1 minute read

After an impact or a crash

HEADSET EXPLODED PARTS AND ASSEMBLY

BEARINGS AND SIC ADAPTER

Advertisement

SEE THE LIST OF COMPONENTS AT THE END OF THIS SECTION

2

1.1

3

1.1

1.2

Starnut

Fork´s steerer tube

GREASE

"REGULAR STACK" AND "LOW STACK" HEADSET SETS (OPTIONAL)

The HS02 headset allows for two different assemblies "Regular Stack" and "Low Stack", depending on your preferred stem and handlebar height.

The "Low Stack" option can be chosen as an option at the time of purchase on select models, or can be fitted later on models with the "Regular Stack" option mounted.

REGULAR STACK

The "Regular Stack" option uses a separate frame cover (4) and SIC cabling collector (6).

The headset spacers to be used below the stem (5.1, 5.2) are mounted between the frame cover and the collector to achieve the desired stem height.

The headset spacers to be used on top of the stem (8.1, 8.2) are specific for assemblies with OC stems.

LOW STACK

The "Low Stack" option uses a specific SIC cabling harness that acts as a frame cover (9).

This collector is not compatible with the use of steering spacers below the stem (5.1, 5.2) .

The headset spacers to be used on top of the stem (8.1, 8.2) are specific for assemblies with OC stems. The "Regular Stack" and "High Stack" headsets are only compatible with the use of OC stems compatible with the Spinblock function. (see Spinblock section in this chapter).

This article is from: