2015 Winter Specials Booklet

Page 1

2015-2016 Winter Specials


IN SHOP REPAIR BONUS

Receive 5% off Parts and Labor with a $5,000 combined Parts and Service bill! SHOP5N5

Receive 10% off Parts and Labor with a $10,000 combined Parts and Service bill! SHOP10N10

*Discount does not apply to shop supplies or freight expense. Stock order terms are available to reduce freight charges. Can only be combined with PowerPlan™ Finance offer.

WINTER BLOCK LABOR SPECIALS

Have one of our certified, trained technicians dedicated to your equipment schedule.

Schedule 40 hours and receive 5% off labor Schedule 80 hours and receive 10% off labor Schedule 120 hours and receive 15% off labor Schedule 160 hours and receive 20% off labor

CONTACT YOUR LOCAL PAPÉ MACHINERY SERVICE DEPARTMENT TO SCHEDULE YOUR INSPECTION TODAY! Any additional approved labor billed at standard rate. Qualified pricing for work performed on or before March 31, 2016. All offers end March 31, 2016.

2

Service Specials


CONTENTS

®

Papé PLUS 4 John Deere Finance

5

After Market Solutions

6

Parts 7

21 FAMILY OWNED LOCATIONS THROUGHOUT THE NORTHWEST OREGON

CALIFORNIA

WASHINGTON

JDLink 8-9

541-389-5869

559-834-4774

360-575-9959

Carter’s Corner

10

541-463-2900

Eugene

French Camp

Fluids & Filters

11

Atlas Copco

12

Morbark 13 Reman ReLife 14 Forestry / Wagner

www.papemachinery.com

15

Bend

Klamath Falls

Fowler

209-983-8122

Gilroy

541-884-5683

408-848-4150

541-772-4706

510-790-3600

Medford

Portland

503-289-1103

Tangent

541-812-0207

Newark

Redding

Kelso Kent

206-575-0140

Montesano

360-249-4114

Mount Vernon 360-424-3291

Tacoma

530-241-4555

253-922-8718

707-584-9161

509-664-1265

916-922-7181

509-248-7910

Rohnert Park Sacramento

Wenatchee

NEVADA Sparks

775-353-0440

Yakima

Visit us online at papemachinery.com

Information

3


Ground Engaging Tool A discount you can sink your teeth into... Buy any set of Teeth or Edges and receive:

PAPÉ PLUS

Papé PLUS Ultimate Uptime: Get ready for big-time uptime Give your productivity and budget a Papé PLUS. You do your part...We’ll do ours.

5% off 1 set 10% off 2 sets 15% off 3 or more

You decide what to cover and for how long, and together we calculate the hourly rate. You’ll see right away how Papé PLUS will save you money and the ability to set a fixed cost of operation. Backed by John Deere’s Worksight™ Suite of technology, let Papé Machinery be your equipment manager. Many new machines include up to 2 years and 2,500 hours of Papé PLUS included. What is Papé PLUS? It is an enhanced periodic maintenance and added value service that uses Worksight™ technologies as the tools to enable them.

*Ask about the TK Series “Free” Adapter

What are added value services? Extended Warranty is one. Service Advisor Remote, FleetCare DTC Alerts, JDLink, and FleetCare PM Alerts are all added value services.

Ask your Papé Machinery CSA about a Papé PLUS package for your equipment. Finance your extended warranty, JDLink, and Periodic Maintenance into one of our three finance offers that meet your needs. WINTGET

4

Papé PLUS


JOHN DEERE FINANCE

See Your Sales Professional For Quality Used Equipment ASK ABOUT OUR LOW RATE FINANCING!

For Rental Requests:

RL-LED

See your local sales professional OR Visit us online at paperents.com and fill out a request form.

Check out our Used Equipment at

papemachinery.com

www.papemachinery.com

PowerPlan™

5


Rubber Tracks

VALUE PARTS

Our line of rubber tracks is designed to meet the challenges of the most demanding applications and provide best in-class durability.

PAPÉ AFTERMARKET UNDERCARRIAGE

Special low price undercarriage options on major brands!

Purchase a set of rubber tracks and we’ll install them for FREE in our shop. Receive an additional 10% discount on the purchase if you do the install.

F

REE

John Deere 200 Series

$7,610

Compatible undercarriage package consists of (2) link assemblies, (18) lower rollers, (4) carrier rollers, (2) idler groups, (2) sprockets all complete with mounting hardware, and pad swap. VPI24OUC

!

L TAL S N I

Individual components are available. Contact your local Papé Machinery for additional details and take advantage soon of these special undercarriage prices!

25 OF THE MOST COMMON BACKHOE TEETH & PINS STD: $159.99

Ask Any Parts Team Member For More Information! RUBTRAK

6

PAPÉ MACHINERY UNDERCARRIAGE PACKAGES ARE FOR MORE THAN JUST DEERE AND HITACHI!

STAR: $156.99

John Deere Small Crawlers $6,135

Compatible undercarriage package consists of (2) link assemblies, (14) lower rollers, (2) carrier rollers, (2) idlers, (2) sprockets - all complete with mounting hardware, and pad swap. VPI65OUC

TWIN: $132.99 TIGER: $126.99

VBUCKET

After Market Solutions


CWP ATTACHMENTS

SEVERE WEATHER. RELENTLESS MACHINES. With 100+ attachments to choose from, you’ll have more work options at your fingertips. Come winter, you’ll appreciate that flexibility more than ever.

Battery Rebate Offer Don’t miss these savings! Here is your chance to jump-start your savings instead of your battery. From now until December 11, 2015, save $15 on the purchase of select premium StongBox™ batteries and $10 on select Performance batteries.

PAPÉ PARTS ONLINE LED Lights

Need It.

Grab these bright specials!

Find It. Order It. Get It.

As the dark and rainy season approaches, let us help brighten up your work with Flood or Spot LED Lights, $85 each. Purchase 4 or more and save $10 each.

Visit our customer portal: pape.com/parts

Contact your local Papé Machinery store for access!

www.papemachinery.com

Parts

Special Price vs. OEM on all LED “Allied Product” Lights. RL-LED

7


John Deere’s Worksight™ technology ensures your equipment is optimized to its fullest potential for a quicker return on your investment.

JDLINK TELEMATICS / SERVICE RENEWAL $600 JDL300 Renew your JDLink telematic service and you’ll receive a $300 in-store credit you can use on your next parts, service, or rental purchases.

Contact your Customer Support Advisor and RENEW TODAY!

8

JDLink


Contact your local PapĂŠ Machinery CSA for more information.

www.papemachinery.com

JDLink

9


DIESEL FUEL FACTS

Tier 4 Diesel Engines In an effort to reduce emissions and keep our air clean, John Deere engineers are challenged to convert one gallon of diesel into the most efficient emissions compliant fuel ever to run our modern Tier 4 diesel engines. John Deere has developed a method for precise fuel control called High Pressure Common Rail (HPCR) fuel systems. HPCR systems operate at much higher fuel pressures than most other fuel systems, approaching pressures of 44,000 PSI. John Deere specifications around fuel quality and fuel conditions are vital to an engine’s performance, reliability, and durability.

10

Storage of Diesel: • • • • • •

Must meet local laws and regulations. Fully functional caps and vents equipped with desiccant breathers for moisture removal Keep tanks reasonably full to limit condensation and freezing. Allow 24 hours for new fuel to settle before using, if possible. Should have a well-serviced filter between pump and nozzle Tank should be low on opposite end of pump pick-up to allow water and sediment to accumulate for regular draining and servicing. If storage will be over 6 months with standard diesel, consult your fuel supplier for algae control and recommended additives. This is even more important with bio-fuel. Test tank on frequent basis for water and algae.

Always purchase diesel fuel from a reputable source: • • • • • • •

John Deere requires fuel that meets ASTM D-975. Cetane (number of 45 minimum): This number determines ability to start. Cold Filter Plugging Point (CFPP): This should be 9° F below lowest expected temperature. Fuel Lubricity: Should pass a minimum scar diameter of 0.45mm as measured by ASTM D-6079 or ISO 12156.1 Particulates: Should be less than or equal to 10 mg/L per ASTM D2276 test method. Do not pre-fill fuel filters due to contamination risk. Use only high quality fuel filters.

For a more complete and comprehensive understanding of fuel and related subjects such as bio-fuel, call Papé Machinery. - Jim Carter, Sales Engineer with over 55 years of experience

C a r t e r ’s C o r n e r


Winter Filter Special

VorTEQ™ Emissions Reduction System

Stock Up and Save... 10% off oil and fuel filters 15% off case purchase

OEM Designed, Diesel Particulate Filter (DPF) solutions for select legacy John Deere equipment.

*OEM John Deere Filters

DIESEL FUEL CONDITIONING

Oil Filters

Dirty oil will slow you down, leading to less productivity and shorter service intervals. That’s why John Deere oil filters are tested to make sure they capture more dust than lesser-quality filters.

When was the last time you tested the fuel in your storage tank? Contamination and algae growth can limit engine performance, reduce filter life, and cause significant injector or engine damage. Modern diesel engines are more sensitive to contaminants than ever, making fuel testing a necessary part of fuel storage. You can count on Papé Machinery as your source for complete fuel testing and treatment supplies.

Air Filters

Fuel Filters

John Deere air filters are another high-quality line of defense against contaminants invading your engine. They reduce engine wear by removing dust, dirt, and other pollutants from intake air.

John Deere fuel filters have coated media that keep water out, preventing rust and microbial growth that could damage your fuel and lead to poor fuel economy.

www.papemachinery.com

Let us keep your diesel engine performance at the highest level.

WINTFILL

Ask Us About These Valuable Programs!

Fluid & Filters

Verified, level 3 DPF’s can reduce PM emissions by a minimum of 85%. VorTEQ™ is a stand alone system and does not interact with vehicle electronic or operator monitor systems.

Diesel Fuel Conditioner Stock Up and Save...

Buy three, get one free Year-round use to improve diesel fuel quality and maintain peak engine efficiency. Maximize fuel economy and extend filter life. WINTDIES

11


HANDHELD COMPACTION PRODUCTS

TRY AND BUY SALES PROGRAM Get $500 or $350 trade-in allowance for your used rammer or vibratory plate!* *Competitor equipment only. ACREBATE

Simple! Try one of the pieces of

equipment shown for 30 days and we’ll give you $500 (rammer) or $350 (plate) trade-in allowance for any competitive brand of rammer or vibratory plate when you purchase a new one.

No Trade-in? No problem. Ask about discount opportunities. Contact your local Papé Machinery CSA.

Award winning rammer!

LT 5005

p/n 3382000258

12

LT 6005

p/n 3382000359

LF75 LAT

p/n 3382000023

Atlas Copco

LF100 LAT

p/n 3382000027


RUN WITH THE PACK The highest-production, longest-lasting breed of inserts ever made, period.

ALPHA® WOLF CLAW®

WOLF BITE®

LONE WOLF® WEARWOLF®

Morbark Wolf Pack® Inserts are built like Morbark equipment—robust, rugged and reliable— to give you tons more production and less downtime. There’s a Wolf Pack® insert for every application, from the Alpha®, made with the highest carbide saturation on the market, to the razor‑sharp Wearwolf® that rips through any wood you can feed it.

Find out more at morbark.com/wolfpack or contact your local Papé dealership.

www.papemachinery.com

Morbark

13


Rebuilt or Reman?

REMAN RELIFE

REMAN = Better Parts, Better Support, Real Fast Reman engines from Deere have better turnaround time, 100% Deere parts, and are tested to OEM specifications. Purchase a Deere Reman engine, have us install it, and we’ll throw in a 1 year/unlimited hour warranty. Check out some of the value offered by John Deere Reman components: • • • •

Electronic Components Transmissions Starters and Alternators Fuel Systems

Time running out on your machine?

Extend your machine’s life with the John Deere Reman ReLife Program!

Ask Any Parts Team Member For More Information!

14

Time takes a toll on your machine’s powertrain. With the John Deere Reman Reload program, you can extend the life of your machine, while keeping your operating costs low. The program includes: - Complete machine inspection by a factory-certified technician - Complete set of John Deere Reman powertrain components - Three-year/5,000-hour powertrain warranty Financing options are available! Ask us how the Reman Reload program can be a part of a customized machine-rebuild plan.

Reman Components


Powertrain Tune-up / Excavator Power Tune

LOG LOADER POWER-TUNE Increase fuel economy and production by doing a Power-Tune on your Log Loader • • •

Get Your Machine Ready For the Busy Season

Hydraulic systems wear over time. Get your pressures back up to factory settings. Low pressure creates heat. The engine burns more fuel to cool and compensate for low pressures. Incorrect settings add friction to the systems requiring power to feed trees, resulting in wasted horsepower and increased wear and tear.

*Includes FREE travel up to 50 miles from our closest location

EXPTUNE

Complete machine inspection, performance test readings, oil sampling and repair recommendations. Starting at $950 plus tax, includes up to two hours of travel.

Deere & Hitachi Excavators $595* Backhoes, Crawlers, Graders and 4WD Loaders $295*

Hydraulic Hose Assembly FORPTUNE

Custom Hose Made While you Wait...

Buy 1, Get 1 50% Off

A Division of Allied Systems Company

We can assemble hoses while you wait. Papé is proud to offer Parker hydraulic hoses and fittings.

BOGOHOSE

Inspect & Adjust Get Your Engine Back in Shape...

$320 inspection and adjustment Available for all Non-IT4 & FT4 units. Have one of our certified, trained technicians inspect your engine and make the necessary adjustments to your valve train engine. INSPECT

www.papemachinery.com

Forestry

15


PO Box 10527 Eugene, OR 97440

®

For over 75 years, hardworking equipment owners and operators have relied on Papé for consistent quality customer service. Our unparalleled commitment to supporting you, our customer, is the cornerstone of our fourth generation, family-owned business. Whatever your equipment needs are, it’s our job to keep you moving. Our dedicated team is standing by to help you achieve success. We wish you a very prosperous 2016.

Haul Credit

Let Papé Lighten Your Load! Call us today and experience the difference that our exceptional Service Department provides. Receive a $350 haul credit for any in-shop repairs over $3,000.

WINTHAUL

T h a n k y o u f o r c h o o s i n g P a p é M a c h i n e r y. We l o o k f o r w a r d t o s e r v i n g y o u !


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.