Do you really need Teflon Coating for Car? When you get a new car, the very first service that the car owner gets from any car dealer is a Teflon paint sealant, polish and an underbody rust preventive coating for car care. A small step towards car coating can add longer durability to your car life. Teflon coating is a clear car coating paint sealant which is applied to the car’s painted surface. it is the brand which has now turned generic to PTFE paint sealant category. This adds protection to the car painted surface for offering brilliant shine and restoring the lost shine of your car. Most people range into hatchback segment so, they should be clear about how much getting Teflon coating for the car will cost.
PTFE car coating gives excellent non-stick properties to the surface it is professionally applied. The coating material posses the highest operating temperature and possess an extremely low friction coefficient teamed with amazing abrasion. Not just this, Teflon coating is highly resistant to any chemical. Teflon coating is a single or two-coating system, formed of primer and the topcoat. If you are searching for a premium system then three coating system is available in detailing market. This PTFE coating is actually available in the aqueous-based forms. Let’s take a look at the advantages and downsides of getting into the Teflon coating over the body and underbody. Let’s step ahead and take a look at the picture from bit close.
Underbody Teflon Coating:
The underbody Teflon coating is the most common car coating type prevailing in Indian car detailing market. There are many companies that supply thick rubberized paint forming 2-3 mm thick layer across car including underbody. You can even have a thinner layer of clear Teflon coating that is like lacquer which coats the complete car. Some of the detailers even inject the Teflon coating product in the cervices like the door sills and bottom of the door, door sills and others for protecting them off from rust. Few of the car manufacturers give few of the underbody Teflon coating straight out of the factory that is sprayed in the wheel arches and under the car’s floorboard. The average Teflon coating price prevailing in India car detailing market ranges between 3,000 to 6,000 depending on the type and segment of the car.
Benefits of Underbody Teflon Coating:
There exist multiple benefits of underbody Teflon coating and this blog from Opti Coat India brings down a few in layman’s language. Starting from;
Minor Scratch Protection: Teflon is a thick clear car coated surface which is slippery in nature. It directly protects the exterior surface of the car from any swirl marks and other scratches caused dust or forcefully cleaning it using dirty cloth.
Enhance the Glossiness of Surface: Applying a clear coating of hard wax or the Teflon coating over the car evens out any sort of unevenness formed on the car painted surface. This unevenness is removed by filling up the minor cracks and pits. This helps in enhancing the paint’s reflective capability leaving behind a high-glossy finish that is just like a mirror.
Rust Prevention: Ideally, any of the underbody car coatings need to be applied when the car is all new and tidy. Car manufacturers use the paints and sealants for underbody to add durability to the life expectancy of car metallic body. This underbody Teflon coating is important mainly in the coastal areas as salt water tends to corrode underbody part of the car very badly. Even the bad roads can be an enemy to your car. Pebbles, rock stones can surely chip off the original car underbody coating providing extra protection.
Sound Insulation: The thicker the underbody Teflon Coating, the effect it acts as sound dampeners. They can reduce the noise of tire and road and make car cabin seem quitter. This reduction in noise is all because of the sound absorptive nature of the rubberized car coating.
Easy Maintenance:
The uniform underbody Teflon Coating adds a car an amazing clean look. It even makes the car maintenance easy by simply hosing the car underside down. You can even be confident enough that the slush formed and layered won’t lead to oxidation process thus preventing it from easy rusting. Most of the underbody coating in present days turn up to the customer with a minimum of five years of warranty that is the lifetime of any of the car coating. Once done with the advantages of getting the underbody coated, here comes the turn of describing the downside of the underbody coating.
High Cost: With the passing of time, the cost of underbody coating has minimized but if compared to another form of car coating, it is still much expensive. The reason behind the expensiveness of this car coating is it is the only best way to care your car’s underbody as it adds long term durability to the body parts. Not just durability, but even further expenses of maintenance is even restricted.
Risk of damage caused during Teflon Coating application:
Care is the first thing that you need to think of before handling a car. So, car care is must when you are proceeding with the process of underbody Teflon Coating. This thick and rubberized paint can adversely affect the car body parts if it is not properly applied. It can get into the moving mechanical car parts and thus leading to premature failure. Some of the basic premature failures related car are CV joints, U-joints in the propeller shaft of a car or the drive shafts. They can even hinder the soft movement of the suspension components if the application is not correct. There is even the risk of overspray over the painted surface of the car mainly at the lower edges of the car.
If you can invest more and have more time, always prefer to go for car waxing in place of Teflon coating. tell us if you are aware of more advantages and drawbacks of applying Teflon Coating for car body by mentioning in the comment section. This can be beneficial for us while dealing with our clients and customer. For any sort of car coating, you can call us at 80-100-44000 or visit our website http://www.opticoatindia.com/.