How To Buy Leather Leather is sold by the square foot. Since leather is a natural material, each hide size is unique, but an average hide size can range from 40 to 48sqft. The fact that leather is irregularly shaped, there will always be a waste factor in the cutting of leather. The industry has developed a standard formula for converting fabric yardage to leather square footage which factors in the waste. The formula is that one linear yard of 54" wide fabric equals 18 square feet of leather, based on hides averaging 40 to 48sqft. It is always best to inform us if really large cut sizes will be needed, that way we can specifically pick the hides to meet your requirements. Below are basic measurements of a typical hide.
Embossed Leathers Embossed Leathers are leathers that have been stamped with steel engraved plates . At Restoration Oak, we carry the finest embossed leathers. We can sell embossed leathers in quantities as small as one hide or supply large volume. There are many issues to consider when ordering embossed leather. Below is a list of things to consider when buying embossed leather. Plate Dimensions
Rectangular plates are used to emboss the leather, ranging in size between 26"-29" high by 48"- 54" wide. (Average plate is 26" x 48".) Usually hides are cut in half with embossed leathers and sold by the half hide, But can also be sold in full hides depending on the pattern. Joint marks Joint marks are registration marks where the plating matches up. They occur every 26"-29" vertically, depending on the plate. Joint marks may be visible on some patterns. They are particularly visible in geometric and woven patterns. Direction Some patterns have a direction. Please contact us in regards to the direction of certain patterns. Custom Embossing patterns available.