OZCO Project #218 – Cabana & Covered Patio Area

Page 1

OZCO Project #218 - Cabana & Covered Patio Area

Roofing & Paneling shown translucent

OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

1



11 ~14'9 16 "

7 12'4 16 "

11 8' 16 "

12'2"

Overview-Front OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

3


CL

1 5'8 4 "

CL

19'11"

1'4" typ

Overview-Top OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

4


9" or =

9" or =

1 5'8 4 "

1 18' 4 "

Overview-Side OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

5


?

7

ITEM QTY. NO. 1 6

9

2

6

12

10

11

4

56643

10

56611

3

2 8 16

56625 56615 56611

4

2 7 21

56625 56612 56611

3

56625

15

13 3

4

14

5

6

56618

6

2

56648

7

2

8

2

9 1

10 11 12 13

8

Bill of Material OZCO Project #218 - Cabana & Covered Patio Area

PART NUMBER 56608

14 15

56629 Cedar 6 6x6Post Cedar 1 6x10 Board Cedar 2 4x8 Board Cedar 3 4x8 Board Cedar 4 4x8 Board Cedar 4 4x8 Board Cedar 2 4x6 Board Cedar 26 2x8 Board

DESCRIPTION 6x6 Post Base Kit (6X6-PB-LS) Truss Base Fan 6:12 Truss Accent (TALS) OWT Timber Screw 1-3/4" Flush Inside 90 Truss Accent (TALS) OWT Timber Screw 1-3/4" "T" Tie Plate (TTP) Truss Accent (TALS) OWT Timber Screw 1-3/4" 4" Standard Rafter Clips (RCLS-4) OWT Timber Screw 12" OWT Timber Screw 7-1/2" 6x6x8'0" 6x10x240.000 4x8x20'0" 4x8x12'0" 4x8x2'7 1/2" 4x8x8'0" 4x6x2'10" 2x8x8'0"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

6


QTY. 6 4 47 10 8 7 6 2 2

PART NUMBER 56608 56643 56611 56625 56615 56612 56618 56648 56629

6 1 2 4 4 2 26

6x6x8L 6x10x20L 4x8x20L 4x8x12L 4x8x8L 4x6x6L 2x8x8L

DESCRIPTION 6x6 Post Base Kit (6X6-PB-LS) Truss Base Fan 6:12 Truss Accent (TA-LS) OWT Timber Screw 1-3/4" Flush Inside 90 "T" Tie Plate (TTP) 4" Standard Rafter Clip (RC-LS-4) OWT Timber Screw 12" OWT Timber Screw 7-1/2" 6x6x8 6x10x20 4x8x20 4x8x12 4x8x8 4x6x6 2x8x8

Material List OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/12/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/12/2018 . Please visit OZCOBP.com to get current information.

7


56611

56643 56608

56612

56625

56629

56648

56618

56615

OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

7


Laredo Sunset & Ironwood 2 great styles Same functionality choose your connection lifestyle both styles available for most products Laredo Sunset (566XX series)

Laredo Sunset & Ironwood

Ironwood (517XX series)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

8


Suggested Tools (others may be required) OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

22


8'0" 1 7'8 8 "

for addtional cut instruction, see document "56643 Truss Base Fan Calculator"

rafter king post

2'10"

rafter

11 2'3 16 "

web post

9 10 16 "

web post

1 2'4 2 "

63°

9 2 16 "

5 1 16 " 63°

for addtional cut instruction, see document "Truss Base Fan King & Web Post "

3 12'7 4 "

Cutlist OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

10


15 21'8 16 "

3 13'5 16 "

Locate desired center of structure

12'2"

1 18' 4 "

1 5'8 4 "

if site is not level, see Ozco Site Leveling instruction OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

11


(HCN) Tool Required 3/8" Driver

(OWT Timber Screw)

step 1 OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

12


see overview page for overhang guidance (both sides)

(HCN) Tool Required 3/8" Driver

(OWT Timber Screw)

step 2 OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

13


(HCN) Tool Required 3/8" Driver

(OWT Timber Screw)

step 3 OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

14


install on centerline of beam and rafter

rafter beam repeat step on both ends

(HCN) Tool Required 3/8" Driver connectors repeat on both sides of Truss

step 4 OZCO Project #218 - Cabana & Covered Patio Area

(OWT Timber Screw) V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

15


install on centerline of beam and rafter

beam repeat step on both ends

rafter

~2

(HCN) Tool Required 3/8" Driver

see overview pages for spacing

connectors repeat on both sides of beam

step 5 OZCO Project #218 - Cabana & Covered Patio Area

(OWT Timber Screw) V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

16


rafter

install on centerline of beam and rafter

beam

beam rafter

install on centerline of beam and rafter CL 1'4" typ (HCN)

CL

Tool Required 3/8" Driver

repeat rafter installation (OWT Timber Screw)

step 6 OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

17


Cabana (shown translucent and without structure for clarity) OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

18


7

6

3

8 12 5 2 4 9

ITEM Cabana PART NO. only/QTY. NUMBER DESCRIPTION 2x4 1 1 2x4x8'4" Board 2x4 2 28 2x4x8'0" Board 2x4 2x4x11'6 3 3 Board 1/2" 2x4 2x4x8'1 4 2 Board 1/2" 2x4 2x4x2'11 5 2 Board 7/16" 2x4 6 4 2x4x4'0" Board 2x4 7 4 2x4x5' 3/4" Board 2x4 8 8 2x4x3'0" Board 2x4 9 2 2x4x2'8" Board 2x10 10 1 Cedar 2x10x4'0" Board DOOR 11 1 SET Window, 12 2 Vinyl Cabana is built between structure posts (not shown)

11 10

1

OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

19


shelf 1 ~11'6 2 "

4'0" 1 3'7 8 " 7 2'11 16 "

pre-hung door 3 3'7 8 "

your choice of siding

shelf height

1 3'5 2 "

note double board locations

OZCO Project #218 - Cabana & Covered Patio Area

8'3"

1 7' 4 " door opening per manufacturers recommendation

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

20


3 ~5' 4 " window opening per manufacturers recommendation your choice of siding

3'0" 4'0"

window

8'3"

1 3' 2 "

note double board locations both sides of Cabana are the same

OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

21


your choice of siding

8'3"

1 ~11'6 2 "

18" centers OZCO Project #218 - Cabana & Covered Patio Area

V2.00 - Installation Instructions, Specifications and Project Plans are effective 2/10/2017 . This information is updated periodically and should not be relied upon after 2 years from 2/10/2017 . Please visit OZCOBP.com to get current information.

22


Ian's Concept 2x Stagger

2x Sandwich

4x

4x Beam Installation • 3 style choices • When 4x lumber not available or cost effective • see subsequent pages for details on each style see product installation instructions for hardware installation Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

1


polyurethane adhesive, clamp & nail no post cuts

3" nail as desired

2x Stagger Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

2


polyurethane adhesive, clamp & nail

nail as desired X Y

dato cut (2 sides)

Y

X - 1.75�

2x Sandwich Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

3


X Y

dato cut (2 sides)

Y

X – 1.75�

4x Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

4


multiple cuts approximately 1/4" apart to mark

mark ledge location

Y

pencil

remove pieces

set saw cut depth; start cuts 1/4" from top

Dato cut details Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

5


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.