OZCO Project #280 - Pergola with Overhang
OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
1
1 18'7 4 "
13 9'2 16 "
7 10'10 16 "
1 15'6 4 "
Overview-Front OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
3
7 18'7 8 " 18'0"
1'4" typ 8" typ
20'0"
10" 1 11 2 " 4x 1'4"
Overview-Top OZCO Project #280 - Pergola with Overhang
1'2" V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
4
1'6" 3'6" 5'6"
1 13'8 4 "
Overview-Right OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
5
5
2
3
11
15
13
10
9
6 8
4
7
14 17
ITEM PART NUMBER NO. QTY. 1 4 10x10 Cedar Post 2 5 4x10 Cedar Board 3 20 4x8 Cedar Board 4 9 4x8 Cedar Board 5 2 4x8 Cedar Board 6 2 4x8 Cedar Board 7 1 2x6 Cedar Board 8 1 2x6 Cedar Board 9 1 2x6 Cedar Board 10 1 2x6 Cedar Board 11 10 2x6 Cedar Board 12
4
56605
13
8
56652
4
56680
14
5
56618
15
6
56669
16
3
56617
17
2
56636
18
2
56636
18 1
18
12
Bill of Material OZCO Project #280 - Pergola with Overhang
DESCRIPTION 10x10x10'0" 4x10x16'0" 4x8x2'6" 4x8x20'0" 4x8x18'0" 4x8x3'6" 2x6x12'0" 2x6x14'0" 2x6x16'0" 2x6x17'0" 2x6x18'0" 10x10 Post Base (10x10PB-LS) OWT Timber Bolt 10-12" 2" Timber Bolt Heavy Duty Washer (OWT-TBW-2) 4" Standard Rafter Clips (RC-LS-4) 6-8" JOIST HANGER FLUSH 2" Standard Rafter Clip (RC-LS-2) Post to Beam Bolt Offset (P2B-BO-LS) Post to Beam Bolt Offset (P2B-BO-LS)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
6
QTY. 4 4 8 4 5 6 3
PART NUMBER 56605 56636 56652 56680 56618 56669 56617
4 5 22 9 2 1 1 1 11
10x10x10L 4x10X16L 4x8X16L 4x8X20L 4x8X18L 2x6X12L 2x6X14L 2x6X16L 2x6X18L
DESCRIPTION 10x10 Post Base (10x10-PB-LS) Post to Beam Bolt Offset (P2B-BO-LS) OWT Timber Bolt 10-12" 2" Timber Bolt Heav y Duty Washer (OWT-TBW-2) 4" Standard Rafter Clip (RC-LS-4) 6-8" JOIST HANGER FLUSH 2" Standard Rafter Clip (RC-LS-2) 10x10x10 4x10X16 4x8x16 4x8x20 4x8x18 2x6x12 2x6x14 2x6x16 2x6x18
Material List OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
7
56617
56618 56605
56636
56652
OZCO Project #280 - Pergola with Overhang
56669
56680
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
8
Suggested Tools (others may be required) OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
9
2" dado cut posts as shown 2x10 width 2"
Cap (finger tight) Tool Required 3/8" Driver
OWT Timber Screw
see Overview page for spacing
step 1 OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
10
Cap (finger tight) Tool Required 3/8" Driver
OWT Timber Screw
Cap (finger tight) Tool Required 3/8" Driver
(Timber Bolt)
see Overview page for spacing
step 2 OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
11
see Overview page for spacing
Cap (finger tight) Tool Required 3/8" Driver
OWT Timber Screw
step 3 OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
12
Angled Rafter 45 cut secure this end as desired flush
Cap (finger tight) Tool Required 3/8" Driver
OWT Timber Screw see Overview page for spacing
step 4 OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
13
see Overview page for spacing
Tool Required 1/4" Driver
Screw
step 5 OZCO Project #280 - Pergola with Overhang
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/21/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/21/2018 . Please visit OZCOBP.com to get current information.
14