OZCO Project #210 - Wood Post & Beam Pavilion Free Standing
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
1
12'0" 11'7"
11'0"
7 9'11 8 "
10'0" 11 8' 16 "
1 9'4 8 "
Center to Center
13 9 7'2 16 " 11'9 16 "
11 11' 16 "
1 9' 2 "
Center to Center
Overview OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
3
Translucent OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
4
9
5
4 3
8
ITEM NO.
QTY.
PART NUMBER
1
4
56609
2
4
56636
3
4 12
56612 56611
2
56625
10 13
4
5
56618
5
4 10
56619 56611
2
56625
15
14
6
8
56651
7
1
56622
-
56625
16 11 6 2 1
Bill of Material OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
7
8
28
9
1
10
4
11
1
12
10
13
2
14
2
15
2
16
4
1x6 Cedar Board 2x8 Cedar Board 4x6 Cedar Board 4x10 Cedar Board 4x6 Cedar Board 4x6 Cedar Board 4x10 Cedar Board 4x10 Cedar Board 8x8 Cedar Post
DESCRIPTION 8x8 Post Base (8x8-PBLS) Post to Beam Bolt Offset (P2B-BO-LS) "T" Tie Plate (TTP) Truss Accent (TA-LS) Screw, OWT 1-3/4" (45mm) Timber 4" Standard Rafter Clips (RC-LS-4) Truss Base Fan 8:12 Truss Accent (TA-LS) Screw, OWT 1-3/4" (45mm) Timber OWT Timber Bolt 8-10" 1-1/4" Hammered Dome Cap (DCN) OWT Timber Screw 13/4" 1x6x11'0" 2x8x12'0" 4x6x3'0" 4x10x8'4 1/2" 4x6x7'0" 4x6x3'1" 4x10x12'0" 4x10x9'4 1/4" 8x8x8'0"
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
5
QTY.
PART NUMBER
4
56609
8x8 Post Base (8x8-PB-LS)
2 4 22 4 5 2 4 8 1
56636 56612 56611 56625 56618 56636 56619 56651 56622
Post to Beam Bolt Offset (P2B-BO-LS) "T" Tie Plate (TTP) Truss Accent (TA-LS) OWT Timber Screw 1-3/4" 4" Standard Rafter Clip (RC-LS-4) Post to Beam Bolt Offset (P2B-BO-LS) Truss Base Fan 8:12 OWT Timber Bolt 8-10" 1-1/4" Hammered Dome Cap Nut
28 1 1 3 11 2 4
1x6x12L 2x8x12L 4x6x12L 4x10x10L 4x6x8L 4x10x12L 8x8x8L
DESCRIPTION
1x6x12 2x8x12 4x6x12 4x10x10 4x6x8 4x10x12 8x8x8
Material List OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/12/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/12/2018 . Please visit OZCOBP.com to get current information.
6
56609
56611
56636
56619
56618
56625
56651
56622
56612
OZCO OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
6
Laredo Sunset & Ironwood 2 great styles Same functionality choose your connection lifestyle both styles available for most products Laredo Sunset (566XX series)
Laredo Sunset & Ironwood
Ironwood (517XX series)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
7
Suggested Tools (others may be required)
OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
8
8'0" 2" typ 2 sides
8x8 Cedar Post 2 dato cuts
2"
beam width
4x10 Cedar Board Bar
1 8'4 2 "
1" X 45°
Cutlist1 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
9
4X6 Cedar Board King Post
56째
3'1"
56째 7 18"
3 1 16 " 4X6x12 Cedar Board; Web
9 2'5 16 "
34째
56째 13 16 "
Cutlist2 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
10
56° 3 28" 56°
56°
4X6 Cedar Board Rafter
11 7 16 " 7 6'10 8 "
Cutlist3 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
11
[3658] 144" 4x10 Cedar Board Beam
15 4 16 " X 45°
[3658] 144" 2x8 Cedar Board Top Beam
Cutlist4 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
12
1 9'4 8 "
13'0"
Locate desired center of structure
13'0"
1 9' 2 "
if site is not level, see Ozco Site Leveling instruction site plan OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
13
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 1 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
14
flush
width of beam
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 2 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
15
flush
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 3 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
16
=
=
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 4 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
17
CL
king post rafter
61" 4 51" 2
web
step 5 Truss Overview OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
18
king post
CL
line up with centerline of beam
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 6 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
19
(HCN) provided Tool Required 3/8" Driver
1-7/8 to 2" use scrap wood to set gap
Rafter
(OWT Timber Screw) provided
step 7 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
20
Web
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 8 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
21
repeat connectors on inside of Pavilion (both ends) repeat Truss on opposite end
step 9 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
22
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
=
=
step 10 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
23
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided 2'6"
CL
step 11 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
24
secure with nails or screws
for additional roofing, see OZCO Project #339 - 10x10 Pavillion Roofing
step 12 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
25
inside view 3 remaining Dome Cap Nuts
(HCN) provided Tool Required 3/8" Driver
(OWT Timber Screw) provided
step 13 OZCO Project #210 - Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/16/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/16/2017 . Please visit OZCOBP.com to get current information.
26