Meet Your New Directors JOSHUA L. KLOSTERMANN

District 1

Josh Klostermann was appointed as the District 1 Board Director for Magic Valley Electric Cooperative in January 2023.

Mr. Klostermann graduated from Raymondville High School in 1992. He went on to attend Texas A&M University and graduated in 1996 with a degree in Agricultural Economics. After graduation, Mr. Klostermann began a career in insurance. He worked 24 years in the industry serving most of that time with Texas Insurance Managers in Harlingen, TX. He obtained the professional designation of Certified Insurance Counselor from The National Alliance for Insurance Education & Research. During his tenure, he became a partner and served as president of the company. Mr. Klostermann and his partners in the agency sold to Arthur J. Gallagher in 2017. Selling the agency allowed him to explore other opportunities. In 2021, Klostermann was able to begin farming by forming JLK Farms. JLK Farms is a row crop farming operation that produces cotton, grain sorghum, and corn. Mr. Klostermann’s family has been farming in Willacy County since the 1930s.

Mr. Klostermann is a proud father of three sons, and this year celebrated his 25th wedding anniversary with his wife Wyndi. He and Wyndi live in Raymondville and he is a longtime board member of the Willacy County Livestock Show.

Dr. David S. Morales was appointed to serve as District 2 Board Director for Magic Valley Electric Cooperative in January 2023.

Dr. Morales has lived in Brownsville, TX, since 1970. He graduated from Homer Hanna High School in 1988. He graduated from Instituto Odontológico de Matamoros in 1994 with his dental degree. He partnered with his brother and continues with their practice in Matamoros, Mexico, since graduation. Dr. Morales completed the UTSA Preceptorship in Dental Implants in 1998 and incorporated it into his general dentistry practice.

Dr. Morales is the Dean of the university, Instituto Odontológico de Matamoros, since 2002. The university not only teaches dentistry but also offers quality dental care at affordable prices for the community.

Dr. Morales served and chaired on the Brownsville Public Utilities Board, the Brownsville Charter Review Committee, the ION (dental university) Professional Exam Board, and the Mr. Amigo Association.

Dr. Morales and his wife have four children and currently reside in Brownsville, TX.

DR. DAVID S. MORALES

District 2

How Much Insulation Is Enough or Too Much?

Energy efficiency experts always say, “Seal and insulate, seal and insulate,” but occasionally, you hear stories about newer houses being too tightly insulated, with restricted flow of fresh air leading to poor indoor air quality, mold growth and other problems. So how do you know how much is too much?

Although it’s possible to seal a house too tightly, this is uncommon in most older homes. A certain amount of fresh air is needed for good indoor air quality, and there are standards that set the minimum amount of fresh air needed for a house. But most homes built before 2000 have many spots through which air enters or exits the house—usually too many.

A quick way to determine whether you have enough insulation is to check your attic. If the insulation material is level with or below the joists, you probably need to add more. If you can’t see the joists because the insulation is above them, then you probably have enough, and adding more likely will not be cost-effective.

The recommended insulation level for most attics is an R-value of 30 to 60. R-value is a measure of insulation’s ability to resist heat flow. The higher the R-value, the better the thermal performance. For more information, including recommendations for how much insulation you should have, visit energystar.gov or energy.gov.

Even if you have plenty of insulation, your home’s energy efficiency might not be optimal due to cold air leaking through other areas. Make sure to look for signs of air leaks and seal them up as you find them. Some air leaks are easy to find because they’re easy to feel, such as those around windows and doors and through electrical outlets. Hidden air leaks in attics and basements and around chimneys are often more significant sources of energy loss. Consider addressing these big leaks first because they’ll have a greater effect on improving your comfort and reducing your utility bills.

If you’re concerned about how tightly your home is insulated, hire an energy specialist to perform leakage tests using diagnostic tools and ensure that all combustion appliances are operating properly. Combustion appliances include space heaters, gas ranges and ovens, furnaces, gas water heaters, gas clothes dryers, and fireplaces. If your home is too tightly sealed, the energy specialist might recommend that a fresh-air ventilation system be added to your heating and air conditioning system.