OXIMISER PRO
ADVANCED BATTERY MANAGEMENT SYSTEM
INTELLIGENT CHARGING
OXIMISER PRO
Oxford has been designing market-leading OXIMISER battery optimisers for over 20 years.
Having launched our first battery optimiser over two decades ago, we understand the importance of ‘user-centric’ design, our new Oximiser Pro range has been engineered to take ‘intelligent’ battery optimisers to another level.
Equipped with sophisticated diagnostic capabilities, the Oximiser Pro seamlessly detects and rehabilitates damaged batteries, utilising cutting-edge, proprietary charging profiles to restore multiple battery types.
Requiring no prior technical expertise, this advanced system has been designed to ensure optimal performance for any battery type, with plug-and-play automated functions.
Its intelligent monitoring system continuously oversees the battery’s condition, providing long-term maintenance and significantly extending the battery lifespan.
INTELLIGENT CHARGING
DESIGNED FOR MULTIPLE BATTERY TYPES
6V & 12V options for WET/MF, AGM, GEL and 12V LiFePO4 batteries
WEATHERPROOF BODY
IP65 Rated allowing the Oximiser Pro to be used in any environment.
BACK-LIT LCD DISPLAY
The Oximiser uses a back-lit LCD Display to clearly display the easy-to-read relevant charge data in any light condition whilst remaining low in power consumption.
MULTIPLE IN-BUILT SAFETY SYSTEMS
For complete peace of mind when attached permanently.
WATERPROOF CABLE EXIT WITH CABLE STRAIN RELIEF WINTER GRADE CABLE
REMOVABLE HANGER
Easy to use, clip in and turn to hold the hanger in place. Allowing the charger to be lifted off the ground.
MOUNTING POINTS
Allows the charger to be wall mounted to keep the Oximiser off the ground during charging. 2 x 4.5mm Diameter holes.
RUBBER FEET
Rear fitted rubber feet for increased ventilation around the Oximiser casing.
MULTI STAGE AUTOMATIC CHARGING
USING AN INTELLIGENT 8-STAGE AUTOMATIC PROGRAM ENSURES THAT THE BATTERY IS CORRECTLY AND SAFELY CHARGED TO THE OPTIMUM VOLTAGE BEFORE SWITCHING INTO MAINTAIN MODE – EXTENDING THE LIFE OF THE BATTERY.
1. POLARITY TEST:
Upon connection to the battery a polarity check is made to ensure that the polarity is correct. The digital (LCD) display will show a flashing battery warning sign if the connection polarity is incorrect.
2. ANALYSE:
The Oximiser will analyse the initial voltage to determine what charge rate should be applied to ensure a safe/ efficient charge.
3. DESULFATION:
Repairs damaged batteries automatically during the charging profile, bringing them back to life (Not LiFePO4). (1250, 2000, 5000 MODELS ONLY)
4. SOFT START MODE:
To reduce shock to the battery the Oximiser will start by applying a low current, this is used to protect the battery and optimise the bulk charging.
5. BULK MODE:
Once safe to do so, the Oximiser will then supply a constant current of 5.0 Amps until the battery is 80-90% recharged.
6. ABSORPTION MODE:
The charge current will start to drop off when the charge program is nearing 80-90% complete, the charging Amps will continue to drop until the voltage of the battery has reached the desired completion voltage.
7. VOLTAGE CHECK:
After the charging program has been completed, the Oximiser will cut charge and observe the battery to ensure the voltage of the battery is stable.
8. MAINTAIN MODE:
This will be shown by a solid 100% charged diagram, the Amps will then drop to maintain a set float voltage.
ADVANCED BATTERY MANAGEMENT SYSTEM
ADVANCED BATTERY MANAGEMENT SYSTEM
The Oximiser Pro 5000 will charge a range of 12V batteries at a max charge rate of 5000mA (5 Amps). FOR USE WITH:
EL204EU Oximiser Pro 5000 - EU
CROC-O-RING
CROCODILE/RING LEAD SAE CONNECTOR
· Heavy duty all-weather cable
Dual connector
· Crocodile clips with integrated M6 ring leads
Connects to any battery charger via SAE connector
· 18AWG all-weather wiring loom, 0.5m Length
Supplied with 3 micro blade fuses to work with Oximiser Pro battery optimisers:
BATTERY MONITOR
12V BATTERY MONITOR/SAE CONNECTOR
The easy-to-read battery charger uses a M6 ring connector to connect to the Lead acid battery. The Traffic light system they allow the user to easily tell if the battery is healthy or requires charging. The SAE connector then allows through charging, reducing the need for another permanent battery charger cable on the battery.
Supplied with 3 different fuses to work with every charger in the Oximiser Pro range (7.5A / 4A / 2A). Made from high quality 18AWG Cable.
· Allows the health of a battery to be determined with an easy to read traffic light system:
• Green WEAK = >12.6V
• Yellow CHARGE = 12.2V - 12.6V
• Red STRONG = <12.2V
· Flashes every 5 seconds to reduce power consumption
· Can be used in conjunction with Oximiser Pro optimiser range, using the supplied micro blade fuses: 900/1250 = 2A2000 = 4.0A 5000 = 7.5A
Connects to SAE connectors
· Dimensions: 0.5m length, 18AWG cabling
· To be used with 12V Lead Acid batteries (not Lithium)
OXIMISER PRO RANGE
COMPATABILITY WET/MF AGM GEL
LIFEP04 (12V
FEATURES REMOVABLE HANGER
WEATHERPROOF BODY
LCD DISPLAY
RUBBER FEET
MOUNTING POINTS
WATERPROOF CABLE EXIT
WINTER GRADE CABLE
AUTOMATIC CHARGING STAGES POLARITY TEST ANALISE
DESULFATION
SOFT START MODE
BULK MODE
ABSORPTION MODE
VOLTAGE CHECK
MAINTAIN MODE FOR USE WITH SCOOTERS
BIKES
CARS VANS / CAMPERS
