Installation Instructions, 4x4 Post Anchor Kit (4x4-OPAK-LS) (56632) 6x6 Post Anchor Kit (6x6-OPAK-LS) (56633) 8x8 Post Anchor Kit (8x8-OPAK-LS) (56634)
All sizes of Ornamental Post Anchors will be installed the same. Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
1
Choose your installation method Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
3
optional accessory for extra stability #50880
50880 shown with customer applied black finish. suggest spray can truck bedliner
50880 accessory Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
4
post level #50740 (sold separately) not installed while driving
sledge hammer (not included)
scrap piece install plates and screws
check angle every 1"
repeat
until 1/2 way 56632 shown
sledge hammer Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
5
jack hammer (rental)
post level #50740 (sold separately) not installed while driving
JDK #20480 (sold separately)
check angle every 1"
repeat 56632 shown
until 1/2 way
JDK Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
6
post level #50740 (sold separately) not installed while driving
upper section slides up & down to drive post anchor
MDK #20500 (sold separately)
check angle every 1"
repeat 56632 shown
until 1/2 way
MDK Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
7
= = = =
post
soil & grass
56632 shown
Post alignment Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
8
Typical Installation & Basic Assembly Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
9
Typical Installation & Basic Assembly Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
10
Typical Installation & Basic Assembly Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
11
38.10 1.50 additional instructions • center post as shown in previous steps • install 1 compression plate with fasteners • remove, reposition & reinstall post/compression plate as shown with plate facing wall • complete assembly as shown
step 1
base mounting
step 2
this procedure applies to all OZCO Post Bases & Post Anchors utilizing compression plates (56607 shown)
step 3
step 4
Special Instructions-mounting next to wall Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
12
Idea's Installation Instructions, 56632-34
V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.
13