Installation Instructions, 1-1/2" Hex Cap Nuts Dome Cap Nuts 1" Hex Cap Nuts
56621 & 86621 1-1/2" Hex Cap Nuts
56622 & 86622 Dome Cap Nuts
56681 & 86681 1" Hex Cap Nuts
All Cap Nuts function the same Hex Cap Nuts are standard on most products. Dome Cap Nuts are standard on hinges. Either are suitable in place of one another plus a variety of other uses. Increased holding power of fasteners with additional surface area. Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
1
Suggested Tools (others may be required)
Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
3
Recommneded Fastener: OWT Timber Screws
use this end on cap
use this end on Timber Screw step 2 securing Cap
Tool required 3/8" Driver (not included)
finger tight
step 1 securing fastener (not included)
1-1/2" Hex Cap Nut Installation Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
4
Recommneded Fastener: #8x1" (phillips head shown)
Cap (finger tight) 4mm Hex step 2 securing Cap
Tool required 1/4" Driver (not included)
finger tight
step 1 securing fastener (not included)
1" Hex Cap Nut Installation Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
5
Recommneded Fastener: OWT Timber Screws
use this end on Timber Screw Tool required 3/8" Driver (not included) step 2 securing Cap finger tight
step 1 securing fastener (not included)
Dome Cap Nut Installation Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
6
Dome Cap Nut Lightly tap with RUBBER mallet, then remove with fingers
Hex Cap Nut (both sizes) Apply lubricant, then remove with driver
use this end on cap driver
Disassembly Method...if difficult Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/5/2016 . This information is updated periodically and should not be relied upon after 2 years from 10/5/2016 . Please visit OZCOBP.com to get current information.
7