chemistry ONE UNIQUE CHEMISTRY
™
The Science Behind the Bond T H E Bond Strength After Thermocycling2 100
(Mpa)
80 60 40 20 0
0 cycle BeautiBond (BB)
5000 cycle
10000 cycle SE Bond
S3BOND (S3)
(MICROTENSILE TEST METHOD)
Bonding Durability Test
120 100
(%)
80 60 40 20 0
Depiction of adhesive interface with prepared enamel and dentin.
0 cycle SBS to enamel
5000 cycle
10000 cycle
SBS to dentin
(SHEAR BOND STRENGTH)
The strength and durability of BeautiBond has been validated through in vitro studies and multi-site clinical studies as well as SEM and TEM observation.1-3 BeautiBond, which contains 6-MHPA, has bond strength comparable to that of leading multi-component bonding systems.
■
BeautiBond delivered outstanding results in worldwide clinical trials.
■
BeautiBond demonstrated comparable bond strength to multi-component Clearfil SE Bond before and after thermocycling with a simplified bonding procedure.
w w w . s h o f u . c o m
| | | | | |
| References 1. Uno S, Morigami M, Sugizaki J, Yamada T. SEM and TEM observation of the bonding interface created with an experimental one-bottle one-step resin bonding agent. Adhes Dent 2008;26(1):30-35.
| | | | | |
|
2. Kawamoto O, Nagano F, Yasumoto K, Sano H. Micro-tensile bond strength of one two-step self-etching adhesives using Novel thermocycling method. Poster Presentation, 3rd IAD, 2008 Special Issue:126, Abstr P085. 3. Shinno K, Ichizawa K, Nakatsuka T, et al. Bonding ability of resin-bonding systems containing phosphonic acid adhesive monomer. J Dent Res 2008, Abstr#0394.
| | |
|
1 - 8 0 0 - 8 2 7 - 4 6 3 8
Order Information • Part Number 1782 • BeautiBond Unit Dose 0.1mL • 50/Box • 50 Microbrush Fine (pink) • Directions for Use
|
|
| | | | |
■
Clearfil SE Bond and S3 Bond are trademarks of Kuraray Dental.
| |
|
|
|
|
USA Shofu Dental Corporation 1225 Stone Drive San Marcos, CA 92078-4059, USA
JAPAN Shofu Inc. 11 Kamitakamatsu-cho Fukuine, Higashiyama-kuu Kyoto 605-0983, Japan
SINGAPORE Shofu In. Singapore Branch 10 Science Park Road #03-12 The Alpha, Science Park II Singapore 117684
U.K. Shofu Dental Products Ltd. Duke’s Factory Chiddingstone Causeway Tonbridge Kent, TN11 8JU, UK
CHINA Shofu Dental Supplies (Shanghai) Co. Ltd. No.645 Jiye Road Seshan Industry Park Songjang 201602, Shanghai, China
GERMANY EU Representative: Shofu Dental GmbH Am Brüll 17 40878 Ratingen, Germany
SN108-0209
S C I E N C E
B E H I N D
T H E
B O N D
™
™
DUAL ADHESIVE THE POWER OF ONE |
CASE STUDY
™
The Power of One
One Adhesive: Two Powerful Monomers
H
istorically, a major weakness of single
One: Preoperative view of carious tooth structure that will be repaired with a direct resin procedure.
Dual Adhesive Monomers1 BeautiBond’s phosphonic acid monomer enhances enamel bonding and its carboxylic acid monomer facilitates bonding to dentin.
component dental adhesives has been inconsistent bonding, especially to
MONOMERS
enamel. Providing convenience and efficacy in
adhesives. With bond strengths similar to leading
Bond Strength The enhanced bond strength of BeautiBond rivals that of leading sixth-generation adhesives—but with the convenience of a seventh-generation material.
sixth-generation alternatives, BeautiBond is the one-step self-etch adhesive for a wide range of clinical indications. Its dual adhesive monomers enable predictable long-term bonding to both
E
Two: Conservative tooth preparation completed and readied for application of singlestep BeautiBond adhesive.
advantage over other seventh-generation
U
DEN TI
N
IN G S
AC RF
a single application, BeautiBond has a distinct
ND BO
■ Single coat for shorter working time
Three: Postoperative view following successful restoration using BeautiBond adhesive and composite resin bonding.
■ Only 5µm film thickness ■ Limits the risk of postoperative sensitivity Convenient Unit Dose The stable bottle design of BeautiBond provides for excellent chairside handling.
|
Phosphonic acid monomer Carboxylic acid monomer CLINICAL PHOTOGRAPHS COURTESY OF DR. KANAMURA
| | | | | |
1
| |
| | | | |
ONE CONVENIENT MATERIAL
3
4
5
|
Featuring a stable, unit dose delivery, BeautiBond is fast and easy to use. A single application of the dual adhesive monomers requires just 30 seconds for a durable, predictable bond. High bond strength is achieved due to its HEMA-free composition and incorporation of a new polymerization catalyst.
2
| | |
| | | | | |
|
|
One: Snap off cap.
BeautiBond Unit Dose 50/boxP/N 1782
Two: Insert a brush to dispense.
Three: Apply BeautiBond and leave for 10 seconds.
Four: Gently air dry for approximately 3 seconds then blow with more force.
Five: Light cure with a halogen (10 seconds) or LED (5 seconds) curing light.
D) Dentin Surface B) BeautiBondTM
DING SU BON R
E
Thin (5 µm) Bonding Layer1 A low film thickness for better adaptation of aesthetic restorative materials.
EL
C FA
■ Unique dual adhesive monomers deliver equal bond strength to enamel and dentin
EN AM
enamel AND dentin.
E) Enamel Surface CR) Composite Resin
The phosphonic acid monomer of Beautibond is more stable than phosphoric acid and enhances bonding to tooth enamel. Its carboxylic acid monomer facilitates a strong bond to dentin. ■ Phosphonic acid monomer ■ Carboxylic acid monomer
|
| |
|
|