Boiler Water Treatment Chemicals
PRODUCT
CATALOGUE PT. Panji Laborta Chemindo Epicentrum Walk Office Suite A529 Jalan HR. Rasuna Said 5th floor Jakarta Selatan 12940
Pretreatment Boiler Feed Water Control B422 ClearChem B-450 FlocChem B-455
Boiler Treatment Chemical TreatChem-B444 AlkChem-B470 ScaleChem-B500 ScaleChem -B477 OxyChem-B600 CorrChem-B605 Antifoam-B200 Condens-B222 DesChem-B255 SABER Combustion Catalyst SCC-B401 SCC-B402 Cooling Water Treatment BacChem-N460 BacChem-Ox445 CorrChem-CW415 CorrChem-CS405 OxyChem-CW430 ScaleChem-CW433
CONTROL -B422 pH Adjuster CONTROL-B422 is a chemical compound for increasing pH of general water treatment system.. Benefits
Ready to use solution. It is fast acting. Efficient in treating all applications requiring pH adjustment Convenient liquid formula Regenerates anionic resins in deionization plants CONTROL-B422 will not interfere with other chemicals use in the treatment program.
Application
CONTROL –B422 can be added in to the water treatment system by using a chemical pump or manual dripping. The amount needed 5005000 ppm or depends on the pH increasing required. Periodic pH measurement of the system water can be used to determine the amount of CONTROL-B422 needed to reach the desired pH or alkalinity. Packaging Pail @ 25 liter .
ClearChem-B450 Water Clarifier Coagulant Type ClearChem-B450 is a water clarifier coagulant type that is formulated specially to meet the conditions of a specific water type. It is a result of extensive, on site, jar test using fresh field water sample and operating conditions of that the field / location. Eonchemicals has various types of coagulant products to purify water. Equal this product as TREAT CL 2010, 2009, 2013, etc
Benefits ClearChem-B450 is formulated to coagulate the particle that is present in the discharge water. The coagulated particle will fall to the bottom, to produce clean water. Using ClearChem-B450 , optimum water clarifier is achieved at the current process conditions. The water produced will have a solid content and low turbidity. To get the best/complete separation, coagulant aid can also be combined with the water clarifier chemical types Flocculants aid. Coagulant powder can dilute to 1%, or 10 kg coagulant diluted in 1000 Liter fresh water.
Application ClearChem-B450 (as liquid 1% ) should be injected continuously into the flowing water. Possible injection points are: intake feed water pump or inlet separation tank. The injection rate is about 1000 - 5000 ppm base on raw of water (as 1%). The actual dosage should be optimizing in the field by jar test. Be careful of over treatment.
Packaging Pail @ 20 Kg (powder) .
FlocChem-B455 Water Clarifier Flocculants Type FlocChem-B455 is a Water Clarifier that is formulated specially to meet the conditions of a specific water typical. Benefits FlocChem-B455 is formulated to flocculated the particle that is present in the discharge water. The flocculated particle will rise to the top, after that the flocculated will drop to the bottom, to produce clean water. Using FlocChem-B455 , optimum oil or TSS removal is achieved at the current process conditions. The water that is discharged would have a low TSS content and turbidity. FlocChem-B455 is compatible with Coagulant aid and other treating chemicals.
Application FlocChem-B455 should be injected continuously into the flowing water. Possible injection points are: water leg of the separators or intake Tank. The injection rate is about 10-20 ppm (from the main concentration 1000 ppm) base on produce water. The actual dosage should be optimized in the field.
Packaging Pail @ 25 Liter .
TreatChem -B444 Multi Purpose Chemical TreatChem-B444 is a chemical that is specifically formulated to prevent problems that often arise in the boiler s scale, corrosion and carry-over. With oxygen scavenger, anti scale and pH / alkalinity booster contained, making TreatChem-B444 can work effectively in the boiler system. Benefits
Multi function Treatment chemical for boiler. Combine products to Inhibit scale formation , deposition, corrosion inhibitor and oxygen scavenger in boiler system Effectively disperse scale and deposit in boiler system and protect corrosion problems in boiler. Boiler system water quality will be achieved and maintained properly. Small risk of wrong dosage. Suitable for boilers with little pressure to moderate.
Application TreatChem-B444 is injected continuously into the boiler feed water on deaerator tank. Injected dose of about 30-40 ppm based on the water quality of bait used. Actual dosage must be controlled by regular analysis of the boiler water system so that the dose injected as needed.
Packaging Pail @ 25 liter
AlkChem-B470 Alkalinity Control AlkChem-B470 is a concentrated alkaline liquid. It is used to adjust boiler water P.Alkalinity and pH. Used in conjunction with ScaleChem, AlkChem-B470 prevents the formation of scale deposits. Application Benefits Economical AlkChem-B470 is economical. Usage is by dilution with 4 parts to 10 parts of water. Adjust P-Alkalinity and pH AlkChem-B470 can adjust P-Alkalinity and pH in boiler water.
Dosage, Testing and Control : The boiler water daily alkalinity and or pH test result determines the necessary dosage. For detail on testing procedures, refer to the appropriate control and dosage chart or contact your local Eonchemicals representatives. Feed Point : Dose alone or with ScaleChem B-477 phosphate boiler water treatment by diluting with condensate and feed directly to the steam drum (below water level) using a bypass pot feeder. For low pressure boilers, AlkChem-B470 liquid may be dosed to the hot well or condensate return tank, Packaging Pail @ 25 liter
ScaleChem -B500 Scale Inhibitor for Boiler Treatment ScaleChem-B500 is a phosphonate base scale inhibitor designed for low to medium pressure boilers up to 600 psig. ScaleChem-B500 is a complete internal treatment product containing dispersant, sludge conditioner and sequestrant. Benefits Complete line of polyacrylic acids and polycarboxylates type polymers effective in boiler system. Inhibit scale formation and deposition in boiler system Effectively disperse scale and deposit in boiler system It is recommended for use in boilers having zeolite softened or low hardness feed water. Proper use of ScaleChem-B500 will result in clean boilers.
Application Dosage, Testing and Control : The boiler water daily alkalinity and or pH test result determines the necessary dosage. For detail on testing procedures, refer to the appropriate control and dosage chart. Feed Point : Dose alone or with HARDNESS B505 phosphate boiler water treatment by diluting with condensate and feed directly to the steam drum (below water level) using a bypass pot feeder. For low pressure boilers, ScaleChemB500 liquid may be dosed to the hotwell or condensate return tank, Packaging Pail @ 25 liter
ScaleChem-B477 Scale Phosphate Boiler ScaleChem-B477 is a phosphate base scale inhibitor designed for low to medium pressure boilers up to 600 psig. ScaleChem-B477 is a complete internal treatment product containing dispersant, sludge conditioner and sequestrant.
Benefit ScaleChem-B477 is very effective in preventing and dispersing carbonate and sulphate scales. It is recommended for use in boilers having zeolite softened or low hardness feed water. Proper use of ScaleChem-B477 will result in clean boilers.
Application Under normal conditions, the required residual concentration of ScaleChem-B477 in the boiler water will be 20-50 ppm. The correct dosage will vary depending on the calcium hardness content of the feed water.
An approximate dosage can be calculate as follows:
P = (Ca x 7.3) + {(R x 13) / C} Where, P = ppm of EONSCALE B5777 in the feed water Ca = calcium hardness content in the feed water R = residual of ES B5777 in the boiler water (ppm) C = cycles of concentration
Packaging Pail @ 25 Ltr
OxyChem-B600 Oxygen Scavengers for Boiler OxyChem-B600 is an oxygen scavenger specially formulated to remove oxygen from water on water treatment plant. It is suitable for use in boiler feed water treatment for low , medium or high pressure boilers. OxyChem-B600 will protect pipes boiler and steam system equipment from oxygen corrosion. Benefits Fast acting. Contains catalyst to speed up oxygen removal. Stable. Will not easy to lose activity with age. The reaction with oxygen does not add to dissolved solids in boiler water.
Application OxyChem-B600 should be fed to the storage section of the deaerator or to a point as far upstream from the boiler as possible. In application, calculate concentration of OxyChem-B600 as Sulphite content. Each part of dissolved oxygen in the water uses up one parts of sulphite. (1 ppm O2: 10 ppm sulphite ). Maintain OxyChem-B600 residual at 2 ppm as sulphite, for boiler with pressure <600 psig and ppm as sulphite for boiler with pressure >600 psig min 2 ppm. Add enough OxyChem-B600 to remove the oxygen and maintain the required residual.
Packaging Pail @ 25 liter
CorrChem-B605 Corrosion Inhibitor for Boiler CorrChem-B605 is Corrosion Inhibitor specially formulated from Hydroxylamine 30%. It is suitable for use in boiler feed water treatment for low , medium or high pressure boilers. CorrChem-B605 will protect pipes boiler and steam system equipment from pitting corrosion. Benefits Protecting metal surfaces from corrosion Effective cooper and high cooper alloy corrosion inhibitors Extensively used in Boiler water system
Application The dosage of CorrChem-B605 is directly related to the amount of bicarbonate alkalinity in the feed water. P = A x 1.15 P = ppm of CorrChem-B605 A = bicarbonate alkalinity in the feed water The amount of CorrChem-B605 needed is the ppm of CorrChem-B605 needed multiply by the amount of steam produced each day. CorrChem-B605 should be fed to maintain a pH of 8.5 - 9.0 throughout the boiler feed water. Packaging Pail @ 25 liter
Antifoam-B200 Anti-foaming or Defoaming Agents Antifoam-B200 is a high performance antifoam developed scientifically formulated for use in steam boilers. It is used to prevent boiler water carryover due to unwanted foaming and acts at the water/steam interface to control unwanted foam generation. Fast knock down action. Foam is quickly eliminated on adding antifoam agent.
Benefits Antifoam-B200 is safe and easy to use. Fast knock down action. Foam is quickly eliminated on adding Antifoam-B200. Superior quality antifoam for steam boiler systems. Reduces foam tendency and physical entrainment of boiler water in the steam.
Application Dose Antifoam-B200 at 1.5 - 3.0 ppm into the boiler feed water. Dose in proportion to the flow. Use a positive displacement chemical injection pump. Severe carryover and priming problems should be investigated. Antifoam should not be used to 'cover up' problems related to system design. Antifoam-B200 is miscible with other water treatment products. Control Measurement Control Antifoam-B200 dosage by estimating the degree of carry over by measuring the TDS of the condensate. Packaging Pail @ 25 liter
Condens-B222 Neutralizing Amines for Condensate Condens-B222 condensate corrosion inhibitor is a liquid alkaline amine used to control corrosion in condensate return lines and on steam condensing surfaces by traveling and condensing with the steam. Condens-B222 inhibitor neutralizes the corrosive effects of carbonic acid formed by carbon dioxide and maintains non-corrosive pH conditions from the point of condensation onward throughout the system. Condens-B222 corrosion inhibitor is used in our standard boiler water treatment programs for low-pressure boiler systems (0-32 bar) and medium-pressure steam propulsion vessels (32-60 bar).
Benefits Contain a Corrosion Inhibitor Condens-B222 contains a corrosion inhibitor. It will not harm metal surfaces or paints when properly diluted and applied excellent resistance against solvent, acid and alkali. Contain Wetting Agent Condens-B222 contains wetting agent to rapidly penetrate and dissolve scale.
Corrosion by CO2 in Condensate system
Aplication : Dosage, Testing and Control: Continuously dose Condens-B222 condensate corrosion inhibitor to maintain condensate pH within the specified range. The daily condensate pH test result determines the necessary dosage. Packaging Pail @ 25 L
V/L – Vapor to Liquid distribution ratio – indicates whether the species will condense with the condensate or stay with the steam
DesChem-B255 Scale Remover / Dispersant DesChem-B255 is a liquid chemical that is able to soften the crust that formed in the boiler system so that the crust will come out at the time of the blowdown. DesChem-B255 can be used when the boiler is operating.
Benefits DesChem-B255 is very effective to remove scale that sticks to boiler system. Can be used when the boiler is operating. Can work in high pressure. Does not cause corrosion on metal.
Application DesChem-B255 is injected when there is an indication of the formation of scale on the boiler system. These chemicals are injected into the system when the system is running. The amount of chemicals are injected at 20 to 50 ppm. Packaging Pail @ 25 liter .
SCC-B401 Coal Fuel Additive SABER Combustion Catalyst , SCC-B401 can improvecombustion efficiency boiler / heatproduction system and also can reduce the emission levels of the system. SCC-B401 is an additive that is also changing the morphology of the particles, can reduce ash deposits or Coating, Fouling and ash Clinkering tendency to change the eutectic structure of ash, so that the thermal efficiency can be improved. Benefit SABER Combustion Catalyst ,SCC-B401 is suitable for use in boiler and superheated that use coal fuel Entered directly into the combustion chamber and turned into gas. It reacts with sulfur oxides to form SO2. To avoid the formation of SO is easy to 3 join and water vapor into sulfuric acid. SO2 is a catalyst sodium vanadylvanadates formation. Furthermore, the formation of deposits can be avoided and the gases leaving the boiler together other flue gas.
Application Total of doses to lower slag coal ash viscosity to 250 poise in combustion temperature can be calculated from chemical analysis of coal ash. Giving initial dose is 1 kg to 2 Tons of coal solid. Furthermore, the dose of catalyst is gradually reduced to 300 gr/ton - 500 gr/ton. SABER Combustion Catalyst SCC-B401 can be administered directly into the combustion chamber or mixed through a belt conveyor and distributed in the form of gas to all parts of the flame.
Packaging Pail @ 20 Kg
SCC-B402 Solid Fuel Additive SABER Combustion Catalyst, SCC-B402 is solid chemicals that can help fuel in order to achieve combustion value so that thermal energy contained in fuel can be utilized optimally and heat transfer will run perfectly. These chemicals are suitable for solid fuels.
Benefits Thermal energy fuel will be perfectly utilized. Fuel consumption will be more efficient. Combustion is more easily cleaned. The combustion chamber will be cleaner and easier to clean. Smoke combustion products will be more environmentally friendly.
Application SCC-B402 mixed with fuels that are already in the combustion chamber and is in the process of combustion. The catalysts are sown in the combustion chamber. This catalyst will sublimate perfectly so that the gas produced provide stimulus to the fuel to achieve combustion value so that the thermal energy from fuel can be incurred perfectly. The number of chemicals that should be added the combustion process depends on the amount of fuel being used, 1 Kg of catalyst used for 3 Tons of fuel.
Packaging Pail @ 20 Kg (Powder)
BacChem-N460 Biocide Non-Oxidator for Cooling Water BacChem-N460 is high performance non-oxidizing biocides are used to control microbiological activity in cooling water industrial and process water treatment activities. They are often used in combination with oxidising biocides to provide complete system control. Benefit BacChem-N460 is a highly effective non-oxidizing, non-ionic biocide based on isothiazoline at a concentration of 0,5% and 3%. BacChem-N460 is a versatile, multiuse biocide that can be used in cooling water systems, closed systems, for sanitizing reverse osmosis systems, and peripheral equipment ahead of these systems. High performance non-foaming isothiazoline based micro-biocide for industrial cooling water systems. BacChem-N460 less Toxically, can biodegradable. Broad spectrum micro-biocide effective at lower concentrations. Effective over a wide range of pH.
Application Dosage rate for BacChem-N460 is normally around 50-100 ppm though this can vary depending on application. BacChem-N460 is normally shot fed according to the label instructions. The technical specialist servicing the facility will provide specific treatment control levels based on system conditions. BacChem-N460 is normally fed neat directly from the shipping container. Tanks, pumps, piping and valves should be made of stainless steel, polyethylene, or PVC. Packaging Pail @ 25 Liter
BacChem-Ox445 Biocide Oxidator for Cooling Water BacChem-Ox445 range of high performance sodium hypochlorite chemicals also known as "cal hypo" are available in liquid forms. These highly concentrated liquid hypochlorite products deliver up to 17% available chlorine and are used extensively in a wide range of cooling water treatment, industrial and municipal applications where their safety, quality and performance characteristics offer significant environmental, operational and financial benefits. Benefit BacChem-Ox445 sodium hypochlorite products offer a number of significant performance. BacChem-Ox445 is effective for both aerobic and anaerobic bacteria (especially SRB) and also algae. BacChem-Ox445 reduce the following type of bacteria: Desulfovibrio desulfuricans, Bacillus cereus, Pseudomonas aeroginosa, Escherichia coli, Staphylococcus aureus, Streptococcus liquefaciens, and others. BacChem-Ox445 works by attacking the protein of the microorganism.
Application BacChem-Ox445 can be using with batch treatment about 100-1500 ppm every week. Higher dosages can be applied for special types of treatment. Dosage for continuous injection is about 20-100 ppm.
Packaging Pail @ 25 Liter
.
CorrChem-CW415 Corrosion Inhibitor for Cooling Water CorrChem-CW415 is a liquid compound that provides instant protection to ferrous equipment in open-recalculating cooling water systems. The compound has an in build threshold scale inhibitor that prevents precipitation of phosphate, carbonate, and sulfate salts of calcium, magnesium and sodium. CorrChem-CW415 has an organic dispersant to the dispersant keeps suspended matter such as silt, metal oxide etc. in dispersed condition to avoid deposition in heat exchangers and allowing this to discharge through blow down Benefit Designed with all organic chemicals Complete single treatment for prevention of non-biological fouling Excellent corrosion inhibition for all metals Can retain higher levels of hardness in the water & holds blow down to a minimum No disposal problem (contains no chromate, zinc or heavy metal) Eliminates or reduces acid dosing for pH control Effective over a wide pH and temperature range
Application CorrChem-CW415 is a uniquely designed one-of-its-kind cooling water treatment chemical that is dosed on the basis of cooling capacity and/or system hold up volume of the cooling tower and feed water hardness. The normal dosage range for a fully functional cooling tower is 50-200ppm. CorrChem-CW415 is a corrosion Inhibitor can be fed directly from the container or an aqueous solution to a cooling water line, cooling tower basin or any other open evaporative system, where adequate mixing can be ensured. The dosing can be manual or through continuous injection dosing pump
Packaging Pail @ 25 Liter
CorrChem-CS405 Corrosion Inhibitor Cooling Water CorrChem-CS405 is a high performance, low toxicity molybdate based cooling water corrosion inhibitor scientifically formulated for the treatment and protection of open and closed cooling water systems containing naturally soft or artificially soft water. CorrChem-CS405 is an environmentally friendly, biodegradable scale and corrosion inhibitor that delivers superior results, protecting systems against the corrosion of steel, copper and brass, as well as containing an effective dispersant. In addition CorrChem-CS405 is stable to both chlorine and bromine at the levels normally found in cooling systems. Benefit High performance, low toxicity molybdate corrosion inhibitor Excellent corrosion control for steel, copper and brass Contains an effective dispersant Low toxicity Environmentally friendly, biodegradable Designed specifically for use in natural or artificial soft water conditions Stable to chlorine and bromine at the levels normally found in cooling systems Controls the formation of scale Compatible with most cooling water treatment products
Application CorrChem-CS405 should be dosed to give 100 - 150 ppm for open systems and 1000 - 1500 ppm for closed systems. It is important when starting up a new system or re-starting an existing open cooling system apply a dose of 300 ppm. Enhanced corrosion control can be obtained by back blending 20 - 60 ppm hardness into the system. NOTE - Always consider the cooling tower manufacturers control limits.
Testing & Control Test for molybdate. Control to 5 ppm molybdate for open systems and 100 ppm for closed systems. Packaging Pail @ 25 Liter
OxyChem-CW430 DEHA, Oxygen Scavenger OxyChem-CW430 is a light yellow clear liquid colour, when facing the air the color will turn dark and the speed will even high if under strong sunshine. it is soluble in ethyl. chloroform, benzene and other organic solvent. Stable under ordinary conditions. DEHA has weal: basic reaction with phenolphthalein, litmus; Nonwutlc, have no effect to the other product Benefit Fast acting. Can remove most of the oxygen within one minute. Stable. Will not lose activity up to 12 months if stored out of direct sunlight. Due to the low pH, the product retains its activity even if the drums are open.
Application In application, calculate concentration of OxyChem-CW430 as Sulphite content. Each part of dissolved oxygen in the water uses up one parts of sulphite. (1 ppm O2: 10 ppm sulphite ). Maintain OxyChem-CW430 residual at 2 ppm as sulphite. Add enough OxyChem-CW430 to remove the oxygen and maintain the required residual. Avoid inhalation of vapors. Wear safety goggles and gloves when handling the product. If splashes into skin or eyes, wash with plenty of water. Packaging Pail @ 25 Liter
ScaleChem-CW433 Scale Inhibitor for Cooling Water ScaleChem-CW433 is scientifically formulated using an all-organic scale inhibitors designed for the treatment and protection of high stress open re-circulating cooling systems. Scale or lime-scale is a hard, rock-like deposit of calcium or magnesium salts that forms in heat exchangers and cooling tower packing as a result of heat and increased concentration factor. Scale formation impairs heat transfer, interferes with flow and cooling, and can be a breeding ground for legionella bacteria. The scaling tendency of a water supply will depend on the hardness of the water but if not adequately treated even relatively soft waters can become highly scaling when concentrated by evaporation Benefit OxyChem-CW430 High performance cooling water scale inhibitor Cost effective concentrated blend Formulated using all-organic blend of corrosion and scale inhibitors Ideal for high stress open re-circulating cooling systems. Convenient liquid product
Application The target dosage range for ScaleChem-CW433 is 20 – 80 ppm as PO4 -3 in the re- circulating cooling water. The scaling tendency of water can be predicted by calculating the Langelier Saturation Index (LSI) or Ryznar Stability Index (RSI) to prevent scale formation whilst not causing problems of corrosion Packaging Pail @ 25 Ltr
BioChem-BD377 Bio-Dispersant for Cooling Tower BioChem-BD377 is a high performance, low foaming dispersant designed to remove and disperse organic deposits, which are biological in nature, from open recirculating cooling water systems. BioChem-BD377 is effective in dispersing microbiological slime and debris and enhancing the efficacy of oxidizing and nonoxidizing biocides. Also, by maintaining clean heat exchange surfaces, corrosion inhibitors can more readily reach the metal surface and reduce corrosion rates. Likewise, fouling caused by hydrocarbon leaks can be rapidly removed using this product. BioChem-BD377 is only recommended for open recirculating cooling water systems.
Benefit High performance low foaming dispersant open recirculating cooling water systems Excellent at dispersing microbiological slime and system debris Enhances efficacy of both oxidizing and non-oxidizing biocides Ideal for open recirculating cooling water systems
Application BioChem-BD377 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed. BioChem-BD377 is essentially noncorrosive and dosing equipment may be of mild steel, stainless steel, Teflon, polyethylene, acrylic resin or polypropylene. Dosage levels for BioChem-BD377 will be in the range of 100 ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled. Packaging Pail @ 25 Ltr