m (Theoretical): 133.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 810 x 790 mm Net Weight: 70 kg

600 Watt RMS 35 – 250 Hz 30 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 104 dB / W / m Max. SPL at 1m (Theoretical): 131.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 690 x 750 mm Net Weight: 50,5 kg

High Grade Series

200 Watt RMS 100 Watt RMS 60 – 16.000 Hz 42 – 20.000 Hz 2000 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 97 dB / W / m Max. SPL at 1m (Theoretical): 121.8 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 680 x 400 x 380 mm Net Weight: 26,4 kg

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Protection Covers for X-Series X-series protection covers are high quality covers with openings for the handles, connection plate and speaker stand adapter. It is made of durable padded fabric to ensure good protection for your speakers during transport. It also has a handy transparent label holder. The front of this cover has a zipper so it is possible to keep the speaker in the cover during performance if necessary.

Special features: • Durable padded fabric • Transparant label holder • Handy openings for connections and stand adapter • Possibility to keep speaker inside cover during performance

NEW PRODUCT

Protection cover for X-10 D3320

NEW PRODUCT

Cover for X-15B D3324

NEW PRODUCT

Multifunctional Cover for X-12 D3321

NEW PRODUCT

Cover for X-15HL D3325

NEW PRODUCT

Multifunctional Cover for X-12T D3322

D3323

NEW PRODUCT

Cover for X-18B D3326

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 131

NEW PRODUCT

Multifunctional Cover for X-15

[Speakers]

131 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

8” 6,5”

12” Special features: • Compact • HiFi Sound Quality • Adjustable subwoofer level • Fase invert switch • Including speaker cables

Special features: • Compact & Powerfull • Improved Sound Quality • Adjustable subwoofer level • Fase invert switch • Including speaker cables

15”

Club Mate Series • High Power, Long Excursion 12 and 15 inch subwoofer speaker units. • Special mid speaker unit with a very high efficiency. • Special High Drivers and Elliptical Wave Guide for frequencies up to 20 KHz. • All amplifiers and electronics are build in the subwoofer cabinet. • Build in dynamic compressor and limiter circuits for optimal protection and low distortion • Build in Subsonic Filter for optimal subwoofer protection. • Build in High Driver Protection.

Club Mate 12 D3232

Club Mate 15

12” Active Speaker Set

Technical Information Subwoofer: 12” compact vented active PA subwoofer Amplifier Output Low:

350 Watt RMS in 8 Ohm Amplifier Output High: 2x 120 Watt RMS in 8 Ohm Freq. Response (-3 dB): 50 – 125 Hz Crossover Freq.: 125 Hz, 24 dB/ Oct BW Input Sensitivity: 0 dBu, 775 mV Efficiency (Half Space): 100 dB / W / m Max. SPL at 1 m (Theoret.): 125.4 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (WxHxD): 452 x 515 x 603 mm Net Weight: 36 kg Satellites: 6.5/1” passive vented PA satellite speaker system . Freq. Response (-3 dB): 125 – 20,000 Hz Crossover Freq.: 2700 Hz, 12 dB/ Oct LR

132 01_02_DAP_Speakers_10_temp2011.indd 132

• Excellent Stereo Image. • 13-layers plywood for the subwoofer, MDF for the satellites for optimal suppression of internal resonances. • Special High Driver with Neodymium magnet and Metalized Poly Carbonate Dome for a very smooth Frequency Response up to 20 kHz.

D3233

Efficiency (Full Space):

95 dB / W / m

Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

115.8 dB 90° x 60° 240 x 340 x 245 mm 9 kg

Optional:

Speaker stands (D8401), 6 m Speakon cables (FS046, FS176, or FS186)

15” Active Speaker Set

Technical Information Subwoofer: 15” compact vented active PA Subwoofer Amplifier Output Low:

400 Watt RMS in 8 Ohm Amplifier Output High: 2x 150 Watt RMS in 8 Ohm Freq. Response (-3 dB): 44 – 125 Hz Crossover Freq.: 125 Hz, 24 dB/ Oct BW Input Sensitivity: 0 dBu, 775 mV Efficiency (Half Space): 103 dB / W / m Max. SPL at 1 m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (WxHxD): 503 x 605 x 705mm Net Weight: 46 kg

Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

116.8 dB 90° x 60° 264 x 432 x 253mm 9 kg

Optional:

Speaker stands (D8401), 6 m Speakon cables (FS046, FS176, or FS186)

Satellites: 8/1” passive vented PA Satellite speaker system Freq. Response (-3 dB): Crossover Freq.: Efficiency (Full Space):

High Grade Series

125 – 20,000 Hz 2700 Hz, 12 dB/Oct LR 95 dB / W / m

[Speakers] 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

• Engineered in EU

NEW PRODUCT

Castorboard for Club-Mate 12

Castorboard for Club-Mate 15

Make your transport of the clubmate 12 easy with this castor board. Of course you can use it for many other transportations but it will perfectly fit the 12” clubmate sub.

Make your transport of the clubmate 15 easy with this castor board. Of course you can use it for many other transportations but it will perfectly fit the 15” clubmate sub.

D3234

Technical Information Measurements: 150 x 600 x 450 mm (HxWxD) Weight: 7.00Kg Wheels: Blue wheels 100mm (2 swivel, 2 including brake)

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 133

[Speakers]

D3235

Technical Information Measurements: 150 x 700 x 500 mm (HxWxD) Weight: 7.50Kg Wheels: Blue wheels 100mm (2 swivel, 2 including brake)

133 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

Special features: • Plug & Play’ complete active DJ set • HiFi Sound Quality • including Transport covers • Amplifier unit in bascabinet • Adjustable subwoofer level

SoundMate Active 2 MK-II D3221

Complete Ready-to-Use set

Easy transportable high quality sound system for DJ’s and bands. Bass and satellite amplifiers are built into the subwoofer. Specially designed high power 15” subwoofer system with 3” voice coil for handling frequencies down to 38 Hz. Light weight satellite cabinets with 10” high efficiency mid speaker with 2” voice coil. 1” exit, 1.75” voice coil high driver mounted on a natural constant directivity horn. Cabinets 18 mm plywood (12 layers). colour Black.

Technical Information Subwoofer: 15” active vented PA subwoofer Built-in Limiter circuits Built-in Loudness circuits Amplifier Output Power Low: 400 Watt RMS Amplifier Output Power High: 200 Watt RMS in 8 Ohm Freq. Resp. (-3 dB, -6 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency: 160 Hz, 24 dB/oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 840 x 710 x 500 mm Net Weight: 55 kg

10/1 passive vented PA satellite speaker system Nominal Impedance: Freq. Resp. (-6 dB, -3 dB): Freq. Range (-10 dB): Crossover Frequency: Sensitivity (Full Space): Max. SPL at 1m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

8 Ohm 160 – 16,000 Hz 125 – 20,000 Hz 3300 Hz, 18 dB/oct 97 dB / W / m 120 dB 90° x 60° 300 x 610 x 300 mm 15,5 kg

Satellite:

• Incl. 3 transport covers • 2 Speaker Cables • 2 Distance Tubes • 8 Castor Wheels

134 01_02_DAP_Speakers_10_temp2011.indd 134

High Grade Series

[Speakers] 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

Special features: • Plug & Play’ complete active Live set • High SPL output • including Transport covers • Every cabinet has its own amplifier

SoundMate Active 3 MK-II D3222

Complete Ready-to-Use set

Easy transportable high power and high quality sound system for DJ’s and bands. Easy stackable for maximum stability. Each cabinet has its own built-in amplifier, processor, limiter and crossover section. Specially designed subwoofer system with 15” high power subwoofer with 3” voice coil for handling frequencies down to 38 Hz. 12” high efficiency mid speaker with 3” voice coil and high driver with 1” exit, 2” voice coil mounted on a constant directivity horn. Cabinets 18 mm plywood (12 layers). colour Black. • Incl. transport covers • 16 Castor Wheels The satellite: The Soundmate 3 satellite is designed to produce a full spectrum of sound. The satellite is equipped with a 12” LF loudspeaker and 1” HF driver with a horn with a dispersion of 60°x60°. The built-in amplifiers deliver 600W of pure sound.

Technical Information Subwoofer: 15” active vented PA subwoofer Built-in Limiter circuits Built-in Loudness circuits Amplifier Output Power: 400 Watt RMS Freq. Resp. (-3 dB, -6 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency: 160 Hz, 24 dB/oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1 m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 840 x 710 x 500 mm Net Weight: 55 kg

Freq. Resp. (-6 dB, -3 dB): Freq. Range (-10 dB): Crossover Frequency: Sensitivity (Full Space): Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

160–16,000 Hz 125–20,000 Hz 2000 Hz, 18 dB/oct 99 dB / W / m 125 dB 60° x 40° 480 x 710 x 370 mm 37 kg

Satellite: 12/1 passive vented PA satellite speaker system Built-in Limiter circuits Amplifier Output Power: 400 Watt RMS in 8 Ohm

The subwoofer: Feel the bass with this 15” basscabinet. The cabinet is powered through a powerful 600W amplifier. The castors makes the unit easy to move and thanks to this feature it is a real roadproof system and is it even suitable to carry a satellite cabinet.

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 135

[Speakers]

135 04.03.11 22:19

Touring Series Spe peak aker ak erss er Special features: • Extreme high power handling • Engineered in the Netherlands • Advanced High-driver protection circuit • Switches to disable x-over and enable bi-amping • Interlock system for transport trolley and safe stacking

LT-Series Passive

DAP audio is proud to introduce the new DAP LT Speaker Series. These speakers are developed in the Netherlands to meet the latest European Sound Standards. These LT Series Speakers are made for almost any kind of events. Special attention is given at the easy handling of these speaker systems as well as less use of equalization. The benefits are: • Long Linear Excursion Subwoofer Speakers with Multiple Layer Voice Coils for very high power handling, less power compression and also extended low frequency response. • Very High Efficiency • Extreme High Power Handling • A 1.5” Hornflare with added phase plug for a higher and smoother frequency response. • A 1.5” High Driver with a 3” Voice Coil and a Poly Carbonate Dome • Low Power Compression • ‘d Apollito configuration for a very flat frequency response • Optimal phase response at the higher frequencies • Optimal Off-axis response

2x18”

2x15”

Al the low speakers are made with Aluminum Die Cast Frames and have optimized Thiele Small Parameters to get the highest efficiency and power handling possible.

2x12”

Features: • New style grille • Highly Advanced High Driver Limiter. No switch off of the High Driver • Up to 16 handgrips for easy handling • Highly Advanced Passive Crossover Sections build in.

LT-212 D3480

D3482 D3481

2 x 12” Long Throw Speaker

• High performance fullrange enclosure • 2 high power 12 inch drivers • 3 inch compression driver • Strong metal handles • Multiple flying system • Interlock system for safe ground stacking • Ideal in combination with the X-218B and X-18HL Technical Information Double 12/1.5 Vented d’Appollito PA Speaker System Active / Passive Filter Switch 6 Metal Handgrips Nominal Impedance: 4 Ohm Power Handling: 900 Watt Continuous 1800 Watt Program 3600 Watt Peak Freq. Resp. (-3 dB): 66 – 15.000 Hz Freq. Range (-10 dB): 55 – 18.000 Hz Crossover Freq.: 1700 Hz, 18 dB/Oct Sensitivity (Full Space): 101 dB / W / m

D34 D3480

490 490 1090

Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

Transport Trolley D3490

2x12”

4 Ohm

900W

LT-215

LT-218B

• High performance fullrange enclosure • 2 high power 15 inch drivers • 3 inch compression driver • Strong metal handles • Multiple flying system • Interlock system for safe ground stacking • Ideal in combination with the X-218B and X-18HL

• High performance sub/bass enclosure • 2 high power 18 inch drivers • Strong metal handles • Interlock system for safe ground stacking • Ideal in combination with the LT-212B and LT-215 • Standadapter with 22 mm screw

D3481

2 x 15” Long Throw Speaker

Technical Information Double 15/1.5 Vented d’Appollito PA Speaker System Active / Passive Filter Switch 6 Metal Handgrips Nominal Impedance: Power Handling: Freq. Resp. (-3 dB): Freq. Range (-10 dB): Crossover Freq.:

510 490 1230

4 Ohm 1000 Watt Continuous 2000 Watt Program 4000 Watt Peak 56 – 15.000 Hz 42 – 18.000 Hz 1700 Hz, 18 dB/Oct

D3482

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

102 dB / W / m 138 dB (Theoretical) 60° x 40° 510 x 490 x 1230 mm 61 kg

2x15”

4 Ohm

136 01_02_DAP_Speakers_10_temp2011.indd 136

1000W

For LT-215

For LT-212

2 x 18” Bass Speaker

Technical Information Double 18” Passive Vented PA Subwoofer 6 Metal Handgrips 3x M20 Stand Bases Woofer: ER-1899L-C, 8 Ohm, 100 mm 4L Voice Coil Nominal Impedance: 4 Ohm Power Handling: 1600 Watt Continuous 3200 Watt Program 6400 Watt Peak

Transport Trolley D3491

136.5 dB (Theoretical) 60° x 40° 490 x 490 x 1090 mm 50 kg

Touring Series

650 650 1220

Freq. Resp. (-3 dB): Freq. Range (-10 dB): Sensitivity (Half Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

32 – 125 Hz 26 – 245 Hz 106 dB / W / m 144 dB (Theoretical) 360° x 180° 650 x 650 x 1220 mm 81 kg

Transport Trolley D3492

2x18”

4 Ohm

1600W

For LT-218B

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er LT-15HL D3483

15” Horn Loaded Bass Speaker

• High performance horn loaded Bass speaker • 1 high power 15 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw Technical Information 15” Passive Horn Loaded PA Subwoofer 4 Metal Handgrips 1x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Resp. (-3 dB): 42 – 130 Hz Freq. Range (-10 dB): 38 – 130 Hz

600 600 810

Sensitivity (Half Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

106 dB / W / m 139.8 dB (Theoretical) 360° x 180° 600 x 600 x 810 mm 60 kg

Transport Trolley D3493

15”

8 Ohm

600W

For LT-15HL

1x15” Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Most allround compact HL Sub • Ergonomic placed handgrips for easy handling

LT-18HL D3484

18” Horn Loaded Bass Speaker

• High performance horn loaded Sub/Bass enclosure • 1 high power 18 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw

1x18” Technical Information 18” Passive Horn Loaded PA Subwoofer 16 Metal Handgrips 1x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 800 Watt Continuous 1600 Watt Program 3200 Watt Peak Freq. Response (-3 dB): 38 – 400 Hz Freq. Range (-10 dB): 28 – 800 Hz

640 770 1240

Sensitivity (Half Space): 108 dB / W / m Peak SPL at 1 m (Theoretical): 143 dB Nominal Dispersion (HxV):360° x 180° Dimensions (LxWxH): 640 x 770 x 1240mm Net Weight: 85 kg

Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Very high Sound Pressure HL Sub • Ergonomic placed handgrips for easy handling

Transport Trolley D3494

18”

8 Ohm

800W

For LT-18HL

LT-21HL D3485

21” Horn Loaded Bass Speaker

• High performance horn loaded • Sub/Bass enclosure • 1 high power 21 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw

1x21”

Technical Information 21” Passive Horn Loaded PA Subwoofer 16 Metal Handgrips 1 x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 1000 Watt Continuous 2000 Watt Program 4000 Watt Peak Freq. Response (-3 dB): 30 – 130 Hz Freq. Range (-10 dB): 22 – 130 Hz

640 810 1330

Sensitivity (Half Space): 108 dB / W / m Peak SPL at 1 m (Theoretical): 144 dB Nominal Dispersion (HxV):360° x 180° Dimensions (LxWxH): 640 x 810 x 1330mm Net Weight: 96 kg

Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Ultra low infra Subwoofer • Ergonomic placed handgrips for easy handling

Transport Trolley D3495

21”

8 Ohm

1000W

For LT-21HL

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 137

[Speakers]

137 04.03.11 22:19

Touring Series Spe peak aker ak erss er Special features: • Bang & Olufson Amp with DSP presets • Engineered in the Netherlands • Neutrik Powerkon In + Out • Build in Active Crossover with low pass output • Configurable dynamics by RS-485 interface

LT-212A • • • •

Engineered in EU Built-in DSP Bang & Olufsen / ICE-Power Amplifier inside

Active Speaker with processing D3473

• 12/1.5” Active 2-way d’Appolito Speaker System • 16 presets directly available • 6 Metal Handgrips Technical Information Amplifier Module Low: B&O ICEpower 1000ASP Amplifier Module High: B&O ICEpower 500A Amplifier Output Low: 1000 Watt RMS in 4 Ohm Amplifier Output High: 500 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 66 – 15,000 Hz

470 470 1090

12”/1,5”

Freq. Range (-10 dB): 55 – 18,000 Hz Sensitivity (Full Space): 101 dB / W / m Max. SPL at 1 m (Theoret.): 132 dB Nom. Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 470 x 470 x 1090 mm Net Weight: 52 kg

1500W

LT-215A

Active Speaker with processing D3474

• 15/1.5” Active 2-way d’Appolito Speaker System • 16 presets directly available • 6 Metal Handgrips

• • • •

138 01_02_DAP_Speakers_10_temp2011.indd 138

Engineered in EU Built-in DSP Bang & Olufsen / ICE-Power Amplifier inside

Technical Information Amplifier Module Low: B&O ICE power1000ASP Amplifier Module High: B&O ICE power500A Amplifier Output Low: 1000 Watt RMS in 4 Ohm Amplifier Output High: 500 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 56 – 15,000 Hz

Touring Series

490 510 1230

15”/1,5”

Freq. Range (-10 dB): 42 – 18,000 Hz Sensitivity (Full Space): 102 dB / W / m Max. SPL at 1 m (Theoret.):133 dB Nom. Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 490 x 510 x 1230 mm Net Weight: 63 kg

1500W

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er LT-218BA

Active Speaker with processing D3477

• Double 18” Active Vented Subwoofer Speaker System • 16 presets directly available • 8 Metal Handgrips Technical Information Amplifier Module Low 1:

B&O ICEpower 1000ASP B&O ICEpower 1000A Amplifier Output Low 1: 1000 Watt RMS in 4 Ohm Amplifier Output Low 2: 1000 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu XLR High Out: +6 dBu at +0 dBu Input. Amplifier Module Low 2:

650 650 1220

18”

DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 32 – Fh Hz Freq. Range (-10 dB): 26 – Fh Hz Sensitivity (Half Space): 106 dB / W / m Max. SPL at 1 m (Theoret.): 139 dB Nom. Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 650 x 650 x 1220 mm Net Weight: 81 kg

2000W

LT-18HLA

LT-15HLA

Active Speaker with processing

D3475

D3476

• 18” Active Horn Loaded Subwoofer Speaker System • 16 presets directly available • 16 Metal Handgrips

• 15” Active Horn Loaded Subwoofer Speaker System • 16 presets directly available • 4 Metal Handgrips

Technical Information Amplifier Module Low: Amplifier Output Low: Damping factor at 100 Hz: Input Sensitivity: XLR High Out: DSP: Freq. Response (-3 dB): Freq. Range (-10 dB):

600 600 810

B&O ICEpower 1000ASP 1000 Watt RMS in 4 Ohm > 2000 in 8 Ohm 0 dBu +6 dBu at +0 dBu Input. Marani Dig Amp DSP 38 – Fh Hz 34 – Fh Hz

15”

• Engineered in EU • Built-in DSP • Bang & Olufsen / ICE-Power

1000W

Sensitivity (Half Space): Max. SPL at 1 m (Theoret.): Nom. Dispersion (HxV): Dimensions (LxWxH):

106 dB / W / m 136 dB 360° x 180° 600 x 600 x 810 mm

Technical Information Amplifier Module Low 1: Amplifier Module Low 2: Amplifier Output Low 1: Amplifier Output Low 2: Damping factor at 100 Hz: Input Sensitivity: XLR High Out: DSP:

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 139

640 770 1240

B&O ICEpower 1000ASP B&O ICEpower 1000A 1000 Watt RMS in 4 Ohm 1000 Watt RMS in 4 Ohm > 2000 in 8 Ohm 0 dBu +6 dBu at +0 dBu Input. Marani Dig Amp DSP

18”

[Speakers]

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Half Space): Max SPL at 1 m (Theoret.): Nom. Dispersion (HxV): Dimensions (LxWxH): Net Weight:

32 – Fh Hz 26 – Fh Hz 108 dB / W / m 141 dB 360° x 180° 640 x 770 x 1240 mm 85 kg

2000W

139 04.03.11 22:19

Touring Series Spe peak aker ak erss er Ribbon-Series

DAP audio is very proud to introduce the new DAP Ribbon Speaker Series to set an new quality standard as high as possible. The main advantage is the very low distortion of the high frequencies, a very flat phase and frequency response as well a very low distortion at extreme high power levels. The wave guide and the heat sink at the back of the Ribbon Tweeter makes it also possible to increase to power handling and reduce the distortion, as well as to get the optimal horizontal coverage. The new Ribbon Tweeters have a very high efficiency by using Neodymium magnets, so it is suitable for those people who want a high quality PA sound reproduction. The benefits are: • Very low distortion at any sound pressure level • Very flat frequency response • No colorization • Frequency response, up to 40 KHz • Excellent impulse behavior • Excellent phase response • Extreme high power handling All the low speakers are made with Aluminum Die Cast frames and have optimized Thiele Small Parameters to get the highest efficiency and power handling possible. Features: • New style grille • Dual Ribbon Tweeter Protection Circuit • Two Flying Rails at each side and one Back Fling Rail. • Two metal handgrips

RB-10 D3401

Flying Eye Available models:

D8418

Big

D8428

Small

10” Speaker with Ribbon Driver

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

Special features: • Very natural sound due to ribbon on drivers • Advanced temp and overload driver protection circuit • Low distortion at high sound pressure levels • Integrated riging strips

300 320 590

8 Ohm 300 Watt Continuous 600 Watt Program 1200 Watt Peak 75 – 40.000 Hz 60 – 40.000 Hz 2200 Hz, 18 - 12 dB/Oct

10”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

95 dB / W / m 125.8 dB (Theoretical) 60° x 20° 300 x 320 x 590 mm 15 kg

8 Ohm

300W

RB-12 D3402

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

RB-15 D3403

12” Speaker with Ribbon Driver

400 400 710

8 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak 67 – 40.000 Hz 55 – 40.000 Hz 2000 Hz, 12 - 12 dB/Oct

12”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

97 dB / W / m 129 dB (Theoretical) 60° x 20° 400 x 400 x 710 mm 23 kg

Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

8 Ohm

400W

140 01_02_DAP_Speakers_10_temp2011.indd 140

15” Speaker with Ribbon Driver

Technical Information Nominal Impedance: Power Handling:

8 Ohm 500 Watt Continuous 1000 Watt Program 2000 Watt Peak 42 – 40.000 Hz 36 – 40.000 Hz 1800 Hz, 18 - 12 dB/Oct

470 480 770

15”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

97 dB / W / m 130 dB (Theoretical) 60° x 20° 470 x 480 x 770 mm 30 kg

8 Ohm

500W

Touring Series

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er Compact Array D3710

Line-array 12” top

DAP Pro offers you a Compact line array for midsize and large venue sound reinforcement. The Constant curve line array L-12 cabinet is designed for the high performance installation and touring market. Due to high quality components combined with a flexible stacking and flying system, this loudspeaker system is particularly suitable for the professional sound engineer. Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

440 395 597

12 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak 75 – 15.000 Hz 60 – 18.000 Hz 1700 Hz, 12-18 dB/Oct

12”

12 Ohm

Sensitivity (Full Space): Peak SPL at 1m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

98 dB / W / m 130 dB 100° x 15° 440 x 395 x 597 mm 26 kg

400W

Special features: Flexible stack and flying system • Briljant and clean sound • Optimised gain before feedback • Constant curve horn technology • One Stage-amp 2.6 can power 6 Units due to 12Ohm impedance

Short pin D3704

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 141

For Compact Array

[Speakers]

Riggingbar for compact array D3717

141 04.03.11 22:19

Install Series Spe peak aker ak erss er MI-Series

DAP Audio presents brilliant sound in very compact sized cabinets: the MI-series. An ideal series for fixed installations in pubs, restaurants, clubs or home cinemas. The range carries two satellites and one dual coil15” subwoofer. Due to its sophisticated design one sub-woofer and up to eight satellites can be driven by only one amplifier. No cross-over is needed, as the subwoofer has its own built-in cross-over. Designed primarily for use in reproduced sound situations these compact, powerful systems are equally at home in distributed PA for speech and vocal reinforcement or light entertainment. Special features: • Only one amplifier needed for sub and multiple satalites • High quality finish • Brackets included • HiFi Sound Quality

Special features: • Only one amplifier needed for sub and multiple satalites • High quality finish • Brackets included • 16 Ohm enables 2 sets on one subwoofer • HiFi Sound Quality

MI-250 D3282 D3282W

Bracket included!

2 x 5” 160W 8 Ohm - Black 2 x 5” 160W 8 Ohm - White

Technical Information 2-way passive d’Appollito vented satellite speaker system, including mounting bracket Nominal Impedance: 8 Ohm Power Handling: 160 Watt Continuous Freq. Response (-3 dB): 70 – 20,000 Hz Sensitivity (Full Space): 98 dB / W / m

185 190 435

5”

8 Ohm

142 01_02_DAP_Speakers_10_temp2011.indd 142

MI-150 D3281

D3281W Dispersion: Dimensions (LxWxH): Net Weight:

160W

100° conical 185 x 190 x 435 mm 6 kg

Bracket included!

5” 80W 16 Ohm - Black 5” 80W 16 Ohm - White

Technical Information 2-way passive vented satellite speaker system, Including mounting bracket Nominal Impedance: 16 Ohm Power Handling: 80 Watt Continuous Freq. Response (-3 dB): 70 – 20,000 Hz Sensitivity (Full Space): 87 dB / W / m

4,72

Install Series

175 190 265

5”

16 Ohm

Dispersion: Dimensions (LxWxH): Net Weight:

100° conical 175 x 190 x 265 mm 4,72 kg

80W

[Speakers] 04.03.11 22:20

Install Series Spe peak aker ak erss er

Special feat features: • Only one amplifier amp needed for sub and multiple satalites satalite • High quality ality finish • Built-in cross-over with high pass output for satelite speakers • HiFi Sound Quality

MI-120B 12” Subwoofer 12 inch Dual Voice Coil Subwoofer D3287

Technical Information Woofer:

Alu Basket 2x 4 Ohm, 75 mm Voice Coil Nominal Impedance: 2x 4 Ohm Power Rating Stand Alone: 2x 200W Continuous 2x 400W Program 2x 800W Peak Power Rating with Satellites: 2x 400W Continuous 2x 800W Program 2x 1600W Peak Satellites Impedance: 8 Ohm (4 – 16 Ohms)

410 433 500

12”

2x4

Crossover Freq. Low: Crossover Freq. High: Average sensitivity: Maximum Peak SPL: Frequency Response: Frequency Range: Dispersion (HxV): Dimensions (LxWxH): Weight:

2x400W

125 Hz, 12 dB/oct. 125 Hz, 6 dB/oct 100 dB/W/m Half Space 132 dB at 1 m 44 – 125 Hz (-3 dB) 35 – 200 Hz (-10 dB) 360° x 180° 410 x 433 x 500 mm 22 kg

MI-152B D3286

D3286W

Technical Information 15” 4th Order Bandpass Dual Voice Coil Subwoofer Build in passive crossover for satellite speakers Nominal Impedance: 2 x 4 Ohm Power Handling: 300 Watt Total Continuous Freq. Response (-3 dB): 45 – 200 Hz Sensitivity (Half Space): 97 dB /W /m Dimensions (LxWxH): 677 x 465 x 340 mm Net Weight: 35 kg

Install Series 01_02_DAP_Speakers_10_temp2011.indd 143

15” Dual coil Bass 300W 2 x 4 Ohm - Black 15” Dual coil Bass 300W 2 x 4 Ohm - White

677 465 340

15”

[Speakers]

2x4 Ohm

300W

143 04.03.11 22:20

Install Series Spe peak aker ak erss er PR-Series Passive

PR-32 D3501

D3502

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 3.5”, 16 Ohm, Rubber Edge Tweeter: 12.6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

130 140 200

1,6

PR-62 D3505

D3506

PR-52

40W - This set contains 2 pcs. Black 40W - This set contains 2 pcs. White

3,5”

D3503

D3504

Power Handling Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

16 Ohm

40 Watt Continuous 65 – 20,000 Hz 130 x 140 x 200 mm 1,6 kg

205 220 290

3,3

6,5”

16 Ohm

D3508

PR-82

Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

65 Watt Continuous 50 – 20.000 Hz 205 x 220 x 290 mm 3,3 kg

4,38

205 220 290

6,5”

8 Ohm

144 01_02_DAP_Speakers_10_temp2011.indd 144

2x 25W

2 x 25 Watt RMS 50 – 20.000 Hz Gain, Bass, Treble 205 x 220 x 290 mm 4,38 kg

16 Ohm

85W - This set contains 2 pcs. Black 85W - This set contains 2 pcs. White

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 8”, 16 Ohm, Rubber Edge Tweeter: 25,2 mm Textile Dome Tweeter

265 270 365

8”

16 Ohm

50 Watt Continuous 50 – 20.000 Hz 185 x 175 x 250 mm 2,5 kg

50W

D3510

6,6

Amplifier Output Power: Freq. Range (-10 dB): Controls: Dimensions (LxWxH): Net Weight:

5,25”

Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

D3509

65W

2 x 25W - This set contains 2 pcs, 1 active/1 passive. Black 2 x 25W - This set contains 2 pcs, 1 active/1 passive. White

Technical Information 2-way active plastic vented speaker system, including mounting/hanging brackets Woofer: 6.5”, 8 Ohm, Rubber Edge Tweeter: 12,6 mm Mylar Dome Tweeter

185 175 250

2,5

PRA-62 D3507

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 5.25”, 16 Ohm, Rubber Edge Tweeter: 12,6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

40W

65W - This set contains 2 pcs. Black 65W - This set contains 2 pcs. White

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 6.5”, 16 Ohm Tweeter: 12,6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

50W - This set contains 2 pcs. Black 50W - This set contains 2 pcs. White

Nominal Impedance: Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

16 Ohm 85 Watt Continuous 35 – 20.000 Hz 265 x 270 x 365 mm 6,6 kg

85W

PRA-82 D3511

D3512

2 x 25W - This set contains 2 pcs, 1 active/1 passive. Black 2 x 25W - This set contains 2 pcs, 1 active/1 passive. White

Technical Information 2-way active plastic vented speaker system, Including mounting/hanging brackets Woofer: 8”, 8 Ohm, Rubber Edge Tweeter: 25,2 mm Textile Dome Tweeter

7,98

Install Series

265 270 365

8”

8 Ohm

Amplifier Output Power: Freq. Range (-10 dB): Controls: Dimensions (LxWxH): Net Weight:

2 x 25 Watt RMS 35 – 20.000 Hz Gain, Bass, Treble 265 x 270 x 365 mm 7,98 kg

2x 25W

[Speakers] 04.03.11 22:20

Install Series Spe peak aker ak erss er Special features: • One built-in amplifier for both speakers • Light weight • Brackets included • Scratch resistant housing • Easy to clean

PM-Series Passive

• Light weight Plastic speaker cabinet. • Ideal for background music. • Available in black and white housing. One Set: 2 pcs. white or 2 pcs. black

PM-42 D3801B

D3801W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

Technical Information Power Rating (Low + High): 25 Watt RMS Frequency Response: 70– 18.000 Hz Efficiency: 88 dB/W/m (Full Space)

243 150 151

3,4

PM-62 D3802B

D3802W

4”

Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

4” polypropylene 0,75” dome 243 x 150 x 151 mm 3,4 kg

25W

PM-82 D3803B

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

Technical Information Power Rating (Low + High): Frequency Response: Efficiency:

348 203 208

6,5

50 Watt RMS 55– 20.000 Hz 89 dB/W/m (Full Space)

6,5”

D3803W Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

6,5” polypropylene 0,75” dome 348 x 203 x 208 mm 6,5 kg

D3811W

7,8

348 203 208

6,5”

50W

D3812B D3812W

High speaker: EQ section: Gain: Dimensions (LxWxH): Weight:

0,75” dome 2 bands eq +/- 15 dB 30 dB (max.) 348 x 203 x 208 mm 7,8 kg

8”

Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

8” polypropylene 0,75” dome 420 x 249 x 253 mm 12 kg

85W

Moulded Speakers - 2 pcs, Black, 8 Ohm Moulded Speakers - 2 pcs, White, 8 Ohm

Technical Information Power Rating (Low + High): 85 Watt RMS Frequency Response: 45– 20.000 Hz Efficiency: 90 dB/W/m (Full Space) Bass speaker: 8” polypropylene

Install Series 01_02_DAP_Speakers_10_temp2011.indd 145

420 249 253

85 Watt RMS 45– 20.000 Hz 90 dB/W/m (Full Space)

PMA-82

Moulded Speakers - 2 pcs, Black, 8 Ohm Moulded Speakers - 2 pcs, White, 8 Ohm

Technical Information Power Rating (Low + High): 50 Watt RMS Frequency Response: 55– 20.000 Hz Efficiency: 89 dB/W/m (Full Space) Bass speaker: 6,5” polypropylene

Technical Information Power Rating (Low + High): Frequency Response: Efficiency:

50W

PMA-62 D3811B

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

420 249 253

8”

[Speakers]

High speaker: EQ section: Gain: Dimensions (LxWxH): Weight:

0,75” dome 2 bands eq +/- 15 dB 30 dB (max.) 420 x 249 x 253 mm 15 kg

85W

145 04.03.11 22:20

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms

Desk Top Amplifiers

These products are designed for PA system applications such as announcement, intercommunication, background music and broadcasting in convention-halls, shopping centers, dining rooms, auditoriums and recreation areas. The desk top amplifiers require no complicated protective circuit to withstand overload or short-circuits of output. This results in very high reliability.

MA15 D6101

15W/4 Ohm PA Amplifier, 230V AC/12V DC

CD Player, 2 mic,1 aux input • Two unbalanced 6.3 mm jack inputs mic sensitivity • One auxiliary Jack mono input. • Final stages completely protected thermal shut down and short protection.

Technical Information Power output: RMS 15W Harmonic distortion: <1% Freq. response: 100 Hz ~ 20 kHz S/N ratio: AUX-IN > 80 dB Inputs: MIC -1,2: -45 dB AUX: -22 dB Output: COM 4~16 Ohm

Controls:

3-volume controls 3-6.3 mm jack 1-power switch Power supply: DC 12V or AC 230V Dimensions (LxWxH): 240 x 220 x 78 mm Weight: 2,21 kg

MA15CD D6102

15W/4 Ohm Amplifier with CD/MP3 Player, 230V AC/12V DC

CD Player, 2 mic, 1 aux input • This device is also suited for MP-3-Playback • Two unbalanced 6.3 mm jack inputs mic sensitivity • One Auxiliary Jack mono input • Built-in CD-PLAYER • Final stages completely protected thermal shut down and short protection.

Technical Information Power output: RMS 15W Harmonic distortion: <1% Freq. response: 100 Hz ~ 20 kHz S/N ratio: AUX-IN > 80 dB Inputs: MIC -1,2: -45 dB AUX: -22 dB Output: COM 4~16 Ohm

Controls:

3-volume controls 3-6.3 mm jack 1-power switch Power supply: DC 12V or AC 230V Dimensions (LxWxH): 240 x 220 x 78 mm Weight: 2,4 kg

MA45CD D6103

45W/100V Amplifier with CD/MP3 Player, 230V AC/12V DC

CD player, 3 mic • One auxiliary RCA mono input. AC 230V, power supply in direct current (DC 12V). • The device is also suited for MP3-Playback Technical Information Power output: Power supply:

RMS 45W AC: 220-240V 50 Hz, DC: 12V Rated power consumption: AC: 110W DC: 40W DC12V Output terminal block: Low imp.: 4~16 Ohm High voltage: 50V, 70V, 100V Input sensitivity: Mic 1-3: - 52 dB ± 1 dB AUX: - 20 dB ± 2 dB S/N (1 kHz, rated output): Mic 1-3: 55 dB, AUX: 63 dB THD (AUX Input 1 kHz): < 1.0% Freq. response (load 4 Ohm, Output. 2V, -3 dB): MIC 1-3: 30~15 kHz AUX: 30~25 kHz

146 01_02A_DAP_100V_10_temp2011.indd 146

100V Amplifiers

Tone control: Alarm function: Protection:

Dimensions (LxWxH): Weight:

Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB Siren Over heat protection; Overload protection Protection for short-circuit of the output 400 x 305 x 100 mm 7,7 kg

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms PA90CDT D6110

90W/100V Amplifier with CD/MP3 Player and Tuner, 230V AC/24V DC

Front: CD player, tuner, 2 mic, 1 mic/AUX • This device is also suited for MP-3 Playback • Overheat, Overload and short circuit protection • Bass/Treble tone control • Siren ON/OFF switch Backside: • Power supply: AC 220-240V 50 Hz, DC: 24V • Output: 4 Ohm, 25V, 70V, 100V • ON/OFF switch for DC battery • Automatic transfer to DC power if AC power fails

Technical Information Power output: Rated power consumption: Input sensitivity Mic 1-3:: Input sensitivity AUX: S/N (Input 1 kHz, rated output):

THD (AUX Input 1 kHz):

RMS 90W AC: 230W - 52 dB ± 1 dB - 20 dB ± 2 dB Mic 1-3: 52 dB, rated output; AUX: better than 60 dB, rated output; < 1.0%

Freq. response: (load 4 Ohm, output 2V, -3 dB):Mic 1-3: 50~15kHz, AUX: 50~18 kHz Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB Tuner: PLL AM/FM ratio Dimensions (LxWxH): 400 x 305 x 100 mm Weight: 9,5 kg

PA100CD

D6111 100W/100V Amplifier with CD/ MP3 Player, 230V AC

Front: CD player, 3 mic inputs • Overheat, Overload and short circuit protection • CD volume, Bass/Treble tone control, AUX and MIC 1, 2, 3 control Backside: • Power supply: AC 220-240V 50 Hz • Output: 4, 8. 16 Ohm, 25V, 70V, 100V • Stereo LINE OUT and Stereo AUX-IN for CD-Player, Cassette

Technical Information RMS output: 100W LED VU meter Power supply: 230V Freq. response: 50 Hz ~ 20 kHz (±3 dB) Harmonic distortion: 0.8% S/N Ratio: 75 dB Input sensitivity: Mic-1. 2. 3 (-54 dB) 6.3 jack input AUX (-20 dB) RCA jack Line out: 0 dB/1V MIC input: unbalanced Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB

THD: S/N Ratio: CD-PLAYER: Output level: Power supply: Dimension:

less than 1% Mic: 60 dB AUX: 75 dB 1.3V ± 2 dB (Only AC) 115V/230V 450 x 320 x 100 mm (LxWxH)

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 147

[100V P.A. Systems]

147 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms PA180 D6112

180W Amplifier with 4 Speaker Zone Controls, 230V AC

4 unbalanced 6.3 mm jack inputs / mic sensitivity • One auxiliary RCA stereo inputs, four stage line sensitivity selectable • One PRE OUT, One MAIN IN • Priority function of inputs 1-4 over auxiliary AUX switch activation, priority function of input 1 over other inputs, activated Microphone (voice priority) • Slave outputs for “music on hold” function • Zone paging broadcast indicated LED • 600 Ohm telephone paging input built-in • Treble and bass controls • LED indicator • Outputs for low-impedance and constant voltage speaker • Power supply in alternating current 230V AC • Signal indicated LED • Clip indicated LED • Output port indicated LED Technical Information Power output: RMS 180W Freq. response: 50~20 kHz ± 3 dB Power supply: Only 230V Input/sensitivity: Mic - 1~4 (6.3 jack) unbalance 1.3 mV (-56 dB) AUX/RCA: AUX (-18 dB) tape (-14 dB) tuner (-9 dB) CD (-5 dB) to select switch Main in (0 dB/1V) Output (Ohm): COM 4, 8, 16 Ohm Output (V): 25, 70, 100V

Controls:

5 volume controls, master volume, treble/bass, 4-selector speaker, 1-muting activols Total harmonic distortion:< 0.5% S/N ratio: INPUT 1-4: >60 dB AUX IN: >70 dB MAIN IN 1-4: >80 dB Dimensions (LxWxH): 433 x 310 x 89 mm Weight: 10,3 kg

PA240 D6113

240W Amplifier with 4 Speaker Zone Controls, 230V AC

4 balanced COMBO inputs / mic sensitivity selectable and switchable 24 Vdc phantom supply. • One auxiliary RCA stereo inputs, four stage line sensitivity selectable • One PRE OUT • One MAIN IN • Priority function of inputs 1-4 over auxiliary AUX switch activation, priority function of input 1 over other inputs, activated Microphone (voice priority) • Slave outputs for “music on hold” function • Zone paging broadcast indicated LED • 4-Tone Chime • Paging selectable up to four zone • 600 Ohm telephone paging input built-in • Treble and bass controls • LED indicator • Outputs for low-impedance and constant voltage speaker • Power supply in alternating current (115V or 230V ac) • Signal indicated LED • Clip indicated LED • Output port indicated LED

148 01_02A_DAP_100V_10_temp2011.indd 148

100V Amplifiers

Technical Information Power Output: RMS 240W Freq. response: 50~20 kHz ± 3 dB Power supply: Only 230V Input/sensitivity: Mic-1~4 (COMBO INPUTS) balance 1.3 mV (-56 dB) & 24 VDC phantom supply for switch SEL (LINE/AUX) Mic/MIc -24V AUX/RCA: AUX (-18 dB) tape (-14 dB) tuner (-9 dB) CD (-5 dB) to select switch Main in (0 dB/1V) Chime output: 4-TONE: 440, 554, 659, 880 Hz

Output (Ohm): Output (V): Controls:

COM 4, 8, 16 Ohm 25, 70, 100V 5 volume controls, master volume, treble/bass 4-selector speaker, 1-muting activols, chime switch Total harmonic distortion: <0.5% S/N ratio: INPUT 1-4: >60 dB AUX IN: >70 dB MAIN IN 1-4: > 80 dB Dimensions (LxWxH): 433 x 310 x 89 mm Weight: 12,5 kg

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms VPA-060 D4141

60W/100 Volt Power Amplifier

VPA-150 D4142

150W/100 Volt Power Amplifier

VPA-250 D4143

250W/100 Volt Power Amplifier

Features: • • • • • • •

Two microphone inputs, two auxiliary inputs and two AUX out for line. Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs. Muting function. Individual volume control and master volume control. Low and high tone control Output circuit shorting protection & alarm. Chime output.

Technical Information Model: VPA-60 Output: 60W Output regulation: Speaker output: AUX output: Inputs:

Distortion:

VPA-150 150W

VPA-250 250W

Signal to noise ratio:

Less than 3 dB, no load to full load Balanced 4-16 Ohm, 70V, 110V, 240V 600 Ohm 1V (0 dBV) Mic 1,2/600 Ohm, 2.0 mV (-54 dBV), unbalanced AUX 1,2/10 kilo-Ohm, 250 mV (-10 dBV), unbalanced Freq. response 100 HZ - 16 kHz Less than 0.1% at 1 kHz,

Tone: Protection: Muting function: Power Requirements: Power Consumption:

1/3 rated power Microphone 1,2 66 dB AUX 1,2 70 dB Bass: +- 10 dB at 100 Hz Treble: + -10 dB at 10 Hz AC fuse; DC voltage, overload and short circuit. Mic 1 overrides, other input signals with 0~-30 dB attenuation.

Dimensions: Gross Weight:

483 x 400 x 89 mm 16 kg 20 kg

24 kg

AC 220~240V/50 ~ 60 Hz 100W 200W 320W

MXPA-80 D6130

Multiplex professional PA Power Amplifier mplifier 80W

• Built-in CD player (MP3 readable) and Tuner module • Rack mountable (2U size, rack ear available) • Compact construction for reliable transportation and long term application • Versatile input section for different sound reinforcement applications, and 4-pin dipswitches enhance its functions • Pre out/Amp in for external processors connected into the sound system • Tape out for recording • Top priority of Siren and Tel. paging, then, higher priority of chime and Input 1 than other inputs • Bass and Treble controls for the master output • Low impedance and constant voltage output Technical Information Power supply: AC: 220-240V, 50 Hz DC 24V Power output: 80W RMS Freq. response: 50 Hz ~ 16,5 kHz (±3 dB) Input impedance and sensitivity: MIC: -55 dB V 5K Ohm BAL LINE: -10 dB V 5K Ohm BAL AUX: -20 dB V 10K Ohm UNB Tone Control: Bass: 100 Hz ±10 dB Treble: 10 kHz ± 10 dB THD (at 1W): <0.5% S/N ration: MIC > 65 dB LINE > 65 dB AUX > 75 dB Dips function (MIC/Euroblock): 1. MIC/LINE 2. BAL/UNBAL

3. HIGH PASS FILTER 4. 48V Phantom Dips function (AUX/Euroblock): 1. AUX 1/2 2. -10 dB PAD ENABLE 3. HIGH PASS FILTER 4. 0 dB u / -10 dB V Output Impedance: COM 4 Ohm, 8 Ohm, 16 Ohm Line Output: COM, 70V, 100V Siren function: Yes VU-meter (LED): Yes Telephone paging select function: Yes Input 1 priority: Yes 2-Tone CHIME: Yes

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 149

Digital tuner module: Receive range: Sensitivity: S/N ratio: CD Player module: Channel: Frequency: Separation rate: T.H.D.: Dimensions (LxWxH): Weight:

[100V P.A. Systems]

FM: 87.5 ~ 108 MHz AM: 525 ~ 1650 kHz FM: 2.5S uV/ AM: 20 uV FM: 65 dB/ AM: 50 dB With MP3 reader function Output level: less than 2.0 dB ±0.5 / -1 dB; 0 +/- 1 dB; +/- 2 dB; -1+/- 2 dB >60 dB >0.05% 483 x 360 x 89 mm 9,1 kg

149 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms

MXPA-180 D6131

Multiplex professional PA Power Amplifier 180W

The MXPA-180 is a Professional Public Address Amplifier.

Technical Information Power supply: AC: 110~120V, 60 Hz AC: 220-240V, 50 Hz DC 24V Power output: 180W RMS Freq. response: 50 Hz ~ 16,5 kHz (±3 dB) Input impedance and sensitivity: MIC: -55 dB V 5 kilo-Ohm BAL LINE: -10 dB V 5 kilo-Ohm BAL AUX: -20 dB V 10 kilo-Ohm UNB Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB THD (at 1W): < 0.5% S/N ratio: MIC > 65 dB LINE > 5 dB AUX > 5 dB

Dips function (MIC/Euroblock):

Dips function (AUX/Euroblock):

Output impedance: Line output: Siren function: VU-meter (LED):

1. MIC/LINE 2. BAL/UNBAL 3. HIGH PASS FILTER 4. 48V PHANTOM 1. AUX 2. -10 dB PAD ENABLE 3. HIGH PASS FILTER 4. 0 dB u / -10 dB V COM, 4 Ohm, 8 Ohm, 16 Ohm COM, 70V, 100V Yes Yes

Teletone paging select function: Input 1 priority: 2-TONE CHIME: Dimensions (LxWxH): Weight:

Yes Yes Yes 483 x 380 x 89 mm (19” x 14.5” x 3.5”) 12.9 kg (28,44 lb)

MPA-440 D6120

Multizone PA poweramplifier 4 x 40W

• Four independent channels • Five sets of gain, treble, bass and volume controls • Five groups VU meter for output level • Three XLR+1/4 TRS combo input and two RCA inputs • Telephone paging function and monitor output • Priority of MIC-1. VOX mute function • Input matrix • Output impedance 4 Ohm, 8 Ohm • High output voltage: 25V-70V-100V • Power output: RMS 40W x4 • Intelligent cooling fan • 19” Rack mount type (3U size)

Technical Information AC115V/60 Hz or AC230V/50 Hz selectable. Inputs: Sensitivity: CH1-3: Mic.: -42 dB; Line: -20 dB balanced CH4-5: Line: -10 dB unbalanced Telephone paging: -25 dB Phantom Power: 15V Freq. response: 60-17000 Hz -3 dB Tone control: Treble: ±12 dB at 10 kHz Bass:±12 dB at 100 Hz T.H.D.: <0.6%

150 01_02A_DAP_100V_10_temp2011.indd 150

S/N ratio:

Mic. >60 dB Line: >70 dB Tel. >60 dB Priority for Mic 1: Sensitivity: -35 dB Output impedance: 4 Ohm, 8 Ohm Output constant voltage: 25V - 70V - 100V Power output: RMS 40W X4 at 4 Ohm LED: 5VU meters (LED type) 1 Power indicator 5 Mute indicators Dimensions (LxWxH): 483 x 310 x 133 mm Weight: 15,10 kg

100V Amplifiers

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms MPA-4150 D6121

Multizone PA Power amplifier 4 x 150W

• 4 independent channels • 4 sets of bass, Treble and volume controls • 4 groups LED level meter with protection indicator • 4 balance inputs for Mic. and input sensitivity control • Telephone paging function, terminal block and Phoenix type input type • Priority of MIC-1, VOX mute function • Output impedance: 4 Ohm • High output voltage 70V, 100V • Output power: 150W x 4 at 4 Ohm, Bridge: 280W x 2 at 8 Ohm • Tone CHIME / Siren function • Selectable input types: COMBO (TRS & XLR) Phoenix type

• Switchable input functions: MIC./Line input sensitivity Balanced/unbalanced input mode High pass filter 48V phantom power • Input mode selectable: Four independent inputs or input CH1 to output CH1-4 • 19” Rack mount type (3U size)

Tone control: T.H.D.%: S/N ratio: Priority for MIC.1:Sensitivity: Output impedance: Output constant voltage: Output power:

Treble: ±10 dB at 10 kHz Bass: ±10 dB at 100 Hz <0.5% Mic: >60 dB Line: >70 dB Tel: >60 dB -30 dB ± 5 dB Mono: 4, Bridge: 8 Mono: 70V, 100V; Bridge: 140V, 200V Independent: 100W x 4 at 4 Ohm, 8 Ohm

4-Tone Chime: Siren: Indicate LED:

Dimensions (LxWxH): Weight:

Bridge: 460W x 2 at 8 Ohm 440, 554, 659, 880 Hz four stage musical Manual switch on the front panel, remote control terminal on rear panel 4 for operation mode 4 VU meters (LED Type), volume control, sound control type 483 x 356 x 133 mm 8,3 kg

MPA-4250 D6122

Multizone PA Power Amplifier 4 x 250W

• Four independent outputs • Four sets of bass, treble and volume controls • Four groups LED level meter with protection indicator • Four balance inputs for Mic. and input sensitivity control • Telephone paging function, terminal block and Phonix terminal input type • Priority of MIC 1, VOX mute function • Output impedance: 4 Ohm • High output voltage: 70V, 100V • Output power: 250W x4, at 4 Ohm 460W x2, at 8 Ohm • Tone CHIME / Siren function • Selectable input types: COMBO (TRS & XLR) Phonix type • Switchable inputs function: MIC./Line input sensitivity Balance/ unbalance input mode High bass filter 48V phantom power • Input mode selectable: 4 independent inputs or input CH1 to output CH1~4 • 19 inch Rack mount type (3U size)

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 151

Technical Information Power supply: AC 110V / 60 Hz or AC 230V / 50 Hz selectable Inputs 1~4: Sensitivity: Mic: -55 dB balance Line: -16 dB balance High filter: 150 Hz (-3 dB) Phantom: 48V Telephone paging function sensitivity: 120 mV Freq. response: Mic. 60 Hz ~ 12 kHz (-3 dB) Line: 30 Hz ~ 18 kHz (-3 dB) Tel: 120 Hz ~ 5 kHz (-3 dB) Tone control: Treble: ±10 dB at 10 kHz Bass: ±10 dB at 100 Hz T.H.D.%: < 0.5% S/N ratio: Mic: > 60 dB Line: > 70 dB Tel: > 60 dB Priority for MIC 1: Sensitivity: -30 dB ±5 dB

[100V P.A. Systems]

Output impedance: Mono: Bridge: Output constant volt.: Bridge: Output power: Independent: Bridge: 4-Tone Chime:

4 Ohm; 8 Ohm 70V, 100V 140V, 200V

150W x 4 at 4 Ohm, 460W x 4 at 8 Ohm 440, 554, 659, 880 Hz four stage musical Siren: Manual switch on the front panel, remote control terminal on rear panel Indicate LED: 4 for operation mode 4 VU meters (LED Type), volume control, sound control type Dimensions (LxWxH): 483 x 356 x 133 mm Weight: 15 kg

151 07.03.11 09:19

Conference Systems 100 00VV P.P.A. A. Sys yste tems te ms 8 Zones Multiroom System D2680

incl 8x Control Keypad & Remote

Multi-room/source distribution system Audio and Video signal distribution Easy connection and mounting system Master-slave link setup (10 units) Technical information: Power supply: Power consumption: Power connector: Output power: Output connector audio: Keypad connector: Keypad controls: Dimension:

AC 115V-60Hz, 230V-50Hz 240 Watt Schuko 8 zones 20 watt terminal connector RJ-45 (UTP cat-5) 6 stereo inputs (RCA) Source, bass, treble, volume 4 camera inputs (RJ-45) 4 video inputs (RCA) 413 x 427 x 88 mm (LxWxH) Video

room 1

152 01_02A_DAP_100V_10_temp2011.indd 152

Conference Systems

room 2

room 3

room 4

Tuner

room 5

room 6

room 7

room 8

[100V P.A. Systems] 07.03.11 09:19

Conference Systems 100 00VV P.P.A. A. Sys yste tems te ms Wireless Conference System Available models:

Wireless!

D2671

4-Channel (4 x 32 Channels), set: 4 mics

D2670

8-Channel (8 x 32 Channels), set: 8 mics

Technical information:

D2671 : Frequency range: With PLL combined technology:

Frequency stability: Operating range: T.H. D distortion: Frequency response: Audio frequency output: Tone frequency: RECEIVER Frequency range: Operating voltage: S/N ratio: T. H. D distortion: Frequency response:

UHF 500-980MHz adopt CPU control 3 group system frequency each group can be used 4 sets at the same time without interference (3x4=12 transmitter), 3 group frequency can be use 3x4=12 sets (3x4x4=48 transmitters ) <±10ppm >105dB <0.5% 40Hz -18KHz balanced output :0-600mV unbalanced output 0-300mV 32K-51.2KHz

500-980MHz DC-13.8V/1000mA >105dB <0.5% 40Hz-18KHz Noise locked +pilot tone locked

TRANSMITTER (Wireless conference microphone ) Power supply: 2x AA batteries , Standing time: about 8 hours

D2670 : Frequency range: With PLL combined technology:

Frequency stability: Operating range: T.H. D distortion: Frequency response: Audio frequency output: Tone frequency: RECEIVER Frequency range: Operating voltage: Sensitivity of receiver selective switch S/N ratio: T. H. D distortion : Frequency response: Noise locked +pilot tone locked

UHF 500-980MHz adopt CPU control 2 group system frequency each group can be used 3 sets at the same time without interference (3x8=24 transmitter), 2 group frequency can be use 2x3=6 sets (2x3x8=48 transmitters ) <±10ppm >105dB <0.5% 40Hz -18KHz balanced output: 0-600mV unbalanced output 0-300mV 32K-51.2KHz

500-980MHz DC-13.8V/1500mA >105dB <0.5% 40Hz-18KHz

4 or 8 Channels:

• Use UHF 500-980MHz range, adopt PLL combined technology, and the transmitter power is adjustable, they can be used several sets at the same time without interference. • CPU control with LCD display makes operation easy and performance outstanding. • Use multi-channel with high frequency to avoid the interference. • With audio compressing-expanding technology ,the machine can reduce the noises and increase the dynamic range. • Having backsound restrain function can avoid backsound scream. • The receiver adopt multi-level high frequency enlargement, so and has the high sensitivity. • Multi-level noise supervisory circuit .Special with the tone locked system make the machine have a strong anti-jamming characteristics. • Using the best parts and CPU, to keep the products with the perfect performance. • 100 meters in best condition, 60 meters in normal condition. The largest using range is above 100 meters in the spacious place, 50 meters for the ideal using range.

TRANSMITTER (Wireless conference microphone ) Operating Frequency: 500-980MHz Transmitter power: H 10dBm ,L 5dBm Cartridge gain adjusting: -20dB to 30dB Modulate mode: FM With FM Max frequency adjusting: ±45KHz High wave: <main wave 60dB Power supply: 2*AA batteries , standing time: about 8 hours TRANSMITTER (Wireless conference microphone) Operating frequency: 500-980MHz Transmitter power: H 10dBm ,L 5dBm Cartridge gain adjusting: -20dB to 30dB Modulate mode: FM With FM Max frequency adjusting: ±45KHz High wave: <main wave 60dB Power supply: 2x AA batteries, standing time: about 8 hours

Conference Systems 01_02A_DAP_100V_10_temp2011.indd 153

[100V P.A. Systems]

153 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms THD15 D6201

SHD25

Round speaker horn 15W, 8 Ohm

D6206 Square horn speaker, 25W, 8 Ohm

15W horn speaker to be used in installations where multiple speakers are used to cover a large surface.

210 210 210

0,85

15W

IP-66

Technical information: Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

25W horn speaker meant for speech reproduction in installations that need to cover a big space.

0,84 Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

D6202

IP-66

Square 25W 8 Ohm 300~900 Hz 100 dB Aluminium 200 x 210 x 150 mm 0,84 kg

SHD35

Round speaker horn 25W, 8 Ohm

D6207 Square horn speaker, 35W, 8 Ohm

25W horn speaker to cover a large surface with a high sound pressure level.

1,1

250 250 250

25W

35W horn speaker to cover big surfaces that need a high sound pressure level.

IP-66

Technical information:

1,05

247 245 175

35W

IP-66

Technical information: Round (10”) 25W 8 Ohm 300~800 Hz 107 dB Aluminium 250 x 250 x 250 mm 1,1 kg

Type: Rated power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

Square 35W 8 Ohm 300~10.000 Hz 107 dB Aluminium 247 x 245 x 175 mm 1,05 kg (2.2 1b)

THD40

SHD40

Round speaker horn 40W, 8 Ohm (complete assembled)

D6208 Square horn speaker, 40W, 8 Ohm (complete assembled)

40W horn speaker to be used in installations where multiple speakers are used to cover a large surface.

Square type horn speakers for controlled directivity. Made of aluminium, they are easy to install. 8 Ohm impedance for direct matching to standard amplifiers.

D6203

2,1

360 398 398

40W

IP-66

Technical information: Type: Input power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

25W

Technical information: Round (8”) 15W 8 Ohm 300~800 Hz 100 dB Aluminium 210 x 210 x 210 mm 0,85 kg

THD25

Type: Input power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

200 210 150

2,0

357 365 228

40W

IP-66

Technical information: Round (16”) 40W 8 Ohm 250 ~ 5 kHz 112 dB Aluminium 360 x 398 x 398 mm 2,1 kg

154 01_02A_DAP_100V_10_temp2011.indd 154

Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

100V Hornspeakers

Square 40W 8 Ohm 250~7 kHz 105 dB Aluminium 357 x 365 x 228 mm 2,0 kg

[100V P.A. Systems] 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms PSH10T

TH10T

100V

D6211

ABS square horn speaker, 10W,

D6216

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66. 180 176 153

10W

IP-66

Technical information: Rated input power: Input impedance: Pre-set impedance: Freq. Response: Output power: S.P.L: Material: Dimensions (LxWxH):

Input power (RMS): Input impedance: Pre-set impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

PSH15T

TH15T

100V

ABS square horn speaker, 15W,

228 222 171

15W

D6217

IP66 Round speaker horn 15W,

230 213 197

15W

IP-66

Technical information: 15W (70V, 25V line) 42 Ohm, 63 Ohm, 170 Ohm, 330 Ohm, 500 Ohm, 1 kilo-Ohm, 1.3 kilo-Ohm, 2.3 kilo-Ohm -330 Ohm 450 Hz ~ 5 kHz (-10 dB) 1, 3, 5, 10, 15W 105 dB (1W/M) Aluminium 228 x 222 x 171 mm

Input power (RMS): Input impedance: Pre-set Impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

15W (100V line)196,8 670 Ohm, 1 kilo-Ohm, 2 kilo-Ohm, 3.3 kilo-Ohm, 10 kilo-Ohm 670 Ohm 280 ~ 12.500 kHz 108 dB (1W/M) Aluminium 212,5 mm 230 x 213 x 197 mm

PSH30T

TH30T

100V

D6213

ABS square horn speaker, 30W,

D6218

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66.

Technical information:

Pre-set impedance: Freq. response: Output power: S.P.L: Material: Dimensions (LxWxH):

IP-66

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

IP-66

Technical information:

Rated input power: Input impedance:

10W

10W (100V line) 1 kilo-Ohm, 2 kilo-Ohm, 3,3 kilo-Ohm, 10 kilo-Ohm 1 kilo-Ohm 315 ~ 12.500 kHz 105 dB (1W/M) Aluminium 161,5 mm 187 x 162 x 171 mm

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66.

Pre-set impedance: Freq. response: Output power: S.P.L: Material: Dimensions (LxWxH):

187 162 171

Technical information: 10W (70V, 25V line) 63 Ohm, 130 Ohm, 500 Ohm, 1 kilo-Ohm, 1,7 kilo-Ohm, 2,9 kilo-Ohm 500 Ohm 500 Hz ~ 6 kHz (-10 dB) 1, 3, 5, 10W 103 dB (1W/M) Aluminium 180 x 176 x 153 mm

D6212

Rated input power: Input impedance:

IP66 Round speaker horn 10W,

258 287 209

30W

IP66 Round speaker horn 30W,

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

IP-66

261 259 235

30W

IP-66

Technical information: 30W (70V, 75V line) 21 Ohm, 42 Ohm, 63 Ohm, 170 Ohm, 330 Ohm, 500 Ohm, 1 kilo-Ohm, 1,3 kilo-Ohm, 2,3 kilo-Ohm 170 Ohm 350 Hz ~ 5 kHz (-10 dB) 1, 3, 5, 10, 15, 15W 107 dB (1W/M) Aluminium 258 x 287 x 209 mm

Input power: Input impedance: Pre-set impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

100V Hornspeakers 01_02A_DAP_100V_10_temp2011.indd 155

30W (100V line) 330 Ohm, 670 Ohm, 1 kilo-Ohm, 2 kilo-Ohm, 3.3 kilo-Ohm, 10 kilo-Ohm 330 Ohm 250 ~ 16.000 kHz 109 dB (1W/M) Aluminium 259 mm 261 x 259 x 235 mm

[100V P.A. Systems]

155 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms TH12 D6221

diameter

TH20

Round trumpet horn 30 cm

D6223

diameter

30 cm Trumpet Horn. Specially indicated for free air use or in big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

1,3

247 314 404

50 cm Trumpet Horn. This diffusor, due to his size, is designed to join up compression motors of great power and be able to cover big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

IP-66

Round Aluminium 314 mm 247 x 314 x 404 mm 1,3 kg

Type: Material: Diameter: Dimensions (LxWxH): Weight:

Round Aluminium 516 mm 385 x 516 x 505 mm 1,9 kg

TH16

SH15

40 cm Trumpet Horn. Specially thought for big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

The SH-15 is a horn specially designed for use in application where sound should go wide and far, e.g. sport-centre. The horn is made of aluminium. Weight 1,4 kg. Prepared for Driver HD35T, HD60T or HD80T.

Round trumpet horn 40 cm diameter

1,5

317 395 445

D6224

IP-66

Driver 35W, 100V transformer

Type: Material: Dimensions (LxWxH): Weight:

HD60T D6227

Driver 60W, 100V transformer

IP-66

195 125 125

60W

HD80T D6228

195 125 125

IP-66

Driver 80W, 100V transformer

80W Driver with transformer line 100V adaptable to whatever horn of the range. Due to its features, it is specially indicated to be used for a clear audition.

80W

IP-66

Technical information:

Input power: Input voltage: Impedance:

Input power (RMS): 60W (with transformer) Input voltage: 100V Impedance: 170 Ohm (60W)/ 250 Ohm (40W)/500 Ohm (20W) Freq. response: 200 Hz ~ 4.5 kHz (-20 dB) S.P.L: 115 dB (1W/M) with TU-20 Material: Aluminium/Unit cover Dimensions: diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

Input power (RMS): 80W (with transformer) Input voltage: 100V Impedance: 125 Ohm (80W) / 200 Ohm (50W) / 290 Ohm (35W) Freq. response: 200 Hz ~ 4.5 kHz (-20 dB) S.P.L: 115 dB (1W/M) with TU-20 Material: Aluminium/ Unit cover Dimensions: diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

Freq. response: S.P.L: Material: Dimensions:

IP-66

Square Aluminium 302 x 380 x 361 mm 1,4 kg

35W driver with transformer line 100V adaptable to whatever 60W driver with 100V line transformer. Can be used with all horn of the range. horn-trumpets. Due to its features, it is specially thought to Due to its features, it is especially thought for a clear audition. be used where a high fidelity in word reproduction is necessary. • Includes line transformer for constant voltage. • Includes line transformer for constant voltage. • Watertight construction. • Watertight construction. • Compression chamber and bottom • Compression chamber and bottom pressure die-cast aluminium. pressure die-cast aluminium.

35W

302 380 361

Technical information: Round Aluminium 407 mm 317 x 395 x 445 mm 1,5 kg

HD35T

195 125 125

Square trumpet horn 38 x 23 cm

1,4

Technical information:

D6226

IP-66

Technical information:

D6222

Type: Material: Diameter: Dimensions (LxWxH): Weight:

385 516 505

1,9

Technical information: Type: Material: Diameter: Dimensions (LxWxH): Weight:

Round trumpet horn 50 cm

35W (with trans.) 100V 290 Ohm (35W)/ 500 Ohm (20W)/1 kilo-Ohm (10W) 200 Hz ~ 4 kHz (-20 dB) 115 dB (1W/M) with TU-20 Aluminium/Unit cover diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

156 01_02A_DAP_100V_10_temp2011.indd 156

100V Hornspeakers

[100V P.A. Systems] 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms

Horn Speakers

A voice coil is a tightly wrapped coil of wire attached to a speaker driver’s diaphragm and situated in close proximity to a stationary magnet; electromagnet that generates a magnetic field when current passes through it thus being repelled or attracted by a speaker driver’s magnet and creating motion.

SVC35 Spare voice coil for TH15T, SHD25, SHD35, THD25 D6233

SVC40 D6234

SHD40

Spare voice coil for TH40,

SVC15

SVC30

Spare voice coil for TH10T, PSH10T, PSH15T

PSH30T

SVC60

SVC100

D6231

D6235

& HD60T

Spare voice coil for SHD35

D6232

D6236

Spare voice coil for TH30T,

Spare voice coil for HD80T

Powered Megaphones

These megaphones deliver a clear effective voice amplification. The mini-typed megaphone with built-in siren or whistle functions can be applied in schools, home yards, or outdoor camps.

MF-8 D6420

MF-25F

Hand megaphone 8 W

D6422 Hand megaphone 25W with siren

Hand Grip Typ Megaphone

237 150 236

0,63 Technical Information Power: Max. 8W Range: 0.3 ~ 0.61 km depending on operating conditions Battery: 6 x “AA” (UM-3) type batteries (not supplied)

1,65

370 220 220

25W

Technical Information External power source: Speaker impedance: Dimensions (LxWxH): Weight:

7.2V battery or 6-1.2V DC 8 Ohm 237 x 150 x 236 mm 0,63 kg approx. (without battery)

Power: Range:

Max. 25W 0.8 ~2 km depending on operating conditions 8 x “C” (UM-2) type batteries (not supplied)

Battery:

External power source: Speaker impedance: Dimensions (LxWxH): Weight:

12V battery or 8 - 1.5V DC 8 Ohm 370 x 220 x 220 mm 1,65 kg approx.

(without battery)

MF-10S

MF-25S

Small, light and smart design • With built-in siren and designed for hand-holding use

Hand Grip Type with shoulder strap

D6421

0,9 Technical Information Power: Max. 10W Range: 0.5 ~ 0.8 km depending on operating conditions Battery: 8 x “AA” (UM-3) type batteries (not supplied)

Hand Grip Type • With built-in siren

Hand megaphone 10W with siren

320 180 180

External power source: Speaker impedance: Dimensions (LxWxH): Weight:

D6423 Shoulder and hand megaphone 25W with siren

10W 7.2V battery or 6-1.2V DC 8 Ohm 320 x 180 x 180 mm 0,9 kg approx. (without battery)

1,65 Technical Information Power: Max. 25W Range: 0.8 ~ 2 km depending on operating conditions Battery: 8 x “C” (UM-2) type batteries (not supplied) External power source: 12V battery or 8-1.5V DC

350 235 235

Speaker impedance: Cable: Dimensions (LxWxH): Weight:

25W 8 Ohm 1,5 m 350 x 235 x 235 mm 1,65 kg approx. (without battery)

PWA-5 D6430

Waistband amplifier 5W incl. microphone headset

Technical information: Condenser mic, 4 Ohm 2,5” papercone speaker Weight: ± 0,85 kg

100V Hornspeakers 01_02A_DAP_100V_10_temp2011.indd 157

[100V P.A. Systems]

157 07.03.11 09:19

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms PR-52T

PR-32T D3531 D3532

15W - This set contains 2 pcs. Black 15W - This set contains 2 pcs. White

Technical Information • 2-way plastic sealed box-design • 4” Mica cone rubber edge woofer • Tweeter: 13 mm Mylar dome tweeter • Frequency: 80 Hz - 20 kHz • 100V line transformer built in • 16 Ohm/2W/4W/8W/15W

155 160 210

2,04

4”

D3533 D3534

• Sensitivity: 89 dB • Dimensions: (LxWxH) 155 x 160 x 210 mm including mounting/hanging brackets • Weight: 2,04 kg

16 Ohm

PR-62T D3535 D3536

Technical Information • 2-way plastic sealed box-design • 5,25” mica cone rubber edge woofer • 13 mm mylar dome tweeter • Frequency: 50 Hz - 20 kHz • 100V line transformer built in • 16 Ohm/5W/10W/15W

165 180 240

2,46

5,25”

• Sensitivity: 89 dB • Dimensions: (LxWxH) 165 x 180 x 240 mm including mounting/hanging brackets • Weight: 2,46 kg

15W

16 Ohm

PR-82T

30W - This set contains 2 pcs. Black 30W - This set contains 2 pcs. White

Technical Information • 2-way plastic vented box-design • 6,25” mica cone rubber edge woofer • 13 mm mylar dome tweeter • Frequency: 40 Hz - 20 kHz • 100V line transformer built-in • 16 Ohm/4W/8W/15W/30W

4,06

15W - This set contains 2 pcs. Black 15W - This set contains 2 pcs. White

190 215 290

6,25”

158 01_02A_DAP_100V_10_temp2011.indd 158

D3537 D3538

• Sensitivity: 89 dB • Dimensions: (LxWxH) 190 x 215 x 290 mm including mounting/hanging brackets • Weight: 4,06 kg

30W

16 Ohm

100V Speakers

30W - This set contains 2 pcs. Black 30W - This set contains 2 pcs. White

Technical Information • 2-way plastic vented box-design • 8” mica cone rubber edge woofer • 25 mm silk dome tweeter • Frequency: 30 Hz - 20 kHz • 100V line transformer built-in • 16 Ohm/4W/8W/16W/30W

6,66

270 265 365

6,25”

• Sensitivity: 90 dB • Dimensions: (LxWxH) 270 x 265 x 365 mm including mounting/hanging brackets • Weight: 6,66 kg

30W

16 Ohm

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms PMT-42 D3820B D3820W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 2, 4 ,8, 16 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

243 150 151

4,2

2,4,8,16 Watt RMS 70– 18.000 Hz 88 dB/W/m (Full Space) 4” polypropylene 0,75” dome 243 x 150 x 151 mm 4,2 kg

Speaker-Set! 16W RMS

PMT-62 D3822B D3822W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 4, 8, 16, 30 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

348 203 208

8,5

4,8,16,30 Watt RMS 55-20.000 Hz 89 dB/W/m (Full Space) 6,5” polypropylene 0,75” dome 348 x 203 x 208 mm 8,5 kg

30W RMS

PMT-82 D3823B D3823W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 4, 8, 16, 30 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

420 249 253

4,8,16,30 Watt RMS 45– 20.000 Hz 90 dB/W/m (Full Space) 8” polypropylene 0,75” dome 420 x 249 x 253 mm 15 kg

30W RMS

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 159

[100V P.A. Systems]

159 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CST 500/600 Serie incl. 100V transformer and firedome

CST-510 -510

CST-515 -515

5,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6261 5,5” ceiling speaker 15W incl. 100V line transformer, firedome

Ceiling speaker 5,5”/10W incl. line transformer.

Ceiling speaker 5,5”/15W incl. line transformer.

D6260

Technical information:

Input power: Output power: Speaker: Input voltage: Impedance:

Input Power: Output Power: Speaker:

RMS 10W 2.5, 5, 10W 5.5”-8 Ohm paper cone speaker 50, 70, 100V 100V - 4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm 70V - 2 kilo-Ohm /1 kilo-Ohm /490 Ohm 50V - 1 kilo-Ohm /490 Ohm /250 Ohm Freq. response: 100~18 kHz S.P.L: 90 dB (1W/M) Material: Metal (Metal grille) Ceiling Hole Diameter: 172 mm Speaker Diameter: 180 mm

RMS15 3.57, 7.5, 15 5.5”-8 Ohm paper cone speaker Input voltage: 50, 70, 100V Impedance: 100V - 2,66 kilo-Ohm /1,33 kilo-Ohm /666 Ohm 70V - 1,33 kilo-Ohm /666 Ohm /326 Ohm 50V - 666 Ohm /326 Ohm/166 Ohm Freq. response: 100~18 kHz S.P.L.: 90 dB (1W/M) Material: Metal (Metal grille) Ceiling Hole Diameter: 172 mm Speaker Diameter: 180 mm

CST-610 -610

CST-615 -615

Ceiling speaker 6,5”/10W incl. line transformer.

Ceiling speaker 6,5”/15W incl. line transformer.

6,5” ceiling speaker 10W incl. 100V line transformer, firedome D6270

D6271 6,5” ceiling speaker 15W incl. 100V line transformer, firedome

Technical information:

Input power: Output power: Speaker:

Input power: Output power:

RMS 10W 2.5, 5, 10W 6.5”-8 Ohm paper cone speaker Input voltage: 50, 70, 100V Impedance: 100V - 4 kilo-Ohm/2 kilo-Ohm /1 kilo-Ohm 70V - 2 kilo-Ohm /1 kilo-Ohm /490 Ohm 50V - 1 kilo-Ohm /490 Ohm/250 Ohm Freq. response: 100~20 kHz S.P.L.: 92 dB (1W/M) Material: Metal case (Metal grille) Ceiling Hole Diameter: 205 mm Speaker Diameter: 220 mm

RMS 15W 3.75, 7.5, 15W 6.5”-8 Ohm paper cone speaker Input-Voltage: 50, 70, 100V Impedance: 100V-2.66 kilo-Ohm /1,33 kilo-Ohm /666 Ohm 70V - 1,33 kilo-Ohm /666 Ohm /326 Ohm 50V-666 Ohm /326 Ohm/166 Ohm Freq. response: 100~20 kHz S.P.L.: 92 dB (1W/M) Material: Metal case (Metal grille) Ceiling Hole Diameter: 205 mm Speaker Diameter: 220 mm

CST-6506

D6280 6,5” ceiling speaker quickmount 6W incl. 100V line transformer

Ceiling speaker 6,5”/6W incl. 100V line transformer.

Technical Information Speaker: Input power: Output power: Input voltage:

160 01_02A_DAP_100V_10_temp2011.indd 160

100V Speakers

6,5” - 16 Ohm paper cone speaker Rated 6W 1,5, 3, 6W 6,6 kilo-Ohm/3,3 kilo-Ohm /1,66 kilo-Ohm

Impedance: Freq. Response: S.P.L: Ceiling Hole Diameter: Speaker Diameter:

100V 100 ~ 20 kHz 86 dB (1M/W) 178 mm 199 mm

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms CSE-610 E D6290

CSE-506 E

6” Economical Ceiling Speaker 6-10W

D6291

5” Economical Ceiling Speaker 3-6W

Technical information:

Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: Mounting diameter: Dimensions:

120Hz - 15kHz 8 Watt 70-100V 92dB 8 Ohm 6,5 inch 190-200 mm 230 x 65 mm

CST-6512

150Hz - 15kHz 5 Watt 70-100V 90dB 8 Ohm 5 inch 148-158 mm 180 x 60 mm

CST-6520

6,5” ceiling speaker quickmount 12W incl. 100V line transformer

D6282 6,5” ceiling speaker quickmount 20W incl. 100V line transformer

Ceiling speaker 6,5”/12W incl. 100V line transformer

Ceiling speaker 6,5”/20W incl. 100V line transformer

D6281

Technical information:

Speaker:

6,5” - 16 Ohm paper cone speaker Input power: Rated 12W Output power: 3, 6, 12W Input voltage: 3,3 kilo-Ohm/1,66 kilo-Ohm /833 kilo-Ohm Impedance: 100V S.P.L: 88 dB (1M/W) Ceiling Hole Diameter: 178 mm Speaker Diameter: 199 mm

CST-206

D6250W White 2,5” ceiling speaker 6 W incl. 100V line transformer

Input power: Output power: Input voltage: Impedance: Freq. Response: S.P.L: Ceiling Hole Diameter: Speaker Diameter:

6,5” - 4 Ohm paper cone speaker Rated 20W 5, 10, 20W 2 kilo-Ohm /1 kilo-Ohm /500 kilo-Ohm 100V 100 ~ 20 kHz 90 dB (1M/W) 178 mm 199 mm

D6250G Gold 2,5” ceiling speaker 6 W incl. 100V line transformer

CST-206 is for suspended ceiling installation. It has 2.5” 8 Ohm full range speaker and the grille is a metal construction. The assembly can be simply and quickly installed into the ceiling cavity. You can use them conveniently. There are two colour choices. (white and brushed gold) to meet different requirements of customers. Technical Information Input power: RMS 6W Output power: 6, 3, 1.5W Speaker: 2.5” - 8 Ohm paper cone speaker Impedance: 100V - 6,6 kilo-Ohm /3,3 kilo-Ohm /1,66 kilo-Ohm 70V - 3,3 kilo-Ohm /1,66 kilo-Ohm /816 Ohm 50V - 1,66 kilo-Ohm /816 Ohm /416 Ohm

Input voltage: S.P.L: Material: Ceiling Hole Diameter: Dimensions:

50, 70, 100V 86 dB (1W/M) Metal (Metal grille) 90 mm 101 x 55 mm

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 161

[100V P.A. Systems]

161 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

Uni-directional Projector Speakers

100V uni directional Sound Projectors. They have a selector for adjusting the sound power. Recommended for music or speech reproduction. Weather-proof and suitable for indoor and outdoor use.

PST-115 D6320

Uni direction speaker 15W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: Material:

RMS 15W 3.75, 7.5, 15W One 5.5” paper/ plastic cone speaker 50, 70, 100V 100V-2,66 kilo-Ohm/1,33 kilo-Ohm /666 Ohm 70V-1,33 kilo-Ohm /666 Ohm/326 Ohm 50V 666 Ohm/326 Ohm/166 Ohm 150~20 kHz 94 dB (1W/M) ABS resin

PST-120 D6321

Uni direction speaker 20W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

RMS 20W 5, 10, 20W One 6.5” paper/plastic cone speaker 50, 70, 100V 100V - 2 kilo-Ohm, 1 kilo-Ohm, 500 Ohm 70V - 1 kilo-Ohm/ 500 Ohm/ 245 Ohm 50V - 500 Ohm/ 245 Ohm/125 Ohm 100~20 kHz 94 dB (1W/M) ABS resin

Bi-directional Projector Speakers

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

PST-215 D6322

Bi direction speaker 15W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

RMS 15W 3.75, 7.5, 15W Two 5.5” paper/plastic cone speaker 50, 70, 100V 100V - 2,66 kilo-Ohm/ 1,33 kilo-Ohm /666 kilo-Ohm 70V - 1,33 kilo-Ohm /666 Ohm/326 Ohm 50V-666 Ohm/326 Ohm/166 Ohm 150~20 kHz 94 dB (1W/M) ABS resin

PST-220 D6323

Bi direction speaker 20W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

162 01_02A_DAP_100V_10_temp2011.indd 162

100V Speakers

RMS 20W 5, 10, 20W Two 6.5” paper/plastic cone speaker 50, 70, 100V 100V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm 70V-1 kilo-Ohm/500 Ohm /245 Ohm 50V - 500 Ohm /245 Ohm/125 Ohm 100~20 kHz 94 dB (1W/M) ABS resin

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

Pendant Sphere Speakers

The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops.

SPT-205 D6340

Spherical speaker 20W incl. 100V line transformer

This splash waterproof loudspeaker is designed to be suspended from ceiling via its 5 m 6-core connecting cable that is easy to shorten to the desired height. The cable clamp-and ceiling cover match the pendant sphere. Their radiation pattern makes them ideal for use in buildings with a high ceiling such as superstores. We strongly recommend not to install them in windy environments. The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops. Technical information: Input power: Output power: Speaker: Input voltage: Input Impedance:

Freq. response: S.P.L: Material: Weight:

RMS 20W/Max. 40W 5, 10, 20W/8 Ohm 5” wide band speaker 70V, 100V 100V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm 70V - 1 kilo-Ohm/500 Ohm /245 Ohm/8 Ohm 110~13 kHz (-10 dB) 92 dB (1W/M) ABS resin 1,8 kg

SPT-205B D6341

Spherical speaker 20W incl. 100V line transformer

The 360° swivel metal bracket is designed to be installed on walls. The spherical loudspeaker can this way be used in many public address applications like; supermarkets, shopping malls, pubs and restaurants. Bracket included! The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops. Technical information: Input power: Output power: Speaker: Input voltage: Input Impedance:

Freq. response: S.P.L: Material: Weight:

RMS 20W/Max. 40W 5, 10, 20W/8 Ohm 5” wide band speaker 70V, 100V 100V - 2 kilo-Ohm /1 kilo-Ohm /500 Ohm 70V - 1 kilo-Ohm /500 Ohm/245 Ohm /8 Ohm 110~13 kHz (-10 dB) 92 dB (1W/M) ABS resin 1,8 kg

CSHDT-30

CSHDT-60

4” speakers • Metal-plated equipped with 100V /70V line input • Special fireproof design with iron fire dome (UL 203) • Iron Net resisting heat up to 130°C • Power output: REM 20W/Max. 30W

6,5” speakers • Metal-plated equipped with 100V /70V line input • Special fireproof design with iron fire dome (UL 203) • Iron Net resiting heat up to 130°C • Power output: REM 40W/Max. 60W

D6310

4” ceiling speaker 30W incl. trafo, firedome, mounting rails

Technical Information Speaker: 4” - 16 Ohm polypropylene woofer Output power: 70V - 3.7, 7.5, 15, 30W 100V - 7,5, 15, 30W, COM Impedance: 1,327 kilo-Ohm/656 Ohm /328 Ohm/164 Ohm Input voltage: 70V/100V Freq. response: 100 - 20 kHz S.P.L: 86 dB (1M/W)

Mounting: Connection:

Dog ear flip tabs Removable screw terminal w/loop through output Incl. Accessories: C-shaped support plate & Tile support rails Dimensions (DxP): 212 x 176 per cage 165 mm Net Weight: 3,5 kg

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 163

D6311

6,5” ceiling speaker 60W incl. trafo, firedome, mounting rails

Technical Information Speaker: 6,5” - 16 Ohm polypropylene woofer Output power: 70V-7.5, 15, 30, 60W 100V-15, 30, 60W, COM Impedance: 656 Ohm /328 Ohm /164 Ohm /82 Ohm Input voltage: 70V/100V Freq. response: 100 - 20 kHz S.P.L: 92 dB(1M/W)

[100V P.A. Systems]

Mounting: Connection:

Dog ear flip tabs Removable screw terminal w/loop through output. Incl. Accessories: C-shaped support plate & Tile support rails Dimensions (DxP): 252 x 210 per cage 165 mm Cutting size ceiling hole diameter: 225 mm Net Weight (ea): 6,3 kg

163 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CS-315

CS-420

15W Column Speaker. 3 x 5” loudspeaker including 100V line transformer. The wide range loudspeakers have a high efficiency paper cone. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

15W Column Speaker. 4 x 5” loudspeaker including 100V line transformer. The wide range loudspeakers have a high efficiency paper cone. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

D6352

Column speaker 15W, 3 x 5”, incl. 100V line transformer

Technical Information Input power: RMS 15W Output power: 1, 2, 3.75, 7.5, 15W Speaker: 3 wide band speakers (5 x 7” oval) and 1 high efficiency paper cone speaker Input voltage: 25, 70, 100V Impedance: 100V - 10 kilo-Ohm/5 kilo-Ohm /2,67 kilo-Ohm /1,33 kilo-Ohm /670 Ohm 70V - 4,9 kilo-Ohm /2,5 kilo-Ohm /1,3 kilo-Ohm /650 Ohm /320 Ohm 25V-625 Ohm /312 Ohm /166 Ohm /83,5 Ohm /41,5 Ohm

164 01_02A_DAP_100V_10_temp2011.indd 164

Frequency resp.: S.P.L: Material: IP: Dimensions: Weight:

180 Hz ~ 20 kHz (-10 dB) 97 dB (1W/M) Aluminium IP-44 169 x 112 x 669 mm (LxWxH) 3,8 kg

100V Speakers

D6353

Column speaker 20W, 4 x 5”, incl. 100V line transformer

Technical Information Input power: RMS 20W Output power: 1.25, 2.5, 5, 10, 20W Speaker: 4 wide band speakers (5 x 7” oval) and 2 high efficiency paper cone speakers Input voltage: 25, 70, 100V Impedance: 100V - 8 kilo-Ohm/4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm/500 Ohm 70V - 3,9 kilo-Ohm/2 kilo-Ohm /1 kilo-Ohm/490 Ohm /245 Ohm/25V-500 Ohm /250 Ohm/125 Ohm /62.5 Ohm/31.3 Ohm

Frequency resp.: S.P.L: Material: IP: Dimensions: Weight:

160 Hz ~ 20 kHz (-10 dB) 98 dB (1W/M) Aluminium IP-44 indoor/outdoor 169 x 113 x 870 mm (LxWxH) 7,3 kg

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CS-412

CS-720

12W Column Speaker. 4 x 2,5” loudspeaker including 100V line transformer. An advanced filtering provides a controlled directivity and wide frequency range at the same time. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

20W Column Speaker. 7 x 2,5” loudspeaker including 100V line transformer. An advanced filtering provides a controlled directivity and wide frequency range at the same time. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

D6350

Column speaker 12W, 4 x 3”, incl. 100V line transformer

Technical Information Input power: RMS 12W Output power: 1.5, 3, 6, 12W Speaker: 4 wide band speakers of 70 mm diameter (2.5” paper cone speaker) Input voltage: 25, 70, 100V Impedance: 100V - 6,6 kilo-Ohm /3,3 kilo-Ohm /1,66 kilo-Ohm /833 Ohm 70V - 3,26 kilo-Ohm /1,63 kilo-Ohm /816 Ohm /408 Ohm 25V - 416 Ohm /208 Ohm /104 Ohm /52 Ohm

Frequency resp.: S.P.L: Material: Dimensions: Weight:

250 Hz ~ 20 kHz (-10 dB) 94 dB (1W/M) Aluminium 106 x 75 x 405 mm (LxWxH) 2,5 kg

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 165

D6351

Column speaker 20W, 7 x 3”, incl. 100V line transformer

Technical Information Input power: RMS 20W Output power: 2.5, 5, 10, 20W Speaker: 7 wide band speakers of 70 mm diameter (2.5” paper cone speaker) Input voltage: 25, 70, 100V Impedance: 100V - 4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm/500 Ohm 70V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm/250 Ohm 25V - 250 Ohm/125 Ohm /62 Ohm/31 Ohm

[100V P.A. Systems]

Frequency Resp.: S.P.L: Material: IP: Dimensions: Weight:

250 Hz ~ 20 kHz (-10 dB) 94 dB (1W/M) Aluminium IP44 indoor/outdoor use 106 x 75 x 619 mm (LxWxH) 3,8 kg

165 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

GS-515 D6361

GS-615

Garden Speaker 5â&#x20AC;? 15W

Technical Information Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: dimensions:

D6360

Garden Speaker 6â&#x20AC;? 15W

Technical Information Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: Dimensions:

130Hz - 16kHz 15 Watt 70 - 100V 93 dB 8 Ohm 5 inch 213 x 213 x 235 mm

LT-6 line transformer 100V/6W

120Hz - 16kHz 15 Watt 70 - 100V 94 dB 8 Ohm 6 inch 324 x 324 x 330 mm

LT-25 line transformer 100V/25W

D6400

D6401

Input voltage: Impedance: Output Impedance:

0, 70, 100V 100V - 6W (1,6 kilo-Ohm) 0, 4, 8, 16 Ohm

Input voltage: Impedance: Output Impedance:

0, 70, 100V 25W (400 Ohm) 0, 4, 8, 16 Ohm

100 Volt Volume Controllers

100V Line Volume control. Attenuation by transformer of 6W. Available models:

D6410

Volume Controller VC-6, 6W

D6411

Volume Controller VC-10, 10W

D6413

Volume Controller VC-30, 30W

Technical information: Model: Normal power: Controls: Input: Attenuation: Dimensions:

D6410 D6411 D6413 6W 10W 30W The Attenuator with transformer and with 11 positions and off 50V, 70V, 100V OFF, 3 dB 70 x 50 x 120 mm (LxWxH)

166 01_02A_DAP_100V_10_temp2011.indd 166

100V Speakers

[100V P.A. Systems] 07.03.11 09:20

Overview 100 00VV P.P.A. A. Sys yste tems te ms 100V Amplifiers MA15 MA15CD MA45CD PA90CDT PA100CD PA180 PA240 VPA-060 VPA-150 VPA-250 MXPA-80 MXPA-180 MPA-440 MPA-4150 MPA-4250

100V Hornspeakers

D6101

15W/4 Ohm PA Amplifier, 230V AC/12V DC

D6102

15W/4 Ohm Amplifier with CD/MP3 Player, 230V AC/12V DC

D6103

45W/100V Amplifier with CD/MP3 Player, 230V AC/12V DC

D6110

90W/100V Amplifier with CD/MP3 Player and Tuner, 230V AC/24V DC

D6111

100W/100V Amplifier with CD/MP3 Player, 230V AC

D6112

180W Amplifier with 4 Speaker Zone Controls, 230V AC

D6113

240W Amplifier with 4 Speaker Zone Controls, 230V AC

D4141

60W/100 Volt Power Amplifier

D4142

150W/100 Volt Power Amplifier

D4143

250W/100 Volt Power Amplifier

D6130

Multiplex professional PA Power Amplifier 80W

D6131

Multiplex professional PA Power Amplifier 180W

D6120

Multizone PA poweramplifier 4 x 40W

D6121

Multizone PA Power amplifier 4 x 150W

D6122

Multizone PA Power Amplifier 4 x 250W

100V Hornspeakers THD15 THD25 THD40 SHD25 SHD35 SHD40 PSH10T PSH15T PSH30T TH10T TH15T TH30T TH12 TH16 TH20 SH15

D6201

Round speaker horn 15W, 8 Ohm

D6202

Round speaker horn 25W, 8 Ohm

D6203

Round speaker horn 40W, 8 Ohm (complete assembled)

D6206

Square horn speaker, 25W, 8 Ohm

D6207

Square horn speaker, 35W, 8 Ohm

D6208

Square horn speaker, 40W, 8 Ohm (complete assembled)

D6211

ABS square horn speaker, 10W, 100V

D6212

ABS square horn speaker, 15W, 100V

D6213

ABS square horn speaker, 30W, 100V

D6216

IP66 Round speaker horn 10W, 100V

D6217

IP66 Round speaker horn 15W, 100V

D6218

IP66 Round speaker horn 30W, 100V

D6221

Round trumpet horn 30 cm diameter

D6222

Round trumpet horn 40 cm diameter

D6223

Round trumpet horn 50 cm diameter

D6224

Square trumpet horn 38 x 23 cm

Overview 01_02A_DAP_100V_10_temp2011.indd 167

HD35T HD60T HD80T SVC35 SVC40 SVC15 SVC30 SVC60 SVC100

D6226

Driver 35W, 100V transformer

D6227

Driver 60W, 100V transformer

D6228

Driver 80W, 100V transformer

D6233

Spare voice coil for TH15T, SHD25, SHD35, THD25

D6234

Spare voice coil for TH40, SHD40

D6231

Spare voice coil for TH10T, PSH10T, PSH15T

D6232

Spare voice coil for TH30T, PSH30T

D6235

Spare voice coil for SHD35 & HD60T

D6236

Spare voice coil for HD80T

100V Speakers PR-32T PR-32T PR-52T PR-52T PR-62T PR-62T PR-82T PR-82T PMT-42 PMT-42 PMT-62 PMT-62 PMT-82 PMT-82 CST-510 CST-515 CST-610 CST-615 CST-6506 CSE-610 E CSE-506 E CST-6512 CST-6520 CST-206 CST-206 PST-115 PST-120 PST-215 PST-220 SPT-205 SPT-205B CSHDT-30 CSHDT-60 CS-315 CS-420 CS-412 CS-720 GS-615 GS-515

D3531

15W - This set contains 2 pcs. Black

D3532

15W - This set contains 2 pcs. White

D3533

15W - This set contains 2 pcs. Black

D3534

15W - This set contains 2 pcs. White

D3535

30W - This set contains 2 pcs. Black

D3536

30W - This set contains 2 pcs. White

D3537

30W - This set contains 2 pcs. Black

D3538

30W - This set contains 2 pcs. White

D3820B Moulded Speakers - 2 pcs, Black D3820W Moulded Speakers - 2 pcs, White D3822B Moulded Speakers - 2 pcs, Black D3822W Moulded Speakers - 2 pcs, White D3823B Moulded Speakers - 2 pcs, Black D3823W Moulded Speakers - 2 pcs, White D6260

5,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6261

5,5” ceiling speaker 15W incl. 100V line transformer, firedome

D6270

6,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6271

6,5” ceiling speaker 15W incl. 100V line transformer, firedome

D6280

6,5” ceiling speaker quickmount 6W incl. 100V line transformer

D6290

6” Economical Ceiling Speaker 6-10W

D6291

5” Economical Ceiling Speaker 3-6W

D6281

6,5” ceiling speaker quickmount 12W incl. 100V line transformer

D6282

6,5” ceiling speaker quickmount 20W incl. 100V line transformer

D6250W White 2,5” ceiling speaker 6 W incl. 100V line transformer D6250G Gold 2,5” ceiling speaker 6 W incl. 100V line transformer D6320

Uni direction speaker 15W incl. 100V line transformer

D6321

Uni direction speaker 20W incl. 100V line transformer

D6322

Bi direction speaker 15W incl. 100V line transformer

D6323

Bi direction speaker 20W incl. 100V line transformer

D6340

Spherical speaker 20W incl. 100V line transformer

D6341

Spherical speaker 20W incl. 100V line transformer

D6310

4” ceiling speaker 30W incl. trafo, firedome, mounting rails

D6311

6,5” ceiling speaker 60W incl. trafo, firedome, mounting rails

D6352

Column speaker 15W, 3 x 5”, incl. 100V line transformer

D6353

Column speaker 20W, 4 x 5”, incl. 100V line transformer

D6350

Column speaker 12W, 4 x 3”, incl. 100V line transformer

D6351

Column speaker 20W, 7 x 3”, incl. 100V line transformer

D6360

Garden Speaker 6” 15W

D6361

Garden Speaker 5” 15W

[100V P.A. Systems]

167 07.03.11 09:20

Speakercomponents Har ardw dwar dw aree ar DD-1 driver D3188 Freq. Range: Impedance: Music Power: Power rating: SPL (1W/1m): Dimensions: Mounting depth: Weight:

VC-1 driver Voice coil for DD-1 1800-20 kHz 8 Ohm 250W 150W 106 dB 110 x 74 mm 59 mm 1,45 kg

D3183 Dimensions: Mounting Depth: Weight:

80 x 37 mm 25 mm 0,1 kg

DP-8 Piezo Driver 8 cm

DP-12 Piezo Driver 12 cm

D3119 Freq. Range: Voltage: Max. Power: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Mounting depth: Dimensions: Weight:

D3142 Freq. Range: Voltage: Max. Power: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Mounting depth: Dimensions: Weight:

1800 - 20 kHz 35V~ 150W 100W 93 dB 42 mm 65 x 65 mm 200 g

1800 - 20 kHz 35V~ 150W 100W 93 dB 65 mm 100 x 75 mm 200 g

HP-1 Horn 110 x 265 mm, fits to DP-8 or DP-12

HP-2 Horn 129 x 386 mm, fits to DP-8 or DP-12

D3117 Baffle cut-out: Mounting depth: Dimensions: Weight:

D3118 Baffle cut-out: Mounting depth: Dimensions: Weight:

85 x 233 mm 164 mm 110 x 265 mm 200 g

HP-3 Horn 177 x 354 mm, fits to DP-8 or DP-12

HP-4 Horn

D3130 Baffle cut-out: Mounting depth: Dimensions: Weight:

D3129 Dimensions: Baffle cut-out: Mounting depth: Weight:

143 x 323 mm 205 mm 354 x 205 x 178 mm 600 g

100 x 350 mm 155 mm 129 x 386 mm 520 g

245 x 465 mm 200 x 420 mm 295 mm 0,95 kg

P-1 Piezo Tweeter

P-2 Piezo Tweeter with horn

D3115 Freq. Range: Voltage: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Baffle cut-out: Mounting depth: Dimensions: Weight:

D3116 Freq. Range: Voltage: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Baffle cut-out: Mounting depth: Dimensions: Weight:

4000 - 20 kHz 35V 150W 100W 92 dB 74 mm 70 mm 85 x 85 mm 80 g

1800-20 kHz 35V 150W 100W 92 dB 52 x 140 mm 100 mm 80 x 186 mm 120 g

Speakergrill

Technical information:

D5405 :

Available models:

D5405 D5404 D5403 D5402 D5401

inner Ø : outer Ø :

6” 8” 10” 12” 15”

D5404 :

inner Ø : outer Ø :

D5403 :

inner Ø : outer Ø :

D5402 :

inner Ø : outer Ø :

D5401 :

inner Ø : outer Ø :

168 01_03_DAP_Hardware_10_temp2011.indd 168

Speakercomponents

135 mm 160 mm 175 mm 205 mm 235 mm 260 mm 285 mm 310 mm 360 mm 386 mm

[Hardware] 07.03.11 10:16

Speakercomponents Har ardw dwar dw aree ar MB-8 Speaker D3111 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

MB-10 Speaker 8 Ohm 90 - 7000 Hz 4000 Hz 100W 75W 97 dB 203 mm 184 mm 75 mm 1,26 kg

D3112 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

8 Ohm 60 - 4500 Hz 2000 Hz 175W 125W 97 dB 255 mm 232 mm 105 mm 2,2 kg

MB-12 Speaker

MB-15 Speaker

D3113 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3114 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

8 Ohm 40 - 4000 Hz 2000 Hz 300W 200W 98 dB 306 mm 280 mm 115 mm 2,84 kg

8 Ohm 40 - 4000 Hz 1000 Hz 350W 250W 101 dB 385 mm 353 mm 129 mm 3,84 kg

MB-15B Speaker

AB-12 Speaker

D3182 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3144 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut out: Mounting depth: Weight:

8 Ohm 35 - 4000 Hz 1000 Hz 500W 300W 102 dB 385 mm 349 mm 144 mm 5,14 kg

8 Ohm 35 - 4000 Hz 1000 Hz 500W 300W 102 dB 310 mm 280 mm 115 mm 4,8 kg

AB-15 Speaker

PCX-1 Passive Crossovers

D3145 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3191 Bass crossover 500 Hz/12 dB, max. 300W

8 Ohm 35 - 4000 Hz 1000 Hz 600W 400W 103 dB 390 mm 350 mm 145 mm 7,58 kg

PCX-2 Passive Crossovers

PCX-3 Passive Crossovers

D3192 Bass crossover 300 Hz/12 dB, max. 300W

D3193 2-Way crossover 4500 Hz/6/18 dB, max. 300W

PCX-4 Passive Crossovers

PCX-5 Passive Crossovers

D3194 3-Way crossover 800 Hz - 6000 Hz/12 dB, max. 300W

D3195 3-Way crossover 500 Hz - 4500 Hz/12 dB, max. 300W

Speakercomponents 01_03_DAP_Hardware_10_temp2011.indd 169

[Hardware]

169 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Eco Speakerstand 35 mm

Technical information:

D8320

NEW PRODUCT

D8322

NEW PRODUCT

170 01_03_DAP_Hardware_10_temp2011.indd 170

Technical information:

D8321

Speakerstand Pro 38-41 mm

Speakerstand 35-38 mm

NEW PRODUCT

Technical information:

Wind Up Speaker Stand

Technical information:

D8323

NEW PRODUCT

Speakerstands

[Hardware] 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Speaker Stand D8401C

Speaker Stand set D8425

bag

Technical information:

Aluminium 1,1-1,86 m/ 20 kg

Speaker Stand D8409B

Technical information:

Black 1,34 - 2,08 m/ 30 kg

Technical information:

Max. Load: Diameter: Length: Weight:

Weight: Max. Load: Diameter: Length:

20 kg 35 mm Max. 1,86 m 1,64 kg

Technical information:

Incl. Speakercable and carrying

Air Pressure Speaker Stand

6,44 kg 30 kg 35 mm Max. 2,08 m

Technical information:

D8426

A complete set to connect and mount your speakers. The set comes including two speaker stands, 2 speaker cables with 2 pole speaker connectors and 6 meter 2x 1,5mm2 cable and a carrying bag.

Technical information:

Tube size: Min. height: Max. height: Leg length:

Height: Load Capacity: Material: Safety: Tube Diameter:

35 mm 1250 mm 1850 mm 680 mm

Speakerstands 01_03_DAP_Hardware_10_temp2011.indd 171

[Hardware]

1300 - 1900 mm 40 kg Aluminium Snap Lock Holder 35 mm

171 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Wind up speakerstand M20 Thread

Technical information:

Speaker Stand Set D8324

D8427

NEW PRODUCT

Technical information:

Incl. Bag

Technical information: Thread: M20 Tube diameter: 35mm Colour: Black Material: Metal Minimum height: 84 cm Maximum height: 142 cm Maximum load: 38 kg

172 01_03_DAP_Hardware_10_temp2011.indd 172

Speakerstands

[Hardware] 07.03.11 10:17

Speakerstand-Accessories Har ardw dwar dw aree ar Inner Adapter Metal

Inner Adapter Alu.

Inner adapter 35 mm, mounting Ø110 mm

Inner adapter 38 mm, mounting Ø110 mm

35 mm

Flying Eye

Distance tube

D5505

Small

D8428

Outer Adapter Plastic

D5506

D8418

D8404

Big

Bottom screw fitting

180 x 120 mm, outer adapter

D5502

D8405

With M-20 thread 0,91 - 1,46

105 x 105 mm

Measurements:

Speakerstand Tilt Adapter D8420

Tilt adjustable from 0° until 15° for speaker stands with 36 mm tube diameter. Secured by 2 handknobs. Technical information:

D8420 :

Weight: Height:

0,5 kg 235 mm

Speaker Wall Bracket D8415

25 Kg

Measurements:

Adjustable Speakerbracket D8412

50 kg

Measurements:

Speakerstand-Accessories 01_03_DAP_Hardware_10_temp2011.indd 173

Adjustable Speakerbracket D8413

30 kg

Measurements:

[Hardware]

173 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar

Eco Microphones stand with Pro Microphone stand with telescopic boom telescopic boom D8301

NEW PRODUCT

Technical information:

174 01_03_DAP_Hardware_10_temp2011.indd 174

D8304

normal

NEW PRODUCT

Technical information:

Microphonestands

[Hardware] 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar

Pro Microphone stand with telescopic boom D8305

short

Technical information:

NEW PRODUCT

Microphone pole le with ith coun- Microphone stand for overtrweight head Technical information:

Microphonestands 01_03_DAP_Hardware_10_temp2011.indd 175

NEW PRODUCT

D8306

[Hardware]

D8307

NEW PRODUCT

Technical information:

175 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar Microphone Stand Ergo1

Technical information:

D8111B

Desk Mic. Stand

Straight, Chrome, 20 cm/1,5 kg, + adj. Gooseneck D8203C

176 01_03_DAP_Hardware_10_temp2011.indd 176

Microphone Stand Ergo2

Technical information:

D8112B

Technical information:

Height: 905-1600 mm Arm Length: 580-900 mm Base: Metal Two section boom-arm. Ergonomic rubber grips

Height: 415-660 mm Arm Length: 580-890 mm Base: Metal Two Section boom-arm Ergonomic rubber grips

Desk Mic. Stand, Gooseneck D8201C

Chrome, 30 cm/1 kg

Desk Mic. Stand Straight, Adj. D8202C

Microphonestands

Chrome, 37 cm/0,8 kg

Desk Mic. Stand D8204C

Boomarm

Chrome, 1,5 kg, + adj.

[Hardware] 07.03.11 10:18

Microphonestands Har ardw dwar dw aree ar Mic. Stand 160 cm

Technical information:

Chrome, 96-160 cm, adj. Boomarm 53-93 cm + Baseplate, 3 kg D8105C

Quick Lock Microphone Stand

Technical information:

D8115B min. 1020mm - max. 1670mm length, 2,4 kg

160cm

Technical information:

Technical information: Min. length: Max. length: Weight:

Mini Desk Mic. Stand D8205C

Chrome, 15-20 cm

Mini Desk Mic. Stand D8206C

Microphonestands 01_03_DAP_Hardware_10_temp2011.indd 177

Chrome, 15 cm

[Hardware]

1020 mm 1670 mm 2,4 kg

Mini Desk Mic. Stand D8207C

Chrome, 8 cm

177 07.03.11 10:18

Microphonestands Har ardw dwar dw aree ar Broadcasting Stand

Technical information:

D8110

Gooseneck 30 cm D8901B D8901C

Black Chrome

XLR Gooseneck 30 cm D8906B D8906C

Female/Male, Black Female/Male, Chrome

Gooseneck 40 cm D8902B D8902C

Black, screw Chrome, screw

XLR Gooseneck 40 cm D8907B D8907C

Female/Male, Black Female/Male, Chrome

Guitar cabinet mic clamp D8121

â&#x20AC;˘ Allows precisive mic positioning.

NEW PRODUCT

178 01_03_DAP_Hardware_10_temp2011.indd 178

Microphonestands

[Hardware] 07.03.11 10:18

Mic.stand-Accessories Har ardw dwar dw aree ar Microphone holder D8940

28 mm

Microphone holder D8944

Spring

Microphone Holder D8927

3/8 and 5/8 Thread ø 25 mm

Snap Clamp Basic D8981

Clamp for drums, amps, etc.

Microphone holder D8941

22 mm

Microphone Holder D8924

5/8 Thread ø 25 mm

Microphone holder D8945

Anti-Shock

Microphone Holder D8920

5/8 Thread ø 22 mm, flexible

Mic. T-bar D8962

Multi-purpose clamp for drums, amps, etc. D8982

Double Goose Snap Clamp 120 D8986

With 120 mm gooseneck

D8942

32 mm Flexible

Microphone Holder D8925

5/8 Thread ø 28 mm

Shockmount D8923

Microphone Clamp D8921

D8961

Goose Snap Clamp 80 D8983

With 80 mm gooseneck

5/8 Thread

For 2 Microphones

With 120 mm gooseneck

Mounting Plate 60 mm for Gooseneck D8911B

Black

D8911C

D8943

Microphone Holder D8926

5/8 Thread ø 25 mm

D8987

Microphone Holder D8922

D8963

5/8 Thread ø 30 mm, flexible

For 1 Microphone

Double Goose Snap Clamp 80 D8985

With 80 mm gooseneck

Thread Adapter Chrome

D8951 D8952 D8953

Mic.stand-Accessories 01_03_DAP_Hardware_10_temp2011.indd 179

22 mm Flexible

Mic. adapter clamp

Goose Snap Clamp 120 D8984

Microphone holder

Snap Clamp for Standmounting

With 5/8 Thread

Mic. T-bar

For 4 Microphones

Double Snap Clamp

Microphone holder

[Hardware]

From 5/8 to 3/8 From 3/8 to 5/8 Inner Mounting From 3/8 to 5/8

179 07.03.11 10:18

Stand Miscellaneous Har ardw dwar dw aree ar

NEW PRODUCT

Eco Music Stand D8350

Incl bag

Technical information:

NEW PRODUCT

Music Stand D8351

Incl Bag

Technical information:

NEW PRODUCT

Music Stand Pro D8352

Technical information:

Combo-Amp.Stand D8555

180 01_03_DAP_Hardware_10_temp2011.indd 180

Stand Miscellaneous

Heavy Duty Max. 20 kg

[Hardware] 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar Equipment Stand D8551

Mixer Shelf with Wheels

Adjustable

D8560

Keyboard Bench Pro

NEW PRODUCT

D8362

Rackstand Stand

NEW PRODUCT

D8372

Technical information:

Combo-Amp. Stand D8554

Max. 10 kg

Foot stand Guitar Player D8373

Technical information:

NEW PRODUCT

Stand for acoustic Guitar D8374

NEW PRODUCT

Stand for electric Guitar D8375

NEW PRODUCT

Weight: 1,62 kg

Stand Miscellaneous 01_03_DAP_Hardware_10_temp2011.indd 181

[Hardware]

181 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar Keyboard Stand Double Layer D8360

Rackstand / Keyboard Stand D8371

NEW PRODUCT

Keyboard Stand With 2 levels D8504 Dimensions: Max load: Weight:

182 01_03_DAP_Hardware_10_temp2011.indd 182

Stand Miscellaneous

240 min./ 825 max. x 660 mm (LxW) 22 kg 7,6 kg

[Hardware] 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar

Professional keyboard stand D8507

NEW PRODUCT

This keyboard stand is compact to transport, easy to setup and looks very stylish instead of the usual stands. It can hold 2 keyboards in adjustable heights. The feet are inside the column and the tri-bar arms can also be folded into the column. At the top of the column is a microphone adapter that can be used to mount a gooseneck. Technical information:

D8507 : Maximum load: 30Kg on each keyboard layer Weight: 7,75 Kg Measurements folded: 1105 x 120 x 150 mm (HxWxD)

Keyboard Stand Ergo1

Keyboard Stand Ergo2

D8505 Height: 570 - 980 mm Arm Length: 400 mm (diameter 28 mm) Material: Steel Max load: 30 kg Easy locking and height adjust system. For small / medium keyboards.

D8506 Height: 5700 - 975 mm Arm Length: 400 mm (diameter 28 mm) Transport length: 997 mm (stand folded) Material: Steel Max load: 30 kg Easy locking and height adjust system. For medium/big keyboards.

Stand Miscellaneous 01_03_DAP_Hardware_10_temp2011.indd 183

[Hardware]

183 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

Metal Equipment-Racks • 19 inch Professional Equipment Rack • 1.2 mm mat powder coated metal frame body • Strong double mounting rail on front and backside • Ventilation: side covers • 4 rubber feet and 4 swivel wheels included • Disassembled packing (carton + woodbox protection) Available models:

D7600

12U (560 x 460 x 645 mm),

18 kg

D7601

16U (560 x 460 x 825 mm),

22,5 kg

D7602

20U (560 x 460 x 1000 mm), 26 kg

D7603

24U (560 x 460 x 1180 mm), 29 kg

D7604

28U (560 x 460 x 1365 mm), 31,5 kg

D7605

32U (560 x 460 x 1545 mm), 34,5 kg

D7606

36U (560 x 460 x 1750 mm), 37 kg

D7607

40U (560 x 460 x 1900 mm), 39,5 kg

184 01_03_DAP_Hardware_10_temp2011.indd 184

Gear Racks

[Hardware] 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

Pro Metal Equipment Rack Series • 19 inch Professional Equipment Rack • 1 Organic glass door, 3 metal sides with ventilation 1,2mm • 1.5 mm mat powder coated metal frame body • Strong double mounting rail on front and backside • 4 rubber feet and 4 swivel wheels included • Disassemble packing (carton + woodbox protection) Available models:

D7620

12U (585 x 585 x 655 mm),

30 kg

D7621

16U (585 x 585 x 955 mm),

33,5 kg

D7622

20U (585 x 585 x 1130 mm),

40 kg

D7623

24U (585 x 585 x 1310 mm),

47,5 kg

D7624

28U (585 x 585 x 1490 mm),

53 kg

D7625

32U (585 x 585 x 1675 mm),

61 kg

D7626

36U (585 x 585 x 1850 mm),

70 kg

D7627

40U (585 x 585 x 2020 mm),

85 kg

Gear Racks 01_03_DAP_Hardware_10_temp2011.indd 185

[Hardware]

185 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

19” Server Cabinet

19” Server Cabinet Available models:

Available models:

D7630

Glass Door 18U, 600 x 815 x 995mm (LxWxH)

D7640

Mesh Door 18U, 600 x 815 x 995mm (LxWxH)

D7631

Glass Door 22U, 600 x 815 x 1175mm (LxWxH)

D7641

Mesh Door 22U, 600 x 815 x 1175mm (LxWxH)

D7632

Glass Door 32U, 600 x 815 x 1625mm (LxWxH)

D7642

Mesh Door 32U, 600 x 815 x 1625mm (LxWxH)

D7633

Glass Door 42U, 600 x 815 x 2075mm (LxWxH)

D7643

Mesh Door 42U, 600 x 815 x 2075mm (LxWxH)

19” Wallmount Server Available models:

186 01_03_DAP_Hardware_10_temp2011.indd 186

Gear Racks

D7650

Cabinet 9U, 600 x 600 x 500mm (LxWxH)

D7651

Cabinet 15U, 600 x 600 x 770mm (LxWxH)

[Hardware] 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar 1U Digital Temperature Unit D7680

1U Digital Temperature Unit. 1U Unit Digitale Temperature Unit which measures the temperature in your rack and can switch on off external fans (not included) by the programmable temperatures. Including external temperature sensor. Technical information: Temperature Range: Input: Output: Power: Voltage: Size:

0-50 degrees PTC (10kOhm) (included) 2x IEC female connector 3W 230V 19” 1U

1U Fan Unit D7681

control

with 4 fans and temperature

1U Digital Temperature Unit. 1U Unit Digitale Temperature Unit which measures the temperature in your rack and can switch on and off the four build in fans by the programmable temperature settings. Including external temperature sensor. Technical information: Temperature Range: Input: Power: Voltage: Size:

0-50 degrees PTC (10kOhm) (included) 3W 230V 19” 1U

19” 3U Switch Box D7889

A 19” 3U mounting box to mount all your switches and circuitbreakers on a DIN rail. Height: Size: Weight: Finishing:

19” 6 way socketbox D7682

19” 6 way socketbox

Schuko socket, 1,5 U

D7683

Shelf fixed for 19” Server Rack D7684

D7685

D7617 Measurements: 43 x 455 x 420 (HxWxD) Material: 1,5 mm Steel, Black powder Weight: 2,7 Kg

D7687

NEW PRODUCT

2U Shelf for Metal Racks D7618

NEW PRODUCT

Measurements: 86 x 455 x 420 (HxWxD) Material: 1,5 mm Steel, Black powder Weight: 3 Kg

Gear Racks 01_03_DAP_Hardware_10_temp2011.indd 187

Cable entry with brush

1U Shelf for Metal Racks

BS-613 (UK) socket, 1,5 U

Shelf sliding for 19” Server Rack

Adjustable keyboard drawer D7686

3U 484 x 135 x 65 mm (LxWxH) 1,81 kg Black powder coating (matt)

[Hardware]

187 07.03.11 10:19

19 inch Hardware Har ardw dwar dw aree ar 19 inch Blindpanel Black Availlable models:

D7801 D7802 D7803 D7804

1U 2U 3U 4U

19 inch Ventilationpanel Black Availlable models:

D7806

D7807

19 inch Ventilationpanel Alu Availlable models:

19 inch Blindpanel Alu Availlable models:

D7850 D7851 D7852 D7853

1U 2U 3U 4U

D7854

D7855

19 inch Ventilationpanel Blue Availlable models:

D7864

D7865

19 inch Connector-panel Availlable models:

D7811 D7812

19 inch Blindpanel Blue Availlable models:

D7860 D7861 D7862 D7863

1U, for 8 XLR Connectors (D-Size) 2U, for 16 XLR Connectors (D-Size)

19 inch Multi-connector-panels 2U D7816

1U 2U 3U 4U

For 2 x 16 pin multiconnectors

19 inch Coverbox 3U D7817

Protectionpanel Availlable models:

D7870 D7871 D7872 D7873

19”/1U 19”/2U 19”/3U 19”/4U

188 01_03_DAP_Hardware_10_temp2011.indd 188

For 6 x PG16 & 6 x PG21

Protectionpanel With Locker Availlable models:

D7866 D7867 D7868 D7869

19 inch Hardware

19”/1U 19”/2U 19”/3U 19”/4U

[Hardware] 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar PowerPanel 1 51000

19” Panel for 12 pieces D-size with coding

Technical information: 19” rack mount/1U 12 holes to fit Neutrik Powercon or Speakon socket (not included) Black epoxy-powder finish 48 pieces marking stickers included

PowerPanel 2 51001

19” Panel with 2 pieces Socapex and cabling left

Technical information: 19”rack mount/ 2HE 4 holes to fit socapex (19-pin) socket Includes 2 pre-wired socapex connectors Each connector is fully wired with 19 x 2 meter cables 8 Pieces marking plate included Black epoxy-powder coating

PowerPanel 3 51002

19” Panel with 4 pieces Socapex and cabling left

Technical information: 19”rack mount/ 2HE 4 holes to fit socapex (19-pin) socket Includes 4 pre-wired socapex connectors Each connector is fully wired with 19 x 2 meter cables 8 Pieces marking plate included Black epoxy-powder coating

PowerPanel 4 51003

19” Panel with 6 pieces CEE 3 pin 16A connector

Technical information: 19” rack mount/2U 6 x CEE 16A 3-pin female socket Black epoxy powder finish 48 pieces marking plate included Cables included

PowerPanel 5 51004

19” Panel with 6 pieces BS-13 connector

Technical information: 19” rack mount/2U 6 x 13A 3-pin BS 1363 female socket Black epoxy-powder finish Fittings included 48 pieces marking plate included Cables included

PowerPanel 6 51005

19” Panel with 6 pieces BS-15 connector

Technical information: 19” rack mount/2U 6 x 15A 3-pin BS 546 female socket Black epoxy powder finish Fittings included 48 pieces marking plate included Cables included

19 inch Hardware 01_03_DAP_Hardware_10_temp2011.indd 189

[Hardware]

189 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar MP-1 D7701

Masterpanel excl. Rear Cover

Technical information: 19â&#x20AC;? 2U 1,5 mm steel, black powder coated incl. 20 screws

Rear Cover D7702

For master panel 2U

Technical information: 19â&#x20AC;? 2U 65 mm deep

D-Size panel D7716

1 segment

Ventilation panel 2 segments D7710

2 segment x 2U

Speakon panel 2 segments D7728

6 pole, 2 segments

CEE 16 Amp panel 2 segments D7725

3 Pin

Blank panel D7706

D7717

1 segment

190 01_03_DAP_Hardware_10_temp2011.indd 190

2 segments

Jack panel D7711

2 x Jack, 1 segment

Socapex panel 2 segments D7727

Multiconnector panel D7734

D-Size panel

Male/Female

Multiconnector panel D7733

10 pole, 4 segments

IEC panel 1 segment D7721

Male

Jack panel D7712

4 x Jack, 2 segments

Chassis panel 2 segments D7723

Bulgin

Multiconnector panel D7732

16 pole, 4 segments

IEC panel 1 segment D7722

Female

Jack panel D7713

6 x Jack, 2 segments

Chassis panel 2 segments D7724

Schuko

Multiconnector panel D7731

24 pole, 4 segments

CEE 16 Amp panel 2 segments D7726

5 Pin

Blank panel D7707

2 segments

Blank panel D7708

19 inch Hardware

4 segments

[Hardware] 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar 19 inch Drawer D7831 D7832 D7833

1U 2U 3U

19 inch Mountingpanel D7821 D7822 D7823

For non-19” Equipment, 1U For non-19” Equipment, 2U For non-19” Equipment, 3U

19 Inch Drawer with keylock D7840 D7841 D7842 D7843 D7844

1U (483 x 350 x 44 mm, LxWxH)/5,7 kg 2U (483 x 350 x 88 mm, LxWxH)/6,7 kg 3U (483 x 350 x 132 mm, LxWxH)/7,7 kg 4U (483 x 350 x 176 mm, LxWxH)/8,7 kg 6U (483 x 350 x 267 mm, LxWxH)/10,5 kg

Blindcap for D Hole D7881

M6 Screw 20 mm D7883

Black

D7884

Nickel

Mounting Set

10 x Screwbolt, nut and protectionring

D8011 100 x Screwbolt, nut and protectionring

D8010

M6 Plastic Protection Ring D7885 Mounting Set:

10 x Screw bolt, nut and protection ring

Weight net: (10 x mounting set in poly bag): 0,15 kg Weight gross (carton 80x poly bag): 8 kg

Laptop Stand D8370

NEW PRODUCT

19 inch Keyboard-drawer D7830

19 inch Hardware 01_03_DAP_Hardware_10_temp2011.indd 191

Mounting Set: 100 x Screw bolt, nut and protection ring Weight net: (100 x mounting set in carton box): 1,5 kg

Panel for Computer Keyboard

[Hardware]

191 07.03.11 10:21

Flightcase Hardware Har ardw dwar dw aree ar Egg Foam Set of 2 sheets of 1,5mx2m D6901

D6902

Eggfoam, grey 30 mm. thick Size of sheet 1500 x 2000 mm. One package contains 2 sheets.

Pearl Foam 20mm Sheet: 1m x 1.3m D6903

Softfoam, grey 20 mm. thick Size of sheet 1500 x 2000 mm.

Hard Foam 10mm Sheet: 1,15m x 1.5m D6904

Pearlfoam. Grey 20 mm. thick Ideal to glue multiple layers together to customize your flightcase. Size of sheet 1000 x 1300 mm.

Sliding Profile for Flightcase Length: 2m D6900 Material: Dimensions:

Soft Foam 20mm Sheet: 1,5mx2m

Hard Foam. Grey 10 mm. thick Ideal to glue multiple layers together to customize your flightcase. Size of sheet 1150 x1500 mm.

Blue Wheel, 100 mm D8001

Swivel, without brake

Blue Wheel, 100 mm D8002

Swivel, with brake

Aluminium 3,5 x 1,8 x 200 cm

Blue wheel without brake 100 mm Weight net (1 pcs): 1,1 kg Weight gross (carton 20 pcs): 24 kg

192 01_03_DAP_Hardware_10_temp2011.indd 192

Flightcase Hardware

Blue wheel with brake 100 mm Weight net (1 pcs): 1,3 kg Weight gross (carton 12 pcs): 15,9 kg

[Hardware] 07.03.11 10:21

Flightcase Hardware Har ardw dwar dw aree ar Butterfly Lock Large D5120

NEW PRODUCT

Fliphandle D5129

Butterfly Lock 80x80mm D5121

NEW PRODUCT

Flightcase Lock Small

NEW PRODUCT

D5122

Fliphandle 140x84mm Polish D5128

NEW PRODUCT

LED Snakelight Blue/White 60729

4x blue LED’s, 4x white LED’s

Make your LED gooseneck light more versatile with this special head. It has two colours LED built-in as well a switch which makes it possible to switch your gooseneck light into Blue colour, White colour or mixed colour.

LED Minilight USB Available models:

LED Minilight XLR Available models:

60720

Gooseneck lamp with White LED

60722

Gooseneck lamp with White LED

60721

Gooseneck lamp with Blue LED

60723

Gooseneck lamp with Blue LED

Flexible gooseneck LED light. It’s handy for notebook or computer users to work in dimly lit areas.

Flexible gooseneck lamp. It is bright enough for DJ & professional users to work in dimly lit areas

Technical information:

4 Led’s Length: Beam: Voltage:

4 Led’s Length: Voltage: Power: Connection:

Connection:

18” flexible angle runs on DC5 voltage at 20 mA current with USB connector

LED Minilight BNC Available models:

12” 12V DC 12V at 400 mA - 450 mA, 5W 3P XLR type

LED Minilight Set Deskmount Available models:

60724

Gooseneck lamp with White LED

60730

White LED

60725

Gooseneck lamp with Blue LED

60731

Blue LED

Flexible gooseneck lamp. It is bright enough for DJ & professional users to work in dimly lit areas

220V, Dimmer On/Off Switch

Technical information:

4 Led’s Length: Voltage: Power: Connection:

4 Led’s Voltage: Power:

12” 12 Volts 12V at 400 mA - 450 mA, 5W BNC

Flightcase Hardware 01_03_DAP_Hardware_10_temp2011.indd 193

12V 12V at 400 mA 5W

[Hardware]

193 07.03.11 10:21

Gear & Rack Lights Har ardw dwar dw aree ar 19” Rackmount LED Minilight with dimmer Available models:

60740

White LED

60741

Blue LED

19” (1U) Rack lighting with double gooseneck LED-lamp, seashell type and dimmer ON-OFF switch. Using 4 LED’s, replaceable head-light, 360 degree rotatable head-light, Super brilliant, easy to operate, high efficiency with low energy costs and durable for long lasting usage. Technical information: 19” x 1U 4 LED’s Dimmer ON-OFF switch 360 degree rotatable head-light replaceable head-light 220V

Snakelight

Snakelight wide shade

shade

Flexible Snakelight with wide shade beam and powerful light performance.

Snakelight Narrow Shade

Flexible Snakelight with narrow shade beam and powerful light source.

Flexible Snakelight with narrow shade beam and powerful light performance.

60701

Complete set dimmable/wide

Flexible Snakelight with wide shade beam and powerful light performance.

Snakelight narrow shade

Complete set dimmable/BNC narrow shade 60702

Flexible Snakelight with narrow shade beam and powerful light performance.

194 01_03_DAP_Hardware_10_temp2011.indd 194

60706

60711

XLR connector

60707

60712

Gear & Rack Lights

BNC connector

60708

60713

Tablemount

Table mount

[Hardware] 07.03.11 10:21

Roady & tool Bags Bag agss & Ca Case sess se

Toolbag S D6632

Small bag for waistbelt

Toolbag M D6631

Medium bag for waistbelt

Technical Information

Dimensions: 50 x 40 x 150mm (LxWxH)

Dimensions: 75 x 50 x 170mm (LxWxH)

Toolbag L D6630

Large bag for waistbelt

Toolbag XL D6629

Extra large bag for waistbelt

Technical Information

Dimensions: 100 x 50 x 200mm (LxWxH)

Dimensions: 150 x 70 x 200mm (LxWxH)

Toolbag waistbelt

Roady Gloves Available models:

Size: Small, leather roadproof working gloves

D6634 D6634L D6634XL

Roady & tool Bags 01_04_DAP_Bagscases_10_temp2011.indd 195

Belt for toolbags

D6633

Min. 95 cm Max. 110 cm

Size: Large, leather roadproof working gloves Size: Extra Large, leather roadproof working gloves

[Bags & Cases]

195 07.03.11 10:32

Roady & tool Bags Bag agss & Ca Case sess se

Compact Tool Pouch D6620

For on-the-road

• Compact Tool Pouch • Heavy duty Nylon material • Handy tool for each Job on the road

Radio Pouch

Perfect to carry your communication systems D6624

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying many brands communication systems

Beverage Can Holder

AC Pouch

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying all types of soda cans

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying flashlights, Palmtop, etc.

D6628

For Soda Cans

D6623

Small

Technical information:

Dimensions:

160 x 80 x 240 mm (LxWxH)

80 x 150 mm (LxH)

AC Pouch

Rolling Tool Bag

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying flashlights, Palmtops, etc.

• Rolling Tool Bag • Heavy duty Nylon material • Handy tool for each Job on the road • Touch Carrying Handle • Solid Wheels • Retractable Handle for easy rolling

D6622

Big

D6621

Technical information:

Dimensions:

196 01_04_DAP_Bagscases_10_temp2011.indd 196

200 x 190 mm (LxH)

With solid wheels for on-the-road

Technical information: 220 x 220 mm (LxH)

180 x 180 x 160 mm (LxWxH)

500 x 300 x 260 mm (LxWxH)

Roady & tool Bags

[Bags & Cases] 07.03.11 10:32

Roady & tool Bags Bag agss & Ca Case sess se

Radio Chest Pack

For communication systems and other tools D6625

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying many brands communication systems and other tools

Technical information: Dimensions:

230 x 40 x 200 mm (LxWxH)

Tool Bag

40 LP Bag

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying all your electrical or mechanical tools

• Heavy duty Nylon material • Handy tool for on the road • 3 small pockets with zipper

D6626

Small

Technical information:

Dimensions:

360 x 260 mm (LxH)

Mobile Office Bag

• Heavy duty Nylon material • Handy tool for on the road • Retractable carrying handle • Solid Wheels • 3 small pockets with zipper

• Heavy duty Nylon material • Handy tool for on the road • Retractable carrying handle • Solid wheels • 4 pockets with zipper

With 3 pockets

D6680

Technical information:

Dimensions:

380 x 210 x 350 mm (LxWxH)

370 x 160 x 350 mm (LxWxH)

Roady & tool Bags 01_04_DAP_Bagscases_10_temp2011.indd 197

410 x 300 mm (LxH)

With retractable carrying handlee and wheels

Technical information: 350 x 200 x 330 mm (LxWxH)

D6660

Dimensions:

DJ Bag-1 D6661

Big

D6627

[Bags & Cases]

197 07.03.11 10:32

Protection Bags Bag agss & Ca Case sess se

Gear Bag 2

Suitable for Strobes, Moonflowers

Suitable for Foggers, Scanners

D6641

Gear Bags • Professional Transport bag • Lightweight Nylon • Heavy duty zipper to secure value items

Gear Bag 1 • Designed for on the road • 1 side pocket with zipper for accessories • Label space for product/ name label

D6642

Technical information:

Dimensions:

240 x 240 x 360 mm (LxWxH)

470 x 300 x 260 mm (LxWxH)

Gear Bag 3

Gear Bag 4

Gear Bag 5

Gear Bag 6

Suitable for Small Mushroom

Suitable for Club Scan

Suitable for Small Scanners

Suitable for Medium Size Scanners

D6643

D6644

D6645

D6646

Technical information:

Dimensions:

300 x 250 x 350 mm (LxWxH)

300 x 300 x 200 mm (LxWxH)

400 x 240 x 180 mm (LxWxH)

470 x 360 x 385 mm (LxWxH)

Gear Bag 10 Gear Bag 7

Gear Bag 8

Gear Bag 9

Suitable for T-Bar with 4 Par 56

Suitable for Starzone/EGO series

Suitable for Small Lighteffects

D6647

D6648

D6649

D6650

Suitable for Phantom and Clubspot • Solid wheels • Retractable handle easy rolling

Technical information:

Dimensions:

1400 x 240 x 340 mm (LxWxH)

198 01_04_DAP_Bagscases_10_temp2011.indd 198

460 x 400 x 200 mm (LxWxH)

Protection Bags

340 x 320 x 440 mm (LxWxH)

350 x 300 x 500 mm (LxWxH)

[Bags & Cases] 07.03.11 10:32

Protection Bags Bags & Cases

PB-MP2 PB-MP1 D6600

contents not included

For 16 Pole Multi Top Entry

• Heavy duty Nylon material • Handy tool for on the road

D6601

For 16 Pole Multi Side Entry

• Heavy duty Nylon material • Handy tool for on the road • Afterwards mountable

contents not included

Technical Information

Dimensions: 160 x 60 x 100 mm (LxWxH)

Technical Information

Dimensions: 150 x 60 x 100 mm (LxWxH)

PB-MP3 D6602

For 16 Pole Multi Side Entry

• Heavy duty Nylon material • Handy tool for on the road Technical Information

Dimensions: 160 x 60 x 100 mm (LxWxH)

PB-MP4 contents not included

D6603

For 24 Pole Multi Top Entry

contents not included

• Heavy duty Nylon material • Handy tool for on the road Technical Information

Dimensions: 180 x 60 x 100 mm (LxWxH)

PB-S1

D6605 For Socapexconnectors, Technical Information afterwards mountable

PB-T1

D6604 Protectionbag for Triaxconnectors, afterwards mountable

• Heavy duty Nylon material • Handy tool for on the road • Afterwards mountable

Dimensions: 130 x 130 x 160 mm (LxWxH)

Technical Information

Dimensions: 130 x 35 x 75 mm (LxWxH)

PB-1

D6606

For Splitters and Cable Snakes

• Heavy duty Nylon material • Handy tool for on the road

contents not included

Mini Accessory Bag D6640

Technical Information

Dimensions: 500 x 100 x 300 mm (LxWxH)

Dimensions: 150 x 180 x 50 mm (LxWxH)

Protection Bags

[Bags & Cases]

199

Standbags/19â&#x20AC;? Rackbags Bag agss & Ca Case sess se

Stand-bag for microphone stands D7923

For 6 Stands

Get those stands organised with this straightforward solution from DAP. The stand-bag provides an affordable way of carrying your hardware. Technical information: Dimensions:

1100 x 230 x 150 mm (LxWxH)

19 inch Rack Bags The DAP Rack-Bags feature tough fabric and comfortable carrying straps. Heavyduty zippers and scratch resistant fabric finish these fine bags! Available models:

D7901

D7902

D7903

D7904

Technical information:

D7901 : Dimensions:

520 x 2U x 430 mm (LxWxH)

D7902 : Dimensions:

520 x 3U x 430 mm (LxWxH)

D7903 : Dimensions:

520 x 4U x 430 mm (LxWxH)

D7904 : Dimensions:

520 x 6U x 430 mm (LxWxH)

200 01_04_DAP_Bagscases_10_temp2011.indd 200

Standbags/19â&#x20AC;? Rackbags

[Bags & Cases] 07.03.11 10:33

ABS Cases Bag agss & Ca Case sess se

ABS Cases Without compromises but easy to handle are the main specifications of these 19 inch rack cases from DAP audio. Be smart and protect your precious equipment. The DAP-cases are a professional and affordable choice: with a small investment they protect your costly “on-theroad” gear! Main features: • lightweight • professional materials • stackable • “All-weather” proof • available as 2, 4, 6, 8, 10 and 12U • Butterfly lock

Wheelboard for ABS Cases D7109

ABS Case 19 inch D7101

Technical information:

ABS Case 19 inch D7103

Measurements:

Material: MDF

Technical information:

ABS C Case 19 iinch h D7102

Technical information:

ABS Case 19 inch D7104

Technical information:

ABS Cases 01_04_DAP_Bagscases_10_temp2011.indd 201

ABS Case 19 inch D7105

10U

Technical information:

[Bags & Cases]

ABS Case 19 inch D7106

12U

Technical information:

201 07.03.11 10:33

ABS Cases Bag agss & Ca Case sess se ABS Mixer Case D7130

12U Technical information:

ABS Microphonecase Technical information:

Available models:

D7150

For 6 microphones ones

D7151

For 9 microphones ones

ABS Mobile DJ case D7110

6U top, 2U front, 4U back Technical information:

ABS Mobile DJ case D7111

7U top, 2U front, 6U back Technical information:

ABS Mobile DJ case D7112

6U top, 4U front, 6U back Technical information:

202 01_04_DAP_Bagscases_10_temp2011.indd 202

ABS Cases

[Bags & Cases] 07.03.11 10:33

ABS Cases Bag agss & Ca Case sess se ABS Mobile DJ case D7113

10U top, 8U front, 10U back Technical information:

ABS Mobile DJ case D7114

10U top, 6U front, 8U back Technical information:

ABS Mobile DJ case D7115

10U top, 4U front, 6U back Technical information:

ABS Mobile DJ case D7116

10U top, 2U front, 4U back Technical information:

ABS LP Case D7125

ABS Turntable Case

For 40 LPâ&#x20AC;&#x2122;s

D7126 Technical information:

ABS Cases 01_04_DAP_Bagscases_10_temp2011.indd 203

Technical information:

[Bags & Cases]

203 07.03.11 10:33

ABS Cases Bag agss & Ca Case sess se ABS DJ Bar case Technical information:

Available models:

D7120

For 2 turntables and 10” mixer

D7121

For 2 turntables and 19” mixer

ABS Microphone Stand Case D7135

Case for 10 microphone stands Technical information:

ABS Keyboard Case D7140

Small model Technical information:

ABS Keyboard Case D7141

Large model Technical information:

ABS Toolcase

ABS Universal Foam Case

Measurements:

D7142

• Heavy duty ABS Case • Handy tool for on the road • 2 pockets for gear and tools • 2 compartments for gear and tools

204 01_04_DAP_Bagscases_10_temp2011.indd 204

Measurements:

D7143

• Heavy duty ABS Case • Create your own toolcase with the modular foam system • Handy tool for on the road

ABS Cases

[Bags & Cases] 07.03.11 10:33

Pro DJ/Road Cases Bag agss & Ca Case sess se Microphone Case for 7 mic’s Technical information:

Available models:

D7304B

Black

D7304U

Blue

D7304R

Red

D7304S

Silver-rib

Flightcase for 6 Microphones

Flightcase for 12 Microphones

D7393B

D7394B Technical information:

Technical information:

Flightcase for 25 Microphones

Case for Wireless Microphone ER-193

D7358B

D7430B Technical information:

Technical information:

Case for Wireless Microphone ER-216

Microphone Stand Case

D7431B

D7490B

For 20 microphone stands

Technical information:

Wireless Microphone Case 2 D7520B

4U 19” strip with drawer

Measurements:

Technical information:

NEW PRODUCT

Wireless Microphone Case 1 D7519B

Pro DJ/Road Cases 01_04_DAP_Bagscases_10_temp2011.indd 205

8U 19” strip, two drawers

[Bags & Cases]

Measurements:

NEW PRODUCT

205 07.03.11 10:34

Roadcases Bag agss & Ca Case sess se Roady-Pro Case D7329B Technical information:

Universal Foam Case 2

Universal Foam Case 1

D7492B

D7491B

Technical information:

Case for one Starzone Effect D7578 Technical information:

Case for two Starzone Effects D7579 Technical information:

206 01_04_DAP_Bagscases_10_temp2011.indd 206

Roadcases

[Bags & Cases] 07.03.11 10:34

Roadcases Bag agss & Ca Case sess se Flightcase for Scanmaster series D7403

2U Technical information:

Flightcase for Showmaster 24 D7401

6U Technical information:

Flightcase for Showmaster 48 D7402

6U Technical information:

Case for colourgels and frames Technical information:

Available models:

D7355B

For 15 pieces

D7356B

For 10 pieces

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 207

[Bags & Cases]

207 07.03.11 10:34

Roadcases Bag agss & Ca Case sess se Conical Adapter Case D7363B

For 48 Adapters Technical information:

Pin insert for Spigotcase D7364B

Case for T4-bar with 4 Par 56 short D7351B Technical information:

Multiflex Case D7460B

Including 2 high dividers Technical information:

Top Insert for Multiflex Case

Multiflex Case divider

D7463

D7461

High

Multiflex Case divider D7462

Low

Technical information:

208 01_04_DAP_Bagscases_10_temp2011.indd 208

Roadcases

[Bags & Cases] 07.03.11 10:34

Roadcases Bag agss & Ca Case sess se Case for 60 CD’s D7325B Technical information:

Flightcase for 170 CD’s D7327B Technical information:

Case for CD-Player 3U Technical information:

Available models:

D7317B

Black

D7317U

Blue

D7317R

Red

Case for DAP CDJ-250 D7590B Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 209

[Bags & Cases]

209 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se Case for Darkshade Range Toploader D7583 Technical information:

Turntable-Pro Case D7328B Technical information:

Mixer-Pro Case D7379B Technical information:

210 01_04_DAP_Bagscases_10_temp2011.indd 210

Roadcases

[Bags & Cases] 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se Mixer Case D7576

19” with shelf, 11,50 kg Technical information:

Mixer Case D7575

10”, 7 kg Technical information:

Mixer Case D7574

12”, 8,50 kg Technical information:

Mixer Case D7573

19”, 7,64 kg Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 211

[Bags & Cases]

211 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se Case for Pioneer DJM mixer D7567

NEW PRODUCT

! Technical information:

Case for Pioneer CDJ series D7569

models: CDJ-800/850/900/1000/2000

NEW PRODUCT

! Technical information:

Mobile DJ-Bar D7331B Technical information:

Combicase Pioneer 1 x DJM & 2 x CDJ D7568

Mixer models: DJM-600/700/800, CD models: CDJ-800/850/900/1000/2000

NEW PRODUCT

! Technical information:

212 01_04_DAP_Bagscases_10_temp2011.indd 212

Roadcases

[Bags & Cases] 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se

NEW PRODUCT

Case for Pioneer DJM350 & 2x CDJ350 D7566

! Technical information:

Flightcase for 2 CD Players and 19â&#x20AC;? Mixer D7584 Technical information:

Compact Mobile DJ Case D7381B Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 213

[Bags & Cases]

213 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se Mobile DJ Case D7582 Technical information:

Compact Audio Rental Case D7382B Technical information:

Emergency Case D7518

NEW PRODUCT

! Technical information:

214 01_04_DAP_Bagscases_10_temp2011.indd 214

Roadcases

[Bags & Cases] 07.03.11 10:35

Roadcases Bag agss & Ca Case sess se Tool Case D7589B Technical information:

Technical information:

Height of the drawers: 1 & 4: 65mm 2 & 3: 100mm Width: 420mm Height: 500mm

Roadie Case 12U D7383B Technical information:

Drawner Case Pro D7517 Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 215

[Bags & Cases]

215 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Drawner Case 16U D7384B Technical information:

Drawner Case 20U D7385B Technical information:

Case for 1 x Phantom HTI/Shogun Laserhead D7482B

For 40166, 30970, 30971, 30972 Technical information:

216 01_04_DAP_Bagscases_10_temp2011.indd 216

Roadcases

[Bags & Cases] 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Flightcase for 2x Giant D7515 Technical information:

Flightcase for 2 pieces Indigo 150 D7495B

NEW PRODUCT

! Technical information:

Flightcase for 2 pieces Indigo 4500 / Indigo Beam NEW D7496B

PRODUCT

! Technical information:

Flightcase for Indigo 4500 D7494B Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 217

[Bags & Cases]

217 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Case for 2 pcs Orbit 2 D7585 Technical information:

Case for 2 pcs Explorer 250 D7390B Technical information:

Case for Explorer 250 D7395B Technical information:

Case for Explorer 575 D7396B Technical information:

218 01_04_DAP_Bagscases_10_temp2011.indd 218

Roadcases

[Bags & Cases] 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Flightcase for Phantom Series 250 D7493B Technical information:

Flightcase for 2 pieces Phantom Beam / Spot D7497B

NEW PRODUCT

! Technical information:

Flightcase for Phantom 575 D7514 Technical information:

Case for Matrix D7592

NEW PRODUCT

! Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 219

[Bags & Cases]

219 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Case for Followspot D7480B Technical information:

Case for Octostrip Set or 8 LED Tubes D7486B Technical information:

Flightcase for Visionstick D7516

for 10 pieces Visionstick Technical information:

Case for Star Sky Pro D7388B Technical information:

220 01_04_DAP_Bagscases_10_temp2011.indd 220

Roadcases

[Bags & Cases] 07.03.11 10:36

Roadcases Bag agss & Ca Case sess se Flightcase for 4 pieces Spectral CYC2000 D7499B

NEW PRODUCT

! Technical information:

Flightcase for 8 pieces Spectral Series D7498B

NEW PRODUCT

! Technical information:

Flightcase for 8x Sunstrip Active D7510 Technical information:

Flightcase for 8x Par 64 D7511

NEW PRODUCT

! Technical information:

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 221

[Bags & Cases]

221 07.03.11 10:37

Roadcases Bag agss & Ca Case sess se Flightcase for 10x Cable Bridge 5 D7512 Technical information:

Flightcase for 20x Cable Bridge 2 D7513 Technical information:

Lodestar Flightcase for 1 chainhoist D7472B

500 or 1000 kg Technical information:

Lodestar Flightcase for 2 chainhoists D7471B

500 or 1000 kg Technical information:

222 01_04_DAP_Bagscases_10_temp2011.indd 222

Roadcases

[Bags & Cases] 07.03.11 10:37

Roadcases Bag agss & Ca Case sess se Rigging Flightcase with insert D7470B Technical information:

Case for Citypainter/Citycolour D7481B Technical information:

Stagewheel Flightcase D7362B Technical information:

Insert for 500 kg Chainhoist D7473B Technical information: Weight: Dimensions:

9,2 kg 405 x 310 x 340 mm (LxWxH)

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 223

[Bags & Cases]

223 07.03.11 10:37

Roadcases Bag agss & Ca Case sess se Case for two K-112/K-115 D7580 Technical information:

Roady Guitar Combo Case D7521

Size 1 Technical information:

Roady Guitar Combo Case D7522

Size 2 Technical information:

Roady Guitar Combo Case D7523

Size 3 Technical information:

224 01_04_DAP_Bagscases_10_temp2011.indd 224

Roadcases

[Bags & Cases] 07.03.11 10:37

Roadcases Bag agss & Ca Case sess se Roady Keyboard Case D7501

Size 1 Technical information:

Roady Keyboard Case D7502

Size 2 Technical information:

Roady Keyboard Case D7503

Size 3 Technical information:

Case for Pioneer DJM350 & 2x CDJ350

Roadcases 01_04_DAP_Bagscases_10_temp2011.indd 225

D7566

[Bags & Cases]

225 07.03.11 10:37

Roadcases Bag agss & Ca Case sess se Mirrorball flightcase D7440B

Case for 30 cm mirrorball Technical information:

Mirrorball flightcase D7441B

Mirrorball flightcase

Case for 40 cm mirrorball

D7442B

Case for 50 cm mirrorball

Technical information:

Mirrorball flightcase D7443B

Case for 100 cm mirrorball Technical information:

226 01_04_DAP_Bagscases_10_temp2011.indd 226

Roadcases

[Bags & Cases] 07.03.11 10:38

Rackcases Bag agss & Ca Case sess se Computercase

ShockProof Case

D7577

D7530B

12U

Technical information:

Rack Module Case D7417B

Technical information:

Rack Module Case

For 1 x 6U or 1 x 4U + 1 x 2U rack modules

D7418B

For 1 x 8U or 2 x 4U rack modules

Technical information:

Rack Module Case D7419B

Technical information:

19â&#x20AC;? Rack module

For 3 x 4U or 1 x 4U + 1 x 8U rack modules Technical information:

Rackcases 01_04_DAP_Bagscases_10_temp2011.indd 227

Available models:

[Bags & Cases]

D7410

D7411

D7412

D7413

D7414

D7415

10U

D7416

3U front and 10U top

227 07.03.11 10:38

Rackcases Bag agss & Ca Case sess se Effectrack Case D7540

16U

Technical information:

Effectrack Case D7541

Effectrack Case

20U

D7581

Technical information:

Compact 19â&#x20AC;? Effectcase 4U

Technical information:

NEW PRODUCT

D7532B

22U

The depth of this case is less than a normal amp case, this makes it very handy to mount and wire all your effect signal processing gear.

Compact Effectcase 8U

01_04_DAP_Bagscases_10_temp2011.indd 228

Rackcases

The depth of this case is less than a normal amp case, this makes it very handy to mount and wire all your effect signal processing gear.

Technical information:

228

NEW PRODUCT

D7533B

Technical information:

[Bags & Cases] 07.03.11 10:38

Rackcases Bag agss & Ca Case sess se

Rackcases Without compromises but easy to handle are the main specifications of these 19 inch rack cases from DAP audio. Be smart and protect your precious equipment. The DAP-cases are a professional and affordable choice: with a small investment they protect your costly “on-theroad” gear! Main features: • lightweight • professional materials • stackable • “All-weather” proof • available as 2, 4, 6, 8, 10 and 12U • Butterfly lock

• stackable • available as 2, 4, 6, 8, 10 and 12U • lightweight • Butterfly lock

19 inch Rackcase D7371B

Measurements:

19 inch Rackcase D7375B

10U

Measurements:

19 inch Rackcase D7372B

Measurements:

D7373B

Measurements:

19 inch Rackcase D7376B

19 inch Rackcase

12U

Measurements:

19 inch Rackcase D7377B

16U

19 inch Rackcase D7374B

Measurements:

Wheelbase D7370B

For 19” Flightcases

Measurements:

Technical Information Max. Load: 60 kg Wheels (height): 150 mm Dimensions: 500 x 520 x 170 mm (LxWxH) Weight: 9,02 kg

Rackcases 01_04_DAP_Bagscases_10_temp2011.indd 229

[Bags & Cases]

229 07.03.11 10:38

Rackcases Bag agss & Ca Case sess se

Rackcase with Topmounting D7378B

4U Technical information:

Rackcase with Topmounting D7369B

6U Technical information:

Rackcase with Topmounting D7368B

8U Technical information:

230 01_04_DAP_Bagscases_10_temp2011.indd 230

Rackcases

[Bags & Cases] 07.03.11 10:38

Rackcases Bag agss & Ca Case sess se Rackcase with Topmounting D7367B

10U Technical information:

Rackcase with Topmounting D7366B

12U Technical information:

Rackcase with Topmounting D7365B

16U Technical information:

Dimmer-rackcase D7542

16U Technical information:

Rackcases 01_04_DAP_Bagscases_10_temp2011.indd 231

[Bags & Cases]

231 07.03.11 10:39

Stackcases Bag agss & Ca Case sess se

Stack cases The DAP Stackcase series is a range of versatile cases built for on-the-road use and efficient mobility. Due to its special dimensions any combination of stackcases has the same size as an EU-pallet. Therefore it fits ideal in any truck without loosing space. All cases are black and the inside is finished with carpet in order to protect your equipment.

Same size as an EU-pallet!

Stack Case 1

Stack Case 2

D7420B

D7421B Technical information:

Stack Case 3

Technical information:

Stack Case 4

D7422B

D7423B Technical information:

Stack Case 5

Technical information:

Wheelset for Stackcase

D7424B

D7429B

For Stack Cases

Technical information:

2x = Set Dimensions: Weight:

232 01_04_DAP_Bagscases_10_temp2011.indd 232

Stackcases

360 x 150 x 126 mm (LxWxH) 4,5 kg

[Bags & Cases] 07.03.11 10:39

Stackcases Bag agss & Ca Case sess se Compact Transport Trolley D7428B

NEW PRODUCT

Compact and lightweight transport trolley. It has 100mm wheels and can be folded into a very small package (670 x 336 x 100mm). Although it has a slim design it still till can handle big and heavy goods with a maximum of 50Kg.

Special features: â&#x20AC;˘ Wheels automaticly swing out and fold up for easy storage â&#x20AC;˘ Lightweight but strong and portable p

Measurements:

Technical Information Extend size: 1017 x 336 x 452mm (HxWxD) Fold size: 670 x 336 x 100mm (HxWxD) Base size: 315 x 297mm Wheel diameter: 100mm Bungee cord: 1060mm Maximum load: 50Kg Weight: 2,75 Kg

Stackcases 01_04_DAP_Bagscases_10_temp2011.indd 233

[Bags & Cases]

233 07.03.11 10:39

XLR - XLR Adapters Aud udio io Ada dapt pter pt erss er XLR - XLR Adapters FLA21 - XLR F. 3p. > XLR F. 3p. FLA21

FLA24 - XLR F. 3p. > Jack stereo M. FLA24

XLR - Jack Adapters FLA25 - XLR M. 3p. > XLR M. 3p. FLA25

FLA26 - XLR M. 3p. > Jack stereo F. FLA26

FLA22 - XLR F. 3p. > Jack stereo F. FLA22

FLA27 - XLR M. 3p. > Jack mono M. FLA27

FLA23 - XLR F. 3p. > Jack mono M. FLA23

FLA28 - XLR M. 3p. > Jack stereo M. FLA28

XLR - RCA Adapters FLA31 - XLR F. 3p. > RCA M. FLA31

FLA32 - XLR M. 3p. > RCA M. FLA32

FLA33 - XLR F. 3p. > RCA F. FLA33

FLA34 - XLR M. 3p. > RCA F. FLA34

3p. - 5p. DMX Adapters FLA29 - 5p. - 3p. DMX Adapter

FLA30 - 3p. - 5p. DMX Adapter

FLA29 5p. XLR male > 3p. XLR female DMX adapter

FLA30 3p. XLR male >5p. XLR female DMX Adapter

234

XLR - XLR Adapters

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 234

[Audio Adapters] 07.03.11 11:56

Miscellaneous Adapters Aud udio io Ada dapt pter pt erss er Miscellaneous Adapters FLA35 - Jack stereo F. > Jack stereo F. FLA35

FLA13 - Jack mono M. > RCA F. FLA13

FLA15 - RCA F. > RCA F. FLA15

FLA60 - CAT-5 Adapter FLA60

Ethernet CAT5 Adapter

Chassis Adapters FLA50 - XLR F. 3p. chassis > XLR M. 3p. FLA50

FLA51 - XLR M. 3p. chassis > XLR F. 3p. FLA51

FLA52 - Jack chassis F. > Jack F. FLA52

FLA53 - Speaker chassis M. > Speaker M. 4p. FLA53

Transformer adapters FLA05 - Jack F. (50 kilo-Ohm) > XLR F. (600 Ohm) FLA05

With impedance-matching

FLA06

FLA07 - XLR F. (600 Ohm) > Jack M. (50 kilo-Ohm) FLA07

FLA06 - Jack F. (50 kilo-Ohm) > XLR M. (600 Ohm)

With impedance-matching

FLA08 - XLR M. (600 Ohm) > Jack M. (50 kilo-Ohm) FLA08

Miscellaneous Adapters 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 235

With impedance-matching

[Audio Adapters]

235 07.03.11 11:57

Transformer adapters Aud udio io Ada dapt pter pt erss er Transformer adapters XLR Female to XLR Male (insulated) FLA09 XLR Female input (with 20 cm cable). XLR Male Bypass out (with 20 cm cable) and XLR Male Iso Transformer out. (Pin 1 Open)

FLA01 - Jack M. (50 kilo-Ohm) > XLR F. (600 Ohm) FLA01 With impedance-matching and on/off switch

FLA02 - Jack M. (50 kilo-Ohm) > XLR M. (600 Ohm) FLA02 With impedance-matching and on/off switch

FLA03 - Jack F. (50 kilo-Ohm) > XLR F. (600 Ohm)

FLA04 - Jack F. (50 kilo-Ohm) > XLR M. (600 Ohm)

FLA03 With impedance-matching and on/off switch

FLA04 With impedance-matching and on/off switch

Speakeradapters FSA03 - Jack F. locking > Speaker M. 2p. FSA03

FSA07 - XLR F. > Speaker M. 2p. FSA07

236

FSA04 - Jack F. locking > Speaker F. 2p. FSA04

FSA05 - XLR F. > Speaker F. 2p. FSA05

FSA08 - XLR M. > Speaker M. 2p. FSA08

FSA06 - XLR M. > Speaker F. 2p. FSA06

Transformer adapters

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 236

FSA01 - Speaker F. 2p. > Speaker F. 2p. FSA01

FSA02 - Speaker F. 4p. > Speaker F. 4p. FSA02

[Audio Adapters] 07.03.11 11:57

Xcaliber XLR - XLR Adapters Aud udio io Ada dapt pter pt erss er Welcome to the Xcaliber Gold Line. A chain is no stronger than its weakest link The weakest point decides the strength of a chain. In a chain of audio-components the cable and/or connector is often the weakest link. Not anymore! With the new developed Xcaliber range, DAP Audio brings a complete range of adapters to the market which are designed to the highest specifications and which can meet the standard of the most demanding audio-technician. The Xcaliber series brings you both excellent audio, as well mechanical specifications and is therefore the ultimate solution for high fidelity sound or for use in stressful circumstances such as rentals. Why safe money on the most important and most fragile part of your audiochain! Choose for durability, performance and proven quality. DAP Audio Xcaliber Gold Line. DAP cares about the environment. We live on a beautiful but fragile planet and we think it is our duty to protect the environment. Therefore we are proud to announce that all Xcaliber products are 100% halogen free and 100% RoHS compliant. Another good reason for choosing for DAP Audio Xcaliber Gold Line.

Xcaliber Audio Adapters

You donâ&#x20AC;&#x2122;t want to busy yourself with details? Things of minor importance like adapters? DAP-Audio developed a new series of high quality Audio adapters so that you donâ&#x20AC;&#x2122;t have to pay attention on this for the next couple of years. These professional Audio adapters are made for stage, studio environment and other situations were an excellent sound reproduction is necessary. The Xcaliber adapters are extremely careful manufactured, they are made of gold plated connectors and a sturdy black chrome-finish. Therefore, DAP Audio provides a lifetime warranty for these Xcaliber products.

Xcaliber XLR - XLR Adapters 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 237

[Audio Adapters]

237 07.03.11 11:57

Xcaliber XLR - XLR Adapters Aud udio io Ada dapt pter pt erss er Xcaliber XLR - XLR Adapters XGA21 - XLR/F 3p. > XLR/F 3p. XGA21

XGA25 - XLR/M 3p. > XLR/M 3p. XGA25

XGA29 - XLR/M 5p. > XLR/F 3p. XGA29

XGA30 - XLR/F 5p. > XLR/M 3p. XGA30

XGA36 - XLR/M 3p. > XLR/F 3p. Phase Reverse XGA36

XGA37 - XLR/M 3p. > XLR/F 3p. Phase Reverse Switch XGA37

Xcaliber XLR - Jack Adapters XGA22 - XLR/F 3p. > Jack/F Balanced XGA22

XGA23

XGA24 - XLR/F 3p. > Jack/M stereo XGA24

XGA27 - XLR/M 3p. > Jack/M mono XGA27

XGA28 - XLR/M 3p. > Jack/M stereo XGA28

238

XGA23 - XLR/F 3p. > Jack/M mono

XGA35 - XLR/M 3p. > Jack/F Balanced XGA35

Xcaliber XLR - XLR Adapters

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 238

[Audio Adapters] 07.03.11 11:58

Xcaliber XLR - RCA Adapters Aud udio io Ada dapt pter pt erss er Xcaliber XLR - RCA Adapters XGA31 - XLR/F 3p. > RCA/M

XGA33 - XLR/F 3p. > RCA/F

XGA31

XGA33

XGA32 - XLR/M 3p. > RCA/M

XGA34 - XLR/M 3p. > RCA/F

XGA32

XGA34

Xcaliber Miscellaneous Adapters XGA01 - RCA/F > RCA/F

XGA02 - Mini Jack/F > Mini Jack/F

XGA01

XGA02

XGA03 - Jack/F > Jack/F

XGA04 - RCA/M > Mini Jack/F

XGA03

XGA04

XGA05 - RCA/M > Jack/F

XGA06 - RCA/F > Jack/M mono

XGA05

XGA06

XGA07 - Mini Jack/M mono > Mini Jack/F XGA07

XGA08 - Mini Jack/M stereo > Mini Jack/F, 90째 XGA08

XGA09 - Jack/M mono > Jack/F XGA09

XGA10 - Jack/M mono > Mini Jack/F, 90째 Incl. 2 x 10 kilo-Ohm resistors XGA10

Xcaliber XLR - RCA Adapters 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 239

[Audio Adapters]

239 07.03.11 11:58

Xcaliber Miscellaneous Adapters Aud udio io Ada dapt pter pt erss er Xcaliber Miscellaneous Adapters XGA11 - Jack/M mono > Mini Jack/F Incl. 2 x 10 kilo-Ohm resistors XGA11

XGA12

XGA13 - Jack/M stereo > Mini Jack/F XGA13

XGA14 - Mini Jack/M mono > 2 x Mini Jack/F XGA14

XGA15 - Mini Jack/M stereo > 2 x Mini Jack/F XGA15

XGA16 - Mini Jack/M stereo > 2 x Mini Jack/F XGA16

XGA17 - Mini Jack/M stereo > 2 x RCA/F XGA17

XGA18 - Jack/M stereo > 2 x RCA/F XGA18

XGA19 - Jack/M mono > 2 x RCA/F XGA19

XGA20 - Jack/M stereo > 2 x Jack/F XGA20

XGA38 - 2 x RCA/F > RCA/M Incl. 2 x 10 kilo-Ohm resistors XGA38

XGA39 - Mini Jack/F > Jack/M stereo XGA39

XGA40 - Mini Jack/M > 2 x Mini Jack/F Incl. 2 x 10 kilo-Ohm resistors XGA40

240

XGA12 - Jack/M stereo > Mini Jack/F Incl. 2 x 10 kilo-Ohm resistors

XGA41 - Jack/M mono > 2 x RCA/F Incl. 2 x 10 kilo-Ohm resistors XGA41

Xcaliber Miscellaneous Adapters

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 240

[Audio Adapters] 07.03.11 11:58

Xcaliber Miscellaneous Adapters Aud udio io Ada dapt pter pt erss er Xcaliber Miscellaneous Adapters XGA42 - 2 x RCA/F > RCA/M

XGA43 - Mini Jack/M mono > Mini Jack/F Incl. 2 x 10 kilo-Ohm resistors

XGA42

XGA43

XGA44 - Mini Jack/M stereo > 2 x Mini Jack/F

Incl. 4x 10 kOhm resistors

XGA44

XGA45

Neutrik Adapters

Neutrik Connectors/Chassis

FSA09 - Speakon F. 8p. > Speakon F. 8p. FSA09

XGA45 - Jack mono/m > jack mono/m

Neutrik

SMK102BU

Blue endcap

Speakon connector SPX 4P SMK304BU

2p. speakon plug

Male, Black housing,

Speakon connector SPX 4P 90째

Male, Black/Blue housing

SMK404BU

XLR 3p. connector

Male, Black/Blue housing

4p. speakon plug SMK104BU

Blue endcap

8p. speakon plug

Male, Black housing,

4p. speakon chassis SFC104BU

SMK108BU

Blue endcap

Male, Black housing,

8p. speakon chassis

Female, Black housing

SFC108B

Female, Nickel housing

Jackplug 6,3 mm Mono Silent

XMK303NB

JMK105NB

Only for instrument use

Male, Nickel housing

XFK303NB

Female, Nickel housing

Xcaliber Miscellaneous Adapters 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 241

[Audio Adapters]

241 07.03.11 11:59

Neutrik Connectors/Chassis Aud udio io Con onne nect ne ctor ct orss or Neutrik Connectors/Chassis Jack-plug mono NP-2-C JMK302NB

NC3-FRX XFK303HNB

Mono, Nickel housing

XLR Plug 3P/F 90째

JMK303NB

XFK303HNBB

Stereo, Nickel housing

XLR Plug 3P/F 90째 Black

Neutrik Connectors/Chassis NC3-MRX

USB D-Chassis

XMK303HNB

UFC303N

XLR Plug 3P/M 90째

UFC303B

Nickel housing Black housing

USB adapters are ideal for audio networking and integration of digital equipments into audio systems. USB gender changer type A-B (B-A). Built into the universally accepted standard D-shape housing. Reversible USB gender changer (type USB A and USB B) required to integrate computer-based equipment into sound and video systems, but also for audio networking like M-LAN, Cobra Net etc.

XMK303HNBB

XLR Plug 3P/M 90째 Black

XLR 3p. chassis, Black housing XMC303NB

XLR 3p. chassis, Nickel housing XMC303N

Male

XFC303NB

XFC303N

Female

NE8FDPD Ethercon D-size

NA1394-6 Firewire chassis

EFC305N

Feedthrough receptacle in D-sized metal flange with the secure latching system. Nickel EFC305B

Feedthrough receptacle in D-sized black chrome metal flange with the secure latching system. Black

NE8MC Ethercon RJ45 carrier Nickel EFK305NB EFK305BB

FFC303N

Firewire 6 with IEEE 1394 6-pole connectors, Nickel housing

FFC303B

Firewire 6 with IEEE 1394 6-pole connectors, Black housing

A new addition to our vast range of connectors, plugs and flightcase-accessories. The new Neutrik Firewire chassis for Firewire 6 with IEEE1394 6-pol connectors makes sure that your case is equipped for the future and can handle any new development which comes along. No welding needed, you can use standard Firewire cables on both sides of the chassis. Connect to the future!

FSA10 - Speakon M. > 6,3 mm Jack 2P FSA10

Nickel Black

Neutrik

RJ45 cable carrier consisting of shell, fixing disk, chuck, bush and boot. Packed with two cable protection elements for cable diameter either up to 5 mm or 8 mm. For pre-assembled RJ45 plugs. Standard bushing colour is black, EFK305BB. 9 different colours available only on request.

242

Neutrik Connectors/Chassis

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 242

[Audio Connectors] 07.03.11 11:59

Jack Connectors/Chassis Aud udio io Con onne nect ne ctor ct orss or

Jack Connectors/Chassis 6.3 mm. Jackplug mono, Nickel housing COLOUR

JMK102NB JMK102NU JMK102NR JMK102NG JMK102NY

COLOUR

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

JMK102BB JMK102BU JMK102BR JMK102BG JMK102BY

6.3 mm. Jackplug stereo, Nickel housing COLOUR

JMK103NB JMK103NU JMK103NR JMK103NG JMK103NY

JMK103BB JMK103BU JMK103BR JMK103BG JMK103BY

Jackplug with spring stereo, Nickel housing JMK203N

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

Jack-F locking plug, Nickel housing JFK102NB

Jack Connectors/Chassis 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 243

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

6.3 mm. Jackplug stereo, Black housing COLOUR

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

Jackplug with spring mono, Nickel housing JMK202N

6.3 mm. Jackplug mono, Black housing

Black endcap

Jack-F locking chassis, Nickel housing JFC102N

[Audio Connectors]

243 07.03.11 11:59

XLR Connectors/Chassis Aud udio io Con onne nect ne ctor ct orss or XLR Connectors/Chassis XLR 3p. Connector male, Nickel housing COLOUR

XMK203NB XMK203NU XMK203NR XMK203NG XMK203NY

COLOUR

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

XFK203NB XFK203NU XFK203NR XFK203NG XFK203NY

XLR 3p. Connector male, Black housing COLOUR

XMK203BB XMK203BU XMK203BR XMK203BG XMK203BY

XLR 3p. Connector female, Nickel housing

XLR 3p. Connector female, Black housing COLOUR

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

XFK203BB XFK203BU XFK203BR XFK203BG XFK203BY

XLR 3p. chassis, Nickel housing XMC103N

Black Blue Red Green Yellow

N-CON Mini XLR 4p. Plug Nickel housing XMK204NB

Male

XFC103N

XFK204NB

Female

XLR 3p. chassis, Black housing

XLR 5p. Connector male, Nickel housing

XMC103B

XMK105NB

Male

Black endcap

XFC103B

XFK105NB

Female

Female, Black endcap

XLR 5p. chassis, Nickel housing XMC105N

Male XFC105N

Female

244

XLR Connectors/Chassis

01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 244

[Audio Connectors] 07.03.11 11:59

Speakerconnectors/Chassis Aud udio io Con onne nect ne ctor ct orss or Speakerconnectors/Chassis Speaker Chassis 4p. Black housing SFC204B

Speakerconnector 4p. Black housing SMK204BU

Female

Male, blue endcap SFK204BU

Female, blue endcap

Pomona plug

Professional Pomona Plug

PMK102B

PMK103 Pomona Plug Screw connection. Double screw connection Locking function Fits 8mm cable Metal Plug Gold plated contacts

Black endcap PMK102R

Red endcap

RCA/Cinch Connectors RCA connector male, Black Housing

RCA Connector female

COLOUR

RFK102B

RMK102B

Black ring

RMK102U RMK102R RMK102G RMK102Y

RFK102R

Red ring

BNC Plug 75 Ohm for 6 mm cable

Black endcap Blue endcap Red endcap Green endcap Yellow endcap

RCA Male to RCA Female 90째 adapter

RCA male to 6,3mm Jack Female

FLA16

BMK101 BNC Plug Soldering type Fits 6mm cable Metal plug Gold plated contacts

FLA17

RCA 90 degree adaptor Gold Plated contacts Compact size

NEW PRODUCT RCA Chassis D-Size

BNC Female Chassis 75 Ohm D-size

RFC101 RCA Female Connector Double Female - No soldering needed Fits D-size chassis Impedance: 75 Ohm Black housing

BFC101 BNC Connector Soldering type Fits D-size chassis Impedance: 75 Ohm Black housing

Speakerconnectors/Chassis 01_05_06_DAP_AudioAdapt+Connectors_10_temp2011.indd 245

[Audio Connectors]

245 07.03.11 12:00

DAP Tools & Testers Pre refa fabb Ca fa Cabl bles bl es Digital Sound Level Meter

Cable Tester

LCD digital display • Analog bar indicator • Wide dynamic range • Auto/manual range • Fast/Slow response selectable • Max. value Hold function • A/C weighting selection • Date and time display • AC/DC auxiliary output • Backlight • Low power indication

This is an on-the-road tool you certainly can’t’t miss in your gearbox! A nifty, handy Cable Tester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED’s. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuitit check with a red LED and audio-warningsignal is also included. On the left and right side you’ll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® ® Speakon®.

D1907

91004

Technical information: Measurement range: Accuracy: Resolution: Sample rate: Frequency range: Over range indication: Voltage:

30 dB - 130 dB +/-2 dB 0,1 dB 2 times/s 20 Hz - 8 kHz UNDER or OVER 1,5V (6 x AAA) Incl. batt.

Cable Tester Pro D1909

The Cable Tester pro is your ideal tool for checking all your audio cables. It is easy in use and rugged for use on the road. Technical information: General specification: • Test function for: Speakerplug 4 pole Speakerplug 8 pole RJ-45 3,5 Mini-Jack 6,3 Jack XLR 5 pole XLR 3 pole RCA 5 pole Din • Battery operated Dimensions: 187 x 37 x 90mm

246 01_07_DAP_PrefabCables_10_temp2011.indd 246

DAP Tools & Testers

[Prefab Cables] 07.03.11 12:06

Prefab Speakercables Pre refa fabb Ca fa Cabl bles bl es Prefab Speakercables FS01 - Jack mono > Jack mono, 2 x 1,5mm2

FS02 - Jack mono > XLR/F 3 p., 2 x 1,5mm2

Length

FS01150 1,5 m

FS026

3m 6m 10 m 15 m

FS0210

FS013 FS016 FS0110 FS0115

FS03 - XLR/F 3 p. > XLR/M 3 p., 2 x 1,5mm2

6m 10 m

FS17 - Speakon > Speakon, 2 x 1,5mm2

Length

3m FS036 6 m FS0310 10 m FS033

FS173 FS176 FS1710 FS1715 FS1720

3m 6m 10 m 15 m 20 m

FS22 - Speaker Extension Cable, 2x 2,5mm2 Length

3m 6m FS2210 10m FS2215 15m FS223

FS226

Prefab Speakercables 01_07_DAP_PrefabCables_10_temp2011.indd 247

[Prefab Cables]

247 07.03.11 12:06

Prefab Speakercables Pre refa fabb Ca fa Cabl bles bl es Prefab Speakercables FS04 - Speakon > Speakon, 2 x 2,5mm2

FS14 - Speakon > Speakon, 4 x 2,5mm2

Length

3 m (Neutrik) FS046 6 m (Neutrik) FS0410 10 m (Neutrik) FS0415 15 m (Neutrik) FS0420 20 m (Neutrik) FS043

FS18 - Speaker > Speaker, 2 x 1,5mm2

FS143 FS146 FS1410 FS1415 FS1420

FS20 - Speaker > Speaker, 2 x 1,5mm2

Length

FS183 FS186 FS1810 FS1815

Length

3m 6m 10 m 15 m

FS21 - Speaker Cable, 2 x 2,5mm2

3m 6m FS2010 10 m FS2015 15 m FS2020 20 m FS203

FS206

FS11 - Speaker/F > 2 XLR/F 3 p., 2 x 2,5mm2 Length

FS213 FS216 FS2110 FS2115 FS2120

Length

3m 6m 10 m 15 m 20 m

FS12 - 2 Speaker/F > Speaker/F, 2 x 2,5mm2

FS11150 1,5 m

FS13 - 2 Speaker/F > Speakon/M, 2 x 2,5mm2

Length

FS12150 1,5 m

248 01_07_DAP_PrefabCables_10_temp2011.indd 248

3 m (Neutrik) 6 m (Neutrik) 10 m (Neutrik) 15 m (Neutrik) 20 m (Neutrik)

Prefab Speakercables

FS13150 1,5 m (Neutrik)

[Prefab Cables] 07.03.11 12:06

Prefab Speakercables Pre refa fabb Ca fa Cabl bles bl es Prefab Speakercables FS15 - Speakon > Speakon, 4 x 4mm2

FS16 - Jack mono > Speakon/M, 2 x 1,5mm2

Length

FS153 FS156 FS1510 FS1515 FS1520

Length

3 m (Neutrik) 6 m (Neutrik) 10 m (Neutrik) 15 m (Neutrik) 20 m (Neutrik)

3 m (Neutrik) 6 m (Neutrik) FS1610 10 m (Neutrik) FS1620 20 m (Neutrik) FS163

FS166

FS05 - Speaker/F > Pomona, 2 x 2,5mm2

FS06 - XLR/M 3 p. > Pomona, 2 x 2,5mm2

Length

FS05150 1,5 m

FS07 - XLR/F 3 p. > Pomona, 2 x 2,5mm2

FS06150 1,5 m

FS08 - Speaker/F > XLR/M 3 p., 2 x 2,5mm2

Length

FS07150 1,5 m

FS09 - Speaker/F > XLR/F 3 p., 2 x 2,5mm2

FS08150 1,5 m

FS10 - Speaker/F > 2 XLR/M 3 p., 2 x 2,5mm2

Length

FS09150 1,5 m

Prefab Speakercables 01_07_DAP_PrefabCables_10_temp2011.indd 249

FS10150 1,5 m

[Prefab Cables]

249 07.03.11 12:06

Prefab Mic./Linecables Pre refa fabb Ca fa Cabl bles bl es Prefab Mic./Linecables FL01 - bal. XLR/M 3 p. > XLR/F 3 p.

XGL12 - XLR/M > XLR/F Length

Length

75 cm FL01150 1,5 m FL013 3 m FL016 6 m FL0110 10 m FL0115 15 m FL0120 20 m FL0175

FL71 - bal. XLR/M 3 p. > XLR/F 3 p.

XGL1275 0,75 m XGL12150 1,5 m XGL123 3 m XGL126 6 m XGL1210 10 m

FL09 - bal. XLR/M 3 p. > XLR/F 3 p. Length

Length

FL71150 1,5 m (Neutrik)

FL09150 1,5 m

3 m (Neutrik) 6 m (Neutrik) 10 m (Neutrik)

3m 6m FL0910 10 m FL0915 15 m FL0920 20 m

FL713 FL716 FL7110

FL093

FL096

Digital cable AES-EBU 110 Ohm

To avoid unnecessary signal-distortion with digital signaltransmission it is advisable to use the DAP FL09 (Digital AES-EBU norm) 110 Ohm cable.

FL03 - bal. XLR/F 3 p. > Jack stereo

FL04 - bal. XLR/M 3 p. > Jack stereo Length

Length

FL03150 1,5 m FL033 FL036

FL04150 1,5 m

3m 6m

FL02 - unbal. XLR/F 3 p. > Jack mono

FL043 FL046

FL13 - unbal. XLR/M 3 p. > Jack mono

Length

FL02150 1,5 m FL023 FL026

250 01_07_DAP_PrefabCables_10_temp2011.indd 250

3m 6m

FL13150 1,5 m

3m 6m

Prefab Mic./Linecables

[Prefab Cables] 07.03.11 12:06

Prefab Mic./Linecables Pre refa fabb Ca fa Cabl bles bl es Prefab Mic./Linecables FL07 - bal. stereo Jack > stereo Jack

FL36 - 2 bal. XLR/M 3 p. > Jack stereo Length

Length

FL07150 1,5 m FL073 FL076 FL0710

FL36150 1,5 m

3m 6m 10 m

FL38 - bal. XLR/M 3 p. > 2 XLR/F 3 p.

FL37 - 2 bal. XLR/F 3 p. > Jack stereo

Length

FL38150 1,5 m

FL37150 1,5 m

FL40 - bal. stereo Jack to stereo contra-Jack

FL39 - bal. XLR/F 3 p. > 2 XLR/M 3 p.

Length

FL39150 1,5 m

FL403 FL406 FL4010

FL06 - unbal. Jack mono > Jack mono

FL05 - unbal. Jack mono > Jack mono Black

Length

FL05150 1,5 m

FL066

6m with Golden Tip

3m 6m 10 m 15 m

FL0610

10m with Golden Tip

FL053 FL056 FL0510 FL0515

FL10 - unbal. Jack mono > Jack mono 90째 Black

With Golden Tip.

FL28 - unbal. Jack mono > Jack mono

Length

FL10150 1,5 m FL103 FL106

FL28150 1,5 m

3m 6m

Prefab Mic./Linecables 01_07_DAP_PrefabCables_10_temp2011.indd 251

3m 6m 10 m

FL283 FL286

[Prefab Cables]

3m 6m

251 07.03.11 12:07

Prefab Mic./Linecables Pre refa fabb Ca fa Cabl bles bl es Prefab Mic./Linecables FL29 - unbal. Jack mono > Jack mono 90째

FL43 - 2 unbal. Jack mono L/R > 2 XLR/F 3 p.

Length

FL29150 1,5 m FL293 FL296

FL43150 1,5 m

3m 6m

FL433

FL44 - 2 unbal. Jack mono L/R > 2 XLR/M 3 p. Length

FL44150 1,5 m FL443

Prefab Line/Instrumentcables FL25 - 2 RCA Male L/R > 2 XLR/F 3 p.

FL26 - 2 RCA Male L/R > 2 XLR/M 3 p.

Length

FL25150 1,5 m FL253

FL26150 1,5 m

FL23 - 2 RCA Male L/R > 2 mono Jack L/R

FL263

FL24 - 2 RCA Male L/R > 2 RCA Male L/R

Length

FL23150 1,5 m FL233

FL2475

FL243

01_07_DAP_PrefabCables_10_temp2011.indd 252

Prefab Mic./Linecables

0,75 m

FL24150 1,5 m FL246

252

3m 6m

[Prefab Cables] 07.03.11 12:07

Prefab Line/Instrumentcables Pre refa fabb Ca fa Cabl bles bl es Prefab Line/Instrumentcables FL27 - 2 RCA Male L/R > 2 RCA Female L/R

FL22 - 2 mono Jack L/R > 2 mono Jack L/R

Length

0,75 m FL27150 1,5 m FL273 3 m FL276 6 m

FL22150 1,5 m

FL2775

FL21 - 3 mono Jack > 3 mono Jack

FL223 FL226

FL20 - 4 mono Jack > 4 mono Jack Length

Length

FL21150 1,5 m FL213

FL20150 1,5 m

FL31 - stereo mini Jack > 2 mono Jack L/R

FL203

Length

FL31150 1,5 m FL313

FL32 - mono Jack > 2 mono Jack L/R

Length

FL32150 1,5 m

FL33 - mono Jack > 2 RCA Male L/R

FL323

FL34 - stereo Jack > 2 mono Jack L/R Length

Length

FL33150 1,5 m FL333

FL3475

FL343

Prefab Line/Instrumentcables

0,75 m

FL34150 1,5 m FL346

01_07_DAP_PrefabCables_10_temp2011.indd 253

3m 6m

[Prefab Cables]

3m 6m

253 07.03.11 12:07

Prefab Line/Instrumentcables Pre refa fabb Ca fa Cabl bles bl es Prefab Line/Instrumentcables FL35 - Stereo Jack > 2 RCA Male L/R

FL30 - stereo mini Jack > 2 RCA Male L/R Length

Length

FL35150 1,5 m FL353 FL356

FL30150 1,5 m

3m 6m

FL303 FL306

3m 6m

FL45 - Mini-Jack to Mini-Jack Length

FL45150 1,5 m FL453 FL456

3m 6m

Prefab Guitarcables FL16 - Stage Guitarcable straight Ø6 mm

FL18 - Stage Guitarcable straight Ø6 mm 90°

Length

FL166 FL1610

Length

6m 10 m

FL17 - Road Guitarcable straight Ø7 mm

FL186 FL1810

FL19 - Road Guitarcable straight Ø7 mm 90°

Length

FL176 FL1710

254

Length

6m 10 m

Prefab Line/Instrumentcables

01_07_DAP_PrefabCables_10_temp2011.indd 254

6m 10 m

FL196 FL1910

6m 10 m

[Prefab Cables] 07.03.11 12:07

Prefab Patchcables Pre refa fabb Ca fa Cabl bles bl es Prefab Patchcables FL11 - 6 coloured unbal. patch

FL12 - 6 coloured bal. patch Length

FL1130 FL1160 FL1190

Length

30 cm 60 cm 90 cm

FL14 - 6 coloured unbal. patch straight > 90°

FL1230 FL1260 FL1290

FL15 - 6 coloured bal. patch straight > 90°

Length

FL1430 FL1460 FL1490

Length

30 cm 60 cm 90 cm

FL41 - 6 coloured unbal. patch 90° > 90°

FL1530 FL1560 FL1590

FL4160 FL4190

Length

30 cm 60 cm 90 cm

Prefab Patchcables 01_07_DAP_PrefabCables_10_temp2011.indd 255

30 cm 60 cm 90 cm

FL42 - 6 coloured bal. patch 90° > 90°

Length

FL4130

30 cm 60 cm 90 cm

30 cm 60 cm FL4290 90 cm FL4230

FL4260

[Prefab Cables]

255 07.03.11 12:08

Prefab Patchcables Pre refa fabb Ca fa Cabl bles bl es Sometimes simple solutions work the best! The DAP Snap Fasteners are just like that! Simple, easy to handle and available in different lengths: these strips can be used in a wide range of situations where you need to organize and tighten up cable-gear!

Snap Fastener

Snap Fastener 22

D9561

D9575B

18 cm long, 1,5 cm width, 10 pieces

Black - 10 pcs - 22,5 x 2,5 cm

D9562

D9575U

Blue - 10 pcs - 22,5 x 2,5 cm

D9563

D9575R

30 cm long, 2,5 cm width, 10 pieces

Red - 10 pcs - 22,5 x 2,5 cm

D9564

D9575G

40 cm long, 3 cm width, 5 pieces

Green - 10 pcs - 22,5 x 2,5 cm

D9565

D9575Y

70 cm long, 4 cm width, 5 pieces

Yellow - 10 pcs - 22,5 x 2,5 cm

Snap Fastener 2,5 cm width

Snap Fastener 27

D9566

D9576B

22,5 cm long, 10 pieces

Black - 10 pcs - 27,5 x 2,5 cm

D9567

D9576U

D9568

Blue - 10 pcs - 27,5 x 2,5 cm D9576R

2,5 cm

Red - 10 pcs - 27,5 x 2,5 cm

D9569

D9576G

46,5 cm long, 10 pieces

27,5 cm

27,5 cm long, 10 pieces 36 cm long, 10 pieces

22,5 cm

22 cm long, 2 cm width, 10 pieces

Green - 10 - 27,5 x 2,5 cm D9576Y

Yellow - 10 pcs - 27,5 x 2,5 cm

Snap Fastener 5 cm width

Snap Fastener 36

D9570

D9577B

22,5 cm long, 10 pieces

Black - 10 pcs - 36 x 2,5 cm

D9571

D9577U

D9572

46,5 cm long, 10 pieces D9573

61 cm long, 10 pieces

Blue - 10 pcs - 36 x 2,5 cm m 5c

D9577R

Red - 10 pcs - 36 x 2,5 cm

36 cm

36 cm long, 10 pieces

D9577G

Green - 10 pcs - 36 x 2,5 cm D9577Y

Yellow - 10 pcs - 36 x 2,5 cm

256 01_07_DAP_PrefabCables_10_temp2011.indd 256

Prefab Patchcables

[Prefab Cables] 07.03.11 12:08

Prefab MIDI Cables Pre refa fabb Ca fa Cabl bles bl es Prefab MIDI Cables FL50 - DIN 5 p > DIN 5 p

FL51 - DIN 5 p > DIN 5 p Length

Length

0,75 m FL50150 1,5 m FL503 3 m FL506 6 m FL5010 10 m FL5075

FL52 - DIN 5 p > DIN 5 p

FL513 FL516

3m 6m

FL80 - DIN 8 p > DIN 8 p Length

FL523 FL526

Length

3m 6m

FL8015 FL8025

15 m 25 m

8-Way Studiosnakes Creating a well organized workspace in a recordingstudio, DJ-workfloor and every other situation where you need to patch equipment can be a frustrating experience. Lots of cables going everywhere and nowhere: from effects to mixers, from playback-gear to recorders, from mixers to amps and so on. No wonder you loose control and a clear sight. To help with this situation DAP-audio provides just the right tools: the studiosnakes. A studiosnake contains a couple of patchlines in just one cable, avoiding a huge amount of separate cables. Clear numbering and a professional quality are one of the features of these fine products.

FL60 - 8 XLR/M 3 p. > 8 XLR/F 3 p.

FL61 - 8 XLR/F 3 p. > 8 Jack mono Length

FL61300 3 m

FL60600 6 m

FL61600 6 m

Prefab MIDI Cables 01_07_DAP_PrefabCables_10_temp2011.indd 257

Length

FL60300 3 m

[Prefab Cables]

257 07.03.11 12:08

8-Way Studiosnakes Pre refa fabb Ca fa Cabl bles bl es 8-Way Studiosnakes FL62 - 8 XLR/M 3 p. > 8 Jack mono

FL63 - 8 Jack mono > 8 Jack mono Length

Length

FL62300 3 m

FL63300 3 m

FL62600 6 m

FL63600 6 m

FL64 - 8 Jack mono > 8 RCA/M

FL65 - 8 RCA/M > 8 RCA/M Length

Length

FL64300 3 m

FL65300 3 m

FL64600 6 m

FL65600 6 m

FL66 - 8 Jack stereo > 8 Jack stereo

FL67 - 8 XLR/F 3 p. > 8 Jack stereo Length

Length

FL66300 3 m

FL67300 3 m

FL66600 6 m

FL67600 6 m

FL68 - 8 XLR/M 3 p. > 8 Jack stereo

FL69 - 8 Jack mono > 4 Jack stereo Length

258 01_07_DAP_PrefabCables_10_temp2011.indd 258

Length

FL68300 3 m

FL69300 3 m

FL68600 6 m

FL69600 6 m

8-Way Studiosnakes

[Prefab Cables] 07.03.11 12:08

PC Interface Cables Pre refa fabb Ca fa Cabl bles bl es PC Interface Cables FC01 - USB-A > USB-A

FC02 - USB-A > USB-B Length

Length

FC01150 1,5 m FC013

FC02150 1,5 m

FC023

FC05 - Mini-Din 8 p. > Sub D 25 p.

FC04 - Mini-Din 8 p. > Sub D 9 p.

Length

FC05150 1,5 m

FC04150 1,5 m FC043

FC06 - Mini-Din 8 p. > Mini-Din 8 p.

FC053

FC07 - 2 Sub D 15 p. > Midi In/Out Length

Length

FC06150 1,5 m FC063

FC07150 1,5 m

FC073

(also used as CD remote cable)

FL55 - CAT-5 cable Special features: • Ethernet • 7,6 mm Matte blue PVC • Flexible cable

Length

FL55150 150 cm FL553 FL556 FL5510 FL5515 FL5520

CAT5E Cable

CAT-6 Cable Length

Length

3 m, Ethernet 6 m, Ethernet FL5610 10 m, Ethernet FL5615 15 m, Ethernet FL5640 40 m, Ethernet

FL57150 With Neutrik

FL563

Ethercon 1,5m

FL573 FL576 FL5710 FL5715 FL5720

FL566

With Neutrik Ethercon 3m With Neutrik Ethercon 6m With Neutrik Ethercon 10m With Neutrik Ethercon 15m With Neutrik Ethercon 20m

PC Interface Cables 01_07_DAP_PrefabCables_10_temp2011.indd 259

3m 6m 10 m 15 m 20 m

[Prefab Cables]

259 07.03.11 12:08

Prefab Power/Signal Cables Pre refa fabb Ca fa Cabl bles bl es Prefab Power/Signal Cables FP04 Schuko-IEC

FP05

Length

10 m LIGHT Power/Signal Cable FP0415 15 m LIGHT Power/Signal Cable FP0420 20 m LIGHT Power/Signal Cable FP0410

FP06 Schuko-Powercon Length

FP08 Schuko-IEC Length

10 m LIGHT Power/Signal Cable FP0615 15 m LIGHT Power/Signal Cable FP0620 20 m LIGHT Power/Signal Cable FP0610

FP09 Schuko-Schuko

10 m AUDIO Power/Signal Cable 15 m AUDIO Power/Signal Cable FP0820 20 m AUDIO Power/Signal Cable FP0810 FP0815

FP10 Schuko-Powercon

Length

10 m AUDIO Power/Signal Cable FP0915 15 m AUDIO Power/Signal Cable FP0920 20 m AUDIO Power/Signal Cable FP0910

260

3 m LIGHT Power/Signal Cable 6 m LIGHT Power/Signal Cable FP0510 10 m LIGHT Power/Signal Cable FP0515 15 m LIGHT Power/Signal Cable FP0520 20 m LIGHT Power/Signal Cable FP053

FP056

10 m AUDIO Power/Signal Cable 15 m AUDIO Power/Signal Cable FP1020 20 m AUDIO Power/Signal Cable FP1010 FP1015

Prefab Power/Signal Cables

01_07_DAP_PrefabCables_10_temp2011.indd 260

[Prefab Cables] 07.03.11 12:09

Prefab Power/Signal Cables Pre refa fabb Ca fa Cabl bles bl es Prefab Power/Signal Cables Powercon / XLR Extension Cable Length

90480 90481 90482 90483 90484

Length

90486 90487 90488 90489

Length

90491 90492 90493 90494

50cm 150cm 3m 6m 10m

Prefab Power/Signal Cables 01_07_DAP_PrefabCables_10_temp2011.indd 261

NEW PRODUCT

50cm 150cm 3m 6m 10m

Powercon / Ethercon Extension Cable 90490

75cm 150cm 3m 6m 10m

Powercon / RJ45 Extension Cable 90485

NEW PRODUCT

[Prefab Cables]

261 07.03.11 12:09

Stage & Multisnakes Mul ulti tico ti core co re

Stagesnakes

Speaker Multicable

For those wo are familiar with the “stage-environment” know the problem: cables all over the place! Specially around drums or the keyboards you probably will find a “cable-spagetti”: all lines going directly to the main stagewheel to get connected to the mixingconsole. The best and simpliest way to solve this problem is to use the so-called Stagesnakes. A stage-snake is best discribed as a sub-multicable, which is connected to the main multicable (Stagewheel) and gives you a more clean and ordered look and configuration on stage and behind the scenes. Note that a stagesnake has no “return” from the mixer on the box. There are several models available from DAP-audio.

Length

D960215

4-Way, 15 m, 6,5 kg

6-Way XLR Stagesnake

8-Way XLR Stagesnake Length

Length

D951110 D951115

10 m 15 m

D951210 D951215 D951215N

10 m Black 15 m Black 15 m Silver, 3,4 kg

Suspension Loop D9556

12-Way XLR Stagesnake

XLR Multisnake 12 in 4 out

Length

D951315

8 to 20 pair

Length

15 m, 5,4 kg

D950115 D950130

XLR Multisnake 16 in 4 out

XLR Multisnake 24 in 4 out

Length

D950230

Length

30 m, 15,8 kg

D950330

Stagebox for Powermixer

30 m, 23,64 kg

Stagebox for Backline

Length

D951630

15 m, 7,4 kg 30 m, 12,48 kg

Length

Multicable designed for active mixing consoles, 12 inputs, 30 m

262 01_08_DAP_Multicore_10_temp2011.indd 262

D950815

Stage & Multisnakes

15 m, 9,96 kg

[Multicore] 07.03.11 12:16

Stage & Multisnakes Mul ulti tico ti core co re Cobra 24/4 Multisnake 24 in, 4 out.

Cobra 12/4 Multisnake 12 in, 4 out.

Length

D951930

Black, 30m

D951715

Black, 15m

Cobra 12/4 Multisnake 12 in, 4 out.

Cobra 16/4 Multisnake 16 in, 4 out.

Length

D951730

Black, 30m

D951830

Stage & Multisnakes 01_08_DAP_Multicore_10_temp2011.indd 263

Black, 30m

[Multicore]

263 07.03.11 12:16

Stage & Multisnakes Mul ulti tico ti core co re Stagebox D9620

Assembled, 32 in, 4 out, Neutrik Connectors

• Professional Multicable system • Neutrik XLR connectors • Ilme Multi connectors • 19 inch 8U Stagebox

Technical information: Pin connection: Grey= Shield Red= Hot Blue= Cold

Multicore Mixer Split

PIN2

PIN1

PIN2

PIN3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

91 92 93 94 95 96 97 98 90 100 101 102 103 104 105 106 107 108

XLR2 XLR4 XLR6 XLR8 XLR10 XLR12 XLR14 XLR16 XLR18 XLR20 XLR22 XLR24 XLR26 XLR28 XLR30 XLR32 XLR34 XLR36

Multicore

Available models:

D9640

PIN3 XLR1 XLR3 XLR5 XLR7 XLR9 XLR11 XLR13 XLR15 XLR17 XLR19 XLR21 XLR23 XLR25 XLR27 XLR29 XLR31 XLR33 XLR35

Available models:

Assembled, 108 pole ilme male - Neutrik XLR 32x male, 4x female (2,5 m)

D9632 D9631 D9630

Assembled, 108 pole female - 108 pole female 5 m, ilme Assembled, 108 pole female - 108 pole female 30 m, ilme Assembled, 108 pole female - 108 pole female 50 m, ilme

Stagewheels Python 8 D9509

Cabledrum with BNC Cable

Stagewheel 8x XLR, 16m. cable, 4,78 kg

264 01_08_DAP_Multicore_10_temp2011.indd 264

D952950

50 m BNC Cable, 7,36 kg

Stage & Multisnakes

Cabledrum with 2 x XLR + Schuko D952830

30 m Powercable 1,5 mm, 12,86 kg

[Multicore] 07.03.11 12:16

Stagewheels Mul ulti tico ti core co re

dirt cover for connectors

pro-quality Sub-D chassis

Standard strain-reliefs

Standard suspension loops

Standard SpinStar

Stagewheel 16 In - 4 out

Stagewheel 24 In - 4 out

Length

30 m, Studio D952150 50 m, Studio D952530 30 m, Shielded Stage

30 m, Studio 50 m, Studio D952430 30 m, Shielded Stage

D952130

Stagewheel 24 In - 8 out 30 m, 32 pairs! Studio

D952230

D952250

Stagewheel Flightcase

D952330

D7362B

Dimensions: Weight:

Stagewheels 01_08_DAP_Multicore_10_temp2011.indd 265

675 x 535 x 500 mm (LxWxH) 19,8 kg

[Multicore]

265 07.03.11 12:17

Empty Wheels & Boxes Mul ulti tico ti core co re

Cable Drums

The New DAP cable drum series offers a wide range of different types of professional metal cable drums. The first type is a standard construction of cable drum, with one handle only. The second type is constructed in another way, with two handles. The cable drums are made of a solid steel frame construction. All these models are available in two colours: black and orange. For all types with one handle 3 mounting panels are included.

Cable Drum 27 cm Available models:

D9535O D9535B

Orange Black

• Colour: Orange • Diameter: 27 cm • Handle: 1 • Mounting panel included • Weight: 4,4 kg • Dimensions: 300 x 250 x 375 mm

Cable Drum 30 cm Available models:

D9536O D9536B

Orange Black

• Colour: Orange • Diameter: 30 cm • Handle: 1 • Mounting panel included • Weight: 4,6 kg • Dimensions: 370 x 275 x 460 mm

Cable Drum 35 cm Available models:

D9537O D9537B

Orange Black

• Colour: Orange • Diameter: 35 cm • Handle: 1 • Mounting panel included • Weight: 6 kg • Dimensions: 400 x 325 x 565 mm

Cable Drum 51 cm

Cable Drum 55 cm

Available models:

D9538O D9538B

Orange Black

• Colour: Orange • Diameter: 51 cm • Handle: 2 • Weight: 7,6 kg • Dimensions: 550 x 350 x 520 mm

266 01_08_DAP_Multicore_10_temp2011.indd 266

D9539O D9539B

Orange Black

• Colour: Orange • Diameter: 55 cm • Handle: 2 • Weight: 8,4 kg • Dimensions: 700 x 350 x 520 mm

Empty Wheels & Boxes

[Multicore] 07.03.11 12:17

Empty Wheels & Boxes Mul ulti tico ti core co re Empty Stagewheel

Empty Stagewheel

28 holes for XLR-chassis, for max. 50 m 28 pair cable

70122

Mounted XLR-connectors, for max. 50 m 28 pair cable

70131

â&#x20AC;˘ Extra plate without holes â&#x20AC;˘ Incl. connectors

Stagebox 16 FSB16

12 in 4 out + XLR chassis

Stagebox 20 FSB20

Stagebox 28

16 in 4 out + XLR chassis

FSB28

24 in 4 out + XLR chassis

Multicore accessories Spin-Star 32 pair

Strain Relief

D9555

Available models:

D9551

8 to 20 pair

D9552

20 to 36 pair

Suspension Loop Available models:

D9556

8 to 20 pair

D9557

20 to 36 pair

Technical Information An extremely handy gadget for your stagewheels and snakes! No more cable-mess!

Empty Wheels & Boxes 01_08_DAP_Multicore_10_temp2011.indd 267

[Multicore]

267 07.03.11 12:17

Multicore Cable Mul ulti tico ti core co re MK-422 4 Pair Studio Multicore

MK-822 8 Pair Studio Multicore

MK-1222 12 Pair Studio Multicore

MK-1622 16 Pair Studio Multicore

Technical Information Price p. m. Max. 500m on spool Number of pairs: 4 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0 Pair shield: Alufoil + tinned drainwire Master jacket Ø in mm: PVC, dark blue, 10 Minimal bending radius: ≥100 Weight (kg/100 m): 120

Technical Information Price p. m. Max. 500m on spool, Single shielded Number of pairs: 8 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0 Pair shield: Alufoil + tinned drainwire Master jacket Ø in mm: PVC, dark blue, 13,5 Minimal bending radius: ≥135 Weight (kg/100 m): 210

Technical Information Price p. m. Max. 500m on spool Single shielded Number of pairs: 12 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0 Pair shield: Alufoil + tinned drainwire Master jacket Ø in mm: PVC, dark blue, 15 Minimal bending radius: ≥150 Weight (kg/100 m): 300

Technical Information Price p. m. Max. 500m on spool Single shielded Number of pairs: 16 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0 Pair shield: Alufoil + tinned drainwire Master jacket Ø in mm: PVC, dark blue, 18,5 Minimal bending radius: ≥185 Weight (kg/100 m): 400

D9441

D9442

D9443

MK-2022 20 Pair Studio Multicore, single shielded, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket Ø in mm: Pair shield: Master jacket Ø in mm: Minimal bending radius: Weight (kg/100 m):

D9449

36 PE, red+white, 1,0 PVC blue, (numbered), 3,0 Alufoil + tinned drainwire PVC, dark blue, 26,5 ≥265 880

MK-4822 48 pair Studiomulticore, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket diameter in mm: Pair Shield: Master jacket diameter:

D9448

32 PE, red+white, 1,0 PVC blue, (numbered), 3,0 Alufoil + tinned drainwire PVC, dark blue, 25,5 ≥255 800

MK-3622 36 Pair Studio Multicore, single shielded, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket Ø in mm: Pair shield: Master jacket Ø in mm: Minimal bending radius: Weight (kg/100 m):

D9447

28 PE, red+white, 1,0 PVC blue, (numbered), 3,0 Alufoil + tinned drainwire PVC, dark blue, 24,5 ≥245 770

MK-3222 32 Pair Studio Multicore, single shielded, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket Ø in mm: Pair shield: Master jacket Ø in mm: Minimal bending radius: Weight (kg/100 m):

D9446

24 PE, red+white, 1,0 PVC blue, (numbered), 3,0 Alufoil + tinned drainwire PVC, dark blue, 22 ≥220 655

MK-2822 28 Pair Studio Multicore, single shielded, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket Ø in mm: Pair shield: Master jacket Ø in mm: Minimal bending radius: Weight (kg/100 m):

D9445

20 PE, red+white, 1,0 PVC blue, (numbered), 3,0 Alufoil + tinned drainwire PVC, dark blue, 18,5 ≥185 545

MK-2422 24 Pair Studio Multicore, single shielded, price p. m. Technical Information Max. 500m on spool Number of pairs: Conductor insulation Ø in mm: Pair jacket Ø in mm: Pair shield: Master jacket Ø in mm: Minimal bending radius: Weight (kg/100 m):

D9444

D9450

48 HDPE Red/Black 1,0 mm PVC Blue 1 mm Alufoil + tinned drainwire 22,3 mm

268 01_08_DAP_Multicore_10_temp2011.indd 268

Multicore Cable

[Multicore] 07.03.11 12:17

Multicore Cable Mul ulti tico ti core co re MK-432 4 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 4 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9451

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 10,8 braided tinned copper ≥11 mm 17

MK-832 8 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 8 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9452

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 13,5 braided tinned copper ≥13,5 mm 27

MK-1232 12 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 12 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9453

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 16,5 braided tinned copper ≥15 mm 38

MK-1632 16 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 16 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9454

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 17,5 braided tinned copper ≥17,5 mm 47

MK-2032 20 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 20 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9455

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 21,5 braided tinned copper ≥21,5 mm 58

MK-2432 24 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 24 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9456

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 22,5 braided tinned copper ≥22,5 mm 78

MK-2832 28 Pair Stage Multicore, double shielded Technical Information Price p. m. Max. 500m on spool Number of pairs: 28 Conductor insulation Ø in mm: PE, red+white, 1,0 Pair jacket Ø in mm: PVC blue, (numbered), 3,0

D9457

Pair shield: Master jacket Ø in mm: Master Shield: Minimal bending radius: Weight (kg/100 m):

Alufoil + tinned drainwire PVC, dark blue, 25,5 braided tinned copper ≥22,5 mm 81

Multicore Cable 01_08_DAP_Multicore_10_temp2011.indd 269

[Multicore]

269 07.03.11 12:17

Multicore Connectors Mul ulti tico ti core co re PG29 Trumpet Screw for 16/24 Pole

Cablehood Side Entry PG 29

Available models

90724

Available models

Cable entry 32 mm

90744 90745

Cablehood Top Entry PG 29

Audio Insert Male

Available models

90743 90748

Grey, 16/72 Pole Grey, 24/108 Pole

Available models

Grey, 24/108 Pole Grey, 16/72 Pole, High-model

Audio Insert Female

90752 90754

Without Contactpins, 72 Pole Without Contactpins, 108

Chassis Closed Bottom/Clips PG29 Available models

90751 90753

Available models

Without Contactpins, 72 Pole Without Contactpins, 108 Pole

Audio Contactpin Silverplated

90746 90747

Guide Pin

Available models

90756 90755

Grey, 16/72 Pole Grey, 24/108 Pole

Available models

Male Female

90757M Male 90757F

Female

Technical Information Conductor entry: 0,14 - 0,3 mm Conductor-stripping: 9 mm

Insertion Tool

For insertion of the pin-contacts into the inserts.

90763

270 01_08_DAP_Multicore_10_temp2011.indd 270

Removal Tool Budget Version

To remove the pin-contacts from the inserts.

90764B

Multicore Connectors

[Multicore] 07.03.11 12:17

How to connect Mul ulti tico ti core co re Guitar cable

Recommended cable:

mono Jack & mono Jack

D9411B, R, U

Jack M 6,3mm

Shield Inner conductor

Line cable

Recommended cable:

RCA plug & mono 6,3mm Jack

D9411B, R, U

RCA M

Jack M 6,3mm

Shield Inner conductor

Line cable

Recommended cable:

RCA plug & XLR

D9411B, R, U

XLR F

RCA M

Shield

1 3

Inner conductor

Balanced mic. cable

Recommended cable:

3-pin XLR & mono Jack

D9411B, R, U

XLR F

Jack M 6,3 mm

Shield 2

1 3

Inner conductor

Balanced mic. cable

Recommended cables:

XLR F 2

3-pin XLR & Stereo Jack

Balanced mic. cable on both sides 3-pin XLR

AES EBU Digital cable

XLR F

Inner conductor + 2

1 3

D9433B, D9433U

Speaker cable

Recommended cables:

3-pin XLR & 3-pin XLR

D9102, D9103, D9203, D9201, D9202

Speaker cable

Recommended cables:

3-pin XLR & mono Jack

D9101, D9102, D9103, D9203, D9201

How to connect

Shield

XLR M 1

2 3

Inner conductor -

Inner conductor +

XLR F 2

USIT DMX-512 cable on both sides: 3-pin XLR

01_08_DAP_Multicore_10_temp2011.indd 271

Inner conductor Inner conductor +

D9421U, D9434B, D9435B, D9431B, G, R, U, Y D9432B, G, R, U, Y

Recommended cables:

Jack Stereo M 6,3 mm

Shield

D9421U, D9434B, D9435B, D9431B, G, R, U, Y D9432B, G, R, U, Y

Recommended cables:

1 3

Shield

XLR M 1

2 3

Inner conductor -

XLR F

XLR M 2

Signal -

2 3

Signal +

XLR F

Signal 2

Jack M 6,3 mm

1 3

Signal +

[Multicore]

271 07.03.11 12:18

Mic./Line Cables Cab able less on spo le pool ol

Mic./Line Cables MK-SPIN Mic/line cable, 100 m on spool • Conductor drains Ø mm: OFC 18 x 0,10 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation:

PE red+white 1,0 (Ø in mm) alufoil + tinned drainwire 7 x 0,18 PVC dark blue 3 (Ø in mm)

D9421U Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

160 Ohm/Km 60 pF/m

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

160 Ohm/Km 60 pF/m

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

160 Ohm/Km 60 pF/m

-20~60 °C 30V 110 Ohm

MC-205 Mic/line cable, 100 m on spool • Conductor drains Ø mm: OFC 10 x 0,10 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation Ø in mm:

PE red+white 1,0 (Ø in mm) OFC twisted 40 x 0,12 PVC matte black 5

D9434B

-20~60 °C 30V 110 Ohm

MC-206 Mic/line cable, 100 m on spool • Conductor drains Ø mm: OFC 10 x 0,10 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation Ø in mm:

PE red+blue 1,0 (Ø in mm) OFC twisted 40 x 0,12 PVC black 6

D9435B

-20~60 °C 30V 110 Ohm

MC-216 Black mic/line cable, 100 m on spool • Conductor drains Ø mm: OFC 28 x 0,10 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation:

PE red+blue 1,5 (Ø in mm) paper + cotton yarn OFC twisted 83 x 0,12 PVC black, blue, red, yellow, green • Outer isolation Ø in mm: 6

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

80 Ohm/Km 25 Ohm/Km 60 pF/m 78 pF/m -20~60 °C 30V 110 Ohm

Black

Blue

Red

Green

Yellow

Black

Blue

Red

Green

Yellow

Black

Blue

D9431B

D9431U

D9431R

D9431G

D9431Y

MC-226 Black microphone cable double isolation, 100 m on spool • Conductor drains Ø mm: OFC 15 x 0,12 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation:

PE red+white 1,5 (Ø in mm) 2 x Conductive plastic OFC twisted 96 x 0,12 PVC black, blue, red, yellow, green • Outer isolation Ø in mm: 6

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

90 Ohm/Km 25 Ohm/Km 60 pF/m 78 pF/m -20~60 °C 30V 110 Ohm

D9432B

D9432U

D9432R

D9432G

D9432Y

DIG-110 AES-EBU Black 110 Ohm Digital Cable, 100 m on spool • Conductor drains Ø mm: OFC 18 x 0,10 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation Ø in mm:

272

FPE red+white 1,9 (Ø in mm) paper + cotton yarn OFC braided 128 x 0,12 PVC black+blue 6

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature min. / max.: Working Voltage overflash: Nom Impedance:

130 Ohm/Km 12.5 Ohm/Km 35 pF/m 52 pF/m -20~60 °C 30V 110 Ohm

Mic./Line Cables

01_09_10_DAP_Cablespool_merch_10_temp2011.indd 272

D9433B

D9433U

[Cables on spool] 07.03.11 12:26

Mic./Line Cables Cab able less on spo le pool ol

Mic./Line Cables Dig-Quad DMX Quad 4pole digital cable Conductor drains Ø mm: Conductor insulation: Conductor insulation: Filler material: 1st shield: 2nd shield: Outer isolation: Outer isolation:

OFC LDPE white+red +yellow+black 1,6 (Ø in mm) paper braided tinned copper 7 x 14 x 0,12 PVC matte black 7 (Ø in mm)

D9471 Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conductor Shield: Working temperature: Working Voltage overflash: Nom impedance: Length:

130 Ohm / km 12,5 Ohm / km 35 pF/m 52 pF/m -20 ~ 60 °C (min./max.) 30V 110 Ohm 100 m

MCD-224 Dual line cable, 100 m on spool • Conductor drains Ø mm: OFC 20 x 0,12 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation Ø in mm:

PE 1,4 (Ø in mm) OFC braided PVC black 2x4

D9422U

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

80 Ohm/Km 25 Ohm/Km 65 pF/m 82 pF/m -20~60 °C (min. / max.) 30V 100 Ohm

Line/Instrument Cables LC-126 Black line cable a-symmetric, 100 m on spool • Conductor drains Ø mm: OFC 7 x 0,20 • Conductor insulation: • Conductor insulation: • Filler material: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation Ø in mm:

PE transparent 2,4 (Ø in mm) Conductive plastic OFC 50 x 0,14 PVC black, red , blue 6

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

80 Ohm/Km 25 Ohm/Km 65 pF/m -20~60 °C (min. / max.) 30V 50 Ohm

Black

D9411B

Blue

D9411U

Red

D9411R

Powermulticore PMC-216 AUDIO Power/Signal Cable, price per m • Conductor drains Ø mm: OFC 20 x 0,10 (NF) & 3 x 1,5 (power) • Conductor insulation: PE red+white & PVC black (power) • Conductor insulation Ø: • Filler material: • 1st shield: • 2nd shield:

• Outer isolation: • Outer isolation Ø: Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

1,3 mm (NF) & 3,7 mm (power) paper+cotton yarn twisted tinned copper NF 96 x 0,10 -

D9481 PVC matte black 4 mm (NF) & 12 mm (power) 80 Ohm/Km 30 Ohm/Km 60 pF/m 78 pF/m -20~60 °C (min./max.) 30V 110 Ohm

PSC-211 Power/Signal Cable, price per m • Conductor drains Ø mm: OFC 20 x 0,10 (NF) & 3 x 1,5 (power) • Conductor insulation: PE red+black & PVC black (power) • Conductor insulation Ø: 1,3 mm (NF) • Filler material: paper • 1st shield: twisted copper NF 96 x 0,10 • 2nd shield: • Outer isolation: PVC matte blue

D9482

• Outer isolation Ø:

4 mm (NF) & 11 mm (power) 80 Ohm/Km 30 Ohm/Km 60 pF/m

Conductor resistance: Shield resistance: Capacity Inner conductor: Cap. Inner conduct. Shield / Inner conduct.: 78 pF/m Working temperature: -20~60 °C (min./max.) Working Voltage overflash: 30V Nom Impedance: 110 Ohm

Mic./Line Cables 01_09_10_DAP_Cablespool_merch_10_temp2011.indd 273

[Cables on spool]

273 07.03.11 12:26

Video Cables 75 Ohm Cab able less on spo le pool ol

Video Cables 75 Ohm AV-36 Audio/Video Cable a-symmetric 75 Ohm, 100 m on spool • Conductor drains Ø mm: OFC 20 x 0,12 • Conductor insulation: PE red + transparent • Conductor insulation: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation:

1,3 (Ø in mm) OFC twisted 32 x 0,12 PVC dark blue 2x3 (Ø in mm)

Conductor resistance: Shield resistance:

80 Ohm/Km 50 Ohm/Km

Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

D9401 160 pF/m -20~60 °C (min./max.) 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 / 90 MHz: 0,28000 / 100 MHz: 0,28530 / 220 MHz: 0,55350 / 470 MHz: 1,33130 / 770 MHz: 2,21180 / 1000 MHz: 3,0271

AV-48 Audio/Video Cable a-symmetric 75 Ohm, 100 m on spool • Conductor drains Ø mm: OFC 20 x 0,12 • Conductor insulation: PE red + transparent • Conductor insulation: • 1st shield: • 2nd shield: • Outer isolation: • Outer isolation:

1,3 (Ø in mm) OFC twisted 32x0,12 PVC dark blue 2x4 (Ø in mm)

Conductor resistance: Shield resistance:

80 Ohm/Km 50 Ohm/Km

Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

D9402 160 pF/m -20~60 °C (min./max.) 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 / 90 MHz: 0,28000 / 100 MHz: 0,28530 / 220 MHz: 0,55350 / 470 MHz: 1,33130 / 770 MHz: 2,21180 / 1000 MHz: 3,0271

AV-84 4-way Audio/Video Cable a-symmetric 75 Ohm 100 m on spool • Conductor drains Ø mm: OFC 20 x 0,12 • Conductor insulation: PE red + transparent + yellow + blue • Conductor insulation: 1,3 (Ø in mm) • 1st shield: OFC twisted 32 x 0,12 • 2nd shield: • Outer isolation: PVC dark blue • Outer isolation: 4 x 4 (Ø in mm) Conductor resistance: 80 Ohm/Km

274

Shield resistance: Cap. Inner conduct. Shield / Inner conduct.: Working temperature: Working Voltage overflash: Nom Impedance:

D9403

50 Ohm/Km 160 pF/m -20~60 °C (min./max.) 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 / 90 MHz: 0,28000 / 100 MHz: 0,28530 / 220 MHz: 0,55350 /470 MHz: 1,33130 / 770 MHz: 2,21180 / 1000 MHz: 3,0271

Video Cables 75 Ohm

01_09_10_DAP_Cablespool_merch_10_temp2011.indd 274

[Cables on spool] 07.03.11 12:26

Video Cables 75 Ohm Cables on spool

Video Cables 75 Ohm AV-14 Audio/Video Cable 75 Ohm, 100 m on spool • Conductor drains Ø mm: • Conductor insulation: • Conductor insulation: • Conductor resistance: • Outer insulation: • Working temperature: • Voltage overflash: • Nominal impedance:

0,4 PE 2,6 (Ø in mm) 138 Ohm/Km PVC 4,2 Ø in mm -20~50 °C (min./max.) 30V 75 Ohm

D9461

Attenuation: 10 MHz: 0,02270 / 90 MHz: 0,18650 / 100 MHz: 0,19060 / 220 MHz: 0,30640 470 MHz: 0,76580 / 770 MHz: 0,96420 / 1000 MHz: 1,6122

AV-80 Double Shielded Video Cable 75 Ohm, 100 m on spool • Conductor drains Ø mm: • Conductor insulation: • Conductor insulation: • Conductor resistance: • Outer insulation: • Working temperature: • Voltage overflash: • Nominal impedance:

0,58 PE 3,71 (Ø in mm) 65 Ohm/Km PVC 6,2 Ø mm -20~50 °C (min./max.) 30V 75 Ohm

Attenuation: 10 MHz: 0,01020 / 90 MHz: 0,07210 / 100 MHz: 0,06840 / 220 MHz: 0,11920 / 470 MHz: 0,20150 / 770 MHz: 0,28750 / 1000 MHz: 0,35850

Black

D9463B

AV-100 Super-Flex Shielded Video Cable 75 Ohm, 100 m on spool • Conductor drains Ø mm: • Conductor insulation: • Conductor insulation: • Conductor resistance: • Outer insulation: • Working temperature: • Voltage overflash: • Nominal impedance:

0,58 PE 3,71 (Ø in mm) 65 Ohm/Km PVC 4,2 Ø mm -20~50 °C (min./max.) 30V 75 Ohm

D9463W

D9462

Attenuation: 10 MHz: 0,02270 / 90 MHz: 0,18650 / 100 MHz: 0,19060 / 220 MHz: 0,30640 / 470 MHz: 0,76580 / 770 MHz: 0,96420 / 1000 MHz: 1,6122

AV-500 5 Way Video Cable 75 Ohm, price per meter • Conductor drains Ø mm: • Conductor insulation: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min./max.: • Voltage overflash: • Nominal impedance:

White

D9466

0,58 PE 3,71 65 Ohm/Km PVC 4,2 Ø in mm -20~50 °C 30V 75 Ohm

Cat-Cables

Flexible CAT-5e cable Reel 100 m

• Conductor drains Ø mm: • Conductor insulation: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min./max.: • Voltage overflash: • Nominal impedance:

D9409

Ø 0.60mm Bare copper high denisity PE Ø1.02 mm ± 0.03mm 0.0784 Ohm/m Ø 5.5 mm min :-30°C , max : 60°C max: 30V 100 Ohm

Cat-Flex Flexible CAT-5 cable p.m

D9410

• Conductor drains mm:

0,2 4 pair with cotton yard • Conductor insulation: PE • Conductor insulation: 1,1 (in mm) • Middle insulation: Matte Blue PVC • Middle insulation in mm: 6,0 • Outer insulation: Matte Blue PVC • Outer insulation in mm: 7,6

Video Cables 75 Ohm

[Cables on spool]

275

Speakercables Cables on spool

Speakercables SPE-275 Speakercable 2 x 0,75 mm, 100 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9101

OFC 2 x 0,75 2 x: 49 x 0,14 Ø PVC 2 x 2,8 0,03 2,8 x 5,6 (PVC black & black/red) -10~60 °C 250V 100 m on spool

SPE-215 Length

D9102 D9102500

Speakercable 2 x 1,5 mm, 100 m on spool Speakercable 2 x 1,5 mm, 500 m on spool

• Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

OFC 2 x 0,75 2 x: 49 x 0,14 Ø PVC 2 x 2,8 0,03 2,8 x 5,6 (PVC black & black/red) -10~60 °C 250V 100 m on spool

NEW PRODUCT

SPE-225 Length

D9103 D9103500

Speakercable 2 x 2,5 mm, 100 m on spool Speakercable 2 x 2,5 mm, 500 m on spool

OFC 2 x 2,5 2 x 7 x 24 x 0,14 Ø PVC 2 x 4 0,01 4 x 8 (PVC black & black/red) -10~60 °C 250V 100 m on spool

SPE-240 Speaker Cable Length

D9104 D9104500

100m spool 500m spool

Conductor drains Ø mm: Conductor construction strands: Conductor insulation Ø in mm: Conductor resistance Ohm/m: Outer insulation: Working temperature min. / max.: Voltage overflash: Minimum order length:

276

NEW PRODUCT 2x4.0mm2 2x7/50/0.12mm

0.006Ohm PVC 2xØ4.5 mm -10~60°C 250V 100M on spool

Speakercables

[Cables on spool]

Speakercables Cab able less on spo le pool ol SPK-275 Stage Speakercable 2 x 0,75 mm, 100 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

SPK-215 Stage Speakercable 2 x 1,5 mm, 100 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9205

OFC 2 x 4 2 x 7 x 50 x 0,12 Ø PE 0,006 PVC 10 mm Ø matte blue -10~60 °C 250V 50 m on spool

SPC-240 Speakercable, 50 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage over-flash: • Minimum order length:

D9204

OFC 2 x 2,5 2 x 7 x 30 x 0,12 Ø PE 0,01 PVC 9 mm Ø matte blue -10~60 °C 250V 100 m on spool

SPK-240 Stage Speakercable 2 x 4 mm, 50 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9203

OFC 2 x 2,5 2 x 7 x 30 x 0,14 Ø PE 0,01 PVC 7,7 mm Ø matte blue -10~60 °C 250V 100 m on spool

SPK-225 Stage Speakercable 2 x 2,5 mm, 100 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9202

OFC 2 x 1,5 2 x 7 x 20 x 0,12 Ø PE 0,014 PVC 8 mm Ø matte blue -10~60 °C 250V 100 m on spool

SPC-225 Stage Speakercable 2 x 2,5 mm, 100 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9201

OFC 2 x 0,75 2 x 49 x 0,14 Ø PE 0,03 PVC 6,5 mm Ø matte blue -10~60 °C 250V 100m on spool

D9206

OFC 2 x 4 2 x 7 x 50 x 0,12 Ø 8,5 PE 0,006 PVC 9,5 mm Ø matte grey -10 ~ 60 °C 250V 50 m on spool

Speakercables 01_09_10_DAP_Cablespool_merch_10_temp2011.indd 277

[Cables on spool]

277 07.03.11 12:26

Speakercables Cab able less on spo le pool ol SPK-440 Stage Multi Speakercable 4 x 4 mm, 50 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/km: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

SPK-645 Stage Multi Speakercable 4 x 4 mm + 2 x 2,5 mm 50 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/km: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9304

OFC 8 x 2,5mm 8 x 7/ 72/ 0,08mm Ø3,2mm PE 5,1 Ohm/km PVC Ø16mm matte blue -10~60 °C <= 250V 500m

SPK-425 MKII Stage speakercable 4 x 2,5 mm Twist protection 50 m on spool • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/m: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9303

4 x 4 mm OFC; 2 x 2,5 mm OFC 4 x 7 /50 /0,12 Ø; 2 x 7/30/ 0,12Ø Ø4,3 mm; Ø3,4 mm PE 3,136 Ohm/km; 5,43 Ohm/km PVC Ø18 mm matte blue -10~60 °C <= 250V 50 m on spool

SPK-825 Stage Multi Speakercable 8 x 2,5 mm, price per m • Conductor drains Ø mm: • Conductor construction strands: • Conductor insulation Ø in mm: • Conductor resistance Ohm/km: • Outer insulation: • Working temperature min. / max.: • Voltage overflash: • Minimum order length:

D9302

OFC 4 x 4 4 x 7/50/ 0,12 Ø4,3 PE 3,136 Ohm/km PVC 16 mm Ø matte blue -10~60 °C <= 250V 50 m on spool

D9305

OFC 4 x 2,5 7 x 72 x 0,08 Ø PE 0,01 PVC 13 mm Ø matte blue -10 ~ 60 °C 250V 50 m on spool

278 01_09_10_DAP_Cablespool_merch_10_temp2011.indd 278

Speakercables

[Cables on spool] 07.03.11 12:26

Speakercables Cab able less on spo le pool ol

DAP Audio Shirts

Now you can order your own road-proof shirts for any occasion! If you’re a roady or just a music-fan, this T-Shirt is a “must-have”! The DAP Audio shirts are available in 2 unique and good-looking designs. (Available in the sizes; M, L, XL & XXL)

DAP T-Shirt Stagecrew Available models:

99010

Size M

99011

Size L

99012

Size XL

99013

Size XXL

Backside shown!

DAP T-Shirt Roady Available models:

99015

Size M

99016

Size L

99017

Size XL

99018

Size XXL

Backside shown!

DAP/Showtec t-shirt Available models:

DAP Cap 99101

99020

Size M

99021

Size L

99022

Size XL

99023

Size XXL

Frontside shown!

Security-jacket

DAP Sweater

Available models:

Size M

99050

“Security”, Yellow

99046

Size L

99051

“Crew”, Orange

99047

Size XL

99048

Size XXL

99045

Backside shown!

Speakercables 01_09_10_DAP_Cablespool_merch_10_temp2011.indd 279

Backside shown!

[Cables on spool]

279 07.03.11 12:26